rancher-rke

README

rke

Rancher Kubernetes Engine, an extremely simple, lightning fast Kubernetes installer that works everywhere.

Download

Please check the releases page.

Requirements

• Docker versions 1.11.2 up to 1.13.1 and 17.03.x are validated for Kubernetes versions 1.8, 1.9 and 1.10
• OpenSSH 7.0+ must be installed on each node for stream local forwarding to work.
• The SSH user used for node access must be a member of the docker group:

usermod -aG docker <user_name>

• Ports 6443, 2379, and 2380 should be opened between cluster nodes.
• Swap disabled on worker nodes.

Getting Started

Starting out with RKE? Check out this blog post or the Quick Start Guide

Using RKE

Standing up a Kubernetes is as simple as creating a cluster.yml configuration file and running the command:

./rke up --config cluster.yml

Full cluster.yml example

You can view full sample of cluster.yml here.

Minimal cluster.yml example

# default k8s version: v1.8.10-rancher1-1
# default network plugin: canal
nodes:
  - address: 1.2.3.4
    user: ubuntu
    role: [controlplane,worker,etcd]

Kubernetes Version

The current default kubernetes version used by RKE is v1.10.1-rancher1.

There are two ways to select a kubernetes version:

• Using the kubernetes image defined in System Images
• Using the configuration option kubernetes_version

In case both are defined, the system images configuration will take precedence over kubernetes_version. Since the kubernetes_version options was added mainly to be used by Rancher v2.0, it has a limited number of supported tags that can be found here.

If a version is defined in kubernetes_version and is not found in this map, the default is used.

Network Plugins

RKE supports the following network plugins that are deployed as addons:

• Flannel
• Calico
• Canal
• Weave

To use specific network plugin configure cluster.yml to include:

network:
  plugin: flannel

Network Options

There are extra options that can be specified for each network plugin:

Flannel

• flannel_image: Flannel daemon Docker image
• flannel_cni_image: Flannel CNI binary installer Docker image
• flannel_iface: Interface to use for inter-host communication

Calico

• calico_node_image: Calico Daemon Docker image
• calico_cni_image: Calico CNI binary installer Docker image
• calico_controllers_image: Calico Controller Docker image
• calicoctl_image: Calicoctl tool Docker image
• calico_cloud_provider: Cloud provider where Calico will operate, currently supported values are: aws, gce

Canal

• canal_node_image: Canal Node Docker image
• canal_cni_image: Canal CNI binary installer Docker image
• canal_flannel_image: Canal Flannel Docker image

Weave

• weave_node_image: Weave Node Docker image
• weave_cni_image: Weave CNI binary installer Docker image

RKE System Images

Prior to version 0.1.6, RKE used the following list of images for deployment and cluster configuration:

system_images:
  etcd: rancher/etcd:v3.0.17
  kubernetes: rancher/k8s:v1.8.9-rancher1-1
  alpine: alpine:latest
  nginx_proxy: rancher/rke-nginx-proxy:v0.1.1
  cert_downloader: rancher/rke-cert-deployer:v0.1.1
  kubernetes_services_sidecar: rancher/rke-service-sidekick:v0.1.0
  kubedns: rancher/k8s-dns-kube-dns-amd64:1.14.5
  dnsmasq: rancher/k8s-dns-dnsmasq-nanny-amd64:1.14.5
  kubedns_sidecar: rancher/k8s-dns-sidecar-amd64:1.14.5
  kubedns_autoscaler: rancher/cluster-proportional-autoscaler-amd64:1.0.0
  flannel: rancher/coreos-flannel:v0.9.1
  flannel_cni: rancher/coreos-flannel-cni:v0.2.0

As of version 0.1.6, we consolidated several of those images into a single image to simplify and speed the deployment process.

The following images are no longer required, and can be replaced by rancher/rke-tools:v0.1.4:

• alpine:latest
• rancher/rke-nginx-proxy:v0.1.1
• rancher/rke-cert-deployer:v0.1.1
• rancher/rke-service-sidekick:v0.1.0

Addons

RKE supports pluggable addons. Addons are used to deploy several cluster components including:

• Network plugin
• KubeDNS
• Ingress controller

In addition, a user can specify the addon yaml in the cluster.yml file, and when running

rke up --config cluster.yml

RKE will deploy the addons yaml after the cluster starts, RKE first uploads this yaml file as a configmap in kubernetes cluster and then run a kubernetes job that mounts this config map and deploy the addons.

Note that RKE doesn't support yet removal or update of the addons, so once they are deployed the first time you can't change them using rke

To start using addons use addons: option in the cluster.yml file for example:

addons: |-
    ---
    apiVersion: v1
    kind: Pod
    metadata:
      name: my-nginx
      namespace: default
    spec:
      containers:
      - name: my-nginx
        image: nginx
        ports:
        - containerPort: 80

Note that we are using |- because the addons option is a multi line string option, where you can specify multiple yaml files and separate them with ---

For addons_include: you may pass either http/https urls or file paths, for example:

addons_include:
    - https://raw.githubusercontent.com/rook/rook/master/cluster/examples/kubernetes/rook-operator.yaml
    - https://raw.githubusercontent.com/rook/rook/master/cluster/examples/kubernetes/rook-cluster.yaml
    - /opt/manifests/example.yaml
    - ./nginx.yaml

Addon deployment jobs

RKE uses kubernetes Jobs to deploy addons. In some cases, addons deployment takes longer than expected. Starting with version 0.1.7-rc1, RKE provides an option to controle the job check timeout in seconds:

addon_job_timeout: 30

Critical and noncritical addons

As of version 0.1.7-rc1, addons are split into two categories: critical and noncritical.

Critical addons will cause RKE to error out if they fail to deploy for any reason. While noncritical addons will just log a warning and continue with the deployment. Currently only the network plugin is considered critical.

High Availability

RKE is HA ready, you can specify more than one controlplane host in the cluster.yml file, and rke will deploy master components on all of them, the kubelets are configured to connect to 127.0.0.1:6443 by default which is the address of nginx-proxy service that proxy requests to all master nodes.

to start an HA cluster, just specify more than one host with role controlplane, and start the cluster normally.

Adding/Removing Nodes

RKE supports adding/removing nodes for worker and controlplane hosts, in order to add additional nodes you will only need to update the cluster.yml file with additional nodes and run rke up with the same file.

To remove nodes just remove them from the hosts list in the cluster configuration file cluster.yml, and re run rke up command.

Cluster Remove

RKE supports rke remove command, the command does the following:

• Connect to each host and remove the kubernetes services deployed on it.
• Clean each host from the directories left by the services:
  • /etc/kubernetes/ssl
  • /var/lib/etcd
  • /etc/cni
  • /opt/cni
  • /var/run/calico

Note that this command is irreversible and will destroy the kubernetes cluster entirely.

Cluster Upgrade

RKE supports kubernetes cluster upgrade through changing the image version of services, in order to do that change the image option for each services, for example:

image: rancher/hyperkube:v1.9.7

TO

image: rancher/hyperkube:v1.10.1

And then run:

rke up --config cluster.yml

RKE will first look for the local kube_config_cluster.yml and then tries to upgrade each service to the latest image.

Note that rollback isn't supported in RKE and may lead to unxpected results

Service Upgrade

Service can also be upgraded by changing any of the services arguments or extra args and run rke up again with the updated configuration file.

Please note that changing the following arguments: service_cluster_ip_range or cluster_cidr will result in a broken cluster, because currently the network pods will not be automatically upgraded.

RKE Config

RKE supports command rke config which generates a cluster config template for the user, to start using this command just write:

rke config --name mycluster.yml

RKE will ask some questions around the cluster file like number of the hosts, ips, ssh users, etc, --empty option will generate an empty cluster.yml file, also if you just want to print on the screen and not save it in a file you can use --print.

Ingress Controller

RKE will deploy Nginx controller by default, user can disable this by specifying none to ingress provider option in the cluster configuration, user also can specify list of options for nginx config map listed in this doc, and command line extra_args listed in this doc, for example:

ingress:
  provider: nginx
  options:
    map-hash-bucket-size: "128"
    ssl-protocols: SSLv2
  extra_args:
    enable-ssl-passthrough: ""

By default, RKE will deploy ingress controller on all schedulable nodes (controlplane and workers), to specify only certain nodes for ingress controller to be deployed, user has to specify node_selector for the ingress and the right label on the node, for example:

nodes:
  - address: 1.1.1.1
    role: [controlplane,worker,etcd]
    user: root
    labels:
      app: ingress

ingress:
  provider: nginx
  node_selector:
    app: ingress

RKE will deploy Nginx Ingress controller as a DaemonSet with hostnetwork: true, so ports 80, and 443 will be opened on each node where the controller is deployed.

Extra Args and Binds

RKE supports additional service arguments.

services:
  # ...
  kube-controller:
    extra_args:
      cluster-name: "mycluster"

This will add/append --cluster-name=mycluster to the container list of arguments.

As of v0.1.3-rc2 using extra_args will add new arguments and override existing defaults. For example, if you need to modify the default admission controllers list, you need to change the default list and add apply it using extra_args.

RKE also supports additional volume binds:

services:
  # ...
  kubelet:
    extra_binds:
      - "/host/dev:/dev"
      - "/usr/libexec/kubernetes/kubelet-plugins:/usr/libexec/kubernetes/kubelet-plugins:z"

Authentication

RKE Supports x509 authentication strategy. You can additionally define a list of SANs (Subject Alternative Names) to add to the Kubernetes API Server PKI certificates. This allows you to connect to your Kubernetes cluster API Server through a load balancer, for example, rather than a single node.

authentication:
  strategy: x509
  sans:
  - "10.18.160.10"
  - "my-loadbalancer-1234567890.us-west-2.elb.amazonaws.com"

External etcd

RKE supports using external etcd instead of deploying etcd servers, to enable external etcd the following parameters should be populated:

services:
  etcd:
    path: /etcdcluster
    external_urls:
      - https://etcd-example.com:2379
    ca_cert: |-
      -----BEGIN CERTIFICATE-----
      xxxxxxxxxx
      -----END CERTIFICATE-----
    cert: |-
      -----BEGIN CERTIFICATE-----
      xxxxxxxxxx
      -----END CERTIFICATE-----
    key: |-
      -----BEGIN PRIVATE KEY-----
      xxxxxxxxxx
      -----END PRIVATE KEY-----

Note that RKE only supports connecting to TLS enabled etcd setup, user can enable multiple endpoints in the external_urls field. RKE will not accept having external urls and nodes with etcd role at the same time, user should only specify either etcd role for servers or external etcd but not both.

Cloud Providers

Starting from v0.1.3 rke supports cloud providers.

AWS Cloud Provider

To enable AWS cloud provider, you can set the following in the cluster configuration file:

cloud_provider:
  name: aws

AWS cloud provider has to be enabled on ec2 instances with the right IAM role.

Azure Cloud provider

Azure cloud provider can be enabled by passing azure as the cloud provider name and set of options to the configuration file:

cloud_provider:
  name: azure
  cloud_config:
    aadClientId: xxxxxxxxxxxx
    aadClientSecret: xxxxxxxxxxx
    location: westus
    resourceGroup: rke-rg
    subnetName: rke-subnet
    subscriptionId: xxxxxxxxxxx
    vnetName: rke-vnet
    tenantId: xxxxxxxxxx
    securityGroupName: rke-nsg

You also have to make sure that the Azure node name must match the kubernetes node name, you can do that by changing the value of hostname_override in the config file:

nodes:
  - address: x.x.x.x
    hostname_override: azure-rke1
    user: ubuntu
    role:
    - controlplane
    - etcd
    - worker

Deploying Rancher 2.x using rke

Using RKE's pluggable user addons, it's possible to deploy Rancher 2.x server in HA with a single command. Detailed instructions can be found here.

Operating Systems Notes

Atomic OS

• Container volumes may have some issues in Atomic OS due to SELinux, most of volumes are mounted in rke with option z, however user still need to run the following commands before running rke:

# mkdir /opt/cni /etc/cni
# chcon -Rt svirt_sandbox_file_t /etc/cni
# chcon -Rt svirt_sandbox_file_t /opt/cni

• OpenSSH 6.4 shipped by default on Atomic CentOS which doesn't support SSH tunneling and therefore breaks rke, upgrading OpenSSH to the latest version supported by Atomic host will solve this problem:

# atomic host upgrade

• Atomic host doesn't come with docker group by default, you can change ownership of docker.sock to enable specific user to run rke:

# chown <user> /var/run/docker.sock

Etcd Backup and Restoration

You can configure a Rancher Kubernetes Engine (RKE) cluster to automatically create backups of etcd. In a disaster scenario, you can restore these backups, which are stored on other cluster nodes.

Etcd Regular Backup

To schedule a recurring automatic etcd backup, enable the etcd-backup service. etcd-backup runs in a service container alongside the etcd container. etcd-backup automatically creates backups and stores them to its local disk.

To enable etcd-backup in RKE CLI, configure the following three variables:

services:
  etcd:
    backup: true
    creation: 5m0s
    retention: 24h

• backup: Enables/disables etcd backups in the RKE cluster.

  Default value: false.

• creation: Time period in which etcd-backup creates and stores local backups.

  Default value: 5m0s

• retention: Time period before before an etcd backup expires. Expired backups are purged.

  Default value: 24h

After RKE runs, view the etcd-backup logs to confirm backups are being created automatically:

# docker logs etcd-backup
time="2018-05-04T18:39:16Z" level=info msg="Initializing Rolling Backups" creation=1m0s retention=24h0m0s
time="2018-05-04T18:40:16Z" level=info msg="Created backup" name="2018-05-04T18:40:16Z_etcd" runtime=108.332814ms
time="2018-05-04T18:41:16Z" level=info msg="Created backup" name="2018-05-04T18:41:16Z_etcd" runtime=92.880112ms
time="2018-05-04T18:42:16Z" level=info msg="Created backup" name="2018-05-04T18:42:16Z_etcd" runtime=83.67642ms
time="2018-05-04T18:43:16Z" level=info msg="Created backup" name="2018-05-04T18:43:16Z_etcd" runtime=86.298499ms

Backups are saved to the following directory: /opt/rke/etcdbackup/. Backups are created on each node that runs etcd.

Etcd onetime Snapshots

RKE also added two commands that for etcd backup management:

./rke etcd backup --name NAME

and

./rke etcd restore --name NAME

The backup command saves a snapshot of etcd from each etcd nodes in the cluster config file and will save it in /opt/rke/etcdbackup. This command also creates a container for the backup. When the backup completes, the container is removed.

# ./rke etcd backup --name snapshot --config cluster.yml

INFO[0000] Starting Backup on etcd hosts
INFO[0000] [dialer] Setup tunnel for host [x.x.x.x]
INFO[0002] [dialer] Setup tunnel for host [y.y.y.y]
INFO[0004] [dialer] Setup tunnel for host [z.z.z.z]
INFO[0006] [etcd] Starting backup on host [x.x.x.x]
INFO[0007] [etcd] Successfully started [etcd-backup-once] container on host [x.x.x.x]
INFO[0007] [etcd] Starting backup on host [y.y.y.y]
INFO[0009] [etcd] Successfully started [etcd-backup-once] container on host [y.y.y.y]
INFO[0010] [etcd] Starting backup on host [z.z.z.z]
INFO[0011] [etcd] Successfully started [etcd-backup-once] container on host [z.z.z.z]
INFO[0011] Finished backup on all etcd hosts

Etcd Disaster recovery

etcd restore is used for etcd Disaster recovery, it reverts to any snapshot stored in /opt/rke/etcdbackup that you explicitly define. When you run etcd restire, RKE removes the old etcd container if it still exists. To restore operations, RKE creates a new etcd cluster using the snapshot you choose.

Warning: Restoring an etcd backup deletes your current etcd cluster and replaces it with a new one. Before you run the etcd restore command, backup any important data in your current cluster.

./rke etcd restore --name snapshot --config cluster.yml
INFO[0000] Starting restore on etcd hosts
INFO[0000] [dialer] Setup tunnel for host [x.x.x.x]
INFO[0002] [dialer] Setup tunnel for host [y.y.y.y]
INFO[0005] [dialer] Setup tunnel for host [z.z.z.z]
INFO[0007] [hosts] Cleaning up host [x.x.x.x]
INFO[0007] [hosts] Running cleaner container on host [x.x.x.x]
INFO[0008] [kube-cleaner] Successfully started [kube-cleaner] container on host [x.x.x.x]
INFO[0008] [hosts] Removing cleaner container on host [x.x.x.x]
INFO[0008] [hosts] Successfully cleaned up host [x.x.x.x]
INFO[0009] [hosts] Cleaning up host [y.y.y.y]
INFO[0009] [hosts] Running cleaner container on host [y.y.y.y]
INFO[0010] [kube-cleaner] Successfully started [kube-cleaner] container on host [y.y.y.y]
INFO[0010] [hosts] Removing cleaner container on host [y.y.y.y]
INFO[0010] [hosts] Successfully cleaned up host [y.y.y.y]
INFO[0011] [hosts] Cleaning up host [z.z.z.z]
INFO[0011] [hosts] Running cleaner container on host [z.z.z.z]
INFO[0012] [kube-cleaner] Successfully started [kube-cleaner] container on host [z.z.z.z]
INFO[0012] [hosts] Removing cleaner container on host [z.z.z.z]
INFO[0012] [hosts] Successfully cleaned up host [z.z.z.z]
INFO[0012] [etcd] Restoring [snapshot] snapshot on etcd host [x.x.x.x]
INFO[0013] [etcd] Successfully started [etcd-restore] container on host [x.x.x.x]
INFO[0014] [etcd] Restoring [snapshot] snapshot on etcd host [y.y.y.y]
INFO[0015] [etcd] Successfully started [etcd-restore] container on host [y.y.y.y]
INFO[0015] [etcd] Restoring [snapshot] snapshot on etcd host [z.z.z.z]
INFO[0016] [etcd] Successfully started [etcd-restore] container on host [z.z.z.z]
INFO[0017] [etcd] Building up etcd plane..
INFO[0018] [etcd] Successfully started [etcd] container on host [x.x.x.x]
INFO[0020] [etcd] Successfully started [rke-log-linker] container on host [x.x.x.x]
INFO[0021] [remove/rke-log-linker] Successfully removed container on host [x.x.x.x]
INFO[0022] [etcd] Successfully started [etcd] container on host [y.y.y.y]
INFO[0023] [etcd] Successfully started [rke-log-linker] container on host [y.y.y.y]
INFO[0025] [remove/rke-log-linker] Successfully removed container on host [y.y.y.y]
INFO[0025] [etcd] Successfully started [etcd] container on host [z.z.z.z]
INFO[0027] [etcd] Successfully started [rke-log-linker] container on host [z.z.z.z]
INFO[0027] [remove/rke-log-linker] Successfully removed container on host [z.z.z.z]
INFO[0027] [etcd] Successfully started etcd plane..
INFO[0027] Finished restoring on all etcd hosts

License

Copyright (c) 2018 Rancher Labs, Inc.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.