build

package
v3.7.2+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 15, 2018 License: Apache-2.0 Imports: 13 Imported by: 0

Documentation

Overview

+groupName=build.openshift.io Package api is the internal version of the API.

Index

Constants

View Source 
const (
	GroupName       = "build.openshift.io"
	LegacyGroupName = ""
)
View Source 
const (
	// BuildAnnotation is an annotation that identifies a Pod as being for a Build
	BuildAnnotation = "openshift.io/build.name"
	// BuildConfigAnnotation is an annotation that identifies the BuildConfig that a Build was created from
	BuildConfigAnnotation = "openshift.io/build-config.name"
	// BuildNumberAnnotation is an annotation whose value is the sequential number for this Build
	BuildNumberAnnotation = "openshift.io/build.number"
	// BuildCloneAnnotation is an annotation whose value is the name of the build this build was cloned from
	BuildCloneAnnotation = "openshift.io/build.clone-of"
	// BuildPodNameAnnotation is an annotation whose value is the name of the pod running this build
	BuildPodNameAnnotation = "openshift.io/build.pod-name"
	// BuildJenkinsStatusJSONAnnotation is an annotation holding the Jenkins status information
	BuildJenkinsStatusJSONAnnotation = "openshift.io/jenkins-status-json"
	// BuildJenkinsLogURLAnnotation is an annotation holding a link to the raw Jenkins build console log
	BuildJenkinsLogURLAnnotation = "openshift.io/jenkins-log-url"
	// BuildJenkinsConsoleLogURLAnnotation is an annotation holding a link to the Jenkins build console log (including Jenkins chrome wrappering)
	BuildJenkinsConsoleLogURLAnnotation = "openshift.io/jenkins-console-log-url"
	// BuildJenkinsBlueOceanLogURLAnnotation is an annotation holding a link to the Jenkins build console log via the Jenkins BlueOcean UI Plugin
	BuildJenkinsBlueOceanLogURLAnnotation = "openshift.io/jenkins-blueocean-log-url"
	// BuildJenkinsBuildURIAnnotation is an annotation holding a link to the Jenkins build
	BuildJenkinsBuildURIAnnotation = "openshift.io/jenkins-build-uri"
	// BuildSourceSecretMatchURIAnnotationPrefix is a prefix for annotations on a Secret which indicate a source URI against which the Secret can be used
	BuildSourceSecretMatchURIAnnotationPrefix = "build.openshift.io/source-secret-match-uri-"
	// BuildLabel is the key of a Pod label whose value is the Name of a Build which is run.
	// NOTE: The value for this label may not contain the entire Build name because it will be
	// truncated to maximum label length.
	BuildLabel = "openshift.io/build.name"
	// BuildRunPolicyLabel represents the start policy used to to start the build.
	BuildRunPolicyLabel = "openshift.io/build.start-policy"
	// DefaultDockerLabelNamespace is the key of a Build label, whose values are build metadata.
	DefaultDockerLabelNamespace = "io.openshift."
	// OriginVersion is an environment variable key that indicates the version of origin that
	// created this build definition.
	OriginVersion = "ORIGIN_VERSION"
	// AllowedUIDs is an environment variable that contains ranges of UIDs that are allowed in
	// Source builder images
	AllowedUIDs = "ALLOWED_UIDS"
	// DropCapabilities is an environment variable that contains a list of capabilities to drop when
	// executing a Source build
	DropCapabilities = "DROP_CAPS"
	// BuildConfigLabel is the key of a Build label whose value is the ID of a BuildConfig
	// on which the Build is based. NOTE: The value for this label may not contain the entire
	// BuildConfig name because it will be truncated to maximum label length.
	BuildConfigLabel = "openshift.io/build-config.name"
	// BuildConfigLabelDeprecated was used as BuildConfigLabel before adding namespaces.
	// We keep it for backward compatibility.
	BuildConfigLabelDeprecated = "buildconfig"
	// BuildConfigPausedAnnotation is an annotation that marks a BuildConfig as paused.
	// New Builds cannot be instantiated from a paused BuildConfig.
	BuildConfigPausedAnnotation = "openshift.io/build-config.paused"
	// BuildAcceptedAnnotation is an annotation used to update a build that can now be
	// run based on the RunPolicy (e.g. Serial). Updating the build with this annotation
	// forces the build to be processed by the build controller queue without waiting
	// for a resync.
	BuildAcceptedAnnotation = "build.openshift.io/accepted"

	// BuildStartedEventReason is the reason associated with the event registered when a build is started (pod is created).
	BuildStartedEventReason = "BuildStarted"
	// BuildStartedEventMessage is the message associated with the event registered when a build is started (pod is created).
	BuildStartedEventMessage = "Build %s/%s is now running"
	// BuildCompletedEventReason is the reason associated with the event registered when build completes successfully.
	BuildCompletedEventReason = "BuildCompleted"
	// BuildCompletedEventMessage is the message associated with the event registered when build completes successfully.
	BuildCompletedEventMessage = "Build %s/%s completed successfully"
	// BuildFailedEventReason is the reason associated with the event registered when build fails.
	BuildFailedEventReason = "BuildFailed"
	// BuildFailedEventMessage is the message associated with the event registered when build fails.
	BuildFailedEventMessage = "Build %s/%s failed"
	// BuildCancelledEventReason is the reason associated with the event registered when build is cancelled.
	BuildCancelledEventReason = "BuildCancelled"
	// BuildCancelledEventMessage is the message associated with the event registered when build is cancelled.
	BuildCancelledEventMessage = "Build %s/%s has been cancelled"

	// DefaultSuccessfulBuildsHistoryLimit is the default number of successful builds to retain
	// if the buildconfig does not specify a value.  This only applies to buildconfigs created
	// via the new group api resource, not the legacy resource.
	DefaultSuccessfulBuildsHistoryLimit = int32(5)

	// DefaultFailedBuildsHistoryLimit is the default number of failed builds to retain
	// if the buildconfig does not specify a value.  This only applies to buildconfigs created
	// via the new group api resource, not the legacy resource.
	DefaultFailedBuildsHistoryLimit = int32(5)
)
View Source 
const (
	BuildTriggerCauseManualMsg    = "Manually triggered"
	BuildTriggerCauseConfigMsg    = "Build configuration change"
	BuildTriggerCauseImageMsg     = "Image change"
	BuildTriggerCauseGithubMsg    = "GitHub WebHook"
	BuildTriggerCauseGenericMsg   = "Generic WebHook"
	BuildTriggerCauseGitLabMsg    = "GitLab WebHook"
	BuildTriggerCauseBitbucketMsg = "Bitbucket WebHook"
)
View Source 
const (
	StatusMessageCannotCreateBuildPodSpec        = "Failed to create pod spec."
	StatusMessageCannotCreateBuildPod            = "Failed creating build pod."
	StatusMessageInvalidOutputRef                = "Output image could not be resolved."
	StatusMessageInvalidImageRef                 = "Referenced image could not be resolved."
	StatusMessageCancelBuildFailed               = "Failed to cancel build."
	StatusMessageBuildPodDeleted                 = "The pod for this build was deleted before the build completed."
	StatusMessageExceededRetryTimeout            = "Build did not complete and retrying timed out."
	StatusMessageMissingPushSecret               = "Missing push secret."
	StatusMessagePostCommitHookFailed            = "Build failed because of post commit hook."
	StatusMessagePushImageToRegistryFailed       = "Failed to push the image to the registry."
	StatusMessagePullBuilderImageFailed          = "Failed pulling builder image."
	StatusMessageFetchSourceFailed               = "Failed to fetch the input source."
	StatusMessageInvalidContextDirectory         = "The supplied context directory does not exist."
	StatusMessageCancelledBuild                  = "The build was cancelled by the user."
	StatusMessageDockerBuildFailed               = "Docker build strategy has failed."
	StatusMessageBuildPodExists                  = "The pod for this build already exists and is older than the build."
	StatusMessageNoBuildContainerStatus          = "The pod for this build has no container statuses indicating success or failure."
	StatusMessageFailedContainer                 = "The pod for this build has at least one container with a non-zero exit status."
	StatusMessageGenericBuildFailed              = "Generic Build failure - check logs for details."
	StatusMessageUnresolvableEnvironmentVariable = "Unable to resolve build environment variable reference."
	StatusMessageCannotRetrieveServiceAccount    = "Unable to look up the service account associated with this build."
)

NOTE: These messages might change.

View Source 
const (
	// BuildPodSuffix is the suffix used to append to a build pod name given a build name
	BuildPodSuffix = "build"
)
View Source 
const (
	// CustomBuildStrategyBaseImageKey is the environment variable that indicates the base image to be used when
	// performing a custom build, if needed.
	CustomBuildStrategyBaseImageKey = "OPENSHIFT_CUSTOM_BUILD_BASE_IMAGE"
)

Variables

View Source 
var (
	SchemeGroupVersion       = schema.GroupVersion{Group: GroupName, Version: runtime.APIVersionInternal}
	LegacySchemeGroupVersion = schema.GroupVersion{Group: LegacyGroupName, Version: runtime.APIVersionInternal}

	LegacySchemeBuilder    = runtime.NewSchemeBuilder(addLegacyKnownTypes)
	AddToSchemeInCoreGroup = LegacySchemeBuilder.AddToScheme

	SchemeBuilder = runtime.NewSchemeBuilder(addKnownTypes)
	AddToScheme   = SchemeBuilder.AddToScheme
)
View Source 
var KnownTriggerTypes = sets.NewString(
	string(GitHubWebHookBuildTriggerType),
	string(GenericWebHookBuildTriggerType),
	string(ImageChangeBuildTriggerType),
	string(ConfigChangeBuildTriggerType),
	string(GitLabWebHookBuildTriggerType),
	string(BitbucketWebHookBuildTriggerType),
)

NOTE: Adding a new trigger type requires adding the type to KnownTriggerTypes

View Source 
var (
	// WhitelistEnvVarNames is a list of environment variable keys that are allowed to be set by the
	// user on the build pod.
	WhitelistEnvVarNames = [2]string{"BUILD_LOGLEVEL", "GIT_SSL_NO_VERIFY"}
)

Functions

func BuildFieldSelector 

func BuildFieldSelector(obj runtime.Object, fieldSet fields.Set) error

func BuildToPodLogOptions 

func BuildToPodLogOptions(opts *BuildLogOptions) *kapi.PodLogOptions

BuildToPodLogOptions builds a PodLogOptions object out of a BuildLogOptions. Currently BuildLogOptions.Container and BuildLogOptions.Previous aren't used so they won't be copied to PodLogOptions.

func DeepCopy_build_BinaryBuildRequestOptions 

func DeepCopy_build_BinaryBuildRequestOptions(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BinaryBuildRequestOptions is an autogenerated deepcopy function.

func DeepCopy_build_BinaryBuildSource 

func DeepCopy_build_BinaryBuildSource(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BinaryBuildSource is an autogenerated deepcopy function.

func DeepCopy_build_BitbucketWebHookCause 

func DeepCopy_build_BitbucketWebHookCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BitbucketWebHookCause is an autogenerated deepcopy function.

func DeepCopy_build_Build 

func DeepCopy_build_Build(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_Build is an autogenerated deepcopy function.

func DeepCopy_build_BuildConfig 

func DeepCopy_build_BuildConfig(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildConfig is an autogenerated deepcopy function.

func DeepCopy_build_BuildConfigList 

func DeepCopy_build_BuildConfigList(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildConfigList is an autogenerated deepcopy function.

func DeepCopy_build_BuildConfigSpec 

func DeepCopy_build_BuildConfigSpec(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildConfigSpec is an autogenerated deepcopy function.

func DeepCopy_build_BuildConfigStatus 

func DeepCopy_build_BuildConfigStatus(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildConfigStatus is an autogenerated deepcopy function.

func DeepCopy_build_BuildList 

func DeepCopy_build_BuildList(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildList is an autogenerated deepcopy function.

func DeepCopy_build_BuildLog 

func DeepCopy_build_BuildLog(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildLog is an autogenerated deepcopy function.

func DeepCopy_build_BuildLogOptions 

func DeepCopy_build_BuildLogOptions(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildLogOptions is an autogenerated deepcopy function.

func DeepCopy_build_BuildOutput 

func DeepCopy_build_BuildOutput(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildOutput is an autogenerated deepcopy function.

func DeepCopy_build_BuildPostCommitSpec 

func DeepCopy_build_BuildPostCommitSpec(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildPostCommitSpec is an autogenerated deepcopy function.

func DeepCopy_build_BuildRequest 

func DeepCopy_build_BuildRequest(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildRequest is an autogenerated deepcopy function.

func DeepCopy_build_BuildSource 

func DeepCopy_build_BuildSource(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildSource is an autogenerated deepcopy function.

func DeepCopy_build_BuildSpec 

func DeepCopy_build_BuildSpec(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildSpec is an autogenerated deepcopy function.

func DeepCopy_build_BuildStatus 

func DeepCopy_build_BuildStatus(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildStatus is an autogenerated deepcopy function.

func DeepCopy_build_BuildStatusOutput 

func DeepCopy_build_BuildStatusOutput(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildStatusOutput is an autogenerated deepcopy function.

func DeepCopy_build_BuildStatusOutputTo 

func DeepCopy_build_BuildStatusOutputTo(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildStatusOutputTo is an autogenerated deepcopy function.

func DeepCopy_build_BuildStrategy 

func DeepCopy_build_BuildStrategy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildStrategy is an autogenerated deepcopy function.

func DeepCopy_build_BuildTriggerCause 

func DeepCopy_build_BuildTriggerCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildTriggerCause is an autogenerated deepcopy function.

func DeepCopy_build_BuildTriggerPolicy 

func DeepCopy_build_BuildTriggerPolicy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_BuildTriggerPolicy is an autogenerated deepcopy function.

func DeepCopy_build_CommonSpec 

func DeepCopy_build_CommonSpec(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_CommonSpec is an autogenerated deepcopy function.

func DeepCopy_build_CommonWebHookCause 

func DeepCopy_build_CommonWebHookCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_CommonWebHookCause is an autogenerated deepcopy function.

func DeepCopy_build_CustomBuildStrategy 

func DeepCopy_build_CustomBuildStrategy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_CustomBuildStrategy is an autogenerated deepcopy function.

func DeepCopy_build_DockerBuildStrategy 

func DeepCopy_build_DockerBuildStrategy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_DockerBuildStrategy is an autogenerated deepcopy function.

func DeepCopy_build_DockerStrategyOptions 

func DeepCopy_build_DockerStrategyOptions(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_DockerStrategyOptions is an autogenerated deepcopy function.

func DeepCopy_build_GenericWebHookCause 

func DeepCopy_build_GenericWebHookCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GenericWebHookCause is an autogenerated deepcopy function.

func DeepCopy_build_GenericWebHookEvent 

func DeepCopy_build_GenericWebHookEvent(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GenericWebHookEvent is an autogenerated deepcopy function.

func DeepCopy_build_GitBuildSource 

func DeepCopy_build_GitBuildSource(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitBuildSource is an autogenerated deepcopy function.

func DeepCopy_build_GitHubWebHookCause 

func DeepCopy_build_GitHubWebHookCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitHubWebHookCause is an autogenerated deepcopy function.

func DeepCopy_build_GitInfo 

func DeepCopy_build_GitInfo(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitInfo is an autogenerated deepcopy function.

func DeepCopy_build_GitLabWebHookCause 

func DeepCopy_build_GitLabWebHookCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitLabWebHookCause is an autogenerated deepcopy function.

func DeepCopy_build_GitRefInfo 

func DeepCopy_build_GitRefInfo(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitRefInfo is an autogenerated deepcopy function.

func DeepCopy_build_GitSourceRevision 

func DeepCopy_build_GitSourceRevision(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_GitSourceRevision is an autogenerated deepcopy function.

func DeepCopy_build_ImageChangeCause 

func DeepCopy_build_ImageChangeCause(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ImageChangeCause is an autogenerated deepcopy function.

func DeepCopy_build_ImageChangeTrigger 

func DeepCopy_build_ImageChangeTrigger(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ImageChangeTrigger is an autogenerated deepcopy function.

func DeepCopy_build_ImageLabel 

func DeepCopy_build_ImageLabel(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ImageLabel is an autogenerated deepcopy function.

func DeepCopy_build_ImageSource 

func DeepCopy_build_ImageSource(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ImageSource is an autogenerated deepcopy function.

func DeepCopy_build_ImageSourcePath 

func DeepCopy_build_ImageSourcePath(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ImageSourcePath is an autogenerated deepcopy function.

func DeepCopy_build_JenkinsPipelineBuildStrategy 

func DeepCopy_build_JenkinsPipelineBuildStrategy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_JenkinsPipelineBuildStrategy is an autogenerated deepcopy function.

func DeepCopy_build_ProxyConfig 

func DeepCopy_build_ProxyConfig(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_ProxyConfig is an autogenerated deepcopy function.

func DeepCopy_build_SecretBuildSource 

func DeepCopy_build_SecretBuildSource(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SecretBuildSource is an autogenerated deepcopy function.

func DeepCopy_build_SecretSpec 

func DeepCopy_build_SecretSpec(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SecretSpec is an autogenerated deepcopy function.

func DeepCopy_build_SourceBuildStrategy 

func DeepCopy_build_SourceBuildStrategy(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SourceBuildStrategy is an autogenerated deepcopy function.

func DeepCopy_build_SourceControlUser 

func DeepCopy_build_SourceControlUser(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SourceControlUser is an autogenerated deepcopy function.

func DeepCopy_build_SourceRevision 

func DeepCopy_build_SourceRevision(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SourceRevision is an autogenerated deepcopy function.

func DeepCopy_build_SourceStrategyOptions 

func DeepCopy_build_SourceStrategyOptions(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_SourceStrategyOptions is an autogenerated deepcopy function.

func DeepCopy_build_StageInfo 

func DeepCopy_build_StageInfo(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_StageInfo is an autogenerated deepcopy function.

func DeepCopy_build_StepInfo 

func DeepCopy_build_StepInfo(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_StepInfo is an autogenerated deepcopy function.

func DeepCopy_build_WebHookTrigger 

func DeepCopy_build_WebHookTrigger(in interface{}, out interface{}, c *conversion.Cloner) error

DeepCopy_build_WebHookTrigger is an autogenerated deepcopy function.

func GetBuildPodName 

func GetBuildPodName(build *Build) string

GetBuildPodName returns name of the build pod.

func GetInputReference 

func GetInputReference(strategy BuildStrategy) *kapi.ObjectReference

GetInputReference returns the From ObjectReference associated with the BuildStrategy.

func HasTriggerType 

func HasTriggerType(triggerType BuildTriggerType, bc *BuildConfig) bool

func IsKindOrLegacy 

func IsKindOrLegacy(kind string, gk schema.GroupKind) bool

IsKindOrLegacy checks if the provided GroupKind matches with the given kind by looking up the API group and also the legacy API.

func IsResourceOrLegacy 

func IsResourceOrLegacy(resource string, gr schema.GroupResource) bool

IsResourceOrLegacy checks if the provided GroupResources matches with the given resource by looking up the API group and also the legacy API.

func Kind 

func Kind(kind string) schema.GroupKind

Kind takes an unqualified kind and returns back a Group qualified GroupKind

func LabelValue 

func LabelValue(name string) string

LabelValue returns a string to use as a value for the Build label in a pod. If the length of the string parameter exceeds the maximum label length, the value will be truncated.

func LegacyKind 

func LegacyKind(kind string) schema.GroupKind

LegacyKind takes an unqualified kind and returns back a Group qualified GroupKind

func LegacyResource 

func LegacyResource(resource string) schema.GroupResource

LegacyResource takes an unqualified resource and returns back a Group qualified GroupResource

func RegisterDeepCopies 

func RegisterDeepCopies(scheme *runtime.Scheme) error

RegisterDeepCopies adds deep-copy functions to the given scheme. Public to allow building arbitrary schemes.

func Resource 

func Resource(resource string) schema.GroupResource

Resource takes an unqualified resource and returns back a Group qualified GroupResource

func SourceType 

func SourceType(source BuildSource) string

func StrategyType 

func StrategyType(strategy BuildStrategy) string

Types

type BinaryBuildRequestOptions 

type BinaryBuildRequestOptions struct {
	metav1.TypeMeta
	metav1.ObjectMeta

	AsFile string

	// Commit is the value identifying a specific commit
	Commit string

	// Message is the description of a specific commit
	Message string

	// AuthorName of the source control user
	AuthorName string

	// AuthorEmail of the source control user
	AuthorEmail string

	// CommitterName of the source control user
	CommitterName string

	// CommitterEmail of the source control user
	CommitterEmail string
}

type BinaryBuildSource 

type BinaryBuildSource struct {
	// AsFile indicates that the provided binary input should be considered a single file
	// within the build input. For example, specifying "webapp.war" would place the provided
	// binary as `/webapp.war` for the builder. If left empty, the Docker and Source build
	// strategies assume this file is a zip, tar, or tar.gz file and extract it as the source.
	// The custom strategy receives this binary as standard input. This filename may not
	// contain slashes or be '..' or '.'.
	AsFile string
}

type BitbucketWebHookCause 

type BitbucketWebHookCause struct {
	CommonWebHookCause
}

BitbucketWebHookCause has information about a Bitbucket webhook that triggered a build.

type Build 

type Build struct {
	metav1.TypeMeta
	metav1.ObjectMeta

	// Spec is all the inputs used to execute the build.
	Spec BuildSpec

	// Status is the current status of the build.
	Status BuildStatus
}

Build encapsulates the inputs needed to produce a new deployable image, as well as the status of the execution and a reference to the Pod which executed the build.

func FilterBuilds 

func FilterBuilds(builds []Build, predicate PredicateFunc) []Build

FilterBuilds returns array of builds that satisfies predicate function.

type BuildConfig 

type BuildConfig struct {
	metav1.TypeMeta
	metav1.ObjectMeta

	// Spec holds all the input necessary to produce a new build, and the conditions when
	// to trigger them.
	Spec BuildConfigSpec
	// Status holds any relevant information about a build config
	Status BuildConfigStatus
}

BuildConfig is a template which can be used to create new builds.

type BuildConfigList 

type BuildConfigList struct {
	metav1.TypeMeta
	metav1.ListMeta

	// Items is a list of build configs
	Items []BuildConfig
}

BuildConfigList is a collection of BuildConfigs.

type BuildConfigSpec 

type BuildConfigSpec struct {
	// Triggers determine how new Builds can be launched from a BuildConfig. If
	// no triggers are defined, a new build can only occur as a result of an
	// explicit client build creation.
	Triggers []BuildTriggerPolicy

	// RunPolicy describes how the new build created from this build
	// configuration will be scheduled for execution.
	// This is optional, if not specified we default to "Serial".
	RunPolicy BuildRunPolicy

	// CommonSpec is the desired build specification
	CommonSpec

	// SuccessfulBuildsHistoryLimit is the number of old successful builds to retain.
	// This field is a pointer to allow for differentiation between an explicit zero and not specified.
	SuccessfulBuildsHistoryLimit *int32

	// FailedBuildsHistoryLimit is the number of old failed builds to retain.
	// This field is a pointer to allow for differentiation between an explicit zero and not specified.
	FailedBuildsHistoryLimit *int32
}

BuildConfigSpec describes when and how builds are created

type BuildConfigStatus 

type BuildConfigStatus struct {
	// LastVersion is used to inform about number of last triggered build.
	LastVersion int64
}

BuildConfigStatus contains current state of the build config object.

type BuildList 

type BuildList struct {
	metav1.TypeMeta
	metav1.ListMeta

	// Items is a list of builds
	Items []Build
}

BuildList is a collection of Builds.

type BuildLog 

type BuildLog struct {
	metav1.TypeMeta
}

BuildLog is the (unused) resource associated with the build log redirector

type BuildLogOptions 

type BuildLogOptions struct {
	metav1.TypeMeta

	// Container for which to return logs
	Container string
	// Follow if true indicates that the build log should be streamed until
	// the build terminates.
	Follow bool
	// If true, return previous build logs.
	Previous bool
	// A relative time in seconds before the current time from which to show logs. If this value
	// precedes the time a pod was started, only logs since the pod start will be returned.
	// If this value is in the future, no logs will be returned.
	// Only one of sinceSeconds or sinceTime may be specified.
	SinceSeconds *int64
	// An RFC3339 timestamp from which to show logs. If this value
	// precedes the time a pod was started, only logs since the pod start will be returned.
	// If this value is in the future, no logs will be returned.
	// Only one of sinceSeconds or sinceTime may be specified.
	SinceTime *metav1.Time
	// If true, add an RFC3339 or RFC3339Nano timestamp at the beginning of every line
	// of log output.
	Timestamps bool
	// If set, the number of lines from the end of the logs to show. If not specified,
	// logs are shown from the creation of the container or sinceSeconds or sinceTime
	TailLines *int64
	// If set, the number of bytes to read from the server before terminating the
	// log output. This may not display a complete final line of logging, and may return
	// slightly more or slightly less than the specified limit.
	LimitBytes *int64

	// NoWait if true causes the call to return immediately even if the build
	// is not available yet. Otherwise the server will wait until the build has started.
	NoWait bool

	// Version of the build for which to view logs.
	Version *int64
}

BuildLogOptions is the REST options for a build log

type BuildOutput 

type BuildOutput struct {
	// To defines an optional location to push the output of this build to.
	// Kind must be one of 'ImageStreamTag' or 'DockerImage'.
	// This value will be used to look up a Docker image repository to push to.
	// In the case of an ImageStreamTag, the ImageStreamTag will be looked for in the namespace of
	// the build unless Namespace is specified.
	To *kapi.ObjectReference

	// PushSecret is the name of a Secret that would be used for setting
	// up the authentication for executing the Docker push to authentication
	// enabled Docker Registry (or Docker Hub).
	PushSecret *kapi.LocalObjectReference

	// ImageLabels define a list of labels that are applied to the resulting image. If there
	// are multiple labels with the same name then the last one in the list is used.
	ImageLabels []ImageLabel
}

BuildOutput is input to a build strategy and describes the Docker image that the strategy should produce.

type BuildPhase 

type BuildPhase string

BuildPhase represents the status of a build at a point in time. 

const (
	// BuildPhaseNew is automatically assigned to a newly created build.
	BuildPhaseNew BuildPhase = "New"

	// BuildPhasePending indicates that a pod name has been assigned and a build is
	// about to start running.
	BuildPhasePending BuildPhase = "Pending"

	// BuildPhaseRunning indicates that a pod has been created and a build is running.
	BuildPhaseRunning BuildPhase = "Running"

	// BuildPhaseComplete indicates that a build has been successful.
	BuildPhaseComplete BuildPhase = "Complete"

	// BuildPhaseFailed indicates that a build has executed and failed.
	BuildPhaseFailed BuildPhase = "Failed"

	// BuildPhaseError indicates that an error prevented the build from executing.
	BuildPhaseError BuildPhase = "Error"

	// BuildPhaseCancelled indicates that a running/pending build was stopped from executing.
	BuildPhaseCancelled BuildPhase = "Cancelled"
)

Valid values for BuildPhase.

type BuildPostCommitSpec 

type BuildPostCommitSpec struct {
	// Command is the command to run. It may not be specified with Script.
	// This might be needed if the image doesn't have `/bin/sh`, or if you
	// do not want to use a shell. In all other cases, using Script might be
	// more convenient.
	Command []string
	// Args is a list of arguments that are provided to either Command,
	// Script or the Docker image's default entrypoint. The arguments are
	// placed immediately after the command to be run.
	Args []string
	// Script is a shell script to be run with `/bin/sh -ic`. It may not be
	// specified with Command. Use Script when a shell script is appropriate
	// to execute the post build hook, for example for running unit tests
	// with `rake test`. If you need control over the image entrypoint, or
	// if the image does not have `/bin/sh`, use Command and/or Args.
	// The `-i` flag is needed to support CentOS and RHEL images that use
	// Software Collections (SCL), in order to have the appropriate
	// collections enabled in the shell. E.g., in the Ruby image, this is
	// necessary to make `ruby`, `bundle` and other binaries available in
	// the PATH.
	Script string
}

A BuildPostCommitSpec holds a build post commit hook specification. The hook executes a command in a temporary container running the build output image, immediately after the last layer of the image is committed and before the image is pushed to a registry. The command is executed with the current working directory ($PWD) set to the image's WORKDIR.

The build will be marked as failed if the hook execution fails. It will fail if the script or command return a non-zero exit code, or if there is any other error related to starting the temporary container.

There are five different ways to configure the hook. As an example, all forms below are equivalent and will execute `rake test --verbose`.

1. Shell script: 

BuildPostCommitSpec{
	Script: "rake test --verbose",
}

The above is a convenient form which is equivalent to: 

BuildPostCommitSpec{
	Command: []string{"/bin/sh", "-ic"},
	Args: []string{"rake test --verbose"},
}

2. Command as the image entrypoint: 

BuildPostCommitSpec{
	Command: []string{"rake", "test", "--verbose"},
}

Command overrides the image entrypoint in the exec form, as documented in Docker: https://docs.docker.com/engine/reference/builder/#entrypoint.

3. Pass arguments to the default entrypoint: 

BuildPostCommitSpec{
	Args: []string{"rake", "test", "--verbose"},
}

This form is only useful if the image entrypoint can handle arguments.

4. Shell script with arguments: 

BuildPostCommitSpec{
	Script: "rake test $1",
	Args: []string{"--verbose"},
}

This form is useful if you need to pass arguments that would otherwise be hard to quote properly in the shell script. In the script, $0 will be "/bin/sh" and $1, $2, etc, are the positional arguments from Args.

5. Command with arguments: 

BuildPostCommitSpec{
	Command: []string{"rake", "test"},
	Args: []string{"--verbose"},
}

This form is equivalent to appending the arguments to the Command slice.

It is invalid to provide both Script and Command simultaneously. If none of the fields are specified, the hook is not executed.

type BuildPtrSliceByCreationTimestamp 

type BuildPtrSliceByCreationTimestamp []*Build

BuildPtrSliceByCreationTimestamp implements sort.Interface for []*Build based on the CreationTimestamp field.

func (BuildPtrSliceByCreationTimestamp) Len 

func (b BuildPtrSliceByCreationTimestamp) Len() int

func (BuildPtrSliceByCreationTimestamp) Less 

func (b BuildPtrSliceByCreationTimestamp) Less(i, j int) bool

func (BuildPtrSliceByCreationTimestamp) Swap 

func (b BuildPtrSliceByCreationTimestamp) Swap(i, j int)

type BuildRequest 

type BuildRequest struct {
	metav1.TypeMeta
	// TODO: build request should allow name generation via Name and GenerateName, build config
	// name should be provided as a separate field
	metav1.ObjectMeta

	// Revision is the information from the source for a specific repo snapshot.
	Revision *SourceRevision

	// TriggeredByImage is the Image that triggered this build.
	TriggeredByImage *kapi.ObjectReference

	// From is the reference to the ImageStreamTag that triggered the build.
	From *kapi.ObjectReference

	// Binary indicates a request to build from a binary provided to the builder
	Binary *BinaryBuildSource

	// LastVersion (optional) is the LastVersion of the BuildConfig that was used
	// to generate the build. If the BuildConfig in the generator doesn't match,
	// a build will not be generated.
	LastVersion *int64

	// Env contains additional environment variables you want to pass into a builder container.
	Env []kapi.EnvVar

	// TriggeredBy describes which triggers started the most recent update to the
	// buildconfig and contains information about those triggers.
	TriggeredBy []BuildTriggerCause

	// DockerStrategyOptions contains additional docker-strategy specific options for the build
	DockerStrategyOptions *DockerStrategyOptions

	// SourceStrategyOptions contains additional source-strategy specific options for the build
	SourceStrategyOptions *SourceStrategyOptions
}

BuildRequest is the resource used to pass parameters to build generator

type BuildRunPolicy 

type BuildRunPolicy string

BuildRunPolicy defines the behaviour of how the new builds are executed from the existing build configuration. 

const (
	// BuildRunPolicyParallel schedules new builds immediately after they are
	// created. Builds will be executed in parallel.
	BuildRunPolicyParallel BuildRunPolicy = "Parallel"

	// BuildRunPolicySerial schedules new builds to execute in a sequence as
	// they are created. Every build gets queued up and will execute when the
	// previous build completes. This is the default policy.
	BuildRunPolicySerial BuildRunPolicy = "Serial"

	// BuildRunPolicySerialLatestOnly schedules only the latest build to execute,
	// cancelling all the previously queued build.
	BuildRunPolicySerialLatestOnly BuildRunPolicy = "SerialLatestOnly"
)

type BuildSliceByCreationTimestamp 

type BuildSliceByCreationTimestamp []Build

BuildSliceByCreationTimestamp implements sort.Interface for []Build based on the CreationTimestamp field.

func (BuildSliceByCreationTimestamp) Len 

func (b BuildSliceByCreationTimestamp) Len() int

func (BuildSliceByCreationTimestamp) Less 

func (b BuildSliceByCreationTimestamp) Less(i, j int) bool

func (BuildSliceByCreationTimestamp) Swap 

func (b BuildSliceByCreationTimestamp) Swap(i, j int)

type BuildSource 

type BuildSource struct {
	// Binary builds accept a binary as their input. The binary is generally assumed to be a tar,
	// gzipped tar, or zip file depending on the strategy. For Docker builds, this is the build
	// context and an optional Dockerfile may be specified to override any Dockerfile in the
	// build context. For Source builds, this is assumed to be an archive as described above. For
	// Source and Docker builds, if binary.asFile is set the build will receive a directory with
	// a single file. contextDir may be used when an archive is provided. Custom builds will
	// receive this binary as input on STDIN.
	Binary *BinaryBuildSource

	// Dockerfile is the raw contents of a Dockerfile which should be built. When this option is
	// specified, the FROM may be modified based on your strategy base image and additional ENV
	// stanzas from your strategy environment will be added after the FROM, but before the rest
	// of your Dockerfile stanzas. The Dockerfile source type may be used with other options like
	// git - in those cases the Git repo will have any innate Dockerfile replaced in the context
	// dir.
	Dockerfile *string

	// Git contains optional information about git build source
	Git *GitBuildSource

	// Images describes a set of images to be used to provide source for the build
	Images []ImageSource

	// ContextDir specifies the sub-directory where the source code for the application exists.
	// This allows to have buildable sources in directory other than root of
	// repository.
	ContextDir string

	// SourceSecret is the name of a Secret that would be used for setting
	// up the authentication for cloning private repository.
	// The secret contains valid credentials for remote repository, where the
	// data's key represent the authentication method to be used and value is
	// the base64 encoded credentials. Supported auth methods are: ssh-privatekey.
	// TODO: This needs to move under the GitBuildSource struct since it's only
	// used for git authentication
	SourceSecret *kapi.LocalObjectReference

	// Secrets represents a list of secrets and their destinations that will
	// be used only for the build.
	Secrets []SecretBuildSource
}

BuildSource is the input used for the build.

type BuildSpec 

type BuildSpec struct {
	CommonSpec

	// TriggeredBy describes which triggers started the most recent update to the
	// build configuration and contains information about those triggers.
	TriggeredBy []BuildTriggerCause
}

BuildSpec encapsulates all the inputs necessary to represent a build.

type BuildStatus 

type BuildStatus struct {
	// Phase is the point in the build lifecycle. Possible values are
	// "New", "Pending", "Running", "Complete", "Failed", "Error", and "Cancelled".
	Phase BuildPhase

	// Cancelled describes if a cancel event was triggered for the build.
	Cancelled bool

	// Reason is a brief CamelCase string that describes any failure and is meant for machine parsing and tidy display in the CLI.
	Reason StatusReason

	// Message is a human-readable message indicating details about why the build has this status.
	Message string

	// StartTimestamp is a timestamp representing the server time when this Build started
	// running in a Pod.
	// It is represented in RFC3339 form and is in UTC.
	StartTimestamp *metav1.Time

	// CompletionTimestamp is a timestamp representing the server time when this Build was
	// finished, whether that build failed or succeeded.  It reflects the time at which
	// the Pod running the Build terminated.
	// It is represented in RFC3339 form and is in UTC.
	CompletionTimestamp *metav1.Time

	// Duration contains time.Duration object describing build time.
	Duration time.Duration

	// OutputDockerImageReference contains a reference to the Docker image that
	// will be built by this build. It's value is computed from
	// Build.Spec.Output.To, and should include the registry address, so that
	// it can be used to push and pull the image.
	OutputDockerImageReference string

	// Config is an ObjectReference to the BuildConfig this Build is based on.
	Config *kapi.ObjectReference

	// Output describes the Docker image the build has produced.
	Output BuildStatusOutput

	// Stages contains details about each stage that occurs during the build
	// including start time, duration (in milliseconds), and the steps that
	// occured within each stage.
	Stages []StageInfo

	// LogSnippet is the last few lines of the build log.  This value is only set for builds that failed.
	LogSnippet string
}

BuildStatus contains the status of a build

type BuildStatusOutput 

type BuildStatusOutput struct {
	// To describes the status of the built image being pushed to a registry.
	To *BuildStatusOutputTo
}

BuildStatusOutput contains the status of the built image.

type BuildStatusOutputTo 

type BuildStatusOutputTo struct {
	// ImageDigest is the digest of the built Docker image. The digest uniquely
	// identifies the image in the registry to which it was pushed.
	//
	// Please note that this field may not always be set even if the push
	// completes successfully - e.g. when the registry returns no digest or
	// returns it in a format that the builder doesn't understand.
	ImageDigest string
}

BuildStatusOutputTo describes the status of the built image with regards to image registry to which it was supposed to be pushed.

type BuildStrategy 

type BuildStrategy struct {
	// DockerStrategy holds the parameters to the Docker build strategy.
	DockerStrategy *DockerBuildStrategy

	// SourceStrategy holds the parameters to the Source build strategy.
	SourceStrategy *SourceBuildStrategy

	// CustomStrategy holds the parameters to the Custom build strategy
	CustomStrategy *CustomBuildStrategy

	// JenkinsPipelineStrategy holds the parameters to the Jenkins Pipeline build strategy.
	JenkinsPipelineStrategy *JenkinsPipelineBuildStrategy
}

BuildStrategy contains the details of how to perform a build.

type BuildStrategyType 

type BuildStrategyType string

BuildStrategyType describes a particular way of performing a build.

type BuildTriggerCause 

type BuildTriggerCause struct {
	// Message is used to store a human readable message for why the build was
	// triggered. E.g.: "Manually triggered by user", "Configuration change",etc.
	Message string

	// genericWebHook represents data for a generic webhook that fired a
	// specific build.
	GenericWebHook *GenericWebHookCause

	// GitHubWebHook represents data for a GitHub webhook that fired a specific
	// build.
	GitHubWebHook *GitHubWebHookCause

	// ImageChangeBuild stores information about an imagechange event that
	// triggered a new build.
	ImageChangeBuild *ImageChangeCause

	// GitLabWebHook represents data for a GitLab webhook that fired a specific
	// build.
	GitLabWebHook *GitLabWebHookCause

	// BitbucketWebHook represents data for a Bitbucket webhook that fired a
	// specific build.
	BitbucketWebHook *BitbucketWebHookCause
}

BuildTriggerCause holds information about a triggered build. It is used for displaying build trigger data for each build and build configuration in oc describe. It is also used to describe which triggers led to the most recent update in the build configuration.

type BuildTriggerPolicy 

type BuildTriggerPolicy struct {
	// Type is the type of build trigger
	Type BuildTriggerType

	// GitHubWebHook contains the parameters for a GitHub webhook type of trigger
	GitHubWebHook *WebHookTrigger

	// GenericWebHook contains the parameters for a Generic webhook type of trigger
	GenericWebHook *WebHookTrigger

	// ImageChange contains parameters for an ImageChange type of trigger
	ImageChange *ImageChangeTrigger

	// GitLabWebHook contains the parameters for a GitLab webhook type of trigger
	GitLabWebHook *WebHookTrigger

	// BitbucketWebHook contains the parameters for a Bitbucket webhook type of
	// trigger
	BitbucketWebHook *WebHookTrigger
}

BuildTriggerPolicy describes a policy for a single trigger that results in a new Build.

func FindTriggerPolicy 

func FindTriggerPolicy(triggerType BuildTriggerType, config *BuildConfig) (buildTriggers []BuildTriggerPolicy)

FindTriggerPolicy retrieves the BuildTrigger(s) of a given type from a build configuration. Returns nil if no matches are found.

type BuildTriggerType 

type BuildTriggerType string

BuildTriggerType refers to a specific BuildTriggerPolicy implementation. 

const (
	// GitHubWebHookBuildTriggerType represents a trigger that launches builds on
	// GitHub webhook invocations
	GitHubWebHookBuildTriggerType           BuildTriggerType = "GitHub"
	GitHubWebHookBuildTriggerTypeDeprecated BuildTriggerType = "github"

	// GenericWebHookBuildTriggerType represents a trigger that launches builds on
	// generic webhook invocations
	GenericWebHookBuildTriggerType           BuildTriggerType = "Generic"
	GenericWebHookBuildTriggerTypeDeprecated BuildTriggerType = "generic"

	// GitLabWebHookBuildTriggerType represents a trigger that launches builds on
	// GitLab webhook invocations
	GitLabWebHookBuildTriggerType BuildTriggerType = "GitLab"

	// BitbucketWebHookBuildTriggerType represents a trigger that launches builds on
	// Bitbucket webhook invocations
	BitbucketWebHookBuildTriggerType BuildTriggerType = "Bitbucket"

	// ImageChangeBuildTriggerType represents a trigger that launches builds on
	// availability of a new version of an image
	ImageChangeBuildTriggerType           BuildTriggerType = "ImageChange"
	ImageChangeBuildTriggerTypeDeprecated BuildTriggerType = "imageChange"

	// ConfigChangeBuildTriggerType will trigger a build on an initial build config creation
	// WARNING: In the future the behavior will change to trigger a build on any config change
	ConfigChangeBuildTriggerType BuildTriggerType = "ConfigChange"
)

type CommonSpec 

type CommonSpec struct {

	// ServiceAccount is the name of the ServiceAccount to use to run the pod
	// created by this build.
	// The pod will be allowed to use secrets referenced by the ServiceAccount.
	ServiceAccount string

	// Source describes the SCM in use.
	Source BuildSource

	// Revision is the information from the source for a specific repo
	// snapshot.
	// This is optional.
	Revision *SourceRevision

	// Strategy defines how to perform a build.
	Strategy BuildStrategy

	// Output describes the Docker image the Strategy should produce.
	Output BuildOutput

	// Resources computes resource requirements to execute the build.
	Resources kapi.ResourceRequirements

	// PostCommit is a build hook executed after the build output image is
	// committed, before it is pushed to a registry.
	PostCommit BuildPostCommitSpec

	// CompletionDeadlineSeconds is an optional duration in seconds, counted from
	// the time when a build pod gets scheduled in the system, that the build may
	// be active on a node before the system actively tries to terminate the
	// build; value must be positive integer.
	CompletionDeadlineSeconds *int64

	// NodeSelector is a selector which must be true for the build pod to fit on a node
	// If nil, it can be overridden by default build nodeselector values for the cluster.
	// If set to an empty map or a map with any values, default build nodeselector values
	// are ignored.
	NodeSelector map[string]string
}

CommonSpec encapsulates all common fields between Build and BuildConfig.

type CommonWebHookCause 

type CommonWebHookCause struct {
	// Revision is the git source revision information of the trigger.
	Revision *SourceRevision

	// Secret is the obfuscated webhook secret that triggered a build.
	Secret string
}

CommonWebHookCause factors out the identical format of these webhook causes into struct so we can share it in the specific causes; it is too late for GitHub and Generic but we can leverage this pattern with GitLab and Bitbucket.

type CustomBuildStrategy 

type CustomBuildStrategy struct {
	// From is reference to an DockerImage, ImageStream, ImageStreamTag, or ImageStreamImage from which
	// the docker image should be pulled
	From kapi.ObjectReference

	// PullSecret is the name of a Secret that would be used for setting up
	// the authentication for pulling the Docker images from the private Docker
	// registries
	PullSecret *kapi.LocalObjectReference

	// Env contains additional environment variables you want to pass into a builder container.
	Env []kapi.EnvVar

	// ExposeDockerSocket will allow running Docker commands (and build Docker images) from
	// inside the Docker container.
	// TODO: Allow admins to enforce 'false' for this option
	ExposeDockerSocket bool

	// ForcePull describes if the controller should configure the build pod to always pull the images
	// for the builder or only pull if it is not present locally
	ForcePull bool

	// Secrets is a list of additional secrets that will be included in the custom build pod
	Secrets []SecretSpec

	// BuildAPIVersion is the requested API version for the Build object serialized and passed to the custom builder
	BuildAPIVersion string
}

CustomBuildStrategy defines input parameters specific to Custom build.

type DockerBuildStrategy 

type DockerBuildStrategy struct {
	// From is reference to an DockerImage, ImageStream, ImageStreamTag, or ImageStreamImage from which
	// the docker image should be pulled
	// the resulting image will be used in the FROM line of the Dockerfile for this build.
	From *kapi.ObjectReference

	// PullSecret is the name of a Secret that would be used for setting up
	// the authentication for pulling the Docker images from the private Docker
	// registries
	PullSecret *kapi.LocalObjectReference

	// NoCache if set to true indicates that the docker build must be executed with the
	// --no-cache=true flag
	NoCache bool

	// Env contains additional environment variables you want to pass into a builder container.
	Env []kapi.EnvVar

	// Args contains any build arguments that are to be passed to Docker.  See
	// https://docs.docker.com/engine/reference/builder/#/arg for more details
	BuildArgs []kapi.EnvVar

	// ForcePull describes if the builder should pull the images from registry prior to building.
	ForcePull bool

	// DockerfilePath is the path of the Dockerfile that will be used to build the Docker image,
	// relative to the root of the context (contextDir).
	DockerfilePath string

	// ImageOptimizationPolicy describes what optimizations the system can use when building images
	// to reduce the final size or time spent building the image. The default policy is 'None' which
	// means the final build image will be equivalent to an image created by the Docker build API.
	// The experimental policy 'SkipLayerCache' will avoid commiting new layers in between each
	// image step, and will fail if the Dockerfile cannot provide compatibility with the 'None'
	// policy. An additional experimental policy 'SkipLayerCacheAndWarn' is the same as
	// 'SkipLayerCache' but simply warns if compatibility cannot be preserved.
	ImageOptimizationPolicy *ImageOptimizationPolicy
}

DockerBuildStrategy defines input parameters specific to Docker build.

type DockerStrategyOptions 

type DockerStrategyOptions struct {
	// Args contains any build arguments that are to be passed to Docker.  See
	// https://docs.docker.com/engine/reference/builder/#/arg for more details
	BuildArgs []kapi.EnvVar

	// NoCache overrides the docker-strategy noCache option in the build config
	NoCache *bool
}

DockerStrategyOptions contains extra strategy options for Docker builds

type GenericWebHookCause 

type GenericWebHookCause struct {
	// Revision is an optional field that stores the git source revision
	// information of the generic webhook trigger when it is available.
	Revision *SourceRevision

	// Secret is the obfuscated webhook secret that triggered a build.
	Secret string
}

GenericWebHookCause holds information about a generic WebHook that triggered a build.

type GenericWebHookEvent 

type GenericWebHookEvent struct {
	// Git is the git information, if any.
	Git *GitInfo

	// Env contains additional environment variables you want to pass into a builder container.
	// ValueFrom is not supported.
	Env []kapi.EnvVar

	// DockerStrategyOptions contains additional docker-strategy specific options for the build
	DockerStrategyOptions *DockerStrategyOptions
}

GenericWebHookEvent is the payload expected for a generic webhook post

type GitBuildSource 

type GitBuildSource struct {
	// URI points to the source that will be built. The structure of the source
	// will depend on the type of build to run
	URI string

	// Ref is the branch/tag/ref to build.
	Ref string

	// ProxyConfig defines the proxies to use for the git clone operation
	ProxyConfig
}

GitBuildSource defines the parameters of a Git SCM

type GitHubWebHookCause 

type GitHubWebHookCause struct {
	// Revision is the git source revision information of the trigger.
	Revision *SourceRevision

	// Secret is the obfuscated webhook secret that triggered a build.
	Secret string
}

GitHubWebHookCause has information about a GitHub webhook that triggered a build.

type GitInfo 

type GitInfo struct {
	GitBuildSource
	GitSourceRevision

	// Refs is a list of GitRefs for the provided repo - generally sent
	// when used from a post-receive hook. This field is optional and is
	// used when sending multiple refs
	// +k8s:conversion-gen=false
	Refs []GitRefInfo
}

GitInfo is the aggregated git information for a generic webhook post

type GitLabWebHookCause 

type GitLabWebHookCause struct {
	CommonWebHookCause
}

GitLabWebHookCause has information about a GitLab webhook that triggered a build.

type GitRefInfo 

type GitRefInfo struct {
	GitBuildSource
	GitSourceRevision
}

GitRefInfo is a single ref

type GitSourceRevision 

type GitSourceRevision struct {
	// Commit is the commit hash identifying a specific commit
	Commit string

	// Author is the author of a specific commit
	Author SourceControlUser

	// Committer is the committer of a specific commit
	Committer SourceControlUser

	// Message is the description of a specific commit
	Message string
}

GitSourceRevision is the commit information from a git source for a build

type ImageChangeCause 

type ImageChangeCause struct {
	// ImageID is the ID of the image that triggered a a new build.
	ImageID string

	// FromRef contains detailed information about an image that triggered a
	// build
	FromRef *kapi.ObjectReference
}

ImageChangeCause contains information about the image that triggered a build.

type ImageChangeTrigger 

type ImageChangeTrigger struct {
	// LastTriggeredImageID is used internally by the ImageChangeController to save last
	// used image ID for build
	LastTriggeredImageID string

	// From is a reference to an ImageStreamTag that will trigger a build when updated
	// It is optional. If no From is specified, the From image from the build strategy
	// will be used. Only one ImageChangeTrigger with an empty From reference is allowed in
	// a build configuration.
	From *kapi.ObjectReference
}

ImageChangeTrigger allows builds to be triggered when an ImageStream changes

type ImageLabel 

type ImageLabel struct {
	// Name defines the name of the label. It must have non-zero length.
	Name string

	// Value defines the literal value of the label.
	Value string
}

ImageLabel represents a label applied to the resulting image.

type ImageOptimizationPolicy 

type ImageOptimizationPolicy string

ImageOptimizationPolicy describes what optimizations the builder can perform when building images. 

const (
	// ImageOptimizationNone will generate a canonical Docker image as produced by the
	// `docker build` command.
	ImageOptimizationNone ImageOptimizationPolicy = "None"

	// ImageOptimizationSkipLayers is an experimental policy and will avoid creating
	// unique layers for each dockerfile line, resulting in smaller images and saving time
	// during creation. Some Dockerfile syntax is not fully supported - content added to
	// a VOLUME by an earlier layer may have incorrect uid, gid, and filesystem permissions.
	// If an unsupported setting is detected, the build will fail.
	ImageOptimizationSkipLayers ImageOptimizationPolicy = "SkipLayers"

	// ImageOptimizationSkipLayersAndWarn is the same as SkipLayers, but will only
	// warn to the build output instead of failing when unsupported syntax is detected. This
	// policy is experimental.
	ImageOptimizationSkipLayersAndWarn ImageOptimizationPolicy = "SkipLayersAndWarn"
)

type ImageSource 

type ImageSource struct {
	// From is a reference to an ImageStreamTag, ImageStreamImage, or DockerImage to
	// copy source from.
	From kapi.ObjectReference

	// Paths is a list of source and destination paths to copy from the image.
	Paths []ImageSourcePath

	// PullSecret is a reference to a secret to be used to pull the image from a registry
	// If the image is pulled from the OpenShift registry, this field does not need to be set.
	PullSecret *kapi.LocalObjectReference
}

ImageSource describes an image that is used as source for the build

type ImageSourcePath 

type ImageSourcePath struct {
	// SourcePath is the absolute path of the file or directory inside the image to
	// copy to the build directory.  If the source path ends in /. then the content of
	// the directory will be copied, but the directory itself will not be created at the
	// destination.
	SourcePath string

	// DestinationDir is the relative directory within the build directory
	// where files copied from the image are placed.
	DestinationDir string
}

ImageSourcePath describes a path to be copied from a source image and its destination within the build directory.

type JenkinsPipelineBuildStrategy 

type JenkinsPipelineBuildStrategy struct {
	// JenkinsfilePath is the optional path of the Jenkinsfile that will be used to configure the pipeline
	// relative to the root of the context (contextDir). If both JenkinsfilePath & Jenkinsfile are
	// both not specified, this defaults to Jenkinsfile in the root of the specified contextDir.
	JenkinsfilePath string

	// Jenkinsfile defines the optional raw contents of a Jenkinsfile which defines a Jenkins pipeline build.
	Jenkinsfile string

	// Env contains additional environment variables you want to pass into a build pipeline.
	Env []kapi.EnvVar
}

JenkinsPipelineStrategy holds parameters specific to a Jenkins Pipeline build.

type PredicateFunc 

type PredicateFunc func(interface{}) bool

PredicateFunc is testing an argument and decides does it meet some criteria or not. It can be used for filtering elements based on some conditions.

func ByBuildConfigPredicate 

func ByBuildConfigPredicate(labelValue string) PredicateFunc

ByBuildConfigPredicate matches all builds that have build config annotation or label with specified value.

type ProxyConfig 

type ProxyConfig struct {
	// HTTPProxy is a proxy used to reach the git repository over http
	HTTPProxy *string

	// HTTPSProxy is a proxy used to reach the git repository over https
	HTTPSProxy *string

	// NoProxy is the list of domains for which the proxy should not be used
	NoProxy *string
}

ProxyConfig defines what proxies to use for an operation

type SecretBuildSource 

type SecretBuildSource struct {
	// Secret is a reference to an existing secret that you want to use in your
	// build.
	Secret kapi.LocalObjectReference

	// DestinationDir is the directory where the files from the secret should be
	// available for the build time.
	// For the Source build strategy, these will be injected into a container
	// where the assemble script runs. Later, when the script finishes, all files
	// injected will be truncated to zero length.
	// For the Docker build strategy, these will be copied into the build
	// directory, where the Dockerfile is located, so users can ADD or COPY them
	// during docker build.
	DestinationDir string
}

SecretBuildSource describes a secret and its destination directory that will be used only at the build time. The content of the secret referenced here will be copied into the destination directory instead of mounting.

type SecretSpec 

type SecretSpec struct {
	// SecretSource is a reference to the secret
	SecretSource kapi.LocalObjectReference

	// MountPath is the path at which to mount the secret
	MountPath string
}

SecretSpec specifies a secret to be included in a build pod and its corresponding mount point

type SourceBuildStrategy 

type SourceBuildStrategy struct {
	// From is reference to an DockerImage, ImageStream, ImageStreamTag, or ImageStreamImage from which
	// the docker image should be pulled
	From kapi.ObjectReference

	// PullSecret is the name of a Secret that would be used for setting up
	// the authentication for pulling the Docker images from the private Docker
	// registries
	PullSecret *kapi.LocalObjectReference

	// Env contains additional environment variables you want to pass into a builder container.
	Env []kapi.EnvVar

	// Scripts is the location of Source scripts
	Scripts string

	// Incremental flag forces the Source build to do incremental builds if true.
	Incremental *bool

	// ForcePull describes if the builder should pull the images from registry prior to building.
	ForcePull bool
}

SourceBuildStrategy defines input parameters specific to an Source build.

type SourceControlUser 

type SourceControlUser struct {
	// Name of the source control user
	Name string

	// Email of the source control user
	Email string
}

SourceControlUser defines the identity of a user of source control

type SourceRevision 

type SourceRevision struct {
	// Git contains information about git-based build source
	Git *GitSourceRevision
}

SourceRevision is the revision or commit information from the source for the build

type SourceStrategyOptions 

type SourceStrategyOptions struct {
	// Incremental overrides the source-strategy incremental option in the build config
	Incremental *bool
}

SourceStrategyOptions contains extra strategy options for Source builds

type StageInfo 

type StageInfo struct {
	// Name is a unique identifier for each build stage that occurs.
	Name StageName

	// StartTime is a timestamp representing the server time when this Stage started.
	// It is represented in RFC3339 form and is in UTC.
	StartTime metav1.Time

	// DurationMilliseconds identifies how long the stage took
	// to complete in milliseconds.
	// Note: the duration of a stage can exceed the sum of the duration of the steps within
	// the stage as not all actions are accounted for in explicit build steps.
	DurationMilliseconds int64

	// Steps contains details about each step that occurs during a build stage
	// including start time and duration in milliseconds.
	Steps []StepInfo
}

StageInfo contains details about a build stage.

func AppendStageAndStepInfo 

func AppendStageAndStepInfo(stages []StageInfo, stagesToMerge []StageInfo) []StageInfo

AppendStageAndStepInfo appends the step info from one stages slice into another.

func RecordStageAndStepInfo 

func RecordStageAndStepInfo(stages []StageInfo, stageName StageName, stepName StepName, startTime metav1.Time, endTime metav1.Time) []StageInfo

RecordStageAndStepInfo records details about each build stage and step

type StageName 

type StageName string

StageName is the identifier for each build stage. 

const (
	// StageFetchInputs fetches any inputs such as source code.
	StageFetchInputs StageName = "FetchInputs"

	// StagePullImages pulls any images that are needed such as
	// base images or input images.
	StagePullImages StageName = "PullImages"

	// StageBuild performs the steps necessary to build the image.
	StageBuild StageName = "Build"

	// StagePostCommit executes any post commit steps.
	StagePostCommit StageName = "PostCommit"

	// StagePushImage pushes the image to the node.
	StagePushImage StageName = "PushImage"
)

Valid values for StageName

type StatusReason 

type StatusReason string

StatusReason is a brief CamelCase string that describes a temporary or permanent build error condition, meant for machine parsing and tidy display in the CLI. 

const (
	// StatusReasonError is a generic reason for a build error condition.
	StatusReasonError StatusReason = "Error"

	// StatusReasonCannotCreateBuildPodSpec is an error condition when the build
	// strategy cannot create a build pod spec.
	StatusReasonCannotCreateBuildPodSpec StatusReason = "CannotCreateBuildPodSpec"

	// StatusReasonCannotCreateBuildPod is an error condition when a build pod
	// cannot be created.
	StatusReasonCannotCreateBuildPod StatusReason = "CannotCreateBuildPod"

	// StatusReasonInvalidOutputReference is an error condition when the build
	// output is an invalid reference.
	StatusReasonInvalidOutputReference StatusReason = "InvalidOutputReference"

	// StatusReasonInvalidImageReference is an error condition when the build
	// references an invalid image.
	StatusReasonInvalidImageReference StatusReason = "InvalidImageReference"

	// StatusReasonCancelBuildFailed is an error condition when cancelling a build
	// fails.
	StatusReasonCancelBuildFailed StatusReason = "CancelBuildFailed"

	// StatusReasonBuildPodDeleted is an error condition when the build pod is
	// deleted before build completion.
	StatusReasonBuildPodDeleted StatusReason = "BuildPodDeleted"

	// StatusReasonExceededRetryTimeout is an error condition when the build has
	// not completed and retrying the build times out.
	StatusReasonExceededRetryTimeout StatusReason = "ExceededRetryTimeout"

	// StatusReasonMissingPushSecret indicates that the build is missing required
	// secret for pushing the output image.
	// The build will stay in the pending state until the secret is created, or the build times out.
	StatusReasonMissingPushSecret StatusReason = "MissingPushSecret"

	// StatusReasonPostCommitHookFailed indicates the post-commit hook failed.
	StatusReasonPostCommitHookFailed StatusReason = "PostCommitHookFailed"

	// StatusReasonPushImageToRegistryFailed indicates that an image failed to be
	// pushed to the registry.
	StatusReasonPushImageToRegistryFailed StatusReason = "PushImageToRegistryFailed"

	// StatusReasonPullBuilderImageFailed indicates that we failed to pull the
	// builder image.
	StatusReasonPullBuilderImageFailed StatusReason = "PullBuilderImageFailed"

	// StatusReasonFetchSourceFailed indicates that fetching the source of the
	// build has failed.
	StatusReasonFetchSourceFailed StatusReason = "FetchSourceFailed"

	// StatusReasonInvalidContextDirectory indicates that the supplied
	// contextDir does not exist
	StatusReasonInvalidContextDirectory StatusReason = "InvalidContextDirectory"

	// StatusReasonCancelledBuild indicates that the build was cancelled by the
	// user.
	StatusReasonCancelledBuild StatusReason = "CancelledBuild"

	// StatusReasonDockerBuildFailed indicates that the docker build strategy has
	// failed.
	StatusReasonDockerBuildFailed StatusReason = "DockerBuildFailed"

	// StatusReasonBuildPodExists indicates that the build tried to create a
	// build pod but one was already present.
	StatusReasonBuildPodExists StatusReason = "BuildPodExists"

	// StatusReasonNoBuildContainerStatus indicates that the build failed because the
	// the build pod has no container statuses.
	StatusReasonNoBuildContainerStatus StatusReason = "NoBuildContainerStatus"

	// StatusReasonFailedContainer indicates that the pod for the build has at least
	// one container with a non-zero exit status.
	StatusReasonFailedContainer StatusReason = "FailedContainer"

	// StatusReasonUnresolvableEnvironmentVariable indicates that an error occurred processing
	// the supplied options for environment variables in the build strategy environment
	StatusReasonUnresolvableEnvironmentVariable StatusReason = "UnresolvableEnvironmentVariable"

	// StatusReasonGenericBuildFailed is the reason associated with a broad
	// range of build failures.
	StatusReasonGenericBuildFailed StatusReason = "GenericBuildFailed"

	// StatusCannotRetrieveServiceAccount is the reason associated with a failure
	// to look up the service account associated with the BuildConfig.
	StatusReasonCannotRetrieveServiceAccount StatusReason = "CannotRetrieveServiceAccount"
)

These are the valid reasons of build statuses.

type StepInfo 

type StepInfo struct {
	// Name is a unique identifier for each build step.
	Name StepName

	// StartTime is a timestamp representing the server time when this Step started.
	// it is represented in RFC3339 form and is in UTC.
	StartTime metav1.Time

	// DurationMilliseconds identifies how long the step took
	// to complete in milliseconds.
	DurationMilliseconds int64
}

StepInfo contains details about a build step.

type StepName 

type StepName string

StepName is a unique identifier for each build step. 

const (
	// StepExecPostCommitHook executes the buildconfigs post commit hook.
	StepExecPostCommitHook StepName = "RunPostCommitHook"

	// StepFetchGitSource fetches the source code for the build.
	StepFetchGitSource StepName = "FetchGitSource"

	// StepPullBaseImage pulls the base image for the build.
	StepPullBaseImage StepName = "PullBaseImage"

	// StepPullInputImage pulls the input image for the build.
	StepPullInputImage StepName = "PullInputImage"

	// StepPushImage pushed the image to the registry.
	StepPushImage StepName = "PushImage"

	// StepPushDockerImage pushes the docker image to the registry.
	StepPushDockerImage StepName = "PushDockerImage"

	//StepDockerBuild performs the docker build
	StepDockerBuild StepName = "DockerBuild"
)

Valid values for StepName

type WebHookTrigger 

type WebHookTrigger struct {
	// Secret used to validate requests.
	Secret string

	// AllowEnv determines whether the webhook can set environment variables; can only
	// be set to true for GenericWebHook
	AllowEnv bool
}

WebHookTrigger is a trigger that gets invoked using a webhook type of post

Source Files

View all Source files

Directories

Path Synopsis
+groupName=build.openshift.io Package v1 is the v1 version of the API.
 +groupName=build.openshift.io Package v1 is the v1 version of the API.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.