diagnostic

command
v26.1.1+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Apr 30, 2024 License: Apache-2.0 Imports: 14 Imported by: 0

README


description: Learn to use the built-in network debugger to debug overlay networking problems keywords: network, troubleshooting, debug title: Debug overlay or swarm networking issues

WARNING This tool can change the internal state of the libnetwork API, be really mindful on its use and read carefully the following guide. Improper use of it will damage or permanently destroy the network configuration.

Docker CE 17.12 and higher introduce a network debugging tool designed to help debug issues with overlay networks and swarm services running on Linux hosts. When enabled, a network diagnostic server listens on the specified port and provides diagnostic information. The network debugging tool should only be started to debug specific issues, and should not be left running all the time.

Information about networks is stored in the database, which can be examined using the API. Currently the database contains information about the overlay network as well as the service discovery data.

The Docker API exposes endpoints to query and control the network debugging tool. CLI integration is provided as a preview, but the implementation is not yet considered stable and commands and options may change without notice.

The tool is available into 2 forms:

  1. client only: dockereng/network-diagnostic:onlyclient
  2. docker in docker version: dockereng/network-diagnostic:17.12-dind The latter allows to use the tool with a cluster running an engine older than 17.12

Enable the diagnostic server

The tool currently only works on Docker hosts running on Linux. To enable it on a node follow the step below.

  1. Set the network-diagnostic-port to a port which is free on the Docker host, in the /etc/docker/daemon.json configuration file.

    “network-diagnostic-port”: <port>
    
  2. Get the process ID (PID) of the dockerd process. It is the second field in the output, and is typically a number from 2 to 6 digits long.

    $ ps aux |grep dockerd | grep -v grep
    
  3. Reload the Docker configuration without restarting Docker, by sending the HUP signal to the PID you found in the previous step.

    kill -HUP <pid-of-dockerd>
    

If systemd is used the command systemctl reload docker will be enough

A message like the following will appear in the Docker host logs:

Starting the diagnostic server listening on <port> for commands

Disable the diagnostic tool

Repeat these steps for each node participating in the swarm.

  1. Remove the network-diagnostic-port key from the /etc/docker/daemon.json configuration file.

  2. Get the process ID (PID) of the dockerd process. It is the second field in the output, and is typically a number from 2 to 6 digits long.

    $ ps aux |grep dockerd | grep -v grep
    
  3. Reload the Docker configuration without restarting Docker, by sending the HUP signal to the PID you found in the previous step.

    kill -HUP <pid-of-dockerd>
    

A message like the following will appear in the Docker host logs:

Disabling the diagnostic server

Access the diagnostic tool's API

The network diagnostic tool exposes its own RESTful API. To access the API, send a HTTP request to the port where the tool is listening. The following commands assume the tool is listening on port 2000.

Examples are not given for every endpoint.

Get help

$ curl localhost:2000/help

OK
/updateentry
/getentry
/gettable
/leavenetwork
/createentry
/help
/clusterpeers
/ready
/joinnetwork
/deleteentry
/networkpeers
/
/join

Join or leave the network database cluster

$ curl localhost:2000/join?members=ip1,ip2,...
$ curl localhost:2000/leave?members=ip1,ip2,...

ip1, ip2, ... are the swarm node ips (usually one is enough)

Join or leave a network

$ curl localhost:2000/joinnetwork?nid=<network id>
$ curl localhost:2000/leavenetwork?nid=<network id>

network id can be retrieved on the manager with docker network ls --no-trunc and has to be the full length identifier

List cluster peers

$ curl localhost:2000/clusterpeers

List nodes connected to a given network

$ curl localhost:2000/networkpeers?nid=<network id>

network id can be retrieved on the manager with docker network ls --no-trunc and has to be the full length identifier

Dump database tables

The tables are called endpoint_table and overlay_peer_table. The overlay_peer_table contains all the overlay forwarding information The endpoint_table contains all the service discovery information

$ curl localhost:2000/gettable?nid=<network id>&tname=<table name>

Interact with a specific database table

The tables are called endpoint_table and overlay_peer_table.

$ curl localhost:2000/<method>?nid=<network id>&tname=<table name>&key=<key>[&value=<value>]

Note: operations on tables have node ownership, this means that are going to remain persistent till the node that inserted them is part of the cluster

Access the diagnostic tool's CLI

The CLI is provided as a preview and is not yet stable. Commands or options may change at any time.

The CLI executable is called diagnosticClient and is made available using a standalone container.

docker run --net host dockereng/network-diagnostic:onlyclient -v -net <full network id> -t sd

The following flags are supported:

Flag Description
-t Table one of sd or overlay.
-ip The IP address to query. Defaults to 127.0.0.1.
-net The target network ID.
-port The target port. (default port is 2000)
-a Join/leave network
-v Enable verbose output.

NOTE By default the tool won't try to join the network. This is following the intent to not change the state on which the node is when the diagnostic client is run. This means that it is safe to run the diagnosticClient against a running daemon because it will just dump the current state. When using instead the diagnosticClient in the containerized version the flag -a MUST be passed to avoid retrieving empty results. On the other side using the -a flag against a loaded daemon will have the undesirable side effect to leave the network and so cutting down the data path for that daemon.

Container version of the diagnostic tool

The CLI is provided as a container with a 17.12 engine that needs to run using privileged mode. NOTE Remember that table operations have ownership, so any create entry will be persistent till the diagnostic container is part of the swarm.

  1. Make sure that the node where the diagnostic client will run is not part of the swarm, if so do docker swarm leave -f

  2. To run the container, use a command like the following:

    $ docker container run --name net-diagnostic -d --privileged --network host dockereng/network-diagnostic:17.12-dind
    
  3. Connect to the container using docker exec -it <container-ID> sh, and start the server using the following command:

    $ kill -HUP 1
    
  4. Join the diagnostic container to the swarm, then run the diagnostic CLI within the container.

    $ ./diagnosticClient <flags>...
    
  5. When finished debugging, leave the swarm and stop the container.

Examples

The following commands dump the service discovery table and verify node ownership.

NOTE Remember to use the full network ID, you can easily find that with docker network ls --no-trunc

Service discovery and load balancer:

$ diagnostiClient -t sd -v -net n8a8ie6tb3wr2e260vxj8ncy4 -a

Overlay network:

$ diagnostiClient -port 2001 -t overlay -v -net n8a8ie6tb3wr2e260vxj8ncy4 -a

Documentation

The Go Gopher

There is no documentation for this package.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL