etherlike_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module to describe generic objects for ethernet-like network interfaces.

The following reference is used throughout this MIB module:

[IEEE 802.3 Std] refers to:

IEEE Std 802.3, 2002 Edition: 'IEEE Standard
for Information technology -
Telecommunications and information exchange
between systems - Local and metropolitan
area networks - Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications', as
amended by IEEE Std 802.3ae-2002:
'Amendment: Media Access Control (MAC)
Parameters, Physical Layer, and Management
Parameters for 10 Gb/s Operation', August,
2002.

Of particular interest is Clause 30, '10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'.

Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3635; see the RFC itself for full legal notices.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Dot3ErrorInitError

type Dot3ErrorInitError struct {
}

func (Dot3ErrorInitError) String

func (id Dot3ErrorInitError) String() string

type Dot3ErrorLoopbackError

type Dot3ErrorLoopbackError struct {
}

func (Dot3ErrorLoopbackError) String

func (id Dot3ErrorLoopbackError) String() string

type Dot3TestLoopBack

type Dot3TestLoopBack struct {
}

func (Dot3TestLoopBack) String

func (id Dot3TestLoopBack) String() string

type Dot3TestTdr

type Dot3TestTdr struct {
}

func (Dot3TestTdr) String

func (id Dot3TestTdr) String() string

type EtherLikeMIB

type EtherLikeMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Statistics for a collection of ethernet-like interfaces attached to a
	// particular system. There will be one row in this table for each
	// ethernet-like interface in the system.
	Dot3StatsTable EtherLikeMIB_Dot3StatsTable

	// A collection of collision histograms for a particular set of interfaces.
	Dot3CollTable EtherLikeMIB_Dot3CollTable

	// A table of descriptive and status information about the MAC Control
	// sublayer on the ethernet-like interfaces attached to a particular system.
	// There will be one row in this table for each ethernet-like interface in the
	// system which implements the MAC Control sublayer.  If some, but not all, of
	// the ethernet-like interfaces in the system implement the MAC Control
	// sublayer, there will be fewer rows in this table than in the
	// dot3StatsTable.
	Dot3ControlTable EtherLikeMIB_Dot3ControlTable

	// A table of descriptive and status information about the MAC Control PAUSE
	// function on the ethernet-like interfaces attached to a particular system.
	// There will be one row in this table for each ethernet-like interface in the
	// system which supports the MAC Control PAUSE function (i.e., the 'pause' bit
	// in the corresponding instance of dot3ControlFunctionsSupported is set).  If
	// some, but not all, of the ethernet-like interfaces in the system implement
	// the MAC Control PAUSE function (for example, if some interfaces only
	// support half-duplex), there will be fewer rows in this table than in the
	// dot3StatsTable.
	Dot3PauseTable EtherLikeMIB_Dot3PauseTable

	// A table containing 64-bit versions of error counters from the
	// dot3StatsTable.  The 32-bit versions of these counters may roll over quite
	// quickly on higher speed ethernet interfaces. The counters that have 64-bit
	// versions in this table are the counters that apply to full-duplex
	// interfaces, since 10 Gb/s and faster ethernet-like interfaces do not
	// support half-duplex, and very few 1000 Mb/s ethernet-like interfaces
	// support half-duplex.  Entries in this table are recommended for interfaces
	// capable of operating at 1000 Mb/s or faster, and are required for
	// interfaces capable of operating at 10 Gb/s or faster.  Lower speed
	// ethernet-like interfaces do not need entries in this table, in which case
	// there may be fewer entries in this table than in the dot3StatsTable.
	// However, implementations containing interfaces with a mix of speeds may
	// choose to implement entries in this table for all ethernet-like interfaces.
	Dot3HCStatsTable EtherLikeMIB_Dot3HCStatsTable
}

EtherLikeMIB

func (*EtherLikeMIB) GetEntityData

func (etherLikeMIB *EtherLikeMIB) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3CollTable

type EtherLikeMIB_Dot3CollTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A cell in the histogram of per-frame collisions for a particular interface.
	// An instance of this object represents the frequency of individual MAC
	// frames for which the transmission (successful or otherwise) on a particular
	// interface is accompanied by a particular number of media collisions. The
	// type is slice of EtherLikeMIB_Dot3CollTable_Dot3CollEntry.
	Dot3CollEntry []*EtherLikeMIB_Dot3CollTable_Dot3CollEntry
}

EtherLikeMIB_Dot3CollTable A collection of collision histograms for a particular set of interfaces.

func (*EtherLikeMIB_Dot3CollTable) GetEntityData

func (dot3CollTable *EtherLikeMIB_Dot3CollTable) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3CollTable_Dot3CollEntry

type EtherLikeMIB_Dot3CollTable_Dot3CollEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to if_mib.IFMIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// This attribute is a key. The number of per-frame media collisions for which
	// a particular collision histogram cell represents the frequency on a
	// particular interface. The type is interface{} with range: 1..16.
	Dot3CollCount interface{}

	// A count of individual MAC frames for which the transmission (successful or
	// otherwise) on a particular interface occurs after the frame has experienced
	// exactly the number of collisions in the associated dot3CollCount object.
	// For example, a frame which is transmitted on interface 77 after
	// experiencing exactly 4 collisions would be indicated by incrementing only
	// dot3CollFrequencies.77.4. No other instance of dot3CollFrequencies would be
	// incremented in this example.  This counter does not increment when the
	// interface is operating in full-duplex mode.  Discontinuities in the value
	// of this counter can occur at re-initialization of the management system,
	// and at other times as indicated by the value of ifCounterDiscontinuityTime.
	// The type is interface{} with range: 0..4294967295.
	Dot3CollFrequencies interface{}
}

EtherLikeMIB_Dot3CollTable_Dot3CollEntry A cell in the histogram of per-frame collisions for a particular interface. An instance of this object represents the frequency of individual MAC frames for which the transmission (successful or otherwise) on a particular interface is accompanied by a particular number of media collisions.

func (*EtherLikeMIB_Dot3CollTable_Dot3CollEntry) GetEntityData

func (dot3CollEntry *EtherLikeMIB_Dot3CollTable_Dot3CollEntry) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3ControlTable

type EtherLikeMIB_Dot3ControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table, containing information about the MAC Control
	// sublayer on a single ethernet-like interface. The type is slice of
	// EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry.
	Dot3ControlEntry []*EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry
}

EtherLikeMIB_Dot3ControlTable A table of descriptive and status information about the MAC Control sublayer on the ethernet-like interfaces attached to a particular system. There will be one row in this table for each ethernet-like interface in the system which implements the MAC Control sublayer. If some, but not all, of the ethernet-like interfaces in the system implement the MAC Control sublayer, there will be fewer rows in this table than in the dot3StatsTable.

func (*EtherLikeMIB_Dot3ControlTable) GetEntityData

func (dot3ControlTable *EtherLikeMIB_Dot3ControlTable) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry

type EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// etherlike_mib.EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsIndex
	Dot3StatsIndex interface{}

	// A list of the possible MAC Control functions implemented for this
	// interface. The type is map[string]bool.
	Dot3ControlFunctionsSupported interface{}

	// A count of MAC Control frames received on this interface that contain an
	// opcode that is not supported by this device.  For interfaces operating at
	// 10 Gb/s, this counter can roll over in less than 5 minutes if it is
	// incrementing at its maximum rate.  Since that amount of time could be less
	// than a management station's poll cycle time, in order to avoid a loss of
	// information, a management station is advised to poll the
	// dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3ControlInUnknownOpcodes interface{}

	// A count of MAC Control frames received on this interface that contain an
	// opcode that is not supported by this device.  This counter is a 64 bit
	// version of dot3ControlInUnknownOpcodes.  It should be used on interfaces
	// operating at 10 Gb/s or faster.  Discontinuities in the value of this
	// counter can occur at re-initialization of the management system, and at
	// other times as indicated by the value of ifCounterDiscontinuityTime. The
	// type is interface{} with range: 0..18446744073709551615.
	Dot3HCControlInUnknownOpcodes interface{}
}

EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry An entry in the table, containing information about the MAC Control sublayer on a single ethernet-like interface.

func (*EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry) GetEntityData

func (dot3ControlEntry *EtherLikeMIB_Dot3ControlTable_Dot3ControlEntry) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3HCStatsTable

type EtherLikeMIB_Dot3HCStatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry containing 64-bit statistics for a single ethernet-like interface.
	// The type is slice of EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry.
	Dot3HCStatsEntry []*EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry
}

EtherLikeMIB_Dot3HCStatsTable A table containing 64-bit versions of error counters from the dot3StatsTable. The 32-bit versions of these counters may roll over quite quickly on higher speed ethernet interfaces. The counters that have 64-bit versions in this table are the counters that apply to full-duplex interfaces, since 10 Gb/s and faster ethernet-like interfaces do not support half-duplex, and very few 1000 Mb/s ethernet-like interfaces support half-duplex.

Entries in this table are recommended for interfaces capable of operating at 1000 Mb/s or faster, and are required for interfaces capable of operating at 10 Gb/s or faster. Lower speed ethernet-like interfaces do not need entries in this table, in which case there may be fewer entries in this table than in the dot3StatsTable. However, implementations containing interfaces with a mix of speeds may choose to implement entries in this table for all ethernet-like interfaces.

func (*EtherLikeMIB_Dot3HCStatsTable) GetEntityData

func (dot3HCStatsTable *EtherLikeMIB_Dot3HCStatsTable) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry

type EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// etherlike_mib.EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsIndex
	Dot3StatsIndex interface{}

	// A count of frames received on a particular interface that are not an
	// integral number of octets in length and do not pass the FCS check.  The
	// count represented by an instance of this object is incremented when the
	// alignmentError status is returned by the MAC service to the LLC (or other
	// MAC user). Received frames for which multiple error conditions pertain are,
	// according to the conventions of IEEE 802.3 Layer Management, counted
	// exclusively according to the error status presented to the LLC.  This
	// counter does not increment for group encoding schemes greater than 4 bits
	// per group.  This counter is a 64 bit version of dot3StatsAlignmentErrors.
	// It should be used on interfaces operating at 10 Gb/s or faster.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615.
	Dot3HCStatsAlignmentErrors interface{}

	// A count of frames received on a particular interface that are an integral
	// number of octets in length but do not pass the FCS check.  This count does
	// not include frames received with frame-too-long or frame-too-short error.
	// The count represented by an instance of this object is incremented when the
	// frameCheckError status is returned by the MAC service to the LLC (or other
	// MAC user). Received frames for which multiple error conditions pertain are,
	// according to the conventions of IEEE 802.3 Layer Management, counted
	// exclusively according to the error status presented to the LLC.  Note:
	// Coding errors detected by the physical layer for speeds above 10 Mb/s will
	// cause the frame to fail the FCS check.  This counter is a 64 bit version of
	// dot3StatsFCSErrors.  It should be used on interfaces operating at 10 Gb/s
	// or faster.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..18446744073709551615.
	Dot3HCStatsFCSErrors interface{}

	// A count of frames for which transmission on a particular interface fails
	// due to an internal MAC sublayer transmit error. A frame is only counted by
	// an instance of this object if it is not counted by the corresponding
	// instance of either the dot3StatsLateCollisions object, the
	// dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors
	// object.  The precise meaning of the count represented by an instance of
	// this object is implementation- specific.  In particular, an instance of
	// this object may represent a count of transmission errors on a particular
	// interface that are not otherwise counted.  This counter is a 64 bit version
	// of dot3StatsInternalMacTransmitErrors.  It should be used on interfaces
	// operating at 10 Gb/s or faster.  Discontinuities in the value of this
	// counter can occur at re-initialization of the management system, and at
	// other times as indicated by the value of ifCounterDiscontinuityTime. The
	// type is interface{} with range: 0..18446744073709551615.
	Dot3HCStatsInternalMacTransmitErrors interface{}

	// A count of frames received on a particular interface that exceed the
	// maximum permitted frame size.  The count represented by an instance of this
	// object is incremented when the frameTooLong status is returned by the MAC
	// service to the LLC (or other MAC user). Received frames for which multiple
	// error conditions pertain are, according to the conventions of IEEE 802.3
	// Layer Management, counted exclusively according to the error status
	// presented to the LLC.  This counter is a 64 bit version of
	// dot3StatsFrameTooLongs.  It should be used on interfaces operating at 10
	// Gb/s or faster.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..18446744073709551615.
	Dot3HCStatsFrameTooLongs interface{}

	// A count of frames for which reception on a particular interface fails due
	// to an internal MAC sublayer receive error. A frame is only counted by an
	// instance of this object if it is not counted by the corresponding instance
	// of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors
	// object, or the dot3StatsFCSErrors object.  The precise meaning of the count
	// represented by an instance of this object is implementation- specific.  In
	// particular, an instance of this object may represent a count of receive
	// errors on a particular interface that are not otherwise counted.  This
	// counter is a 64 bit version of dot3StatsInternalMacReceiveErrors.  It
	// should be used on interfaces operating at 10 Gb/s or faster.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615.
	Dot3HCStatsInternalMacReceiveErrors interface{}

	// For an interface operating at 100 Mb/s, the number of times there was an
	// invalid data symbol when a valid carrier was present.  For an interface
	// operating in half-duplex mode at 1000 Mb/s, the number of times the
	// receiving media is non-idle (a carrier event) for a period of time equal to
	// or greater than slotTime, and during which there was at least one
	// occurrence of an event that causes the PHY to indicate 'Data reception
	// error' or 'carrier extend error' on the GMII.  For an interface operating
	// in full-duplex mode at 1000 Mb/s, the number of times the receiving media
	// is non-idle (a carrier event) for a period of time equal to or greater than
	// minFrameSize, and during which there was at least one occurrence of an
	// event that causes the PHY to indicate 'Data reception error' on the GMII.
	// For an interface operating at 10 Gb/s, the number of times the receiving
	// media is non-idle (a carrier event) for a period of time equal to or
	// greater than minFrameSize, and during which there was at least one
	// occurrence of an event that causes the PHY to indicate 'Receive Error' on
	// the XGMII.  The count represented by an instance of this object is
	// incremented at most once per carrier event, even if multiple symbol errors
	// occur during the carrier event.  This count does not increment if a
	// collision is present.  This counter is a 64 bit version of
	// dot3StatsSymbolErrors.  It should be used on interfaces operating at 10
	// Gb/s or faster.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..18446744073709551615.
	Dot3HCStatsSymbolErrors interface{}
}

EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry An entry containing 64-bit statistics for a single ethernet-like interface.

func (*EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry) GetEntityData

func (dot3HCStatsEntry *EtherLikeMIB_Dot3HCStatsTable_Dot3HCStatsEntry) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3PauseTable

type EtherLikeMIB_Dot3PauseTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table, containing information about the MAC Control PAUSE
	// function on a single ethernet-like interface. The type is slice of
	// EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry.
	Dot3PauseEntry []*EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry
}

EtherLikeMIB_Dot3PauseTable A table of descriptive and status information about the MAC Control PAUSE function on the ethernet-like interfaces attached to a particular system. There will be one row in this table for each ethernet-like interface in the system which supports the MAC Control PAUSE function (i.e., the 'pause' bit in the corresponding instance of dot3ControlFunctionsSupported is set). If some, but not all, of the ethernet-like interfaces in the system implement the MAC Control PAUSE function (for example, if some interfaces only support half-duplex), there will be fewer rows in this table than in the dot3StatsTable.

func (*EtherLikeMIB_Dot3PauseTable) GetEntityData

func (dot3PauseTable *EtherLikeMIB_Dot3PauseTable) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// etherlike_mib.EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsIndex
	Dot3StatsIndex interface{}

	// This object is used to configure the default administrative PAUSE mode for
	// this interface.  This object represents the administratively-configured
	// PAUSE mode for this interface.  If auto-negotiation is not enabled or is
	// not implemented for the active MAU attached to this interface, the value of
	// this object determines the operational PAUSE mode of the interface whenever
	// it is operating in full-duplex mode.  In this case, a set to this object
	// will force the interface into the specified mode.  If auto-negotiation is
	// implemented and enabled for the MAU attached to this interface, the PAUSE
	// mode for this interface is determined by auto-negotiation, and the value of
	// this object denotes the mode to which the interface will automatically
	// revert if/when auto-negotiation is later disabled.  Note that when
	// auto-negotiation is running, administrative control of the PAUSE mode may
	// be accomplished using the ifMauAutoNegCapAdvertisedBits object in the
	// MAU-MIB.  Note that the value of this object is ignored when the interface
	// is not operating in full-duplex mode.  An attempt to set this object to
	// 'enabledXmit(2)' or 'enabledRcv(3)' will fail on interfaces that do not
	// support operation at greater than 100 Mb/s. The type is Dot3PauseAdminMode.
	Dot3PauseAdminMode interface{}

	// This object reflects the PAUSE mode currently in use on this interface, as
	// determined by either (1) the result of the auto-negotiation function or (2)
	// if auto-negotiation is not enabled or is not implemented for the active MAU
	// attached to this interface, by the value of dot3PauseAdminMode.  Interfaces
	// operating at 100 Mb/s or less will never return 'enabledXmit(2)' or
	// 'enabledRcv(3)'.  Interfaces operating in half-duplex mode will always
	// return 'disabled(1)'.  Interfaces on which auto-negotiation is enabled but
	// not yet completed should return the value 'disabled(1)'. The type is
	// Dot3PauseOperMode.
	Dot3PauseOperMode interface{}

	// A count of MAC Control frames received on this interface with an opcode
	// indicating the PAUSE operation.  This counter does not increment when the
	// interface is operating in half-duplex mode.  For interfaces operating at 10
	// Gb/s, this counter can roll over in less than 5 minutes if it is
	// incrementing at its maximum rate.  Since that amount of time could be less
	// than a management station's poll cycle time, in order to avoid a loss of
	// information, a management station is advised to poll the
	// dot3HCInPauseFrames object for 10 Gb/s or faster interfaces.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3InPauseFrames interface{}

	// A count of MAC Control frames transmitted on this interface with an opcode
	// indicating the PAUSE operation.  This counter does not increment when the
	// interface is operating in half-duplex mode.  For interfaces operating at 10
	// Gb/s, this counter can roll over in less than 5 minutes if it is
	// incrementing at its maximum rate.  Since that amount of time could be less
	// than a management station's poll cycle time, in order to avoid a loss of
	// information, a management station is advised to poll the
	// dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3OutPauseFrames interface{}

	// A count of MAC Control frames received on this interface with an opcode
	// indicating the PAUSE operation.  This counter does not increment when the
	// interface is operating in half-duplex mode.  This counter is a 64 bit
	// version of dot3InPauseFrames.  It should be used on interfaces operating at
	// 10 Gb/s or faster.  Discontinuities in the value of this counter can occur
	// at re-initialization of the management system, and at other times as
	// indicated by the value of ifCounterDiscontinuityTime. The type is
	// interface{} with range: 0..18446744073709551615.
	Dot3HCInPauseFrames interface{}

	// A count of MAC Control frames transmitted on this interface with an opcode
	// indicating the PAUSE operation.  This counter does not increment when the
	// interface is operating in half-duplex mode.  This counter is a 64 bit
	// version of dot3OutPauseFrames.  It should be used on interfaces operating
	// at 10 Gb/s or faster.  Discontinuities in the value of this counter can
	// occur at re-initialization of the management system, and at other times as
	// indicated by the value of ifCounterDiscontinuityTime. The type is
	// interface{} with range: 0..18446744073709551615.
	Dot3HCOutPauseFrames interface{}
}

EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry An entry in the table, containing information about the MAC Control PAUSE function on a single ethernet-like interface.

func (*EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry) GetEntityData

func (dot3PauseEntry *EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode string

EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode represents at greater than 100 Mb/s.

const (
	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode_disabled EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode = "disabled"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode_enabledXmit EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode = "enabledXmit"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode_enabledRcv EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode = "enabledRcv"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode_enabledXmitAndRcv EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseAdminMode = "enabledXmitAndRcv"
)

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode

type EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode string

EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode represents 'disabled(1)'.

const (
	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode_disabled EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode = "disabled"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode_enabledXmit EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode = "enabledXmit"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode_enabledRcv EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode = "enabledRcv"

	EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode_enabledXmitAndRcv EtherLikeMIB_Dot3PauseTable_Dot3PauseEntry_Dot3PauseOperMode = "enabledXmitAndRcv"
)

type EtherLikeMIB_Dot3StatsTable

type EtherLikeMIB_Dot3StatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Statistics for a particular interface to an ethernet-like medium. The type
	// is slice of EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry.
	Dot3StatsEntry []*EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry
}

EtherLikeMIB_Dot3StatsTable Statistics for a collection of ethernet-like interfaces attached to a particular system. There will be one row in this table for each ethernet-like interface in the system.

func (*EtherLikeMIB_Dot3StatsTable) GetEntityData

func (dot3StatsTable *EtherLikeMIB_Dot3StatsTable) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index value that uniquely identifies an
	// interface to an ethernet-like medium.  The interface identified by a
	// particular value of this index is the same interface as identified by the
	// same value of ifIndex. The type is interface{} with range: 1..2147483647.
	Dot3StatsIndex interface{}

	// A count of frames received on a particular interface that are not an
	// integral number of octets in length and do not pass the FCS check.  The
	// count represented by an instance of this object is incremented when the
	// alignmentError status is returned by the MAC service to the LLC (or other
	// MAC user). Received frames for which multiple error conditions pertain are,
	// according to the conventions of IEEE 802.3 Layer Management, counted
	// exclusively according to the error status presented to the LLC.  This
	// counter does not increment for group encoding schemes greater than 4 bits
	// per group.  For interfaces operating at 10 Gb/s, this counter can roll over
	// in less than 5 minutes if it is incrementing at its maximum rate.  Since
	// that amount of time could be less than a management station's poll cycle
	// time, in order to avoid a loss of information, a management station is
	// advised to poll the dot3HCStatsAlignmentErrors object for 10 Gb/s or faster
	// interfaces.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..4294967295.
	Dot3StatsAlignmentErrors interface{}

	// A count of frames received on a particular interface that are an integral
	// number of octets in length but do not pass the FCS check.  This count does
	// not include frames received with frame-too-long or frame-too-short error.
	// The count represented by an instance of this object is incremented when the
	// frameCheckError status is returned by the MAC service to the LLC (or other
	// MAC user). Received frames for which multiple error conditions pertain are,
	// according to the conventions of IEEE 802.3 Layer Management, counted
	// exclusively according to the error status presented to the LLC.  Note:
	// Coding errors detected by the physical layer for speeds above 10 Mb/s will
	// cause the frame to fail the FCS check.  For interfaces operating at 10
	// Gb/s, this counter can roll over in less than 5 minutes if it is
	// incrementing at its maximum rate.  Since that amount of time could be less
	// than a management station's poll cycle time, in order to avoid a loss of
	// information, a management station is advised to poll the
	// dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3StatsFCSErrors interface{}

	// A count of frames that are involved in a single collision, and are
	// subsequently transmitted successfully.  A frame that is counted by an
	// instance of this object is also counted by the corresponding instance of
	// either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and
	// is not counted by the corresponding instance of the
	// dot3StatsMultipleCollisionFrames object.  This counter does not increment
	// when the interface is operating in full-duplex mode.  Discontinuities in
	// the value of this counter can occur at re-initialization of the management
	// system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3StatsSingleCollisionFrames interface{}

	// A count of frames that are involved in more than one collision and are
	// subsequently transmitted successfully.  A frame that is counted by an
	// instance of this object is also counted by the corresponding instance of
	// either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and
	// is not counted by the corresponding instance of the
	// dot3StatsSingleCollisionFrames object.  This counter does not increment
	// when the interface is operating in full-duplex mode.  Discontinuities in
	// the value of this counter can occur at re-initialization of the management
	// system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3StatsMultipleCollisionFrames interface{}

	// A count of times that the SQE TEST ERROR is received on a particular
	// interface. The SQE TEST ERROR is set in accordance with the rules for
	// verification of the SQE detection mechanism in the PLS Carrier Sense
	// Function as described in IEEE Std. 802.3, 2000 Edition, section 7.2.4.6.
	// This counter does not increment on interfaces operating at speeds greater
	// than 10 Mb/s, or on interfaces operating in full-duplex mode.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3StatsSQETestErrors interface{}

	// A count of frames for which the first transmission attempt on a particular
	// interface is delayed because the medium is busy.  The count represented by
	// an instance of this object does not include frames involved in collisions.
	// This counter does not increment when the interface is operating in
	// full-duplex mode.  Discontinuities in the value of this counter can occur
	// at re-initialization of the management system, and at other times as
	// indicated by the value of ifCounterDiscontinuityTime. The type is
	// interface{} with range: 0..4294967295.
	Dot3StatsDeferredTransmissions interface{}

	// The number of times that a collision is detected on a particular interface
	// later than one slotTime into the transmission of a packet.  A (late)
	// collision included in a count represented by an instance of this object is
	// also considered as a (generic) collision for purposes of other
	// collision-related statistics.  This counter does not increment when the
	// interface is operating in full-duplex mode.  Discontinuities in the value
	// of this counter can occur at re-initialization of the management system,
	// and at other times as indicated by the value of ifCounterDiscontinuityTime.
	// The type is interface{} with range: 0..4294967295.
	Dot3StatsLateCollisions interface{}

	// A count of frames for which transmission on a particular interface fails
	// due to excessive collisions.  This counter does not increment when the
	// interface is operating in full-duplex mode.  Discontinuities in the value
	// of this counter can occur at re-initialization of the management system,
	// and at other times as indicated by the value of ifCounterDiscontinuityTime.
	// The type is interface{} with range: 0..4294967295.
	Dot3StatsExcessiveCollisions interface{}

	// A count of frames for which transmission on a particular interface fails
	// due to an internal MAC sublayer transmit error. A frame is only counted by
	// an instance of this object if it is not counted by the corresponding
	// instance of either the dot3StatsLateCollisions object, the
	// dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors
	// object.  The precise meaning of the count represented by an instance of
	// this object is implementation- specific.  In particular, an instance of
	// this object may represent a count of transmission errors on a particular
	// interface that are not otherwise counted.  For interfaces operating at 10
	// Gb/s, this counter can roll over in less than 5 minutes if it is
	// incrementing at its maximum rate.  Since that amount of time could be less
	// than a management station's poll cycle time, in order to avoid a loss of
	// information, a management station is advised to poll the
	// dot3HCStatsInternalMacTransmitErrors object for 10 Gb/s or faster
	// interfaces.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..4294967295.
	Dot3StatsInternalMacTransmitErrors interface{}

	// The number of times that the carrier sense condition was lost or never
	// asserted when attempting to transmit a frame on a particular interface.
	// The count represented by an instance of this object is incremented at most
	// once per transmission attempt, even if the carrier sense condition
	// fluctuates during a transmission attempt.  This counter does not increment
	// when the interface is operating in full-duplex mode.  Discontinuities in
	// the value of this counter can occur at re-initialization of the management
	// system, and at other times as indicated by the value of
	// ifCounterDiscontinuityTime. The type is interface{} with range:
	// 0..4294967295.
	Dot3StatsCarrierSenseErrors interface{}

	// A count of frames received on a particular interface that exceed the
	// maximum permitted frame size.  The count represented by an instance of this
	// object is incremented when the frameTooLong status is returned by the MAC
	// service to the LLC (or other MAC user). Received frames for which multiple
	// error conditions pertain are, according to the conventions of IEEE 802.3
	// Layer Management, counted exclusively according to the error status
	// presented to the LLC.  For interfaces operating at 10 Gb/s, this counter
	// can roll over in less than 80 minutes if it is incrementing at its maximum
	// rate.  Since that amount of time could be less than a management station's
	// poll cycle time, in order to avoid a loss of information, a management
	// station is advised to poll the dot3HCStatsFrameTooLongs object for 10 Gb/s
	// or faster interfaces.  Discontinuities in the value of this counter can
	// occur at re-initialization of the management system, and at other times as
	// indicated by the value of ifCounterDiscontinuityTime. The type is
	// interface{} with range: 0..4294967295.
	Dot3StatsFrameTooLongs interface{}

	// A count of frames for which reception on a particular interface fails due
	// to an internal MAC sublayer receive error. A frame is only counted by an
	// instance of this object if it is not counted by the corresponding instance
	// of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors
	// object, or the dot3StatsFCSErrors object.  The precise meaning of the count
	// represented by an instance of this object is implementation- specific.  In
	// particular, an instance of this object may represent a count of receive
	// errors on a particular interface that are not otherwise counted.  For
	// interfaces operating at 10 Gb/s, this counter can roll over in less than 5
	// minutes if it is incrementing at its maximum rate.  Since that amount of
	// time could be less than a management station's poll cycle time, in order to
	// avoid a loss of information, a management station is advised to poll the
	// dot3HCStatsInternalMacReceiveErrors object for 10 Gb/s or faster
	// interfaces.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of ifCounterDiscontinuityTime. The type is interface{} with
	// range: 0..4294967295.
	Dot3StatsInternalMacReceiveErrors interface{}

	// ******** THIS OBJECT IS DEPRECATED ********  This object contains an OBJECT
	// IDENTIFIER which identifies the chipset used to realize the interface.
	// Ethernet-like interfaces are typically built out of several different
	// chips. The MIB implementor is presented with a decision of which chip to
	// identify via this object. The implementor should identify the chip which is
	// usually called the Medium Access Control chip. If no such chip is easily
	// identifiable, the implementor should identify the chip which actually
	// gathers the transmit and receive statistics and error indications. This
	// would allow a manager station to correlate the statistics and the chip
	// generating them, giving it the ability to take into account any known
	// anomalies in the chip.  This object has been deprecated.  Implementation
	// feedback indicates that it is of limited use for debugging network problems
	// in the field, and the administrative overhead involved in maintaining a
	// registry of chipset OIDs is not justified. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	Dot3StatsEtherChipSet interface{}

	// For an interface operating at 100 Mb/s, the number of times there was an
	// invalid data symbol when a valid carrier was present.  For an interface
	// operating in half-duplex mode at 1000 Mb/s, the number of times the
	// receiving media is non-idle (a carrier event) for a period of time equal to
	// or greater than slotTime, and during which there was at least one
	// occurrence of an event that causes the PHY to indicate 'Data reception
	// error' or 'carrier extend error' on the GMII.  For an interface operating
	// in full-duplex mode at 1000 Mb/s, the number of times the receiving media
	// is non-idle (a carrier event) for a period of time equal to or greater than
	// minFrameSize, and during which there was at least one occurrence of an
	// event that causes the PHY to indicate 'Data reception error' on the GMII.
	// For an interface operating at 10 Gb/s, the number of times the receiving
	// media is non-idle (a carrier event) for a period of time equal to or
	// greater than minFrameSize, and during which there was at least one
	// occurrence of an event that causes the PHY to indicate 'Receive Error' on
	// the XGMII.  The count represented by an instance of this object is
	// incremented at most once per carrier event, even if multiple symbol errors
	// occur during the carrier event.  This count does not increment if a
	// collision is present.  This counter does not increment when the interface
	// is operating at 10 Mb/s.  For interfaces operating at 10 Gb/s, this counter
	// can roll over in less than 5 minutes if it is incrementing at its maximum
	// rate.  Since that amount of time could be less than a management station's
	// poll cycle time, in order to avoid a loss of information, a management
	// station is advised to poll the dot3HCStatsSymbolErrors object for 10 Gb/s
	// or faster interfaces.  Discontinuities in the value of this counter can
	// occur at re-initialization of the management system, and at other times as
	// indicated by the value of ifCounterDiscontinuityTime. The type is
	// interface{} with range: 0..4294967295.
	Dot3StatsSymbolErrors interface{}

	// The current mode of operation of the MAC entity.  'unknown' indicates that
	// the current duplex mode could not be determined.  Management control of the
	// duplex mode is accomplished through the MAU MIB.  When an interface does
	// not support autonegotiation, or when autonegotiation is not enabled, the
	// duplex mode is controlled using ifMauDefaultType.  When autonegotiation is
	// supported and enabled, duplex mode is controlled using
	// ifMauAutoNegAdvertisedBits.  In either case, the currently operating duplex
	// mode is reflected both in this object and in ifMauType.  Note that this
	// object provides redundant information with ifMauType.  Normally, redundant
	// objects are discouraged.  However, in this instance, it allows a management
	// application to determine the duplex status of an interface without having
	// to know every possible value of ifMauType.  This was felt to be
	// sufficiently valuable to justify the redundancy. The type is
	// Dot3StatsDuplexStatus.
	Dot3StatsDuplexStatus interface{}

	// 'true' for interfaces operating at speeds above 1000 Mb/s that support Rate
	// Control through lowering the average data rate of the MAC sublayer, with
	// frame granularity, and 'false' otherwise. The type is bool.
	Dot3StatsRateControlAbility interface{}

	// The current Rate Control mode of operation of the MAC sublayer of this
	// interface. The type is Dot3StatsRateControlStatus.
	Dot3StatsRateControlStatus interface{}
}

EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry Statistics for a particular interface to an ethernet-like medium.

func (*EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry) GetEntityData

func (dot3StatsEntry *EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry) GetEntityData() *types.CommonEntityData

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus string

EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus represents valuable to justify the redundancy.

const (
	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus_unknown EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus = "unknown"

	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus_halfDuplex EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus = "halfDuplex"

	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus_fullDuplex EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsDuplexStatus = "fullDuplex"
)

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus

type EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus string

EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus represents the MAC sublayer of this interface.

const (
	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus_rateControlOff EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus = "rateControlOff"

	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus_rateControlOn EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus = "rateControlOn"

	EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus_unknown EtherLikeMIB_Dot3StatsTable_Dot3StatsEntry_Dot3StatsRateControlStatus = "unknown"
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL