chaincfg

package module
v3.0.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 23, 2021 License: ISC Imports: 10 Imported by: 5

README

chaincfg

Build Status ISC License Doc

Package chaincfg defines chain configuration parameters for the four standard Decred networks.

Although this package was primarily written for dcrd, it has intentionally been designed so it can be used as a standalone package for any projects needing to use parameters for the standard Decred networks or for projects needing to define their own network.

Sample Use

package main

import (
	"flag"
	"fmt"
	"log"

	"github.com/John-Tonny/vclsuite_vcld/vclutil/v2"
	"github.com/John-Tonny/vclsuite_vcld/chaincfg/v2"
)

var testnet = flag.Bool("testnet", false, "operate on the testnet Decred network")

// By default (without -testnet), use mainnet.
var chainParams = chaincfg.MainNetParams()

func main() {
	flag.Parse()

	// Modify active network parameters if operating on testnet.
	if *testnet {
		chainParams = chaincfg.TestNet3Params()
	}

	// later...

	// Create and print new payment address, specific to the active network.
	pubKeyHash := make([]byte, 20)
	addr, err := btcutil.NewAddressPubKeyHash(pubKeyHash, chainParams)
	if err != nil {
		log.Fatal(err)
	}
	fmt.Println(addr)
}

Installation and Updating

$ go get -u github.com/John-Tonny/vclsuite_vcld/chaincfg

License

Package chaincfg is licensed under the copyfree ISC License.

Documentation

Overview

Package chaincfg defines chain configuration parameters.

In addition to the main Decred network, which is intended for the transfer of monetary value, there also exists two currently active standard networks: regression test and testnet (version 0). These networks are incompatible with each other (each sharing a different genesis block) and software should handle errors where input intended for one network is used on an application instance running on a different network.

For library packages, chaincfg provides the ability to lookup chain parameters and encoding magics when passed a *Params. Older APIs not updated to the new convention of passing a *Params may lookup the parameters for a wire.DecredNet using ParamsForNet, but be aware that this usage is deprecated and will be removed from chaincfg in the future.

For main packages, a (typically global) var may be assigned the address of one of the standard Param vars for use as the application's "active" network. When a network parameter is needed, it may then be looked up through this variable (either directly, or hidden in a library call). 

package main

import (
        "flag"
        "fmt"
        "log"

        "github.com/John-Tonny/vclsuite_vcld/vclutil/v2"
        "github.com/John-Tonny/vclsuite_vcld/chaincfg/v3"
)

var testnet = flag.Bool("testnet", false, "operate on the testnet Decred network")

// By default (without -testnet), use mainnet.
var chainParams = chaincfg.MainNetParams()

func main() {
        flag.Parse()

        // Modify active network parameters if operating on testnet.
        if *testnet {
                chainParams = chaincfg.TestNet3Params()
        }

        // later...

        // Create and print new payment address, specific to the active network.
        pubKeyHash := make([]byte, 20)
        addr, err := vclutil.NewAddressPubKeyHash(pubKeyHash, chainParams)
        if err != nil {
                log.Fatal(err)
        }
        fmt.Println(addr)
}

If an application does not use one of the standard Decred networks, a new Params struct may be created which defines the parameters for the non-standard network. As a general rule of thumb, all network parameters should be unique to the network, but parameter collisions can still occur.

Index

Constants

View Source 
const (
	// VoteIDMaxBlockSize is the vote ID for the maximum block size
	// increase agenda used for the hard fork demo.
	VoteIDMaxBlockSize = "maxblocksize"

	// VoteIDSDiffAlgorithm is the vote ID for the new stake difficulty
	// algorithm (aka ticket price) agenda defined by DCP0001.
	VoteIDSDiffAlgorithm = "sdiffalgorithm"

	// VoteIDLNSupport is the vote ID for determining if the developers
	// should work on integrating Lightning Network support.
	VoteIDLNSupport = "lnsupport"

	// VoteIDLNFeatures is the vote ID for the agenda that introduces
	// features useful for the Lightning Network (among other uses) defined
	// by DCP0002 and DCP0003.
	VoteIDLNFeatures = "lnfeatures"

	// VoteIDFixLNSeqLocks is the vote ID for the agenda that corrects the
	// sequence lock functionality needed for Lightning Network (among other
	// uses) defined by DCP0004.
	VoteIDFixLNSeqLocks = "fixlnseqlocks"

	// VoteIDHeaderCommitments is the vote ID for the agenda that repurposes
	// the stake root header field to support header commitments and provides
	// an initial commitment to version 2 GCS filters defined by DCP0005.
	VoteIDHeaderCommitments = "headercommitments"

	// VoteIDTreasury is the vote ID for the agenda that enables the
	// decentralized treasury opcodes defined by DCP0006.
	VoteIDTreasury = "treasury"
)

Variables

This section is empty.

Functions

This section is empty.

Types

type Checkpoint 

type Checkpoint struct {
	Height int64
	Hash   *chainhash.Hash
}

Checkpoint identifies a known good point in the block chain. Using checkpoints allows a few optimizations for old blocks during initial download and also prevents forks from old blocks.

Each checkpoint is selected based upon several factors. See the documentation for chain.IsCheckpointCandidate for details on the selection criteria.

type Choice 

type Choice struct {
	// Single unique word identifying vote (e.g. yes)
	Id string

	// Longer description of the vote.
	Description string

	// Bits used for this vote.
	Bits uint16

	// This is the abstain choice.  By convention this must be the 0 vote
	// (abstain) and exist only once in the Vote.Choices array.
	IsAbstain bool

	// This choice indicates a hard No Vote.  By convention this must exist
	// only once in the Vote.Choices array.
	IsNo bool
}

Choice defines one of the possible Choices that make up a vote. The 0 value in Bits indicates the default choice. Care should be taken not to bias a vote with the default choice.

type ConsensusDeployment 

type ConsensusDeployment struct {
	// Vote describes the what is being voted on and what the choices are.
	// This is sitting in a struct in order to make merging between btcd
	// easier.
	Vote Vote

	// StartTime is the median block time after which voting on the
	// deployment starts.
	StartTime uint64

	// ExpireTime is the median block time after which the attempted
	// deployment expires.
	ExpireTime uint64
}

ConsensusDeployment defines details related to a specific consensus rule change that is voted in. This is part of BIP0009.

type DNSSeed deprecated 

type DNSSeed struct {
	// Host defines the hostname of the seed.
	Host string

	// HasFiltering defines whether the seed supports filtering
	// by service flags (wire.ServiceFlag).
	HasFiltering bool
}

DNSSeed identifies a DNS seed.

Deprecated: This will be removed in the next major version bump.

func (DNSSeed) String 

func (d DNSSeed) String() string

String returns the hostname of the DNS seed in human-readable form.

type Params 

type Params struct {
	// Name defines a human-readable identifier for the network.
	Name string

	// Net defines the magic bytes used to identify the network.
	Net wire.CurrencyNet

	// DefaultPort defines the default peer-to-peer port for the network.
	DefaultPort string

	// DNSSeeds defines a list of DNS seeds for the network that are used
	// as one method to discover peers.
	//
	// Deprecated: This will be removed in the next major version bump.
	DNSSeeds []DNSSeed

	// GenesisBlock defines the first block of the chain.
	GenesisBlock *wire.MsgBlock

	// GenesisHash is the starting block hash.
	GenesisHash chainhash.Hash

	// PowLimit defines the highest allowed proof of work value for a block
	// as a uint256.
	PowLimit *big.Int

	// PowLimitBits defines the highest allowed proof of work value for a
	// block in compact form.
	PowLimitBits uint32

	// ReduceMinDifficulty defines whether the network should reduce the
	// minimum required difficulty after a long enough period of time has
	// passed without finding a block.  This is really only useful for test
	// networks and should not be set on a main network.
	ReduceMinDifficulty bool

	// MinDiffReductionTime is the amount of time after which the minimum
	// required difficulty should be reduced when a block hasn't been found.
	//
	// NOTE: This only applies if ReduceMinDifficulty is true.
	MinDiffReductionTime time.Duration

	// GenerateSupported specifies whether or not CPU mining is allowed.
	GenerateSupported bool

	// MaximumBlockSizes are the maximum sizes of a block that can be
	// generated on the network.  It is an array because the max block size
	// can be different values depending on the results of a voting agenda.
	// The first entry is the initial block size for the network, while the
	// other entries are potential block size changes which take effect when
	// the vote for the associated agenda succeeds.
	MaximumBlockSizes []int

	// MaxTxSize is the maximum number of bytes a serialized transaction can
	// be in order to be considered valid by consensus.
	MaxTxSize int

	// TargetTimePerBlock is the desired amount of time to generate each
	// block.
	TargetTimePerBlock time.Duration

	// WorkDiffAlpha is the stake difficulty EMA calculation alpha (smoothing)
	// value. It is different from a normal EMA alpha. Closer to 1 --> smoother.
	WorkDiffAlpha int64

	// WorkDiffWindowSize is the number of windows (intervals) used for calculation
	// of the exponentially weighted average.
	WorkDiffWindowSize int64

	// WorkDiffWindows is the number of windows (intervals) used for calculation
	// of the exponentially weighted average.
	WorkDiffWindows int64

	// TargetTimespan is the desired amount of time that should elapse
	// before the block difficulty requirement is examined to determine how
	// it should be changed in order to maintain the desired block
	// generation rate.  This value should correspond to the product of
	// WorkDiffWindowSize and TimePerBlock above.
	TargetTimespan time.Duration

	// RetargetAdjustmentFactor is the adjustment factor used to limit
	// the minimum and maximum amount of adjustment that can occur between
	// difficulty retargets.
	RetargetAdjustmentFactor int64

	// BaseSubsidy is the starting subsidy amount for mined blocks.
	BaseSubsidy int64

	// Subsidy reduction multiplier.
	MulSubsidy int64

	// Subsidy reduction divisor.
	DivSubsidy int64

	// SubsidyReductionInterval is the reduction interval in blocks.
	SubsidyReductionInterval int64

	// WorkRewardProportion is the comparative amount of the subsidy given for
	// creating a block.
	WorkRewardProportion uint16

	// StakeRewardProportion is the comparative amount of the subsidy given for
	// casting stake votes (collectively, per block).
	StakeRewardProportion uint16

	// BlockTaxProportion is the inverse of the percentage of funds for each
	// block to allocate to the developer organization.
	// e.g. 10% --> 10 (or 1 / (1/10))
	// Special case: disable taxes with a value of 0
	BlockTaxProportion uint16

	// Checkpoints ordered from oldest to newest.
	Checkpoints []Checkpoint

	// MinKnownChainWork is the minimum amount of known total work for the chain
	// at a given point in time.  This is intended to be updated periodically
	// with new releases.  It may be nil for networks that do not require it.
	MinKnownChainWork *big.Int

	// These fields are related to voting on consensus rule changes as
	// defined by BIP0009.
	//
	// RuleChangeActivationQurom is the number of votes required for a vote
	// to take effect.
	//
	// RuleChangeActivationInterval is the number of blocks in each threshold
	// state retarget window.
	//
	// Deployments define the specific consensus rule changes to be voted
	// on for the stake version (the map key).
	RuleChangeActivationQuorum     uint32
	RuleChangeActivationMultiplier uint32
	RuleChangeActivationDivisor    uint32
	RuleChangeActivationInterval   uint32
	Deployments                    map[uint32][]ConsensusDeployment

	// Enforce current block version once network has upgraded.
	BlockEnforceNumRequired uint64

	// Reject previous block versions once network has upgraded.
	BlockRejectNumRequired uint64

	// The number of nodes to check.
	BlockUpgradeNumToCheck uint64

	// AcceptNonStdTxs is a mempool param to either accept and relay
	// non standard txs to the network or reject them
	AcceptNonStdTxs bool

	// NetworkAddressPrefix is the first letter of the network
	// for any given address encoded as a string.
	NetworkAddressPrefix string

	// Address encoding magics
	PubKeyAddrID     [2]byte // First 2 bytes of a P2PK address
	PubKeyHashAddrID [2]byte // First 2 bytes of a P2PKH address
	PKHEdwardsAddrID [2]byte // First 2 bytes of an Edwards P2PKH address
	PKHSchnorrAddrID [2]byte // First 2 bytes of a secp256k1 Schnorr P2PKH address
	ScriptHashAddrID [2]byte // First 2 bytes of a P2SH address
	PrivateKeyID     [2]byte // First 2 bytes of a WIF private key

	// BIP32 hierarchical deterministic extended key magics
	HDPrivateKeyID [4]byte
	HDPublicKeyID  [4]byte

	// SLIP-0044 registered coin type used for BIP44, used in the hierarchical
	// deterministic path for address generation.
	// All SLIP-0044 registered coin types are defined here:
	// https://github.com/satoshilabs/slips/blob/master/slip-0044.md
	SLIP0044CoinType uint32

	// Legacy BIP44 coin type used in the hierarchical deterministic path for
	// address generation. Previous name was HDCoinType, the LegacyCoinType
	// was introduced for backwards compatibility. Usually, SLIP0044CoinType
	// should be used instead.
	LegacyCoinType uint32

	// MinimumStakeDiff if the minimum amount of Atoms required to purchase a
	// stake ticket.
	MinimumStakeDiff int64

	// Ticket pool sizes for Decred PoS. This denotes the number of possible
	// buckets/number of different ticket numbers. It is also the number of
	// possible winner numbers there are.
	TicketPoolSize uint16

	// Average number of tickets per block for Decred PoS.
	TicketsPerBlock uint16

	// Number of blocks for tickets to mature (spendable at TicketMaturity+1).
	TicketMaturity uint16

	// Number of blocks for tickets to expire after they have matured. This MUST
	// be >= (StakeEnabledHeight + StakeValidationHeight).
	TicketExpiry uint32

	// CoinbaseMaturity is the number of blocks required before newly mined
	// coins (coinbase transactions) can be spent.
	CoinbaseMaturity uint16

	// Maturity for spending SStx change outputs.
	SStxChangeMaturity uint16

	// TicketPoolSizeWeight is the multiplicative weight applied to the
	// ticket pool size difference between a window period and its target
	// when determining the stake system.
	TicketPoolSizeWeight uint16

	// StakeDiffAlpha is the stake difficulty EMA calculation alpha (smoothing)
	// value. It is different from a normal EMA alpha. Closer to 1 --> smoother.
	StakeDiffAlpha int64

	// StakeDiffWindowSize is the number of blocks used for each interval in
	// exponentially weighted average.
	StakeDiffWindowSize int64

	// StakeDiffWindows is the number of windows (intervals) used for calculation
	// of the exponentially weighted average.
	StakeDiffWindows int64

	// StakeVersionInterval determines the interval where the stake version
	// is calculated.
	StakeVersionInterval int64

	// MaxFreshStakePerBlock is the maximum number of new tickets that may be
	// submitted per block.
	MaxFreshStakePerBlock uint8

	// StakeEnabledHeight is the height in which the first ticket could possibly
	// mature.
	StakeEnabledHeight int64

	// StakeValidationHeight is the height at which votes (SSGen) are required
	// to add a new block to the top of the blockchain. This height is the
	// first block that will be voted on, but will include in itself no votes.
	StakeValidationHeight int64

	// StakeBaseSigScript is the consensus stakebase signature script for all
	// votes on the network. This isn't signed in any way, so without forcing
	// it to be this value miners/daemons could freely change it.
	StakeBaseSigScript []byte

	// StakeMajorityMultiplier and StakeMajorityDivisor are used
	// to calculate the super majority of stake votes using integer math as
	// such: X*StakeMajorityMultiplier/StakeMajorityDivisor
	StakeMajorityMultiplier int32
	StakeMajorityDivisor    int32

	// OrganizationPkScript is the output script for block taxes to be
	// distributed to in every block's coinbase. It should ideally be a P2SH
	// multisignature address.  OrganizationPkScriptVersion is the version
	// of the output script.  Until PoS hardforking is implemented, this
	// version must always match for a block to validate.
	OrganizationPkScript        []byte
	OrganizationPkScriptVersion uint16

	// BlockOneLedger specifies the list of payouts in the coinbase of
	// block height 1. If there are no payouts to be given, set this
	// to an empty slice.
	BlockOneLedger []TokenPayout

	// PiKeys is the list of sanctioned Politeia keys. There should be at
	// least two of them at any given time. The corresponding private keys
	// for mainnet and testnet must be guarded with extreme prejudice. On
	// the other hand simnet and regnet have these values hardcoded for
	// easier testing.
	PiKeys [][]byte

	// TreasuryVoteInterval dictates when a TSpend transaction is allowed
	// in a block.
	TreasuryVoteInterval uint64

	// TreasuryVoteIntervalMultiplier is the multiplier to the
	// TreasuryVoteInterval that is needed to calculate Expiry.
	TreasuryVoteIntervalMultiplier uint64

	// TreasuryVoteQuorumMultiplier and TreasuryVoteQuorumDivisor are used
	// to calculate the TSpend vote quorum percentage.
	TreasuryVoteQuorumMultiplier uint64
	TreasuryVoteQuorumDivisor    uint64

	// TreasuryVoteRequiredMultiplier and TreasuryVoteRequiredDivisor are
	// used to calculate the required number of votes percentage.
	TreasuryVoteRequiredMultiplier uint64
	TreasuryVoteRequiredDivisor    uint64

	// TreasuryExpenditureWindow is the number of TVI*Multiplier windows
	// that define a single "expenditure window".
	TreasuryExpenditureWindow uint64

	// TreasuryExpenditurePolicy is the number of previous
	// TreasuryExpenditureWindows that defines how far back to calculate
	// the average expenditure of the treasury for an expenditure policy
	// check.
	TreasuryExpenditurePolicy uint64

	// TreasuryExpenditureBootstrap is the value to use as previous average
	// expenditure when there are no treasury spends inside the entire
	// window defined by TreasuryExpenditurePolicy.
	TreasuryExpenditureBootstrap uint64
	// contains filtered or unexported fields
}

Params defines a Decred network by its parameters. These parameters may be used by Decred applications to differentiate networks as well as addresses and keys for one network from those intended for use on another network.

func MainNetParams 

func MainNetParams() *Params

MainNetParams returns the network parameters for the main Decred network.

func RegNetParams 

func RegNetParams() *Params

RegNetParams returns the network parameters for the regression test network. This should not be confused with the public test network or the simulation test network. The purpose of this network is primarily for unit tests and RPC server tests. On the other hand, the simulation test network is intended for full integration tests between different applications such as wallets, voting service providers, mining pools, block explorers, and other services that build on Decred.

Since this network is only intended for unit testing, its values are subject to change even if it would cause a hard fork.

func SimNetParams 

func SimNetParams() *Params

SimNetParams returns the network parameters for the simulation test network. This network is similar to the normal test network except it is intended for private use within a group of individuals doing simulation testing and full integration tests between different applications such as wallets, voting service providers, mining pools, block explorers, and other services that build on Decred.

The functionality is intended to differ in that the only nodes which are specifically specified are used to create the network rather than following normal discovery rules. This is important as otherwise it would just turn into another public testnet.

func TestNet3Params 

func TestNet3Params() *Params

TestNet3Params return the network parameters for the test currency network. This network is sometimes simply called "testnet". This is the third public iteration of testnet.

func (*Params) AddrIDPubKeyHashECDSAV0 

func (p *Params) AddrIDPubKeyHashECDSAV0() [2]byte

AddrIDPubKeyHashECDSAV0 returns the magic prefix bytes for version 0 pay-to-pubkey-hash addresses where the underlying pubkey is secp256k1 and the signature algorithm is ECDSA.

func (*Params) AddrIDPubKeyHashEd25519V0 

func (p *Params) AddrIDPubKeyHashEd25519V0() [2]byte

AddrIDPubKeyHashEd25519V0 returns the magic prefix bytes for version 0 pay-to-pubkey-hash addresses where the underlying pubkey and signature algorithm are Ed25519.

func (*Params) AddrIDPubKeyHashSchnorrV0 

func (p *Params) AddrIDPubKeyHashSchnorrV0() [2]byte

AddrIDPubKeyHashSchnorrV0 returns the magic prefix bytes for version 0 pay-to-pubkey-hash addresses where the underlying pubkey is secp256k1 and the signature algorithm is Schnorr.

func (*Params) AddrIDPubKeyV0 

func (p *Params) AddrIDPubKeyV0() [2]byte

AddrIDPubKeyV0 returns the magic prefix bytes for version 0 pay-to-pubkey addresses.

func (*Params) AddrIDScriptHashV0 

func (p *Params) AddrIDScriptHashV0() [2]byte

AddrIDScriptHashV0 returns the magic prefix bytes for version 0 pay-to-script-hash addresses.

func (*Params) BaseSubsidyValue 

func (p *Params) BaseSubsidyValue() int64

BaseSubsidyValue returns the starting base max potential subsidy amount for mined blocks. This value is reduced over time and then split proportionally between PoW, PoS, and the Treasury. The reduction is controlled by the SubsidyReductionInterval, SubsidyReductionMultiplier, and SubsidyReductionDivisor parameters.

func (*Params) BlockOneSubsidy 

func (p *Params) BlockOneSubsidy() int64

BlockOneSubsidy returns the total subsidy of block height 1 for the network.

func (*Params) HDPrivKeyVersion 

func (p *Params) HDPrivKeyVersion() [4]byte

HDPrivKeyVersion returns the hierarchical deterministic extended private key magic version bytes for the network the parameters define.

func (*Params) HDPubKeyVersion 

func (p *Params) HDPubKeyVersion() [4]byte

HDPubKeyVersion returns the hierarchical deterministic extended public key magic version bytes for the network the parameters define.

func (*Params) LatestCheckpointHeight 

func (p *Params) LatestCheckpointHeight() int64

LatestCheckpointHeight is the height of the latest checkpoint block in the parameters.

func (*Params) PiKeyExists 

func (p *Params) PiKeyExists(key []byte) bool

PiKeyExists returns true if the provided key is a sanctioned Pi Key.

func (*Params) Seeders 

func (p *Params) Seeders() []string

Seeders returns the list of HTTP seeders.

func (*Params) StakeEnableHeight 

func (p *Params) StakeEnableHeight() int64

StakeEnableHeight returns the height at which the first ticket could possibly mature.

func (*Params) StakeSubsidyProportion 

func (p *Params) StakeSubsidyProportion() uint16

StakeSubsidyProportion returns the comparative proportion of the subsidy generated for casting stake votes (collectively, per block). See the documentation for WorkSubsidyProportion for more details on how the parameter is used.

func (*Params) StakeValidationBeginHeight 

func (p *Params) StakeValidationBeginHeight() int64

StakeValidationBeginHeight returns the height at which votes become required to extend a block. This height is the first that will be voted on, but will not include any votes itself.

func (*Params) SubsidyReductionDivisor 

func (p *Params) SubsidyReductionDivisor() int64

SubsidyReductionDivisor returns the divisor to use when performing the exponential subsidy reduction.

func (*Params) SubsidyReductionIntervalBlocks 

func (p *Params) SubsidyReductionIntervalBlocks() int64

SubsidyReductionIntervalBlocks returns the reduction interval in number of blocks.

func (*Params) SubsidyReductionMultiplier 

func (p *Params) SubsidyReductionMultiplier() int64

SubsidyReductionMultiplier returns the multiplier to use when performing the exponential subsidy reduction.

func (*Params) TicketExpiryBlocks 

func (p *Params) TicketExpiryBlocks() uint32

TicketExpiryBlocks returns the number of blocks after maturity that tickets expire. This will be >= (StakeEnableHeight() + StakeValidationBeginHeight()).

func (*Params) TotalSubsidyProportions 

func (p *Params) TotalSubsidyProportions() uint16

TotalSubsidyProportions is the sum of WorkReward, StakeReward, and BlockTax proportions.

func (*Params) TreasurySubsidyProportion 

func (p *Params) TreasurySubsidyProportion() uint16

TreasurySubsidyProportion returns the comparative proportion of the subsidy allocated to the project treasury. See the documentation for WorkSubsidyProportion for more details on how the parameter is used.

func (*Params) VotesPerBlock 

func (p *Params) VotesPerBlock() uint16

VotesPerBlock returns the maximum number of votes a block must contain to receive full subsidy.

func (*Params) WorkSubsidyProportion 

func (p *Params) WorkSubsidyProportion() uint16

WorkSubsidyProportion returns the comparative proportion of the subsidy generated for creating a block (PoW).

The proportional split between PoW, PoS, and the Treasury is calculated by treating each of the proportional parameters as a ratio to the sum of the three proportional parameters: WorkSubsidyProportion, StakeSubsidyProportion, and TreasurySubsidyProportion.

For example: WorkSubsidyProportion: 6 => 6 / (6+3+1) => 6/10 => 60% StakeSubsidyProportion: 3 => 3 / (6+3+1) => 3/10 => 30% TreasurySubsidyProportion: 1 => 1 / (6+3+1) => 1/10 => 10%

type TokenPayout 

type TokenPayout struct {
	ScriptVersion uint16
	Script        []byte
	Amount        int64
}

TokenPayout is a payout for block 1 which specifies a required script version, script, and amount to pay in a transaction output.

type Vote 

type Vote struct {
	// Single unique word identifying the vote.
	Id string

	// Longer description of what the vote is about.
	Description string

	// Usable bits for this vote.
	Mask uint16

	Choices []Choice
}

Vote describes a voting instance. It is self-describing so that the UI can be directly implemented using the fields. Mask determines which bits can be used. Bits are enumerated and must be consecutive. Each vote requires one and only one abstain (bits = 0) and reject vote (IsNo = true).

For example, change block height from int64 to uint64. 

Vote {
	Id:          "blockheight",
	Description: "Change block height from int64 to uint64"
	Mask:        0x0006,
	Choices:     []Choice{
		{
			Id:          "abstain",
			Description: "abstain voting for change",
			Bits:        0x0000,
			IsAbstain:   true,
			IsNo:        false,
		},
		{
			Id:          "no",
			Description: "reject changing block height to uint64",
			Bits:        0x0002,
			IsAbstain:   false,
			IsNo:        false,
		},
		{
			Id:          "yes",
			Description: "accept changing block height to uint64",
			Bits:        0x0004,
			IsAbstain:   false,
			IsNo:        true,
		},
	},
}

func (*Vote) VoteIndex 

func (v *Vote) VoteIndex(vote uint16) int

VoteIndex compares vote to Choice.Bits and returns the index into the Choices array. If the vote is invalid it returns -1.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.