drivers

README

TinyGo Drivers

This package provides a collection of hardware drivers for devices that can be used together with TinyGo.

Installing

go get tinygo.org/x/drivers

How to use

Here is an example in TinyGo that uses the BMP180 digital barometer:

package main

import (
    "time"

    "machine"

    "tinygo.org/x/drivers/bmp180"
)

func main() {
    machine.I2C0.Configure(machine.I2CConfig{})
    sensor := bmp180.New(machine.I2C0)
    sensor.Configure()

    connected := sensor.Connected()
    if !connected {
        println("BMP180 not detected")
        return
    }
    println("BMP180 detected")

    for {
        temp, _ := sensor.ReadTemperature()
        println("Temperature:", float32(temp)/1000, "ºC")

        pressure, _ := sensor.ReadPressure()
        println("Pressure", float32(pressure)/100000, "hPa")

        time.Sleep(2 * time.Second)
    }
}

Currently supported devices

Device Name	Interface Type
ADXL345 accelerometer	I2C
APA102 RGB LED	SPI
AT24CX 2-wire serial EEPROM	I2C
BH1750 ambient light sensor	I2C
BlinkM RGB LED	I2C
BME280 humidity/pressure sensor	I2C
BMP180 barometer	I2C
Buzzer	GPIO
DS1307 real time clock	I2C
DS3231 real time clock	I2C
"Easystepper" stepper motor controller	GPIO
ESP8266/ESP32 AT Command set for WiFi/TCP/UDP	UART
GPS module	I2C/UART
HUB75 RGB led matrix	SPI
LIS3DH accelerometer	I2C
LSM6DS3 accelerometer	I2C
MAG3110 magnetometer	I2C
BBC micro:bit LED matrix	GPIO
Microphone - PDM	I2S/PDM
MMA8653 accelerometer	I2C
MPU6050 accelerometer/gyroscope	I2C
PCD8544 display	SPI
SHT3x Digital Humidity Sensor	I2C
SSD1306 OLED display	I2C / SPI
SSD1331 TFT color display	SPI
ST7735 TFT color display	SPI
ST7789 TFT color display	SPI
Thermistor	ADC
VL53L1X time-of-flight distance sensor	I2C
Waveshare 2.13" e-paper display	SPI
Waveshare 2.13" (B & C) e-paper display	SPI
WS2812 RGB LED	GPIO

Contributing

Your contributions are welcome!

Please take a look at our CONTRIBUTING.md document for details.

License

This project is licensed under the BSD 3-clause license, just like the Go project itself.

Documentation

Overview

Package drivers provides a collection of hardware drivers for devices that can be used together with TinyGo (https://tinygo.org).

Here is an example in TinyGo that uses the BMP180 digital barometer:

package main

import (
	"time"
	"machine"

	"github.com/tinygo-org/drivers/bmp180"
)

func main() {
	machine.I2C0.Configure(machine.I2CConfig{})
	sensor := bmp180.New(machine.I2C0)
	sensor.Configure()

	connected := sensor.Connected()
	if !connected {
		println("BMP180 not detected")
		return
	}
	println("BMP180 detected")

	for {
		temp, _ := sensor.ReadTemperature()
		println("Temperature:", float32(temp)/1000, "ºC")

		pressure, _ := sensor.ReadPressure()
		println("Pressure", float32(pressure)/100000, "hPa")

		time.Sleep(2 * time.Second)
	}
}

Each individual driver is contained within its own sub-package within this package and there are no interdependencies in order to minimize the final size of compiled code that uses any of these drivers.

Index

• type Displayer

Types

type Displayer

type Displayer interface {
	// Size returns the current size of the display.
	Size() (x, y int16)

	// SetPizel modifies the internal buffer.
	SetPixel(x, y int16, c color.RGBA)

	// Display sends the buffer (if any) to the screen.
	Display() error
}