cisco_data_collection_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module allows a management application to select a set of MIB object instances whose values need to be collected on a periodic basis. The term 'data' in the context of this MIB is used to generically refer to the values of the selected set of object instances.

Once the required setup is done, the MIB implementation carries out the following periodic tasks:

  • collects the required object values into local file-like entities called VFiles (virtual files).
  • transfers the VFiles to specified locations.
  • carries out VFile management operations.

Some of the key features of this MIB are:

a) Allows grouping of MIB objects into groups called
   data groups. The constraint is that the MIB objects
   grouped into a data group, need to have the same
   semantic MIB index. So it is possible to group MIB
   objects belonging to different MIB tables into a
   single data group as long as the above constraint is
   met.
   For e.g. it is possible to group ifInOctets from
   ifTable, ifHCInOctets from ifXTable,
   dot3StatsExcessiveCollisions from dot3StatsTable
   into a single data group.

b) Allows the application to specify a set of instances
   (of the MIB objects in a data group) whose values
   need to be collected.

c) The required data can be collected for each such
   data group on a periodic basis into a virtual file
   (VFile). A VFile is an abstraction of a file.

d) The format of the contents of the VFile, can be
   specified by the application.

e) An application can also specify a collection period.
   A collection period is an interval of time during
   which data is collected into a VFile. After the
   collection period ends, the VFile is frozen, and a
   new VFile is created for storing data. The frozen
   VFile is then transferred to a specified destination.
   An application can choose to retain such frozen
   VFiles on the device for a certain period of time,
   called the retention period.

       Data Collection MIB vs Bulkfile MIB
       ***********************************
 The data collection MIB can pretty much do what the
 CISCO-BULK-FILE-MIB (Bulkfile MIB) can do. The 'manual'
 mode of the Data collection MIB is similar to the way
 in which the Bulkfile MIB operates.

 However the data collection MIB is mainly targetted
 for medium to high-end platforms which have sufficient
 local storage (volatile or permanent) to store VFiles.
 Locally storing VFiles, helps minimize loss of data
 during temporary network outages. If the local store
 is permament, then the collected data is also available
 across agent restarts.

 The data collection MIB has more powerful data
 selection features than the Bulkfile MIB. It allows
 grouping of MIB objects from different tables into
 data groups. It also incorporates a more flexible
 instance selection mechanism, where the application
 is not restricted to fetching an entire MIB table.

              Definitions:
              ************
  Base objects:
  *************
  MIB objects whose values an application needs to
  collect.

  Data group:
  ***********
  A group of base objects. Can be of 2 types: 'object'
  and 'table'. An 'object' type data group can consist
  of only one fully instantiated base object. A 'table'
  type data group can consist of more than one base
  objects, each a columnar object in a conceptual
  table. In addition a 'table' type data group can
  specify the instances of the base objects whose
  values need to be collected. In the context of this
  MIB, collecting data for a data group means fetching
  the values of the associated base object instances
  and storing them into VFiles.

  Virtual File (VFile):
  *********************
  A VFile is a file like entity used to collect data.
  An agent might choose to implement a VFile as a
  simple in-memory buffer, or it might choose to
  use a file in it's filesystem. An application does
  not really need to know the location of a VFile
  - the MIB provides mechanisms to transfer the
  VFile to application specified locations. However
  if the implementation supports it, the application
  can specify the location of the VFiles.

  Current VFile:
  **************
  The VFile into which data is currently being
   collected.

  Frozen VFile:
  *************
  A VFile which is no longer used for collecting
  data. Only frozen VFiles can be transferred to
  specified destinations.

  Collection interval:
  ********************
  A collection interval is associated with a VFile.
  It is the interval of time over which a VFile
  is used to collect data.
  This interval of time can be specified by the
  application. However there are conditions under
  which a collection interval can be shorter than
  the specified time. For e.g. a collection
  interval is prematurely terminated when the
  maximum size of a VFile is exceeded, or when
  there is an error condition.

  Polling period:
  ***************
  A polling period is associated with a data
  group. It determines the frequency at which
  the base objects of a data group should
  be fetched and stored into a VFile.

  Data collection operations:
  **************************
  A generic term used to refer to operations
  that are carried out while collecting data.
  These include:
     - Periodically creating new VFiles for
       collecting data.
     - Transferring frozen VFiles either
       automatically or on demand.
     - Fetching base object values and storing
       them into current VFiles, either periodically
       or on demand.
     - Deleting frozen VFiles, either periodically
       or on demand.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCODATACOLLECTIONMIB

type CISCODATACOLLECTIONMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	CdcVFile CISCODATACOLLECTIONMIB_CdcVFile

	// A table for setting up VFiles for collecting data.
	CdcVFileTable CISCODATACOLLECTIONMIB_CdcVFileTable

	// A table to manage frozen VFiles.
	CdcVFileMgmtTable CISCODATACOLLECTIONMIB_CdcVFileMgmtTable

	// A table for specifying data groups.
	CdcDGTable CISCODATACOLLECTIONMIB_CdcDGTable

	// A table specifying the base objects of a 'table' type data group.
	CdcDGBaseObjectTable CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable

	// Identifies the instances of the base objects that need to be fetched for a
	// 'table' type data group.  The agent is not responsible for verifying that
	// the instances specified for a data group do not overlap.
	CdcDGInstanceTable CISCODATACOLLECTIONMIB_CdcDGInstanceTable

	// A table for configuring file transfer operations.
	CdcFileXferConfTable CISCODATACOLLECTIONMIB_CdcFileXferConfTable
}

CISCODATACOLLECTIONMIB

func (*CISCODATACOLLECTIONMIB) GetEntityData

func (cISCODATACOLLECTIONMIB *CISCODATACOLLECTIONMIB) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable

type CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An individual entry in this table. Each entry is a  {subtree, list} tuple.
	// Each tuple identifies a set of  base objects for the associated data group.
	// The type is slice of
	// CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry.
	CdcDGBaseObjectEntry []*CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry
}

CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable A table specifying the base objects of a 'table' type data group.

func (*CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable) GetEntityData

func (cdcDGBaseObjectTable *CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry

type CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object's value when combined with the value
	// of cdcDGBaseObjectIndex uniquely identifies an entry in this table. An
	// application must use the same value (can  be randomly picked) for this
	// object while creating a group of entries that collectively identifies the
	// set of base objects for a data group. The type is interface{} with range:
	// 1..4294967295.
	CdcDGBaseObjectGrpIndex interface{}

	// This attribute is a key. This object's value when combined with the value
	// of cdcDGBaseObjectGrpIndex uniquely identifies an entry in this table.  A
	// managment application can assign incremental values starting from one, when
	// creating each entry in a group of entries (as identified by the value of
	// cdcDGBaseObjectGrpIndex). The type is interface{} with range:
	// 1..4294967295.
	CdcDGBaseObjectIndex interface{}

	// The subtree component of a {subtree, list} tuple.  This object's value may
	// be modified at any time. The change takes effect the next time data is
	// fetched for this data group. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CdcDGBaseObjectSubtree interface{}

	// The list component of a {subtree, list} tuple.  This object's value may be
	// modified at any time. The change takes effect the next time data is fetched
	// for this data group. The type is string with length: 0..16.
	CdcDGBaseObjectList interface{}

	// The status of this conceptual row.  This object cannot be set to 'active'
	// until values have been assigned to cdcDGBaseObjectSubtree &
	// cdcDGBaseObjectList. The type is RowStatus.
	CdcDGBaseObjectRowStatus interface{}
}

CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry An individual entry in this table. Each entry is a {subtree, list} tuple. Each tuple identifies a set of base objects for the associated data group.

func (*CISCODATACOLLECTIONMIB_CdcDGBaseObjectTable_CdcDGBaseObjectEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in this table. Each entry identifies one or more instances of the
	// base objects that need to be fetched. An instance is represented by an OID
	// fragment. The type is slice of
	// CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry.
	CdcDGInstanceEntry []*CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry
}

CISCODATACOLLECTIONMIB_CdcDGInstanceTable Identifies the instances of the base objects that need to be fetched for a 'table' type data group.

The agent is not responsible for verifying that the instances specified for a data group do not overlap.

func (*CISCODATACOLLECTIONMIB_CdcDGInstanceTable) GetEntityData

func (cdcDGInstanceTable *CISCODATACOLLECTIONMIB_CdcDGInstanceTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object's value when combined with the value
	// of cdcDGInstanceIndex uniquely identifies an entry in this table. An
	// application must use the same value (can  be randomly picked) for this
	// object while creating a group of entries that collectively identifies the
	// set of instances for a data group. The type is interface{} with range:
	// 1..4294967295.
	CdcDGInstanceGrpIndex interface{}

	// This attribute is a key. This object's value when combined with the value
	// of cdcDGInstanceGrpIndex uniquely identifies an entry in this table.  A
	// managment application can assign incremental values starting from one, when
	// creating each entry within a group of entries (as identified by the value
	// of cdcDGInstanceGrpIndex). The type is interface{} with range:
	// 1..4294967295.
	CdcDGInstanceIndex interface{}

	// Specifies the way in which the instances are to be used while collecting
	// data.   individual     The value of cdcDGInstanceOid is
	// appended to each base object of the                associated data group,
	// thus giving the exact                instance of the objects to be
	// collected.  range          The value of cdcDGInstanceOid is
	// appended to each base object in the                associated data group,
	// thus giving the                starting object instance of the range.
	// The value of cdcDGInstanceEndOid                is appended to to each base
	// object in the                associated data group, thus giving the
	// last object instances of the range.   repititions      The value of
	// cdcDGInstanceOid is                appended to each base object in the
	// associated data group, thus giving the                first object instance
	// of the next 'n'                instances that need to be collected.
	// The value of 'n' is set in                cdcDGInstanceNumRepititions.
	// subTree        The value of cdcDGInstanceOid is                appended to
	// each base object in the                associated data group, thus
	// identifying the                OBJECT IDENTFIFIER sub-tree, whose leaf
	// instances need to be collected.  other          The value of
	// cdcDGInstanceOtherPtr points to a                row (in another MIB table)
	// that contains MIB                specific instance selection criteria. A
	// MIB                defined for such purposes should describe
	// the selection criteria.  This object's value cannot be modified while the
	// value of cdcDGInstanceStatus is 'active'. The type is CdcDGInstanceType.
	CdcDGInstanceType interface{}

	// Contains the OBJECT IDENTIFIER fragment that identifies the instances of
	// the base objects that need to be collected.  If cdcDGInstanceType is
	// 'individual' then this value should be the OID fragment that, when appended
	// to each base MIB object gives the fully instantiated OID to be fetched.  If
	// cdcDGInstanceType is 'range' then this value should be the OID fragment
	// that, when appended to each base MIB object gives the start of a range of
	// object instances that needs to be fetched.  If cdcDGInstanceType is
	// 'subTree' then this value should be the OID fragment that, when appended to
	// each base MIB gives the sub-tree under which all leaf object instances need
	// to be fetched.  This object's value may be modified at any time. The change
	// takes effect the next time data is fetched for this data group. The type is
	// string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CdcDGInstanceOid interface{}

	// Contains the OID fragment that, when appended to each base object gives the
	// end of the range of object instances that needs to be fetched.  This value
	// is used only when the value of cdcDGInstanceType is of type 'range'.   This
	// object's value may be modified at any time. The change takes effect the
	// next time data is fetched for this data group. The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CdcDGInstanceOidEnd interface{}

	// Specifies the number of lexicographically consecutive object instances to
	// fetch.  This value is used only when the value of cdcDGInstanceType is of
	// type 'repititions'.    This object's value may be modified at any time. The
	// change takes effect the next time data is fetched for this data group. The
	// type is interface{} with range: 0..4294967295.
	CdcDGInstanceNumRepititions interface{}

	// Contains a pointer to a row in another MIB table that contains MIB specific
	// criteria for selecting instances.  This value is used only when the value
	// of cdcDGInstanceType is of type 'other'.   This object's value may be
	// modified at any time. The change takes effect the next time data is fetched
	// for this data group. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CdcDGInstanceOtherPtr interface{}

	// The status of this conceptual row. The type is RowStatus.
	CdcDGInstanceRowStatus interface{}
}

CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry An entry in this table. Each entry identifies one or more instances of the base objects that need to be fetched. An instance is represented by an OID fragment.

func (*CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType

type CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType string

CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType represents cdcDGInstanceStatus is 'active'.

const (
	CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType_individual CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType = "individual"

	CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType_range_ CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType = "range"

	CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType_repititions CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType = "repititions"

	CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType_subTree CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType = "subTree"

	CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType_other CISCODATACOLLECTIONMIB_CdcDGInstanceTable_CdcDGInstanceEntry_CdcDGInstanceType = "other"
)

type CISCODATACOLLECTIONMIB_CdcDGTable

type CISCODATACOLLECTIONMIB_CdcDGTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in this table. Each entry corresponds to a data group. A data
	// group is used to select data that needs to be collected into VFiles. The
	// selection is done by specifying the base objects and their instances for
	// which the values need to be fetched.  Data is collected only for those data
	// groups, that have the corresponding instance of cdcDGRowStatus set to
	// 'active'.   In order for data to be collected, each data group has to be
	// associated with a cdcVFileEntry (see cdcDGVFileIndex). If the data
	// collection mode of the associated cdcVFileEntry is automatic, then data is
	// fetched and stored into the current VFile of the associated cdcVFileEntry
	// at periodic intervals (cdcDGPollPeriod). The type is slice of
	// CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry.
	CdcDGEntry []*CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry
}

CISCODATACOLLECTIONMIB_CdcDGTable A table for specifying data groups.

func (*CISCODATACOLLECTIONMIB_CdcDGTable) GetEntityData

func (cdcDGTable *CISCODATACOLLECTIONMIB_CdcDGTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry

type CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An arbitrary integer used to uniquely identify
	// this entry. When creating an entry, a management application should pick a
	// random number. The type is interface{} with range: 1..4294967295.
	CdcDGIndex interface{}

	// A descriptive string. This object's value may be modified at any time. The
	// type is string.
	CdcDGComment interface{}

	// Identifies the type of this data group. object         Data is a single MIB
	// object. The fully                instantiated OID is specified in
	// cdcDGBaseObject.  table          Data is a logical table. The columns of
	// this table correspond to the base objects                specified in
	// cdcDGBaseObjectTable, and the                rows correspond to the values
	// of the instances                specified in cdcDGInstanceTable.  This
	// object's value cannot be modified while the value of cdcDGRowStatus is
	// 'active'. The type is CdcDGType.
	CdcDGType interface{}

	// Corresponds to a value of cdcVFileIndex. It is used to associate this data
	// group with a cdcVFileEntry. The values of the base objects for  this data
	// group are stored into the current VFile of the associated cdcVFileEntry.
	// This object's value may be modified at any time. The change takes effect
	// the next time data is fetched for this data group. The type is interface{}
	// with range: 1..4294967295.
	CdcDGVFileIndex interface{}

	// The tag for the target from which to obtain the data for this data group.
	// A length of 0 indicates the local system.  In this case, access to the
	// objects of this data group is under the security credentials of the
	// requester that set cdcDGRowStatus to 'active'. Those credentials are the
	// input parameters for isAccessAllowed from the Architecture for Describing
	// SNMP Management Frameworks.  Otherwise a search is carried out for an entry
	// in the snmpTargetAddrTable whose snmpTargetAddrTagList contains the tag
	// specified by the value of this object. The security credentials
	// (snmpTargetParamsEntry) of the first entry that satisfies the above
	// criteria, are passed as input parameters for isAccessAllowed.   This
	// object's value may be modified at any time. The change takes effect the
	// next time data is fetched for this data group. The type is string.
	CdcDGTargetTag interface{}

	// The management context from which to obtain data for this data group.  This
	// object's value may be modified at any time. The change takes effect the
	// next time data is fetched for this data group. The type is string.
	CdcDGContextName interface{}

	// The fully instantiated name of the MIB object whose value needs to be
	// fetched. This object's value is used only when cdcDGType is of type
	// 'object'.   This object's value may be modified at any time. The change
	// takes effect the next time data is fetched for this data group. The type is
	// string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CdcDGObject interface{}

	// Corresponds to a value of cdcDGBaseObjectGrpIndex, thus identifying a set
	// of entries in cdcDGBaseObjectTable, having this value of
	// cdcDGBaseObjectGrpIndex. This object's value is used only when cdcDGType is
	// of type 'table'.   This set of entries in cdcDGBaseObjectTable in turn
	// identifies the set of base objects, that makes up the columns  of this
	// 'table' type data group.     This object's value may be modified at any
	// time. The change takes effect the next time data is fetched for this data
	// group. The type is interface{} with range: 1..4294967295.
	CdcDGObjectGrpIndex interface{}

	// Corresponds to a value of cdcDGInstanceGrpIndex, thus identifying a set of
	// entries in cdcDGInstanceTable, having this value of cdcDGInstanceGrpIndex.
	// This object's value is used only when cdcDGType is of type 'table'.   The
	// set of entries in cdcDGInstanceTable, in turn identifies the set of
	// instances of the base objects, whose values need to fetched. If the value
	// is 0, then all instances of the base objects will be fetched.    This
	// object's value may be modified at any time. The change takes effect the
	// next time data is fetched for this data group. The type is interface{} with
	// range: 0..4294967295.
	CdcDGInstGrpIndex interface{}

	// Specifies the time intervals at which the data should be fetched for this
	// data group. This object's value is used only when the collection mode of
	// the associated cdcVFileEntry is automatic (see cdcVFileCollectMode).   A
	// periodic timer is started for this data group when cdcDGRowStatus is set to
	// 'active', provided the associated cdcVFileEntry has already been
	// 'activated', otherwise it is started when the associated cdcVFileEntry is
	// finally activated.   The time interval after which the first expiration of
	// this timer should occur, is calculated as follows:  (value of sysUpTime.0)
	// +  (value of cdcPollPeriod for this entry -     (value of sysUpTime.0 -
	// VFile activation time for the     associated cdcVFileEntry) %
	// cdcPollPeriod)  Subsequent expirations of the periodic timer can occur as
	// per the value specified in cdcDGPollPeriod. This helps in synchronizing
	// periodic polling of the data groups with respect to the VFile activation
	// time.  This object's value may be modified at any time, and the change must
	// take effect immediately. i.e. if the periodic timer has been started, it's
	// expiry time may need to be re-adjusted. The type is interface{} with range:
	// 1..86400. Units are seconds.
	CdcDGPollPeriod interface{}

	// The status of this conceptual row.  This object cannot be set to 'active'
	// until values have been assigned to  cdcDGVFileIndex & cdcDGColGrpIndex. The
	// type is RowStatus.
	CdcDGRowStatus interface{}
}

CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry An entry in this table. Each entry corresponds to a data group. A data group is used to select data that needs to be collected into VFiles. The selection is done by specifying the base objects and their instances for which the values need to be fetched.

Data is collected only for those data groups, that have the corresponding instance of cdcDGRowStatus set to 'active'.

In order for data to be collected, each data group has to be associated with a cdcVFileEntry (see cdcDGVFileIndex). If the data collection mode of the associated cdcVFileEntry is automatic, then data is fetched and stored into the current VFile of the associated cdcVFileEntry at periodic intervals (cdcDGPollPeriod).

func (*CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType

type CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType string

CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType represents cdcDGRowStatus is 'active'.

const (
	CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType_object CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType = "object"

	CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType_table CISCODATACOLLECTIONMIB_CdcDGTable_CdcDGEntry_CdcDGType = "table"
)

type CISCODATACOLLECTIONMIB_CdcFileXferConfTable

type CISCODATACOLLECTIONMIB_CdcFileXferConfTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An individual entry in the cdcFileXferConfTable. Each entry identifies a
	// primary and an optional secondary destination.  An entry is automatically
	// created in this table, whenever an entry is created in the cdcVFileTable.
	// The application needs to specify the URLs of the destination to which
	// frozen VFiles are transferred.   When a VFile is frozen, transfer will be
	// first initiated to the primary destination, if the transfer fails, then
	// transfer is initiated to the secondary destination. If this too fails, then
	// the cycle is repeated again after a specified time period (value of
	// cdcFileXferConfRetryPeriod) elapses. The type is slice of
	// CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry.
	CdcFileXferConfEntry []*CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry
}

CISCODATACOLLECTIONMIB_CdcFileXferConfTable A table for configuring file transfer operations.

func (*CISCODATACOLLECTIONMIB_CdcFileXferConfTable) GetEntityData

func (cdcFileXferConfTable *CISCODATACOLLECTIONMIB_CdcFileXferConfTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry

type CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_data_collection_mib.CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileIndex
	CdcVFileIndex interface{}

	// The URL which specifies the primary destination to which the file has to be
	// transferred. The URL should contain the base-name of the remote file, the
	// suffix will be carried over from the name of the VFile being tranferred,
	// and will be automatically appended by the agent.  This object's value may
	// be modified at any time. The type is string with length: 0..255.
	CdcFileXferConfPriUrl interface{}

	// The URL which specifies the secondary destination to which the file has to
	// be transferred if the transfer to the  primary destination fails. Failure
	// occurs when the file  cannot be transferred in it's entirety to the
	// specified  destination for some reason. Some common reasons for such
	// failures are listed out in CdcFileXferStatus.    The specified URL should
	// contain the base-name of the remote file, the suffix will be carried over
	// from the name of the VFile being tranferred, and will be automatically
	// appended by the agent.   This object's value may be modified at any time.
	// The type is string with length: 0..255.
	CdcFileXferConfSecUrl interface{}

	// Specifies the time interval after which transfer has to be retried.
	// Transfer needs to be retried only if in a previous  attempt the file could
	// not be successfully transferred to  either the primary destination or the
	// secondary destination.  This object's value may be modified at any time.
	// The type is interface{} with range: 60..86400. Units are seconds.
	CdcFileXferConfRetryPeriod interface{}

	// Maximum number of times, transfer has to be retried. If the retry count
	// exceeds this value, then no further attempts will be made.   This object's
	// value may be modified at any time. The type is interface{} with range:
	// 0..256. Units are seconds.
	CdcFileXferConfRetryCount interface{}

	// When set to 'true', cdcFileXferComplete notification will be sent out in
	// the event of a successful file transfer. The type is bool.
	CdcFileXferConfSuccessEnable interface{}

	// When set to 'true', cdcFileXferComplete notification will be sent out in
	// the event of a file transfer failure. The type is bool.
	CdcFileXferConfFailureEnable interface{}
}

CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry An individual entry in the cdcFileXferConfTable. Each entry identifies a primary and an optional secondary destination.

An entry is automatically created in this table, whenever an entry is created in the cdcVFileTable. The application needs to specify the URLs of the destination to which frozen VFiles are transferred.

When a VFile is frozen, transfer will be first initiated to the primary destination, if the transfer fails, then transfer is initiated to the secondary destination. If this too fails, then the cycle is repeated again after a specified time period (value of cdcFileXferConfRetryPeriod) elapses.

func (*CISCODATACOLLECTIONMIB_CdcFileXferConfTable_CdcFileXferConfEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcVFile

type CISCODATACOLLECTIONMIB_CdcVFile struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object's value reads 'true', if the agent implementation of this MIB
	// supports placement of VFiles in application specified persistent storage
	// locations. Otherwise  the value is 'false'. The type is bool.
	CdcVFilePersistentStorage interface{}

	// A global limit for the number of consecutive times the maximum VFile size
	// (cdcVFileMaxSize) is exceeded for a given VFile. When this limit is
	// exceeded the offending cdcVFileEntry is moved to the error state (see
	// cdcVFileOperStatus). The type is interface{} with range: 1..4294967295.
	CdcVFileMaxSizeHitsLimit interface{}
}

CISCODATACOLLECTIONMIB_CdcVFile

func (*CISCODATACOLLECTIONMIB_CdcVFile) GetEntityData

func (cdcVFile *CISCODATACOLLECTIONMIB_CdcVFile) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in cdcVFileMgmtTable. Each entry corresponds to a frozen VFile. An
	// entry is created in this table, whenever a VFile is frozen. An entry is
	// removed from this table whenever a frozen VFile is deleted either because
	// the retention period elapsed or because it was adminstratively deleted.  If
	// the configuration specified in cdcVFileEntry is persisted across
	// system/agent restarts AND the VFiles created as a result of that
	// configuration are persisted across restarts, then this table must be
	// populated with entries corresponding to those persisted VFiles. However any
	// state related to an entry, like time to live etc. need not be maintained
	// across restarts. The type is slice of
	// CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry.
	CdcVFileMgmtEntry []*CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry
}

CISCODATACOLLECTIONMIB_CdcVFileMgmtTable A table to manage frozen VFiles.

func (*CISCODATACOLLECTIONMIB_CdcVFileMgmtTable) GetEntityData

func (cdcVFileMgmtTable *CISCODATACOLLECTIONMIB_CdcVFileMgmtTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_data_collection_mib.CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileIndex
	CdcVFileIndex interface{}

	// This attribute is a key. This value is a running counter starting at 1,
	// generated by the agent so that the combination of  cdcVFileIndex and
	// cdcVFileMgmtIndex uniquely identifies a frozen VFile. The deleted file
	// indicies do not get reused.  This object's value needs to be unique only
	// across the set of frozen VFiles corresponding to a cdcVFileEntry
	// (identified by cdcVFileIndex). The type is interface{} with range:
	// 1..4294967295.
	CdcVFileMgmtIndex interface{}

	// The full name of the VFile. If the VFile is stored as a file in the agent's
	// filesystem, then this value also contains the absolute path of the file.
	// The type is string.
	CdcVFileMgmtName interface{}

	// The timestamp when this VFile was created, in the date-time format. The
	// type is string.
	CdcVFileMgmtTimestamp interface{}

	// The time left before this VFile is deleted (see cdcVFileRetentionPeriod).
	// The type is interface{} with range: 60..86400. Units are seconds.
	CdcVFileMgmtTimeToLive interface{}

	// A control to manage VFiles.   idle           This value can be only be
	// read. It indicates                that no management action is currently
	// being                performed on this VFile.  delete         This value is
	// only written, and is used to                delete the frozen VFile.
	// Writing this value                will cause this entry to be removed from
	// this                table.   transfer       This value can be both read and
	// written.                When read it means that the VFile is in the
	// process of being transferred. When written, it                initiates a
	// transfer for the VFile.  abortTransfer  This value can only be written, and
	// is used                to abort an ongoing transfer. The type is
	// CdcVFileMgmtCommand.
	CdcVFileMgmtCommand interface{}

	// The complete URL of the destination to which this VFile will be transferred
	// in the next attempt. The URL also includes the complete filename of the
	// remote file that will be created. When the default value of this object is
	// retained this VFile will be transferred to the URL   specified in
	// cdcFileXferConfPriUrl or cdcFileXferConfSecUrl, as the case may be.
	// However an application can specify a different URL, in which case the VFile
	// will be transferred to this new URL the next time transfer is initiated.
	// This object's value may be modified at any time. The type is string with
	// length: 0..255.
	CdcVFileMgmtXferURL interface{}

	// Indicates the status of the last completed transfer. The type is
	// CdcFileXferStatus.
	CdcVFileMgmtLastXferStatus interface{}

	// Indicates the URL of the destination to which the last (completed) transfer
	// was initiated. The type is string with length: 0..255.
	CdcVFileMgmtLastXferURL interface{}
}

CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry An entry in cdcVFileMgmtTable. Each entry corresponds to a frozen VFile. An entry is created in this table, whenever a VFile is frozen. An entry is removed from this table whenever a frozen VFile is deleted either because the retention period elapsed or because it was adminstratively deleted.

If the configuration specified in cdcVFileEntry is persisted across system/agent restarts AND the VFiles created as a result of that configuration are persisted across restarts, then this table must be populated with entries corresponding to those persisted VFiles. However any state related to an entry, like time to live etc. need not be maintained across restarts.

func (*CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand

type CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand string

CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand represents to abort an ongoing transfer.

const (
	CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand_idle CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand = "idle"

	CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand_delete_ CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand = "delete"

	CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand_transfer CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand = "transfer"

	CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand_abortTransfer CISCODATACOLLECTIONMIB_CdcVFileMgmtTable_CdcVFileMgmtEntry_CdcVFileMgmtCommand = "abortTransfer"
)

type CISCODATACOLLECTIONMIB_CdcVFileTable

type CISCODATACOLLECTIONMIB_CdcVFileTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the cdcVFileTable. Each entry contains application specified
	// configuration that is used to create  virtual files (VFile) and start data
	// collection operations.   A VFile is used to store data (values of base
	// object instances) as selected by entities called data groups. A data group
	// is defined in cdcDGTable.   An entry in this table is said to be
	// 'activated' when the corresponding instances of cdcVFileRowStatus is
	// 'active' AND cdcVFileOperStatus is 'enabled'. The value of sysUpTime.0 when
	// the condition evaluates to 'true' is called the activation time of the
	// entry. The activation time for each entry is maintained internally by the
	// agent. The type is slice of
	// CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry.
	CdcVFileEntry []*CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry
}

CISCODATACOLLECTIONMIB_CdcVFileTable A table for setting up VFiles for collecting data.

func (*CISCODATACOLLECTIONMIB_CdcVFileTable) GetEntityData

func (cdcVFileTable *CISCODATACOLLECTIONMIB_CdcVFileTable) GetEntityData() *types.CommonEntityData

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An arbitrary integer for uniquely identifying this
	// entry. When creating a row, the application should pick a random number.
	// If the configuration in this entry is persisted across system/agent
	// restarts then the same value of cdcVFileIndex must be assigned to this
	// entry after the restart. The type is interface{} with range: 1..4294967295.
	CdcVFileIndex interface{}

	// The base-name of the VFiles (created by data collection operations
	// corresponding to this entry) into which data is to be collected.   When a
	// VFile is created, it's full name is obtained by the concatentation of a
	// suffix to this value. The suffix will be chosen by the agent such that the
	// VFiles created for this entry have unique names. For e.g. the suffix could
	// be a string representation of the date and time when the VFile was created.
	// If VFiles are to be placed in the agent's local filesystem (provided the
	// agent supports it) then this value should also contain the absolute path of
	// the location as a prefix to the base name.  An agent will respond with
	// inconsistentValue to a management set operation which attempts to modify
	// the value of this object to the same value as already held by another
	// instance of cdcVFileName, or wrongValue if the new value  is invalid for
	// use as a file name on the local file  system (e.g., many file systems do
	// not support white  space embedded in file names).  This object's value may
	// be modified at any time. However the new name will be used only when the
	// next VFile is created for this entry. The type is string with length:
	// 0..255.
	CdcVFileName interface{}

	// A string that can be used for administrative purposes.  This object's value
	// may be modified at any time. The type is string.
	CdcVFileDescription interface{}

	// An object for controlling collection of data.  'idle'            Indicates
	// that no command is in progress.  'swapToNewFile'   When written, the
	// current VFile is frozen,                   and a new VFile is created for
	// collecting                   data. 		   If the data collection mode is
	// automatic                   (see cdcVFileCollectMode), then the current
	// collection interval is stopped and a new                   collection
	// interval is started  		   (see cdcVFileCollectPeriod).
	// 'collectNow'      When written, base object values for
	// all associated data groups are fetched                    and stored into
	// the current VFile. This                   value can only be written when
	// the                   collection mode is 'manual' (see
	// cdcVFileCollectMode). The type is CdcVFileCommand.
	CdcVFileCommand interface{}

	// The maximum size of a VFile.   The agent maintains an internal counter for
	// each cdcVFileEntry. This counter counts the number of consecutive times the
	// size of a VFile has exceeded the value of this object. When the value of
	// this counter exceeds the value of cdcVFileMaxSizeHitsLimit, this entry is
	// moved to the 'error' state (see cdcVFileOperStatus). However if the value
	// of cdcVFileMaxSizeHitsLimit is not exceeded, then the current VFile is
	// frozen, and a new VFile is created for data collection.  If the data
	// collection mode is automatic (see cdcVFileCollectMode), then the current
	// collection interval is stopped and a new collection interval is started.
	// This object's value may be modified at any time. The new size limit MUST be
	// checked against the size of the current VFile at the time of modification,
	// and appropriate action taken. The type is interface{} with range:
	// 512..4294967295. Units are bytes.
	CdcVFileMaxSize interface{}

	// The size of the current VFile. The type is interface{} with range:
	// 0..4294967295. Units are bytes.
	CdcVFileCurrentSize interface{}

	// The format in which data is stored into the current VFile.  This object's
	// value cannot be modified while the entry is in the 'activated' state. The
	// type is CdcFileFormat.
	CdcVFileFormat interface{}

	// Determines the mode of data collection.  'auto'         Data is
	// periodically fetched for all data                groups associated with
	// this entry. This is                done at data group specific periodic
	// intervals                (cdcDGPollPeriod).                The data thus
	// collected, is formatted and                stored into the current VFile.
	// In addition at regular intervals (see                cdcVFileCollectPeriod)
	// a new VFile                 is created to store data, and the current
	// VFile is frozen and transferred.  'manual'       Data for all data groups
	// is fetched and                collected into the current VFile only when
	// cdcVFileCommand is set to 'collectNow'.   This object's value cannot be
	// modified while the entry is in the 'activated' state. The type is
	// CdcVFileCollectMode.
	CdcVFileCollectMode interface{}

	// Specifies the period of a collection interval. The value of this object is
	// used only when the data collection mode is  automatic (see
	// cdcVFileCollectMode).  A periodic timer (one per entry) is started when
	// this entry is 'activated'. The time at which this entry is 'activated' is
	// called the 'activation time' for this entry, and is internally maintained
	// by the agent.  When this periodic timer expires, the current VFile is
	// frozen and a new VFile is created for data collection.  Transfer is then
	// initiated for the frozen VFile.   In addition, the internally maintained
	// counter for counting the number of consecutive times the size of a VFile
	// has exceeded the maximum limit, is reset to zero. (See cdcVFileMaxSize)
	// This object's value may be modified at any time, and the  new value takes
	// effect immediately. i.e setting a new  value can cause the current
	// collection interval to terminate  and a new collection interval to start.
	// The type is interface{} with range: 60..604800. Units are seconds.
	CdcVFileCollectionPeriod interface{}

	// The time for which a frozen VFile is retained by the agent. When a VFile is
	// frozen, a timer (one per frozen VFile) is started to keep track of the
	// retention period for the  VFile. Once this timer expires, the VFile is
	// deleted. Till the expiry of the retention period, information  about frozen
	// VFiles is maintained in  cdcVFileMgmtTable.  This object's value may be
	// modified at any time, however the new value will take effect only for new
	// frozen VFiles. The type is interface{} with range: 60..86400. Units are
	// seconds.
	CdcVFileRetentionPeriod interface{}

	// A control object to indicate the administratively desired state of data
	// collection for this entry. On setting the value to 'disabled' data
	// collection operations for this  entry are stopped, the current VFile is
	// frozen and it's  transfer is initiated.   Modifying the value of
	// cdcVFileAdminStatus to 'disabled' does not remove or change the current
	// configuration as represented by the active rows in this table. The type is
	// CdcVFileAdminStatus.
	CdcVFileAdminStatus interface{}

	// A status object to indicate the operational state of collection for this
	// entry.  When the value of cdcVFileAdminStatus is modified to be 'enabled',
	// the value of this object will change to 'enabled' providing it is possible
	// to begin collecting data. If at any point of time data cannot be collected
	// because of some error, then the value of this object is changed to 'error'
	// and all collection operations stop, as if cdcVFileAdminStatus has been set
	// to 'disabled'. More information about the nature of the error can be
	// obtained by retrieving the value of cdcVFileErrorCode.   When the value of
	// cdcVFileAdminStatus is modified to be 'disabled', the value of this object
	// will change to 'disabled' and data collection operations are stopped for
	// this entry. The type is CdcVFileOperStatus.
	CdcVFileOperStatus interface{}

	// A value indicating the type of error that has occurred during data
	// collection operations for this entry.  noError                The value is
	// 'noError' when                        the corresponding value of
	// cdcVFileOperStatus is not 'error'.  otherError             Any error other
	// than one of the                         following listed errors.  noSpace
	// There is no space left to write into                        the current
	// VFile.   openError              Could not open VFile for writing. One
	// possible reason could be the existence                        of another
	// file by the same name in                        the agent's filesystem.
	// tooSmallMaxSize        Indicates that cdcVFileMaxSize is
	// too small for data collection. The                         cdcVFileMaxSize
	// configured for this                        VFile is not sufficient even to
	// hold                         the data collected in one poll.
	// tooManyMaxSizeHits     Indicates that data collection
	// operations are stopped because                        the value of
	// cdcVFileMaxSizeHitsLimit                        has been exceeded.
	// noResource             Some kind of resource was unavailable
	// while collecting data. For                        e.g. unavailability of
	// dynamic memory. The type is CdcVFileErrorCode.
	CdcVFileErrorCode interface{}

	// When set to 'true', cdcVFileCollectionError notification will be sent out
	// in the event of a data collection error. The type is bool.
	CdcVFileCollectionErrorEnable interface{}

	// The status of this conceptual row.  A valid cdcVFileName is only mandatory
	// object for setting this object to 'active'. But collection of data in to
	// active vfile starts only on setting cdcVFileAdminStatus  to 'enabled'.
	// Setting this object to 'destroy' stops all data collection operations for
	// this entry, deletes all VFiles and removes this entry from cdcVFileTable.
	// The type is RowStatus.
	CdcVFileRowStatus interface{}
}

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry An entry in the cdcVFileTable. Each entry contains application specified configuration that is used to create

virtual files (VFile) and start data collection operations.

A VFile is used to store data (values of base object

instances) as selected by entities called data groups. A data group is defined in cdcDGTable.

An entry in this table is said to be 'activated' when the corresponding instances of cdcVFileRowStatus is 'active' AND cdcVFileOperStatus is 'enabled'. The value of sysUpTime.0 when the condition evaluates to 'true' is called the activation time of the entry. The activation time for each entry is maintained internally by the agent.

func (*CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry) GetEntityData

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus string

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus represents by the active rows in this table.

const (
	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus_enabled CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus = "enabled"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus_disabled CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileAdminStatus = "disabled"
)

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode string

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode represents is in the 'activated' state.

const (
	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode_auto CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode = "auto"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode_manual CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCollectMode = "manual"
)

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand string

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand represents cdcVFileCollectMode).

const (
	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand_idle CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand = "idle"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand_swapToNewFile CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand = "swapToNewFile"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand_collectNow CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileCommand = "collectNow"
)

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode string

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode represents e.g. unavailability of dynamic memory.

const (
	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_noError CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "noError"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_otherError CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "otherError"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_noSpace CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "noSpace"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_openError CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "openError"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_tooSmallMaxSize CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "tooSmallMaxSize"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_tooManyMaxSizeHits CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "tooManyMaxSizeHits"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode_noResource CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileErrorCode = "noResource"
)

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus

type CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus string

CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus represents this entry.

const (
	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus_enabled CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus = "enabled"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus_disabled CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus = "disabled"

	CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus_error_ CISCODATACOLLECTIONMIB_CdcVFileTable_CdcVFileEntry_CdcVFileOperStatus = "error"
)

type CdcFileFormat

type CdcFileFormat string

CdcFileFormat represents immediately precedes the next tag or the end of file.

const (
	CdcFileFormat_cdcBulkASCII CdcFileFormat = "cdcBulkASCII"

	CdcFileFormat_cdcBulkBinary CdcFileFormat = "cdcBulkBinary"

	CdcFileFormat_cdcSchemaASCII CdcFileFormat = "cdcSchemaASCII"
)

type CdcFileXferStatus

type CdcFileXferStatus string

CdcFileXferStatus represents of FTP(File Transfer Protocol).

const (
	CdcFileXferStatus_notStarted CdcFileXferStatus = "notStarted"

	CdcFileXferStatus_success CdcFileXferStatus = "success"

	CdcFileXferStatus_aborted CdcFileXferStatus = "aborted"

	CdcFileXferStatus_fileOpenFailRemote CdcFileXferStatus = "fileOpenFailRemote"

	CdcFileXferStatus_badDomainName CdcFileXferStatus = "badDomainName"

	CdcFileXferStatus_unreachableIpAddress CdcFileXferStatus = "unreachableIpAddress"

	CdcFileXferStatus_networkFailed CdcFileXferStatus = "networkFailed"

	CdcFileXferStatus_fileWriteFailed CdcFileXferStatus = "fileWriteFailed"

	CdcFileXferStatus_authFailed CdcFileXferStatus = "authFailed"
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL