dial_control_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module to describe peer information for demand access and possibly other kinds of interfaces.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type DIALCONTROLMIB

type DIALCONTROLMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	DialCtlConfiguration DIALCONTROLMIB_DialCtlConfiguration

	CallHistory DIALCONTROLMIB_CallHistory

	// The list of peers from which the managed device will accept calls or to
	// which it will place them.
	DialCtlPeerCfgTable DIALCONTROLMIB_DialCtlPeerCfgTable

	// A table containing information about active calls to a specific
	// destination.
	CallActiveTable DIALCONTROLMIB_CallActiveTable

	// A table containing information about specific calls to a specific
	// destination.
	CallHistoryTable DIALCONTROLMIB_CallHistoryTable
}

DIALCONTROLMIB

func (*DIALCONTROLMIB) GetEntityData

func (dIALCONTROLMIB *DIALCONTROLMIB) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallActiveTable

type DIALCONTROLMIB_CallActiveTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The information regarding a single active Connection. An entry in this
	// table will be created when a call is started. An entry in this table will
	// be deleted when an active call clears. The type is slice of
	// DIALCONTROLMIB_CallActiveTable_CallActiveEntry.
	CallActiveEntry []*DIALCONTROLMIB_CallActiveTable_CallActiveEntry
}

DIALCONTROLMIB_CallActiveTable A table containing information about active calls to a specific destination.

func (*DIALCONTROLMIB_CallActiveTable) GetEntityData

func (callActiveTable *DIALCONTROLMIB_CallActiveTable) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of sysUpTime when the call associated to
	// this entry was started. This will be useful for an NMS to retrieve all
	// calls after a specific time. Also, this object can be useful in finding
	// large delays between the time the call was started and the time the call
	// was connected. For ISDN media, this will be the time when the setup message
	// was received from or sent to the network. The type is interface{} with
	// range: 0..4294967295.
	CallActiveSetupTime interface{}

	// This attribute is a key. Small index variable to distinguish calls that
	// start in the same hundredth of a second. The type is interface{} with
	// range: 1..2147483647.
	CallActiveIndex interface{}

	// The number this call is connected to. If the number is not available, then
	// it will have a length of zero. The type is string.
	CallActivePeerAddress interface{}

	// The subaddress this call is connected to. If the subaddress is undefined or
	// not available, this will be a zero length string. The type is string.
	CallActivePeerSubAddress interface{}

	// This is the Id value of the peer table entry to which this call was made.
	// If a peer table entry for this call does not exist or is unknown, the value
	// of this object will be zero. The type is interface{} with range:
	// 0..2147483647.
	CallActivePeerId interface{}

	// This is the ifIndex value of the peer table entry to which this call was
	// made. If a peer table entry for this call does not exist or is unknown, the
	// value of this object will be zero. The type is interface{} with range:
	// 0..2147483647.
	CallActivePeerIfIndex interface{}

	// This is the ifIndex value of the logical interface through which this call
	// was made. For ISDN media, this would be the ifIndex of the B channel which
	// was used for this call. If the ifIndex value is unknown, the value of this
	// object will be zero. The type is interface{} with range: 0..2147483647.
	CallActiveLogicalIfIndex interface{}

	// The value of sysUpTime when the call was connected. If the call is not
	// connected, this object will have a value of zero. The type is interface{}
	// with range: 0..4294967295.
	CallActiveConnectTime interface{}

	// The current call state. unknown(1)     - The call state is unknown.
	// connecting(2)  - A connection attempt (outgoing call)                  is
	// being made. connected(3)   - An incoming call is in the process
	// of validation. active(4)      - The call is active. The type is
	// CallActiveCallState.
	CallActiveCallState interface{}

	// The call origin. The type is CallActiveCallOrigin.
	CallActiveCallOrigin interface{}

	// The number of charged units for this connection. For incoming calls or if
	// charging information is not supplied by the switch, the value of this
	// object will be zero. The type is interface{} with range: 0..4294967295.
	CallActiveChargedUnits interface{}

	// The information type for this call. The type is CallActiveInfoType.
	CallActiveInfoType interface{}

	// The number of packets which were transmitted for this call. The type is
	// interface{} with range: 0..4294967295.
	CallActiveTransmitPackets interface{}

	// The number of bytes which were transmitted for this call. The type is
	// interface{} with range: 0..4294967295.
	CallActiveTransmitBytes interface{}

	// The number of packets which were received for this call. The type is
	// interface{} with range: 0..4294967295.
	CallActiveReceivePackets interface{}

	// The number of bytes which were received for this call. The type is
	// interface{} with range: 0..4294967295.
	CallActiveReceiveBytes interface{}
}

DIALCONTROLMIB_CallActiveTable_CallActiveEntry The information regarding a single active Connection. An entry in this table will be created when a call is started. An entry in this table will be deleted when an active call clears.

func (*DIALCONTROLMIB_CallActiveTable_CallActiveEntry) GetEntityData

func (callActiveEntry *DIALCONTROLMIB_CallActiveTable_CallActiveEntry) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin string

DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin represents The call origin.

const (
	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin_originate DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin = "originate"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin_answer DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin = "answer"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin_callback DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallOrigin = "callback"
)

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState string

DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState represents active(4) - The call is active.

const (
	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState_unknown DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState = "unknown"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState_connecting DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState = "connecting"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState_connected DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState = "connected"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState_active DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveCallState = "active"
)

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType

type DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType string

DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType represents The information type for this call.

const (
	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_other DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "other"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_speech DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "speech"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_unrestrictedDigital DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "unrestrictedDigital"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_unrestrictedDigital56 DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "unrestrictedDigital56"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_restrictedDigital DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "restrictedDigital"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_audio31 DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "audio31"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_audio7 DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "audio7"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_video DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "video"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_packetSwitched DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "packetSwitched"

	DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType_fax DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveInfoType = "fax"
)

type DIALCONTROLMIB_CallHistory

type DIALCONTROLMIB_CallHistory struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The upper limit on the number of entries that the callHistoryTable may
	// contain.  A value of 0 will prevent any history from being retained. When
	// this table is full, the oldest entry will be deleted and the new one will
	// be created. The type is interface{} with range: 0..2147483647.
	CallHistoryTableMaxLength interface{}

	// The minimum amount of time that an callHistoryEntry will be maintained
	// before being deleted. A value of 0 will prevent any history from being
	// retained in the callHistoryTable, but will neither prevent callCompletion
	// traps being generated nor affect other tables. The type is interface{} with
	// range: 0..2147483647. Units are minutes.
	CallHistoryRetainTimer interface{}
}

DIALCONTROLMIB_CallHistory

func (*DIALCONTROLMIB_CallHistory) GetEntityData

func (callHistory *DIALCONTROLMIB_CallHistory) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallHistoryTable

type DIALCONTROLMIB_CallHistoryTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The information regarding a single Connection. The type is slice of
	// DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry.
	CallHistoryEntry []*DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry
}

DIALCONTROLMIB_CallHistoryTable A table containing information about specific calls to a specific destination.

func (*DIALCONTROLMIB_CallHistoryTable) GetEntityData

func (callHistoryTable *DIALCONTROLMIB_CallHistoryTable) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 0..4294967295.
	// Refers to
	// dial_control_mib.DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveSetupTime
	CallActiveSetupTime interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// dial_control_mib.DIALCONTROLMIB_CallActiveTable_CallActiveEntry_CallActiveIndex
	CallActiveIndex interface{}

	// The number this call was connected to. If the number is not available, then
	// it will have a length of zero. The type is string.
	CallHistoryPeerAddress interface{}

	// The subaddress this call was connected to. If the subaddress is undefined
	// or not available, this will be a zero length string. The type is string.
	CallHistoryPeerSubAddress interface{}

	// This is the Id value of the peer table entry to which this call was made.
	// If a peer table entry for this call does not exist, the value of this
	// object will be zero. The type is interface{} with range: 0..2147483647.
	CallHistoryPeerId interface{}

	// This is the ifIndex value of the peer table entry to which this call was
	// made. If a peer table entry for this call does not exist, the value of this
	// object will be zero. The type is interface{} with range: 0..2147483647.
	CallHistoryPeerIfIndex interface{}

	// This is the ifIndex value of the logical interface through which this call
	// was made. For ISDN media, this would be the ifIndex of the B channel which
	// was used for this call. The type is interface{} with range: 1..2147483647.
	CallHistoryLogicalIfIndex interface{}

	// The encoded network cause value associated with this call.  The value of
	// this object will depend on the interface type as well as on the protocol
	// and protocol version being used on this interface. Some references for
	// possible cause values are given below. The type is string with length:
	// 0..4.
	CallHistoryDisconnectCause interface{}

	// ASCII text describing the reason for call termination.  This object exists
	// because it would be impossible for a management station to store all
	// possible cause values for all types of interfaces. It should be used only
	// if a management station is unable to decode the value of
	// dialCtlPeerStatsLastDisconnectCause. The type is string.
	CallHistoryDisconnectText interface{}

	// The value of sysUpTime when the call was connected. The type is interface{}
	// with range: 0..4294967295.
	CallHistoryConnectTime interface{}

	// The value of sysUpTime when the call was disconnected. The type is
	// interface{} with range: 0..4294967295.
	CallHistoryDisconnectTime interface{}

	// The call origin. The type is CallHistoryCallOrigin.
	CallHistoryCallOrigin interface{}

	// The number of charged units for this connection. For incoming calls or if
	// charging information is not supplied by the switch, the value of this
	// object will be zero. The type is interface{} with range: 0..4294967295.
	CallHistoryChargedUnits interface{}

	// The information type for this call. The type is CallHistoryInfoType.
	CallHistoryInfoType interface{}

	// The number of packets which were transmitted while this call was active.
	// The type is interface{} with range: 0..4294967295.
	CallHistoryTransmitPackets interface{}

	// The number of bytes which were transmitted while this call was active. The
	// type is interface{} with range: 0..4294967295.
	CallHistoryTransmitBytes interface{}

	// The number of packets which were received while this call was active. The
	// type is interface{} with range: 0..4294967295.
	CallHistoryReceivePackets interface{}

	// The number of bytes which were received while this call was active. The
	// type is interface{} with range: 0..4294967295.
	CallHistoryReceiveBytes interface{}
}

DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry The information regarding a single Connection.

func (*DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry) GetEntityData

func (callHistoryEntry *DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin string

DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin represents The call origin.

const (
	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin_originate DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin = "originate"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin_answer DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin = "answer"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin_callback DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryCallOrigin = "callback"
)

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType

type DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType string

DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType represents The information type for this call.

const (
	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_other DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "other"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_speech DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "speech"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_unrestrictedDigital DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "unrestrictedDigital"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_unrestrictedDigital56 DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "unrestrictedDigital56"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_restrictedDigital DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "restrictedDigital"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_audio31 DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "audio31"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_audio7 DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "audio7"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_video DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "video"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_packetSwitched DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "packetSwitched"

	DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType_fax DIALCONTROLMIB_CallHistoryTable_CallHistoryEntry_CallHistoryInfoType = "fax"
)

type DIALCONTROLMIB_DialCtlConfiguration

type DIALCONTROLMIB_DialCtlConfiguration struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The security level for acceptance of incoming calls. acceptNone(1)  -
	// incoming calls will not be accepted acceptAll(2)   - incoming calls will be
	// accepted,                  even if there is no matching entry
	// in the dialCtlPeerCfgTable acceptKnown(3) - incoming calls will be accepted
	// only                  if there is a matching entry in the
	// dialCtlPeerCfgTable. The type is DialCtlAcceptMode.
	DialCtlAcceptMode interface{}

	// This object indicates whether dialCtlPeerCallInformation and
	// dialCtlPeerCallSetup traps should be generated for all peers. If the value
	// of this object is enabled(1), traps will be generated for all peers. If the
	// value of this object is disabled(2), traps will be generated only for peers
	// having dialCtlPeerCfgTrapEnable set to enabled(1). The type is
	// DialCtlTrapEnable.
	DialCtlTrapEnable interface{}
}

DIALCONTROLMIB_DialCtlConfiguration

func (*DIALCONTROLMIB_DialCtlConfiguration) GetEntityData

func (dialCtlConfiguration *DIALCONTROLMIB_DialCtlConfiguration) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode

type DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode string

DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode represents dialCtlPeerCfgTable

const (
	DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode_acceptNone DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode = "acceptNone"

	DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode_acceptAll DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode = "acceptAll"

	DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode_acceptKnown DIALCONTROLMIB_DialCtlConfiguration_DialCtlAcceptMode = "acceptKnown"
)

type DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable

type DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable string

DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable represents to enabled(1).

const (
	DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable_enabled DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable = "enabled"

	DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable_disabled DIALCONTROLMIB_DialCtlConfiguration_DialCtlTrapEnable = "disabled"
)

type DIALCONTROLMIB_DialCtlPeerCfgTable

type DIALCONTROLMIB_DialCtlPeerCfgTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Configuration data for a single Peer. This entry is effectively permanent,
	// and contains information to identify the peer, how to connect to the peer,
	// how to identify the peer and its permissions. The value of
	// dialCtlPeerCfgOriginateAddress must be specified before a new row in this
	// table can become active(1). Any writeable parameters in an existing entry
	// can be modified while the entry is active. The modification will take
	// effect when the peer in question will be called the next time. An entry in
	// this table can only be created if the associated ifEntry already exists.
	// The type is slice of
	// DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry.
	DialCtlPeerCfgEntry []*DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry
}

DIALCONTROLMIB_DialCtlPeerCfgTable The list of peers from which the managed device will accept calls or to which it will place them.

func (*DIALCONTROLMIB_DialCtlPeerCfgTable) GetEntityData

func (dialCtlPeerCfgTable *DIALCONTROLMIB_DialCtlPeerCfgTable) GetEntityData() *types.CommonEntityData

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object identifies a single peer. There may be
	// several entries in this table for one peer, defining different ways of
	// reaching this peer. Thus, there may be several entries in this table with
	// the same value of dialCtlPeerCfgId. Multiple entries for one peer may be
	// used to support multilink as well as backup lines. A single peer will be
	// identified by a unique value of this object. Several entries for one peer
	// MUST have the same value of dialCtlPeerCfgId, but different ifEntries and
	// thus different values of ifIndex. The type is interface{} with range:
	// 1..2147483647.
	DialCtlPeerCfgId interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to if_mib.IFMIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// The interface type to be used for calling this peer. In case of ISDN, the
	// value of isdn(63) is to be used. The type is IANAifType.
	DialCtlPeerCfgIfType interface{}

	// ifIndex value of an interface the peer will have to be called on. For
	// example, on an ISDN interface, this can be the ifIndex value of a D channel
	// or the ifIndex value of a B channel, whatever is appropriate for a given
	// peer. As an example, for Basic Rate leased lines it will be necessary to
	// specify a B channel ifIndex, while for     semi-permanent connections the D
	// channel ifIndex has to be specified. If the interface can be dynamically
	// assigned, this object has a value of zero. The type is interface{} with
	// range: 0..2147483647.
	DialCtlPeerCfgLowerIf interface{}

	// Call Address at which the peer will be called. Think of this as the set of
	// characters following 'ATDT ' or the 'phone number' included in a D channel
	// call request.  The structure of this information will be switch type
	// specific. If there is no address information required for reaching the
	// peer, i.e., for leased lines, this object will be a zero length string. The
	// type is string.
	DialCtlPeerCfgOriginateAddress interface{}

	// Calling Party Number information element, as for example passed in an ISDN
	// SETUP message by a PBX or switch, for incoming calls. This address can be
	// used to identify the peer. If this address is either unknown or identical
	// to dialCtlPeerCfgOriginateAddress, this object will be a zero length
	// string. The type is string.
	DialCtlPeerCfgAnswerAddress interface{}

	// Subaddress at which the peer will be called. If the subaddress is undefined
	// for the given media or unused, this is a zero length string. The type is
	// string.
	DialCtlPeerCfgSubAddress interface{}

	// Closed User Group at which the peer will be called. If the Closed User
	// Group is undefined for the given media or unused, this is a zero length
	// string. The type is string.
	DialCtlPeerCfgClosedUserGroup interface{}

	// The desired information transfer speed in bits/second when calling this
	// peer. The detailed media specific information, e.g. information type and
	// information transfer rate for ISDN circuits, has to be extracted from this
	// object. If the transfer speed to be used is unknown or the default speed
	// for this type of interfaces, the value of this object may be zero. The type
	// is interface{} with range: 0..2147483647.
	DialCtlPeerCfgSpeed interface{}

	// The Information Transfer Capability to be used when calling this peer.
	// speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7)
	// refer to data mode connections. The type is DialCtlPeerCfgInfoType.
	DialCtlPeerCfgInfoType interface{}

	// Applicable permissions. callback(4) either rejects the call and then calls
	// back, or uses the 'Reverse charging' information element if it is
	// available. Note that callback(4) is supposed to control charging, not
	// security, and applies to callback prior to accepting a call. Callback for
	// security reasons can be handled using PPP callback. The type is
	// DialCtlPeerCfgPermission.
	DialCtlPeerCfgPermission interface{}

	// The connection will be automatically disconnected if no longer carrying
	// useful data for a time period, in seconds, specified in this object. Useful
	// data in this context refers to forwarding packets, including routing
	// information; it excludes the encapsulator maintenance frames. A value of
	// zero means the connection will not be automatically taken down due to
	// inactivity, which implies that it is a dedicated circuit. The type is
	// interface{} with range: 0..2147483647. Units are seconds.
	DialCtlPeerCfgInactivityTimer interface{}

	// Minimum duration of a call in seconds, starting from the time the call is
	// connected until the call is disconnected. This is to accomplish the fact
	// that in most countries charging applies to units of time, which should be
	// matched as closely as possible. The type is interface{} with range:
	// 0..2147483647.
	DialCtlPeerCfgMinDuration interface{}

	// Maximum call duration in seconds. Zero means 'unlimited'. The type is
	// interface{} with range: 0..2147483647.
	DialCtlPeerCfgMaxDuration interface{}

	// The call timeout time in seconds. The default value of zero means that the
	// call timeout as specified for the media in question will apply. The type is
	// interface{} with range: 0..2147483647. Units are seconds.
	DialCtlPeerCfgCarrierDelay interface{}

	// The number of calls to a non-responding address that may be made. A retry
	// count of zero means there is no bound. The intent is to bound the number of
	// successive calls to an address which is inaccessible, or which refuses
	// those calls.  Some countries regulate the number of call retries to a given
	// peer that can be made. The type is interface{} with range: 0..2147483647.
	DialCtlPeerCfgCallRetries interface{}

	// The time in seconds between call retries if a peer cannot be reached. A
	// value of zero means that call retries may be done without any delay. The
	// type is interface{} with range: 0..2147483647. Units are seconds.
	DialCtlPeerCfgRetryDelay interface{}

	// The time in seconds after which call attempts are to be placed again after
	// a peer has been noticed to be unreachable, i.e. after
	// dialCtlPeerCfgCallRetries unsuccessful call attempts. A value of zero means
	// that a peer will not be called again after dialCtlPeerCfgCallRetries
	// unsuccessful call attempts. The type is interface{} with range:
	// 0..2147483647. Units are seconds.
	DialCtlPeerCfgFailureDelay interface{}

	// This object indicates whether dialCtlPeerCallInformation and
	// dialCtlPeerCallSetup traps should be generated for this peer. The type is
	// DialCtlPeerCfgTrapEnable.
	DialCtlPeerCfgTrapEnable interface{}

	// Status of one row in this table. The type is RowStatus.
	DialCtlPeerCfgStatus interface{}

	// Accumulated connect time to the peer since system startup. This is the
	// total connect time, i.e. the connect time for outgoing calls plus the time
	// for incoming calls. The type is interface{} with range: 0..4294967295.
	// Units are seconds.
	DialCtlPeerStatsConnectTime interface{}

	// The total number of charging units applying to this peer since system
	// startup. Only the charging units applying to the local interface, i.e. for
	// originated calls or for calls with 'Reverse charging' being active, will be
	// counted here. The type is interface{} with range: 0..4294967295.
	DialCtlPeerStatsChargedUnits interface{}

	// Number of completed calls to this peer. The type is interface{} with range:
	// 0..4294967295.
	DialCtlPeerStatsSuccessCalls interface{}

	// Number of failed call attempts to this peer since system startup. The type
	// is interface{} with range: 0..4294967295.
	DialCtlPeerStatsFailCalls interface{}

	// Number of calls from this peer accepted since system startup. The type is
	// interface{} with range: 0..4294967295.
	DialCtlPeerStatsAcceptCalls interface{}

	// Number of calls from this peer refused since system startup. The type is
	// interface{} with range: 0..4294967295.
	DialCtlPeerStatsRefuseCalls interface{}

	// The encoded network cause value associated with the last call. This object
	// will be updated whenever a call is started or cleared. The value of this
	// object will depend on the interface type as well as on the protocol and
	// protocol version being used on this interface. Some references for possible
	// cause values are given below. The type is string with length: 0..4.
	DialCtlPeerStatsLastDisconnectCause interface{}

	// ASCII text describing the reason for the last call termination.  This
	// object exists because it would be impossible for a management station to
	// store all possible cause values for all types of interfaces. It should be
	// used only if a management station is unable to decode the value of
	// dialCtlPeerStatsLastDisconnectCause.  This object will be updated whenever
	// a call is started or cleared. The type is string.
	DialCtlPeerStatsLastDisconnectText interface{}

	// The value of sysUpTime when the last call to this peer was started. For
	// ISDN media, this will be the time when the setup message was received from
	// or sent to the network. This object will be updated whenever a call is
	// started or cleared. The type is interface{} with range: 0..4294967295.
	DialCtlPeerStatsLastSetupTime interface{}
}

DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry Configuration data for a single Peer. This entry is effectively permanent, and contains information to identify the peer, how to connect to the peer, how to identify the peer and its permissions. The value of dialCtlPeerCfgOriginateAddress must be specified before a new row in this table can become active(1). Any writeable parameters in an existing entry can be modified while the entry is active. The modification will take effect when the peer in question will be called the next time. An entry in this table can only be created if the associated ifEntry already exists.

func (*DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry) GetEntityData

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType string

DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType represents connections.

const (
	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_other DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "other"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_speech DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "speech"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_unrestrictedDigital DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "unrestrictedDigital"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_unrestrictedDigital56 DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "unrestrictedDigital56"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_restrictedDigital DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "restrictedDigital"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_audio31 DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "audio31"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_audio7 DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "audio7"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_video DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "video"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_packetSwitched DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "packetSwitched"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType_fax DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgInfoType = "fax"
)

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission string

DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission represents PPP callback.

const (
	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission_originate DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission = "originate"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission_answer DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission = "answer"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission_both DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission = "both"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission_callback DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission = "callback"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission_none DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgPermission = "none"
)

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable

type DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable string

DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable represents this peer.

const (
	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable_enabled DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable = "enabled"

	DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable_disabled DIALCONTROLMIB_DialCtlPeerCfgTable_DialCtlPeerCfgEntry_DialCtlPeerCfgTrapEnable = "disabled"
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL