examples/

Details

Valid go.mod file

The Go module system was introduced in Go 1.11 and is the official dependency management solution for Go.
Redistributable license

Redistributable licenses place minimal restrictions on how software can be used, modified, and redistributed.
Tagged version

Modules with tagged versions give importers more predictable builds.
Stable version

When a project reaches major version v1 it is considered stable.
Learn more about best practices

Repository

Links

Open Source Insights

Directories ¶

Path	Synopsis
adt7410
adxl345
apa102 Connects to an APA102 SPI RGB LED strip with 30 LEDS.	Connects to an APA102 SPI RGB LED strip with 30 LEDS.
itsybitsy-m0 This example demostrates how to control the "Dotstar" (APA102) LED included on the Adafruit Itsy Bitsy M0 board.	This example demostrates how to control the "Dotstar" (APA102) LED included on the Adafruit Itsy Bitsy M0 board.
at24cx
bh1750
blinkm Connects to an BlinkM I2C RGB LED.	Connects to an BlinkM I2C RGB LED.
bme280
bmp180
buzzer
ds1307
sram
time
ds3231 Connects to an MAG3110 I2C magnetometer.	Connects to an MAG3110 I2C magnetometer.
easystepper
espat
espconsole This is a console to a ESP8266/ESP32 running on the device UART1.	This is a console to a ESP8266/ESP32 running on the device UART1.
esphub This is a sensor hub that uses a ESP8266/ESP32 running on the device UART1.	This is a sensor hub that uses a ESP8266/ESP32 running on the device UART1.
espstation This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
mqttclient This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
mqttsub This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
tcpclient This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
gps
i2c
uart
hd44780
customchar
text
hub75
gopherimg
ili9341
basic
pyportal_boing Port of Adafruit's "pyportal_boing" demo found here: https://github.com/adafruit/Adafruit_ILI9341/blob/master/examples/pyportal_boing	Port of Adafruit's "pyportal_boing" demo found here: https://github.com/adafruit/Adafruit_ILI9341/blob/master/examples/pyportal_boing
pyportal_boing/graphics
l293x
simple
speed
l9110x
simple
speed
lis3dh Connects to a LIS3DH I2C accelerometer on the Adafruit Circuit Playground Express.	Connects to a LIS3DH I2C accelerometer on the Adafruit Circuit Playground Express.
lsm6ds3 Connects to an LSM6DS3 I2C a 6 axis Inertial Measurement Unit (IMU)	Connects to an LSM6DS3 I2C a 6 axis Inertial Measurement Unit (IMU)
mag3110 Connects to an MAG3110 I2C magnetometer.	Connects to an MAG3110 I2C magnetometer.
mcp3008 Connects to a MCP3008 ADC via SPI.	Connects to a MCP3008 ADC via SPI.
microbitmatrix
microphone Example using the i2s hardware interface on the Adafruit Circuit Playground Express to read data from the onboard MEMS microphone.	Example using the i2s hardware interface on the Adafruit Circuit Playground Express to read data from the onboard MEMS microphone.
mma8653 Connects to an MMA8653 I2C accelerometer.	Connects to an MMA8653 I2C accelerometer.
mpu6050 Connects to an MPU6050 I2C accelerometer/gyroscope.	Connects to an MPU6050 I2C accelerometer/gyroscope.
pcd8544
setbuffer
setbuffer/data
setpixel
shifter
sht3x
ssd1306
i2c_128x32
spi_128x64
ssd1331
st7735
st7789
thermistor This example uses the settings for the thermistor that is built in to the Adafruit Circuit Playground Express.	This example uses the settings for the thermistor that is built in to the Adafruit Circuit Playground Express.
touch
resistive/fourwire demo of 4-wire touchscreen as described in app note: http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf	demo of 4-wire touchscreen as described in app note: http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf
resistive/pyportal_touchpaint
veml6070
vl53l1x
waveshare-epd
epd2in13
epd2in13x
wifinina
mqttclient This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
mqttsub This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.	This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
tcpclient This example opens a TCP connection using a device with WiFiNINA firmware and sends some data, for the purpose of testing speed and connectivity.	This example opens a TCP connection using a device with WiFiNINA firmware and sends some data, for the purpose of testing speed and connectivity.
webclient This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example: https://github.com/arduino-libraries/WiFiNINA/blob/master/examples/WiFiWebClientRepeating/	This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example: https://github.com/arduino-libraries/WiFiNINA/blob/master/examples/WiFiWebClientRepeating/
ws2812 Connects to an WS2812 RGB LED strip with 10 LEDS.	Connects to an WS2812 RGB LED strip with 10 LEDS.

?	: This menu
/	: Search site
f or F	: Jump to
y or Y	: Canonical URL