bridge_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The Bridge MIB module for managing devices that support IEEE 802.1D.

Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type BRIDGEMIB 

type BRIDGEMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	Dot1dBase BRIDGEMIB_Dot1dBase

	Dot1dStp BRIDGEMIB_Dot1dStp

	Dot1dTp BRIDGEMIB_Dot1dTp

	// A table that contains generic information about every port that is
	// associated with this bridge.  Transparent, source-route, and srt ports are
	// included.
	Dot1dBasePortTable BRIDGEMIB_Dot1dBasePortTable

	// A table that contains port-specific information for the Spanning Tree
	// Protocol.
	Dot1dStpPortTable BRIDGEMIB_Dot1dStpPortTable

	// A table that contains information about unicast entries for which the
	// bridge has forwarding and/or filtering information.  This information is
	// used by the transparent bridging function in determining how to propagate a
	// received frame.
	Dot1dTpFdbTable BRIDGEMIB_Dot1dTpFdbTable

	// A table that contains information about every port that is associated with
	// this transparent bridge.
	Dot1dTpPortTable BRIDGEMIB_Dot1dTpPortTable

	// A table containing filtering information configured into the bridge by
	// (local or network) management specifying the set of ports to which frames
	// received from specific ports and containing specific destination addresses
	// are allowed to be forwarded.  The value of zero in this table, as the port
	// number from which frames with a specific destination address are received,
	// is used to specify all ports for which there is no specific entry in this
	// table for that particular destination address.  Entries are valid for
	// unicast and for group/broadcast addresses.
	Dot1dStaticTable BRIDGEMIB_Dot1dStaticTable
}

BRIDGEMIB

func (*BRIDGEMIB) GetEntityData 

func (bRIDGEMIB *BRIDGEMIB) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dBase 

type BRIDGEMIB_Dot1dBase struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The MAC address used by this bridge when it must be referred to in a unique
	// fashion.  It is recommended that this be the numerically smallest MAC
	// address of all ports that belong to this bridge.  However, it is only
	// required to be unique.  When concatenated with dot1dStpPriority, a unique
	// BridgeIdentifier is formed, which is used in the Spanning Tree Protocol.
	// The type is string with pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot1dBaseBridgeAddress interface{}

	// The number of ports controlled by this bridging entity. The type is
	// interface{} with range: -2147483648..2147483647. Units are ports.
	Dot1dBaseNumPorts interface{}

	// Indicates what type of bridging this bridge can perform.  If a bridge is
	// actually performing a certain type of bridging, this will be indicated by
	// entries in the port table for the given type. The type is Dot1dBaseType.
	Dot1dBaseType interface{}
}

BRIDGEMIB_Dot1dBase

func (*BRIDGEMIB_Dot1dBase) GetEntityData 

func (dot1dBase *BRIDGEMIB_Dot1dBase) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dBasePortTable 

type BRIDGEMIB_Dot1dBasePortTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of information for each port of the bridge. The type is slice of
	// BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry.
	Dot1dBasePortEntry []*BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry
}

BRIDGEMIB_Dot1dBasePortTable A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.

func (*BRIDGEMIB_Dot1dBasePortTable) GetEntityData 

func (dot1dBasePortTable *BRIDGEMIB_Dot1dBasePortTable) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry 

type BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The port number of the port for which this entry
	// contains bridge management information. The type is interface{} with range:
	// 1..65535.
	Dot1dBasePort interface{}

	// The value of the instance of the ifIndex object, defined in IF-MIB, for the
	// interface corresponding to this port. The type is interface{} with range:
	// 1..2147483647.
	Dot1dBasePortIfIndex interface{}

	// For a port that (potentially) has the same value of dot1dBasePortIfIndex as
	// another port on the same bridge. This object contains the name of an object
	// instance unique to this port.  For example, in the case where multiple
	// ports correspond one-to-one with multiple X.25 virtual circuits, this value
	// might identify an (e.g., the first) object instance associated with the
	// X.25 virtual circuit corresponding to this port.  For a port which has a
	// unique value of dot1dBasePortIfIndex, this object can have the value { 0 0
	// }. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	Dot1dBasePortCircuit interface{}

	// The number of frames discarded by this port due to excessive transit delay
	// through the bridge.  It is incremented by both transparent and source route
	// bridges. The type is interface{} with range: 0..4294967295.
	Dot1dBasePortDelayExceededDiscards interface{}

	// The number of frames discarded by this port due to an excessive size.  It
	// is incremented by both transparent and source route bridges. The type is
	// interface{} with range: 0..4294967295.
	Dot1dBasePortMtuExceededDiscards interface{}

	// Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a
	// per-port basis, that are implemented by this device, and that are
	// manageable through this MIB.  dot1qDot1qTagging(0), -- supports 802.1Q VLAN
	// tagging of                       -- frames and GVRP.
	// dot1qConfigurableAcceptableFrameTypes(1),                       -- allows
	// modified values of                       -- dot1qPortAcceptableFrameTypes.
	// dot1qIngressFiltering(2)                       -- supports the discarding
	// of any                       -- frame received on a Port whose
	// -- VLAN classification does not                       -- include that Port
	// in its Member                       -- set. The type is map[string]bool.
	Dot1dPortCapabilities interface{}

	// The default ingress User Priority for this port.  This only has effect on
	// media, such as Ethernet, that do not support native User Priority.  The
	// value of this object MUST be retained across reinitializations of the
	// management system. The type is interface{} with range: 0..7.
	Dot1dPortDefaultUserPriority interface{}

	// The number of egress traffic classes supported on this port.  This object
	// may optionally be read-only.  The value of this object MUST be retained
	// across reinitializations of the management system. The type is interface{}
	// with range: 1..8.
	Dot1dPortNumTrafficClasses interface{}

	// The GARP Join time, in centiseconds.  The value of this object MUST be
	// retained across reinitializations of the management system. The type is
	// interface{} with range: 0..2147483647.
	Dot1dPortGarpJoinTime interface{}

	// The GARP Leave time, in centiseconds.  The value of this object MUST be
	// retained across reinitializations of the management system. The type is
	// interface{} with range: 0..2147483647.
	Dot1dPortGarpLeaveTime interface{}

	// The GARP LeaveAll time, in centiseconds.  The value of this object MUST be
	// retained across reinitializations of the management system. The type is
	// interface{} with range: 0..2147483647.
	Dot1dPortGarpLeaveAllTime interface{}

	// The administrative state of GMRP operation on this port.  The value
	// enabled(1) indicates that GMRP is enabled on this port in all VLANs as long
	// as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates
	// that GMRP is disabled on this port in all VLANs: any GMRP packets received
	// will be silently discarded, and no GMRP registrations will be propagated
	// from other ports.  Setting this to a value of enabled(1) will be stored by
	// the agent but will only take effect on the GMRP protocol operation if
	// dot1dGmrpStatus also indicates the value enabled(1).  This object affects
	// all GMRP Applicant and Registrar state machines on this port.  A transition
	// from disabled(2) to enabled(1) will cause a reset of all GMRP state
	// machines on this port.  The value of this object MUST be retained across
	// reinitializations of the management system. The type is EnabledStatus.
	Dot1dPortGmrpStatus interface{}

	// The total number of failed GMRP registrations, for any reason, in all
	// VLANs, on this port. The type is interface{} with range: 0..4294967295.
	Dot1dPortGmrpFailedRegistrations interface{}

	// The Source MAC Address of the last GMRP message received on this port. The
	// type is string with pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot1dPortGmrpLastPduOrigin interface{}

	// The state of Restricted Group Registration on this port. If the value of
	// this control is true(1), then creation of a new dynamic entry is permitted
	// only if there is a Static Filtering Entry for the VLAN concerned, in which
	// the Registrar Administrative Control value is Normal Registration.  The
	// value of this object MUST be retained across reinitializations of the
	// management system. The type is bool.
	Dot1dPortRestrictedGroupRegistration interface{}

	// The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames
	// received on this port.  The value of this object MUST be retained across
	// reinitializations of the management system. The type is interface{} with
	// range: 0..4294967295.
	Dot1qPvid interface{}

	// When this is admitOnlyVlanTagged(2), the device will discard untagged
	// frames or Priority-Tagged frames received on this port.  When admitAll(1),
	// untagged frames or Priority-Tagged frames received on this port will be
	// accepted and assigned to a VID based on the PVID and VID Set for this port.
	// This control does not affect VLAN-independent Bridge Protocol Data Unit
	// (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP).  It does
	// affect VLAN- dependent BPDU frames, such as GMRP.  The value of this object
	// MUST be retained across reinitializations of the management system. The
	// type is Dot1qPortAcceptableFrameTypes.
	Dot1qPortAcceptableFrameTypes interface{}

	// When this is true(1), the device will discard incoming frames for VLANs
	// that do not include this Port in its  Member set.  When false(2), the port
	// will accept all incoming frames.  This control does not affect
	// VLAN-independent BPDU frames, such as GVRP and STP.  It does affect VLAN-
	// dependent BPDU frames, such as GMRP.  The value of this object MUST be
	// retained across reinitializations of the management system. The type is
	// bool.
	Dot1qPortIngressFiltering interface{}

	// The state of GVRP operation on this port.  The value enabled(1) indicates
	// that GVRP is enabled on this port, as long as dot1qGvrpStatus is also
	// enabled for this device.  When disabled(2) but dot1qGvrpStatus is still
	// enabled for the device, GVRP is disabled on this port: any GVRP packets
	// received will be silently discarded, and no GVRP registrations will be
	// propagated from other ports.  This object affects all GVRP Applicant and
	// Registrar state machines on this port.  A transition from disabled(2) to
	// enabled(1) will cause a reset of all GVRP state machines on this port.  The
	// value of this object MUST be retained across reinitializations of the
	// management system. The type is EnabledStatus.
	Dot1qPortGvrpStatus interface{}

	// The total number of failed GVRP registrations, for any reason, on this
	// port. The type is interface{} with range: 0..4294967295.
	Dot1qPortGvrpFailedRegistrations interface{}

	// The Source MAC Address of the last GVRP message received on this port. The
	// type is string with pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot1qPortGvrpLastPduOrigin interface{}

	// The state of Restricted VLAN Registration on this port. If the value of
	// this control is true(1), then creation of a new dynamic VLAN entry is
	// permitted only if there is a Static VLAN Registration Entry for the VLAN
	// concerned, in which the Registrar Administrative Control value for this
	// port is Normal Registration.  The value of this object MUST be retained
	// across reinitializations of the management system. The type is bool.
	Dot1qPortRestrictedVlanRegistration interface{}
}

BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry A list of information for each port of the bridge.

func (*BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry) GetEntityData 

func (dot1dBasePortEntry *BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes 

type BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes string

BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes represents reinitializations of the management system. 

const (
	BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes_admitAll BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes = "admitAll"

	BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes_admitOnlyVlanTagged BRIDGEMIB_Dot1dBasePortTable_Dot1dBasePortEntry_Dot1qPortAcceptableFrameTypes = "admitOnlyVlanTagged"
)

type BRIDGEMIB_Dot1dBase_Dot1dBaseType 

type BRIDGEMIB_Dot1dBase_Dot1dBaseType string

BRIDGEMIB_Dot1dBase_Dot1dBaseType represents entries in the port table for the given type. 

const (
	BRIDGEMIB_Dot1dBase_Dot1dBaseType_unknown BRIDGEMIB_Dot1dBase_Dot1dBaseType = "unknown"

	BRIDGEMIB_Dot1dBase_Dot1dBaseType_transparent_only BRIDGEMIB_Dot1dBase_Dot1dBaseType = "transparent-only"

	BRIDGEMIB_Dot1dBase_Dot1dBaseType_sourceroute_only BRIDGEMIB_Dot1dBase_Dot1dBaseType = "sourceroute-only"

	BRIDGEMIB_Dot1dBase_Dot1dBaseType_srt BRIDGEMIB_Dot1dBase_Dot1dBaseType = "srt"
)

type BRIDGEMIB_Dot1dStaticTable 

type BRIDGEMIB_Dot1dStaticTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Filtering information configured into the bridge by (local or network)
	// management specifying the set of ports to which frames received from a
	// specific port and containing a specific destination address are allowed to
	// be forwarded. The type is slice of
	// BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry.
	Dot1dStaticEntry []*BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry
}

BRIDGEMIB_Dot1dStaticTable A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table, as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.

func (*BRIDGEMIB_Dot1dStaticTable) GetEntityData 

func (dot1dStaticTable *BRIDGEMIB_Dot1dStaticTable) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry 

type BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The destination MAC address in a frame to which
	// this entry's filtering information applies.  This object can take the value
	// of a unicast address, a group address, or the broadcast address. The type
	// is string with pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot1dStaticAddress interface{}

	// This attribute is a key. Either the value '0', or the port number of the
	// port from which a frame must be received in order for this entry's
	// filtering information to apply.  A value of zero indicates that this entry
	// applies on all ports of the bridge for which there is no other applicable
	// entry. The type is interface{} with range: 0..65535.
	Dot1dStaticReceivePort interface{}

	// The set of ports to which frames received from a specific port and destined
	// for a specific MAC address, are allowed to be forwarded.  Each octet within
	// the value of this object specifies a set of eight ports, with the first
	// octet specifying ports 1 through 8, the second octet specifying ports 9
	// through 16, etc.  Within each octet, the most significant bit represents
	// the lowest numbered port, and the least significant bit represents the
	// highest numbered port.  Thus, each port of the bridge is represented by a
	// single bit within the value of this object.  If that bit has a value of
	// '1', then that port is included in the set of ports; the port is not
	// included if its bit has a value of '0'.  (Note that the setting of the bit
	// corresponding to the port from which a frame is received is irrelevant.)
	// The default value of this object is a string of ones of appropriate length.
	// The value of this object may exceed the required minimum maximum message
	// size of some SNMP transport (484 bytes, in the case of SNMP over UDP, see
	// RFC 3417, section 3.2). SNMP engines on bridges supporting a large number
	// of ports must support appropriate maximum message sizes. The type is string
	// with length: 0..512.
	Dot1dStaticAllowedToGoTo interface{}

	// This object indicates the status of this entry. The default value is
	// permanent(3).     other(1) - this entry is currently in use but the
	// conditions under which it will remain so are         different from each of
	// the following values.     invalid(2) - writing this value to the object
	// removes the corresponding entry.     permanent(3) - this entry is currently
	// in use and         will remain so after the next reset of the
	// bridge.     deleteOnReset(4) - this entry is currently in use         and
	// will remain so until the next reset of the         bridge.
	// deleteOnTimeout(5) - this entry is currently in use         and will remain
	// so until it is aged out. The type is Dot1dStaticStatus.
	Dot1dStaticStatus interface{}
}

BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

func (*BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry) GetEntityData 

func (dot1dStaticEntry *BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus 

type BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus string

BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus represents and will remain so until it is aged out. 

const (
	BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus_other BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus = "other"

	BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus_invalid BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus = "invalid"

	BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus_permanent BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus = "permanent"

	BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus_deleteOnReset BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus = "deleteOnReset"

	BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus_deleteOnTimeout BRIDGEMIB_Dot1dStaticTable_Dot1dStaticEntry_Dot1dStaticStatus = "deleteOnTimeout"
)

type BRIDGEMIB_Dot1dStp 

type BRIDGEMIB_Dot1dStp struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An indication of what version of the Spanning Tree Protocol is being run.
	// The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree
	// protocol. IEEE 802.1D implementations will return 'ieee8021d(3)'. If future
	// versions of the IEEE Spanning Tree Protocol that are incompatible with the
	// current version are released a new value will be defined. The type is
	// Dot1dStpProtocolSpecification.
	Dot1dStpProtocolSpecification interface{}

	// The value of the write-able portion of the Bridge ID (i.e., the first two
	// octets of the (8 octet long) Bridge ID).  The other (last) 6 octets of the
	// Bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges
	// supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-61440, in
	// steps of 4096. The type is interface{} with range: 0..65535.
	Dot1dStpPriority interface{}

	// The time (in hundredths of a second) since the last time a topology change
	// was detected by the bridge entity. For RSTP, this reports the time since
	// the tcWhile timer for any port on this Bridge was nonzero. The type is
	// interface{} with range: 0..4294967295. Units are centi-seconds.
	Dot1dStpTimeSinceTopologyChange interface{}

	// The total number of topology changes detected by this bridge since the
	// management entity was last reset or initialized. The type is interface{}
	// with range: 0..4294967295.
	Dot1dStpTopChanges interface{}

	// The bridge identifier of the root of the spanning tree, as determined by
	// the Spanning Tree Protocol, as executed by this node.  This value is used
	// as the Root Identifier parameter in all Configuration Bridge PDUs
	// originated by this node. The type is string with length: 8..8.
	Dot1dStpDesignatedRoot interface{}

	// The cost of the path to the root as seen from this bridge. The type is
	// interface{} with range: -2147483648..2147483647.
	Dot1dStpRootCost interface{}

	// The port number of the port that offers the lowest cost path from this
	// bridge to the root bridge. The type is interface{} with range:
	// -2147483648..2147483647.
	Dot1dStpRootPort interface{}

	// The maximum age of Spanning Tree Protocol information learned from the
	// network on any port before it is discarded, in units of hundredths of a
	// second.  This is the actual value that this bridge is currently using. The
	// type is interface{} with range: -2147483648..2147483647. Units are
	// centi-seconds.
	Dot1dStpMaxAge interface{}

	// The amount of time between the transmission of Configuration bridge PDUs by
	// this node on any port when it is the root of the spanning tree, or trying
	// to become so, in units of hundredths of a second.  This is the actual value
	// that this bridge is currently using. The type is interface{} with range:
	// -2147483648..2147483647. Units are centi-seconds.
	Dot1dStpHelloTime interface{}

	// This time value determines the interval length during which no more than
	// two Configuration bridge PDUs shall be transmitted by this node, in units
	// of hundredths of a second. The type is interface{} with range:
	// -2147483648..2147483647. Units are centi-seconds.
	Dot1dStpHoldTime interface{}

	// This time value, measured in units of hundredths of a second, controls how
	// fast a port changes its spanning state when moving towards the Forwarding
	// state.  The value determines how long the port stays in each of the
	// Listening and Learning states, which precede the Forwarding state.  This
	// value is also used when a topology change has been detected and is
	// underway, to age all dynamic entries in the Forwarding Database. [Note that
	// this value is the one that this bridge is currently using, in contrast to
	// dot1dStpBridgeForwardDelay, which is the value that this bridge and all
	// others would start using if/when this bridge were to become the root.]. The
	// type is interface{} with range: -2147483648..2147483647. Units are
	// centi-seconds.
	Dot1dStpForwardDelay interface{}

	// The value that all bridges use for MaxAge when this bridge is acting as the
	// root.  Note that 802.1D-1998 specifies that the range for this parameter is
	// related to the value of dot1dStpBridgeHelloTime.  The granularity of this
	// timer is specified by 802.1D-1998 to be 1 second.  An agent may return a
	// badValue error if a set is attempted to a value that is not a whole number
	// of seconds. The type is interface{} with range: 600..4000. Units are
	// centi-seconds.
	Dot1dStpBridgeMaxAge interface{}

	// The value that all bridges use for HelloTime when this bridge is acting as
	// the root.  The granularity of this timer is specified by 802.1D-1998 to be
	// 1 second.  An agent may return a badValue error if a set is attempted  to a
	// value that is not a whole number of seconds. The type is interface{} with
	// range: 100..1000. Units are centi-seconds.
	Dot1dStpBridgeHelloTime interface{}

	// The value that all bridges use for ForwardDelay when this bridge is acting
	// as the root.  Note that 802.1D-1998 specifies that the range for this
	// parameter is related to the value of dot1dStpBridgeMaxAge.  The granularity
	// of this timer is specified by 802.1D-1998 to be 1 second.  An agent may
	// return a badValue error if a set is attempted to a value that is not a
	// whole number of seconds. The type is interface{} with range: 400..3000.
	// Units are centi-seconds.
	Dot1dStpBridgeForwardDelay interface{}
}

BRIDGEMIB_Dot1dStp

func (*BRIDGEMIB_Dot1dStp) GetEntityData 

func (dot1dStp *BRIDGEMIB_Dot1dStp) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dStpPortTable 

type BRIDGEMIB_Dot1dStpPortTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of information maintained by every port about the Spanning Tree
	// Protocol state for that port. The type is slice of
	// BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry.
	Dot1dStpPortEntry []*BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry
}

BRIDGEMIB_Dot1dStpPortTable A table that contains port-specific information for the Spanning Tree Protocol.

func (*BRIDGEMIB_Dot1dStpPortTable) GetEntityData 

func (dot1dStpPortTable *BRIDGEMIB_Dot1dStpPortTable) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry 

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The port number of the port for which this entry
	// contains Spanning Tree Protocol management information. The type is
	// interface{} with range: 1..65535.
	Dot1dStpPort interface{}

	// The value of the priority field that is contained in the first (in network
	// byte order) octet of the (2 octet long) Port ID.  The other octet of the
	// Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE
	// 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16. The
	// type is interface{} with range: 0..255.
	Dot1dStpPortPriority interface{}

	// The port's current state, as defined by application of the Spanning Tree
	// Protocol.  This state controls what action a port takes on reception of a
	// frame.  If the bridge has detected a port that is malfunctioning, it will
	// place that port into the broken(6) state.  For ports that are disabled (see
	// dot1dStpPortEnable), this object will have a value of disabled(1). The type
	// is Dot1dStpPortState.
	Dot1dStpPortState interface{}

	// The enabled/disabled status of the port. The type is Dot1dStpPortEnable.
	Dot1dStpPortEnable interface{}

	// The contribution of this port to the path cost of paths towards the
	// spanning tree root which include this port.  802.1D-1998 recommends that
	// the default value of this parameter be in inverse proportion to  the speed
	// of the attached LAN.  New implementations should support
	// dot1dStpPortPathCost32. If the port path costs exceeds the maximum value of
	// this object then this object should report the maximum value, namely 65535.
	// Applications should try to read the dot1dStpPortPathCost32 object if this
	// object reports the maximum value. The type is interface{} with range:
	// 1..65535.
	Dot1dStpPortPathCost interface{}

	// The unique Bridge Identifier of the Bridge recorded as the Root in the
	// Configuration BPDUs transmitted by the Designated Bridge for the segment to
	// which the port is attached. The type is string with length: 8..8.
	Dot1dStpPortDesignatedRoot interface{}

	// The path cost of the Designated Port of the segment connected to this port.
	// This value is compared to the Root Path Cost field in received bridge PDUs.
	// The type is interface{} with range: -2147483648..2147483647.
	Dot1dStpPortDesignatedCost interface{}

	// The Bridge Identifier of the bridge that this port considers to be the
	// Designated Bridge for this port's segment. The type is string with length:
	// 8..8.
	Dot1dStpPortDesignatedBridge interface{}

	// The Port Identifier of the port on the Designated Bridge for this port's
	// segment. The type is string with length: 2..2.
	Dot1dStpPortDesignatedPort interface{}

	// The number of times this port has transitioned from the Learning state to
	// the Forwarding state. The type is interface{} with range: 0..4294967295.
	Dot1dStpPortForwardTransitions interface{}

	// The contribution of this port to the path cost of paths towards the
	// spanning tree root which include this port.  802.1D-1998 recommends that
	// the default value of this parameter be in inverse proportion to the speed
	// of the attached LAN.  This object replaces dot1dStpPortPathCost to support
	// IEEE 802.1t. The type is interface{} with range: 1..200000000.
	Dot1dStpPortPathCost32 interface{}

	// The contribution of this port to the path cost (in 32 bits value) of paths
	// towards the spanning tree root which include this port.  This object is
	// used to configure the spanning tree port path cost in 32 bits value range
	// when the stpxSpanningTreePathCostOperMode is long(2).  If the
	// stpxSpanningTreePathCostOperMode is short(1), this  MIB object is not
	// instantiated. The type is interface{} with range: 0..4294967295.
	StpxLongStpPortPathCost interface{}
}

BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry A list of information maintained by every port about the Spanning Tree Protocol state for that port.

func (*BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry) GetEntityData 

func (dot1dStpPortEntry *BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable 

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable string

BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable represents The enabled/disabled status of the port. 

const (
	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable_enabled BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable = "enabled"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable_disabled BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortEnable = "disabled"
)

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState 

type BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState string

BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState represents object will have a value of disabled(1). 

const (
	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_disabled BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "disabled"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_blocking BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "blocking"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_listening BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "listening"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_learning BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "learning"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_forwarding BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "forwarding"

	BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState_broken BRIDGEMIB_Dot1dStpPortTable_Dot1dStpPortEntry_Dot1dStpPortState = "broken"
)

type BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification 

type BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification string

BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification represents are released a new value will be defined. 

const (
	BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification_unknown BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification = "unknown"

	BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification_decLb100 BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification = "decLb100"

	BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification_ieee8021d BRIDGEMIB_Dot1dStp_Dot1dStpProtocolSpecification = "ieee8021d"
)

type BRIDGEMIB_Dot1dTp 

type BRIDGEMIB_Dot1dTp struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The total number of Forwarding Database entries that have been or would
	// have been learned, but have been discarded due to a lack of storage space
	// in the Forwarding Database.  If this counter is increasing, it indicates
	// that the Forwarding Database is regularly becoming full (a condition that
	// has unpleasant performance effects on the subnetwork).  If this counter has
	// a significant value but is not presently increasing, it indicates that the
	// problem has been occurring but is not persistent. The type is interface{}
	// with range: 0..4294967295.
	Dot1dTpLearnedEntryDiscards interface{}

	// The timeout period in seconds for aging out dynamically-learned forwarding
	// information. 802.1D-1998 recommends a default of 300 seconds. The type is
	// interface{} with range: 10..1000000. Units are seconds.
	Dot1dTpAgingTime interface{}
}

BRIDGEMIB_Dot1dTp

func (*BRIDGEMIB_Dot1dTp) GetEntityData 

func (dot1dTp *BRIDGEMIB_Dot1dTp) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dTpFdbTable 

type BRIDGEMIB_Dot1dTpFdbTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a specific unicast MAC address for which the bridge has
	// some forwarding and/or filtering information. The type is slice of
	// BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry.
	Dot1dTpFdbEntry []*BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry
}

BRIDGEMIB_Dot1dTpFdbTable A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.

func (*BRIDGEMIB_Dot1dTpFdbTable) GetEntityData 

func (dot1dTpFdbTable *BRIDGEMIB_Dot1dTpFdbTable) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry 

type BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A unicast MAC address for which the bridge has
	// forwarding and/or filtering information. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	Dot1dTpFdbAddress interface{}

	// Either the value '0', or the port number of the port on which a frame
	// having a source address equal to the value of the corresponding instance of
	// dot1dTpFdbAddress has been seen.  A value of '0' indicates that the port
	// number has not been learned, but that the bridge does have some
	// forwarding/filtering information about this address (e.g., in the
	// dot1dStaticTable).  Implementors are encouraged to assign the port value to
	// this object whenever it is learned, even for addresses for which the
	// corresponding value of dot1dTpFdbStatus is not learned(3). The type is
	// interface{} with range: -2147483648..2147483647.
	Dot1dTpFdbPort interface{}

	// The status of this entry.  The meanings of the values are:     other(1) -
	// none of the following.  This would         include the case where some
	// other MIB object         (not the corresponding instance of
	// dot1dTpFdbPort, nor an entry in the         dot1dStaticTable) is being used
	// to determine if         and how frames addressed to the value of the
	// corresponding instance of dot1dTpFdbAddress are         being forwarded.
	// invalid(2) - this entry is no longer valid (e.g.,         it was learned
	// but has since aged out), but has         not yet been flushed from the
	// table.     learned(3) - the value of the corresponding instance         of
	// dot1dTpFdbPort was learned, and is being         used.     self(4) - the
	// value of the corresponding instance of         dot1dTpFdbAddress represents
	// one of the bridge's         addresses.  The corresponding instance of
	// dot1dTpFdbPort indicates which of the bridge's         ports has this
	// address.     mgmt(5) - the value of the corresponding instance of
	// dot1dTpFdbAddress is also the value of an         existing instance of
	// dot1dStaticAddress. The type is Dot1dTpFdbStatus.
	Dot1dTpFdbStatus interface{}
}

BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

func (*BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry) GetEntityData 

func (dot1dTpFdbEntry *BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus 

type BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus string

BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus represents existing instance of dot1dStaticAddress. 

const (
	BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus_other BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus = "other"

	BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus_invalid BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus = "invalid"

	BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus_learned BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus = "learned"

	BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus_self BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus = "self"

	BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus_mgmt BRIDGEMIB_Dot1dTpFdbTable_Dot1dTpFdbEntry_Dot1dTpFdbStatus = "mgmt"
)

type BRIDGEMIB_Dot1dTpPortTable 

type BRIDGEMIB_Dot1dTpPortTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of information for each port of a transparent bridge. The type is
	// slice of BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry.
	Dot1dTpPortEntry []*BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry
}

BRIDGEMIB_Dot1dTpPortTable A table that contains information about every port that is associated with this transparent bridge.

func (*BRIDGEMIB_Dot1dTpPortTable) GetEntityData 

func (dot1dTpPortTable *BRIDGEMIB_Dot1dTpPortTable) GetEntityData() *types.CommonEntityData

type BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry 

type BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The port number of the port for which this entry
	// contains Transparent bridging management information. The type is
	// interface{} with range: 1..65535.
	Dot1dTpPort interface{}

	// The maximum size of the INFO (non-MAC) field that  this port will receive
	// or transmit. The type is interface{} with range: -2147483648..2147483647.
	// Units are bytes.
	Dot1dTpPortMaxInfo interface{}

	// The number of frames that have been received by this port from its segment.
	// Note that a frame received on the interface corresponding to this port is
	// only counted by this object if and only if it is for a protocol being
	// processed by the local bridging function, including bridge management
	// frames. The type is interface{} with range: 0..4294967295. Units are
	// frames.
	Dot1dTpPortInFrames interface{}

	// The number of frames that have been transmitted by this port to its
	// segment.  Note that a frame transmitted on the interface corresponding to
	// this port is only counted by this object if and only if it is for a
	// protocol being processed by the local bridging function, including bridge
	// management frames. The type is interface{} with range: 0..4294967295. Units
	// are frames.
	Dot1dTpPortOutFrames interface{}

	// Count of received valid frames that were discarded (i.e., filtered) by the
	// Forwarding Process. The type is interface{} with range: 0..4294967295.
	// Units are frames.
	Dot1dTpPortInDiscards interface{}
}

BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry A list of information for each port of a transparent bridge.

func (*BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry) GetEntityData 

func (dot1dTpPortEntry *BRIDGEMIB_Dot1dTpPortTable_Dot1dTpPortEntry) GetEntityData() *types.CommonEntityData

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.