agent

package
v0.20200923.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 28, 2020 License: MIT Imports: 17 Imported by: 4

Documentation

Index

Constants

View Source 
const (
	// DefaultVNETCIDR is the default CIDR block for the VNET
	DefaultVNETCIDR = "10.0.0.0/8"
	// DefaultVNETCIDRIPv6 is the default IPv6 CIDR block for the VNET
	DefaultVNETCIDRIPv6 = "2001:1234:5678:9a00::/56"
	// DefaultInternalLbStaticIPOffset specifies the offset of the internal LoadBalancer's IP
	// address relative to the first consecutive Kubernetes static IP
	DefaultInternalLbStaticIPOffset = 10
	// NetworkPolicyNone is the string expression for the deprecated NetworkPolicy usage pattern "none"
	NetworkPolicyNone = "none"
	// NetworkPolicyCalico is the string expression for calico network policy config option
	NetworkPolicyCalico = "calico"
	// NetworkPolicyCilium is the string expression for cilium network policy config option
	NetworkPolicyCilium = "cilium"
	// NetworkPluginCilium is the string expression for cilium network plugin config option
	NetworkPluginCilium = NetworkPolicyCilium
	// NetworkPolicyAntrea is the string expression for antrea network policy config option
	NetworkPolicyAntrea = "antrea"
	// NetworkPolicyAzure is the string expression for Azure CNI network policy manager
	NetworkPolicyAzure = "azure"
	// NetworkPluginAzure is the string expression for Azure CNI plugin
	NetworkPluginAzure = "azure"
	// NetworkPluginKubenet is the string expression for kubenet network plugin
	NetworkPluginKubenet = "kubenet"
	// NetworkPluginFlannel is the string expression for flannel network plugin
	NetworkPluginFlannel = "flannel"
	// DefaultGeneratorCode specifies the source generator of the cluster template.
	DefaultGeneratorCode = "agentbaker"
	// DefaultKubernetesKubeletMaxPods is the max pods per kubelet
	DefaultKubernetesKubeletMaxPods = 110
	// DefaultMasterEtcdServerPort is the default etcd server port for Kubernetes master nodes
	DefaultMasterEtcdServerPort = 2380
	// DefaultMasterEtcdClientPort is the default etcd client port for Kubernetes master nodes
	DefaultMasterEtcdClientPort = 2379

	// BasicLoadBalancerSku is the string const for Azure Basic Load Balancer
	BasicLoadBalancerSku = "Basic"
	// StandardLoadBalancerSku is the string const for Azure Standard Load Balancer
	StandardLoadBalancerSku = "Standard"
)
View Source 
const (
	//DefaultExtensionsRootURL  Root URL for extensions
	DefaultExtensionsRootURL = "https://raw.githubusercontent.com/Azure/aks-engine/master/"
	// DefaultDockerEngineRepo for grabbing docker engine packages
	DefaultDockerEngineRepo = "https://download.docker.com/linux/ubuntu"
	// DefaultDockerComposeURL for grabbing docker images
	DefaultDockerComposeURL = "https://github.com/docker/compose/releases/download"
)
View Source 
const (
	// AADPodIdentityAddonName is the name of the aad-pod-identity addon deployment
	AADPodIdentityAddonName = "aad-pod-identity"
	// ACIConnectorAddonName is the name of the aci-connector addon deployment
	ACIConnectorAddonName = "aci-connector"
	// AppGwIngressAddonName appgw addon
	AppGwIngressAddonName = "appgw-ingress"
)
View Source 
const (
	//DefaultConfigurationScriptRootURL  Root URL for configuration script (used for script extension on RHEL)
	DefaultConfigurationScriptRootURL = "https://raw.githubusercontent.com/Azure/aks-engine/master/parts/"
)
View Source 
const (
	// DynamicKubeletConfigDir specifies the directory for dynamic kubelet to store configs
	DynamicKubeletConfigDir = "/var/lib/kubelet"
)

kubelet config

Variables

View Source 
var TranslatedKubeletConfigFlags map[string]bool = map[string]bool{
	"--address":                           true,
	"--anonymous-auth":                    true,
	"--client-ca-file":                    true,
	"--authentication-token-webhook":      true,
	"--authorization-mode":                true,
	"--pod-manifest-path":                 true,
	"--cluster-dns":                       true,
	"--cgroups-per-qos":                   true,
	"--tls-cert-file":                     true,
	"--tls-private-key-file":              true,
	"--tls-cipher-suites":                 true,
	"--cluster-domain":                    true,
	"--max-pods":                          true,
	"--eviction-hard":                     true,
	"--node-status-update-frequency":      true,
	"--image-gc-high-threshold":           true,
	"--image-gc-low-threshold":            true,
	"--event-qps":                         true,
	"--pod-max-pids":                      true,
	"--enforce-node-allocatable":          true,
	"--streaming-connection-idle-timeout": true,
	"--rotate-certificates":               true,
	"--read-only-port":                    true,
	"--feature-gates":                     true,
	"--protect-kernel-defaults":           true,
	"--resolv-conf":                       true,
	"--system-reserved":                   true,
	"--kube-reserved":                     true,
}

Functions

func GetCloudTargetEnv 

func GetCloudTargetEnv(location string) string

GetCloudTargetEnv determines and returns whether the region is a sovereign cloud which have their own data compliance regulations (China/Germany/USGov) or standard Azure public cloud

func GetOrderedKubeletConfigFlagString added in v0.0.1234 

func GetOrderedKubeletConfigFlagString(k *datamodel.KubernetesConfig, cs *datamodel.ContainerService, dynamicKubeletToggleEnabled bool) string

GetOrderedKubeletConfigFlagString returns an ordered string of key/val pairs copied from AKS-Engine and filter out flags that already translated to config file

func IsDynamicKubeletEnabled added in v0.20200716.2 

func IsDynamicKubeletEnabled(cs *datamodel.ContainerService, dynamicKubeletToggleEnabled bool) bool

IsDynamicKubeletEnabled get if dynamic kubelet is supported in AKS

func IsKubernetesVersionGe 

func IsKubernetesVersionGe(actualVersion, version string) bool

IsKubernetesVersionGe returns true if actualVersion is greater than or equal to version

func IsSgxEnabledSKU 

func IsSgxEnabledSKU(vmSize string) bool

IsSgxEnabledSKU determines if an VM SKU has SGX driver support

Types

type AKSKubeletConfiguration added in v0.20200716.1 

type AKSKubeletConfiguration struct {
	// Kind is a string value representing the REST resource this object represents.
	// Servers may infer this from the endpoint the client submits requests to.
	// Cannot be updated.
	// In CamelCase.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	Kind string `json:"kind,omitempty" protobuf:"bytes,1,opt,name=kind"`
	// APIVersion defines the versioned schema of this representation of an object.
	// Servers should convert recognized schemas to the latest internal value, and
	// may reject unrecognized values.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	// +optional
	APIVersion string `json:"apiVersion,omitempty" protobuf:"bytes,2,opt,name=apiVersion"`
	// staticPodPath is the path to the directory containing local (static) pods to
	// run, or the path to a single static pod file.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// the set of static pods specified at the new path may be different than the
	// ones the Kubelet initially started with, and this may disrupt your node.
	// Default: ""
	// +optional
	StaticPodPath string `json:"staticPodPath,omitempty"`
	// address is the IP address for the Kubelet to serve on (set to 0.0.0.0
	// for all interfaces).
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Default: "0.0.0.0"
	// +optional
	Address string `json:"address,omitempty"`
	// readOnlyPort is the read-only port for the Kubelet to serve on with
	// no authentication/authorization.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Default: 0 (disabled)
	// +optional
	ReadOnlyPort int32 `json:"readOnlyPort,omitempty"`
	// tlsCertFile is the file containing x509 Certificate for HTTPS. (CA cert,
	// if any, concatenated after server cert). If tlsCertFile and
	// tlsPrivateKeyFile are not provided, a self-signed certificate
	// and key are generated for the public address and saved to the directory
	// passed to the Kubelet's --cert-dir flag.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Default: ""
	// +optional
	TLSCertFile string `json:"tlsCertFile,omitempty"`
	// tlsPrivateKeyFile is the file containing x509 private key matching tlsCertFile
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Default: ""
	// +optional
	TLSPrivateKeyFile string `json:"tlsPrivateKeyFile,omitempty"`
	// TLSCipherSuites is the list of allowed cipher suites for the server.
	// Values are from tls package constants (https://golang.org/pkg/crypto/tls/#pkg-constants).
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Default: nil
	// +optional
	TLSCipherSuites []string `json:"tlsCipherSuites,omitempty"`
	// rotateCertificates enables client certificate rotation. The Kubelet will request a
	// new certificate from the certificates.k8s.io API. This requires an approver to approve the
	// certificate signing requests.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// disabling it may disrupt the Kubelet's ability to authenticate with the API server
	// after the current certificate expires.
	// Default: false
	// +optional
	RotateCertificates bool `json:"rotateCertificates,omitempty"`
	// authentication specifies how requests to the Kubelet's server are authenticated
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Defaults:
	//   anonymous:
	//     enabled: false
	//   webhook:
	//     enabled: true
	//     cacheTTL: "2m"
	// +optional
	Authentication KubeletAuthentication `json:"authentication"`
	// authorization specifies how requests to the Kubelet's server are authorized
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may disrupt components that interact with the Kubelet server.
	// Defaults:
	//   mode: Webhook
	//   webhook:
	//     cacheAuthorizedTTL: "5m"
	//     cacheUnauthorizedTTL: "30s"
	// +optional
	Authorization KubeletAuthorization `json:"authorization"`
	// eventRecordQPS is the maximum event creations per second. If 0, there
	// is no limit enforced.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may impact scalability by changing the amount of traffic produced by
	// event creations.
	// Default: 5
	// +optional
	EventRecordQPS int32 `json:"eventRecordQPS,omitempty"`
	// clusterDomain is the DNS domain for this cluster. If set, kubelet will
	// configure all containers to search this domain in addition to the
	// host's search domains.
	// Dynamic Kubelet Config (beta): Dynamically updating this field is not recommended,
	// as it should be kept in sync with the rest of the cluster.
	// Default: ""
	// +optional
	ClusterDomain string `json:"clusterDomain,omitempty"`
	// clusterDNS is a list of IP addresses for the cluster DNS server. If set,
	// kubelet will configure all containers to use this for DNS resolution
	// instead of the host's DNS servers.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// changes will only take effect on Pods created after the update. Draining
	// the node is recommended before changing this field.
	// Default: nil
	// +optional
	ClusterDNS []string `json:"clusterDNS,omitempty"`
	// streamingConnectionIdleTimeout is the maximum time a streaming connection
	// can be idle before the connection is automatically closed.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may impact components that rely on infrequent updates over streaming
	// connections to the Kubelet server.
	// Default: "4h"
	// +optional
	StreamingConnectionIdleTimeout Duration `json:"streamingConnectionIdleTimeout,omitempty"`
	// nodeStatusUpdateFrequency is the frequency that kubelet computes node
	// status. If node lease feature is not enabled, it is also the frequency that
	// kubelet posts node status to master.
	// Note: When node lease feature is not enabled, be cautious when changing the
	// constant, it must work with nodeMonitorGracePeriod in nodecontroller.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may impact node scalability, and also that the node controller's
	// nodeMonitorGracePeriod must be set to N*NodeStatusUpdateFrequency,
	// where N is the number of retries before the node controller marks
	// the node unhealthy.
	// Default: "10s"
	// +optional
	NodeStatusUpdateFrequency Duration `json:"nodeStatusUpdateFrequency,omitempty"`
	// imageGCHighThresholdPercent is the percent of disk usage after which
	// image garbage collection is always run. The percent is calculated as
	// this field value out of 100.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may trigger or delay garbage collection, and may change the image overhead
	// on the node.
	// Default: 85
	// +optional
	ImageGCHighThresholdPercent int32 `json:"imageGCHighThresholdPercent,omitempty"`
	// imageGCLowThresholdPercent is the percent of disk usage before which
	// image garbage collection is never run. Lowest disk usage to garbage
	// collect to. The percent is calculated as this field value out of 100.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may trigger or delay garbage collection, and may change the image overhead
	// on the node.
	// Default: 80
	// +optional
	ImageGCLowThresholdPercent int32 `json:"imageGCLowThresholdPercent,omitempty"`
	// Enable QoS based Cgroup hierarchy: top level cgroups for QoS Classes
	// And all Burstable and BestEffort pods are brought up under their
	// specific top level QoS cgroup.
	// Dynamic Kubelet Config (beta): This field should not be updated without a full node
	// reboot. It is safest to keep this value the same as the local config.
	// Default: true
	// +optional
	CgroupsPerQOS bool `json:"cgroupsPerQOS,omitempty"`
	// maxPods is the number of pods that can run on this Kubelet.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// changes may cause Pods to fail admission on Kubelet restart, and may change
	// the value reported in Node.Status.Capacity[v1.ResourcePods], thus affecting
	// future scheduling decisions. Increasing this value may also decrease performance,
	// as more Pods can be packed into a single node.
	// Default: 110
	// +optional
	MaxPods int32 `json:"maxPods,omitempty"`
	// PodPidsLimit is the maximum number of pids in any pod.
	// Requires the SupportPodPidsLimit feature gate to be enabled.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// lowering it may prevent container processes from forking after the change.
	// Default: -1
	// +optional
	PodPidsLimit int64 `json:"podPidsLimit,omitempty"`
	// ResolverConfig is the resolver configuration file used as the basis
	// for the container DNS resolution configuration.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// changes will only take effect on Pods created after the update. Draining
	// the node is recommended before changing this field.
	// Default: "/etc/resolv.conf"
	// +optional
	ResolverConfig string `json:"resolvConf,omitempty"`
	// Map of signal names to quantities that defines hard eviction thresholds. For example: {"memory.available": "300Mi"}.
	// To explicitly disable, pass a 0% or 100% threshold on an arbitrary resource.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may trigger or delay Pod evictions.
	// Default:
	//   memory.available:  "100Mi"
	//   nodefs.available:  "10%"
	//   nodefs.inodesFree: "5%"
	//   imagefs.available: "15%"
	// +optional
	EvictionHard map[string]string `json:"evictionHard,omitempty"`
	// protectKernelDefaults, if true, causes the Kubelet to error if kernel
	// flags are not as it expects. Otherwise the Kubelet will attempt to modify
	// kernel flags to match its expectation.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// enabling it may cause the Kubelet to crash-loop if the Kernel is not configured as
	// Kubelet expects.
	// Default: false
	// +optional
	ProtectKernelDefaults bool `json:"protectKernelDefaults,omitempty"`
	// featureGates is a map of feature names to bools that enable or disable alpha/experimental
	// features. This field modifies piecemeal the built-in default values from
	// "k8s.io/kubernetes/pkg/features/kube_features.go".
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider the
	// documentation for the features you are enabling or disabling. While we
	// encourage feature developers to make it possible to dynamically enable
	// and disable features, some changes may require node reboots, and some
	// features may require careful coordination to retroactively disable.
	// Default: nil
	// +optional
	FeatureGates map[string]bool `json:"featureGates,omitempty"`

	// systemReserved is a set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G)
	// pairs that describe resources reserved for non-kubernetes components.
	// Currently only cpu and memory are supported.
	// See http://kubernetes.io/docs/user-guide/compute-resources for more detail.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may not be possible to increase the reserved resources, because this
	// requires resizing cgroups. Always look for a NodeAllocatableEnforced event
	// after updating this field to ensure that the update was successful.
	// Default: nil
	// +optional
	SystemReserved map[string]string `json:"systemReserved,omitempty"`
	// A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs
	// that describe resources reserved for kubernetes system components.
	// Currently cpu, memory and local storage for root file system are supported.
	// See http://kubernetes.io/docs/user-guide/compute-resources for more detail.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// it may not be possible to increase the reserved resources, because this
	// requires resizing cgroups. Always look for a NodeAllocatableEnforced event
	// after updating this field to ensure that the update was successful.
	// Default: nil
	// +optional
	KubeReserved map[string]string `json:"kubeReserved,omitempty"`
	// This flag specifies the various Node Allocatable enforcements that Kubelet needs to perform.
	// This flag accepts a list of options. Acceptable options are `none`, `pods`, `system-reserved` & `kube-reserved`.
	// If `none` is specified, no other options may be specified.
	// Refer to [Node Allocatable](https://git.k8s.io/community/contributors/design-proposals/node/node-allocatable.md) doc for more information.
	// Dynamic Kubelet Config (beta): If dynamically updating this field, consider that
	// removing enforcements may reduce the stability of the node. Alternatively, adding
	// enforcements may reduce the stability of components which were using more than
	// the reserved amount of resources; for example, enforcing kube-reserved may cause
	// Kubelets to OOM if it uses more than the reserved resources, and enforcing system-reserved
	// may cause system daemons to OOM if they use more than the reserved resources.
	// Default: ["pods"]
	// +optional
	EnforceNodeAllocatable []string `json:"enforceNodeAllocatable,omitempty"`
}

AKSKubeletConfiguration contains the configuration for the Kubelet that AKS set this is a subset of KubeletConfiguration defined in https://github.com/kubernetes/kubernetes/blob/master/staging/src/k8s.io/kubelet/config/v1beta1/types.go changed metav1.Duration to Duration and pointers to values to simplify translation

type Duration added in v0.20200716.1 

type Duration string

type K8sComponents added in v0.20200921.0 

type K8sComponents struct {
	// Full path to the "pause" image. Used for --pod-infra-container-image
	// For example: "mcr.microsoft.com/oss/kubernetes/pause:1.3.1"
	PodInfraContainerImageURL string

	// Full path to the hyperkube image.
	// For example: "mcr.microsoft.com/hyperkube-amd64:v1.16.13"
	HyperkubeImageURL string

	// Full path to the Windows package (windowszip) to use.
	// For example: https://acs-mirror.azureedge.net/kubernetes/v1.17.8/windowszip/v1.17.8-1int.zip
	WindowsPackageURL string
}

type KeyVaultID 

type KeyVaultID struct {
	ID string `json:"id"`
}

KeyVaultID represents a KeyVault instance on Azure

type KeyVaultRef 

type KeyVaultRef struct {
	KeyVault      KeyVaultID `json:"keyVault"`
	SecretName    string     `json:"secretName"`
	SecretVersion string     `json:"secretVersion,omitempty"`
}

KeyVaultRef represents a reference to KeyVault instance on Azure

type KubeletAnonymousAuthentication added in v0.20200716.1 

type KubeletAnonymousAuthentication struct {
	// enabled allows anonymous requests to the kubelet server.
	// Requests that are not rejected by another authentication method are treated as anonymous requests.
	// Anonymous requests have a username of system:anonymous, and a group name of system:unauthenticated.
	// +optional
	Enabled bool `json:"enabled,omitempty"`
}

type KubeletAuthentication added in v0.20200716.1 

type KubeletAuthentication struct {
	// x509 contains settings related to x509 client certificate authentication
	// +optional
	X509 KubeletX509Authentication `json:"x509"`
	// webhook contains settings related to webhook bearer token authentication
	// +optional
	Webhook KubeletWebhookAuthentication `json:"webhook"`
	// anonymous contains settings related to anonymous authentication
	// +optional
	Anonymous KubeletAnonymousAuthentication `json:"anonymous"`
}

below are copied from Kubernetes

type KubeletAuthorization added in v0.20200716.1 

type KubeletAuthorization struct {
	// mode is the authorization mode to apply to requests to the kubelet server.
	// Valid values are AlwaysAllow and Webhook.
	// Webhook mode uses the SubjectAccessReview API to determine authorization.
	// +optional
	Mode KubeletAuthorizationMode `json:"mode,omitempty"`

	// webhook contains settings related to Webhook authorization.
	// +optional
	Webhook KubeletWebhookAuthorization `json:"webhook"`
}

type KubeletAuthorizationMode added in v0.20200716.1 

type KubeletAuthorizationMode string

type KubeletWebhookAuthentication added in v0.20200716.1 

type KubeletWebhookAuthentication struct {
	// enabled allows bearer token authentication backed by the tokenreviews.authentication.k8s.io API
	// +optional
	Enabled bool `json:"enabled,omitempty"`
	// cacheTTL enables caching of authentication results
	// +optional
	CacheTTL Duration `json:"cacheTTL,omitempty"`
}

type KubeletWebhookAuthorization added in v0.20200716.1 

type KubeletWebhookAuthorization struct {
	// cacheAuthorizedTTL is the duration to cache 'authorized' responses from the webhook authorizer.
	// +optional
	CacheAuthorizedTTL Duration `json:"cacheAuthorizedTTL,omitempty"`
	// cacheUnauthorizedTTL is the duration to cache 'unauthorized' responses from the webhook authorizer.
	// +optional
	CacheUnauthorizedTTL Duration `json:"cacheUnauthorizedTTL,omitempty"`
}

type KubeletX509Authentication added in v0.20200716.1 

type KubeletX509Authentication struct {
	// clientCAFile is the path to a PEM-encoded certificate bundle. If set, any request presenting a client certificate
	// signed by one of the authorities in the bundle is authenticated with a username corresponding to the CommonName,
	// and groups corresponding to the Organization in the client certificate.
	// +optional
	ClientCAFile string `json:"clientCAFile,omitempty"`
}

type NodeBootstrappingConfiguration added in v0.20200716.2 

type NodeBootstrappingConfiguration struct {
	ContainerService              *datamodel.ContainerService
	CloudSpecConfig               *datamodel.AzureEnvironmentSpecConfig
	K8sComponents                 *K8sComponents
	AgentPoolProfile              *datamodel.AgentPoolProfile
	TenantID                      string
	SubscriptionID                string
	ResourceGroupName             string
	UserAssignedIdentityClientID  string
	ConfigGPUDriverIfNeeded       bool
	EnableGPUDevicePluginIfNeeded bool
	EnableDynamicKubelet          bool
	EnableNvidia                  bool
}

NodeBootstrappingConfiguration represents configurations for node bootstrapping

type TemplateGenerator 

type TemplateGenerator struct{}

TemplateGenerator represents the object that performs the template generation.

func InitializeTemplateGenerator 

func InitializeTemplateGenerator() *TemplateGenerator

InitializeTemplateGenerator creates a new template generator object

func (*TemplateGenerator) GetNodeBootstrappingCmd 

func (t *TemplateGenerator) GetNodeBootstrappingCmd(config *NodeBootstrappingConfiguration) string

GetNodeBootstrappingCmd get node bootstrapping cmd

func (*TemplateGenerator) GetNodeBootstrappingPayload 

func (t *TemplateGenerator) GetNodeBootstrappingPayload(config *NodeBootstrappingConfiguration) string

GetNodeBootstrappingPayload get node bootstrapping data

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.