cisco_subscriber_session_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This MIB defines objects describing subscriber sessions, or more specifically, subscriber sessions terminated by a RAS. A subscriber session consists of the traffic between a CPE and a NAS, as illustrated in the diagram below.

                Service
Access          Provider
Network         Network

+--+ +---+ +--+ { } +---+ { } |PC+--+CPE+--+AN+--{ }--+NAS+--{ } +--+ +---+ +--+ { } +---+ { }

|                 |
|<--------------->|
     subscriber
      session

A subscriber session behaves according to the FSM illustrated below.

     +-----------------+
+--->|  DISCONNECTED   |<-------+
|    +--------+--------+        |
|             |                 |
| failed      | initiated       | disconnect
|             V                 |
|    +-----------------+        |
+----+     PENDING     +--------+
     +--------+--------+        |
              |                 |
              | established     |
              V                 |

+----------------------------+ | | UP | | | +---+ | +-----------------+ | | | UNAUTHENTICATED | | | +--------+--------+ | | | | | | authenticated | | V | | +-----------------+ | | | AUTHENTICATED | | | +-----------------+ | | | +----------------------------+

A subscriber session in the DISCONNECTED state technically doesn't exist; that is, the system does not maintain a context to describe a disconnected subscriber session.

Once the system detects the initiation of a subscriber session, then it creates a context and places the subscriber session in the PENDING state. The initiation of a subscriber session can occur either through provisioning or the reception of a packet. In the PENDING state, a system does not forward subscriber traffic.

A pending subscriber session can become DISCONNECTED if it fails to come up (e.g., a timeout) or if the system or the subscriber explicitly terminates the subscriber session.

A pending subscriber session can become UP if the system successfully configures and applies any relevant policies. Once in the UP state, a system forwards subscriber traffic.

A operationally UP subscriber session can become DISCONNECTED if either system or the subscriber terminates it.

A operationally UP subscriber session can either be UNAUTHENTICATED or AUTHENTICATED. When the system is in the process of checking a the credentials associated with a subscriber session, it is in the UNAUTHENTICATED state. When the system successfully completes this process, it transitions the subscriber session to the AUTHENTICATED state. If the process fails, then the system terminates the subscriber session.

Besides describing individual subscriber sessions, this MIB module provides an EMS/NMS with the means to perform the following functions:

1) Enumerate subscriber sessions by ifIndex.

  1. Enumerate subscriber sessions by subscriber session type and ifIndex.
  1. Monitor aggregated statistics relating to subscriber sessions:

    a. System-wide b. System-wide by subscriber session type c. Per node d. Per node by subscriber session type

  1. Collect 15-minute aggregated performance data history relating to subscriber sessions:

    a. System-wide b. System-wide by subscriber session type c. Per node d. Per node by subscriber session type

  1. Submit a query for a report containing those subscriber sessions that match a specified identity match criteria.
  1. Terminate those subscriber session that match a specified identify match criteria.

GLOSSARY ========

Access Concentrator

See NAS.

Access Network

The network that provides connectivity between a AN and NAS.
An access network may provide L2 or L3 connectivity. If the
access network provide L2 connectivity, it may switch
traffic or tunnel it through a MPLS or IP network.

AN (Access Node)

A device (e.g., a DSLAM) that multiplexes or switches
traffic between many CPEs and an access network.

BRAS (Broadband Remote Access Server)

See NAS.

CPE (Customer Premise Equipment)

A device (e.g., a DSL modem) that connects a customer's
network to an AN.

DHCP (Dynamic Host Configuration Protocol)

The protocol that provides a framework for transacting
configuration information to devices on an IP network, as
specified by RFC-2131.

NAS (Network Access Server)

A device that switches or routes traffic between subscriber
sessions and service provider networks.

Network Service

Access to the Internet backbone, voice, video, or other
content.

Node

A physical entity capable of maintaining a subscriber
session within a distributed system.  The notion of a node
is not applicable to a centralized system.

PADI (PPPoE Active Discovery Initiation)

A subscriber broadcasts a PADI packet to start the process
of discovering access concentrators capable of serving it.

PADO (PPPoE Active Discovery Offer)

The packet sent by an access concentrator to a subscriber
indicating that it can serve the subscriber.

PADR (PPPoE Active Discovery Request)

The packet sent by a subscriber to an access concentrator
requesting a PPPoE connection.

PADS (PPPoE Active Discovery Session-confirmation)

The packet sent by an access concentrator to a subscriber
confirming the request for a PPPoE connection.  Once this
packet has been sent, then the PPP can proceed as specified
by RFC-1661.

PADT (PPPoE Active Discovery Terminate)

The packet indicating that a PPPoE connection has been
terminated.  Either the subscriber or the access
concentrator can send this packet.

PPP (Point-to-Point Protocol)

The standard method for transporting multi-protocol
datagrams over point-to-point links, as defined by RFC-1661.
The PPP specifies the encapsulation for these datagrams and
the protocols necessary for establishing, configuring, and
maintaining connectivity.

PPPoE (Point-to-Point Protocol over Ethernet)

The protocol and encapsulation necessary to support a PPP
connection over an Ethernet connection, as defined by IETF
RFC-2516.

Service Provider Network

The network that provides connectivity between a NAS and a
network service.

Subscriber

A customer of a network service.

Subscriber Session

A context maintained by a NAS for the purpose of classifying
a subscriber's traffic, maintaining a subscriber's identity,
applying configuration and policies, and maintaining
statistics.  For more information on the types of subscriber
sessions, see the CISCO-SUBSCRIBER-SESSION-TC-MIB.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOSUBSCRIBERSESSIONMIB

type CISCOSUBSCRIBERSESSIONMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	CsubJob CISCOSUBSCRIBERSESSIONMIB_CsubJob

	CsubAggThresh CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh

	// This table describes a list of subscriber sessions currently maintained by
	// the system.  This table has a sparse dependent relationship on the ifTable,
	// containing a row for each interface having an interface type describing a
	// subscriber session.
	CsubSessionTable CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable

	// This table describes a list of subscriber sessions currently maintained by
	// the system.  The tables sorts the subscriber sessions first by the
	// subscriber session's type and second by the ifIndex assigned to the
	// subscriber session.
	CsubSessionByTypeTable CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable

	// This table contains sets of aggregated statistics relating to subscriber
	// sessions, where each set has a unique scope of aggregation.
	CsubAggStatsTable CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable

	// This table contains aggregated subscriber session performance data
	// collected for as much as a day's worth of 15-minute measurement intervals.
	// This table has an expansion dependent relationship on the
	// csubAggStatsTable, containing zero or more rows for each row contained by
	// the csubAggStatsTable.  Observe that the collection and maintenance of
	// aggregated subscriber performance data is OPTIONAL for all scopes of
	// aggregation.  However, an implementation should maintain at least one
	// interval for the 'scope of aggregation' that contains all subscriber
	// sessions maintained by the system.
	CsubAggStatsIntTable CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable

	// Please enter the Table Description here.
	CsubAggStatsThreshTable CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable

	// This table contains the subscriber session jobs submitted by the EMS/NMS.
	CsubJobTable CISCOSUBSCRIBERSESSIONMIB_CsubJobTable

	// This table contains subscriber session job parameters describing match
	// criteria.  This table has a sparse-dependent relationship on the
	// csubJobTable, containing a row for each job having a csubJobType of 'query'
	// or 'clear'.
	CsubJobMatchParamsTable CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable

	// This table contains subscriber session job parameters describing query
	// parameters.  This table has a sparse-dependent relationship on the
	// csubJobTable, containing a row for each job having a csubJobType of
	// 'query'.
	CsubJobQueryParamsTable CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable

	// This table lists the subscriber session jobs currently pending in the
	// subscriber session job queue.
	CsubJobQueueTable CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable

	// This table contains the reports corresponding to subscriber session jobs
	// that have a csubJobType of 'query' and csubJobState of 'finished'.  This
	// table has an expansion dependent relationship on the csubJobTable,
	// containing zero or more rows for each job.
	CsubJobReportTable CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable
}

CISCOSUBSCRIBERSESSIONMIB

func (*CISCOSUBSCRIBERSESSIONMIB) GetEntityData

func (cISCOSUBSCRIBERSESSIONMIB *CISCOSUBSCRIBERSESSIONMIB) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry contains the aggregated subscriber session performance data
	// collected over a single 15-minute measurement interval within a 'scope of
	// aggregation'.  For further details regarding 'scope of aggregation', see
	// the descriptive text associated with the csubAggStatsEntry. The type is
	// slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry.
	CsubAggStatsIntEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable This table contains aggregated subscriber session performance data collected for as much as a day's worth of 15-minute measurement intervals.

This table has an expansion dependent relationship on the csubAggStatsTable, containing zero or more rows for each row contained by the csubAggStatsTable.

Observe that the collection and maintenance of aggregated subscriber performance data is OPTIONAL for all scopes of aggregation. However, an implementation should maintain at least one interval for the 'scope of aggregation' that contains all subscriber sessions maintained by the system.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable) GetEntityData

func (csubAggStatsIntTable *CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is CsubAggStatsPointType. Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType
	CsubAggStatsPointType interface{}

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPoint
	CsubAggStatsPoint interface{}

	// This attribute is a key. The type is SubSessionType. Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsSessionType
	CsubAggStatsSessionType interface{}

	// This attribute is a key. This object indicates the interval number
	// identifying the 15-minute measurement interval for which aggregated
	// subscriber session performance data was successfully collected by the
	// system.  The interval identified by the value '1' represents the most
	// recent 15-minute measurement interval, and the interval identified by the
	// value (n) represents the interval immediately preceding the interval
	// identified by the value (n-1). The type is interface{} with range: 1..96.
	CsubAggStatsIntNumber interface{}

	// This object indicates whether the data for the 15-minute measurement
	// interval is valid. The type is bool.
	CsubAggStatsIntValid interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' created during the 15-minute measurement interval.
	// The type is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsIntCreatedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that were in the PENDING state and terminated for
	// reasons other than disconnect during the 15-minute measurement interval.
	// The type is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsIntFailedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned to the UP state during the
	// 15-minute measurement interval. The type is interface{} with range:
	// 0..4294967295. Units are sessions.
	CsubAggStatsIntUpSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the
	// AUTHENTICATED state during the 15-minute measurement interval. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsIntAuthSessions interface{}

	// This object indicates the total number of subscriber sessions terminated
	// due to a disconnect event during the 15-minute measurement interval. The
	// type is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsIntDiscSessions interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry An entry contains the aggregated subscriber session performance data collected over a single 15-minute measurement interval within a 'scope of aggregation'. For further details regarding 'scope of aggregation', see the descriptive text associated with the csubAggStatsEntry.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsIntTable_CsubAggStatsIntEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry contains a set of aggregated statistics relating to those
	// subscriber sessions that fall into a 'scope of  aggregation'.   A 'scope of
	// aggregation' is the set of subscriber sessions  that meet specified
	// criteria.  For example, a 'scope of  aggregation' may be the set of all
	// PPPoE subscriber sessions  maintained by the system.  The following
	// criteria define the  'scope of aggregation':   1)  Aggregation Point type
	// Aggregation point type identifies the format of the
	// csubAggStatsPoint for this entry.   2)  Aggregation Point
	// 'Physical' Aggregation Point type case:          In a distributed system, a
	// 'node' represents a physical          entity capable of maintaining the
	// context representing          a subscriber session.           If the 'scope
	// of aggregation' specifies a physical          entity having an
	// entPhysicalClass of 'chassis', then          the set of subscriber sessions
	// in the 'scope of          aggregation' may contain the subscriber sessions
	// maintained by all          the nodes contained in the system.           If
	// the 'scope of aggregation' specifies a physical          entity having an
	// entPhysicalClass of 'module' (e.g., a          line card), then the set of
	// subscriber sessions in the          'scope of aggregation' may contain the
	// subscriber          sessions maintained by the nodes contained by the
	// module.           If the 'scope of aggregation' specifies a physical
	// entity having an entPhysicalClass of 'cpu', then the          set of
	// subscriber sessions in the 'scope of aggregation'          may contain the
	// subscriber sessions maintained by the node          running on that
	// processor.           Observe that a centralized system (i.e., a system
	// that essentially contains a single node) can only          support a 'scope
	// of aggregation' that specifies a          physical entity classified as a
	// 'chassis'.           If the scope of aggregation specifies 'interface',
	// then the scope is the set of subscriber sessions carried          by the
	// interface identified the ifIndex value          represented in the
	// csubAggStatsPoint value.   2)  Subscriber Session Type          If the
	// 'scope of aggregation' specifies the value 'all'          for the
	// subscriber session type, then the set of          subscriber sessions in
	// the 'scope of aggregation' may          contain all subscriber sessions,
	// regardless of type.           If the 'scope of aggregation' specifies a
	// value other          than 'all' for the subscriber session type, then the
	// set of subscriber sessions in the 'scope of aggregation may
	// contain only those subscriber sessions of the specified          type.
	// Implementation Guidance  =======================  A system MUST maintain a
	// set of statistics with a 'scope of  aggregation' that contains all
	// subscriber sessions maintained  by the system.  The system creates this
	// entry during the  initialization of the SNMP entity.   A system SHOULD
	// maintain a set of statistics for each 'scope of  aggregation' containing
	// subscriber sessions of each subscriber  session type the system is capable
	// of providing access.  If the  system supports these sets of statistics,
	// then it creates these  entries during the initialization of the SNMP
	// entity.   A system MAY maintain sets of node-specific statistics.  if the
	// system supports sets of node-specific statistics, then it  creates the
	// appropriate entries upon detection of a physical  entity (resulting from
	// system restart or insertion) containing  those nodes.  Likewise, the system
	// destroys these entries  upon removal of the physical entity. The type is
	// slice of CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry.
	CsubAggStatsEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable This table contains sets of aggregated statistics relating to subscriber sessions, where each set has a unique scope of aggregation.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable) GetEntityData

func (csubAggStatsTable *CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object indicates format of the
	// csubAggStatsPoint for this entry.   The format for the csubAggStatsPoint is
	// as follows:   csubAggStatsPointType      csubAggStatsPoint
	// ----------------------     ------------------      'physical'
	// PhysicalIndex      'interface'                InterfaceIndex. The type is
	// CsubAggStatsPointType.
	CsubAggStatsPointType interface{}

	// This attribute is a key. This object should be read with
	// csubAggStatsPointType always.  This object indicates one of the determining
	// factors affecting  the 'scope of aggregation' for the set of statistics
	// contained  by the row.   The value indicated by this object should be
	// interpreted as the  identifier for the point type specific base table.
	// For point types of 'physical', the type specific base table is  the
	// entPhysicalTable and this value is a PhysicalIndex.  For  point types of
	// 'interface', the type specific base table is  the ifTable and this value is
	// an InterfaceIndex.   If this column indicates a physical entity which has
	// an  entPhysicalClass of 'chassis', then the 'scope of aggregation'  may
	// includes those subscriber sessions maintained by all nodes  contained by
	// the system.   If this column indicates a physical entity which has an
	// entPhysicalClass of  'module' (e.g., a line card), then the  'scope of
	// aggregation' may include those subscriber sessions  maintained by the nodes
	// contained by the module.   If this column indicates a physical entity which
	// has an  entPhysicalClass of 'cpu', then the 'scope of aggregation' may
	// include those subscriber sessions maintained by the node  running on the
	// processor.   Aggregation points with entPhysicalTable / ifTable overlap:
	// For interfaces which map directly to physical 'port' class  entities in the
	// entPhysicalTable, the preferred representation  as aggregation points is
	// the 'physical' point type and  PhysicalIndex identifier. The type is
	// interface{} with range: 1..4294967295.
	CsubAggStatsPoint interface{}

	// This attribute is a key. This object indicates one of the determining
	// factors affecting the 'scope of aggregation' for the statistics contained
	// by the row.  If the value of this column is 'all', then the 'scope of
	// aggregation' may include all subscriber sessions, regardless of type.  If
	// the value of this column is not 'all', then the 'scope of aggregation' may
	// include subscriber sessions of the indicated subscriber session type. The
	// type is SubSessionType.
	CsubAggStatsSessionType interface{}

	// This object indicates the current number of subscriber sessions within the
	// 'scope of aggregation' that are in the PENDING state. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsPendingSessions interface{}

	// This object indicates the current number of subscriber sessions within the
	// 'scope of aggregation' that are in the UP state. The type is interface{}
	// with range: 0..4294967295. Units are sessions.
	CsubAggStatsUpSessions interface{}

	// This object indicates the current number of subscriber session within the
	// 'scope of aggregation' that have been authenticated. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsAuthSessions interface{}

	// This object indicates the current number of subscriber session within the
	// 'scope of aggregation' that have not been authenticated. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsUnAuthSessions interface{}

	// This object indicates the current number of subscriber sessions within the
	// 'scope of aggregation' that are less resource intensive. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsLightWeightSessions interface{}

	// This object indicates the current number of subscriber sessions within the
	// 'scope of aggregation' that are redundant (i.e.,  sessions with a
	// csubSessionRedundancyMode of 'standby'). The type is interface{} with
	// range: 0..4294967295. Units are sessions.
	CsubAggStatsRedSessions interface{}

	// This object indicates the highest number of subscriber sessions within the
	// 'scope of aggregation' observed simultaneously in the UP state since the
	// last discontinuity time. The type is interface{} with range: 0..4294967295.
	// Units are sessions.
	CsubAggStatsHighUpSessions interface{}

	// This object indicates the average time subscriber sessions within the
	// 'scope of aggregation' spent in the UP state.  The system calculates this
	// average over all subscriber sessions maintained by all nodes contained by
	// the 'scope of aggregation' since the last discontinuity time. The type is
	// interface{} with range: 0..4294967295. Units are seconds.
	CsubAggStatsAvgSessionUptime interface{}

	// This object indicates the average rate (per minute) at which the nodes
	// contained by the 'scope of aggregation' have established new subscriber
	// sessions. The type is interface{} with range: 0..4294967295. Units are
	// sessions per minute.
	CsubAggStatsAvgSessionRPM interface{}

	// This object indicates the average rate (per hour) at which the nodes
	// contained by the 'scope of aggregation' have established new subscriber
	// sessions. The type is interface{} with range: 0..4294967295. Units are
	// sessions per hour.
	CsubAggStatsAvgSessionRPH interface{}

	// This object indicates the number of times that nodes contained within the
	// 'scope of aggregation' have engaged the subscriber session throttle since
	// the last discontinuity time.  The mechanics of a subscriber session
	// throttle vary with subscriber session type and implementation.  However,
	// the general concept of the throttle prevents a node from having to deal
	// with more than a configured number of requests to establish subscriber
	// sessions from the same CPE within the a configured interval of time.  When
	// the number of requests exceeds the configured threshold within the
	// configured interval, then the node processing the requests engages the
	// throttle. Typically, when a node engages a throttle, it drops requests from
	// the CPE for some period of time, after which the node disengages the
	// throttle.  Discontinuities in the value of this counter can occur at
	// re-initialization of the management system, and at other times as indicated
	// by the value of csubAggStatsDiscontinuityTime. The type is interface{} with
	// range: 0..18446744073709551615. Units are engagements.
	CsubAggStatsThrottleEngagements interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' created since the discontinuity time.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// csubAggStatsDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalCreatedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that were in the PENDING state and terminated for
	// reasons other than disconnect since the last discontinuity time.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// csubAggStatsDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalFailedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned to the UP state since the last
	// discontinuity time.  Discontinuities in the value of this counter can occur
	// at re-initialization of the management system, and at other times as
	// indicated by the value of csubAggStatsDiscontinuityTime. The type is
	// interface{} with range: 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalUpSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the
	// AUTHENTICATED state since the last discontinuity time.  Discontinuities in
	// the value of this counter can occur at re-initialization of the management
	// system, and at other times as indicated by the value of
	// csubAggStatsDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalAuthSessions interface{}

	// This object indicates the total number of subscriber sessions terminated
	// due to a disconnect event since the last discontinuity time.
	// Discontinuities in the value of this counter can occur at re-initialization
	// of the management system, and at other times as indicated by the value of
	// csubAggStatsDiscontinuityTime. The type is interface{} with range:
	// 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalDiscSessions interface{}

	// This object indicates the total number of subscriber sessions that are less
	// resource intensive. The type is interface{} with range:
	// 0..18446744073709551615. Units are sessions.
	CsubAggStatsTotalLightWeightSessions interface{}

	// This object indicates the total number of differential traffic classes on
	// subscriber sessions. IP ACLs are used to create differential flows(Traffic
	// Classes).  Each Traffic Class can have a different set of features applied.
	// The type is interface{} with range: 0..18446744073709551615. Units are
	// sessions.
	CsubAggStatsTotalFlowsUp interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' created during the last 24 hours.  The system
	// calculates the value of this column by summing the values of all instances
	// of csubAggStatsIntCreatedSessions that expand this row and have a
	// corresponding csubAggStatsIntValid of 'true'. The type is interface{} with
	// range: 0..4294967295. Units are sessions.
	CsubAggStatsDayCreatedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that were in the PENDING state and terminated for
	// reasons other than disconnect during the last 24 hours.  The system
	// calculates the value of this column by summing the values of all instances
	// of csubAggStatsIntFailedSessions that expand this row and have a
	// corresponding csubAggStatsIntValid of 'true'. The type is interface{} with
	// range: 0..4294967295. Units are sessions.
	CsubAggStatsDayFailedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned to the UP state during the last 24
	// hours.  The system calculates the value of this column by summing the
	// values of all instances of csubAggStatsIntUpSessions that expand this row
	// and have a corresponding csubAggStatsIntValid of 'true'. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsDayUpSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the
	// AUTHENTICATED state during the last 24 hours.  The system calculates the
	// value of this column by summing the values of all instances of
	// csubAggStatsIntAuthSessions that expand this row and have a corresponding
	// csubAggStatsIntValid of 'true'. The type is interface{} with range:
	// 0..4294967295. Units are sessions.
	CsubAggStatsDayAuthSessions interface{}

	// This object indicates the total number of subscriber sessions terminated
	// due to a disconnect event during the last 24 hours.  The system calculates
	// the value of this column by summing the values of all instances of
	// csubAggStatsIntDiscSessions that expand this row and have a corresponding
	// csubAggStatsIntValid of 'true'. The type is interface{} with range:
	// 0..4294967295. Units are sessions.
	CsubAggStatsDayDiscSessions interface{}

	// This object indicates the time that has elapsed since the beginning of the
	// current 15-minute measurement interval.  If, for some reason, such as an
	// adjustment in the system's time-of-day clock, the current interval exceeds
	// the maximum value, then the value of this column will be the maximum value.
	// The type is interface{} with range: 0..899. Units are seconds.
	CsubAggStatsCurrTimeElapsed interface{}

	// This object indicates the number of intervals for which data was collected.
	// The value of this column will be '96' unless the measurement was started
	// (or restarted) within 1,440 minutes, in which case the value will be the
	// number of complete 15-minute intervals for which the system has at least
	// some data.  In certain cases it is possible that some intervals are
	// unavailable, in which case the value of this column will be maximum
	// interval number for which data is available. The type is interface{} with
	// range: 0..96. Units are intervals.
	CsubAggStatsCurrValidIntervals interface{}

	// This object indicates the number of intervals in the range from 0 to
	// csubCurrValidIntervals for which no data is available.  This object will
	// typically be '0' except in certain circumstances when some intervals are
	// unavailable. The type is interface{} with range: 0..96. Units are
	// intervals.
	CsubAggStatsCurrInvalidIntervals interface{}

	// This object indicates the current number of differential traffic classes on
	// subscriber sessions currently UP. IP ACLs are used to create differential
	// flows (Traffic Classes).Each Traffic Class can have a different set of
	// features applied. The type is interface{} with range: 0..96. Units are
	// intervals.
	CsubAggStatsCurrFlowsUp interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' created during the current 15-minute interval. The
	// type is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsCurrCreatedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that were in the PENDING state and terminated for
	// reasons other than disconnect during the current 15-minute interval. The
	// type is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsCurrFailedSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned to the UP state during the current
	// 15-minute interval. The type is interface{} with range: 0..4294967295.
	// Units are sessions.
	CsubAggStatsCurrUpSessions interface{}

	// This object indicates the total number of subscriber sessions within the
	// 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the
	// AUTHENTICATED state during the current 15-minute interval. The type is
	// interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsCurrAuthSessions interface{}

	// This object indicates the total number of subscriber sessions terminated
	// due to a disconnect event during the current 15-minute interval. The type
	// is interface{} with range: 0..4294967295. Units are sessions.
	CsubAggStatsCurrDiscSessions interface{}

	// The date and time (as determined by the system's clock) of the most recent
	// occurrence of an event affecting the  continuity of the aggregation
	// statistics for this aggregation  point. The type is string.
	CsubAggStatsDiscontinuityTime interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry An entry contains a set of aggregated statistics relating to those subscriber sessions that fall into a 'scope of aggregation'.

A 'scope of aggregation' is the set of subscriber sessions that meet specified criteria. For example, a 'scope of aggregation' may be the set of all PPPoE subscriber sessions maintained by the system. The following criteria define the 'scope of aggregation':

  1. Aggregation Point type Aggregation point type identifies the format of the csubAggStatsPoint for this entry.
  1. Aggregation Point 'Physical' Aggregation Point type case: In a distributed system, a 'node' represents a physical entity capable of maintaining the context representing a subscriber session.

    If the 'scope of aggregation' specifies a physical entity having an entPhysicalClass of 'chassis', then the set of subscriber sessions in the 'scope of aggregation' may contain the subscriber sessions maintained by all the nodes contained in the system.

    If the 'scope of aggregation' specifies a physical entity having an entPhysicalClass of 'module' (e.g., a line card), then the set of subscriber sessions in the 'scope of aggregation' may contain the subscriber sessions maintained by the nodes contained by the module.

    If the 'scope of aggregation' specifies a physical entity having an entPhysicalClass of 'cpu', then the set of subscriber sessions in the 'scope of aggregation' may contain the subscriber sessions maintained by the node running on that processor.

    Observe that a centralized system (i.e., a system that essentially contains a single node) can only support a 'scope of aggregation' that specifies a physical entity classified as a 'chassis'.

    If the scope of aggregation specifies 'interface', then the scope is the set of subscriber sessions carried by the interface identified the ifIndex value represented in the csubAggStatsPoint value.

  1. Subscriber Session Type If the 'scope of aggregation' specifies the value 'all' for the subscriber session type, then the set of subscriber sessions in the 'scope of aggregation' may contain all subscriber sessions, regardless of type.

    If the 'scope of aggregation' specifies a value other than 'all' for the subscriber session type, then the set of subscriber sessions in the 'scope of aggregation may contain only those subscriber sessions of the specified type.

Implementation Guidance ======================= A system MUST maintain a set of statistics with a 'scope of aggregation' that contains all subscriber sessions maintained by the system. The system creates this entry during the initialization of the SNMP entity.

A system SHOULD maintain a set of statistics for each 'scope of aggregation' containing subscriber sessions of each subscriber session type the system is capable of providing access. If the system supports these sets of statistics, then it creates these entries during the initialization of the SNMP entity.

A system MAY maintain sets of node-specific statistics. if the system supports sets of node-specific statistics, then it creates the appropriate entries upon detection of a physical entity (resulting from system restart or insertion) containing those nodes. Likewise, the system destroys these entries upon removal of the physical entity.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType string

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType represents 'interface' InterfaceIndex

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType_physical CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType = "physical"

	CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType_interface_ CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsTable_CsubAggStatsEntry_CsubAggStatsPointType = "interface"
)

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table exists for each row in the csubAggStatsTable. Each row
	// defines the set of thresholds and evaluation attributes for an aggregation
	// point. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry.
	CsubAggStatsThreshEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable Please enter the Table Description here.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable) GetEntityData

func (csubAggStatsThreshTable *CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This threshold, if non-zero, indicates the rising
	// threshold for the value of csubAggStatsUpSessions for the aggregation
	// point, When the current sample of csubAggStatsUpSessions is greater than or
	// equal to this threshold, and the value of csubAggStatsUpSessions for the
	// last sample interval was less than this thershold, the
	// csubSessionRisingNotif is triggered.           If the value of this
	// threshold is 0, the threshold is not evaluated. The type is interface{}
	// with range: 0..4294967295.
	CsubSessionRisingThresh interface{}

	// This threshold, if non-zero, indicates the falling threshold for the value
	// of csubAggStatsUpSessions for the aggregation point, When the current
	// sample of csubAggStatsUpSessions is less than or equal to this threshold,
	// and the value of csubAggStatsUpSessions for the last sample interval was
	// greater than this thershold, the csubSessionFallingNotif is triggered.
	// If the value of this threshold is 0, the threshold is not evaluated. The
	// type is interface{} with range: 0..4294967295.
	CsubSessionFallingThresh interface{}

	// This threshold, if non-zero, indicates the delta falling threshold as a
	// percentage of the value of csubAggStatsUpSessions for the aggregation
	// point, The delta as a percentage of csubAggStatsUpSessions (delta_percent)
	// is calculated as follows:       current value of csubAggStatsUpSessions =
	// value(n)              previous sampled value of csubAggStatsUpSessions =
	// value(n-1)               delta_percent = ((value(n-1) - value(n)) /
	// value(n-1)) * 100           If the delta_percent value of the current
	// evaluation interval is          greater than the value of this threshold, a
	// csubSessionDeltaPercentLossNotif is triggered.           If the value of
	// this threshold is 0, the threshold is not evaluated. The type is
	// interface{} with range: 0..100.
	CsubSessionDeltaPercentFallingThresh interface{}

	// The value of this object sets the number of seconds between samples for
	// threshold evaluation. For implementations capable of per-session event
	// evaluation of thresholds this object represents the maximum number of
	// seconds between samples. The type is interface{} with range: 0..900.
	CsubSessionThreshEvalInterval interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry A row in this table exists for each row in the csubAggStatsTable. Each row defines the set of thresholds and evaluation attributes for an aggregation point.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggStatsThreshTable_CsubAggStatsThreshEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh

type CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object enables or disables the generation of any of the csubAggStats*
	// threshold notifications. The type is bool.
	CsubAggStatsThreshNotifEnable interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh

func (*CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh) GetEntityData

func (csubAggThresh *CISCOSUBSCRIBERSESSIONMIB_CsubAggThresh) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJob

type CISCOSUBSCRIBERSESSIONMIB_CsubJob struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object specifies whether the system generates a csubJobFinishedNotify
	// notification when the system finishes processing a subscriber session job.
	// The type is bool.
	CsubJobFinishedNotifyEnable interface{}

	// This object indicates which subscriber session identities the system
	// maintains as searchable keys.  This value serves the EMS/NMS in configuring
	// a subscriber session query, as at least one match criteria must be an
	// 'indexed attribute'. The type is map[string]bool.
	CsubJobIndexedAttributes interface{}

	// This object indicates the next available identifier for the creation of a
	// new row in the csubJobTable.  If no available identifier exists, then this
	// object has the value '0'. The type is interface{} with range:
	// 0..4294967295.
	CsubJobIdNext interface{}

	// This object indicates the maximum number of outstanding subscriber session
	// jobs the system can support.  If the csubJobTable contains a number of rows
	// (i.e., the value of csubJobCount) equal to this value, then any attempt to
	// create a new row will result in a response with an error-status of
	// 'resourceUnavailable'. The type is interface{} with range: 1..4294967295.
	// Units are jobs.
	CsubJobMaxNumber interface{}

	// This object specifies the maximum life a subscriber session report
	// corresponding to a subscriber session job having a csubJobType of 'query'.
	// The system tracks the time elapsed after it finishes processing a query.
	// When the time elapsed reaches the value specified by this column, the
	// system automatically  destroys the report.  A value of '0' disables the
	// automatic destruction of reports. The type is interface{} with range:
	// 0..4294967295. Units are seconds.
	CsubJobMaxLife interface{}

	// This object indicates the number of subscriber session jobs currently
	// maintained by the csubJobTable. The type is interface{} with range:
	// 0..4294967295. Units are jobs.
	CsubJobCount interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJob

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJob) GetEntityData

func (csubJob *CISCOSUBSCRIBERSESSIONMIB_CsubJob) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable

type CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describes a set of subscriber session match criteria. The set
	// contains those subscriber session identities specified by
	// csubJobMatchIdentities.  If the corresponding row in the csubJobTable has a
	// csubJobType of 'query', then the system builds a report containing those
	// subscriber sessions matching these criteria.  If the corresponding row in
	// the csubJobTable has a csubJobType of 'clear', then the system terminates
	// those subscriber sessions matching these criteria.  The system
	// automatically creates an entry when the EMS/NMS sets the corresponding
	// instance of csubJobType to 'query' or 'clear'. Likewise, the system
	// automatically destroys an entry under the following circumstances:  1)  The
	// EMS/NMS destroys the corresponding row in the     csubJobTable.  2)  The
	// EMS/NMS sets the corresponding instance of csubJobType     to 'noop'. The
	// type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry.
	CsubJobMatchParamsEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable This table contains subscriber session job parameters describing match criteria.

This table has a sparse-dependent relationship on the csubJobTable, containing a row for each job having a csubJobType of 'query' or 'clear'.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable) GetEntityData

func (csubJobMatchParamsTable *CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobId
	CsubJobId interface{}

	// This object specifies the subscriber identities that the system uses to
	// determine the subscriber sessions the job executes on.  Each bit in this
	// bit string corresponds to one or more columns in this table.  If the bit is
	// '0', then the value of the corresponding columns are invalid.  If the bit
	// is '1', then the value of corresponding columns are valid.  The following
	// list specifies the mappings between the bits and the columns:
	// 'subscriberLabel' => csubJobMatchSubscriberLabel     'macAddress'      =>
	// csubJobMatchMacAddress     'nativeVrf'       => csubJobMatchNativeVrf
	// 'nativeIpAddress' => csubJobMatchNativeIpAddrType,
	// csubJobMatchNativeIpAddr,
	// csubJobMatchNativeIpMask,     'domainVrf'       => csubJobMatchDomainVrf
	// 'domainIpAddress' => csubJobMatchDomainIpAddrType,
	// csubJobMatchDomainIpAddr,                          csubJobMatchDomainIpMask
	// 'pbhk'            => csubJobMatchPbhk     'remoteId'        =>
	// csubJobMatchRemoteId     'circuitId'       => csubJobMatchCircuitId
	// 'nasPort'         => csubJobMatchNasPort     'domain'          =>
	// csubJobMatchDomain     'username'        => csubJobMatchUsername
	// 'acctSessionId'   => csubJobMatchAcctSessionId     'dnis'            =>
	// csubJobMatchDnis     'media'           => csubJobMatchMedia
	// 'mlpNegotiated'   => csubJobMatchMlpNegotiated     'protocol'        =>
	// csubJobMatchProtocol     'serviceName'     => csubJobMatchServiceName
	// 'dhcpClass'       => csubJobMatchDhcpClass     'tunnelName'      =>
	// csubJobMatchTunnelName  Observe that the bit 'ifIndex' has no meaning, as
	// subscriber session jobs do not match against this subscriber session
	// identity. The type is map[string]bool.
	CsubJobMatchIdentities interface{}

	// This object specifies other parameters relating to subscriber sessions a
	// subscriber session job may match against.  Each bit in this bit string
	// corresponds to a column in this table.  If the bit is '0', then the value
	// of the corresponding column is invalid.  If the bit is '1', then the value
	// of the corresponding column represents the value of the parameter identity
	// the system should match against for the corresponding subscriber session
	// job.  The following list specifies the mappings between bits and the
	// columns:      'danglingDuration' => csubJobMatchDanglingDuration
	// 'state'            => csubJobMatchState     'authenticated'    =>
	// csubJobMatchAuthenticated     'redundancyMode'   =>
	// csubJobMatchRedundancyMode. The type is map[string]bool.
	CsubJobMatchOtherParams interface{}

	// This object specifies the subscriber label that the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'subscriberLabel' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is interface{} with
	// range: 0..4294967295.
	CsubJobMatchSubscriberLabel interface{}

	// This object specifies the MAC address that the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'macAddress' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	CsubJobMatchMacAddress interface{}

	// This object specifies the native VRF the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'nativeVrf' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchNativeVrf interface{}

	// This object specifies the type of Internet address specified by
	// csubJobMatchNativeIpAddr and csubJobMatchNativeIpMask.  This value is valid
	// only if the 'nativeIpAddress' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is InetAddressType.
	CsubJobMatchNativeIpAddrType interface{}

	// This object specifies the native IP address that the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'nativeIpAddress' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is string with length:
	// 0..255.
	CsubJobMatchNativeIpAddr interface{}

	// This object specifies the mask used when matching the native IP address
	// against subscriber sessions in the process of executing a subscriber
	// session job.  This value is valid only if the 'nativeIpAddress' bit of the
	// corresponding instance of csubJobMatchIdentities is '1'. The type is string
	// with length: 0..255.
	CsubJobMatchNativeIpMask interface{}

	// This object specifies the domain VRF the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'domainVrf' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchDomainVrf interface{}

	// This object specifies the type of Internet address specified by
	// csubJobMatchDomainIpAddr and csubJobMatchDomainIpMask.  This value is valid
	// only if the 'domainIpAddress' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is InetAddressType.
	CsubJobMatchDomainIpAddrType interface{}

	// This object specifies the domain IP address that the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'domainIpAddress' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is string with length:
	// 0..255.
	CsubJobMatchDomainIpAddr interface{}

	// This object specifies the mask used when matching the domain IP address
	// against subscriber sessions in the process of executing a subscriber
	// session job.  This value is valid only if the 'domainIpAddress' bit of the
	// corresponding instance of csubJobMatchIdentities is '1'. The type is string
	// with length: 0..255.
	CsubJobMatchDomainIpMask interface{}

	// This object specifies the PBHK that the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'pbhk' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchPbhk interface{}

	// This object specifies the Remote-Id the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'remoteId' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchRemoteId interface{}

	// This object specifies the Circuit-Id the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'circuitId' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchCircuitId interface{}

	// This object specifies the NAS port-identifier the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'nasPort' bit of the corresponding instance
	// of csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchNasPort interface{}

	// This object specifies the domain the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'domain' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchDomain interface{}

	// This object specifies the username the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'username' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchUsername interface{}

	// This object specifies the accounting session identifier the system matches
	// against subscriber sessions in the process of executing a subscriber
	// session job.  This value is valid only if the 'accountingSid' bit of the
	// corresponding instance of csubJobMatchIdentities is '1'. The type is
	// interface{} with range: 0..4294967295.
	CsubJobMatchAcctSessionId interface{}

	// This object specifies the DNIS number the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'dnis' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchDnis interface{}

	// This object specifies the media type the system matches against subscriber
	// sessions in the process of executing a subscriber session job.  This value
	// is valid only if the 'media' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is SubscriberMediaType.
	CsubJobMatchMedia interface{}

	// This object specifies the MLP negotiated flag the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'mlpNegotiated' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is bool.
	CsubJobMatchMlpNegotiated interface{}

	// This object specifies the protocol type the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'protocol' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is
	// SubscriberProtocolType.
	CsubJobMatchProtocol interface{}

	// This object specifies the service name the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'serviceName' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchServiceName interface{}

	// This object specifies the DHCP class name the system matches against
	// subscriber sessions in the process of executing a subscriber session job.
	// This value is valid only if the 'dhcpClass' bit of the corresponding
	// instance of csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchDhcpClass interface{}

	// This object specifies the tunnel name the system matches against subscriber
	// session in the process of executing a subscriber session job.  This value
	// is valid only if the 'tunnelName' bit of the corresponding instance of
	// csubJobMatchIdentities is '1'. The type is string.
	CsubJobMatchTunnelName interface{}

	// This object specifies the minimum interval of time a subscriber session can
	// remain dangling in order for the system to consider it a match in the
	// process of executing a subscriber session job. A 'dangling' subscriber
	// session is one in the PENDING state.  The value '0' cannot be written to an
	// instance of this object. However, it serves as a convenient value when the
	// column is not valid.  This value is valid only if the 'danglingDuration'
	// bit of the corresponding instance of csubJobMatchOtherParams is '1'. The
	// type is interface{} with range: 0..3600.
	CsubJobMatchDanglingDuration interface{}

	// This object specifies the state of a subscriber session in order for the
	// system to consider a match in the process of executing a subscriber session
	// job.  The value 'other' is not valid and an implementation should not allow
	// it to be written to this column.  This value is valid only if the 'state'
	// bit of the corresponding instance of csubJobMatchOtherParams is '1'. The
	// type is SubSessionState.
	CsubJobMatchState interface{}

	// This object specifies whether a subscriber session should be
	// unauthenticated for the system to consider a match in the process of
	// executing a subscriber session job.  If this column is 'false', then the
	// subscriber session job matches subscriber sessions that are
	// unauthenticated.  If this column is 'true', then the subscriber session job
	// matches subscriber session that are authenticated.  This value is valid
	// only if the 'authenticated' bit of the corresponding instance of
	// csubJobMatchParams is '1'. The type is bool.
	CsubJobMatchAuthenticated interface{}

	// This object specifies the redudancy mode of the subscriber session in order
	// for the system to consider a match in the process of executing a subscriber
	// session job.  The value 'other' is not valid and an implementation should
	// not allow it to be written to this column.  This value is valid only if the
	// 'redundancyMode' bit of the corresponding instance of
	// csubJobMatchOtherParams is '1'. The type is SubSessionRedundancyMode.
	CsubJobMatchRedundancyMode interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry An entry describes a set of subscriber session match criteria. The set contains those subscriber session identities specified by csubJobMatchIdentities.

If the corresponding row in the csubJobTable has a csubJobType of 'query', then the system builds a report containing those subscriber sessions matching these criteria.

If the corresponding row in the csubJobTable has a csubJobType of 'clear', then the system terminates those subscriber sessions matching these criteria.

The system automatically creates an entry when the EMS/NMS sets the corresponding instance of csubJobType to 'query' or 'clear'. Likewise, the system automatically destroys an entry under the following circumstances:

  1. The EMS/NMS destroys the corresponding row in the csubJobTable.
  1. The EMS/NMS sets the corresponding instance of csubJobType to 'noop'.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobMatchParamsTable_CsubJobMatchParamsEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describes a set of subscriber session query parameters.  The
	// system automatically creates an entry when the EMS/NMS sets the
	// corresponding instance of csubJobType to 'query'.  Likewise, the system
	// automatically destroys an entry under the following circumstances:  1)  The
	// EMS/NMS destroys the corresponding row in the csubJobTable.  2)  The
	// EMS/NMS sets the corresponding instance of csubJobType to     'noop' or
	// 'clear'. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry.
	CsubJobQueryParamsEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable This table contains subscriber session job parameters describing query parameters.

This table has a sparse-dependent relationship on the csubJobTable, containing a row for each job having a csubJobType of 'query'.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable) GetEntityData

func (csubJobQueryParamsTable *CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobId
	CsubJobId interface{}

	// This object specifies the first subscriber identity that the system uses
	// when sorting subscriber sessions into the final report corresponding to a
	// subscriber session query.  It is not valid to set this column to 'other' or
	// 'ifIndex'. The type is SubSessionIdentity.
	CsubJobQuerySortKey1 interface{}

	// This object specifies the second subscriber identity that the system uses
	// when sorting subscriber sessions into the final report corresponding to a
	// subscriber session query.  If it is the desire to have the final report
	// sorted on a single subscriber identity, then this column should be 'other'.
	// The type is SubSessionIdentity.
	CsubJobQuerySortKey2 interface{}

	// This object specifies the third subscriber identity that the system uses
	// when sorting subscriber sessions into the final report corresponding to a
	// subscriber session query.  If it is the desire to have the final report
	// sorted on one or two subscriber identities, then this column should be
	// 'other'. The type is SubSessionIdentity.
	CsubJobQuerySortKey3 interface{}

	// This object indicates the number of subscriber sessions that matched the
	// corresponding subscriber session query.  The value of this column should be
	// '0' unless the corresponding value of csubJobState is 'finished'.  The
	// value of this column should be '0' after the EMS/NMS sets the corresponding
	// csubJobControl to 'release'. The type is interface{} with range:
	// 0..4294967295.
	CsubJobQueryResultingReportSize interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry An entry describes a set of subscriber session query parameters.

The system automatically creates an entry when the EMS/NMS sets the corresponding instance of csubJobType to 'query'. Likewise, the system automatically destroys an entry under the following circumstances:

1) The EMS/NMS destroys the corresponding row in the csubJobTable.

  1. The EMS/NMS sets the corresponding instance of csubJobType to 'noop' or 'clear'.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueryParamsTable_CsubJobQueryParamsEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describing an subscriber session job in the subscriber session job
	// queue.  The system creates an entry in this table when it places a
	// subscriber session job on the subscriber session job queue.  It does this
	// when the EMS/NMS sets an instance of csubJobControl to 'start' and the
	// system is already executing a subscriber session job.  Likewise, the system
	// destroys an entry when it removes it from the queue.  This occurs under the
	// following circumstances:  1)  The system has finished executing a job, for
	// whatever     reason, and is ready to start executing the job at the head
	// of the queue.  2)  The EMS/NMS has set an instance of csubJobControl to
	// 'abort'     for a job that was on the queue. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry.
	CsubJobQueueEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable This table lists the subscriber session jobs currently pending in the subscriber session job queue.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable) GetEntityData

func (csubJobQueueTable *CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object indicates an positive, integer-value
	// that uniquely identifies the entry in the table. The value of this object
	// starts at '1' and monotonically increases for each subscriber session job
	// inserted into the subscriber session job queue.  If the value of this
	// object is '4294967295', the system will reset it to '1' when it inserts the
	// next subscriber session job into the subscriber session job queue. The type
	// is interface{} with range: 1..4294967295.
	CsubJobQueueNumber interface{}

	// This object indicates the identifier associated with the subscriber session
	// job. The type is interface{} with range: 1..4294967295.
	CsubJobQueueJobId interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry An entry describing an subscriber session job in the subscriber session job queue.

The system creates an entry in this table when it places a subscriber session job on the subscriber session job queue. It does this when the EMS/NMS sets an instance of csubJobControl to 'start' and the system is already executing a subscriber session job. Likewise, the system destroys an entry when it removes it from the queue. This occurs under the following circumstances:

  1. The system has finished executing a job, for whatever reason, and is ready to start executing the job at the head of the queue.
  1. The EMS/NMS has set an instance of csubJobControl to 'abort' for a job that was on the queue.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobQueueTable_CsubJobQueueEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable

type CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describes a subscriber session that satisfied the match criteria
	// specified by the corresponding job.  The system creates an entry for each
	// subscriber session that satisfied the specified match criteria of a
	// subscriber session job having a csubJobType of 'query'.  However, it does
	// not create these entries until after the system has successfully executed
	// the subscriber session job.  The system destroys an entry under the
	// following circumstances:  1)  The corresponding subscriber session job has
	// been destroyed     by the EMS/NMS.  2)  The value of csubJobMaxLife is
	// non-zero and the age of the     report has reached the specified maximum
	// life.  3)  The EMS/NMS has set the corresponding instance of
	// csubJobControl to 'release'.  4)  The EMS/NMS has restarted the
	// corresponding subscriber     session job (i.e., has set the corresponding
	// instance of     csubJobControl to 'start'). The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry.
	CsubJobReportEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable This table contains the reports corresponding to subscriber session jobs that have a csubJobType of 'query' and csubJobState of 'finished'.

This table has an expansion dependent relationship on the csubJobTable, containing zero or more rows for each job.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable) GetEntityData

func (csubJobReportTable *CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_subscriber_session_mib.CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobId
	CsubJobId interface{}

	// This attribute is a key. This object indicates an arbitrary, positive,
	// integer-value that uniquely identifies this entry in a report.  This
	// auxiliary value is necessary, as the corresponding subscriber session job
	// can specify up to three subscriber identities on which to sort the
	// subscriber sessions that end up in the final report. The type is
	// interface{} with range: 1..4294967295.
	CsubJobReportId interface{}

	// This object indicates the ifIndex-value assigned to the subscriber session
	// that satisfied the match criteria specified by the corresponding subscriber
	// session job having a csubJobType of 'query'. The type is interface{} with
	// range: 1..2147483647.
	CsubJobReportSession interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry An entry describes a subscriber session that satisfied the match criteria specified by the corresponding job.

The system creates an entry for each subscriber session that satisfied the specified match criteria of a subscriber session job having a csubJobType of 'query'. However, it does not create these entries until after the system has successfully executed the subscriber session job.

The system destroys an entry under the following circumstances:

  1. The corresponding subscriber session job has been destroyed by the EMS/NMS.
  1. The value of csubJobMaxLife is non-zero and the age of the report has reached the specified maximum life.
  1. The EMS/NMS has set the corresponding instance of csubJobControl to 'release'.
  1. The EMS/NMS has restarted the corresponding subscriber session job (i.e., has set the corresponding instance of csubJobControl to 'start').

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobReportTable_CsubJobReportEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describing a subscriber session job.  At this time, subscriber
	// session jobs can perform one of two tasks:  - Subscriber Session Query
	// This type of job invokes the report generator, which builds     a list of
	// subscriber sessions matching criteria specified by     the corresponding
	// row in the csubJobMatchParamsTable.  The     list built by the report
	// generator must conform to     parameters specified by the corresponding row
	// in     csubJobQueryParamsTable, which at this time only affects     sorting
	// order.  - Subscriber Session Clear     This type of job causes the system
	// to terminate those     subscriber sessions matching criteria specified by
	// the     corresponding row in the csubJobMatchParamsTable.  The following
	// procedure summarizes how the EMS/NMS can start and monitor a subscriber
	// session job:  1)  The EMS/NMS must start by reading csubJobIdNext.  If it
	// is     zero, continue polling csubJobIdNext until it is non-zero.  2)  The
	// EMS/NMS creates a row in the csubJobTable using the     instance identifier
	// retrieved in the last step.  Since every     object contained by the entry
	// with a MAX-ACCESS of      'read-create' specifies a default value, it makes
	// little     difference whether the EMS/NMS employs create-and-wait or
	// create-and-go semantics.  3)  The EMS/NMS sets the type of subscriber
	// session job by     setting the corresponding instance of csubJobType.  4a)
	// If the job is a 'query', then the EMS/NMS must configure     the query
	// before starting it by setting columns contained     by the corresponding
	// rows in the csubJobMatchParamsTable and     csubJobQueryParamsTable.  4b)
	// If job is a 'clear', then the EMS/NMS must configure     the job before
	// starting it by setting columns contained by     the corresponding row in
	// the csubJobMatchParamsTable.  5)  The EMS/NMS can now start the job by
	// setting the      corresponding instance of csubJobControl to 'start'.  6)
	// The EMS/NMS can monitor the progress of the job by polling     the
	// corresponding instance of csubJobState.  It can also     wait for a
	// csubJobFinishedNotify notification.  When the     state of the job
	// transitions to 'finished', then the system     has finished executing the
	// job.  7)  The EMS/NMS can determine the final status of the job by
	// reading the corresponding instance of csubJobFinishedReason.     If job is
	// a 'query' and the corresponding instance of     csubJobFinishedReason is
	// 'normal', then the EMS/NMS can     safely read the report by retrieving the
	// corresponding     rows from the csubJobReportTable.  8a) After a job has
	// finished, the EMS/NMS has the option of     destroying it.  It can do this
	// by simply setting the     corresponding instance of  csubJobStatus to
	// 'destroy'.     Alternatively, the EMS/NMS may retain the job and execute it
	// again in the future (by returning to step 5).  Additionally,     nothing
	// would prevent the EMS/NMS from changing the job's     type, which causes
	// the automatic destruction of the     corresponding report.  8b) If the job
	// is a 'query' and the EMS/NMS opts to retain the     job, then it may
	// consider releasing the corresponding report     after reading it.  It can
	// do this by setting the     corresponding instance of csubJobControl to
	// 'release'. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry.
	CsubJobEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable This table contains the subscriber session jobs submitted by the EMS/NMS.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobTable) GetEntityData

func (csubJobTable *CISCOSUBSCRIBERSESSIONMIB_CsubJobTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object indicates an arbitrary, positive
	// integer-value uniquely identifying the subscriber session job. The type is
	// interface{} with range: 1..4294967295.
	CsubJobId interface{}

	// This object specifies the status of the subscriber session job.  The
	// following columns must be valid before activating a subscriber session job:
	// - csubJobStorage     - csubJobType     - csubJobControl  However, these
	// objects specify a default value.  Thus, it is possible to use create-and-go
	// semantics without setting any additional columns.  An implementation must
	// allow the EMS/NMS to modify any column when this column is 'active',
	// including columns defined in tables that have a one-to-one or sparse
	// dependent relationship on this table. The type is RowStatus.
	CsubJobStatus interface{}

	// This object specifies what happens to the subscriber session job upon
	// restart. The type is StorageType.
	CsubJobStorage interface{}

	// This object specifies the type of subscriber session job:  'noop'     This
	// type of job does nothing and simply serves as a     convenient default
	// value for newly created jobs, thereby     allowing create-and-go row
	// creation without having to     specify the type of job.  'query'     This
	// type of job starts a subscriber session query.  The     system searches for
	// any subscriber sessions matching the     configured criteria and sorts them
	// into a resulting     report.      Upon activation of a subscriber session
	// with this value,     the system automatically creates corresponding rows in
	// the csubJobMatchParamsTable and csubQueryParamsTable.  'clear'     This
	// type of job causes the system to terminated all     subscriber sessions
	// matching configured criteria.      Upon activation of a subscriber session
	// with this value,     the system automatically creates a corresponding row
	// in     the csubJobMatchParamsTable. The type is CsubJobType.
	CsubJobType interface{}

	// This object specifies an action relating to the subscriber session job:
	// 'noop'         This action does nothing.      'start'         If the
	// corresponding instance of csubJobType is 'noop',         then this action
	// simply causes the system to set the         corresponding instances of
	// csubJobState and         csubJobFinishedReason to 'finished' and 'normal',
	// respectively.          If the corresponding instance of csubJobType is not
	// 'noop' and the system is not executing a subscriber         session job,
	// then this action causes the system         immediately execute the
	// subscriber session job.          If the corresponding instance of
	// csubJobType is not         'noop' and the system is already executing a
	// subscriber         session job, then this action causes the system to put
	// the job on the subscriber session job queue.      'abort'         If the
	// subscriber session job is in the subscriber         session job queue, then
	// this action causes the system to         remove the job from the queue.
	// If the system is executing the subscriber session job,         then this
	// action causes the system to stop the job.      'release'         This
	// action causes the system to destroy any         corresponding rows in the
	// csubJobReportTable.          The system only accepts this action for a
	// previously         executed subscriber session job having a corresponding
	// instance of csubJobType set to 'query'.  Any attempt to         issue this
	// action under other circumstances will result         in a response
	// indicating an  error-status of         'inconsistentValue'.  When read,
	// this column is always 'noop'. The type is CsubJobControl.
	CsubJobControl interface{}

	// This object indicates the current state of the subscriber session job:
	// 'idle'         This state indicates that the system has not executed
	// the subscriber session job since it was created.      'pending'
	// This state indicates that the subscriber session job is         waiting in
	// the subscriber session job queue.      'inProgress'         This state
	// indicates that the system is executing the         subscriber session job.
	// Observe that the system may         execute more than one subscriber
	// session job at a time.      'finished'         This state indicates that
	// the system has executed the         subscriber session job and it has
	// finished.  The         corresponding instance of csubJobFinishedReason
	// indicates further details regarding the reason why the         job
	// finished. The type is CsubJobState.
	CsubJobState interface{}

	// This object indicates the value of sysUpTime when the system started
	// executing the subscriber session job.  This value will be '0' when the
	// corresponding instance of csubJobState is 'idle' or 'pending'. The type is
	// interface{} with range: 0..4294967295.
	CsubJobStartedTime interface{}

	// This object indicates the value of sysUpTime when the system finished
	// executing the subscriber session job, for whatever reason.  This value will
	// be '0' when the corresponding instance of csubJobState is 'idle',
	// 'pending', or 'inProgress'. The type is interface{} with range:
	// 0..4294967295.
	CsubJobFinishedTime interface{}

	// This object indicates the reason why the system finished executing the
	// subscriber session job:      'invalid'         Indicates that the
	// corresponding instance of         csubJobState is either 'idle', 'pending',
	// or         'inProgress'.      'other'         Indicates that the system
	// finished executing the         subscriber session job abnormally for a
	// reason not         recognized by this MIB module.      'normal'
	// Indicates that the system finished executing the         subscriber session
	// job with no problems.      'aborted'         Indicates that the system
	// finished executing the         subscriber session job as the result of the
	// EMS/NMS         writing 'abort' to the corresponding instance of
	// csubJobControl.      'insufficientResources'         Indicates that the
	// system finished executing the         subscriber session job abnormally due
	// to insufficient         resources to continue.      'error'
	// Indicates that the system encountered an error that         prevented it
	// from completing the job. The type is CsubJobFinishedReason.
	CsubJobFinishedReason interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry An entry describing a subscriber session job. At this time, subscriber session jobs can perform one of two tasks:

  • Subscriber Session Query This type of job invokes the report generator, which builds a list of subscriber sessions matching criteria specified by the corresponding row in the csubJobMatchParamsTable. The list built by the report generator must conform to parameters specified by the corresponding row in csubJobQueryParamsTable, which at this time only affects sorting order.
  • Subscriber Session Clear This type of job causes the system to terminate those subscriber sessions matching criteria specified by the corresponding row in the csubJobMatchParamsTable.

The following procedure summarizes how the EMS/NMS can start and monitor a subscriber session job:

  1. The EMS/NMS must start by reading csubJobIdNext. If it is zero, continue polling csubJobIdNext until it is non-zero.
  1. The EMS/NMS creates a row in the csubJobTable using the instance identifier retrieved in the last step. Since every object contained by the entry with a MAX-ACCESS of 'read-create' specifies a default value, it makes little difference whether the EMS/NMS employs create-and-wait or create-and-go semantics.
  1. The EMS/NMS sets the type of subscriber session job by setting the corresponding instance of csubJobType.

4a) If the job is a 'query', then the EMS/NMS must configure

the query before starting it by setting columns contained
by the corresponding rows in the csubJobMatchParamsTable and
csubJobQueryParamsTable.

4b) If job is a 'clear', then the EMS/NMS must configure

the job before starting it by setting columns contained by
the corresponding row in the csubJobMatchParamsTable.
  1. The EMS/NMS can now start the job by setting the corresponding instance of csubJobControl to 'start'.
  1. The EMS/NMS can monitor the progress of the job by polling the corresponding instance of csubJobState. It can also wait for a csubJobFinishedNotify notification. When the state of the job transitions to 'finished', then the system has finished executing the job.
  1. The EMS/NMS can determine the final status of the job by reading the corresponding instance of csubJobFinishedReason. If job is a 'query' and the corresponding instance of csubJobFinishedReason is 'normal', then the EMS/NMS can safely read the report by retrieving the corresponding rows from the csubJobReportTable.

8a) After a job has finished, the EMS/NMS has the option of

destroying it.  It can do this by simply setting the
corresponding instance of  csubJobStatus to 'destroy'.
Alternatively, the EMS/NMS may retain the job and execute it
again in the future (by returning to step 5).  Additionally,
nothing would prevent the EMS/NMS from changing the job's
type, which causes the automatic destruction of the
corresponding report.

8b) If the job is a 'query' and the EMS/NMS opts to retain the

job, then it may consider releasing the corresponding report
after reading it.  It can do this by setting the
corresponding instance of csubJobControl to 'release'.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl string

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl represents When read, this column is always 'noop'.

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl_noop CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl = "noop"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl_start CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl = "start"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl_abort CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl = "abort"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl_release CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobControl = "release"
)

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason string

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason represents prevented it from completing the job.

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_invalid CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "invalid"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_other CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "other"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_normal CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "normal"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_aborted CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "aborted"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_insufficientResources CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "insufficientResources"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason_error_ CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobFinishedReason = "error"
)

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState string

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState represents job finished.

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState_idle CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState = "idle"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState_pending CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState = "pending"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState_inProgress CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState = "inProgress"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState_finished CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobState = "finished"
)

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType

type CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType string

CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType represents the csubJobMatchParamsTable.

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType_noop CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType = "noop"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType_query CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType = "query"

	CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType_clear CISCOSUBSCRIBERSESSIONMIB_CsubJobTable_CsubJobEntry_CsubJobType = "clear"
)

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This entry identifies a subscriber session.  An entry exists for a
	// corresponding entry in the ifTable describing a subscriber session.
	// Currently, subscriber sessions must have one of the following ifType
	// values:      'ppp'     'ipSubscriberSession'     'l2SubscriberSession'  The
	// system creates an entry when it establishes a subscriber session.
	// Likewise, the system destroys an entry when it terminates the corresponding
	// subscriber session. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry.
	CsubSessionByTypeEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable This table describes a list of subscriber sessions currently maintained by the system. The tables sorts the subscriber sessions first by the subscriber session's type and second by the ifIndex assigned to the subscriber session.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable) GetEntityData

func (csubSessionByTypeTable *CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object indicates the type of the subscriber
	// session. The type is SubSessionType.
	CsubSessionByType interface{}

	// This attribute is a key. This object indicates the ifIndex assigned to the
	// subscriber session. The type is interface{} with range: 1..2147483647.
	CsubSessionIfIndex interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry This entry identifies a subscriber session.

An entry exists for a corresponding entry in the ifTable describing a subscriber session. Currently, subscriber sessions must have one of the following ifType values:

'ppp'
'ipSubscriberSession'
'l2SubscriberSession'

The system creates an entry when it establishes a subscriber session. Likewise, the system destroys an entry when it terminates the corresponding subscriber session.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubSessionByTypeTable_CsubSessionByTypeEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This entry contains data describing a subscriber sessions, including its
	// state, configuration, and collected identities.  An entry exists for a
	// corresponding entry in the ifTable describing a subscriber session.
	// Currently, subscriber sessions must have one of the following ifType
	// values:      'ppp'     'ipSubscriberSession'     'l2SubscriberSession'  The
	// system creates an entry when it establishes a subscriber session.
	// Likewise, the system destroys an entry when it terminates the corresponding
	// subscriber session. The type is slice of
	// CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry.
	CsubSessionEntry []*CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry
}

CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable This table describes a list of subscriber sessions currently maintained by the system.

This table has a sparse dependent relationship on the ifTable, containing a row for each interface having an interface type describing a subscriber session.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable) GetEntityData

func (csubSessionTable *CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable) GetEntityData() *types.CommonEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to if_mib.IFMIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// This object indicates the type of subscriber session. The type is
	// SubSessionType.
	CsubSessionType interface{}

	// This object indicates how the system assigns IP addresses to the
	// subscriber:      'none'         The system does not an involvement in (or
	// is it aware         of) the assignment an subscriber IP addresses.  For
	// example, a system does not have an involvement in the         assignment of
	// subscriber IP addresses for IP interface         subscriber sessions.
	// 'other'         The system assigns subscriber IP addresses using a
	// method not recognized by this MIB module.      'static'         Subscriber
	// IP addresses have been configured correctly         for the service domain.
	// The system does not have an         involvement in the assignment of the IP
	// address.      'localPool'         The system assigns subscriber IP
	// addresses from a         locally configured pool of IP addresses.
	// 'dhcpv4'         The system assigns subscriber IP addresses are using the
	// DHCPv4.      'dhcpv6'         The system assigns subscriber IP addresses
	// using the         DHCPv6.      'userProfileIpAddr'         The system
	// assigns subscriber IP addresses from a user         profile.
	// 'userProfileIpSubnet'         The system assigns the subscriber an IP
	// subnet from a         user profile.      'userProfileNamedPool'         The
	// system assigns subscriber IP addresses from a         locally configured
	// named pool specified by a user         profile. The type is
	// CsubSessionIpAddrAssignment.
	CsubSessionIpAddrAssignment interface{}

	// This object indicates the operational state of the subscriber session. The
	// type is SubSessionState.
	CsubSessionState interface{}

	// This object indicates whether the system has successfully authenticated the
	// subscriber session.      'false'         The subscriber session is
	// operationally up, but in the         UNAUTHENTICATED state.      'true'
	// The subscriber session is operationally up, but in the
	// AUTHENTICATED state. The type is bool.
	CsubSessionAuthenticated interface{}

	// This object indicates the redundancy mode in which the subscriber session
	// is operating. The type is SubSessionRedundancyMode.
	CsubSessionRedundancyMode interface{}

	// This object indicates when the subscriber session was created (i.e., when
	// the subscriber session was initiated). The type is string.
	CsubSessionCreationTime interface{}

	// This object indicates the row in the cdtTemplateTable (defined by the
	// CISCO-DYNAMIC-TEMPLATE-MIB) describing the derived configuration for the
	// subscriber session.  Observe that the value of cdtTemplateType
	// corresponding to the referenced row must be 'derived'. The type is string
	// with length: 1..64.
	CsubSessionDerivedCfg interface{}

	// This object indicates the subscriber identities that the system has
	// successfully collected for the subscriber session.  Each bit in this bit
	// string corresponds to a column in this table.  If the bit is '0', then the
	// value of the corresponding column is invalid.  If the bit is '1', then the
	// value of the corresponding column represents the value of the subscriber
	// identity collected by the system.  The following list specifies the
	// mappings between the bits and the columns:      'subscriberLabel' =>
	// csubSessionSubscriberLabel     'macAddress'      => csubSessionMacAddress
	// 'nativeVrf'       => csubSessionNativeVrf     'nativeIpAddress' =>
	// csubSessionNativeIpAddrType,
	// csubSessionNativeIpAddr,                          csubSessionNativeIpMask
	// 'nativeIpAddress2'=> csubSessionNativeIpAddrType2,
	// csubSessionNativeIpAddr2,                          csubSessionNativeIpMask2
	// 'domainVrf'       => csubSessionDomainVrf     'domainIpAddress' =>
	// csubSessionDomainIpAddrType,
	// csubSessionDomainIpAddr,                          csubSessionDomainIpMask
	// 'pbhk'            => csubSessionPbhk     'remoteId'        =>
	// csubSessionRemoteId     'circuitId'       => csubSessionCircuitId
	// 'nasPort'         => csubSessionNasPort     'domain'          =>
	// csubSessionDomain     'username'        => csubSessionUsername
	// 'acctSessionId'   => csubSessionAcctSessionId     'dnis'            =>
	// csubSessionDnis     'media'           => csubSessionMedia
	// 'mlpNegotiated'   => csubSessionMlpNegotiated     'protocol'        =>
	// csubSessionProtocol     'dhcpClass'       => csubSessionDhcpClass
	// 'tunnelName'      => csubSessionTunnelName  Observe that the bit 'ifIndex'
	// should always be '1'.  This identity maps to the ifIndex assigned to the
	// subscriber session.  Observe that the bit 'serviceName' maps to one or more
	// instance of ccbptPolicyMap (defined by the CISCO-CBP-TARGET-MIB). The type
	// is map[string]bool.
	CsubSessionAvailableIdentities interface{}

	// This object indicates a positive integer-value uniquely identifying the
	// subscriber session within the scope of the system.  This column is valid
	// only if the 'subscriberLabel' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is interface{} with range:
	// 0..4294967295.
	CsubSessionSubscriberLabel interface{}

	// This object indicates the MAC address of the subscriber.  This column is
	// valid only if the 'macAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	CsubSessionMacAddress interface{}

	// This object indicates the VRF originating the subscriber session.  This
	// column is valid only if the 'nativeVrf' bit of the corresponding instance
	// of csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionNativeVrf interface{}

	// This object indicates the type of IP address assigned to the subscriber on
	// the customer-facing side of the system.  This column is valid only if the
	// 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is InetAddressType.
	CsubSessionNativeIpAddrType interface{}

	// This object indicates the IP address assigned to the subscriber on the
	// customer-facing side of the system.  This column is valid only if the
	// 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionNativeIpAddr interface{}

	// This object indicates the corresponding mask for the IP address assigned to
	// the subscriber on the customer-facing side of the system.  This column is
	// valid only if the 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionNativeIpMask interface{}

	// This object indicates the VRF to which the system transfers the subscriber
	// session's traffic.  This column is valid only if the 'domainVrf' bit of the
	// corresponding instance of csubSessionAvailableIdentities is '1'. The type
	// is string.
	CsubSessionDomainVrf interface{}

	// This object indicates the type of IP address assigned to the subscriber on
	// the service-facing side of the system.  This column is valid only if the
	// 'domainIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is InetAddressType.
	CsubSessionDomainIpAddrType interface{}

	// This object indicates the IP address assigned to the subscriber on the
	// service-facing side of the system.  This column is valid only if the
	// 'domainIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionDomainIpAddr interface{}

	// This object indicates the corresponding mask for the IP address assigned to
	// the subscriber on the service-facing side of the system.  This column is
	// valid only if the 'domainIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionDomainIpMask interface{}

	// This object indicates the PBHK identifying the subscriber.  This column is
	// valid only if the 'pbhk' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionPbhk interface{}

	// This object indicates the Remote-Id identifying the 'calling station' or AN
	// supporting the circuit that provides access to the subscriber.  This column
	// is valid only if the 'remoteId' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionRemoteId interface{}

	// This object indicates the Circuit-Id identifying the circuit supported by
	// the 'calling station' or AN providing access to the subscriber.  This
	// column is valid only if the 'circuitId' bit of the corresponding instance
	// of csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionCircuitId interface{}

	// This object indicates the NAS port-identifier identifying the port on the
	// NAS providing access to the subscriber.  This column is valid only if the
	// 'nasPort' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionNasPort interface{}

	// This object indicates the domain associated with the subscriber.  This
	// column is valid only if the 'domain' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionDomain interface{}

	// This object indicates the username identifying the subscriber.  This column
	// is valid only if the 'username' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionUsername interface{}

	// This object indicates the accounting session identifier assigned to the
	// subscriber session.  This column is valid only if the 'accountingSid' bit
	// of the corresponding instance of csubSessionAvailableIdentities is '1'. The
	// type is interface{} with range: 0..4294967295.
	CsubSessionAcctSessionId interface{}

	// This object indicates the DNIS number dialed by the subscriber to access
	// the 'calling station' or AN.  This column is valid only if the 'dnis' bit
	// of the corresponding instance of csubSessionAvailableIdentities is '1'. The
	// type is string.
	CsubSessionDnis interface{}

	// This object indicates the type of media providing access to the subscriber.
	// This column is valid only if the 'media' bit of the corresponding instance
	// of csubSessionAvailableIdentities is '1'. The type is SubscriberMediaType.
	CsubSessionMedia interface{}

	// This object indicates whether the subscriber session was established using
	// multi-link PPP negotiation.  This column is valid only if the
	// 'mlpNegotiated' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is bool.
	CsubSessionMlpNegotiated interface{}

	// This object indicates the type of protocol providing access to the
	// subscriber.  This column is valid only if the 'protocol' bit of the
	// corresponding instance of csubSessionAvailableIdentities is '1'. The type
	// is SubscriberProtocolType.
	CsubSessionProtocol interface{}

	// This object indicates the name of the class matching the DHCP DISCOVER
	// message received from the subscriber.  This column is valid only if the
	// 'dhcpClass' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string.
	CsubSessionDhcpClass interface{}

	// This object indicates the name of the VPDN used to carry the subscriber
	// session to the system.  This column is valid only if the 'tunnelName' bit
	// of the corresponding instance of csubSessionAvailableIdentities is '1'. The
	// type is string.
	CsubSessionTunnelName interface{}

	// This object indicates the location of the subscriber. The type is string.
	CsubSessionLocationIdentifier interface{}

	// This object indicates the name used to identify the services subscribed by
	// a particular session. The type is string.
	CsubSessionServiceIdentifier interface{}

	// This object indicates when the subscriber session is updated with new
	// policy information. The type is string.
	CsubSessionLastChanged interface{}

	// This object indicates the type of IP address assigned to the subscriber on
	// the customer-facing side of the system.  This column is valid only if the
	// 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'.  In Dual stack scenarios both
	// 'csubSessionNativeIpAddrType' and  'csubSessionNativeIpAddrType2' will be
	// valid. The type is InetAddressType.
	CsubSessionNativeIpAddrType2 interface{}

	// This object indicates the IP address assigned to the subscriber on the
	// customer-facing side of the system.  This column is valid only if the
	// 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionNativeIpAddr2 interface{}

	// This object indicates the corresponding mask for the IP address assigned to
	// the subscriber on the customer-facing side of the system.  This column is
	// valid only if the 'nativeIpAddress' bit of the corresponding instance of
	// csubSessionAvailableIdentities is '1'. The type is string with length:
	// 0..255.
	CsubSessionNativeIpMask2 interface{}
}

CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry This entry contains data describing a subscriber sessions, including its state, configuration, and collected identities.

An entry exists for a corresponding entry in the ifTable describing a subscriber session. Currently, subscriber sessions must have one of the following ifType values:

'ppp'
'ipSubscriberSession'
'l2SubscriberSession'

The system creates an entry when it establishes a subscriber session. Likewise, the system destroys an entry when it terminates the corresponding subscriber session.

func (*CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry) GetEntityData

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment

type CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment string

CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment represents profile.

const (
	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_none CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "none"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_other CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "other"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_static CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "static"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_localPool CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "localPool"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_dhcpv4 CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "dhcpv4"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_dhcpv6 CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "dhcpv6"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_userProfileIpAddr CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "userProfileIpAddr"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_userProfileIpSubnet CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "userProfileIpSubnet"

	CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment_userProfileNamedPool CISCOSUBSCRIBERSESSIONMIB_CsubSessionTable_CsubSessionEntry_CsubSessionIpAddrAssignment = "userProfileNamedPool"
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL