consul-alerts

README

consul-alerts

A highly available daemon for sending notifications and reminders based on Consul health checks.

Under the covers, consul-alerts leverages Consul's own leadership election and KV store to provide automatic failover and seamless operation in the case of a consul-alerts node failure and ensures that your notifications are still sent.

consul-alerts provides a high degree of configuration including:

• Several built-in Notifiers for distribution of health check alerts (email, sns, pagerduty, etc.)
• The ability to create Notification Profiles, sets of Notifiers which will respond to the given alert when a configurable threshold is exceeded
• Multiple degrees of customization for Notifiers and Blacklisting of alerts (service, check id or host)

Requirement

1. Consul 0.4+. Get it here.
2. Configured GOPATH.

Releases

Stable release are here.

Latest release are found here:

• darwin-amd64
• FreeBSD-amd64
• linux-386
• linux-amd64

Installation

$ go get github.com/AcalephStorage/consul-alerts
$ go install

This should install consul-alerts to $GOPATH/bin

or pull the image from docker:

$ docker pull acaleph/consul-alerts

Usage

$ consul-alerts start

By default, this runs the daemon and API at localhost:9000 and connects to the local consul agent (localhost:8500) and default datacenter (dc1). These can be overriden by the following flags:

$ consul-alerts start --alert-addr=localhost:9000 --consul-addr=localhost:8500 --consul-dc=dc1 --consul-acl-token=""

Once the daemon is running, it can act as a handler for consul watches. At the moment only checks and events are supported.

$ consul watch -type checks consul-alerts watch checks --alert-addr=localhost:9000
$ consul watch -type event consul-alerts watch event --alert-addr=localhost:9000

or run the watchers on the agent the daemon connects by adding the following flags during consul-alerts run:

$ consul-alerts start --watch-events --watch-checks

Usage - Docker

There are a few options for running in docker.

First option is using the consul agent built into the container. This option requires overriding the default entry point and running an exec to launch consul alerts.

Start consul:

docker run -ti \
  --rm -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  --entrypoint=/bin/consul \
  acaleph/consul-alerts \
  agent -data-dir /data -server -bootstrap -client=0.0.0.0

Then in a separate terminal start consul-alerts:

$ docker exec -ti consul-alerts /bin/consul-alerts start --alert-addr=0.0.0.0:9000 --log-level=info

The second option is to link to an existing consul container through docker networking and --link option. This method can more easily share the consul instance with other containers such as vault.

First launch consul container:

$ docker run \
  -p 8400:8400 \
  -p 8500:8500 \
  -p 8600:53/udp \
  --hostname consul \
  --name consul \
  progrium/consul \
  -server -bootstrap -ui-dir /ui

Then run consul alerts container:

$ docker run -ti \
  -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  --link consul:consul \
  acaleph/consul-alerts start \
  --consul-addr=consul:8500 \
  --log-level=info

Last option is to launch the container and point at a remote consul instance:

$ docker run -ti \
  -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  acaleph/consul-alerts start \
  --consul-addr=remote-consul-server.domain.tdl:8500 \
  --log-level=info

NOTE: Don't change --alert-addr when using the docker container.

Configuration

To assure consistency between instances, configuration is stored in Consul's KV with the prefix: consul-alerts/config/. consul-alerts works out of the box without any customizations by using the defaults documented below and leverages the KV settings as overrides.

A few suggestions on operating and bootstrapping your consul-alerts configuration via the KV store are located in the Operations section below.

Health Checks

Health checking is enabled by default and is at the core what consul-alerts provides. The Health Check functionality is responsible for triggering a notification when the given consul check has changed status. To prevent flapping, notifications are only sent when a check status has been consistent for a specific time in seconds (60 by default).

Configuration Options: The default Health Check configuration can be customized by setting kv with the prefix: consul-alerts/config/checks/

key	description
enabled	Globally enable the Health Check functionality. [Default: true]
change-threshold	The time, in seconds, that a check must be in a given status before an alert is sent [Default: 60]

Notification Profiles

Notification Profiles allow the operator the ability to customize how often and to which Notifiers alerts will be sent via the Interval and NotifList attributes described below.

Profiles are configured as keys with the prefix: consul-alerts/config/notif-profiles/.

Notification Profile Specification

Key: The name of the Notification Profile

Ex. emailer_only would be located at consul-alerts/config/notif-profiles/emailer_only

Value: A JSON object adhering to the schema shown below.

{
  "$schema": "http://json-schema.org/draft-04/schema#",
  "type": "object",
  "title": "Notifier Profile Schema.",
  "description": "Defines a given Notifier Profile's configuration",
  "properties": {
    "Interval": {
      "type": "integer",
      "title": "Reminder Interval.",
      "description": "Defines the Interval (in minutes) which Reminders should be sent to the given Notifiers.  Should be a multiple of 5."
    },
    "NotifList": {
      "type": "object",
      "title": "Hash of Notifiers to configure.",
      "description": "A listing of Notifier names with a boolean value indicating if it should be enabled or not.",
      "patternProperties" : {
        ".{1,}" : { "type" : "string" }
      }
    }
  },
  "required": [
    "Interval",
    "NotifList"
  ]
}

Notification Profile Examples

Notification Profile to only send Emails with reminders every 10 minutes:

Key: consul-alerts/config/notif-profiles/emailer_only

Value:

{
  "Interval": 10,
  "NotifList": {
    "log":false,
    "email":true
  }
}

NOTE: While it is completely valid to explicitly disable a Notifier in a Notifier Profile, it is not necessary. In the event that a Notification Profile is used, only Notifiers which are explicitly defined and enabled will be used. In the example above then, we could have omitted the "log": false in the NotifList and achieved the same results.

Example - Notification Profile to only send to PagerDuty but never send reminders:

Key: consul-alerts/config/notif-profiles/pagerduty_no_reminders

Value:

{
  "Interval": 0,
  "NotifList": {
    "pagerduty":true
  }
}

NOTE: The Interval being set to 0 disables Reminders from being sent for a given alert. If the service stays in a critical status for an extended period, only that first notification will be sent.

Notification Profile Activation

Notification Profile selection is done by setting keys in consul-alerts/config/notif-selection/services/, consul-alerts/config/notif-selection/checks/, or consul-alerts/config/notif-selection/hosts/ with the appropriate service, check, or host name as the key and the desired Notification Profile name as the value.

In addition to the service, check and host specific Notification Profiles, the operator can setup a default Notification Profile by creating a Notification Profile kv consul-alerts/config/notif-profiles/default, which acts as a fallback in the event a specific Notification Profile is not found. If there are no Notification Profiles matching the criteria, consul-alerts will send the notification to the full list of enabled Notifiers and no reminders will be sent.

As consul-alerts attempts to process a given notification, it has a series of lookups it does to associate an event with a given Notification Profile by matching on:

• Service
• Check
• Host
• Default

NOTE: An event will only trigger notification for the FIRST Notification Profile that meets it's criteria.

Reminders resend the notifications at programmable intervals until they are resolved or added to the blacklist. Reminders are processed every five minutes therefore Interval values should be a multiple of five. If the Interval value is 0 or not set then reminders will not be sent.

Enable/Disable Specific Health Checks

There are four ways to enable/disable health check notifications: mark them by node, serviceID, checkID, or mark individually by node/serviceID/checkID. This is done by adding a KV entry in consul-alerts/config/checks/blacklist/.... Removing the entry will re-enable the check notifications.

Disable all notification by node

Add a KV entry with the key consul-alerts/config/checks/blacklist/nodes/{{ nodeName }}. This will disable notifications for the specified nodeName.

Disable all notification by service

Add a KV entry with the key consul-alerts/config/checks/blacklist/services/{{ serviceId }}. This will disable notifications for the specified serviceId.

Disable all notification by healthCheck

Add a KV entry with the key consul-alerts/config/checks/blacklist/checks/{{ checkId }}. This will disable notifications for the specified checkId.

Disable a single health check

Add a KV entry with the key consul-alerts/config/checks/blacklist/single/{{ node }}/{{ serviceId }}/{{ checkId }}. This will disable the specific health check. If the health check is not associated with a service, use the _ as the serviceId.

Events

Event handling is enabled by default. This delegates any consul event received by the agent to the list of handlers configured. To disable event handling, set consul-alerts/config/events/enabled to false.

Handlers can be configured by adding them to consul-alerts/config/events/handlers. This should be a JSON array of string. Each string should point to any executable. The event data should be read from stdin.

Notifiers

There are several built-in notifiers. Only the Log notifier is enabled by default. Details on enabling and configuration these are documented for each Notifier.

Custom Notifiers

It is also possible to add custom notifiers similar to custom event handlers. Custom notifiers can be added as keys with command path string values in consul-alerts/config/notifiers/custom/. The keys will be used as notifier names in the profiles.

Logger

This logs any health check notification to a file. To disable this notifier, set consul-alerts/config/notifiers/log/enabled to false.

The log file is set to /tmp/consul-notifications.log by default. This can be changed by changing consul-alerts/config/notifiers/log/path.

Email

This emails the health notifications. To enable this, set consul-alerts/config/notifiers/email/enabled to true.

The email and smtp details needs to be configured:

prefix: consul-alerts/config/notifiers/email/

key	description
enabled	Enable the email notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
url	The SMTP server url
port	The SMTP server port
username	The SMTP username
password	The SMTP password
sender-alias	The sender alias. [Default: "Consul Alerts"]
sender-email	The sender email
receivers	The emails of the receivers. JSON array of string
template	Path to custom email template. [Default: internal template]
one-per-alert	Whether to send one email per alert [Default: false]
one-per-node	Whether to send one email per node [Default: false] (overriden by one-per-alert)

The template can be any go html template. An EmailData instance will be passed to the template.

InfluxDB

This sends the notifications as series points in influxdb. Set consul-alerts/config/notifiers/influxdb/enabled to true to enabled. InfluxDB details need to be set too.

prefix: consul-alerts/config/notifiers/influxdb/

key	description
enabled	Enable the influxdb notifier. [Default: false]
host	The influxdb host. (eg. localhost:8086)
username	The influxdb username
password	The influxdb password
database	The influxdb database name
series-name	The series name for the points

Slack

Slack integration is also supported. To enable, set consul-alerts/config/notifiers/slack/enabled to true. Slack details needs to be configured.

prefix: consul-alerts/config/notifiers/slack/

key	description
enabled	Enable the Slack notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
url	The incoming-webhook url (mandatory)
channel	The channel to post the notification (mandatory)
username	The username to appear on the post
icon-url	URL of a custom image for the notification
icon-emoji	Emoji (if not using icon-url) for the notification

In order to enable slack integration, you have to create a new Incoming WebHooks. Then use the token created by the previous action.

PagerDuty

To enable PagerDuty built-in notifier, set consul-alerts/config/notifiers/pagerduty/enabled to true. This is disabled by default. Service key and client details also needs to be configured.

prefix: consul-alerts/config/notifiers/pagerduty/

key	description
enabled	Enable the PagerDuty notifier. [Default: false]
service-key	Service key to access PagerDuty
client-name	The monitoring client name
client-url	The monitoring client url

HipChat

To enable HipChat built-in notifier, set consul-alerts/config/notifiers/hipchat/enabled to true. Hipchat details needs to be configured.

prefix: consul-alerts/config/notifiers/hipchat/

key	description
enabled	Enable the HipChat notifier. [Default: false]
from	The name to send notifications as (optional)
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
base-url	HipChat base url [Default: https://api.hipchat.com/v2/]
room-id	The room to post to (mandatory)
auth-token	Authentication token (mandatory)

The auth-token needs to be a room notification token for the room-id being posted to. See HipChat API docs.

The default base-url works for HipChat-hosted rooms. You only need to override it if you are running your own server.

OpsGenie

To enable OpsGenie built-in notifier, set consul-alerts/config/notifiers/opsgenie/enabled to true. OpsGenie details needs to be configured.

prefix: consul-alerts/config/notifiers/opsgenie/

key	description
enabled	Enable the OpsGenie notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
api-key	API Key (mandatory)

Amazon Web Services Simple Notification Service ("SNS")

To enable AWS SNS built-in notifier, set consul-alerts/config/notifiers/awssns/enabled to true. AWS SNS details needs to be configured.

prefix: consul-alerts/config/notifiers/awssns/

key	description
enabled	Enable the AWS SNS notifier. [Default: false]
region	AWS Region (mandatory)
topic-arn	Topic ARN to publish to. (mandatory)

VictorOps

To enable the VictorOps built-in notifier, set consul-alerts/config/notifiers/victorops/enabled to true. VictorOps details needs to be configured.

prefix: consul-alerts/config/notifiers/victorops/

key	description
enabled	Enable the VictorOps notifier. [Default: false]
api-key	API Key (mandatory)
routing-key	Routing Key (mandatory)

Health Check via API

Health status can also be queried via the API. This can be used for compatibility with nagios, sensu, or other monitoring tools. To get the status of a specific check, use the following entrypoint.

http://consul-alerts:9000/v1/health?node=<node>&service=<serviceId>&check=<checkId>

This will return the output of the check and the following HTTP codes:

Status	Code
passing	200
warning	503
critical	503
unknown	404

http://consul-alerts:9000/v1/health/wildcard?node=<node>&service=<serviceId>&check=<checkId>&status=<status>&alwaysOk=true&ignoreBlacklist=true v1/health/wildcard is similar to v1/health but returns all matched checks (omitted service/node/check params assumed as any) . Values returned in JSON form, status code 503 if one of services in critical state.

Additional params are ignoreBlacklist and alwaysOk which forces status code to 200 regardless of checks status.

Operations

Configuration may be set manually through consul UI or API, using configuration management tools such as chef, puppet or Ansible, or backed up and restored using consulate.

Consulate Example:

consulate kv backup consul-alerts/config -f consul-alerts-config.json
consulate kv restore consul-alerts/config -f consul-alerts-config.json --prune

Contribution

PRs are more than welcome. Just fork, create a feature branch, and open a PR. We love PRs. :)

TODO

Needs better doc and some cleanup too. :)

Documentation

Overview

Consul Alerts is a tool to send alerts when checks changes status. It is built on top of consul KV, Health, and watch features.