tokenring_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module for IEEE Token Ring entities.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Dot5ChipSetIBM16 

type Dot5ChipSetIBM16 struct {
}

func (Dot5ChipSetIBM16) String 

func (id Dot5ChipSetIBM16) String() string

type Dot5ChipSetTItms380 

type Dot5ChipSetTItms380 struct {
}

func (Dot5ChipSetTItms380) String 

func (id Dot5ChipSetTItms380) String() string

type Dot5ChipSetTItms380c16 

type Dot5ChipSetTItms380c16 struct {
}

func (Dot5ChipSetTItms380c16) String 

func (id Dot5ChipSetTItms380c16) String() string

type Dot5TestFullDuplexLoopBack 

type Dot5TestFullDuplexLoopBack struct {
}

func (Dot5TestFullDuplexLoopBack) String 

func (id Dot5TestFullDuplexLoopBack) String() string

type Dot5TestInsertFunc 

type Dot5TestInsertFunc struct {
}

func (Dot5TestInsertFunc) String 

func (id Dot5TestInsertFunc) String() string

type TOKENRINGMIB 

type TOKENRINGMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This table contains Token Ring interface parameters and state variables,
	// one entry per 802.5 interface.
	Dot5Table TOKENRINGMIB_Dot5Table

	// A table containing Token Ring statistics, one entry per 802.5 interface.
	// All the statistics are defined using the syntax Counter32 as 32-bit wrap
	// around counters.  Thus, if an interface's hardware maintains these
	// statistics in 16-bit counters, then the agent must read the hardware's
	// counters frequently enough to prevent loss of significance, in order to
	// maintain 32-bit counters in software.
	Dot5StatsTable TOKENRINGMIB_Dot5StatsTable

	// This table contains Token Ring interface timer values, one entry per 802.5
	// interface.
	Dot5TimerTable TOKENRINGMIB_Dot5TimerTable
}

TOKENRINGMIB

func (*TOKENRINGMIB) GetEntityData 

func (tOKENRINGMIB *TOKENRINGMIB) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5StatsTable 

type TOKENRINGMIB_Dot5StatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry contains the 802.5 statistics for a particular interface. The type
	// is slice of TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry.
	Dot5StatsEntry []*TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry
}

TOKENRINGMIB_Dot5StatsTable A table containing Token Ring statistics, one entry per 802.5 interface. 

All the statistics are defined using

the syntax Counter32 as 32-bit wrap around counters. Thus, if an interface's hardware maintains these statistics in 16-bit counters, then the agent must read the hardware's counters frequently enough to prevent loss of significance, in order to maintain 32-bit counters in software.

func (*TOKENRINGMIB_Dot5StatsTable) GetEntityData 

func (dot5StatsTable *TOKENRINGMIB_Dot5StatsTable) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry 

type TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of this object identifies the 802.5
	// interface for which this entry contains management information.  The value
	// of this object for a particular interface has the same value as MIB-II's
	// ifIndex object for the same interface. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5StatsIfIndex interface{}

	// This counter is incremented when a frame or token is copied or repeated by
	// a station, the E bit is zero in the frame or token and one of the following
	// conditions exists: 1) there is a non-data bit (J or K bit) between the SD
	// and the ED of the frame or token, or 2) there is an FCS error in the frame.
	// The type is interface{} with range: 0..4294967295.
	Dot5StatsLineErrors interface{}

	// This counter is incremented when a station detects the absence of
	// transitions for five half-bit timers (burst-five error). The type is
	// interface{} with range: 0..4294967295.
	Dot5StatsBurstErrors interface{}

	// This counter is incremented when a station receives an AMP or SMP frame in
	// which A is equal to C is equal to 0, and then receives another SMP frame
	// with A is equal to C is equal to 0 without first receiving an AMP frame. It
	// denotes a station that cannot set the AC bits properly. The type is
	// interface{} with range: 0..4294967295.
	Dot5StatsACErrors interface{}

	// This counter is incremented when a station transmits an abort delimiter
	// while transmitting. The type is interface{} with range: 0..4294967295.
	Dot5StatsAbortTransErrors interface{}

	// This counter is incremented when a station recognizes an internal error.
	// The type is interface{} with range: 0..4294967295.
	Dot5StatsInternalErrors interface{}

	// This counter is incremented when a station is transmitting and its TRR
	// timer expires. This condition denotes a condition where a transmitting
	// station in strip mode does not receive the trailer of the frame before the
	// TRR timer goes off. The type is interface{} with range: 0..4294967295.
	Dot5StatsLostFrameErrors interface{}

	// This counter is incremented when a station recognizes a frame addressed to
	// its specific address, but has no available buffer space indicating that the
	// station is congested. The type is interface{} with range: 0..4294967295.
	Dot5StatsReceiveCongestions interface{}

	// This counter is incremented when a station recognizes a frame addressed to
	// its specific address and detects that the FS field A bits are set to 1
	// indicating a possible line hit or duplicate address. The type is
	// interface{} with range: 0..4294967295.
	Dot5StatsFrameCopiedErrors interface{}

	// This counter is incremented when a station acting as the active monitor
	// recognizes an error condition that needs a token transmitted. The type is
	// interface{} with range: 0..4294967295.
	Dot5StatsTokenErrors interface{}

	// The number of Soft Errors the interface has detected. It directly
	// corresponds to the number of Report Error MAC frames that this interface
	// has transmitted. Soft Errors are those which are recoverable by the MAC
	// layer protocols. The type is interface{} with range: 0..4294967295.
	Dot5StatsSoftErrors interface{}

	// The number of times this interface has detected an immediately recoverable
	// fatal error.  It denotes the number of times this interface is either
	// transmitting or receiving beacon MAC frames. The type is interface{} with
	// range: 0..4294967295.
	Dot5StatsHardErrors interface{}

	// The number of times this interface has detected the loss of signal
	// condition from the ring. The type is interface{} with range: 0..4294967295.
	Dot5StatsSignalLoss interface{}

	// The number of times this interface has transmitted a beacon frame. The type
	// is interface{} with range: 0..4294967295.
	Dot5StatsTransmitBeacons interface{}

	// The number of Claim Token MAC frames received or transmitted after the
	// interface has received a Ring Purge MAC frame.  This counter signifies the
	// number of times the ring has been purged and is being recovered back into a
	// normal operating state. The type is interface{} with range: 0..4294967295.
	Dot5StatsRecoverys interface{}

	// The number of times the interface has detected an open or short circuit in
	// the lobe data path.  The adapter will be closed and dot5RingState will
	// signify this condition. The type is interface{} with range: 0..4294967295.
	Dot5StatsLobeWires interface{}

	// The number of times the interface has received a Remove Ring Station MAC
	// frame request.  When this frame is received the interface will enter the
	// close state and dot5RingState will signify this condition. The type is
	// interface{} with range: 0..4294967295.
	Dot5StatsRemoves interface{}

	// The number of times the interface has sensed that it is the only station on
	// the ring.  This will happen if the interface is the first one up on a ring,
	// or if there is a hardware problem. The type is interface{} with range:
	// 0..4294967295.
	Dot5StatsSingles interface{}

	// The number of times the interface has detected that the frequency of the
	// incoming signal differs from the expected frequency by more than that
	// specified by the IEEE 802.5 standard. The type is interface{} with range:
	// 0..4294967295.
	Dot5StatsFreqErrors interface{}
}

TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry An entry contains the 802.5 statistics for a particular interface.

func (*TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry) GetEntityData 

func (dot5StatsEntry *TOKENRINGMIB_Dot5StatsTable_Dot5StatsEntry) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5Table 

type TOKENRINGMIB_Dot5Table struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of Token Ring status and parameter values for an 802.5 interface.
	// The type is slice of TOKENRINGMIB_Dot5Table_Dot5Entry.
	Dot5Entry []*TOKENRINGMIB_Dot5Table_Dot5Entry
}

TOKENRINGMIB_Dot5Table This table contains Token Ring interface parameters and state variables, one entry per 802.5 interface.

func (*TOKENRINGMIB_Dot5Table) GetEntityData 

func (dot5Table *TOKENRINGMIB_Dot5Table) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5Table_Dot5Entry 

type TOKENRINGMIB_Dot5Table_Dot5Entry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of this object identifies the 802.5
	// interface for which this entry contains management information.  The value
	// of this object for a particular interface has the same value as the ifIndex
	// object, defined in MIB-II for the same interface. The type is interface{}
	// with range: -2147483648..2147483647.
	Dot5IfIndex interface{}

	// When this object is set to the value of open(2), the station should go into
	// the open state.  The progress and success of the open is given by the
	// values of the objects dot5RingState and dot5RingOpenStatus.     When this
	// object is set to the value of reset(3), then the station should do a reset.
	// On a reset, all MIB counters should retain their values, if possible. Other
	// side affects are dependent on the hardware chip set.     When this object
	// is set to the value of close(4), the station should go into the stopped
	// state by removing itself from the ring.     Setting this object to a value
	// of noop(1) has no effect.     When read, this object always has a value of
	// noop(1).     The open(2) and close(4) values correspond to the up(1) and
	// down(2) values of MIB-II's ifAdminStatus and ifOperStatus, i.e., the
	// setting of ifAdminStatus and   dot5Commands affects the values of both
	// dot5Commands and ifOperStatus. The type is Dot5Commands.
	Dot5Commands interface{}

	// The current interface status which can be used to diagnose fluctuating
	// problems that can occur on token rings, after a station has successfully
	// been added to the ring.    Before an open is completed, this object has the
	// value for the 'no status' condition.  The dot5RingState and
	// dot5RingOpenStatus objects provide for debugging problems when the station
	// can not even enter the ring.     The object's value is a sum of values, one
	// for each currently applicable condition.  The following values are defined
	// for various conditions:          0 = No Problems detected        32 = Ring
	// Recovery        64 = Single Station       256 = Remove Received       512 =
	// reserved      1024 = Auto-Removal Error      2048 = Lobe Wire Fault
	// 4096 = Transmit Beacon      8192 = Soft Error     16384 = Hard Error
	// 32768 = Signal Loss    131072 = no status, open not completed. The type is
	// interface{} with range: 0..262143.
	Dot5RingStatus interface{}

	// The current interface state with respect to entering or leaving the ring.
	// The type is Dot5RingState.
	Dot5RingState interface{}

	// This object indicates the success, or the reason for failure, of the
	// station's most recent attempt to enter the ring. The type is
	// Dot5RingOpenStatus.
	Dot5RingOpenStatus interface{}

	// The ring-speed at the next insertion into the ring.  Note that this may or
	// may not be different to the current ring-speed which is given by MIB-II's
	// ifSpeed.  For interfaces which do not support changing ring-speed,
	// dot5RingSpeed can only be set to its current value.  When dot5RingSpeed has
	// the value unknown(1), the ring's actual ring-speed is to be used. The type
	// is Dot5RingSpeed.
	Dot5RingSpeed interface{}

	// The MAC-address of the up stream neighbor station in the ring. The type is
	// string with pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot5UpStream interface{}

	// If this object has a value of true(1) then this interface will participate
	// in the active monitor selection process.  If the value is false(2) then it
	// will not. Setting this object does not take effect until the next Active
	// Monitor election, and might not take effect until the next time the
	// interface is opened. The type is Dot5ActMonParticipate.
	Dot5ActMonParticipate interface{}

	// The bit mask of all Token Ring functional addresses for which this
	// interface will accept frames. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot5Functional interface{}

	// The value of MIB-II's sysUpTime object at which the local system last
	// transmitted a Beacon frame on this interface. The type is interface{} with
	// range: 0..4294967295.
	Dot5LastBeaconSent interface{}
}

TOKENRINGMIB_Dot5Table_Dot5Entry A list of Token Ring status and parameter values for an 802.5 interface.

func (*TOKENRINGMIB_Dot5Table_Dot5Entry) GetEntityData 

func (dot5Entry *TOKENRINGMIB_Dot5Table_Dot5Entry) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate 

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate string

TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate represents the interface is opened. 

const (
	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate_true_ TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate = "true"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate_false_ TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5ActMonParticipate = "false"
)

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands 

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands string

TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands represents dot5Commands and ifOperStatus. 

const (
	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands_noop TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands = "noop"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands_open TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands = "open"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands_reset TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands = "reset"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands_close_ TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5Commands = "close"
)

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus 

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus string

TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus represents recent attempt to enter the ring. 

const (
	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_noOpen TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "noOpen"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_badParam TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "badParam"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_lobeFailed TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "lobeFailed"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_signalLoss TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "signalLoss"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_insertionTimeout TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "insertionTimeout"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_ringFailed TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "ringFailed"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_beaconing TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "beaconing"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_duplicateMAC TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "duplicateMAC"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_requestFailed TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "requestFailed"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_removeReceived TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "removeReceived"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus_open TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingOpenStatus = "open"
)

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed 

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed string

TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed represents to be used. 

const (
	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed_unknown TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed = "unknown"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed_oneMegabit TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed = "oneMegabit"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed_fourMegabit TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed = "fourMegabit"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed_sixteenMegabit TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingSpeed = "sixteenMegabit"
)

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState 

type TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState string

TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState represents to entering or leaving the ring. 

const (
	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_opened TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "opened"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_closed TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "closed"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_opening TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "opening"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_closing TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "closing"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_openFailure TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "openFailure"

	TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState_ringFailure TOKENRINGMIB_Dot5Table_Dot5Entry_Dot5RingState = "ringFailure"
)

type TOKENRINGMIB_Dot5TimerTable 

type TOKENRINGMIB_Dot5TimerTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of Token Ring timer values for an 802.5 interface. The type is slice
	// of TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry.
	Dot5TimerEntry []*TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry
}

TOKENRINGMIB_Dot5TimerTable This table contains Token Ring interface timer values, one entry per 802.5 interface.

func (*TOKENRINGMIB_Dot5TimerTable) GetEntityData 

func (dot5TimerTable *TOKENRINGMIB_Dot5TimerTable) GetEntityData() *types.CommonEntityData

type TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry 

type TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of this object identifies the 802.5
	// interface for which this entry contains timer values.  The value of   this
	// object for a particular interface has the same value as MIB-II's ifIndex
	// object for the same interface. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5TimerIfIndex interface{}

	// The time-out value used to ensure the interface will return to Repeat
	// State, in units of 100 micro-seconds.  The value should be greater than the
	// maximum ring latency. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5TimerReturnRepeat interface{}

	// Maximum period of time a station is permitted to transmit frames after
	// capturing a token, in units of 100 micro-seconds. The type is interface{}
	// with range: -2147483648..2147483647.
	Dot5TimerHolding interface{}

	// The time-out value for enqueuing of an SMP PDU after reception of an AMP or
	// SMP frame in which the A and C bits were equal to 0, in units of 100
	// micro-seconds. The type is interface{} with range: -2147483648..2147483647.
	Dot5TimerQueuePDU interface{}

	// The time-out value used by the active monitor to detect the absence of
	// valid transmissions, in units of 100 micro-seconds. The type is interface{}
	// with range: -2147483648..2147483647.
	Dot5TimerValidTransmit interface{}

	// The time-out value used to recover from various-related error situations.
	// If N is the maximum number of stations on the ring, the value of this timer
	// is normally: dot5TimerReturnRepeat + N*dot5TimerHolding. The type is
	// interface{} with range: -2147483648..2147483647.
	Dot5TimerNoToken interface{}

	// The time-out value used by the active monitor to stimulate the enqueuing of
	// an AMP PDU for transmission, in units of 100 micro-seconds. The type is
	// interface{} with range: -2147483648..2147483647.
	Dot5TimerActiveMon interface{}

	// The time-out value used by the stand-by monitors to ensure that there is an
	// active monitor on the ring and to detect a continuous stream of tokens, in
	// units of 100 micro-seconds. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5TimerStandbyMon interface{}

	// The time-out value which determines how often a station shall send a Report
	// Error MAC frame to report its error counters, in units of 100
	// micro-seconds. The type is interface{} with range: -2147483648..2147483647.
	Dot5TimerErrorReport interface{}

	// The time-out value which determines how long a station shall remain in the
	// state of transmitting Beacon frames before entering the Bypass state, in
	// units of 100 micro-seconds. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5TimerBeaconTransmit interface{}

	// The time-out value which determines how long a station shall receive Beacon
	// frames from its downstream neighbor before entering the Bypass state, in
	// units of 100 micro-seconds. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot5TimerBeaconReceive interface{}
}

TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry A list of Token Ring timer values for an 802.5 interface.

func (*TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry) GetEntityData 

func (dot5TimerEntry *TOKENRINGMIB_Dot5TimerTable_Dot5TimerEntry) GetEntityData() *types.CommonEntityData

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.