znet

package
v1.0.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 1, 2024 License: GPL-3.0 Imports: 29 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// The number of stack frames to start tracing from
	// (开始追踪堆栈信息的层数)
	StackBegin = 3
	// The number of stack frames to trace until the end
	// (追踪到最后的层数)
	StackEnd = 5
)
View Source 
const (
	PRE_HANDLE  ziface.HandleStep = iota // PreHandle for pre-processing
	HANDLE                               // Handle for processing
	POST_HANDLE                          // PostHandle for post-processing

	HANDLE_OVER
)
View Source 
const (
	// If the Worker goroutine pool is not started, a virtual WorkerID is assigned to the MsgHandler, which is 0, for metric counting
	// After starting the Worker goroutine pool, the ID of each worker is 0,1,2,3...
	// (如果不启动Worker协程池，则会给MsgHandler分配一个虚拟的WorkerID，这个workerID为0, 便于指标统计
	// 启动了Worker协程池后，每个worker的ID为0,1,2,3...)
	WorkerIDWithoutWorkerPool int = 0
)

Variables

View Source 
var AcceptDelay *acceptDelay

Functions

func HeatBeatDefaultHandle 

func HeatBeatDefaultHandle(req ziface.IRequest)

func NewClient 

func NewClient(ip string, port int, opts ...ClientOption) ziface.IClient

func NewDefaultRouterSlicesServer 

func NewDefaultRouterSlicesServer(opts ...Option) ziface.IServer

NewDefaultRouterSlicesServer creates a server handle with a default RouterRecovery processor. (创建一个默认自带一个Recover处理器的服务器句柄)

func NewFuncRequest 

func NewFuncRequest(conn ziface.IConnection, callFunc func()) ziface.IRequest

func NewHeartbeatChecker 

func NewHeartbeatChecker(interval time.Duration) ziface.IHeartbeatChecker

func NewRequest 

func NewRequest(conn ziface.IConnection, msg ziface.IMessage) ziface.IRequest

func NewServer 

func NewServer(opts ...Option) ziface.IServer

NewServer creates a server handle (创建一个服务器句柄)

func NewTLSClient 

func NewTLSClient(ip string, port int, opts ...ClientOption) ziface.IClient

func NewUserConfDefaultRouterSlicesServer 

func NewUserConfDefaultRouterSlicesServer(config *zconf.Config, opts ...Option) ziface.IServer

NewUserConfDefaultRouterSlicesServer creates a server handle with user-configured options and a default Recover handler. If the user does not wish to use the Use method, they should use NewUserConfServer instead. (创建一个用户配置的自带一个Recover处理器的服务器句柄，如果用户不希望Use这个方法，那么应该使用NewUserConfServer)

func NewUserConfServer 

func NewUserConfServer(config *zconf.Config, opts ...Option) ziface.IServer

NewUserConfServer creates a server handle using user-defined configuration (创建一个服务器句柄)

func NewWsClient 

func NewWsClient(ip string, port int, opts ...ClientOption) ziface.IClient

func RouterRecovery 

func RouterRecovery(request ziface.IRequest)

RouterRecovery If you use the server obtained from initializing with NewDefaultRouterSlicesServer method, this function will be included. It is used to catch any panics that occur during request handling and attempt to record the context information. (如果使用NewDefaultRouterSlicesServer方法初始化的获得的server将自带这个函数 作用是接收业务执行上产生的panic并且尝试记录现场信息)

func RouterTime 

func RouterTime(request ziface.IRequest)

RouterTime Simply accumulates the time taken by all the routing groups, but not enabled (简单累计所有路由组的耗时，不启用)

Types

type BaseRouter 

type BaseRouter struct{}

BaseRouter is used as the base class when implementing a router. Depending on the needs, the methods of this base class can be overridden. (实现router时，先嵌入这个基类，然后根据需要对这个基类的方法进行重写)

func (*BaseRouter) Handle 

func (br *BaseRouter) Handle(req ziface.IRequest)

Handle -

func (*BaseRouter) PostHandle 

func (br *BaseRouter) PostHandle(req ziface.IRequest)

PostHandle -

func (*BaseRouter) PreHandle 

func (br *BaseRouter) PreHandle(req ziface.IRequest)

PreHandle -

type Client 

type Client struct {
	// Client Name 客户端的名称
	Name string
	// IP of the target server to connect 目标链接服务器的IP
	Ip string
	// Port of the target server to connect 目标链接服务器的端口
	Port int

	// Error channel
	ErrChan chan error
	// contains filtered or unexported fields
}

func (*Client) AddInterceptor 

func (c *Client) AddInterceptor(interceptor ziface.IInterceptor)

func (*Client) AddRouter 

func (c *Client) AddRouter(msgID uint32, router ziface.IRouter)

func (*Client) Conn 

func (c *Client) Conn() ziface.IConnection

func (*Client) GetErrChan 

func (c *Client) GetErrChan() chan error

func (*Client) GetLengthField 

func (c *Client) GetLengthField() *ziface.LengthField

func (*Client) GetMsgHandler 

func (c *Client) GetMsgHandler() ziface.IMsgHandle

func (*Client) GetName 

func (c *Client) GetName() string

func (*Client) GetOnConnStart 

func (c *Client) GetOnConnStart() func(ziface.IConnection)

func (*Client) GetOnConnStop 

func (c *Client) GetOnConnStop() func(ziface.IConnection)

func (*Client) GetPacket 

func (c *Client) GetPacket() ziface.IDataPack

func (*Client) Restart 

func (c *Client) Restart()

Start starts the client, sends requests and establishes a connection. (重新启动客户端，发送请求且建立连接)

func (*Client) SetDecoder 

func (c *Client) SetDecoder(decoder ziface.IDecoder)

func (*Client) SetName 

func (c *Client) SetName(name string)

func (*Client) SetOnConnStart 

func (c *Client) SetOnConnStart(hookFunc func(ziface.IConnection))

func (*Client) SetOnConnStop 

func (c *Client) SetOnConnStop(hookFunc func(ziface.IConnection))

func (*Client) SetPacket 

func (c *Client) SetPacket(packet ziface.IDataPack)

func (*Client) Start 

func (c *Client) Start()

Start starts the client, sends requests and establishes a connection. (启动客户端，发送请求且建立链接)

func (*Client) StartHeartBeat 

func (c *Client) StartHeartBeat(interval time.Duration)

StartHeartBeat starts heartbeat detection with a fixed time interval. interval: the time interval between each heartbeat message. (启动心跳检测, interval: 每次发送心跳的时间间隔)

func (*Client) StartHeartBeatWithOption 

func (c *Client) StartHeartBeatWithOption(interval time.Duration, option *ziface.HeartBeatOption)

StartHeartBeatWithOption starts heartbeat detection with a custom callback function. interval: the time interval between each heartbeat message. option: a HeartBeatOption struct that contains the custom callback function and message 启动心跳检测(自定义回调)

func (*Client) Stop 

func (c *Client) Stop()

type ClientOption 

type ClientOption func(c ziface.IClient)

Options for Client

func WithNameClient 

func WithNameClient(name string) ClientOption

Set client name

func WithPacketClient 

func WithPacketClient(pack ziface.IDataPack) ClientOption

Implement custom data packet format by implementing the Packet interface for client, otherwise use the default data packet format

type ConnManager 

type ConnManager struct {
	// contains filtered or unexported fields
}

func (*ConnManager) Add 

func (connMgr *ConnManager) Add(conn ziface.IConnection)

func (*ConnManager) ClearConn 

func (connMgr *ConnManager) ClearConn()

func (*ConnManager) Get 

func (connMgr *ConnManager) Get(connID uint64) (ziface.IConnection, error)

func (*ConnManager) Get2 

func (connMgr *ConnManager) Get2(strConnId string) (ziface.IConnection, error)

Get2 It is recommended to use this method to obtain connection instances

func (*ConnManager) GetAllConnID 

func (connMgr *ConnManager) GetAllConnID() []uint64

func (*ConnManager) GetAllConnIdStr 

func (connMgr *ConnManager) GetAllConnIdStr() []string

func (*ConnManager) Len 

func (connMgr *ConnManager) Len() int

func (*ConnManager) Range 

func (connMgr *ConnManager) Range(cb func(uint64, ziface.IConnection, interface{}) error, args interface{}) (err error)

func (*ConnManager) Range2 

func (connMgr *ConnManager) Range2(cb func(string, ziface.IConnection, interface{}) error, args interface{}) (err error)

Range2 It is recommended to use this method to 'Range'

func (*ConnManager) Remove 

func (connMgr *ConnManager) Remove(conn ziface.IConnection)

type Connection 

type Connection struct {
	// contains filtered or unexported fields
}

Connection TCP connection module Used to handle the read and write business of TCP connections, one Connection corresponds to one connection (用于处理Tcp连接的读写业务 一个连接对应一个Connection)

func (*Connection) Context 

func (c *Connection) Context() context.Context

func (*Connection) GetConnID 

func (c *Connection) GetConnID() uint64

func (*Connection) GetConnIdStr 

func (c *Connection) GetConnIdStr() string

func (*Connection) GetConnection 

func (c *Connection) GetConnection() net.Conn

func (*Connection) GetMsgHandler 

func (c *Connection) GetMsgHandler() ziface.IMsgHandle

func (*Connection) GetName 

func (c *Connection) GetName() string

func (*Connection) GetProperty 

func (c *Connection) GetProperty(key string) (interface{}, error)

func (*Connection) GetTCPConnection deprecated 

func (c *Connection) GetTCPConnection() net.Conn

Deprecated: use GetConnection instead

func (*Connection) GetWorkerID 

func (c *Connection) GetWorkerID() uint32

func (*Connection) GetWsConn 

func (c *Connection) GetWsConn() *websocket.Conn

func (*Connection) IsAlive 

func (c *Connection) IsAlive() bool

func (*Connection) LocalAddr 

func (c *Connection) LocalAddr() net.Addr

func (*Connection) LocalAddrString 

func (c *Connection) LocalAddrString() string

func (*Connection) RemoteAddr 

func (c *Connection) RemoteAddr() net.Addr

func (*Connection) RemoteAddrString 

func (c *Connection) RemoteAddrString() string

func (*Connection) RemoveProperty 

func (c *Connection) RemoveProperty(key string)

func (*Connection) Send 

func (c *Connection) Send(data []byte) error

func (*Connection) SendBuffMsg 

func (c *Connection) SendBuffMsg(msgID uint32, data []byte) error

func (*Connection) SendMsg 

func (c *Connection) SendMsg(msgID uint32, data []byte) error

SendMsg directly sends Message data to the remote TCP client. (直接将Message数据发送数据给远程的TCP客户端)

func (*Connection) SendToQueue 

func (c *Connection) SendToQueue(data []byte) error

func (*Connection) SetHeartBeat 

func (c *Connection) SetHeartBeat(checker ziface.IHeartbeatChecker)

func (*Connection) SetProperty 

func (c *Connection) SetProperty(key string, value interface{})

func (*Connection) Start 

func (c *Connection) Start()

Start starts the connection and makes the current connection work. (启动连接，让当前连接开始工作)

func (*Connection) StartReader 

func (c *Connection) StartReader()

StartReader is a goroutine that reads data from the client (读消息Goroutine，用于从客户端中读取数据)

func (*Connection) StartWriter 

func (c *Connection) StartWriter()

StartWriter is the goroutine that writes messages to the client (写消息Goroutine， 用户将数据发送给客户端)

func (*Connection) Stop 

func (c *Connection) Stop()

Stop stops the connection and ends the current connection state. (停止连接，结束当前连接状态)

type GroupRouter 

type GroupRouter struct {
	Handlers []ziface.RouterHandler
	// contains filtered or unexported fields
}

func NewGroup 

func NewGroup(start, end uint32, router *RouterSlices, Handlers ...ziface.RouterHandler) *GroupRouter

func (*GroupRouter) AddHandler 

func (g *GroupRouter) AddHandler(MsgId uint32, Handlers ...ziface.RouterHandler)

func (*GroupRouter) Use 

func (g *GroupRouter) Use(Handlers ...ziface.RouterHandler)

type HeartbeatChecker 

type HeartbeatChecker struct {
	// contains filtered or unexported fields
}

func (*HeartbeatChecker) BindConn 

func (h *HeartbeatChecker) BindConn(conn ziface.IConnection)

func (*HeartbeatChecker) BindRouter 

func (h *HeartbeatChecker) BindRouter(msgID uint32, router ziface.IRouter)

func (*HeartbeatChecker) BindRouterSlices 

func (h *HeartbeatChecker) BindRouterSlices(msgID uint32, handlers ...ziface.RouterHandler)

func (*HeartbeatChecker) Clone 

func (h *HeartbeatChecker) Clone() ziface.IHeartbeatChecker

Clone clones to a specified connection (克隆到一个指定的链接上)

func (*HeartbeatChecker) MsgID 

func (h *HeartbeatChecker) MsgID() uint32

func (*HeartbeatChecker) Router 

func (h *HeartbeatChecker) Router() ziface.IRouter

func (*HeartbeatChecker) RouterSlices 

func (h *HeartbeatChecker) RouterSlices() []ziface.RouterHandler

func (*HeartbeatChecker) SendHeartBeatMsg 

func (h *HeartbeatChecker) SendHeartBeatMsg() error

func (*HeartbeatChecker) SetHeartbeatFunc 

func (h *HeartbeatChecker) SetHeartbeatFunc(beatFunc ziface.HeartBeatFunc)

func (*HeartbeatChecker) SetHeartbeatMsgFunc 

func (h *HeartbeatChecker) SetHeartbeatMsgFunc(f ziface.HeartBeatMsgFunc)

func (*HeartbeatChecker) SetOnRemoteNotAlive 

func (h *HeartbeatChecker) SetOnRemoteNotAlive(f ziface.OnRemoteNotAlive)

func (*HeartbeatChecker) Start 

func (h *HeartbeatChecker) Start()

func (*HeartbeatChecker) Stop 

func (h *HeartbeatChecker) Stop()

type HeatBeatDefaultRouter 

type HeatBeatDefaultRouter struct {
	BaseRouter
}

Default callback routing business for receiving remote heartbeat messages (收到remote心跳消息的默认回调路由业务)

func (*HeatBeatDefaultRouter) Handle 

func (r *HeatBeatDefaultRouter) Handle(req ziface.IRequest)

type KcpConnection 

type KcpConnection struct {
	// contains filtered or unexported fields
}

Connection KCP connection module Used to handle the read and write business of KCP connections, one Connection corresponds to one connection (用于处理KCP连接的读写业务 一个连接对应一个Connection)

func (*KcpConnection) Context 

func (c *KcpConnection) Context() context.Context

func (*KcpConnection) GetConnID 

func (c *KcpConnection) GetConnID() uint64

func (*KcpConnection) GetConnIdStr 

func (c *KcpConnection) GetConnIdStr() string

func (*KcpConnection) GetConnection 

func (c *KcpConnection) GetConnection() net.Conn

func (*KcpConnection) GetMsgHandler 

func (c *KcpConnection) GetMsgHandler() ziface.IMsgHandle

func (*KcpConnection) GetName 

func (c *KcpConnection) GetName() string

func (*KcpConnection) GetProperty 

func (c *KcpConnection) GetProperty(key string) (interface{}, error)

func (*KcpConnection) GetTCPConnection deprecated 

func (c *KcpConnection) GetTCPConnection() net.Conn

Deprecated: use GetConnection instead

func (*KcpConnection) GetWorkerID 

func (c *KcpConnection) GetWorkerID() uint32

func (*KcpConnection) GetWsConn 

func (c *KcpConnection) GetWsConn() *websocket.Conn

func (*KcpConnection) IsAlive 

func (c *KcpConnection) IsAlive() bool

func (*KcpConnection) LocalAddr 

func (c *KcpConnection) LocalAddr() net.Addr

func (*KcpConnection) LocalAddrString 

func (c *KcpConnection) LocalAddrString() string

func (*KcpConnection) RemoteAddr 

func (c *KcpConnection) RemoteAddr() net.Addr

func (*KcpConnection) RemoteAddrString 

func (c *KcpConnection) RemoteAddrString() string

func (*KcpConnection) RemoveProperty 

func (c *KcpConnection) RemoveProperty(key string)

func (*KcpConnection) Send 

func (c *KcpConnection) Send(data []byte) error

func (*KcpConnection) SendBuffMsg 

func (c *KcpConnection) SendBuffMsg(msgID uint32, data []byte) error

func (*KcpConnection) SendMsg 

func (c *KcpConnection) SendMsg(msgID uint32, data []byte) error

SendMsg directly sends Message data to the remote KCP client. (直接将Message数据发送数据给远程的KCP客户端)

func (*KcpConnection) SendToQueue 

func (c *KcpConnection) SendToQueue(data []byte) error

func (*KcpConnection) SetHeartBeat 

func (c *KcpConnection) SetHeartBeat(checker ziface.IHeartbeatChecker)

func (*KcpConnection) SetProperty 

func (c *KcpConnection) SetProperty(key string, value interface{})

func (*KcpConnection) Start 

func (c *KcpConnection) Start()

Start starts the connection and makes the current connection work. (启动连接，让当前连接开始工作)

func (*KcpConnection) StartReader 

func (c *KcpConnection) StartReader()

StartReader is a goroutine that reads data from the client (读消息Goroutine，用于从客户端中读取数据)

func (*KcpConnection) StartWriter 

func (c *KcpConnection) StartWriter()

StartWriter is the goroutine that writes messages to the client (写消息Goroutine， 用户将数据发送给客户端)

func (*KcpConnection) Stop 

func (c *KcpConnection) Stop()

Stop stops the connection and ends the current connection state. (停止连接，结束当前连接状态)

type MsgHandle 

type MsgHandle struct {
	// A map property that stores the processing methods for each MsgID
	// (存放每个MsgID 所对应的处理方法的map属性)
	Apis map[uint32]ziface.IRouter

	// The number of worker goroutines in the business work Worker pool
	// (业务工作Worker池的数量)
	WorkerPoolSize uint32

	// A message queue for workers to take tasks
	// (Worker负责取任务的消息队列)
	TaskQueue []chan ziface.IRequest

	RouterSlices *RouterSlices
	// contains filtered or unexported fields
}

MsgHandle is the module for handling message processing callbacks (对消息的处理回调模块)

func (*MsgHandle) AddInterceptor 

func (mh *MsgHandle) AddInterceptor(interceptor ziface.IInterceptor)

func (*MsgHandle) AddRouter 

func (mh *MsgHandle) AddRouter(msgID uint32, router ziface.IRouter)

AddRouter adds specific processing logic for messages (为消息添加具体的处理逻辑)

func (*MsgHandle) AddRouterSlices 

func (mh *MsgHandle) AddRouterSlices(msgId uint32, handler ...ziface.RouterHandler) ziface.IRouterSlices

AddRouterSlices adds router handlers using slices (切片路由添加)

func (*MsgHandle) Execute 

func (mh *MsgHandle) Execute(request ziface.IRequest)

func (*MsgHandle) Group 

func (mh *MsgHandle) Group(start, end uint32, Handlers ...ziface.RouterHandler) ziface.IGroupRouterSlices

Group routes into a group (路由分组)

func (*MsgHandle) Intercept 

func (mh *MsgHandle) Intercept(chain ziface.IChain) ziface.IcResp

Data processing interceptor that is necessary by default in Zinx (Zinx默认必经的数据处理拦截器)

func (*MsgHandle) SendMsgToTaskQueue 

func (mh *MsgHandle) SendMsgToTaskQueue(request ziface.IRequest)

SendMsgToTaskQueue sends the message to the TaskQueue for processing by the worker (将消息交给TaskQueue,由worker进行处理)

func (*MsgHandle) StartOneWorker 

func (mh *MsgHandle) StartOneWorker(workerID int, taskQueue chan ziface.IRequest)

StartOneWorker starts a worker workflow (启动一个Worker工作流程)

func (*MsgHandle) StartWorkerPool 

func (mh *MsgHandle) StartWorkerPool()

StartWorkerPool starts the worker pool

func (*MsgHandle) Use 

func (mh *MsgHandle) Use(Handlers ...ziface.RouterHandler) ziface.IRouterSlices

type Option 

type Option func(s *Server)

Options for Server (Server的服务Option)

func WithPacket 

func WithPacket(pack ziface.IDataPack) Option

Implement custom data packet format by implementing the Packet interface, otherwise use the default data packet format (只要实现Packet 接口可自由实现数据包解析格式，如果没有则使用默认解析格式)

type Request 

type Request struct {
	ziface.BaseRequest
	// contains filtered or unexported fields
}

Request 请求

func (*Request) Abort 

func (r *Request) Abort()

func (*Request) BindRouter 

func (r *Request) BindRouter(router ziface.IRouter)

func (*Request) BindRouterSlices 

func (r *Request) BindRouterSlices(handlers []ziface.RouterHandler)

New version

func (*Request) Call 

func (r *Request) Call()

func (*Request) GetConnection 

func (r *Request) GetConnection() ziface.IConnection

func (*Request) GetData 

func (r *Request) GetData() []byte

func (*Request) GetMessage 

func (r *Request) GetMessage() ziface.IMessage

func (*Request) GetMsgID 

func (r *Request) GetMsgID() uint32

func (*Request) GetResponse 

func (r *Request) GetResponse() ziface.IcResp

func (*Request) Goto 

func (r *Request) Goto(step ziface.HandleStep)

func (*Request) RouterSlicesNext 

func (r *Request) RouterSlicesNext()

func (*Request) SetResponse 

func (r *Request) SetResponse(response ziface.IcResp)

type RequestFunc 

type RequestFunc struct {
	ziface.BaseRequest
	// contains filtered or unexported fields
}

func (*RequestFunc) CallFunc 

func (rf *RequestFunc) CallFunc()

func (*RequestFunc) GetConnection 

func (rf *RequestFunc) GetConnection() ziface.IConnection

type RouterSlices 

type RouterSlices struct {
	Apis     map[uint32][]ziface.RouterHandler
	Handlers []ziface.RouterHandler
	sync.RWMutex
}

func NewRouterSlices 

func NewRouterSlices() *RouterSlices

func (*RouterSlices) AddHandler 

func (r *RouterSlices) AddHandler(msgId uint32, Handlers ...ziface.RouterHandler)

func (*RouterSlices) GetHandlers 

func (r *RouterSlices) GetHandlers(MsgId uint32) ([]ziface.RouterHandler, bool)

func (*RouterSlices) Group 

func (r *RouterSlices) Group(start, end uint32, Handlers ...ziface.RouterHandler) ziface.IGroupRouterSlices

func (*RouterSlices) Use 

func (r *RouterSlices) Use(handles ...ziface.RouterHandler)

type Server 

type Server struct {
	// Name of the server (服务器的名称)
	Name string
	//tcp4 or other
	IPVersion string
	// IP version (e.g. "tcp4") - 服务绑定的IP地址
	IP string
	// IP address the server is bound to (服务绑定的端口)
	Port int
	// 服务绑定的websocket 端口 (Websocket port the server is bound to)
	WsPort int
	// 服务绑定的kcp 端口 (kcp port the server is bound to)
	KcpPort int

	// 服务绑定的udp 端口 (udp port the server is bound to)
	UdpPort int

	// Routing mode (路由模式)
	RouterSlicesMode bool

	// Current server's connection manager (当前Server的链接管理器)
	ConnMgr ziface.IConnManager
	// contains filtered or unexported fields
}

Server interface implementation, defines a Server service class (接口实现，定义一个Server服务类)

func (*Server) AddInterceptor 

func (s *Server) AddInterceptor(interceptor ziface.IInterceptor)

func (*Server) AddRouter 

func (s *Server) AddRouter(msgID uint32, router ziface.IRouter)

func (*Server) AddRouterSlices 

func (s *Server) AddRouterSlices(msgID uint32, router ...ziface.RouterHandler) ziface.IRouterSlices

func (*Server) GetConnMgr 

func (s *Server) GetConnMgr() ziface.IConnManager

func (*Server) GetHeartBeat 

func (s *Server) GetHeartBeat() ziface.IHeartbeatChecker

func (*Server) GetLengthField 

func (s *Server) GetLengthField() *ziface.LengthField

func (*Server) GetMsgHandler 

func (s *Server) GetMsgHandler() ziface.IMsgHandle

func (*Server) GetOnConnStart 

func (s *Server) GetOnConnStart() func(ziface.IConnection)

func (*Server) GetOnConnStop 

func (s *Server) GetOnConnStop() func(ziface.IConnection)

func (*Server) GetPacket 

func (s *Server) GetPacket() ziface.IDataPack

func (*Server) Group 

func (s *Server) Group(start, end uint32, Handlers ...ziface.RouterHandler) ziface.IGroupRouterSlices

func (*Server) ListenKcpConn 

func (s *Server) ListenKcpConn()

func (*Server) ListenTcpConn 

func (s *Server) ListenTcpConn()

func (*Server) ListenUDPConn 

func (s *Server) ListenUDPConn()

func (*Server) ListenWebsocketConn 

func (s *Server) ListenWebsocketConn()

func (*Server) Serve 

func (s *Server) Serve()

Serve runs the server (运行服务)

func (*Server) ServerName 

func (s *Server) ServerName() string

func (*Server) SetDecoder 

func (s *Server) SetDecoder(decoder ziface.IDecoder)

func (*Server) SetOnConnStart 

func (s *Server) SetOnConnStart(hookFunc func(ziface.IConnection))

func (*Server) SetOnConnStop 

func (s *Server) SetOnConnStop(hookFunc func(ziface.IConnection))

func (*Server) SetPacket 

func (s *Server) SetPacket(packet ziface.IDataPack)

func (*Server) SetWebsocketAuth 

func (s *Server) SetWebsocketAuth(f func(r *http.Request) error)

func (*Server) Start 

func (s *Server) Start()

Start the network service (开启网络服务)

func (*Server) StartConn 

func (s *Server) StartConn(conn ziface.IConnection)

func (*Server) StartHeartBeat 

func (s *Server) StartHeartBeat(interval time.Duration)

StartHeartBeat starts the heartbeat check. interval is the time interval between each heartbeat. (启动心跳检测 interval 每次发送心跳的时间间隔)

func (*Server) StartHeartBeatWithOption 

func (s *Server) StartHeartBeatWithOption(interval time.Duration, option *ziface.HeartBeatOption)

StartHeartBeatWithOption starts the heartbeat detection with the given configuration. interval is the time interval for sending heartbeat messages. option is the configuration for heartbeat detection. 启动心跳检测 (option 心跳检测的配置)

func (*Server) Stop 

func (s *Server) Stop()

Stop stops the server (停止服务)

func (*Server) Use 

func (s *Server) Use(Handlers ...ziface.RouterHandler) ziface.IRouterSlices

type WsConnection 

type WsConnection struct {
	// contains filtered or unexported fields
}

WsConnection is a module for handling the read and write operations of a WebSocket connection. (Websocket连接模块, 用于处理 Websocket 连接的读写业务 一个连接对应一个Connection)

func (*WsConnection) Context 

func (c *WsConnection) Context() context.Context

Context returns the context for the connection, which can be used by user-defined goroutines to get the connection exit status. (返回ctx，用于用户自定义的go程获取连接退出状态)

func (*WsConnection) GetConnID 

func (c *WsConnection) GetConnID() uint64

func (*WsConnection) GetConnIdStr 

func (c *WsConnection) GetConnIdStr() string

func (*WsConnection) GetConnection 

func (c *WsConnection) GetConnection() net.Conn

func (*WsConnection) GetMsgHandler 

func (c *WsConnection) GetMsgHandler() ziface.IMsgHandle

func (*WsConnection) GetName 

func (c *WsConnection) GetName() string

func (*WsConnection) GetProperty 

func (c *WsConnection) GetProperty(key string) (interface{}, error)

func (*WsConnection) GetTCPConnection deprecated 

func (c *WsConnection) GetTCPConnection() net.Conn

Deprecated: use GetConnection instead

func (*WsConnection) GetWorkerID 

func (c *WsConnection) GetWorkerID() uint32

func (*WsConnection) GetWsConn 

func (c *WsConnection) GetWsConn() *websocket.Conn

func (*WsConnection) IsAlive 

func (c *WsConnection) IsAlive() bool

func (*WsConnection) LocalAddr 

func (c *WsConnection) LocalAddr() net.Addr

func (*WsConnection) LocalAddrString 

func (c *WsConnection) LocalAddrString() string

func (*WsConnection) RemoteAddr 

func (c *WsConnection) RemoteAddr() net.Addr

func (*WsConnection) RemoteAddrString 

func (c *WsConnection) RemoteAddrString() string

func (*WsConnection) RemoveProperty 

func (c *WsConnection) RemoveProperty(key string)

func (*WsConnection) Send 

func (c *WsConnection) Send(data []byte) error

func (*WsConnection) SendBuffMsg 

func (c *WsConnection) SendBuffMsg(msgID uint32, data []byte) error

SendBuffMsg sends BuffMsg

func (*WsConnection) SendMsg 

func (c *WsConnection) SendMsg(msgID uint32, data []byte) error

SendMsg directly sends the Message data to the remote TCP client. (直接将Message数据发送数据给远程的TCP客户端)性能低

func (*WsConnection) SendToQueue 

func (c *WsConnection) SendToQueue(data []byte) error

func (*WsConnection) SetHeartBeat 

func (c *WsConnection) SetHeartBeat(checker ziface.IHeartbeatChecker)

func (*WsConnection) SetProperty 

func (c *WsConnection) SetProperty(key string, value interface{})

func (*WsConnection) Start 

func (c *WsConnection) Start()

Start starts the connection and makes it work. (Start 启动连接，让当前连接开始工作)

func (*WsConnection) StartReader 

func (c *WsConnection) StartReader()

StartReader is a Goroutine that reads messages from the client. (StartReader 读消息Goroutine，用于从客户端中读取数据)

func (*WsConnection) StartWriter 

func (c *WsConnection) StartWriter()

StartWriter is a Goroutine that sends messages to the client (StartWriter 写消息Goroutine， 用户将数据发送给客户端)

func (*WsConnection) Stop 

func (c *WsConnection) Stop()

Stop stops the connection and ends its current state. (停止连接，结束当前连接状态)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.