cisco_ipsla_automeasure_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following:

  1. Use of grouping - Group is an aggregation of operations sharing the same type, for example UDP jitter type, with common characteristics like frequency, interval etc. Groups are formed by policies dictated either per customer, or by service level or any other requirements. So, for example, there could be separate groups for customers named Customer A, Customer B etc, or service levels named Gold-service, Silver-service etc. A single group will contain one and only one IP SLA operation definition or reference a single template.
  2. Use of templates - It has been observed that operations can be configured quickly if the variants such as IP address and ports can be configured separately and then combined with a template consisting of invariants. This allows for re-use of the invariant template with various combinations of destination addresses and ports, the benefits for which are multiplied when considering groupings.
  3. Auto operations - With this feature the software will try to automatically kickstart operations by making intelligent assumptions. For example, if no specific operation is referenced by the group configuration then an ICMP jitter operation is assumed by default.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOIPSLAAUTOMEASUREMIB 

type CISCOIPSLAAUTOMEASUREMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A table that contains IP SLA auto measure group definitions.
	CipslaAutoGroupTable CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable

	// A table contains the list of destination IP addresses and ports associated
	// to the auto measure group destination name.
	CipslaAutoGroupDestTable CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable

	// A table that contains reaction configurations for templates. Each
	// conceptual row in cipslaReactTable corresponds  to a reaction configured
	// for one template.  Each template can have multiple reactions and hence
	// there can be  multiple rows for a particular template. Different template
	// types can have different reactions. The reaction type is  specified as
	// cipslaReactVar based upon template type as some  reaction types are
	// applicable just for specific template types.
	CipslaReactTable CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable

	// A table of group scheduling definitions.
	CipslaAutoGroupSchedTable CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable
}

CISCOIPSLAAUTOMEASUREMIB

func (*CISCOIPSLAAUTOMEASUREMIB) GetEntityData 

func (cISCOIPSLAAUTOMEASUREMIB *CISCOIPSLAAUTOMEASUREMIB) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry containing the destination IP addresses and port configurations
	// associated to auto measure group destination name. The type is slice of
	// CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry.
	CipslaAutoGroupDestEntry []*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable A table contains the list of destination IP addresses and ports associated to the auto measure group destination name.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable) GetEntityData 

func (cipslaAutoGroupDestTable *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This is the name for an auto measure group
	// destination. The type is string with length: 1..64.
	CipslaAutoGroupDestName interface{}

	// This attribute is a key. The type of the internet address of a destination
	// for an auto measure group. The type is InetAddressType.
	CipslaAutoGroupDestIpAddrType interface{}

	// This attribute is a key. The internet address of a destination for an auto
	// measure group. The type of this address is determined by the value of
	// cipslaAutoGroupDestIpAddrType. The type is string with length: 0..255.
	CipslaAutoGroupDestIpAddr interface{}

	// This attribute is a key. This object represents the destination port
	// number. For ICMP echo and ICMP jitter, the suggested value is  '0'. The
	// type is interface{} with range: 0..65535.
	CipslaAutoGroupDestPort interface{}

	// The storage type of this conceptual row.  By default the entry will be
	// saved into non-volatile memory. The type is StorageType.
	CipslaAutoGroupDestStorageType interface{}

	// The status of the conceptual destination table control row. No other
	// objects in this row need to be set before this object can become active.
	// During 'destroy', when cipslaAutoGroupDestIpAddr is specified  as '0.0.0.0'
	// and cipslaAutoGroupDestPort is specified as '0',  then all the rows with
	// same cipslaAutoGroupDestName will be  deleted. The type is RowStatus.
	CipslaAutoGroupDestRowStatus interface{}
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry An entry containing the destination IP addresses and port configurations associated to auto measure group destination name.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry) GetEntityData 

func (cipslaAutoGroupDestEntry *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupDestTable_CipslaAutoGroupDestEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of objects that define specific configuration for group scheduling.
	// The type is slice of
	// CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry.
	CipslaAutoGroupSchedEntry []*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable A table of group scheduling definitions.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable) GetEntityData 

func (cipslaAutoGroupSchedTable *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This string uniquely identifies a row in the
	// cipslaAutoGroupSchedTable. The type is string with length: 1..64.
	CipslaAutoGroupSchedId interface{}

	// Specifies the time duration between initiating two IP SLA operations
	// generated via the auto measure group. The type is interface{} with range:
	// 100..99000. Units are seconds.
	CipslaAutoGroupSchedPeriod interface{}

	// Specifies the duration between initiating each RTT operation for one IP SLA
	// operation generated via the auto  measure group.  The value of this object
	// is only effective when both cipslaAutoGroupSchedMaxInterval and
	// cipslaAutoGroupSchedMinInterval have zero values. The type is interface{}
	// with range: 1..604800. Units are seconds.
	CipslaAutoGroupSchedInterval interface{}

	// This object specifies the life of all the operations that are getting group
	// scheduled. This value will be placed into cipslaAutoGroupSchedRttLife
	// object when this conceptual control row becomes 'active'.  The value
	// 2147483647 has a special meaning. When this object is set to 2147483647,
	// the rttMonCtrlOperRttLife object for all the operations will not decrement,
	// and thus the life time of the  operation will never end. The type is
	// interface{} with range: 0..2147483647. Units are seconds.
	CipslaAutoGroupSchedLife interface{}

	// This object specifies the ageout value of the operations that are getting
	// group scheduled. This value will be placed into
	// rttMonSchedAdminConceptRowAgeout object for each of the operations in the
	// group when this conceptual control row becomes  'active'.  When this value
	// is set to zero, the operations will never ageout. The type is interface{}
	// with range: 0..2073600. Units are seconds.
	CipslaAutoGroupSchedAgeout interface{}

	// Specifies the max duration between initiating each RTT operation for one IP
	// SLA operation in the group. The type is interface{} with range: 0..604800.
	// Units are seconds.
	CipslaAutoGroupSchedMaxInterval interface{}

	// Specifies the min duration between initiating each RTT operation for one IP
	// SLA operation in the group.  The value of this object should be lower than
	// the value of cipslaAutoGroupSchedMaxInterval. The type is interface{} with
	// range: 0..604800. Units are seconds.
	CipslaAutoGroupSchedMinInterval interface{}

	// This is the time in seconds after which the operations of the associated
	// groups  will take transition to active state. When set to the value other
	// than '1' (pending), then all  objects in this row cannot be modified. The
	// type is interface{} with range: 0..604800. Units are seconds.
	CipslaAutoGroupSchedStartTime interface{}

	// The storage type of this conceptual row.  By default the entry will be
	// saved into non-volatile memory. The type is StorageType.
	CipslaAutoGroupSchedStorageType interface{}

	// The status of the conceptual group schedule control row.  When the status
	// is active and the value of  cipslaAutoGroupSchedStartTime is '1', the other
	// writable  objects may be modified.  This object can be set to 'destroy'
	// from any value at any time. When this object is set to 'destroy' it will
	// stop all the  operations which had been group scheduled by it earlier,
	// before destroying the group schedule control row. The type is RowStatus.
	CipslaAutoGroupSchedRowStatus interface{}
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry A list of objects that define specific configuration for group scheduling.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry) GetEntityData 

func (cipslaAutoGroupSchedEntry *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupSchedTable_CipslaAutoGroupSchedEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry containing the configurations for a particular auto measure group.
	// The type is slice of
	// CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry.
	CipslaAutoGroupEntry []*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable A table that contains IP SLA auto measure group definitions.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable) GetEntityData 

func (cipslaAutoGroupTable *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry 

type CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A group name which is used by a management
	// application to identify the group. The type is string with length: 1..64.
	CipslaAutoGroupName interface{}

	// This field is used to provide description for the group. The type is string
	// with length: 0..128.
	CipslaAutoGroupDescription interface{}

	// This object refers to the cipslaAutoGroupDestName in
	// cipslaAutoGroupDestTable. If the name entered  is not present in
	// cipslaAutoGroupDestTable, then when  group is scheduled, no ip sla
	// operations will be created. The type is string with length: 0..64.
	CipslaAutoGroupDestinationName interface{}

	// This object represents the destination port number for auto discovery use.
	// The type is interface{} with range: 0..65535.
	CipslaAutoGroupADDestPort interface{}

	// A string which is used by a management application to identify the template
	// which is associated with the group. Depends on cipslaAutoGroupOperType,
	// this object refers to cipslaIcmpEchoTmplName in cipslaIcmpEchoTmplTable, or
	// cipslaUdpEchoTmplName in cipslaUdpEchoTmplTable, or cipslaTcpConnTmplName
	// in cipslaTcpConnTmplTable, or cipslaIcmpJitterTmplName in
	// cipslaIcmpJitterTmplTable, or ciscoIpSlaUdpJitterTmplName in
	// ciscoIpSlaUdpJitterTmplTable. The type is string with length: 0..64.
	CipslaAutoGroupOperTemplateName interface{}

	// This object refers to the cipslaAutoGroupSchedId in
	// cipslaAutoGroupSchedTable, and is used to schedule  this group. The type is
	// string with length: 0..64.
	CipslaAutoGroupSchedulerId interface{}

	// When this object is set to true, QoS is enabled for this group and this
	// group is linked to policy map. The  restriction is that after QoS is
	// enabled, it can not be  disabled for this group. The type is bool.
	CipslaAutoGroupQoSEnable interface{}

	// This object specifies the type of IP SLA operation. When operation type is
	// not ICMP jitter, then  cipslaAutoGroupOperTemplateName must be specified.
	// The type is IpSlaOperType.
	CipslaAutoGroupOperType interface{}

	// When this object is set to true, destination IP address is populated
	// through auto-discovery. The type is bool.
	CipslaAutoGroupDestIPADEnable interface{}

	// This object specifies number of measurement retries to be attempted for the
	// discovered end point after the  connection to the end point is broken. If
	// there is no  re-registration message received, the end point will be  in
	// inactive state.  When the value of cipslaAutoGroupDestIPADEnable is
	// 'false', the value of this object has no effect. The type is interface{}
	// with range: 1..65536.
	CipslaAutoGroupADMeasureRetry interface{}

	// This object represents the ageout time for the discovered end point.  If
	// the end point becomes inactive for the period  of ageout time, the end
	// point will be removed from the  discovered end point list.  When the value
	// of cipslaAutoGroupDestIPADEnable is  'false', the value of this object has
	// no effect. The type is interface{} with range: 0..65536. Units are seconds.
	CipslaAutoGroupADDestIPAgeout interface{}

	// The storage type of this conceptual row. The type is StorageType.
	CipslaAutoGroupStorageType interface{}

	// The status of the conceptual group control row.  When the status is active,
	// the other writable objects may be modified unless the scheduler with name
	// specified by cipslaAutoGroupSchedulerId is scheduled. The type is
	// RowStatus.
	CipslaAutoGroupRowStatus interface{}
}

CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry An entry containing the configurations for a particular auto measure group.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry) GetEntityData 

func (cipslaAutoGroupEntry *CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable 

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A base list of objects that define a conceptual reaction configuration
	// control row. The type is slice of
	// CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry.
	CipslaReactEntry []*CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry
}

CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable A table that contains reaction configurations for templates. Each conceptual row in cipslaReactTable corresponds to a reaction configured for one template.

Each template can have multiple reactions and hence there can be multiple rows for a particular template. Different template types can have different reactions. The reaction type is specified as cipslaReactVar based upon template type as some reaction types are applicable just for specific template types.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable) GetEntityData 

func (cipslaReactTable *CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry 

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is IpSlaOperType. Refers to
	// cisco_ipsla_automeasure_mib.CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry_CipslaAutoGroupOperType
	CipslaAutoGroupOperType interface{}

	// This attribute is a key. This object along with cipslaAutoGroupOperType and
	// cipslaAutoGroupOperTemplateName identifies a particular
	// reaction-configuration for one IP SLA  template.  This number is persistent
	// across reboots. The type is interface{} with range: 1..2147483647.
	CipslaReactConfigIndex interface{}

	// This attribute is a key. The type is string with length: 0..64. Refers to
	// cisco_ipsla_automeasure_mib.CISCOIPSLAAUTOMEASUREMIB_CipslaAutoGroupTable_CipslaAutoGroupEntry_CipslaAutoGroupOperTemplateName
	CipslaAutoGroupOperTemplateName interface{}

	// This object specifies the type of reaction configured for an IP SLA
	// template. Default value is 'rtt' for ICMP echo, UDP echo and TCP connect.
	// Default value is 'jitterAvg' for UDP jitter and  ICMP jitter.  The reaction
	// types 'rtt', 'timeout', 'connectionLoss' and 'verifyError' can be
	// configured for all template types.  The reaction types 'jitterSDAvg',
	// 'jitterDSAvg', 'jitterAvg',  'packetLateArrival', 'packetOutOfSequence',
	// 'maxOfPositiveSD', 'maxOfNegativeSD', 'maxOfPositiveDS' 'maxOfNegativeDS',
	// 'mos' and 'icpif' can be configured for  UDP jitter and ICMP jitter types
	// only.  The reaction types 'packetLossDS', 'packetLossSD' and  'packetMIA'
	// can be configured for UDP jitter type only.  The reaction types
	// 'successivePacketLoss', 'maxOfLatencyDS',  'maxOfLatencySD',
	// 'latencyDSAvg', 'latencySDAvg' and  'packetLoss' can be configured for ICMP
	// jitter type only. The type is IpSlaReactVar.
	CipslaReactVar interface{}

	// This object specifies the conditions under which a notification ( trap ) is
	// sent. The rttMonReactOccurred object defined in rttMonReactTable in
	// CISCO-RTTMON-MIB will change accordingly:  never(1)       -
	// rttMonReactOccurred is never set  immediate(2)   - rttMonReactOccurred is
	// set to 'true' when the                  value of parameter for which
	// reaction is                  configured ( e.g rtt, jitterAvg, packetLossSD,
	// mos etc ) violates the threshold.                  Conversely,
	// rttMonReactOccurred is set to 'false'                  when the parameter (
	// e.g rtt, jitterAvg,                  packetLossSD, mos etc ) is below the
	// threshold                  limits.  consecutive(3) - rttMonReactOccurred is
	// set to true when the value                  of parameter for which reaction
	// is configured                  ( e.g rtt, jitterAvg, packetLossSD, mos etc
	// )                  violates the threshold for configured consecutive
	// times.                  Conversely, rttMonReactOccurred is set to false
	// when the value of parameter ( e.g rtt, jitterAvg
	// packetLossSD, mos etc ) is below the threshold                  limits for
	// the same number of consecutive                  operations.  xOfy(4)
	// - rttMonReactOccurred is set to true when x                  ( as specified
	// by cipslaReactThresholdCountX )                  out of the last y ( as
	// specified by                  cipslaReacthresholdCountY ) times the value
	// of                  parameter for which the reaction is configured
	// ( e.g rtt, jitterAvg, packetLossSD, mos etc )                  violates the
	// threshold.                  Conversely, it is set to false when x, out of
	// the                  last y times the value of parameter                  (
	// e.g rtt, jitterAvg, packetLossSD, mos ) is                  below the
	// threshold limits.                  NOTE: If x > y, this will never
	// generate a reaction.  average(5)    - rttMonReactOccurred is set to true
	// when the                 average ( cipslaReactThresholdCountX times )
	// value of parameter for which reaction is                  configured ( e.g
	// rtt, jitterAvg, packetLossSD,                 mos etc ) violates the
	// threshold condition.                 Conversely, it is set to false when
	// the                 average value of parameter ( e.g rtt, jitterAvg,
	// packetLossSD, mos etc ) is below the threshold                 limits.  If
	// this value is changed by a management station, rttMonReactOccurred is set
	// to false, but no reaction is generated if the prior value of
	// rttMonReactOccurred was true. The type is CipslaReactThresholdType.
	CipslaReactThresholdType interface{}

	// Specifies what type, if any, of reaction to generate if one of the watched
	// (reaction-configuration ) conditions is satisfied:  none(1)
	// - no reaction is generated notificationOnly(2)    - a notification is
	// generated. The type is CipslaReactActionType.
	CipslaReactActionType interface{}

	// This object defines the higher threshold limit. If the value ( e.g rtt,
	// jitterAvg, packetLossSD etc ) rises above this limit and if the condition
	// specified in cipslaReactThresholdType is satisfied, a notification is
	// generated.  Default value of cipslaReactThresholdRising for    'rtt' is
	// 5000    'jitterAvg' is 100.    'jitterSDAvg' is 100.    'jitterDSAvg' 100.
	// 'packetLossSD' is 10000.    'packetLossDS' is 10000.    'mos' is 500.
	// 'icpif' is 93.    'packetMIA' is 10000.    'packetLateArrival' is 10000.
	// 'packetOutOfSequence' is 10000.    'maxOfPositiveSD' is 10000.
	// 'maxOfNegativeSD' is 10000.    'maxOfPositiveDS' is 10000.
	// 'maxOfNegativeDS' is 10000.    'successivePacketLoss' is 1000.
	// 'maxOfLatencyDS' is 5000.    'maxOfLatencySD' is 5000.    'latencyDSAvg' is
	// 5000.    'latencySDAvg' is 5000.    'packetLoss' is 10000.  This object is
	// not applicable if the cipslaReactVar is 'timeout', 'connectionLoss' or
	// 'verifyError'. For 'timeout', 'connectionLoss' and 'verifyError' default
	// value of  cipslaReactThresholdRising will be 0. The type is interface{}
	// with range: 0..4294967295.
	CipslaReactThresholdRising interface{}

	// This object defines a lower threshold limit. If the value ( e.g rtt,
	// jitterAvg, packetLossSD etc ) falls below this limit and if the condition
	// specified in cipslaReactThresholdType is satisfied, a notification  is
	// generated. This object value can not bigger than cipslaReactThresholdRising
	// value.  Default value of cipslaReactThresholdFalling    'rtt' is 3000
	// 'jitterAvg' is 100.    'jitterSDAvg' is 100.    'jitterDSAvg' 100.
	// 'packetLossSD' is 10000.    'packetLossDS' is 10000.    'mos' is 500.
	// 'icpif' is 93.    'packetMIA' is 10000.    'packetLateArrival' is 10000.
	// 'packetOutOfSequence' is 10000.    'maxOfPositiveSD' is 10000.
	// 'maxOfNegativeSD' is 10000.    'maxOfPositiveDS' is 10000.
	// 'maxOfNegativeDS' is 10000.    'successivePacketLoss' is 1000.
	// 'maxOfLatencyDS' is 3000.    'maxOfLatencySD' is 3000.    'latencyDSAvg' is
	// 3000.    'latencySDAvg' is 3000.    'packetLoss' is 10000.  This object is
	// not applicable if the cipslaReactVar is 'timeout', 'connectionLoss' or
	// 'verifyError'. For 'timeout', 'connectionLoss' and 'verifyError', default
	// value of cipslaReactThresholdFalling will be 0. The type is interface{}
	// with range: 0..4294967295.
	CipslaReactThresholdFalling interface{}

	// If cipslaReactThresholdType value is 'xOfy', this object defines the 'x'
	// value.  If cipslaReactThresholdType value is 'consecutive' this object
	// defines the number of consecutive occurrences that needs threshold
	// violation before setting  cipslaReactOccurred as true.  If
	// cipslaReactThresholdType value is 'average' this object defines the number
	// of samples that needs be considered for calculating average.  This object
	// has no meaning if cipslaReactThresholdType has value of 'never' and
	// 'immediate'. The type is interface{} with range: 1..16.
	CipslaReactThresholdCountX interface{}

	// This object defines the 'y' value of the xOfy condition if
	// cipslaReactThresholdType is 'xOfy'. The default for the  'y' value is 5.
	// For other values of cipslaReactThresholdType, this object is not
	// applicable. The type is interface{} with range: 1..16.
	CipslaReactThresholdCountY interface{}

	// The storage type of this conceptual row.  By default the entry will be
	// saved into non-volatile memory. The type is StorageType.
	CipslaReactStorageType interface{}

	// This objects indicates the status of the conceptual Reaction Control Row.
	// When this object moves to active state, the conceptual row  is monitored
	// and notifications are generated when threshold  violation takes place.  In
	// order for this object to become active cipslaReactVar must be defined. All
	// other objects assume default values.  When the  status is active, the
	// following objects in that row can be  modified.  cipslaReactThresholdType,
	// cipslaReactActionType,  cipslaReactThresholdRising,
	// cipslaReactThresholdFalling,  cipslaReactThresholdCountX,
	// cipslaReactThresholdCountY,  cipslaReactStorageType  This object can be set
	// to 'destroy' from any value at any time. When this object is set to
	// 'destroy' no reaction configuration would exist. The reaction configuration
	// for the template is  removed. The type is RowStatus.
	CipslaReactRowStatus interface{}
}

CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry A base list of objects that define a conceptual reaction configuration control row.

func (*CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry) GetEntityData 

func (cipslaReactEntry *CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType 

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType string

CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType represents notificationOnly(2) - a notification is generated 

const (
	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType_none CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType = "none"

	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType_notificationOnly CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactActionType = "notificationOnly"
)

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType 

type CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType string

CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType represents rttMonReactOccurred was true. 

const (
	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType_never CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType = "never"

	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType_immediate CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType = "immediate"

	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType_consecutive CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType = "consecutive"

	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType_xOfy CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType = "xOfy"

	CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType_average CISCOIPSLAAUTOMEASUREMIB_CipslaReactTable_CipslaReactEntry_CipslaReactThresholdType = "average"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.