icmp

package
v0.0.0-...-8b1022e Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 17, 2016 License: Apache-2.0, BSD-3-Clause Imports: 13 Imported by: 0

Documentation

Overview

Package icmp provides basic functions for the manipulation of messages used in the Internet Control Message Protocols, ICMPv4 and ICMPv6.

ICMPv4 and ICMPv6 are defined in RFC 792 and RFC 4443. Multi-part message support for ICMP is defined in RFC 4884. ICMP extensions for MPLS are defined in RFC 4950. ICMP extensions for interface and next-hop identification are defined in RFC 5837.

Index

Examples

Constants

This section is empty.

Variables

This section is empty.

Functions

func IPv6PseudoHeader 

func IPv6PseudoHeader(src, dst net.IP) []byte

IPv6PseudoHeader returns an IPv6 pseudo header for checksum calculation.

func ParseIPv4Header 

func ParseIPv4Header(b []byte) (*ipv4.Header, error)

ParseIPv4Header parses b as an IPv4 header of ICMP error message invoking packet, which is contained in ICMP error message.

Types

type DefaultMessageBody 

type DefaultMessageBody struct {
	Data []byte // data
}

A DefaultMessageBody represents the default message body.

func (*DefaultMessageBody) Len 

func (p *DefaultMessageBody) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*DefaultMessageBody) Marshal 

func (p *DefaultMessageBody) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type DstUnreach 

type DstUnreach struct {
	Data       []byte      // data, known as original datagram field
	Extensions []Extension // extensions
}

A DstUnreach represents an ICMP destination unreachable message body.

func (*DstUnreach) Len 

func (p *DstUnreach) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*DstUnreach) Marshal 

func (p *DstUnreach) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type Echo 

type Echo struct {
	ID   int    // identifier
	Seq  int    // sequence number
	Data []byte // data
}

An Echo represents an ICMP echo request or reply message body.

func (*Echo) Len 

func (p *Echo) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*Echo) Marshal 

func (p *Echo) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type Extension 

type Extension interface {
	// Len returns the length of ICMP extension.
	// Proto must be either the ICMPv4 or ICMPv6 protocol number.
	Len(proto int) int

	// Marshal returns the binary encoding of ICMP extension.
	// Proto must be either the ICMPv4 or ICMPv6 protocol number.
	Marshal(proto int) ([]byte, error)
}

An Extension represents an ICMP extension.

type InterfaceInfo 

type InterfaceInfo struct {
	Class     int // extension object class number
	Type      int // extension object sub-type
	Interface *net.Interface
	Addr      *net.IPAddr
}

An InterfaceInfo represents interface and next-hop identification.

func (*InterfaceInfo) Len 

func (ifi *InterfaceInfo) Len(proto int) int

Len implements the Len method of Extension interface.

func (*InterfaceInfo) Marshal 

func (ifi *InterfaceInfo) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of Extension interface.

type MPLSLabel 

type MPLSLabel struct {
	Label int  // label value
	TC    int  // traffic class; formerly experimental use
	S     bool // bottom of stack
	TTL   int  // time to live
}

A MPLSLabel represents a MPLS label stack entry.

type MPLSLabelStack 

type MPLSLabelStack struct {
	Class  int // extension object class number
	Type   int // extension object sub-type
	Labels []MPLSLabel
}

A MPLSLabelStack represents a MPLS label stack.

func (*MPLSLabelStack) Len 

func (ls *MPLSLabelStack) Len(proto int) int

Len implements the Len method of Extension interface.

func (*MPLSLabelStack) Marshal 

func (ls *MPLSLabelStack) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of Extension interface.

type Message 

type Message struct {
	Type     Type        // type, either ipv4.ICMPType or ipv6.ICMPType
	Code     int         // code
	Checksum int         // checksum
	Body     MessageBody // body
}

A Message represents an ICMP message.

func ParseMessage 

func ParseMessage(proto int, b []byte) (*Message, error)

ParseMessage parses b as an ICMP message. Proto must be either the ICMPv4 or ICMPv6 protocol number.

func (*Message) Marshal 

func (m *Message) Marshal(psh []byte) ([]byte, error)

Marshal returns the binary encoding of the ICMP message m.

For an ICMPv4 message, the returned message always contains the calculated checksum field.

For an ICMPv6 message, the returned message contains the calculated checksum field when psh is not nil, otherwise the kernel will compute the checksum field during the message transmission. When psh is not nil, it must be the pseudo header for IPv6.

type MessageBody 

type MessageBody interface {
	// Len returns the length of ICMP message body.
	// Proto must be either the ICMPv4 or ICMPv6 protocol number.
	Len(proto int) int

	// Marshal returns the binary encoding of ICMP message body.
	// Proto must be either the ICMPv4 or ICMPv6 protocol number.
	Marshal(proto int) ([]byte, error)
}

A MessageBody represents an ICMP message body.

type PacketConn 

type PacketConn struct {
	// contains filtered or unexported fields
}

A PacketConn represents a packet network endpoint that uses either ICMPv4 or ICMPv6.

Example (NonPrivilegedPing) 
package main

import (
	"log"
	"net"
	"os"
	"runtime"

	"golang.org/x/net/icmp"
	"golang.org/x/net/ipv6"
)

func main() {
	switch runtime.GOOS {
	case "darwin":
	case "linux":
		log.Println("you may need to adjust the net.ipv4.ping_group_range kernel state")
	default:
		log.Println("not supported on", runtime.GOOS)
		return
	}

	c, err := icmp.ListenPacket("udp6", "fe80::1%en0")
	if err != nil {
		log.Fatal(err)
	}
	defer c.Close()

	wm := icmp.Message{
		Type: ipv6.ICMPTypeEchoRequest, Code: 0,
		Body: &icmp.Echo{
			ID: os.Getpid() & 0xffff, Seq: 1,
			Data: []byte("HELLO-R-U-THERE"),
		},
	}
	wb, err := wm.Marshal(nil)
	if err != nil {
		log.Fatal(err)
	}
	if _, err := c.WriteTo(wb, &net.UDPAddr{IP: net.ParseIP("ff02::1"), Zone: "en0"}); err != nil {
		log.Fatal(err)
	}

	rb := make([]byte, 1500)
	n, peer, err := c.ReadFrom(rb)
	if err != nil {
		log.Fatal(err)
	}
	rm, err := icmp.ParseMessage(58, rb[:n])
	if err != nil {
		log.Fatal(err)
	}
	switch rm.Type {
	case ipv6.ICMPTypeEchoReply:
		log.Printf("got reflection from %v", peer)
	default:
		log.Printf("got %+v; want echo reply", rm)
	}
}

Output:

func ListenPacket 

func ListenPacket(network, address string) (*PacketConn, error)

ListenPacket listens for incoming ICMP packets addressed to address. See net.Dial for the syntax of address.

For non-privileged datagram-oriented ICMP endpoints, network must be "udp4" or "udp6". The endpoint allows to read, write a few limited ICMP messages such as echo request and echo reply. Currently only Darwin and Linux support this.

Examples: 

ListenPacket("udp4", "192.168.0.1")
ListenPacket("udp4", "0.0.0.0")
ListenPacket("udp6", "fe80::1%en0")
ListenPacket("udp6", "::")

For privileged raw ICMP endpoints, network must be "ip4" or "ip6" followed by a colon and an ICMP protocol number or name.

Examples: 

ListenPacket("ip4:icmp", "192.168.0.1")
ListenPacket("ip4:1", "0.0.0.0")
ListenPacket("ip6:ipv6-icmp", "fe80::1%en0")
ListenPacket("ip6:58", "::")

func (*PacketConn) Close 

func (c *PacketConn) Close() error

Close closes the endpoint.

func (*PacketConn) IPv4PacketConn 

func (c *PacketConn) IPv4PacketConn() *ipv4.PacketConn

IPv4PacketConn returns the ipv4.PacketConn of c. It returns nil when c is not created as the endpoint for ICMPv4.

func (*PacketConn) IPv6PacketConn 

func (c *PacketConn) IPv6PacketConn() *ipv6.PacketConn

IPv6PacketConn returns the ipv6.PacketConn of c. It returns nil when c is not created as the endpoint for ICMPv6.

func (*PacketConn) LocalAddr 

func (c *PacketConn) LocalAddr() net.Addr

LocalAddr returns the local network address.

func (*PacketConn) ReadFrom 

func (c *PacketConn) ReadFrom(b []byte) (int, net.Addr, error)

ReadFrom reads an ICMP message from the connection.

func (*PacketConn) SetDeadline 

func (c *PacketConn) SetDeadline(t time.Time) error

SetDeadline sets the read and write deadlines associated with the endpoint.

func (*PacketConn) SetReadDeadline 

func (c *PacketConn) SetReadDeadline(t time.Time) error

SetReadDeadline sets the read deadline associated with the endpoint.

func (*PacketConn) SetWriteDeadline 

func (c *PacketConn) SetWriteDeadline(t time.Time) error

SetWriteDeadline sets the write deadline associated with the endpoint.

func (*PacketConn) WriteTo 

func (c *PacketConn) WriteTo(b []byte, dst net.Addr) (int, error)

WriteTo writes the ICMP message b to dst. Dst must be net.UDPAddr when c is a non-privileged datagram-oriented ICMP endpoint. Otherwise it must be net.IPAddr.

type PacketTooBig 

type PacketTooBig struct {
	MTU  int    // maximum transmission unit of the nexthop link
	Data []byte // data, known as original datagram field
}

A PacketTooBig represents an ICMP packet too big message body.

func (*PacketTooBig) Len 

func (p *PacketTooBig) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*PacketTooBig) Marshal 

func (p *PacketTooBig) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type ParamProb 

type ParamProb struct {
	Pointer    uintptr     // offset within the data where the error was detected
	Data       []byte      // data, known as original datagram field
	Extensions []Extension // extensions
}

A ParamProb represents an ICMP parameter problem message body.

func (*ParamProb) Len 

func (p *ParamProb) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*ParamProb) Marshal 

func (p *ParamProb) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type TimeExceeded 

type TimeExceeded struct {
	Data       []byte      // data, known as original datagram field
	Extensions []Extension // extensions
}

A TimeExceeded represents an ICMP time exceeded message body.

func (*TimeExceeded) Len 

func (p *TimeExceeded) Len(proto int) int

Len implements the Len method of MessageBody interface.

func (*TimeExceeded) Marshal 

func (p *TimeExceeded) Marshal(proto int) ([]byte, error)

Marshal implements the Marshal method of MessageBody interface.

type Type 

type Type interface {
	Protocol() int
}

A Type represents an ICMP message type.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.