camera

package
v0.0.0-...-2c72341 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 19, 2019 License: MIT Imports: 8 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	/**
	 * The capture session has dropped this frame due to an
	 * {@link ACameraCaptureSession_abortCaptures} call.
	 */
	CAPTURE_FAILURE_REASON_FLUSHED = C.CAPTURE_FAILURE_REASON_FLUSHED

	/**
	 * The capture session has dropped this frame due to an error in the framework.
	 */
	CAPTURE_FAILURE_REASON_ERROR = C.CAPTURE_FAILURE_REASON_ERROR
)

/ Enum for describing error reason in {@link ACameraCaptureFailure}

View Source 
const (
	/**
	 * The camera device is in use already.
	 */
	ERROR_CAMERA_IN_USE = C.ERROR_CAMERA_IN_USE

	/**
	 * The system-wide limit for number of open cameras or camera resources has
	 * been reached, and more camera devices cannot be opened until previous
	 * instances are closed.
	 */
	ERROR_MAX_CAMERAS_IN_USE = C.ERROR_MAX_CAMERAS_IN_USE

	/**
	 * The camera is disabled due to a device policy, and cannot be opened.
	 */
	ERROR_CAMERA_DISABLED = C.ERROR_CAMERA_DISABLED

	/**
	 * The camera device has encountered a fatal error.
	 * <p>The camera device needs to be re-opened to be used again.</p>
	 */
	ERROR_CAMERA_DEVICE = C.ERROR_CAMERA_DEVICE

	/**
	 * The camera service has encountered a fatal error.
	 * <p>The Android device may need to be shut down and restarted to restore
	 * camera function, or there may be a persistent hardware problem.
	 * An attempt at recovery may be possible by closing the
	 * CameraDevice and the CameraManager, and trying to acquire all resources
	 * again from scratch.</p>
	 */
	ERROR_CAMERA_SERVICE = C.ERROR_CAMERA_SERVICE
)

/ Enum for ACameraDevice_ErrorStateCallback error code

View Source 
const (
	STATUS_ERROR_BASE iStatus = C.ACAMERA_ERROR_BASE

	/**
	 * Camera operation has failed due to an unspecified cause.
	 */
	STATUS_ERROR_UNKNOWN iStatus = C.ACAMERA_ERROR_UNKNOWN

	/**
	 * Camera operation has failed due to an invalid parameter being passed to the method.
	 */
	STATUS_ERROR_INVALID_PARAMETER iStatus = C.ACAMERA_ERROR_INVALID_PARAMETER

	/**
	 * Camera operation has failed because the camera device has been closed, possibly because a
	 * higher-priority client has taken ownership of the camera device.
	 */
	STATUS_ERROR_CAMERA_DISCONNECTED iStatus = C.ACAMERA_ERROR_CAMERA_DISCONNECTED

	/**
	 * Camera operation has failed due to insufficient memory.
	 */
	STATUS_ERROR_NOT_ENOUGH_MEMORY iStatus = C.ACAMERA_ERROR_NOT_ENOUGH_MEMORY

	/**
	 * Camera operation has failed due to the requested metadata tag cannot be found in input
	 * {@link ACameraMetadata} or {@link ACaptureRequest}.
	 */
	STATUS_ERROR_METADATA_NOT_FOUND iStatus = C.ACAMERA_ERROR_METADATA_NOT_FOUND

	/**
	 * Camera operation has failed and the camera device has encountered a fatal error and needs to
	 * be re-opened before it can be used again.
	 */
	STATUS_ERROR_CAMERA_DEVICE iStatus = C.ACAMERA_ERROR_CAMERA_DEVICE

	/**
	 * Camera operation has failed and the camera service has encountered a fatal error.
	 *
	 * <p>The Android device may need to be shut down and restarted to restore
	 * camera function, or there may be a persistent hardware problem.</p>
	 *
	 * <p>An attempt at recovery may be possible by closing the
	 * ACameraDevice and the ACameraManager, and trying to acquire all resources
	 * again from scratch.</p>
	 */
	STATUS_ERROR_CAMERA_SERVICE iStatus = C.ACAMERA_ERROR_CAMERA_SERVICE

	/**
	 * The {@link ACameraCaptureSession} has been closed and cannnot perform any operation other
	 * than {@link ACameraCaptureSession_close}.
	 */
	STATUS_ERROR_SESSION_CLOSED iStatus = C.ACAMERA_ERROR_SESSION_CLOSED

	/**
	 * Camera operation has failed due to an invalid internal operation. Usually this is due to a
	 * low-level problem that may resolve itself on retry
	 */
	STATUS_ERROR_INVALID_OPERATION iStatus = C.ACAMERA_ERROR_INVALID_OPERATION

	/**
	 * Camera device does not support the stream configuration provided by application in
	 * {@link ACameraDevice_createCaptureSession}.
	 */
	STATUS_ERROR_STREAM_CONFIGURE_FAIL iStatus = C.ACAMERA_ERROR_STREAM_CONFIGURE_FAIL

	/**
	 * Camera device is being used by another higher priority camera API client.
	 */
	STATUS_ERROR_CAMERA_IN_USE iStatus = C.ACAMERA_ERROR_CAMERA_IN_USE

	/**
	 * The system-wide limit for number of open cameras or camera resources has been reached, and
	 * more camera devices cannot be opened until previous instances are closed.
	 */
	STATUS_ERROR_MAX_CAMERA_IN_USE iStatus = C.ACAMERA_ERROR_MAX_CAMERA_IN_USE

	/**
	 * The camera is disabled due to a device policy, and cannot be opened.
	 */
	STATUS_ERROR_CAMERA_DISABLED iStatus = C.ACAMERA_ERROR_CAMERA_DISABLED

	/**
	 * The application does not have permission to open camera.
	 */
	STATUS_ERROR_PERMISSION_DENIED iStatus = C.ACAMERA_ERROR_PERMISSION_DENIED
)
View Source 
const (
	/**
	 * <p>Use the ACAMERA_COLOR_CORRECTION_TRANSFORM matrix
	 * and ACAMERA_COLOR_CORRECTION_GAINS to do color conversion.</p>
	 * <p>All advanced white balance adjustments (not specified
	 * by our white balance pipeline) must be disabled.</p>
	 * <p>If AWB is enabled with <code>ACAMERA_CONTROL_AWB_MODE != OFF</code>, then
	 * TRANSFORM_MATRIX is ignored. The camera device will override
	 * this value to either FAST or HIGH_QUALITY.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	COLOR_CORRECTION_MODE_TRANSFORM_MATRIX = C.ACAMERA_COLOR_CORRECTION_MODE_TRANSFORM_MATRIX

	/**
	 * <p>Color correction processing must not slow down
	 * capture rate relative to sensor raw output.</p>
	 * <p>Advanced white balance adjustments above and beyond
	 * the specified white balance pipeline may be applied.</p>
	 * <p>If AWB is enabled with <code>ACAMERA_CONTROL_AWB_MODE != OFF</code>, then
	 * the camera device uses the last frame's AWB values
	 * (or defaults if AWB has never been run).</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	COLOR_CORRECTION_MODE_FAST = C.ACAMERA_COLOR_CORRECTION_MODE_FAST

	/**
	 * <p>Color correction processing operates at improved
	 * quality but the capture rate might be reduced (relative to sensor
	 * raw output rate)</p>
	 * <p>Advanced white balance adjustments above and beyond
	 * the specified white balance pipeline may be applied.</p>
	 * <p>If AWB is enabled with <code>ACAMERA_CONTROL_AWB_MODE != OFF</code>, then
	 * the camera device uses the last frame's AWB values
	 * (or defaults if AWB has never been run).</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	COLOR_CORRECTION_MODE_HIGH_QUALITY = C.ACAMERA_COLOR_CORRECTION_MODE_HIGH_QUALITY
)
View Source 
const (
	/**
	 * <p>No aberration correction is applied.</p>
	 */
	COLOR_CORRECTION_ABERRATION_MODE_OFF = C.ACAMERA_COLOR_CORRECTION_ABERRATION_MODE_OFF

	/**
	 * <p>Aberration correction will not slow down capture rate
	 * relative to sensor raw output.</p>
	 */
	COLOR_CORRECTION_ABERRATION_MODE_FAST = C.ACAMERA_COLOR_CORRECTION_ABERRATION_MODE_FAST

	/**
	 * <p>Aberration correction operates at improved quality but the capture rate might be
	 * reduced (relative to sensor raw output rate)</p>
	 */
	COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY = C.ACAMERA_COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY
)
View Source 
const (
	/**
	 * <p>The camera device will not adjust exposure duration to
	 * avoid banding problems.</p>
	 */
	CONTROL_AE_ANTIBANDING_MODE_OFF = C.ACAMERA_CONTROL_AE_ANTIBANDING_MODE_OFF

	/**
	 * <p>The camera device will adjust exposure duration to
	 * avoid banding problems with 50Hz illumination sources.</p>
	 */
	CONTROL_AE_ANTIBANDING_MODE_50HZ = C.ACAMERA_CONTROL_AE_ANTIBANDING_MODE_50HZ

	/**
	 * <p>The camera device will adjust exposure duration to
	 * avoid banding problems with 60Hz illumination
	 * sources.</p>
	 */
	CONTROL_AE_ANTIBANDING_MODE_60HZ = C.ACAMERA_CONTROL_AE_ANTIBANDING_MODE_60HZ

	/**
	 * <p>The camera device will automatically adapt its
	 * antibanding routine to the current illumination
	 * condition. This is the default mode if AUTO is
	 * available on given camera device.</p>
	 */
	CONTROL_AE_ANTIBANDING_MODE_AUTO = C.ACAMERA_CONTROL_AE_ANTIBANDING_MODE_AUTO
)
View Source 
const (
	/**
	 * <p>Auto-exposure lock is disabled; the AE algorithm
	 * is free to update its parameters.</p>
	 */
	CONTROL_AE_LOCK_OFF = C.ACAMERA_CONTROL_AE_LOCK_OFF

	/**
	 * <p>Auto-exposure lock is enabled; the AE algorithm
	 * must not update the exposure and sensitivity parameters
	 * while the lock is active.</p>
	 * <p>ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION setting changes
	 * will still take effect while auto-exposure is locked.</p>
	 * <p>Some rare LEGACY devices may not support
	 * this, in which case the value will always be overridden to OFF.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION
	 */
	CONTROL_AE_LOCK_ON = C.ACAMERA_CONTROL_AE_LOCK_ON
)
View Source 
const (
	/**
	 * <p>The camera device's autoexposure routine is disabled.</p>
	 * <p>The application-selected ACAMERA_SENSOR_EXPOSURE_TIME,
	 * ACAMERA_SENSOR_SENSITIVITY and
	 * ACAMERA_SENSOR_FRAME_DURATION are used by the camera
	 * device, along with ACAMERA_FLASH_* fields, if there's
	 * a flash unit for this camera device.</p>
	 * <p>Note that auto-white balance (AWB) and auto-focus (AF)
	 * behavior is device dependent when AE is in OFF mode.
	 * To have consistent behavior across different devices,
	 * it is recommended to either set AWB and AF to OFF mode
	 * or lock AWB and AF before setting AE to OFF.
	 * See ACAMERA_CONTROL_AWB_MODE, ACAMERA_CONTROL_AF_MODE,
	 * ACAMERA_CONTROL_AWB_LOCK, and ACAMERA_CONTROL_AF_TRIGGER
	 * for more details.</p>
	 * <p>LEGACY devices do not support the OFF mode and will
	 * override attempts to use this value to ON.</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AF_TRIGGER
	 * @see ACAMERA_CONTROL_AWB_LOCK
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_AE_MODE_OFF = C.ACAMERA_CONTROL_AE_MODE_OFF

	/**
	 * <p>The camera device's autoexposure routine is active,
	 * with no flash control.</p>
	 * <p>The application's values for
	 * ACAMERA_SENSOR_EXPOSURE_TIME,
	 * ACAMERA_SENSOR_SENSITIVITY, and
	 * ACAMERA_SENSOR_FRAME_DURATION are ignored. The
	 * application has control over the various
	 * ACAMERA_FLASH_* fields.</p>
	 *
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_AE_MODE_ON = C.ACAMERA_CONTROL_AE_MODE_ON

	/**
	 * <p>Like ON, except that the camera device also controls
	 * the camera's flash unit, firing it in low-light
	 * conditions.</p>
	 * <p>The flash may be fired during a precapture sequence
	 * (triggered by ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER) and
	 * may be fired for captures for which the
	 * ACAMERA_CONTROL_CAPTURE_INTENT field is set to
	 * STILL_CAPTURE</p>
	 *
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_AE_MODE_ON_AUTO_FLASH = C.ACAMERA_CONTROL_AE_MODE_ON_AUTO_FLASH

	/**
	 * <p>Like ON, except that the camera device also controls
	 * the camera's flash unit, always firing it for still
	 * captures.</p>
	 * <p>The flash may be fired during a precapture sequence
	 * (triggered by ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER) and
	 * will always be fired for captures for which the
	 * ACAMERA_CONTROL_CAPTURE_INTENT field is set to
	 * STILL_CAPTURE</p>
	 *
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_AE_MODE_ON_ALWAYS_FLASH = C.ACAMERA_CONTROL_AE_MODE_ON_ALWAYS_FLASH

	/**
	 * <p>Like ON_AUTO_FLASH, but with automatic red eye
	 * reduction.</p>
	 * <p>If deemed necessary by the camera device, a red eye
	 * reduction flash will fire during the precapture
	 * sequence.</p>
	 */
	CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE = C.ACAMERA_CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE
)
View Source 
const (
	/**
	 * <p>The trigger is idle.</p>
	 */
	CONTROL_AE_PRECAPTURE_TRIGGER_IDLE = C.ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER_IDLE

	/**
	 * <p>The precapture metering sequence will be started
	 * by the camera device.</p>
	 * <p>The exact effect of the precapture trigger depends on
	 * the current AE mode and state.</p>
	 */
	CONTROL_AE_PRECAPTURE_TRIGGER_START = C.ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER_START

	/**
	 * <p>The camera device will cancel any currently active or completed
	 * precapture metering sequence, the auto-exposure routine will return to its
	 * initial state.</p>
	 */
	CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL = C.ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL
)
View Source 
const (
	/**
	 * <p>The auto-focus routine does not control the lens;
	 * ACAMERA_LENS_FOCUS_DISTANCE is controlled by the
	 * application.</p>
	 *
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 */
	CONTROL_AF_MODE_OFF = C.ACAMERA_CONTROL_AF_MODE_OFF

	/**
	 * <p>Basic automatic focus mode.</p>
	 * <p>In this mode, the lens does not move unless
	 * the autofocus trigger action is called. When that trigger
	 * is activated, AF will transition to ACTIVE_SCAN, then to
	 * the outcome of the scan (FOCUSED or NOT_FOCUSED).</p>
	 * <p>Always supported if lens is not fixed focus.</p>
	 * <p>Use ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE to determine if lens
	 * is fixed-focus.</p>
	 * <p>Triggering AF_CANCEL resets the lens position to default,
	 * and sets the AF state to INACTIVE.</p>
	 *
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	CONTROL_AF_MODE_AUTO = C.ACAMERA_CONTROL_AF_MODE_AUTO

	/**
	 * <p>Close-up focusing mode.</p>
	 * <p>In this mode, the lens does not move unless the
	 * autofocus trigger action is called. When that trigger is
	 * activated, AF will transition to ACTIVE_SCAN, then to
	 * the outcome of the scan (FOCUSED or NOT_FOCUSED). This
	 * mode is optimized for focusing on objects very close to
	 * the camera.</p>
	 * <p>When that trigger is activated, AF will transition to
	 * ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or
	 * NOT_FOCUSED). Triggering cancel AF resets the lens
	 * position to default, and sets the AF state to
	 * INACTIVE.</p>
	 */
	CONTROL_AF_MODE_MACRO = C.ACAMERA_CONTROL_AF_MODE_MACRO

	/**
	 * <p>In this mode, the AF algorithm modifies the lens
	 * position continually to attempt to provide a
	 * constantly-in-focus image stream.</p>
	 * <p>The focusing behavior should be suitable for good quality
	 * video recording; typically this means slower focus
	 * movement and no overshoots. When the AF trigger is not
	 * involved, the AF algorithm should start in INACTIVE state,
	 * and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED
	 * states as appropriate. When the AF trigger is activated,
	 * the algorithm should immediately transition into
	 * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
	 * lens position until a cancel AF trigger is received.</p>
	 * <p>Once cancel is received, the algorithm should transition
	 * back to INACTIVE and resume passive scan. Note that this
	 * behavior is not identical to CONTINUOUS_PICTURE, since an
	 * ongoing PASSIVE_SCAN must immediately be
	 * canceled.</p>
	 */
	CONTROL_AF_MODE_CONTINUOUS_VIDEO = C.ACAMERA_CONTROL_AF_MODE_CONTINUOUS_VIDEO

	/**
	 * <p>In this mode, the AF algorithm modifies the lens
	 * position continually to attempt to provide a
	 * constantly-in-focus image stream.</p>
	 * <p>The focusing behavior should be suitable for still image
	 * capture; typically this means focusing as fast as
	 * possible. When the AF trigger is not involved, the AF
	 * algorithm should start in INACTIVE state, and then
	 * transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as
	 * appropriate as it attempts to maintain focus. When the AF
	 * trigger is activated, the algorithm should finish its
	 * PASSIVE_SCAN if active, and then transition into
	 * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
	 * lens position until a cancel AF trigger is received.</p>
	 * <p>When the AF cancel trigger is activated, the algorithm
	 * should transition back to INACTIVE and then act as if it
	 * has just been started.</p>
	 */
	CONTROL_AF_MODE_CONTINUOUS_PICTURE = C.ACAMERA_CONTROL_AF_MODE_CONTINUOUS_PICTURE

	/**
	 * <p>Extended depth of field (digital focus) mode.</p>
	 * <p>The camera device will produce images with an extended
	 * depth of field automatically; no special focusing
	 * operations need to be done before taking a picture.</p>
	 * <p>AF triggers are ignored, and the AF state will always be
	 * INACTIVE.</p>
	 */
	CONTROL_AF_MODE_EDOF = C.ACAMERA_CONTROL_AF_MODE_EDOF
)
View Source 
const (
	/**
	 * <p>The trigger is idle.</p>
	 */
	CONTROL_AF_TRIGGER_IDLE = C.ACAMERA_CONTROL_AF_TRIGGER_IDLE

	/**
	 * <p>Autofocus will trigger now.</p>
	 */
	CONTROL_AF_TRIGGER_START = C.ACAMERA_CONTROL_AF_TRIGGER_START

	/**
	 * <p>Autofocus will return to its initial
	 * state, and cancel any currently active trigger.</p>
	 */
	CONTROL_AF_TRIGGER_CANCEL = C.ACAMERA_CONTROL_AF_TRIGGER_CANCEL
)
View Source 
const (
	/**
	 * <p>Auto-white balance lock is disabled; the AWB
	 * algorithm is free to update its parameters if in AUTO
	 * mode.</p>
	 */
	CONTROL_AWB_LOCK_OFF = C.ACAMERA_CONTROL_AWB_LOCK_OFF

	/**
	 * <p>Auto-white balance lock is enabled; the AWB
	 * algorithm will not update its parameters while the lock
	 * is active.</p>
	 */
	CONTROL_AWB_LOCK_ON = C.ACAMERA_CONTROL_AWB_LOCK_ON
)
View Source 
const (
	/**
	 * <p>The camera device's auto-white balance routine is disabled.</p>
	 * <p>The application-selected color transform matrix
	 * (ACAMERA_COLOR_CORRECTION_TRANSFORM) and gains
	 * (ACAMERA_COLOR_CORRECTION_GAINS) are used by the camera
	 * device for manual white balance control.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_OFF = C.ACAMERA_CONTROL_AWB_MODE_OFF

	/**
	 * <p>The camera device's auto-white balance routine is active.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_AUTO = C.ACAMERA_CONTROL_AWB_MODE_AUTO

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses incandescent light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>While the exact white balance transforms are up to the
	 * camera device, they will approximately match the CIE
	 * standard illuminant A.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_INCANDESCENT = C.ACAMERA_CONTROL_AWB_MODE_INCANDESCENT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses fluorescent light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>While the exact white balance transforms are up to the
	 * camera device, they will approximately match the CIE
	 * standard illuminant F2.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_FLUORESCENT = C.ACAMERA_CONTROL_AWB_MODE_FLUORESCENT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses warm fluorescent light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>While the exact white balance transforms are up to the
	 * camera device, they will approximately match the CIE
	 * standard illuminant F4.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_WARM_FLUORESCENT = C.ACAMERA_CONTROL_AWB_MODE_WARM_FLUORESCENT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses daylight light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>While the exact white balance transforms are up to the
	 * camera device, they will approximately match the CIE
	 * standard illuminant D65.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_DAYLIGHT = C.ACAMERA_CONTROL_AWB_MODE_DAYLIGHT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses cloudy daylight light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_CLOUDY_DAYLIGHT = C.ACAMERA_CONTROL_AWB_MODE_CLOUDY_DAYLIGHT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses twilight light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_TWILIGHT = C.ACAMERA_CONTROL_AWB_MODE_TWILIGHT

	/**
	 * <p>The camera device's auto-white balance routine is disabled;
	 * the camera device uses shade light as the assumed scene
	 * illumination for white balance.</p>
	 * <p>The application's values for ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * and ACAMERA_COLOR_CORRECTION_GAINS are ignored.
	 * For devices that support the MANUAL_POST_PROCESSING capability, the
	 * values used by the camera device for the transform and gains
	 * will be available in the capture result for this request.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 */
	CONTROL_AWB_MODE_SHADE = C.ACAMERA_CONTROL_AWB_MODE_SHADE
)
View Source 
const (
	/**
	 * <p>The goal of this request doesn't fall into the other
	 * categories. The camera device will default to preview-like
	 * behavior.</p>
	 */
	CONTROL_CAPTURE_INTENT_CUSTOM = C.ACAMERA_CONTROL_CAPTURE_INTENT_CUSTOM

	/**
	 * <p>This request is for a preview-like use case.</p>
	 * <p>The precapture trigger may be used to start off a metering
	 * w/flash sequence.</p>
	 */
	CONTROL_CAPTURE_INTENT_PREVIEW = C.ACAMERA_CONTROL_CAPTURE_INTENT_PREVIEW

	/**
	 * <p>This request is for a still capture-type
	 * use case.</p>
	 * <p>If the flash unit is under automatic control, it may fire as needed.</p>
	 */
	CONTROL_CAPTURE_INTENT_STILL_CAPTURE = C.ACAMERA_CONTROL_CAPTURE_INTENT_STILL_CAPTURE

	/**
	 * <p>This request is for a video recording
	 * use case.</p>
	 */
	CONTROL_CAPTURE_INTENT_VIDEO_RECORD = C.ACAMERA_CONTROL_CAPTURE_INTENT_VIDEO_RECORD

	/**
	 * <p>This request is for a video snapshot (still
	 * image while recording video) use case.</p>
	 * <p>The camera device should take the highest-quality image
	 * possible (given the other settings) without disrupting the
	 * frame rate of video recording.  </p>
	 */
	CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT = C.ACAMERA_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT

	/**
	 * <p>This request is for a ZSL usecase; the
	 * application will stream full-resolution images and
	 * reprocess one or several later for a final
	 * capture.</p>
	 */
	CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG = C.ACAMERA_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG

	/**
	 * <p>This request is for manual capture use case where
	 * the applications want to directly control the capture parameters.</p>
	 * <p>For example, the application may wish to manually control
	 * ACAMERA_SENSOR_EXPOSURE_TIME, ACAMERA_SENSOR_SENSITIVITY, etc.</p>
	 *
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_CAPTURE_INTENT_MANUAL = C.ACAMERA_CONTROL_CAPTURE_INTENT_MANUAL
)
View Source 
const (
	/**
	 * <p>No color effect will be applied.</p>
	 */
	CONTROL_EFFECT_MODE_OFF = C.ACAMERA_CONTROL_EFFECT_MODE_OFF

	/**
	 * <p>A "monocolor" effect where the image is mapped into
	 * a single color.</p>
	 * <p>This will typically be grayscale.</p>
	 */
	CONTROL_EFFECT_MODE_MONO = C.ACAMERA_CONTROL_EFFECT_MODE_MONO

	/**
	 * <p>A "photo-negative" effect where the image's colors
	 * are inverted.</p>
	 */
	CONTROL_EFFECT_MODE_NEGATIVE = C.ACAMERA_CONTROL_EFFECT_MODE_NEGATIVE

	/**
	 * <p>A "solarisation" effect (Sabattier effect) where the
	 * image is wholly or partially reversed in
	 * tone.</p>
	 */
	CONTROL_EFFECT_MODE_SOLARIZE = C.ACAMERA_CONTROL_EFFECT_MODE_SOLARIZE

	/**
	 * <p>A "sepia" effect where the image is mapped into warm
	 * gray, red, and brown tones.</p>
	 */
	CONTROL_EFFECT_MODE_SEPIA = C.ACAMERA_CONTROL_EFFECT_MODE_SEPIA

	/**
	 * <p>A "posterization" effect where the image uses
	 * discrete regions of tone rather than a continuous
	 * gradient of tones.</p>
	 */
	CONTROL_EFFECT_MODE_POSTERIZE = C.ACAMERA_CONTROL_EFFECT_MODE_POSTERIZE

	/**
	 * <p>A "whiteboard" effect where the image is typically displayed
	 * as regions of white, with black or grey details.</p>
	 */
	CONTROL_EFFECT_MODE_WHITEBOARD = C.ACAMERA_CONTROL_EFFECT_MODE_WHITEBOARD

	/**
	 * <p>A "blackboard" effect where the image is typically displayed
	 * as regions of black, with white or grey details.</p>
	 */
	CONTROL_EFFECT_MODE_BLACKBOARD = C.ACAMERA_CONTROL_EFFECT_MODE_BLACKBOARD

	/**
	 * <p>An "aqua" effect where a blue hue is added to the image.</p>
	 */
	CONTROL_EFFECT_MODE_AQUA = C.ACAMERA_CONTROL_EFFECT_MODE_AQUA
)
View Source 
const (
	/**
	 * <p>Full application control of pipeline.</p>
	 * <p>All control by the device's metering and focusing (3A)
	 * routines is disabled, and no other settings in
	 * ACAMERA_CONTROL_* have any effect, except that
	 * ACAMERA_CONTROL_CAPTURE_INTENT may be used by the camera
	 * device to select post-processing values for processing
	 * blocks that do not allow for manual control, or are not
	 * exposed by the camera API.</p>
	 * <p>However, the camera device's 3A routines may continue to
	 * collect statistics and update their internal state so that
	 * when control is switched to AUTO mode, good control values
	 * can be immediately applied.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_MODE_OFF = C.ACAMERA_CONTROL_MODE_OFF

	/**
	 * <p>Use settings for each individual 3A routine.</p>
	 * <p>Manual control of capture parameters is disabled. All
	 * controls in ACAMERA_CONTROL_* besides sceneMode take
	 * effect.</p>
	 */
	CONTROL_MODE_AUTO = C.ACAMERA_CONTROL_MODE_AUTO

	/**
	 * <p>Use a specific scene mode.</p>
	 * <p>Enabling this disables control.aeMode, control.awbMode and
	 * control.afMode controls; the camera device will ignore
	 * those settings while USE_SCENE_MODE is active (except for
	 * FACE_PRIORITY scene mode). Other control entries are still active.
	 * This setting can only be used if scene mode is supported (i.e.
	 * ACAMERA_CONTROL_AVAILABLE_SCENE_MODES
	 * contain some modes other than DISABLED).</p>
	 *
	 * @see ACAMERA_CONTROL_AVAILABLE_SCENE_MODES
	 */
	CONTROL_MODE_USE_SCENE_MODE = C.ACAMERA_CONTROL_MODE_USE_SCENE_MODE

	/**
	 * <p>Same as OFF mode, except that this capture will not be
	 * used by camera device background auto-exposure, auto-white balance and
	 * auto-focus algorithms (3A) to update their statistics.</p>
	 * <p>Specifically, the 3A routines are locked to the last
	 * values set from a request with AUTO, OFF, or
	 * USE_SCENE_MODE, and any statistics or state updates
	 * collected from manual captures with OFF_KEEP_STATE will be
	 * discarded by the camera device.</p>
	 */
	CONTROL_MODE_OFF_KEEP_STATE = C.ACAMERA_CONTROL_MODE_OFF_KEEP_STATE
)
View Source 
const (
	/**
	 * <p>Indicates that no scene modes are set for a given capture request.</p>
	 */
	CONTROL_SCENE_MODE_DISABLED = C.ACAMERA_CONTROL_SCENE_MODE_DISABLED

	/**
	 * <p>If face detection support exists, use face
	 * detection data for auto-focus, auto-white balance, and
	 * auto-exposure routines.</p>
	 * <p>If face detection statistics are disabled
	 * (i.e. ACAMERA_STATISTICS_FACE_DETECT_MODE is set to OFF),
	 * this should still operate correctly (but will not return
	 * face detection statistics to the framework).</p>
	 * <p>Unlike the other scene modes, ACAMERA_CONTROL_AE_MODE,
	 * ACAMERA_CONTROL_AWB_MODE, and ACAMERA_CONTROL_AF_MODE
	 * remain active when FACE_PRIORITY is set.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 */
	CONTROL_SCENE_MODE_FACE_PRIORITY = C.ACAMERA_CONTROL_SCENE_MODE_FACE_PRIORITY

	/**
	 * <p>Optimized for photos of quickly moving objects.</p>
	 * <p>Similar to SPORTS.</p>
	 */
	CONTROL_SCENE_MODE_ACTION = C.ACAMERA_CONTROL_SCENE_MODE_ACTION

	/**
	 * <p>Optimized for still photos of people.</p>
	 */
	CONTROL_SCENE_MODE_PORTRAIT = C.ACAMERA_CONTROL_SCENE_MODE_PORTRAIT

	/**
	 * <p>Optimized for photos of distant macroscopic objects.</p>
	 */
	CONTROL_SCENE_MODE_LANDSCAPE = C.ACAMERA_CONTROL_SCENE_MODE_LANDSCAPE

	/**
	 * <p>Optimized for low-light settings.</p>
	 */
	CONTROL_SCENE_MODE_NIGHT = C.ACAMERA_CONTROL_SCENE_MODE_NIGHT

	/**
	 * <p>Optimized for still photos of people in low-light
	 * settings.</p>
	 */
	CONTROL_SCENE_MODE_NIGHT_PORTRAIT = C.ACAMERA_CONTROL_SCENE_MODE_NIGHT_PORTRAIT

	/**
	 * <p>Optimized for dim, indoor settings where flash must
	 * remain off.</p>
	 */
	CONTROL_SCENE_MODE_THEATRE = C.ACAMERA_CONTROL_SCENE_MODE_THEATRE

	/**
	 * <p>Optimized for bright, outdoor beach settings.</p>
	 */
	CONTROL_SCENE_MODE_BEACH = C.ACAMERA_CONTROL_SCENE_MODE_BEACH

	/**
	 * <p>Optimized for bright, outdoor settings containing snow.</p>
	 */
	CONTROL_SCENE_MODE_SNOW = C.ACAMERA_CONTROL_SCENE_MODE_SNOW

	/**
	 * <p>Optimized for scenes of the setting sun.</p>
	 */
	CONTROL_SCENE_MODE_SUNSET = C.ACAMERA_CONTROL_SCENE_MODE_SUNSET

	/**
	 * <p>Optimized to avoid blurry photos due to small amounts of
	 * device motion (for example: due to hand shake).</p>
	 */
	CONTROL_SCENE_MODE_STEADYPHOTO = C.ACAMERA_CONTROL_SCENE_MODE_STEADYPHOTO

	/**
	 * <p>Optimized for nighttime photos of fireworks.</p>
	 */
	CONTROL_SCENE_MODE_FIREWORKS = C.ACAMERA_CONTROL_SCENE_MODE_FIREWORKS

	/**
	 * <p>Optimized for photos of quickly moving people.</p>
	 * <p>Similar to ACTION.</p>
	 */
	CONTROL_SCENE_MODE_SPORTS = C.ACAMERA_CONTROL_SCENE_MODE_SPORTS

	/**
	 * <p>Optimized for dim, indoor settings with multiple moving
	 * people.</p>
	 */
	CONTROL_SCENE_MODE_PARTY = C.ACAMERA_CONTROL_SCENE_MODE_PARTY

	/**
	 * <p>Optimized for dim settings where the main light source
	 * is a flame.</p>
	 */
	CONTROL_SCENE_MODE_CANDLELIGHT = C.ACAMERA_CONTROL_SCENE_MODE_CANDLELIGHT

	/**
	 * <p>Optimized for accurately capturing a photo of barcode
	 * for use by camera applications that wish to read the
	 * barcode value.</p>
	 */
	CONTROL_SCENE_MODE_BARCODE = C.ACAMERA_CONTROL_SCENE_MODE_BARCODE

	/**
	 * <p>Turn on a device-specific high dynamic range (HDR) mode.</p>
	 * <p>In this scene mode, the camera device captures images
	 * that keep a larger range of scene illumination levels
	 * visible in the final image. For example, when taking a
	 * picture of a object in front of a bright window, both
	 * the object and the scene through the window may be
	 * visible when using HDR mode, while in normal AUTO mode,
	 * one or the other may be poorly exposed. As a tradeoff,
	 * HDR mode generally takes much longer to capture a single
	 * image, has no user control, and may have other artifacts
	 * depending on the HDR method used.</p>
	 * <p>Therefore, HDR captures operate at a much slower rate
	 * than regular captures.</p>
	 * <p>In this mode, on LIMITED or FULL devices, when a request
	 * is made with a ACAMERA_CONTROL_CAPTURE_INTENT of
	 * STILL_CAPTURE, the camera device will capture an image
	 * using a high dynamic range capture technique.  On LEGACY
	 * devices, captures that target a JPEG-format output will
	 * be captured with HDR, and the capture intent is not
	 * relevant.</p>
	 * <p>The HDR capture may involve the device capturing a burst
	 * of images internally and combining them into one, or it
	 * may involve the device using specialized high dynamic
	 * range capture hardware. In all cases, a single image is
	 * produced in response to a capture request submitted
	 * while in HDR mode.</p>
	 * <p>Since substantial post-processing is generally needed to
	 * produce an HDR image, only YUV, PRIVATE, and JPEG
	 * outputs are supported for LIMITED/FULL device HDR
	 * captures, and only JPEG outputs are supported for LEGACY
	 * HDR captures. Using a RAW output for HDR capture is not
	 * supported.</p>
	 * <p>Some devices may also support always-on HDR, which
	 * applies HDR processing at full frame rate.  For these
	 * devices, intents other than STILL_CAPTURE will also
	 * produce an HDR output with no frame rate impact compared
	 * to normal operation, though the quality may be lower
	 * than for STILL_CAPTURE intents.</p>
	 * <p>If SCENE_MODE_HDR is used with unsupported output types
	 * or capture intents, the images captured will be as if
	 * the SCENE_MODE was not enabled at all.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_SCENE_MODE_HDR = C.ACAMERA_CONTROL_SCENE_MODE_HDR
)
View Source 
const (
	/**
	 * <p>Video stabilization is disabled.</p>
	 */
	CONTROL_VIDEO_STABILIZATION_MODE_OFF = C.ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE_OFF

	/**
	 * <p>Video stabilization is enabled.</p>
	 */
	CONTROL_VIDEO_STABILIZATION_MODE_ON = C.ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE_ON
)
View Source 
const (
	/**
	 * <p>AE is off or recently reset.</p>
	 * <p>When a camera device is opened, it starts in
	 * this state. This is a transient state, the camera device may skip reporting
	 * this state in capture result.</p>
	 */
	CONTROL_AE_STATE_INACTIVE = C.ACAMERA_CONTROL_AE_STATE_INACTIVE

	/**
	 * <p>AE doesn't yet have a good set of control values
	 * for the current scene.</p>
	 * <p>This is a transient state, the camera device may skip
	 * reporting this state in capture result.</p>
	 */
	CONTROL_AE_STATE_SEARCHING = C.ACAMERA_CONTROL_AE_STATE_SEARCHING

	/**
	 * <p>AE has a good set of control values for the
	 * current scene.</p>
	 */
	CONTROL_AE_STATE_CONVERGED = C.ACAMERA_CONTROL_AE_STATE_CONVERGED

	/**
	 * <p>AE has been locked.</p>
	 */
	CONTROL_AE_STATE_LOCKED = C.ACAMERA_CONTROL_AE_STATE_LOCKED

	/**
	 * <p>AE has a good set of control values, but flash
	 * needs to be fired for good quality still
	 * capture.</p>
	 */
	CONTROL_AE_STATE_FLASH_REQUIRED = C.ACAMERA_CONTROL_AE_STATE_FLASH_REQUIRED

	/**
	 * <p>AE has been asked to do a precapture sequence
	 * and is currently executing it.</p>
	 * <p>Precapture can be triggered through setting
	 * ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER to START. Currently
	 * active and completed (if it causes camera device internal AE lock) precapture
	 * metering sequence can be canceled through setting
	 * ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER to CANCEL.</p>
	 * <p>Once PRECAPTURE completes, AE will transition to CONVERGED
	 * or FLASH_REQUIRED as appropriate. This is a transient
	 * state, the camera device may skip reporting this state in
	 * capture result.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 */
	CONTROL_AE_STATE_PRECAPTURE = C.ACAMERA_CONTROL_AE_STATE_PRECAPTURE
)
View Source 
const (
	/**
	 * <p>AF is off or has not yet tried to scan/been asked
	 * to scan.</p>
	 * <p>When a camera device is opened, it starts in this
	 * state. This is a transient state, the camera device may
	 * skip reporting this state in capture
	 * result.</p>
	 */
	CONTROL_AF_STATE_INACTIVE = C.ACAMERA_CONTROL_AF_STATE_INACTIVE

	/**
	 * <p>AF is currently performing an AF scan initiated the
	 * camera device in a continuous autofocus mode.</p>
	 * <p>Only used by CONTINUOUS_* AF modes. This is a transient
	 * state, the camera device may skip reporting this state in
	 * capture result.</p>
	 */
	CONTROL_AF_STATE_PASSIVE_SCAN = C.ACAMERA_CONTROL_AF_STATE_PASSIVE_SCAN

	/**
	 * <p>AF currently believes it is in focus, but may
	 * restart scanning at any time.</p>
	 * <p>Only used by CONTINUOUS_* AF modes. This is a transient
	 * state, the camera device may skip reporting this state in
	 * capture result.</p>
	 */
	CONTROL_AF_STATE_PASSIVE_FOCUSED = C.ACAMERA_CONTROL_AF_STATE_PASSIVE_FOCUSED

	/**
	 * <p>AF is performing an AF scan because it was
	 * triggered by AF trigger.</p>
	 * <p>Only used by AUTO or MACRO AF modes. This is a transient
	 * state, the camera device may skip reporting this state in
	 * capture result.</p>
	 */
	CONTROL_AF_STATE_ACTIVE_SCAN = C.ACAMERA_CONTROL_AF_STATE_ACTIVE_SCAN

	/**
	 * <p>AF believes it is focused correctly and has locked
	 * focus.</p>
	 * <p>This state is reached only after an explicit START AF trigger has been
	 * sent (ACAMERA_CONTROL_AF_TRIGGER), when good focus has been obtained.</p>
	 * <p>The lens will remain stationary until the AF mode (ACAMERA_CONTROL_AF_MODE) is changed or
	 * a new AF trigger is sent to the camera device (ACAMERA_CONTROL_AF_TRIGGER).</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AF_TRIGGER
	 */
	CONTROL_AF_STATE_FOCUSED_LOCKED = C.ACAMERA_CONTROL_AF_STATE_FOCUSED_LOCKED

	/**
	 * <p>AF has failed to focus successfully and has locked
	 * focus.</p>
	 * <p>This state is reached only after an explicit START AF trigger has been
	 * sent (ACAMERA_CONTROL_AF_TRIGGER), when good focus cannot be obtained.</p>
	 * <p>The lens will remain stationary until the AF mode (ACAMERA_CONTROL_AF_MODE) is changed or
	 * a new AF trigger is sent to the camera device (ACAMERA_CONTROL_AF_TRIGGER).</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AF_TRIGGER
	 */
	CONTROL_AF_STATE_NOT_FOCUSED_LOCKED = C.ACAMERA_CONTROL_AF_STATE_NOT_FOCUSED_LOCKED

	/**
	 * <p>AF finished a passive scan without finding focus,
	 * and may restart scanning at any time.</p>
	 * <p>Only used by CONTINUOUS_* AF modes. This is a transient state, the camera
	 * device may skip reporting this state in capture result.</p>
	 * <p>LEGACY camera devices do not support this state. When a passive
	 * scan has finished, it will always go to PASSIVE_FOCUSED.</p>
	 */
	CONTROL_AF_STATE_PASSIVE_UNFOCUSED = C.ACAMERA_CONTROL_AF_STATE_PASSIVE_UNFOCUSED
)
View Source 
const (
	/**
	 * <p>AWB is not in auto mode, or has not yet started metering.</p>
	 * <p>When a camera device is opened, it starts in this
	 * state. This is a transient state, the camera device may
	 * skip reporting this state in capture
	 * result.</p>
	 */
	CONTROL_AWB_STATE_INACTIVE = C.ACAMERA_CONTROL_AWB_STATE_INACTIVE

	/**
	 * <p>AWB doesn't yet have a good set of control
	 * values for the current scene.</p>
	 * <p>This is a transient state, the camera device
	 * may skip reporting this state in capture result.</p>
	 */
	CONTROL_AWB_STATE_SEARCHING = C.ACAMERA_CONTROL_AWB_STATE_SEARCHING

	/**
	 * <p>AWB has a good set of control values for the
	 * current scene.</p>
	 */
	CONTROL_AWB_STATE_CONVERGED = C.ACAMERA_CONTROL_AWB_STATE_CONVERGED

	/**
	 * <p>AWB has been locked.</p>
	 */
	CONTROL_AWB_STATE_LOCKED = C.ACAMERA_CONTROL_AWB_STATE_LOCKED
)
View Source 
const (
	CONTROL_AE_LOCK_AVAILABLE_FALSE = C.ACAMERA_CONTROL_AE_LOCK_AVAILABLE_FALSE

	CONTROL_AE_LOCK_AVAILABLE_TRUE = C.ACAMERA_CONTROL_AE_LOCK_AVAILABLE_TRUE
)
View Source 
const (
	CONTROL_AWB_LOCK_AVAILABLE_FALSE = C.ACAMERA_CONTROL_AWB_LOCK_AVAILABLE_FALSE

	CONTROL_AWB_LOCK_AVAILABLE_TRUE = C.ACAMERA_CONTROL_AWB_LOCK_AVAILABLE_TRUE
)
View Source 
const (
	/**
	 * <p>Requests with ACAMERA_CONTROL_CAPTURE_INTENT == STILL_CAPTURE must be captured
	 * after previous requests.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_ENABLE_ZSL_FALSE = C.ACAMERA_CONTROL_ENABLE_ZSL_FALSE

	/**
	 * <p>Requests with ACAMERA_CONTROL_CAPTURE_INTENT == STILL_CAPTURE may or may not be
	 * captured before previous requests.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_ENABLE_ZSL_TRUE = C.ACAMERA_CONTROL_ENABLE_ZSL_TRUE
)
View Source 
const (
	/**
	 * <p>No edge enhancement is applied.</p>
	 */
	EDGE_MODE_OFF = C.ACAMERA_EDGE_MODE_OFF

	/**
	 * <p>Apply edge enhancement at a quality level that does not slow down frame rate
	 * relative to sensor output. It may be the same as OFF if edge enhancement will
	 * slow down frame rate relative to sensor.</p>
	 */
	EDGE_MODE_FAST = C.ACAMERA_EDGE_MODE_FAST

	/**
	 * <p>Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.</p>
	 */
	EDGE_MODE_HIGH_QUALITY = C.ACAMERA_EDGE_MODE_HIGH_QUALITY

	/**
	 * <p>Edge enhancement is applied at different levels for different output streams,
	 * based on resolution. Streams at maximum recording resolution (see {@link
	 * ACameraDevice_createCaptureSession}) or below have
	 * edge enhancement applied, while higher-resolution streams have no edge enhancement
	 * applied. The level of edge enhancement for low-resolution streams is tuned so that
	 * frame rate is not impacted, and the quality is equal to or better than FAST (since it
	 * is only applied to lower-resolution outputs, quality may improve from FAST).</p>
	 * <p>This mode is intended to be used by applications operating in a zero-shutter-lag mode
	 * with YUV or PRIVATE reprocessing, where the application continuously captures
	 * high-resolution intermediate buffers into a circular buffer, from which a final image is
	 * produced via reprocessing when a user takes a picture.  For such a use case, the
	 * high-resolution buffers must not have edge enhancement applied to maximize efficiency of
	 * preview and to avoid double-applying enhancement when reprocessed, while low-resolution
	 * buffers (used for recording or preview, generally) need edge enhancement applied for
	 * reasonable preview quality.</p>
	 * <p>This mode is guaranteed to be supported by devices that support either the
	 * YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
	 * (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES lists either of those capabilities) and it will
	 * be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	EDGE_MODE_ZERO_SHUTTER_LAG = C.ACAMERA_EDGE_MODE_ZERO_SHUTTER_LAG
)
View Source 
const (
	/**
	 * <p>Do not fire the flash for this capture.</p>
	 */
	FLASH_MODE_OFF = C.ACAMERA_FLASH_MODE_OFF

	/**
	 * <p>If the flash is available and charged, fire flash
	 * for this capture.</p>
	 */
	FLASH_MODE_SINGLE = C.ACAMERA_FLASH_MODE_SINGLE

	/**
	 * <p>Transition flash to continuously on.</p>
	 */
	FLASH_MODE_TORCH = C.ACAMERA_FLASH_MODE_TORCH
)
View Source 
const (
	/**
	 * <p>No flash on camera.</p>
	 */
	FLASH_STATE_UNAVAILABLE = C.ACAMERA_FLASH_STATE_UNAVAILABLE

	/**
	 * <p>Flash is charging and cannot be fired.</p>
	 */
	FLASH_STATE_CHARGING = C.ACAMERA_FLASH_STATE_CHARGING

	/**
	 * <p>Flash is ready to fire.</p>
	 */
	FLASH_STATE_READY = C.ACAMERA_FLASH_STATE_READY

	/**
	 * <p>Flash fired for this capture.</p>
	 */
	FLASH_STATE_FIRED = C.ACAMERA_FLASH_STATE_FIRED

	/**
	 * <p>Flash partially illuminated this frame.</p>
	 * <p>This is usually due to the next or previous frame having
	 * the flash fire, and the flash spilling into this capture
	 * due to hardware limitations.</p>
	 */
	FLASH_STATE_PARTIAL = C.ACAMERA_FLASH_STATE_PARTIAL
)
View Source 
const (
	FLASH_INFO_AVAILABLE_FALSE = C.ACAMERA_FLASH_INFO_AVAILABLE_FALSE

	FLASH_INFO_AVAILABLE_TRUE = C.ACAMERA_FLASH_INFO_AVAILABLE_TRUE
)
View Source 
const (
	/**
	 * <p>No hot pixel correction is applied.</p>
	 * <p>The frame rate must not be reduced relative to sensor raw output
	 * for this option.</p>
	 * <p>The hotpixel map may be returned in ACAMERA_STATISTICS_HOT_PIXEL_MAP.</p>
	 *
	 * @see ACAMERA_STATISTICS_HOT_PIXEL_MAP
	 */
	HOT_PIXEL_MODE_OFF = C.ACAMERA_HOT_PIXEL_MODE_OFF

	/**
	 * <p>Hot pixel correction is applied, without reducing frame
	 * rate relative to sensor raw output.</p>
	 * <p>The hotpixel map may be returned in ACAMERA_STATISTICS_HOT_PIXEL_MAP.</p>
	 *
	 * @see ACAMERA_STATISTICS_HOT_PIXEL_MAP
	 */
	HOT_PIXEL_MODE_FAST = C.ACAMERA_HOT_PIXEL_MODE_FAST

	/**
	 * <p>High-quality hot pixel correction is applied, at a cost
	 * of possibly reduced frame rate relative to sensor raw output.</p>
	 * <p>The hotpixel map may be returned in ACAMERA_STATISTICS_HOT_PIXEL_MAP.</p>
	 *
	 * @see ACAMERA_STATISTICS_HOT_PIXEL_MAP
	 */
	HOT_PIXEL_MODE_HIGH_QUALITY = C.ACAMERA_HOT_PIXEL_MODE_HIGH_QUALITY
)
View Source 
const (
	/**
	 * <p>Optical stabilization is unavailable.</p>
	 */
	LENS_OPTICAL_STABILIZATION_MODE_OFF = C.ACAMERA_LENS_OPTICAL_STABILIZATION_MODE_OFF

	/**
	 * <p>Optical stabilization is enabled.</p>
	 */
	LENS_OPTICAL_STABILIZATION_MODE_ON = C.ACAMERA_LENS_OPTICAL_STABILIZATION_MODE_ON
)
View Source 
const (
	/**
	 * <p>The camera device faces the same direction as the device's screen.</p>
	 */
	LENS_FACING_FRONT = C.ACAMERA_LENS_FACING_FRONT

	/**
	 * <p>The camera device faces the opposite direction as the device's screen.</p>
	 */
	LENS_FACING_BACK = C.ACAMERA_LENS_FACING_BACK

	/**
	 * <p>The camera device is an external camera, and has no fixed facing relative to the
	 * device's screen.</p>
	 */
	LENS_FACING_EXTERNAL = C.ACAMERA_LENS_FACING_EXTERNAL
)
View Source 
const (
	/**
	 * <p>The lens parameters (ACAMERA_LENS_FOCAL_LENGTH, ACAMERA_LENS_FOCUS_DISTANCE,
	 * ACAMERA_LENS_FILTER_DENSITY and ACAMERA_LENS_APERTURE) are not changing.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 * @see ACAMERA_LENS_FILTER_DENSITY
	 * @see ACAMERA_LENS_FOCAL_LENGTH
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 */
	LENS_STATE_STATIONARY = C.ACAMERA_LENS_STATE_STATIONARY

	/**
	 * <p>One or several of the lens parameters
	 * (ACAMERA_LENS_FOCAL_LENGTH, ACAMERA_LENS_FOCUS_DISTANCE,
	 * ACAMERA_LENS_FILTER_DENSITY or ACAMERA_LENS_APERTURE) is
	 * currently changing.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 * @see ACAMERA_LENS_FILTER_DENSITY
	 * @see ACAMERA_LENS_FOCAL_LENGTH
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 */
	LENS_STATE_MOVING = C.ACAMERA_LENS_STATE_MOVING
)
View Source 
const (
	/**
	 * <p>The lens focus distance is not accurate, and the units used for
	 * ACAMERA_LENS_FOCUS_DISTANCE do not correspond to any physical units.</p>
	 * <p>Setting the lens to the same focus distance on separate occasions may
	 * result in a different real focus distance, depending on factors such
	 * as the orientation of the device, the age of the focusing mechanism,
	 * and the device temperature. The focus distance value will still be
	 * in the range of <code>[0, ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE]</code>, where 0
	 * represents the farthest focus.</p>
	 *
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED = C.ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED

	/**
	 * <p>The lens focus distance is measured in diopters.</p>
	 * <p>However, setting the lens to the same focus distance
	 * on separate occasions may result in a different real
	 * focus distance, depending on factors such as the
	 * orientation of the device, the age of the focusing
	 * mechanism, and the device temperature.</p>
	 */
	LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE = C.ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE

	/**
	 * <p>The lens focus distance is measured in diopters, and
	 * is calibrated.</p>
	 * <p>The lens mechanism is calibrated so that setting the
	 * same focus distance is repeatable on multiple
	 * occasions with good accuracy, and the focus distance
	 * corresponds to the real physical distance to the plane
	 * of best focus.</p>
	 */
	LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED = C.ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED
)
View Source 
const (
	/**
	 * <p>No noise reduction is applied.</p>
	 */
	NOISE_REDUCTION_MODE_OFF = C.ACAMERA_NOISE_REDUCTION_MODE_OFF

	/**
	 * <p>Noise reduction is applied without reducing frame rate relative to sensor
	 * output. It may be the same as OFF if noise reduction will reduce frame rate
	 * relative to sensor.</p>
	 */
	NOISE_REDUCTION_MODE_FAST = C.ACAMERA_NOISE_REDUCTION_MODE_FAST

	/**
	 * <p>High-quality noise reduction is applied, at the cost of possibly reduced frame
	 * rate relative to sensor output.</p>
	 */
	NOISE_REDUCTION_MODE_HIGH_QUALITY = C.ACAMERA_NOISE_REDUCTION_MODE_HIGH_QUALITY

	/**
	 * <p>MINIMAL noise reduction is applied without reducing frame rate relative to
	 * sensor output. </p>
	 */
	NOISE_REDUCTION_MODE_MINIMAL = C.ACAMERA_NOISE_REDUCTION_MODE_MINIMAL

	/**
	 * <p>Noise reduction is applied at different levels for different output streams,
	 * based on resolution. Streams at maximum recording resolution (see {@link
	 * ACameraDevice_createCaptureSession}) or below have noise
	 * reduction applied, while higher-resolution streams have MINIMAL (if supported) or no
	 * noise reduction applied (if MINIMAL is not supported.) The degree of noise reduction
	 * for low-resolution streams is tuned so that frame rate is not impacted, and the quality
	 * is equal to or better than FAST (since it is only applied to lower-resolution outputs,
	 * quality may improve from FAST).</p>
	 * <p>This mode is intended to be used by applications operating in a zero-shutter-lag mode
	 * with YUV or PRIVATE reprocessing, where the application continuously captures
	 * high-resolution intermediate buffers into a circular buffer, from which a final image is
	 * produced via reprocessing when a user takes a picture.  For such a use case, the
	 * high-resolution buffers must not have noise reduction applied to maximize efficiency of
	 * preview and to avoid over-applying noise filtering when reprocessing, while
	 * low-resolution buffers (used for recording or preview, generally) need noise reduction
	 * applied for reasonable preview quality.</p>
	 * <p>This mode is guaranteed to be supported by devices that support either the
	 * YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
	 * (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES lists either of those capabilities) and it will
	 * be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG = C.ACAMERA_NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG
)
View Source 
const (
	/**
	 * <p>The minimal set of capabilities that every camera
	 * device (regardless of ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL)
	 * supports.</p>
	 * <p>This capability is listed by all normal devices, and
	 * indicates that the camera device has a feature set
	 * that's comparable to the baseline requirements for the
	 * older android.hardware.Camera API.</p>
	 * <p>Devices with the DEPTH_OUTPUT capability might not list this
	 * capability, indicating that they support only depth measurement,
	 * not standard color output.</p>
	 *
	 * @see ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL
	 */
	REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE

	/**
	 * <p>The camera device can be manually controlled (3A algorithms such
	 * as auto-exposure, and auto-focus can be bypassed).
	 * The camera device supports basic manual control of the sensor image
	 * acquisition related stages. This means the following controls are
	 * guaranteed to be supported:</p>
	 * <ul>
	 * <li>Manual frame duration control<ul>
	 * <li>ACAMERA_SENSOR_FRAME_DURATION</li>
	 * <li>ACAMERA_SENSOR_INFO_MAX_FRAME_DURATION</li>
	 * </ul>
	 * </li>
	 * <li>Manual exposure control<ul>
	 * <li>ACAMERA_SENSOR_EXPOSURE_TIME</li>
	 * <li>ACAMERA_SENSOR_INFO_EXPOSURE_TIME_RANGE</li>
	 * </ul>
	 * </li>
	 * <li>Manual sensitivity control<ul>
	 * <li>ACAMERA_SENSOR_SENSITIVITY</li>
	 * <li>ACAMERA_SENSOR_INFO_SENSITIVITY_RANGE</li>
	 * </ul>
	 * </li>
	 * <li>Manual lens control (if the lens is adjustable)<ul>
	 * <li>ACAMERA_LENS_*</li>
	 * </ul>
	 * </li>
	 * <li>Manual flash control (if a flash unit is present)<ul>
	 * <li>ACAMERA_FLASH_*</li>
	 * </ul>
	 * </li>
	 * <li>Manual black level locking<ul>
	 * <li>ACAMERA_BLACK_LEVEL_LOCK</li>
	 * </ul>
	 * </li>
	 * <li>Auto exposure lock<ul>
	 * <li>ACAMERA_CONTROL_AE_LOCK</li>
	 * </ul>
	 * </li>
	 * </ul>
	 * <p>If any of the above 3A algorithms are enabled, then the camera
	 * device will accurately report the values applied by 3A in the
	 * result.</p>
	 * <p>A given camera device may also support additional manual sensor controls,
	 * but this capability only covers the above list of controls.</p>
	 * <p>If this is supported, android.scaler.streamConfigurationMap will
	 * additionally return a min frame duration that is greater than
	 * zero for each supported size-format combination.</p>
	 *
	 * @see ACAMERA_BLACK_LEVEL_LOCK
	 * @see ACAMERA_CONTROL_AE_LOCK
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 * @see ACAMERA_SENSOR_INFO_EXPOSURE_TIME_RANGE
	 * @see ACAMERA_SENSOR_INFO_MAX_FRAME_DURATION
	 * @see ACAMERA_SENSOR_INFO_SENSITIVITY_RANGE
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR

	/**
	 * <p>The camera device post-processing stages can be manually controlled.
	 * The camera device supports basic manual control of the image post-processing
	 * stages. This means the following controls are guaranteed to be supported:</p>
	 * <ul>
	 * <li>
	 * <p>Manual tonemap control</p>
	 * <ul>
	 * <li>android.tonemap.curve</li>
	 * <li>ACAMERA_TONEMAP_MODE</li>
	 * <li>ACAMERA_TONEMAP_MAX_CURVE_POINTS</li>
	 * <li>ACAMERA_TONEMAP_GAMMA</li>
	 * <li>ACAMERA_TONEMAP_PRESET_CURVE</li>
	 * </ul>
	 * </li>
	 * <li>
	 * <p>Manual white balance control</p>
	 * <ul>
	 * <li>ACAMERA_COLOR_CORRECTION_TRANSFORM</li>
	 * <li>ACAMERA_COLOR_CORRECTION_GAINS</li>
	 * </ul>
	 * </li>
	 * <li>Manual lens shading map control<ul>
	 * <li>ACAMERA_SHADING_MODE</li>
	 * <li>ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE</li>
	 * <li>ACAMERA_STATISTICS_LENS_SHADING_MAP</li>
	 * <li>ACAMERA_LENS_INFO_SHADING_MAP_SIZE</li>
	 * </ul>
	 * </li>
	 * <li>Manual aberration correction control (if aberration correction is supported)<ul>
	 * <li>ACAMERA_COLOR_CORRECTION_ABERRATION_MODE</li>
	 * <li>ACAMERA_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES</li>
	 * </ul>
	 * </li>
	 * <li>Auto white balance lock<ul>
	 * <li>ACAMERA_CONTROL_AWB_LOCK</li>
	 * </ul>
	 * </li>
	 * </ul>
	 * <p>If auto white balance is enabled, then the camera device
	 * will accurately report the values applied by AWB in the result.</p>
	 * <p>A given camera device may also support additional post-processing
	 * controls, but this capability only covers the above list of controls.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_ABERRATION_MODE
	 * @see ACAMERA_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * @see ACAMERA_CONTROL_AWB_LOCK
	 * @see ACAMERA_LENS_INFO_SHADING_MAP_SIZE
	 * @see ACAMERA_SHADING_MODE
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE
	 * @see ACAMERA_TONEMAP_GAMMA
	 * @see ACAMERA_TONEMAP_MAX_CURVE_POINTS
	 * @see ACAMERA_TONEMAP_MODE
	 * @see ACAMERA_TONEMAP_PRESET_CURVE
	 */
	REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING

	/**
	 * <p>The camera device supports outputting RAW buffers and
	 * metadata for interpreting them.</p>
	 * <p>Devices supporting the RAW capability allow both for
	 * saving DNG files, and for direct application processing of
	 * raw sensor images.</p>
	 * <ul>
	 * <li>RAW_SENSOR is supported as an output format.</li>
	 * <li>The maximum available resolution for RAW_SENSOR streams
	 *   will match either the value in
	 *   ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE or
	 *   ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE.</li>
	 * <li>All DNG-related optional metadata entries are provided
	 *   by the camera device.</li>
	 * </ul>
	 *
	 * @see ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 * @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
	 */
	REQUEST_AVAILABLE_CAPABILITIES_RAW = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_RAW

	/**
	 * <p>The camera device supports accurately reporting the sensor settings for many of
	 * the sensor controls while the built-in 3A algorithm is running.  This allows
	 * reporting of sensor settings even when these settings cannot be manually changed.</p>
	 * <p>The values reported for the following controls are guaranteed to be available
	 * in the CaptureResult, including when 3A is enabled:</p>
	 * <ul>
	 * <li>Exposure control<ul>
	 * <li>ACAMERA_SENSOR_EXPOSURE_TIME</li>
	 * </ul>
	 * </li>
	 * <li>Sensitivity control<ul>
	 * <li>ACAMERA_SENSOR_SENSITIVITY</li>
	 * </ul>
	 * </li>
	 * <li>Lens controls (if the lens is adjustable)<ul>
	 * <li>ACAMERA_LENS_FOCUS_DISTANCE</li>
	 * <li>ACAMERA_LENS_APERTURE</li>
	 * </ul>
	 * </li>
	 * </ul>
	 * <p>This capability is a subset of the MANUAL_SENSOR control capability, and will
	 * always be included if the MANUAL_SENSOR capability is available.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS

	/**
	 * <p>The camera device supports capturing high-resolution images at &gt;= 20 frames per
	 * second, in at least the uncompressed YUV format, when post-processing settings are set
	 * to FAST. Additionally, maximum-resolution images can be captured at &gt;= 10 frames
	 * per second.  Here, 'high resolution' means at least 8 megapixels, or the maximum
	 * resolution of the device, whichever is smaller.</p>
	 * <p>More specifically, this means that at least one output {@link
	 * AIMAGE_FORMAT_YUV_420_888} size listed in
	 * {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS} is larger or equal to the
	 * 'high resolution' defined above, and can be captured at at least 20 fps.
	 * For the largest {@link AIMAGE_FORMAT_YUV_420_888} size listed in
	 * {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}, camera device can capture this
	 * size for at least 10 frames per second.
	 * Also the ACAMERA_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES entry lists at least one FPS range
	 * where the minimum FPS is &gt;= 1 / minimumFrameDuration for the largest YUV_420_888 size.</p>
	 * <p>If the device supports the {@link AIMAGE_FORMAT_RAW10}, {@link
	 * AIMAGE_FORMAT_RAW12}, then those can also be captured at the same rate
	 * as the maximum-size YUV_420_888 resolution is.</p>
	 * <p>In addition, the ACAMERA_SYNC_MAX_LATENCY field is guaranted to have a value between 0
	 * and 4, inclusive. ACAMERA_CONTROL_AE_LOCK_AVAILABLE and ACAMERA_CONTROL_AWB_LOCK_AVAILABLE
	 * are also guaranteed to be <code>true</code> so burst capture with these two locks ON yields
	 * consistent image output.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES
	 * @see ACAMERA_CONTROL_AE_LOCK_AVAILABLE
	 * @see ACAMERA_CONTROL_AWB_LOCK_AVAILABLE
	 * @see ACAMERA_SYNC_MAX_LATENCY
	 */
	REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE

	/**
	 * <p>The camera device can produce depth measurements from its field of view.</p>
	 * <p>This capability requires the camera device to support the following:</p>
	 * <ul>
	 * <li>{@link AIMAGE_FORMAT_DEPTH16} is supported as an output format.</li>
	 * <li>{@link AIMAGE_FORMAT_DEPTH_POINT_CLOUD} is optionally supported as an
	 *   output format.</li>
	 * <li>This camera device, and all camera devices with the same ACAMERA_LENS_FACING,
	 *   will list the following calibration entries in {@link ACameraMetadata} from both
	 *   {@link ACameraManager_getCameraCharacteristics} and
	 *   {@link ACameraCaptureSession_captureCallback_result}:<ul>
	 * <li>ACAMERA_LENS_POSE_TRANSLATION</li>
	 * <li>ACAMERA_LENS_POSE_ROTATION</li>
	 * <li>ACAMERA_LENS_INTRINSIC_CALIBRATION</li>
	 * <li>ACAMERA_LENS_RADIAL_DISTORTION</li>
	 * </ul>
	 * </li>
	 * <li>The ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE entry is listed by this device.</li>
	 * <li>A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support
	 *   normal YUV_420_888, JPEG, and PRIV-format outputs. It only has to support the DEPTH16
	 *   format.</li>
	 * </ul>
	 * <p>Generally, depth output operates at a slower frame rate than standard color capture,
	 * so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that
	 * should be accounted for (see
	 * {@link ACAMERA_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS}).
	 * On a device that supports both depth and color-based output, to enable smooth preview,
	 * using a repeating burst is recommended, where a depth-output target is only included
	 * once every N frames, where N is the ratio between preview output rate and depth output
	 * rate, including depth stall time.</p>
	 *
	 * @see ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE
	 * @see ACAMERA_LENS_FACING
	 * @see ACAMERA_LENS_INTRINSIC_CALIBRATION
	 * @see ACAMERA_LENS_POSE_ROTATION
	 * @see ACAMERA_LENS_POSE_TRANSLATION
	 * @see ACAMERA_LENS_RADIAL_DISTORTION
	 */
	REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT
)
View Source 
const (
	SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT = C.ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT

	SCALER_AVAILABLE_STREAM_CONFIGURATIONS_INPUT = C.ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_INPUT
)
View Source 
const (
	/**
	 * <p>The camera device only supports centered crop regions.</p>
	 */
	SCALER_CROPPING_TYPE_CENTER_ONLY = C.ACAMERA_SCALER_CROPPING_TYPE_CENTER_ONLY

	/**
	 * <p>The camera device supports arbitrarily chosen crop regions.</p>
	 */
	SCALER_CROPPING_TYPE_FREEFORM = C.ACAMERA_SCALER_CROPPING_TYPE_FREEFORM
)
View Source 
const (
	SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT

	SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT

	/**
	 * <p>Incandescent light</p>
	 */
	SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN

	SENSOR_REFERENCE_ILLUMINANT1_FLASH = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_FLASH

	SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER

	SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER

	SENSOR_REFERENCE_ILLUMINANT1_SHADE = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_SHADE

	/**
	 * <p>D 5700 - 7100K</p>
	 */
	SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT

	/**
	 * <p>N 4600 - 5400K</p>
	 */
	SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT

	/**
	 * <p>W 3900 - 4500K</p>
	 */
	SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT

	/**
	 * <p>WW 3200 - 3700K</p>
	 */
	SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT

	SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A

	SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B

	SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C

	SENSOR_REFERENCE_ILLUMINANT1_D55 = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_D55

	SENSOR_REFERENCE_ILLUMINANT1_D65 = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_D65

	SENSOR_REFERENCE_ILLUMINANT1_D75 = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_D75

	SENSOR_REFERENCE_ILLUMINANT1_D50 = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_D50

	SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN
)
View Source 
const (
	/**
	 * <p>No test pattern mode is used, and the camera
	 * device returns captures from the image sensor.</p>
	 * <p>This is the default if the key is not set.</p>
	 */
	SENSOR_TEST_PATTERN_MODE_OFF = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_OFF

	/**
	 * <p>Each pixel in <code>[R, G_even, G_odd, B]</code> is replaced by its
	 * respective color channel provided in
	 * ACAMERA_SENSOR_TEST_PATTERN_DATA.</p>
	 * <p>For example:</p>
	 * <pre><code>android.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]
	 * </code></pre>
	 * <p>All green pixels are 100% green. All red/blue pixels are black.</p>
	 * <pre><code>android.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]
	 * </code></pre>
	 * <p>All red pixels are 100% red. Only the odd green pixels
	 * are 100% green. All blue pixels are 100% black.</p>
	 *
	 * @see ACAMERA_SENSOR_TEST_PATTERN_DATA
	 */
	SENSOR_TEST_PATTERN_MODE_SOLID_COLOR = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_SOLID_COLOR

	/**
	 * <p>All pixel data is replaced with an 8-bar color pattern.</p>
	 * <p>The vertical bars (left-to-right) are as follows:</p>
	 * <ul>
	 * <li>100% white</li>
	 * <li>yellow</li>
	 * <li>cyan</li>
	 * <li>green</li>
	 * <li>magenta</li>
	 * <li>red</li>
	 * <li>blue</li>
	 * <li>black</li>
	 * </ul>
	 * <p>In general the image would look like the following:</p>
	 * <pre><code>W Y C G M R B K
	 * W Y C G M R B K
	 * W Y C G M R B K
	 * W Y C G M R B K
	 * W Y C G M R B K
	 * . . . . . . . .
	 * . . . . . . . .
	 * . . . . . . . .
	 *
	 * (B = Blue, K = Black)
	 * </code></pre>
	 * <p>Each bar should take up 1/8 of the sensor pixel array width.
	 * When this is not possible, the bar size should be rounded
	 * down to the nearest integer and the pattern can repeat
	 * on the right side.</p>
	 * <p>Each bar's height must always take up the full sensor
	 * pixel array height.</p>
	 * <p>Each pixel in this test pattern must be set to either
	 * 0% intensity or 100% intensity.</p>
	 */
	SENSOR_TEST_PATTERN_MODE_COLOR_BARS = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_COLOR_BARS

	/**
	 * <p>The test pattern is similar to COLOR_BARS, except that
	 * each bar should start at its specified color at the top,
	 * and fade to gray at the bottom.</p>
	 * <p>Furthermore each bar is further subdivided into a left and
	 * right half. The left half should have a smooth gradient,
	 * and the right half should have a quantized gradient.</p>
	 * <p>In particular, the right half's should consist of blocks of the
	 * same color for 1/16th active sensor pixel array width.</p>
	 * <p>The least significant bits in the quantized gradient should
	 * be copied from the most significant bits of the smooth gradient.</p>
	 * <p>The height of each bar should always be a multiple of 128.
	 * When this is not the case, the pattern should repeat at the bottom
	 * of the image.</p>
	 */
	SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY

	/**
	 * <p>All pixel data is replaced by a pseudo-random sequence
	 * generated from a PN9 512-bit sequence (typically implemented
	 * in hardware with a linear feedback shift register).</p>
	 * <p>The generator should be reset at the beginning of each frame,
	 * and thus each subsequent raw frame with this test pattern should
	 * be exactly the same as the last.</p>
	 */
	SENSOR_TEST_PATTERN_MODE_PN9 = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_PN9

	/**
	 * <p>The first custom test pattern. All custom patterns that are
	 * available only on this camera device are at least this numeric
	 * value.</p>
	 * <p>All of the custom test patterns will be static
	 * (that is the raw image must not vary from frame to frame).</p>
	 */
	SENSOR_TEST_PATTERN_MODE_CUSTOM1 = C.ACAMERA_SENSOR_TEST_PATTERN_MODE_CUSTOM1
)
View Source 
const (
	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB

	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG

	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG

	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR

	/**
	 * <p>Sensor is not Bayer; output has 3 16-bit
	 * values for each pixel, instead of just 1 16-bit value
	 * per pixel.</p>
	 */
	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB
)
View Source 
const (
	/**
	 * <p>Timestamps from ACAMERA_SENSOR_TIMESTAMP are in nanoseconds and monotonic,
	 * but can not be compared to timestamps from other subsystems
	 * (e.g. accelerometer, gyro etc.), or other instances of the same or different
	 * camera devices in the same system. Timestamps between streams and results for
	 * a single camera instance are comparable, and the timestamps for all buffers
	 * and the result metadata generated by a single capture are identical.</p>
	 *
	 * @see ACAMERA_SENSOR_TIMESTAMP
	 */
	SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN = C.ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN

	/**
	 * <p>Timestamps from ACAMERA_SENSOR_TIMESTAMP are in the same timebase as
	 * <a href="https://developer.android.com/reference/android/os/SystemClock.html#elapsedRealtimeNanos">elapsedRealtimeNanos</a>
	 * (or CLOCK_BOOTTIME), and they can be compared to other timestamps using that base.</p>
	 *
	 * @see ACAMERA_SENSOR_TIMESTAMP
	 */
	SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME = C.ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME
)
View Source 
const (
	SENSOR_INFO_LENS_SHADING_APPLIED_FALSE = C.ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED_FALSE

	SENSOR_INFO_LENS_SHADING_APPLIED_TRUE = C.ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED_TRUE
)
View Source 
const (
	/**
	 * <p>No lens shading correction is applied.</p>
	 */
	SHADING_MODE_OFF = C.ACAMERA_SHADING_MODE_OFF

	/**
	 * <p>Apply lens shading corrections, without slowing
	 * frame rate relative to sensor raw output</p>
	 */
	SHADING_MODE_FAST = C.ACAMERA_SHADING_MODE_FAST

	/**
	 * <p>Apply high-quality lens shading correction, at the
	 * cost of possibly reduced frame rate.</p>
	 */
	SHADING_MODE_HIGH_QUALITY = C.ACAMERA_SHADING_MODE_HIGH_QUALITY
)
View Source 
const (
	/**
	 * <p>Do not include face detection statistics in capture
	 * results.</p>
	 */
	STATISTICS_FACE_DETECT_MODE_OFF = C.ACAMERA_STATISTICS_FACE_DETECT_MODE_OFF

	/**
	 * <p>Return face rectangle and confidence values only.</p>
	 */
	STATISTICS_FACE_DETECT_MODE_SIMPLE = C.ACAMERA_STATISTICS_FACE_DETECT_MODE_SIMPLE

	/**
	 * <p>Return all face
	 * metadata.</p>
	 * <p>In this mode, face rectangles, scores, landmarks, and face IDs are all valid.</p>
	 */
	STATISTICS_FACE_DETECT_MODE_FULL = C.ACAMERA_STATISTICS_FACE_DETECT_MODE_FULL
)
View Source 
const (
	/**
	 * <p>Hot pixel map production is disabled.</p>
	 */
	STATISTICS_HOT_PIXEL_MAP_MODE_OFF = C.ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE_OFF

	/**
	 * <p>Hot pixel map production is enabled.</p>
	 */
	STATISTICS_HOT_PIXEL_MAP_MODE_ON = C.ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE_ON
)
View Source 
const (
	/**
	 * <p>The camera device does not detect any flickering illumination
	 * in the current scene.</p>
	 */
	STATISTICS_SCENE_FLICKER_NONE = C.ACAMERA_STATISTICS_SCENE_FLICKER_NONE

	/**
	 * <p>The camera device detects illumination flickering at 50Hz
	 * in the current scene.</p>
	 */
	STATISTICS_SCENE_FLICKER_50HZ = C.ACAMERA_STATISTICS_SCENE_FLICKER_50HZ

	/**
	 * <p>The camera device detects illumination flickering at 60Hz
	 * in the current scene.</p>
	 */
	STATISTICS_SCENE_FLICKER_60HZ = C.ACAMERA_STATISTICS_SCENE_FLICKER_60HZ
)
View Source 
const (
	/**
	 * <p>Do not include a lens shading map in the capture result.</p>
	 */
	STATISTICS_LENS_SHADING_MAP_MODE_OFF = C.ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE_OFF

	/**
	 * <p>Include a lens shading map in the capture result.</p>
	 */
	STATISTICS_LENS_SHADING_MAP_MODE_ON = C.ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE_ON
)
View Source 
const (
	/**
	 * <p>Use the tone mapping curve specified in
	 * the ACAMERA_TONEMAPCURVE_* entries.</p>
	 * <p>All color enhancement and tonemapping must be disabled, except
	 * for applying the tonemapping curve specified by
	 * android.tonemap.curve.</p>
	 * <p>Must not slow down frame rate relative to raw
	 * sensor output.</p>
	 */
	TONEMAP_MODE_CONTRAST_CURVE = C.ACAMERA_TONEMAP_MODE_CONTRAST_CURVE

	/**
	 * <p>Advanced gamma mapping and color enhancement may be applied, without
	 * reducing frame rate compared to raw sensor output.</p>
	 */
	TONEMAP_MODE_FAST = C.ACAMERA_TONEMAP_MODE_FAST

	/**
	 * <p>High-quality gamma mapping and color enhancement will be applied, at
	 * the cost of possibly reduced frame rate compared to raw sensor output.</p>
	 */
	TONEMAP_MODE_HIGH_QUALITY = C.ACAMERA_TONEMAP_MODE_HIGH_QUALITY

	/**
	 * <p>Use the gamma value specified in ACAMERA_TONEMAP_GAMMA to peform
	 * tonemapping.</p>
	 * <p>All color enhancement and tonemapping must be disabled, except
	 * for applying the tonemapping curve specified by ACAMERA_TONEMAP_GAMMA.</p>
	 * <p>Must not slow down frame rate relative to raw sensor output.</p>
	 *
	 * @see ACAMERA_TONEMAP_GAMMA
	 */
	TONEMAP_MODE_GAMMA_VALUE = C.ACAMERA_TONEMAP_MODE_GAMMA_VALUE

	/**
	 * <p>Use the preset tonemapping curve specified in
	 * ACAMERA_TONEMAP_PRESET_CURVE to peform tonemapping.</p>
	 * <p>All color enhancement and tonemapping must be disabled, except
	 * for applying the tonemapping curve specified by
	 * ACAMERA_TONEMAP_PRESET_CURVE.</p>
	 * <p>Must not slow down frame rate relative to raw sensor output.</p>
	 *
	 * @see ACAMERA_TONEMAP_PRESET_CURVE
	 */
	TONEMAP_MODE_PRESET_CURVE = C.ACAMERA_TONEMAP_MODE_PRESET_CURVE
)
View Source 
const (
	/**
	 * <p>Tonemapping curve is defined by sRGB</p>
	 */
	TONEMAP_PRESET_CURVE_SRGB = C.ACAMERA_TONEMAP_PRESET_CURVE_SRGB

	/**
	 * <p>Tonemapping curve is defined by ITU-R BT.709</p>
	 */
	TONEMAP_PRESET_CURVE_REC709 = C.ACAMERA_TONEMAP_PRESET_CURVE_REC709
)
View Source 
const (
	/**
	 * <p>This camera device does not have enough capabilities to qualify as a <code>FULL</code> device or
	 * better.</p>
	 * <p>Only the stream configurations listed in the <code>LEGACY</code> and <code>LIMITED</code> tables in the
	 * {@link ACameraDevice_createCaptureSession} documentation are guaranteed to be supported.</p>
	 * <p>All <code>LIMITED</code> devices support the <code>BACKWARDS_COMPATIBLE</code> capability, indicating basic
	 * support for color image capture. The only exception is that the device may
	 * alternatively support only the <code>DEPTH_OUTPUT</code> capability, if it can only output depth
	 * measurements and not color images.</p>
	 * <p><code>LIMITED</code> devices and above require the use of ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * to lock exposure metering (and calculate flash power, for cameras with flash) before
	 * capturing a high-quality still image.</p>
	 * <p>A <code>LIMITED</code> device that only lists the <code>BACKWARDS_COMPATIBLE</code> capability is only
	 * required to support full-automatic operation and post-processing (<code>OFF</code> is not
	 * supported for ACAMERA_CONTROL_AE_MODE, ACAMERA_CONTROL_AF_MODE, or
	 * ACAMERA_CONTROL_AWB_MODE)</p>
	 * <p>Additional capabilities may optionally be supported by a <code>LIMITED</code>-level device, and
	 * can be checked for in ACAMERA_REQUEST_AVAILABLE_CAPABILITIES.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED = C.ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED

	/**
	 * <p>This camera device is capable of supporting advanced imaging applications.</p>
	 * <p>The stream configurations listed in the <code>FULL</code>, <code>LEGACY</code> and <code>LIMITED</code> tables in the
	 * {@link ACameraDevice_createCaptureSession} documentation are guaranteed to be supported.</p>
	 * <p>A <code>FULL</code> device will support below capabilities:</p>
	 * <ul>
	 * <li><code>BURST_CAPTURE</code> capability (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains
	 *   <code>BURST_CAPTURE</code>)</li>
	 * <li>Per frame control (ACAMERA_SYNC_MAX_LATENCY <code>==</code> PER_FRAME_CONTROL)</li>
	 * <li>Manual sensor control (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains <code>MANUAL_SENSOR</code>)</li>
	 * <li>Manual post-processing control (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains
	 *   <code>MANUAL_POST_PROCESSING</code>)</li>
	 * <li>The required exposure time range defined in ACAMERA_SENSOR_INFO_EXPOSURE_TIME_RANGE</li>
	 * <li>The required maxFrameDuration defined in ACAMERA_SENSOR_INFO_MAX_FRAME_DURATION</li>
	 * </ul>
	 * <p>Note:
	 * Pre-API level 23, FULL devices also supported arbitrary cropping region
	 * (ACAMERA_SCALER_CROPPING_TYPE <code>== FREEFORM</code>); this requirement was relaxed in API level
	 * 23, and <code>FULL</code> devices may only support <code>CENTERED</code> cropping.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * @see ACAMERA_SCALER_CROPPING_TYPE
	 * @see ACAMERA_SENSOR_INFO_EXPOSURE_TIME_RANGE
	 * @see ACAMERA_SENSOR_INFO_MAX_FRAME_DURATION
	 * @see ACAMERA_SYNC_MAX_LATENCY
	 */
	INFO_SUPPORTED_HARDWARE_LEVEL_FULL = C.ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_FULL

	/**
	 * <p>This camera device is running in backward compatibility mode.</p>
	 * <p>Only the stream configurations listed in the <code>LEGACY</code> table in the {@link
	 * ACameraDevice_createCaptureSession} documentation are supported.</p>
	 * <p>A <code>LEGACY</code> device does not support per-frame control, manual sensor control, manual
	 * post-processing, arbitrary cropping regions, and has relaxed performance constraints.
	 * No additional capabilities beyond <code>BACKWARD_COMPATIBLE</code> will ever be listed by a
	 * <code>LEGACY</code> device in ACAMERA_REQUEST_AVAILABLE_CAPABILITIES.</p>
	 * <p>In addition, the ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is not functional on <code>LEGACY</code>
	 * devices. Instead, every request that includes a JPEG-format output target is treated
	 * as triggering a still capture, internally executing a precapture trigger.  This may
	 * fire the flash for flash power metering during precapture, and then fire the flash
	 * for the final capture, if a flash is available on the device and the AE mode is set to
	 * enable the flash.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY = C.ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY

	/**
	 * <p>This camera device is capable of YUV reprocessing and RAW data capture, in addition to
	 * FULL-level capabilities.</p>
	 * <p>The stream configurations listed in the <code>LEVEL_3</code>, <code>RAW</code>, <code>FULL</code>, <code>LEGACY</code> and
	 * <code>LIMITED</code> tables in the {@link
	 * ACameraDevice_createCaptureSession}
	 * documentation are guaranteed to be supported.</p>
	 * <p>The following additional capabilities are guaranteed to be supported:</p>
	 * <ul>
	 * <li><code>YUV_REPROCESSING</code> capability (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains
	 *   <code>YUV_REPROCESSING</code>)</li>
	 * <li><code>RAW</code> capability (ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains
	 *   <code>RAW</code>)</li>
	 * </ul>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	INFO_SUPPORTED_HARDWARE_LEVEL_3 = C.ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_3
)
View Source 
const (
	BLACK_LEVEL_LOCK_OFF = C.ACAMERA_BLACK_LEVEL_LOCK_OFF

	BLACK_LEVEL_LOCK_ON = C.ACAMERA_BLACK_LEVEL_LOCK_ON
)
View Source 
const (
	/**
	 * <p>The current result is not yet fully synchronized to any request.</p>
	 * <p>Synchronization is in progress, and reading metadata from this
	 * result may include a mix of data that have taken effect since the
	 * last synchronization time.</p>
	 * <p>In some future result, within ACAMERA_SYNC_MAX_LATENCY frames,
	 * this value will update to the actual frame number frame number
	 * the result is guaranteed to be synchronized to (as long as the
	 * request settings remain constant).</p>
	 *
	 * @see ACAMERA_SYNC_MAX_LATENCY
	 */
	SYNC_FRAME_NUMBER_CONVERGING = C.ACAMERA_SYNC_FRAME_NUMBER_CONVERGING

	/**
	 * <p>The current result's synchronization status is unknown.</p>
	 * <p>The result may have already converged, or it may be in
	 * progress.  Reading from this result may include some mix
	 * of settings from past requests.</p>
	 * <p>After a settings change, the new settings will eventually all
	 * take effect for the output buffers and results. However, this
	 * value will not change when that happens. Altering settings
	 * rapidly may provide outcomes using mixes of settings from recent
	 * requests.</p>
	 * <p>This value is intended primarily for backwards compatibility with
	 * the older camera implementations (for android.hardware.Camera).</p>
	 */
	SYNC_FRAME_NUMBER_UNKNOWN = C.ACAMERA_SYNC_FRAME_NUMBER_UNKNOWN
)
View Source 
const (
	/**
	 * <p>Every frame has the requests immediately applied.</p>
	 * <p>Changing controls over multiple requests one after another will
	 * produce results that have those controls applied atomically
	 * each frame.</p>
	 * <p>All FULL capability devices will have this as their maxLatency.</p>
	 */
	SYNC_MAX_LATENCY_PER_FRAME_CONTROL = C.ACAMERA_SYNC_MAX_LATENCY_PER_FRAME_CONTROL

	/**
	 * <p>Each new frame has some subset (potentially the entire set)
	 * of the past requests applied to the camera settings.</p>
	 * <p>By submitting a series of identical requests, the camera device
	 * will eventually have the camera settings applied, but it is
	 * unknown when that exact point will be.</p>
	 * <p>All LEGACY capability devices will have this as their maxLatency.</p>
	 */
	SYNC_MAX_LATENCY_UNKNOWN = C.ACAMERA_SYNC_MAX_LATENCY_UNKNOWN
)
View Source 
const (
	DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_OUTPUT = C.ACAMERA_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_OUTPUT

	DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_INPUT = C.ACAMERA_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_INPUT
)
View Source 
const (
	DEPTH_DEPTH_IS_EXCLUSIVE_FALSE = C.ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE_FALSE

	DEPTH_DEPTH_IS_EXCLUSIVE_TRUE = C.ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE_TRUE
)
View Source 
const (
	CAPTURE_SEQUENCE_ID_NONE = C.CAPTURE_SEQUENCE_ID_NONE
)

Variables

This section is empty.

Functions

func Status 

func Status(i C.camera_status_t) error

Types

type AvailabilityCallbacks 

type AvailabilityCallbacks interface {
	OnCameraAvailable(id string)
	OnCameraUnavailable(id string)
}

*

  • A listener for camera devices becoming available or unavailable to open. *
  • <p>Cameras become available when they are no longer in use, or when a new
  • removable camera is connected. They become unavailable when some
  • application or service starts using a camera, or when a removable camera
  • is disconnected.</p> *
  • @see ACameraManager_registerAvailabilityCallback

go typedef struct ACameraManager_AvailabilityListener { / Optional application context. go void* context; / Called when a camera becomes available go ACameraManager_AvailabilityCallback onCameraAvailable; / Called when a camera becomes unavailable go ACameraManager_AvailabilityCallback onCameraUnavailable; go } ACameraManager_AvailabilityCallbacks;

type CameraMetadataSection 

type CameraMetadataSection int
const (
	COLOR_CORRECTION  CameraMetadataSection = C.ACAMERA_COLOR_CORRECTION
	CAMERA_CONTROL    CameraMetadataSection = C.ACAMERA_CONTROL
	CAMERA_DEMOSAIC   CameraMetadataSection = C.ACAMERA_DEMOSAIC
	CAMERA_EDGE       CameraMetadataSection = C.ACAMERA_EDGE
	CAMERA_FLASH      CameraMetadataSection = C.ACAMERA_FLASH
	FLASH_INFO        CameraMetadataSection = C.ACAMERA_FLASH_INFO
	HOT_PIXEL         CameraMetadataSection = C.ACAMERA_HOT_PIXEL
	CAMERA_JPEG       CameraMetadataSection = C.ACAMERA_JPEG
	CAMERA_LENS       CameraMetadataSection = C.ACAMERA_LENS
	LENS_INFO         CameraMetadataSection = C.ACAMERA_LENS_INFO
	NOISE_REDUCTION   CameraMetadataSection = C.ACAMERA_NOISE_REDUCTION
	CAMERA_QUIRKS     CameraMetadataSection = C.ACAMERA_QUIRKS
	CAMERA_REQUEST    CameraMetadataSection = C.ACAMERA_REQUEST
	CAMERA_SCALER     CameraMetadataSection = C.ACAMERA_SCALER
	CAMERA_SENSOR     CameraMetadataSection = C.ACAMERA_SENSOR
	SENSOR_INFO       CameraMetadataSection = C.ACAMERA_SENSOR_INFO
	CAMERA_SHADING    CameraMetadataSection = C.ACAMERA_SHADING
	CAMERA_STATISTICS CameraMetadataSection = C.ACAMERA_STATISTICS
	STATISTICS_INFO   CameraMetadataSection = C.ACAMERA_STATISTICS_INFO
	CAMERA_TONEMAP    CameraMetadataSection = C.ACAMERA_TONEMAP
	CAMERA_LED        CameraMetadataSection = C.ACAMERA_LED
	CAMERA_INFO       CameraMetadataSection = C.ACAMERA_INFO
	BLACK_LEVEL       CameraMetadataSection = C.ACAMERA_BLACK_LEVEL
	CAMERA_SYNC       CameraMetadataSection = C.ACAMERA_SYNC
	CAMERA_REPROCESS  CameraMetadataSection = C.ACAMERA_REPROCESS
	CAMERA_DEPTH      CameraMetadataSection = C.ACAMERA_DEPTH
	SECTION_COUNT     CameraMetadataSection = C.ACAMERA_SECTION_COUNT

	CAMERA_VENDOR CameraMetadataSection = C.ACAMERA_VENDOR
)

type CameraMetadataSectionStart 

type CameraMetadataSectionStart int

*

  • Hierarchy positions in enum space.
const (
	COLOR_CORRECTION_START CameraMetadataSectionStart = C.ACAMERA_COLOR_CORRECTION_START
	CONTROL_START          CameraMetadataSectionStart = C.ACAMERA_CONTROL_START
	DEMOSAIC_START         CameraMetadataSectionStart = C.ACAMERA_DEMOSAIC_START
	EDGE_START             CameraMetadataSectionStart = C.ACAMERA_EDGE_START
	FLASH_START            CameraMetadataSectionStart = C.ACAMERA_FLASH_START
	FLASH_INFO_START       CameraMetadataSectionStart = C.ACAMERA_FLASH_INFO_START
	HOT_PIXEL_START        CameraMetadataSectionStart = C.ACAMERA_HOT_PIXEL_START
	JPEG_START             CameraMetadataSectionStart = C.ACAMERA_JPEG_START
	LENS_START             CameraMetadataSectionStart = C.ACAMERA_LENS_START
	LENS_INFO_START        CameraMetadataSectionStart = C.ACAMERA_LENS_INFO_START
	NOISE_REDUCTION_START  CameraMetadataSectionStart = C.ACAMERA_NOISE_REDUCTION_START
	QUIRKS_START           CameraMetadataSectionStart = C.ACAMERA_QUIRKS_START
	REQUEST_START          CameraMetadataSectionStart = C.ACAMERA_REQUEST_START
	SCALER_START           CameraMetadataSectionStart = C.ACAMERA_SCALER_START
	SENSOR_START           CameraMetadataSectionStart = C.ACAMERA_SENSOR_START
	SENSOR_INFO_START      CameraMetadataSectionStart = C.ACAMERA_SENSOR_INFO_START
	SHADING_START          CameraMetadataSectionStart = C.ACAMERA_SHADING_START
	STATISTICS_START       CameraMetadataSectionStart = C.ACAMERA_STATISTICS_START
	STATISTICS_INFO_START  CameraMetadataSectionStart = C.ACAMERA_STATISTICS_INFO_START
	TONEMAP_START          CameraMetadataSectionStart = C.ACAMERA_TONEMAP_START
	LED_START              CameraMetadataSectionStart = C.ACAMERA_LED_START
	INFO_START             CameraMetadataSectionStart = C.ACAMERA_INFO_START
	BLACK_LEVEL_START      CameraMetadataSectionStart = C.ACAMERA_BLACK_LEVEL_START
	SYNC_START             CameraMetadataSectionStart = C.ACAMERA_SYNC_START
	REPROCESS_START        CameraMetadataSectionStart = C.ACAMERA_REPROCESS_START
	DEPTH_START            CameraMetadataSectionStart = C.ACAMERA_DEPTH_START
	VENDOR_START           CameraMetadataSectionStart = C.ACAMERA_VENDOR_START
)

type CaptureFailure 

type CaptureFailure C.ACameraCaptureFailure

*

  • Determine if the image was captured from the camera. *
  • <p>If the image was not captured, no image buffers will be available.
  • If the image was captured, then image buffers may be available.</p> *

go bool wasImageCaptured; go } ACameraCaptureFailure;

func (*CaptureFailure) FrameNumber 

func (f *CaptureFailure) FrameNumber() int64

func (*CaptureFailure) Reason 

func (f *CaptureFailure) Reason() int

func (*CaptureFailure) SequenceId 

func (f *CaptureFailure) SequenceId() int

func (*CaptureFailure) WasImageCaptured 

func (f *CaptureFailure) WasImageCaptured() bool

type CaptureRequest 

type CaptureRequest C.ACaptureRequest

*

  • ACaptureRequest is an opaque type that contains settings and output targets needed to capture
  • a single image from camera device. *
  • <p>ACaptureRequest contains the configuration for the capture hardware (sensor, lens, flash),
  • the processing pipeline, the control algorithms, and the output buffers. Also
  • contains the list of target {@link ANativeWindow}s to send image data to for this
  • capture.</p> *
  • <p>ACaptureRequest is created by {@link ACameraDevice_createCaptureRequest}. *
  • <p>ACaptureRequest is given to {@link ACameraCaptureSession_capture} or
  • {@link ACameraCaptureSession_setRepeatingRequest} to capture images from a camera.</p> *
  • <p>Each request can specify a different subset of target {@link ANativeWindow}s for the
  • camera to send the captured data to. All the {@link ANativeWindow}s used in a request must
  • be part of the {@link ANativeWindow} list given to the last call to
  • {@link ACameraDevice_createCaptureSession}, when the request is submitted to the
  • session.</p> *
  • <p>For example, a request meant for repeating preview might only include the
  • {@link ANativeWindow} for the preview SurfaceView or SurfaceTexture, while a
  • high-resolution still capture would also include a {@link ANativeWindow} from a
  • {@link AImageReader} configured for high-resolution JPEG images.</p> *
  • @see ACameraDevice_createCaptureRequest
  • @see ACameraCaptureSession_capture
  • @see ACameraCaptureSession_setRepeatingRequest

func (*CaptureRequest) AddTarget 

func (request *CaptureRequest) AddTarget(output *OutputTarget) error

*

  • Add an {@link ACameraOutputTarget} object to {@link ACaptureRequest}. *
  • @param request the {@link ACaptureRequest} of interest.
  • @param output the output {@link ACameraOutputTarget} to be added to capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request or output is NULL.</li></ul>

camera_status_t ACaptureRequest_addTarget(ACaptureRequest* request, 

const ACameraOutputTarget* output);

func (*CaptureRequest) Free 

func (request *CaptureRequest) Free()

*

  • Free a {@link ACaptureRequest} structure. *
  • @param request the {@link ACaptureRequest} to be freed.

void ACaptureRequest_free(ACaptureRequest* request);

func (*CaptureRequest) GetAllTags 

func (request *CaptureRequest) GetAllTags() ([]uint32, error)
  • List all the entry tags in input {@link ACaptureRequest}. *
  • @param request the {@link ACaptureRequest} of interest.
  • @param numEntries number of metadata entries in input {@link ACaptureRequest}
  • @param tags the tag values of the metadata entries. Length of tags is returned in numEntries
  • argument. The memory is managed by ACaptureRequest itself and must NOT be free/delete
  • by application. Calling ACaptureRequest_setEntry_* methods will invalidate previous
  • output of ACaptureRequest_getAllTags. Do not access tags after calling
  • ACaptureRequest_setEntry_*. To get new list of tags after updating capture request,
  • application must call ACaptureRequest_getAllTags again. Do NOT access tags after
  • calling ACaptureRequest_free. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request, numEntries or tags is NULL.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>

camera_status_t ACaptureRequest_getAllTags( 

const ACaptureRequest* request, /*out*/int32_t* numTags, /*out*/const uint32_t** tags);

func (*CaptureRequest) GetConstEntry 

func (request *CaptureRequest) GetConstEntry(tag MetadataTag) (*MetadataConstEntry, error)

*

  • Get a metadata entry from input {@link ACaptureRequest}. *
  • <p>The memory of the data field in returned entry is managed by camera framework. Do not
  • attempt to free it.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be get.
  • @param entry the output {@link ACameraMetadata_const_entry} will be filled here if the method
  • call succeeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if metadata or entry is NULL.</li>
  • <li>{@link ACAMERA_ERROR_METADATA_NOT_FOUND} if the capture request does not contain an
  • entry of input tag value.</li></ul>

camera_status_t ACaptureRequest_getConstEntry( 

const ACaptureRequest* request, uint32_t tag, ACameraMetadata_const_entry* entry);

func (*CaptureRequest) RemoveTarget 

func (request *CaptureRequest) RemoveTarget(output *OutputTarget) error

*

  • Remove an {@link ACameraOutputTarget} object from {@link ACaptureRequest}. *
  • <p>This method has no effect if the ACameraOutputTarget does not exist in ACaptureRequest.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param output the output {@link ACameraOutputTarget} to be removed from capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request or output is NULL.</li></ul>

camera_status_t ACaptureRequest_removeTarget(ACaptureRequest* request, 

const ACameraOutputTarget* output);

func (*CaptureRequest) SetEntryF32 

func (request *CaptureRequest) SetEntryF32(tag MetadataTag, data []float32) error

*

  • Set/change a camera capture control entry with float data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not float, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_float( 

ACaptureRequest* request, uint32_t tag, uint32_t count, const float* data);

func (*CaptureRequest) SetEntryF64 

func (request *CaptureRequest) SetEntryF64(tag MetadataTag, data []float64) error

*

  • Set/change a camera capture control entry with double data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not double, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_double( 

ACaptureRequest* request, uint32_t tag, uint32_t count, const double* data);

func (*CaptureRequest) SetEntryI32 

func (request *CaptureRequest) SetEntryI32(tag MetadataTag, data []int32) error

*

  • Set/change a camera capture control entry with signed 32 bits data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not signed 32 bits, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_i32( 

ACaptureRequest* request, uint32_t tag, uint32_t count, const int32_t* data);

func (*CaptureRequest) SetEntryI64 

func (request *CaptureRequest) SetEntryI64(tag MetadataTag, data []int64) error

*

  • Set/change a camera capture control entry with signed 64 bits data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not signed 64 bits, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_i64( 

ACaptureRequest* request, uint32_t tag, uint32_t count, const int64_t* data);

func (*CaptureRequest) SetEntryRational 

func (request *CaptureRequest) SetEntryRational(tag MetadataTag, data []MetadataRational) error

*

  • Set/change a camera capture control entry with rational data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not rational, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_rational( 

ACaptureRequest* request, uint32_t tag, uint32_t count,
const ACameraMetadata_rational* data);

func (*CaptureRequest) SetEntryU8 

func (request *CaptureRequest) SetEntryU8(tag MetadataTag, data []uint8) error

*

  • Set/change a camera capture control entry with unsigned 8 bits data type. *
  • <p>Set count to 0 and data to NULL to remove a tag from the capture request.</p> *
  • @param request the {@link ACaptureRequest} of interest.
  • @param tag the tag value of the camera metadata entry to be set.
  • @param count number of elements to be set in data argument
  • @param data the entries to be set/change in the capture request. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if request is NULL, count is larger than
  • zero while data is NULL, the data type of the tag is not unsigned 8 bits, or
  • the tag is not controllable by application.</li></ul>

camera_status_t ACaptureRequest_setEntry_u8( 

ACaptureRequest* request, uint32_t tag, uint32_t count, const uint8_t* data);

type CaptureSession 

type CaptureSession C.ACameraCaptureSession

*

  • ACameraCaptureSession is an opaque type that manages frame captures of a camera device. *
  • A pointer can be obtained using {@link ACameraDevice_createCaptureSession} method.

func (*CaptureSession) AbortCaptures 

func (session *CaptureSession) AbortCaptures() error

*

  • Discard all captures currently pending and in-progress as fast as possible. *
  • <p>The camera device will discard all of its current work as fast as possible. Some in-flight
  • captures may complete successfully and call
  • {@link ACameraCaptureSession_captureCallbacks#onCaptureCompleted},
  • while others will trigger their {@link ACameraCaptureSession_captureCallbacks#onCaptureFailed}
  • callbacks. If a repeating request list is set, it will be cleared.</p> *
  • <p>This method is the fastest way to switch the camera device to a new session with
  • {@link ACameraDevice_createCaptureSession}, at the cost of discarding in-progress
  • work. It must be called before the new session is created. Once all pending requests are
  • either completed or thrown away, the {@link ACameraCaptureSession_stateCallbacks#onReady}
  • callback will be called, if the session has not been closed. Otherwise, the
  • {@link ACameraCaptureSession_stateCallbacks#onClosed}
  • callback will be fired when a new session is created by the camera device and the previous
  • session is being removed from memory.</p> *
  • <p>Cancelling will introduce at least a brief pause in the stream of data from the camera
  • device, since once the camera device is emptied, the first new request has to make it through
  • the entire camera pipeline before new output buffers are produced.</p> *
  • <p>This means that using ACameraCaptureSession_abortCaptures to simply remove pending requests is
  • not recommended; it's best used for quickly switching output configurations, or for cancelling
  • long in-progress requests (such as a multi-second capture).</p> *
  • @param session the capture session of interest *
  • @return <ul><li>
  • {@link ACAMERA_OK} if the method succeeds. captureSequenceId will be filled
  • if it is not NULL.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if session is NULL.</li>
  • <li>{@link ACAMERA_ERROR_SESSION_CLOSED} if the capture session has been closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons</li></ul>

camera_status_t ACameraCaptureSession_abortCaptures(ACameraCaptureSession* session);

func (*CaptureSession) Capture 

func (session *CaptureSession) Capture(cb interface{},
	requests []*CaptureRequest) (int, error)

*

  • Submit an array of requests to be captured in sequence as a burst in the minimum of time possible. *
  • <p>The burst will be captured in the minimum amount of time possible, and will not be
  • interleaved with requests submitted by other capture or repeat calls.</p> *
  • <p>Each capture produces one {@link ACameraMetadata} as a capture result and image buffers for
  • one or more target {@link ANativeWindow}s. The target ANativeWindows (set with
  • {@link ACaptureRequest_addTarget}) must be a subset of the ANativeWindow provided when
  • this capture session was created.</p> *
  • @param session the capture session of interest
  • @param callbacks the {@link ACameraCaptureSession_captureCallbacks} to be associated this capture
  • sequence. No capture callback will be fired if this is set to NULL.
  • @param numRequests number of requests in requests argument. Must be at least 1.
  • @param requests an array of {@link ACaptureRequest} to be captured. Length must be at least
  • numRequests.
  • @param captureSequenceId the capture sequence ID associated with this capture method invocation
  • will be stored here if this argument is not NULL and the method call succeeds.
  • When this argument is set to NULL, the capture sequence ID will not be returned. *
  • @return <ul><li>
  • {@link ACAMERA_OK} if the method succeeds. captureSequenceId will be filled
  • if it is not NULL.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if session or requests is NULL, or
  • if numRequests < 1</li>
  • <li>{@link ACAMERA_ERROR_SESSION_CLOSED} if the capture session has been closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons</li></ul>

camera_status_t ACameraCaptureSession_capture( 

ACameraCaptureSession* session,
/*optional*/ACameraCaptureSession_captureCallbacks* callbacks,
int numRequests, ACaptureRequest** requests,
/*optional*/int* captureSequenceId);

func (*CaptureSession) Close 

func (session *CaptureSession) Close()

*

  • Close this capture session. *
  • <p>Closing a session frees up the target output Surfaces of the session for reuse with either
  • a new session, or to other APIs that can draw to Surfaces.</p> *
  • <p>Note that creating a new capture session with {@link ACameraDevice_createCaptureSession}
  • will close any existing capture session automatically, and call the older session listener's
  • {@link ACameraCaptureSession_stateCallbacks#onClosed} callback. Using
  • {@link ACameraDevice_createCaptureSession} directly without closing is the recommended approach
  • for quickly switching to a new session, since unchanged target outputs can be reused more
  • efficiently.</p> *
  • <p>After a session is closed and before {@link ACameraCaptureSession_stateCallbacks#onClosed}
  • is called, all methods invoked on the session will return {@link ACAMERA_ERROR_SESSION_CLOSED},
  • and any repeating requests are stopped (as if {@link ACameraCaptureSession_stopRepeating} was
  • called). However, any in-progress capture requests submitted to the session will be completed as
  • normal; once all captures have completed and the session has been torn down,
  • {@link ACameraCaptureSession_stateCallbacks#onClosed} callback will be called and the seesion
  • will be removed from memory.</p> *
  • <p>Closing a session is idempotent; closing more than once has no effect.</p> *
  • @param session the capture session of interest

void ACameraCaptureSession_close(ACameraCaptureSession* session);

func (*CaptureSession) GetDevice 

func (session *CaptureSession) GetDevice() (*Device, error)

*

  • Get the ACameraDevice pointer associated with this capture session in the device argument
  • if the method succeeds. *
  • @param session the capture session of interest
  • @param device the {@link ACameraDevice} associated with session. Will be set to NULL
  • if the session is closed or this method fails.
  • @return <ul><li>
  • {@link ACAMERA_OK} if the method call succeeds. The {@link ACameraDevice}
  • will be stored in device argument</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if session or device is NULL</li>
  • <li>{@link ACAMERA_ERROR_SESSION_CLOSED} if the capture session has been closed</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons</li></ul> *

camera_status_t ACameraCaptureSession_getDevice( 

ACameraCaptureSession* session, /*out*/ACameraDevice** device);

func (*CaptureSession) SetRepeatingRequest 

func (session *CaptureSession) SetRepeatingRequest(requests []*CaptureRequest) error

*

  • Request endlessly repeating capture of a sequence of images by this capture session. *
  • <p>With this method, the camera device will continually capture images,
  • cycling through the settings in the provided list of
  • {@link ACaptureRequest}, at the maximum rate possible.</p> *
  • <p>If a request is submitted through {@link ACameraCaptureSession_capture},
  • the current repetition of the request list will be
  • completed before the higher-priority request is handled. This guarantees
  • that the application always receives a complete repeat burst captured in
  • minimal time, instead of bursts interleaved with higher-priority
  • captures, or incomplete captures.</p> *
  • <p>Repeating burst requests are a simple way for an application to
  • maintain a preview or other continuous stream of frames where each
  • request is different in a predicatable way, without having to continually
  • submit requests through {@link ACameraCaptureSession_capture}.</p> *
  • <p>To stop the repeating capture, call {@link ACameraCaptureSession_stopRepeating}. Any
  • ongoing burst will still be completed, however. Calling
  • {@link ACameraCaptureSession_abortCaptures} will also clear the request.</p> *
  • <p>Calling this method will replace a previously-set repeating requests
  • set up by this method, although any in-progress burst will be completed before the new repeat
  • burst will be used.</p> *
  • @param session the capture session of interest
  • @param callbacks the {@link ACameraCaptureSession_captureCallbacks} to be associated with this
  • capture sequence. No capture callback will be fired if callbacks is set to NULL.
  • @param numRequests number of requests in requests array. Must be at least 1.
  • @param requests an array of {@link ACaptureRequest} to be captured. Length must be at least
  • numRequests.
  • @param captureSequenceId the capture sequence ID associated with this capture method invocation
  • will be stored here if this argument is not NULL and the method call succeeds.
  • When this argument is set to NULL, the capture sequence ID will not be returned. *
  • @return <ul><li>
  • {@link ACAMERA_OK} if the method succeeds. captureSequenceId will be filled
  • if it is not NULL.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if session or requests is NULL, or
  • if numRequests < 1</li>
  • <li>{@link ACAMERA_ERROR_SESSION_CLOSED} if the capture session has been closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons</li></ul>

camera_status_t ACameraCaptureSession_setRepeatingRequest( 

ACameraCaptureSession* session,
/*optional*/ACameraCaptureSession_captureCallbacks* callbacks,
int numRequests, ACaptureRequest** requests,
/*optional*/int* captureSequenceId);

func (*CaptureSession) StopRepeating 

func (session *CaptureSession) StopRepeating() error

*

  • Cancel any ongoing repeating capture set by {@link ACameraCaptureSession_setRepeatingRequest}.
  • Has no effect on requests submitted through {@link ACameraCaptureSession_capture}. *
  • <p>Any currently in-flight captures will still complete, as will any burst that is
  • mid-capture. To ensure that the device has finished processing all of its capture requests
  • and is in ready state, wait for the {@link ACameraCaptureSession_stateCallbacks#onReady} callback
  • after calling this method.</p> *
  • @param session the capture session of interest *
  • @return <ul><li>
  • {@link ACAMERA_OK} if the method succeeds. captureSequenceId will be filled
  • if it is not NULL.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if session is NULL.</li>
  • <li>{@link ACAMERA_ERROR_SESSION_CLOSED} if the capture session has been closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons</li></ul>

camera_status_t ACameraCaptureSession_stopRepeating(ACameraCaptureSession* session);

type CaptureSessionOutput 

type CaptureSessionOutput C.ACaptureSessionOutput

typedef struct ACaptureSessionOutput ACaptureSessionOutput;

func CaptureSessionOutputCreate 

func CaptureSessionOutputCreate(anw *app.Window) (*CaptureSessionOutput, error)

*

  • Create a ACaptureSessionOutput object. *
  • <p>The ACaptureSessionOutput is used in {@link ACaptureSessionOutputContainer_add} method to add
  • an output {@link ANativeWindow} to ACaptureSessionOutputContainer. Use
  • {@link ACaptureSessionOutput_free} to free the object and its memory after application no longer
  • needs the {@link ACaptureSessionOutput}.</p> *
  • @param anw the {@link ANativeWindow} to be associated with the {@link ACaptureSessionOutput}
  • @param output the output {@link ACaptureSessionOutput} will be stored here if the
  • method call succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds. The created container will be
  • filled in the output argument.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if anw or output is NULL.</li></ul> *
  • @see ACaptureSessionOutputContainer_add

camera_status_t ACaptureSessionOutput_create( 

ANativeWindow* anw, /*out*/ACaptureSessionOutput** output);

func (*CaptureSessionOutput) Free 

func (output *CaptureSessionOutput) Free()

*

  • Free a ACaptureSessionOutput object. *
  • @param output the {@link ACaptureSessionOutput} to be freed. *
  • @see ACaptureSessionOutput_create

void ACaptureSessionOutput_free(ACaptureSessionOutput* output);

type CaptureSessionOutputContainer 

type CaptureSessionOutputContainer C.ACaptureSessionOutputContainer

typedef struct ACaptureSessionOutputContainer ACaptureSessionOutputContainer;

func CaptureSessionOutputContainerCreate 

func CaptureSessionOutputContainerCreate() (*CaptureSessionOutputContainer, error)

*

  • Create a capture session output container. *
  • <p>The container is used in {@link ACameraDevice_createCaptureSession} method to create a capture
  • session. Use {@link ACaptureSessionOutputContainer_free} to free the container and its memory
  • after application no longer needs the ACaptureSessionOutputContainer.</p> *
  • @param container the output {@link ACaptureSessionOutputContainer} will be stored here if the
  • method call succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds. The created container will be
  • filled in container argument.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if container is NULL.</li></ul>

camera_status_t ACaptureSessionOutputContainer_create( 

/*out*/ACaptureSessionOutputContainer** container);

func (*CaptureSessionOutputContainer) Add 

func (container *CaptureSessionOutputContainer) Add(output *CaptureSessionOutput) error

*

  • Add an {@link ACaptureSessionOutput} object to {@link ACaptureSessionOutputContainer}. *
  • @param container the {@link ACaptureSessionOutputContainer} of interest.
  • @param output the output {@link ACaptureSessionOutput} to be added to container. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if container or output is NULL.</li></ul>

camera_status_t ACaptureSessionOutputContainer_add( 

ACaptureSessionOutputContainer* container, const ACaptureSessionOutput* output);

func (*CaptureSessionOutputContainer) Free 

func (container *CaptureSessionOutputContainer) Free()

*

  • Free a capture session output container. *
  • @param container the {@link ACaptureSessionOutputContainer} to be freed. *
  • @see ACaptureSessionOutputContainer_create

void ACaptureSessionOutputContainer_free(ACaptureSessionOutputContainer* container);

func (*CaptureSessionOutputContainer) Remove 

func (container *CaptureSessionOutputContainer) Remove(output *CaptureSessionOutput) error

*

  • Remove an {@link ACaptureSessionOutput} object from {@link ACaptureSessionOutputContainer}. *
  • <p>This method has no effect if the ACaptureSessionOutput does not exist in
  • ACaptureSessionOutputContainer.</p> *
  • @param container the {@link ACaptureSessionOutputContainer} of interest.
  • @param output the output {@link ACaptureSessionOutput} to be removed from container. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if container or output is NULL.</li></ul>

camera_status_t ACaptureSessionOutputContainer_remove( 

ACaptureSessionOutputContainer* container, const ACaptureSessionOutput* output);

type CaptureSessionStateCallbacks 

type CaptureSessionStateCallbacks interface {

	/**
	 * This callback is called when the session is closed and deleted from memory.
	 *
	 * <p>A session is closed when {@link ACameraCaptureSession_close} is called, a new session
	 * is created by the parent camera device,
	 * or when the parent camera device is closed (either by the user closing the device,
	 * or due to a camera device disconnection or fatal error).</p>
	 *
	 * <p>Once this callback is called, all access to this ACameraCaptureSession object will cause
	 * a crash.</p>
	 */
	//    ACameraCaptureSession_stateCallback onClosed;
	OnClosed(*CaptureSession)

	/**
	 * This callback is called every time the session has no more capture requests to process.
	 *
	 * <p>This callback will be invoked any time the session finishes processing
	 * all of its active capture requests, and no repeating request or burst is set up.</p>
	 */
	//     ACameraCaptureSession_stateCallback onReady;
	OnReady(*CaptureSession)

	/**
	 * This callback is called when the session starts actively processing capture requests.
	 *
	 * <p>If the session runs out of capture requests to process and calls {@link onReady},
	 * then this callback will be invoked again once new requests are submitted for capture.</p>
	 */
	//     ACameraCaptureSession_stateCallback onActive;
	OnActive(*CaptureSession)

} //ACameraCaptureSession_stateCallbacks;

typedef struct ACameraCaptureSession_stateCallbacks {

type Device 

type Device C.ACameraDevice

*

  • ACameraDevice is opaque type that provides access to a camera device. *
  • A pointer can be obtained using {@link ACameraManager_openCamera} method.

func (*Device) Close 

func (device *Device) Close() error

*

  • Close the connection and free this ACameraDevice synchronously. Access to the ACameraDevice
  • after calling this method will cause a crash. *
  • <p>After this call, all calls to the active ACameraCaptureSession associated to this
  • ACameraDevice will return {@link ACAMERA_ERROR_SESSION_CLOSED} except for calls to
  • {@link ACameraCaptureSession_close}.</p> *
  • <p>This method will stop all repeating captures sent via
  • {@link ACameraCaptureSession_setRepeatingRequest} and block until all capture requests sent via
  • {@link ACameraCaptureSession_capture} is complete. Once the method returns, the camera device
  • will be removed from memory and access to the closed camera device pointer will cause a crash.</p> *
  • @param device the camera device to be closed *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if device is NULL.</li></ul>

camera_status_t ACameraDevice_close(ACameraDevice* device);

func (*Device) CreateCaptureRequest 

func (device *Device) CreateCaptureRequest(templateId DeviceRequestTemplate) (*CaptureRequest, error)

*

  • Create a ACaptureRequest for capturing images, initialized with template
  • for a target use case. *
  • <p>The settings are chosen to be the best options for this camera device,
  • so it is not recommended to reuse the same request for a different camera device.</p> *
  • @param device the camera device of interest
  • @param templateId the type of capture request to be created.
  • See {@link }.
  • @param request the output request will be stored here if the method call succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds. The created capture request will be
  • filled in request argument.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if device or request is NULL, templateId
  • is undefined or camera device does not support requested template.
  • </li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul> *
  • @see TEMPLATE_PREVIEW
  • @see TEMPLATE_RECORD
  • @see TEMPLATE_STILL_CAPTURE
  • @see TEMPLATE_VIDEO_SNAPSHOT
  • @see TEMPLATE_MANUAL

camera_status_t ACameraDevice_createCaptureRequest( 

const ACameraDevice* device, ACameraDevice_request_template templateId,
/*out*/ACaptureRequest** request);

func (*Device) CreateCaptureSession 

func (device *Device) CreateCaptureSession(outputs *CaptureSessionOutputContainer, cb CaptureSessionStateCallbacks) (*CaptureSession, error)

*

  • Create a new camera capture session by providing the target output set of {@link ANativeWindow}
  • to the camera device. *
  • <p>If there is a preexisting session, the previous session will be closed
  • automatically. However, app still needs to call {@link ACameraCaptureSession_close} on previous
  • session. Otherwise the resources held by previous session will NOT be freed.</p> *
  • <p>The active capture session determines the set of potential output {@link ANativeWindow}s for
  • the camera device for each capture request. A given request may use all
  • or only some of the outputs. Once the ACameraCaptureSession is created, requests can be
  • submitted with {@link ACameraCaptureSession_capture} or
  • {@link ACameraCaptureSession_setRepeatingRequest}.</p> *
  • <p>Often the {@link ANativeWindow} used with this method can be obtained from a <a href=
  • "http://developer.android.com/reference/android/view/Surface.html">Surface</a> java object by
  • {@link ANativeWindow_fromSurface} NDK method. Surfaces or ANativeWindow suitable for inclusion as a camera
  • output can be created for various use cases and targets:</p> *
  • <ul> *
  • <li>For drawing to a
  • <a href="http://developer.android.com/reference/android/view/SurfaceView.html">SurfaceView</a>:
  • Once the SurfaceView's Surface is created, set the size
  • of the Surface with
  • <a href="http://developer.android.com/reference/android/view/SurfaceHolder.html#setFixedSize(int, int)">
  • android.view.SurfaceHolder\#setFixedSize</a> to be one of the PRIVATE output sizes
  • returned by {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}
  • and then obtain the Surface by calling <a href=
  • "http://developer.android.com/reference/android/view/SurfaceHolder.html#getSurface()">
  • android.view.SurfaceHolder\#getSurface</a>. If the size is not set by the application, it will
  • be rounded to the nearest supported size less than 1080p, by the camera device.</li> *
  • <li>For accessing through an OpenGL texture via a <a href=
  • "http://developer.android.com/reference/android/graphics/SurfaceTexture.html">SurfaceTexture</a>:
  • Set the size of the SurfaceTexture with <a href=
  • "http://developer.android.com/reference/android/graphics/SurfaceTexture.html#setDefaultBufferSize(int, int)">
  • setDefaultBufferSize</a> to be one of the PRIVATE output sizes
  • returned by {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}
  • before creating a Surface from the SurfaceTexture with <a href=
  • "http://developer.android.com/reference/android/view/Surface.html#Surface(android.graphics.SurfaceTexture)">
  • Surface\#Surface(SurfaceTextrue)</a>. If the size is not set by the application, it will be set to be the
  • smallest supported size less than 1080p, by the camera device.</li> *
  • <li>For recording with <a href=
  • "http://developer.android.com/reference/android/media/MediaCodec.html">
  • MediaCodec</a>: Call
  • <a href=
  • "http://developer.android.com/reference/android/media/MediaCodec.html#createInputSurface()">
  • android.media.MediaCodec\#createInputSurface</a> after configuring
  • the media codec to use one of the PRIVATE output sizes
  • returned by {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}.
  • </li> *
  • <li>For recording with <a href=
  • "http://developer.android.com/reference/android/media/MediaRecorder.html">
  • MediaRecorder</a>: Call
  • <a href="http://developer.android.com/reference/android/media/MediaRecorder.html#getSurface()">
  • android.media.MediaRecorder\#getSurface</a> after configuring the media recorder to use
  • one of the PRIVATE output sizes returned by
  • {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}, or configuring it to use one of the supported
  • <a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">
  • CamcorderProfiles</a>.</li> *
  • <li>For efficient YUV processing with <a href=
  • "http://developer.android.com/reference/android/renderscript/package-summary.html">
  • RenderScript</a>:
  • Create a RenderScript
  • <a href="http://developer.android.com/reference/android/renderscript/Allocation.html">
  • Allocation</a> with a supported YUV
  • type, the IO_INPUT flag, and one of the YUV output sizes returned by
  • {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS},
  • Then obtain the Surface with
  • <a href="http://developer.android.com/reference/android/renderscript/Allocation.html#getSurface()">
  • Allocation#getSurface}</a>.</li> *
  • <li>For access to RAW, uncompressed YUV, or compressed JPEG data in the application: Create an
  • {@link AImageReader} object using the {@link AImageReader_new} method with one of the supported
  • output formats given by {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}. Then obtain a
  • ANativeWindow from it with {@link AImageReader_getWindow}.
  • If the AImageReader size is not set to a supported size, it will be rounded to a supported
  • size less than 1080p by the camera device.
  • </li> *
  • </ul> *
  • <p>The camera device will query each ANativeWindow's size and formats upon this
  • call, so they must be set to a valid setting at this time.</p> *
  • <p>It can take several hundred milliseconds for the session's configuration to complete,
  • since camera hardware may need to be powered on or reconfigured.</p> *
  • <p>If a prior ACameraCaptureSession already exists when this method is called, the previous
  • session will no longer be able to accept new capture requests and will be closed. Any
  • in-progress capture requests made on the prior session will be completed before it's closed.
  • To minimize the transition time,
  • the ACameraCaptureSession_abortCaptures method can be used to discard the remaining
  • requests for the prior capture session before a new one is created. Note that once the new
  • session is created, the old one can no longer have its captures aborted.</p> *
  • <p>Using larger resolution outputs, or more outputs, can result in slower
  • output rate from the device.</p> *
  • <p>Configuring a session with an empty list will close the current session, if
  • any. This can be used to release the current session's target surfaces for another use.</p> *
  • <p>While any of the sizes from {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS} can be used when
  • a single output stream is configured, a given camera device may not be able to support all
  • combination of sizes, formats, and targets when multiple outputs are configured at once. The
  • tables below list the maximum guaranteed resolutions for combinations of streams and targets,
  • given the capabilities of the camera device.</p> *
  • <p>If an application tries to create a session using a set of targets that exceed the limits
  • described in the below tables, one of three possibilities may occur. First, the session may
  • be successfully created and work normally. Second, the session may be successfully created,
  • but the camera device won't meet the frame rate guarantees as described in
  • {@link ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}. Or third, if the output set
  • cannot be used at all, session creation will fail entirely, with
  • {@link ACAMERA_ERROR_STREAM_CONFIGURE_FAIL} being returned.</p> *
  • <p>For the type column `PRIV` refers to output format {@link AIMAGE_FORMAT_PRIVATE},
  • `YUV` refers to output format {@link AIMAGE_FORMAT_YUV_420_888},
  • `JPEG` refers to output format {@link AIMAGE_FORMAT_JPEG},
  • and `RAW` refers to output format {@link AIMAGE_FORMAT_RAW16} * *
  • <p>For the maximum size column, `PREVIEW` refers to the best size match to the
  • device's screen resolution, or to 1080p `(1920x1080)`, whichever is
  • smaller. `RECORD` refers to the camera device's maximum supported recording resolution,
  • as determined by <a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">
  • android.media.CamcorderProfiles</a>. And `MAXIMUM` refers to the
  • camera device's maximum output resolution for that format or target from
  • {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}.</p> *
  • <p>To use these tables, determine the number and the formats/targets of outputs needed, and
  • find the row(s) of the table with those targets. The sizes indicate the maximum set of sizes
  • that can be used; it is guaranteed that for those targets, the listed sizes and anything
  • smaller from the list given by {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS} can be
  • successfully used to create a session. For example, if a row indicates that a 8 megapixel
  • (MP) YUV_420_888 output can be used together with a 2 MP `PRIV` output, then a session
  • can be created with targets `[8 MP YUV, 2 MP PRIV]` or targets `[2 MP YUV, 2 MP PRIV]`;
  • but a session with targets `[8 MP YUV, 4 MP PRIV]`, targets `[4 MP YUV, 4 MP PRIV]`,
  • or targets `[8 MP PRIV, 2 MP YUV]` would not be guaranteed to work, unless
  • some other row of the table lists such a combination.</p> *
  • <p>Legacy devices ({@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL}
  • `== `{@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY}) support at
  • least the following stream combinations: *
  • <table>
  • <tr><th colspan="7">LEGACY-level guaranteed configurations</th></tr>
  • <tr> <th colspan="2" id="rb">Target 1</th> <th colspan="2" id="rb">Target 2</th> <th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr>
  • <tr> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th></tr>
  • <tr> <td>`PRIV`</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>Simple preview, GPU video processing, or no-preview video recording.</td> </tr>
  • <tr> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-viewfinder still image capture.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>In-application video/image processing.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>Standard still imaging.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>In-app processing plus still capture.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td colspan="2" id="rb"></td> <td>Standard recording.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td colspan="2" id="rb"></td> <td>Preview plus in-app processing.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>Still capture plus in-app processing.</td> </tr>
  • </table><br>
  • </p> *
  • <p>Limited-level ({@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL}
  • `== `{@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED}) devices
  • support at least the following stream combinations in addition to those for
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY} devices: *
  • <table>
  • <tr><th colspan="7">LIMITED-level additional guaranteed configurations</th></tr>
  • <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr>
  • <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`RECORD `</td> <td colspan="2" id="rb"></td> <td>High-resolution video recording with preview.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`RECORD `</td> <td colspan="2" id="rb"></td> <td>High-resolution in-app video processing with preview.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`RECORD `</td> <td colspan="2" id="rb"></td> <td>Two-input in-app video processing.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`RECORD `</td> <td>`JPEG`</td><td id="rb">`RECORD `</td> <td>High-resolution recording with video snapshot.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`RECORD `</td> <td>`JPEG`</td><td id="rb">`RECORD `</td> <td>High-resolution in-app processing with video snapshot.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>Two-input in-app processing with still capture.</td> </tr>
  • </table><br>
  • </p> *
  • <p>FULL-level ({@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL}
  • `== `{@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) devices
  • support at least the following stream combinations in addition to those for
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: *
  • <table>
  • <tr><th colspan="7">FULL-level additional guaranteed configurations</th></tr>
  • <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr>
  • <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution GPU processing with preview.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution in-app processing with preview.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution two-input in-app processsing.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>Video recording with maximum-size video snapshot</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`640x480`</td> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td>Standard video recording plus maximum-resolution in-app processing.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`640x480`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td>Preview plus two-input maximum-resolution in-app processing.</td> </tr>
  • </table><br>
  • </p> *
  • <p>RAW-capability ({@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES} includes
  • {@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}) devices additionally support
  • at least the following stream combinations on both
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: *
  • <table>
  • <tr><th colspan="7">RAW-capability additional guaranteed configurations</th></tr>
  • <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr>
  • <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr>
  • <tr> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-preview DNG capture.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>Standard DNG capture.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td colspan="2" id="rb"></td> <td>In-app processing plus DNG capture.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td>Video recording with DNG capture.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td>Preview with in-app processing and DNG capture.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td>Two-input in-app processing plus DNG capture.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td>Still capture with simultaneous JPEG and DNG.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>`RAW `</td><td id="rb">`MAXIMUM`</td> <td>In-app processing with simultaneous JPEG and DNG.</td> </tr>
  • </table><br>
  • </p> *
  • <p>BURST-capability ({@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES} includes
  • {@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE BURST_CAPTURE}) devices
  • support at least the below stream combinations in addition to those for
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices. Note that all
  • FULL-level devices support the BURST capability, and the below list is a strict subset of the
  • list for FULL-level devices, so this table is only relevant for LIMITED-level devices that
  • support the BURST_CAPTURE capability. *
  • <table>
  • <tr><th colspan="5">BURST-capability additional guaranteed configurations</th></tr>
  • <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th rowspan="2">Sample use case(s)</th> </tr>
  • <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`MAXIMUM`</td> <td>Maximum-resolution GPU processing with preview.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td>Maximum-resolution in-app processing with preview.</td> </tr>
  • <tr> <td>`YUV `</td><td id="rb">`PREVIEW`</td> <td>`YUV `</td><td id="rb">`MAXIMUM`</td> <td>Maximum-resolution two-input in-app processsing.</td> </tr>
  • </table><br>
  • </p> *
  • <p>LEVEL-3 ({@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL}
  • `== `{@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_3 LEVEL_3})
  • support at least the following stream combinations in addition to the combinations for
  • {@link ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and for
  • RAW capability ({@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES} includes
  • {@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}): *
  • <table>
  • <tr><th colspan="11">LEVEL-3 additional guaranteed configurations</th></tr>
  • <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr>
  • <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`640x480`</td> <td>`YUV`</td><td id="rb">`MAXIMUM`</td> <td>`RAW`</td><td id="rb">`MAXIMUM`</td> <td>In-app viewfinder analysis with dynamic selection of output format.</td> </tr>
  • <tr> <td>`PRIV`</td><td id="rb">`PREVIEW`</td> <td>`PRIV`</td><td id="rb">`640x480`</td> <td>`JPEG`</td><td id="rb">`MAXIMUM`</td> <td>`RAW`</td><td id="rb">`MAXIMUM`</td> <td>In-app viewfinder analysis with dynamic selection of output format.</td> </tr>
  • </table><br>
  • </p> *
  • <p>Since the capabilities of camera devices vary greatly, a given camera device may support
  • target combinations with sizes outside of these guarantees, but this can only be tested for
  • by attempting to create a session with such targets.</p> *
  • @param device the camera device of interest.
  • @param outputs the {@link ACaptureSessionOutputContainer} describes all output streams.
  • @param callbacks the {@link ACameraCaptureSession_stateCallbacks capture session state callbacks}.
  • @param session the created {@link ACameraCaptureSession} will be filled here if the method call
  • succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds. The created capture session will be
  • filled in session argument.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if any of device, outputs, callbacks or
  • session is NULL.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>

camera_status_t ACameraDevice_createCaptureSession( 

ACameraDevice* device,
const ACaptureSessionOutputContainer*       outputs,
const ACameraCaptureSession_stateCallbacks* callbacks,
/*out*/ACameraCaptureSession** session);

func (*Device) GetId 

func (device *Device) GetId() string

*

  • Return the camera id associated with this camera device. *
  • @param device the camera device to be closed *
  • @return camera ID string. The returned string is managed by framework and should not be
  • delete/free by the application. Also the returned string must not be used after the device
  • has been closed.

const char* ACameraDevice_getId(const ACameraDevice* device);

type DeviceRequestTemplate 

type DeviceRequestTemplate int
const (
	/**
	 * Create a request suitable for a camera preview window. Specifically, this
	 * means that high frame rate is given priority over the highest-quality
	 * post-processing. These requests would normally be used with the
	 * {@link ACameraCaptureSession_setRepeatingRequest} method.
	 * This template is guaranteed to be supported on all camera devices.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_PREVIEW DeviceRequestTemplate = C.TEMPLATE_PREVIEW

	/**
	 * Create a request suitable for still image capture. Specifically, this
	 * means prioritizing image quality over frame rate. These requests would
	 * commonly be used with the {@link ACameraCaptureSession_capture} method.
	 * This template is guaranteed to be supported on all camera devices.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_STILL_CAPTURE DeviceRequestTemplate = C.TEMPLATE_STILL_CAPTURE

	/**
	 * Create a request suitable for video recording. Specifically, this means
	 * that a stable frame rate is used, and post-processing is set for
	 * recording quality. These requests would commonly be used with the
	 * {@link ACameraCaptureSession_setRepeatingRequest} method.
	 * This template is guaranteed to be supported on all camera devices.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_RECORD DeviceRequestTemplate = C.TEMPLATE_RECORD

	/**
	 * Create a request suitable for still image capture while recording
	 * video. Specifically, this means maximizing image quality without
	 * disrupting the ongoing recording. These requests would commonly be used
	 * with the {@link ACameraCaptureSession_capture} method while a request based on
	 * {@link TEMPLATE_RECORD} is is in use with {@link ACameraCaptureSession_setRepeatingRequest}.
	 * This template is guaranteed to be supported on all camera devices.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_VIDEO_SNAPSHOT DeviceRequestTemplate = C.TEMPLATE_VIDEO_SNAPSHOT

	/**
	 * Create a request suitable for zero shutter lag still capture. This means
	 * means maximizing image quality without compromising preview frame rate.
	 * AE/AWB/AF should be on auto mode.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_ZERO_SHUTTER_LAG DeviceRequestTemplate = C.TEMPLATE_ZERO_SHUTTER_LAG

	/**
	 * A basic template for direct application control of capture
	 * parameters. All automatic control is disabled (auto-exposure, auto-white
	 * balance, auto-focus), and post-processing parameters are set to preview
	 * quality. The manual capture parameters (exposure, sensitivity, and so on)
	 * are set to reasonable defaults, but should be overriden by the
	 * application depending on the intended use case.
	 * This template is guaranteed to be supported on camera devices that support the
	 * {@link ACAMERA_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR} capability.
	 *
	 * @see ACameraDevice_createCaptureRequest
	 */
	TEMPLATE_MANUAL DeviceRequestTemplate = C.TEMPLATE_MANUAL
)

type DeviceStateCallbacks 

type DeviceStateCallbacks interface {

	/**
	 * The function is  called when a camera device is no longer available for use.
	 *
	 * <p>Any attempt to call API methods on this ACameraDevice will return
	 * {@link ACAMERA_ERROR_CAMERA_DISCONNECTED}. The disconnection could be due to a
	 * change in security policy or permissions; the physical disconnection
	 * of a removable camera device; or the camera being needed for a
	 * higher-priority camera API client.</p>
	 *
	 * <p>Application should clean up the camera with {@link ACameraDevice_close} after
	 * this happens, as it is not recoverable until the camera can be opened
	 * again.</p>
	 *
	 */
	//     ACameraDevice_StateCallback       onDisconnected;
	OnDisconnected(*Device)

	/**
	 * The function called when a camera device has encountered a serious error.
	 *
	 * <p>This indicates a failure of the camera device or camera service in some way.
	 * Any attempt to call API methods on this ACameraDevice in the future will return
	 * {@link ACAMERA_ERROR_CAMERA_DISCONNECTED}.</p>
	 *
	 * <p>There may still be capture completion or camera stream callbacks that will be called
	 * after this error is received.</p>
	 *
	 * <p>Application should clean up the camera with {@link ACameraDevice_close} after this
	 * happens. Further attempts at recovery are error-code specific.</p>
	 *
	 */
	//     ACameraDevice_ErrorStateCallback  onError;
	OnError(*Device, int)
}

typedef struct ACameraDevice_StateCallbacks {

type Manager 

type Manager C.ACameraManager

*

  • ACameraManager is opaque type that provides access to camera service. *
  • A pointer can be obtained using {@link ACameraManager_create} method.

typedef struct ACameraManager ACameraManager;

func ManagerCreate 

func ManagerCreate() *Manager

*

  • Create ACameraManager instance. *
  • <p>The ACameraManager is responsible for
  • detecting, characterizing, and connecting to {@link ACameraDevice}s.</p> *
  • <p>The caller must call {@link ACameraManager_delete} to free the resources once it is done
  • using the ACameraManager instance.</p> *
  • @return a {@link ACameraManager} instance. *

ACameraManager* ACameraManager_create();

func (*Manager) Delete 

func (manager *Manager) Delete()

*

  • <p>Delete the {@link ACameraManager} instance and free its resources. </p> *
  • @param manager the {@link ACameraManager} instance to be deleted.

void ACameraManager_delete(ACameraManager* manager);

func (*Manager) GetCameraCharacteristics 

func (manager *Manager) GetCameraCharacteristics(cameraId string) (*Metadata, error)

*

  • Query the capabilities of a camera device. These capabilities are
  • immutable for a given camera. *
  • <p>See {@link ACameraMetadata} document and {@link NdkCameraMetadataTags.h} for more details.</p> *
  • <p>The caller must call {@link ACameraMetadata_free} to free the memory of the output
  • characteristics.</p> *
  • @param manager the {@link ACameraManager} of interest.
  • @param cameraId the ID string of the camera device of interest.
  • @param characteristics the output {@link ACameraMetadata} will be filled here if the method call
  • succeeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if manager, cameraId, or characteristics
  • is NULL, or cameraId does not match any camera devices connected.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if connection to camera service fails.</li>
  • <li>{@link ACAMERA_ERROR_NOT_ENOUGH_MEMORY} if allocating memory fails.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>

camera_status_t ACameraManager_getCameraCharacteristics( 

ACameraManager* manager, const char* cameraId,
/*out*/ACameraMetadata** characteristics);

func (*Manager) GetCameraIdList 

func (manager *Manager) GetCameraIdList() ([]string, error)

*

  • Create a list of currently connected camera devices, including
  • cameras that may be in use by other camera API clients. *
  • <p>Non-removable cameras use integers starting at 0 for their
  • identifiers, while removable cameras have a unique identifier for each
  • individual device, even if they are the same model.</p> *
  • <p>ACameraManager_getCameraIdList will allocate and return an {@link ACameraIdList}.
  • The caller must call {@link ACameraManager_deleteCameraIdList} to free the memory</p> *
  • @param manager the {@link ACameraManager} of interest
  • @param cameraIdList the output {@link ACameraIdList} will be filled in here if the method call
  • succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if manager or cameraIdList is NULL.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if connection to camera service fails.</li>
  • <li>{@link ACAMERA_ERROR_NOT_ENOUGH_MEMORY} if allocating memory fails.</li></ul>

camera_status_t ACameraManager_getCameraIdList(ACameraManager* manager, 

/*out*/ACameraIdList** cameraIdList);

func (*Manager) OpenCamera 

func (manager *Manager) OpenCamera(cameraId string,
	callbacks DeviceStateCallbacks) (*Device, error)

*

  • Open a connection to a camera with the given ID. The opened camera device will be
  • returned in the `device` parameter. *
  • <p>Use {@link ACameraManager_getCameraIdList} to get the list of available camera
  • devices. Note that even if an id is listed, open may fail if the device
  • is disconnected between the calls to {@link ACameraManager_getCameraIdList} and
  • {@link ACameraManager_openCamera}, or if a higher-priority camera API client begins using the
  • camera device.</p> *
  • <p>Devices for which the
  • {@link ACameraManager_AvailabilityCallbacks#onCameraUnavailable} callback has been called due to
  • the device being in use by a lower-priority, background camera API client can still potentially
  • be opened by calling this method when the calling camera API client has a higher priority
  • than the current camera API client using this device. In general, if the top, foreground
  • activity is running within your application process, your process will be given the highest
  • priority when accessing the camera, and this method will succeed even if the camera device is
  • in use by another camera API client. Any lower-priority application that loses control of the
  • camera in this way will receive an
  • {@link ACameraDevice_stateCallbacks#onDisconnected} callback.</p> *
  • <p>Once the camera is successfully opened,the ACameraDevice can then be set up
  • for operation by calling {@link ACameraDevice_createCaptureSession} and
  • {@link ACameraDevice_createCaptureRequest}.</p> *
  • <p>If the camera becomes disconnected after this function call returns,
  • {@link ACameraDevice_stateCallbacks#onDisconnected} with a
  • ACameraDevice in the disconnected state will be called.</p> *
  • <p>If the camera runs into error after this function call returns,
  • {@link ACameraDevice_stateCallbacks#onError} with a
  • ACameraDevice in the error state will be called.</p> *
  • @param manager the {@link ACameraManager} of interest.
  • @param cameraId the ID string of the camera device to be opened.
  • @param callback the {@link ACameraDevice_StateCallbacks} associated with the opened camera device.
  • @param device the opened {@link ACameraDevice} will be filled here if the method call succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if manager, cameraId, callback, or device
  • is NULL, or cameraId does not match any camera devices connected.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if connection to camera service fails.</li>
  • <li>{@link ACAMERA_ERROR_NOT_ENOUGH_MEMORY} if allocating memory fails.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_IN_USE} if camera device is being used by a higher
  • priority camera API client.</li>
  • <li>{@link ACAMERA_ERROR_MAX_CAMERA_IN_USE} if the system-wide limit for number of open
  • cameras or camera resources has been reached, and more camera devices cannot be
  • opened until previous instances are closed.</li>
  • <li>{@link ACAMERA_ERROR_CAMERA_DISABLED} if the camera is disabled due to a device
  • policy, and cannot be opened.</li>
  • <li>{@link ACAMERA_ERROR_PERMISSION_DENIED} if the application does not have permission
  • to open camera.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>

camera_status_t ACameraManager_openCamera( 

ACameraManager* manager, const char* cameraId,
ACameraDevice_StateCallbacks* callback,
/*out*/ACameraDevice** device);

func (*Manager) RegisterAvailabilityCallback 

func (manager *Manager) RegisterAvailabilityCallback(cbs AvailabilityCallbacks) error

*

  • Register camera availability callbacks. *
  • <p>onCameraUnavailable will be called whenever a camera device is opened by any camera API client.
  • Other camera API clients may still be able to open such a camera device, evicting the existing
  • client if they have higher priority than the existing client of a camera device.
  • See {@link ACameraManager_openCamera} for more details.</p> *
  • <p>The callbacks will be called on a dedicated thread shared among all ACameraManager
  • instances.</p> *
  • <p>Since this callback will be registered with the camera service, remember to unregister it
  • once it is no longer needed; otherwise the callback will continue to receive events
  • indefinitely and it may prevent other resources from being released. Specifically, the
  • callbacks will be invoked independently of the general activity lifecycle and independently
  • of the state of individual ACameraManager instances.</p> *
  • @param manager the {@link ACameraManager} of interest.
  • @param callback the {@link ACameraManager_AvailabilityCallbacks} to be registered. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if manager or callback is NULL, or
  • {ACameraManager_AvailabilityCallbacks#onCameraAvailable} or
  • {ACameraManager_AvailabilityCallbacks#onCameraUnavailable} is NULL.</li></ul>

camera_status_t ACameraManager_registerAvailabilityCallback( 

ACameraManager* manager, const ACameraManager_AvailabilityCallbacks* callback);

func (*Manager) UnregisterAvailabilityCallback 

func (manager *Manager) UnregisterAvailabilityCallback(cbs AvailabilityCallbacks) error

*

  • Unregister camera availability callbacks. *
  • <p>Removing a callback that isn't registered has no effect.</p> *
  • @param manager the {@link ACameraManager} of interest.
  • @param callback the {@link ACameraManager_AvailabilityCallbacks} to be unregistered. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if callback,
  • {ACameraManager_AvailabilityCallbacks#onCameraAvailable} or
  • {ACameraManager_AvailabilityCallbacks#onCameraUnavailable} is NULL.</li></ul>

camera_status_t ACameraManager_unregisterAvailabilityCallback( 

ACameraManager* manager, const ACameraManager_AvailabilityCallbacks* callback);

type Metadata 

type Metadata C.ACameraMetadata

*

  • ACameraMetadata is opaque type that provides access to read-only camera metadata like camera
  • characteristics (via {@link ACameraManager_getCameraCharacteristics}) or capture results (via
  • {@link ACameraCaptureSession_captureCallback_result}).

typedef struct ACameraMetadata ACameraMetadata;

func (*Metadata) Copy 

func (metadata *Metadata) Copy() *Metadata

*

  • Create a copy of input {@link ACameraMetadata}. *
  • <p>The returned ACameraMetadata must be freed by the application by {@link ACameraMetadata_free}
  • after application is done using it.</p> *
  • @param src the input {@link ACameraMetadata} to be copied. *
  • @return a valid ACameraMetadata pointer or NULL if the input metadata cannot be copied.

ACameraMetadata* ACameraMetadata_copy(const ACameraMetadata* src);

func (*Metadata) Free 

func (metadata *Metadata) Free()

*

  • Free a {@link ACameraMetadata} structure. *
  • @param metadata the {@link ACameraMetadata} to be freed.

void ACameraMetadata_free(ACameraMetadata* metadata);

func (*Metadata) GetAllTags 

func (metadata *Metadata) GetAllTags() ([]MetadataTag, error)

*

  • List all the entry tags in input {@link ACameraMetadata}. *
  • @param metadata the {@link ACameraMetadata} of interest.
  • @param numEntries number of metadata entries in input {@link ACameraMetadata}
  • @param tags the tag values of the metadata entries. Length of tags is returned in numEntries
  • argument. The memory is managed by ACameraMetadata itself and must NOT be free/delete
  • by application. Do NOT access tags after calling ACameraMetadata_free. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if metadata, numEntries or tags is NULL.</li>
  • <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>

camera_status_t ACameraMetadata_getAllTags( 

const ACameraMetadata* metadata, /*out*/int32_t* numEntries, /*out*/const uint32_t** tags);

func (*Metadata) GetConstEntry 

func (metadata *Metadata) GetConstEntry(tag MetadataTag) (*MetadataConstEntry, error)

*

  • Get a metadata entry from an input {@link ACameraMetadata}. *
  • <p>The memory of the data field in the returned entry is managed by camera framework. Do not
  • attempt to free it.</p> *
  • @param metadata the {@link ACameraMetadata} of interest.
  • @param tag the tag value of the camera metadata entry to be get.
  • @param entry the output {@link ACameraMetadata_const_entry} will be filled here if the method
  • call succeeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if metadata or entry is NULL.</li>
  • <li>{@link ACAMERA_ERROR_METADATA_NOT_FOUND} if input metadata does not contain an entry
  • of input tag value.</li></ul>

camera_status_t ACameraMetadata_getConstEntry( 

const ACameraMetadata* metadata, uint32_t tag, /*out*/ACameraMetadata_const_entry* entry);

type MetadataBlack_level_lock 

type MetadataBlack_level_lock int

ACAMERA_BLACK_LEVEL_LOCK

type MetadataColor_correction_aberration_mode 

type MetadataColor_correction_aberration_mode int

ACAMERA_COLOR_CORRECTION_ABERRATION_MODE

type MetadataColor_correction_mode 

type MetadataColor_correction_mode int

ACAMERA_COLOR_CORRECTION_MODE

type MetadataConstEntry 

type MetadataConstEntry C.ACameraMetadata_const_entry

*

  • Pointer to the data held in this metadata entry. *
  • <p>The type field above defines which union member pointer is valid. The count field above
  • defines the length of the data in number of elements.</p>

go union { go const uint8_t *u8; go const int32_t *i32; go const float *f; go const int64_t *i64; go const double *d; go const ACameraMetadata_rational* r; go } data; go } ACameraMetadata_const_entry;

func (*MetadataConstEntry) Count 

func (entry *MetadataConstEntry) Count() int

func (*MetadataConstEntry) Data 

func (entry *MetadataConstEntry) Data() interface{}

func (*MetadataConstEntry) Tag 

func (entry *MetadataConstEntry) Tag() MetadataTag

func (*MetadataConstEntry) Type 

func (entry *MetadataConstEntry) Type() Type

type MetadataControl_ae_antibanding_mode 

type MetadataControl_ae_antibanding_mode int

ACAMERA_CONTROL_AE_ANTIBANDING_MODE

type MetadataControl_ae_lock 

type MetadataControl_ae_lock int

ACAMERA_CONTROL_AE_LOCK

type MetadataControl_ae_lock_available 

type MetadataControl_ae_lock_available int

ACAMERA_CONTROL_AE_LOCK_AVAILABLE

type MetadataControl_ae_precapture_trigger 

type MetadataControl_ae_precapture_trigger int

ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER

type MetadataControl_ae_state 

type MetadataControl_ae_state int

ACAMERA_CONTROL_AE_STATE

type MetadataControl_af_mode 

type MetadataControl_af_mode int

ACAMERA_CONTROL_AF_MODE

type MetadataControl_af_state 

type MetadataControl_af_state int

ACAMERA_CONTROL_AF_STATE

type MetadataControl_awb_lock 

type MetadataControl_awb_lock int

ACAMERA_CONTROL_AWB_LOCK

type MetadataControl_awb_lock_available 

type MetadataControl_awb_lock_available int

ACAMERA_CONTROL_AWB_LOCK_AVAILABLE

type MetadataControl_awb_mode 

type MetadataControl_awb_mode int

ACAMERA_CONTROL_AWB_MODE

type MetadataControl_awb_state 

type MetadataControl_awb_state int

ACAMERA_CONTROL_AWB_STATE

type MetadataControl_capture_intent 

type MetadataControl_capture_intent int

ACAMERA_CONTROL_CAPTURE_INTENT

type MetadataControl_effect_mode 

type MetadataControl_effect_mode int

ACAMERA_CONTROL_EFFECT_MODE

type MetadataControl_enable_zsl 

type MetadataControl_enable_zsl int

ACAMERA_CONTROL_ENABLE_ZSL

type MetadataControl_mode 

type MetadataControl_mode int

ACAMERA_CONTROL_MODE

type MetadataControl_scene_mode 

type MetadataControl_scene_mode int

ACAMERA_CONTROL_SCENE_MODE

type MetadataControl_video_stabilization_mode 

type MetadataControl_video_stabilization_mode int

ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE

type MetadataDepth_available_depth_stream_configurations 

type MetadataDepth_available_depth_stream_configurations int

ACAMERA_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS

type MetadataDepth_depth_is_exclusive 

type MetadataDepth_depth_is_exclusive int

ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE

type MetadataEdge_mode 

type MetadataEdge_mode int

ACAMERA_EDGE_MODE

type MetadataEntry 

type MetadataEntry MetadataConstEntry

*

  • Pointer to the data held in this metadata entry. *
  • <p>The type field above defines which union member pointer is valid. The count field above
  • defines the length of the data in number of elements.</p>

go union { go uint8_t *u8; go int32_t *i32; go float *f; go int64_t *i64; go double *d; go ACameraMetadata_rational* r; go } data; go } ACameraMetadata_entry;

type MetadataEnumAcameraControlAeMode 

type MetadataEnumAcameraControlAeMode int

ACAMERA_CONTROL_AE_MODE

type MetadataEnumAcameraControlAfTrigger 

type MetadataEnumAcameraControlAfTrigger int

ACAMERA_CONTROL_AF_TRIGGER

type MetadataFlash_info_available 

type MetadataFlash_info_available int

ACAMERA_FLASH_INFO_AVAILABLE

type MetadataFlash_mode 

type MetadataFlash_mode int

ACAMERA_FLASH_MODE

type MetadataFlash_state 

type MetadataFlash_state int

ACAMERA_FLASH_STATE

type MetadataHot_pixel_mode 

type MetadataHot_pixel_mode int

ACAMERA_HOT_PIXEL_MODE

type MetadataInfo_supported_hardware_level 

type MetadataInfo_supported_hardware_level int

ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL

type MetadataLens_facing 

type MetadataLens_facing int

ACAMERA_LENS_FACING

type MetadataLens_info_focus_distance_calibration 

type MetadataLens_info_focus_distance_calibration int

ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION

type MetadataLens_optical_stabilization_mode 

type MetadataLens_optical_stabilization_mode int

ACAMERA_LENS_OPTICAL_STABILIZATION_MODE

type MetadataLens_state 

type MetadataLens_state int

ACAMERA_LENS_STATE

type MetadataNoise_reduction_mode 

type MetadataNoise_reduction_mode int

ACAMERA_NOISE_REDUCTION_MODE

type MetadataRational 

type MetadataRational C.ACameraMetadata_rational

*

  • Definition of rational data type in {@link ACameraMetadata}.
typedef struct ACameraMetadata_rational {
   int32_t numerator;
   int32_t denominator;
} ACameraMetadata_rational;

func (*MetadataRational) Denominator 

func (r *MetadataRational) Denominator() uint32

func (*MetadataRational) Numerator 

func (r *MetadataRational) Numerator() uint32

func (*MetadataRational) String 

func (r *MetadataRational) String() string

type MetadataRequest_available_capabilities 

type MetadataRequest_available_capabilities int

ACAMERA_REQUEST_AVAILABLE_CAPABILITIES

type MetadataScaler_available_stream_configurations 

type MetadataScaler_available_stream_configurations int

ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS

type MetadataScaler_cropping_type 

type MetadataScaler_cropping_type int

ACAMERA_SCALER_CROPPING_TYPE

type MetadataSensor_info_color_filter_arrangement 

type MetadataSensor_info_color_filter_arrangement int

ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT

type MetadataSensor_info_lens_shading_applied 

type MetadataSensor_info_lens_shading_applied int

ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED

type MetadataSensor_info_timestamp_source 

type MetadataSensor_info_timestamp_source int

ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE

type MetadataSensor_reference_illuminant1 

type MetadataSensor_reference_illuminant1 int

ACAMERA_SENSOR_REFERENCE_ILLUMINANT1

type MetadataSensor_test_pattern_mode 

type MetadataSensor_test_pattern_mode int

ACAMERA_SENSOR_TEST_PATTERN_MODE

type MetadataShading_mode 

type MetadataShading_mode int

ACAMERA_SHADING_MODE

type MetadataStatistics_face_detect_mode 

type MetadataStatistics_face_detect_mode int

ACAMERA_STATISTICS_FACE_DETECT_MODE

type MetadataStatistics_hot_pixel_map_mode 

type MetadataStatistics_hot_pixel_map_mode int

ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE

type MetadataStatistics_lens_shading_map_mode 

type MetadataStatistics_lens_shading_map_mode int

ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE

type MetadataStatistics_scene_flicker 

type MetadataStatistics_scene_flicker int

ACAMERA_STATISTICS_SCENE_FLICKER

type MetadataSync_frame_number 

type MetadataSync_frame_number int

ACAMERA_SYNC_FRAME_NUMBER

type MetadataSync_max_latency 

type MetadataSync_max_latency int

ACAMERA_SYNC_MAX_LATENCY

type MetadataTag 

type MetadataTag uint32

*

  • Main enum for camera metadata tags.
const (
	/**
	 * <p>The mode control selects how the image data is converted from the
	 * sensor's native color into linear sRGB color.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_color_correction_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When auto-white balance (AWB) is enabled with ACAMERA_CONTROL_AWB_MODE, this
	 * control is overridden by the AWB routine. When AWB is disabled, the
	 * application controls how the color mapping is performed.</p>
	 * <p>We define the expected processing pipeline below. For consistency
	 * across devices, this is always the case with TRANSFORM_MATRIX.</p>
	 * <p>When either FULL or HIGH_QUALITY is used, the camera device may
	 * do additional processing but ACAMERA_COLOR_CORRECTION_GAINS and
	 * ACAMERA_COLOR_CORRECTION_TRANSFORM will still be provided by the
	 * camera device (in the results) and be roughly correct.</p>
	 * <p>Switching to TRANSFORM_MATRIX and using the data provided from
	 * FAST or HIGH_QUALITY will yield a picture with the same white point
	 * as what was produced by the camera device in the earlier frame.</p>
	 * <p>The expected processing pipeline is as follows:</p>
	 * <p><img alt="White balance processing pipeline" src="../images/camera2/metadata/android.colorCorrection.mode/processing_pipeline.png" /></p>
	 * <p>The white balance is encoded by two values, a 4-channel white-balance
	 * gain vector (applied in the Bayer domain), and a 3x3 color transform
	 * matrix (applied after demosaic).</p>
	 * <p>The 4-channel white-balance gains are defined as:</p>
	 * <pre><code>ACAMERA_COLOR_CORRECTION_GAINS = [ R G_even G_odd B ]
	 * </code></pre>
	 * <p>where <code>G_even</code> is the gain for green pixels on even rows of the
	 * output, and <code>G_odd</code> is the gain for green pixels on the odd rows.
	 * These may be identical for a given camera device implementation; if
	 * the camera device does not support a separate gain for even/odd green
	 * channels, it will use the <code>G_even</code> value, and write <code>G_odd</code> equal to
	 * <code>G_even</code> in the output result metadata.</p>
	 * <p>The matrices for color transforms are defined as a 9-entry vector:</p>
	 * <pre><code>ACAMERA_COLOR_CORRECTION_TRANSFORM = [ I0 I1 I2 I3 I4 I5 I6 I7 I8 ]
	 * </code></pre>
	 * <p>which define a transform from input sensor colors, <code>P_in = [ r g b ]</code>,
	 * to output linear sRGB, <code>P_out = [ r' g' b' ]</code>,</p>
	 * <p>with colors as follows:</p>
	 * <pre><code>r' = I0r + I1g + I2b
	 * g' = I3r + I4g + I5b
	 * b' = I6r + I7g + I8b
	 * </code></pre>
	 * <p>Both the input and output value ranges must match. Overflow/underflow
	 * values are clipped to fit within the range.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	COLOR_CORRECTION_MODE MetadataTag = C.ACAMERA_COLOR_CORRECTION_MODE // byte (acamera_metadata_enum_android_color_correction_mode_t)

	/**
	 * <p>A color transform matrix to use to transform
	 * from sensor RGB color space to output linear sRGB color space.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This matrix is either set by the camera device when the request
	 * ACAMERA_COLOR_CORRECTION_MODE is not TRANSFORM_MATRIX, or
	 * directly by the application in the request when the
	 * ACAMERA_COLOR_CORRECTION_MODE is TRANSFORM_MATRIX.</p>
	 * <p>In the latter case, the camera device may round the matrix to account
	 * for precision issues; the final rounded matrix should be reported back
	 * in this matrix result metadata. The transform should keep the magnitude
	 * of the output color values within <code>[0, 1.0]</code> (assuming input color
	 * values is within the normalized range <code>[0, 1.0]</code>), or clipping may occur.</p>
	 * <p>The valid range of each matrix element varies on different devices, but
	 * values within [-1.5, 3.0] are guaranteed not to be clipped.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_MODE
	 */
	COLOR_CORRECTION_TRANSFORM MetadataTag = C.ACAMERA_COLOR_CORRECTION_TRANSFORM // rational[3*3]

	/**
	 * <p>Gains applying to Bayer raw color channels for
	 * white-balance.</p>
	 *
	 * <p>Type: float[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>These per-channel gains are either set by the camera device
	 * when the request ACAMERA_COLOR_CORRECTION_MODE is not
	 * TRANSFORM_MATRIX, or directly by the application in the
	 * request when the ACAMERA_COLOR_CORRECTION_MODE is
	 * TRANSFORM_MATRIX.</p>
	 * <p>The gains in the result metadata are the gains actually
	 * applied by the camera device to the current frame.</p>
	 * <p>The valid range of gains varies on different devices, but gains
	 * between [1.0, 3.0] are guaranteed not to be clipped. Even if a given
	 * device allows gains below 1.0, this is usually not recommended because
	 * this can create color artifacts.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_MODE
	 */
	COLOR_CORRECTION_GAINS MetadataTag = C.ACAMERA_COLOR_CORRECTION_GAINS // float[4]

	/**
	 * <p>Mode of operation for the chromatic aberration correction algorithm.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_color_correction_aberration_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Chromatic (color) aberration is caused by the fact that different wavelengths of light
	 * can not focus on the same point after exiting from the lens. This metadata defines
	 * the high level control of chromatic aberration correction algorithm, which aims to
	 * minimize the chromatic artifacts that may occur along the object boundaries in an
	 * image.</p>
	 * <p>FAST/HIGH_QUALITY both mean that camera device determined aberration
	 * correction will be applied. HIGH_QUALITY mode indicates that the camera device will
	 * use the highest-quality aberration correction algorithms, even if it slows down
	 * capture rate. FAST means the camera device will not slow down capture rate when
	 * applying aberration correction.</p>
	 * <p>LEGACY devices will always be in FAST mode.</p>
	 */
	COLOR_CORRECTION_ABERRATION_MODE MetadataTag = C.ACAMERA_COLOR_CORRECTION_ABERRATION_MODE // byte (acamera_metadata_enum_android_color_correction_aberration_mode_t)

	/**
	 * <p>List of aberration correction modes for ACAMERA_COLOR_CORRECTION_ABERRATION_MODE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_ABERRATION_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This key lists the valid modes for ACAMERA_COLOR_CORRECTION_ABERRATION_MODE.  If no
	 * aberration correction modes are available for a device, this list will solely include
	 * OFF mode. All camera devices will support either OFF or FAST mode.</p>
	 * <p>Camera devices that support the MANUAL_POST_PROCESSING capability will always list
	 * OFF mode. This includes all FULL level devices.</p>
	 * <p>LEGACY devices will always only support FAST mode.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_ABERRATION_MODE
	 */
	COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES MetadataTag = C.ACAMERA_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES // byte[n]

	COLOR_CORRECTION_END MetadataTag = C.ACAMERA_COLOR_CORRECTION_END

	/**
	 * <p>The desired setting for the camera device's auto-exposure
	 * algorithm's antibanding compensation.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_antibanding_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Some kinds of lighting fixtures, such as some fluorescent
	 * lights, flicker at the rate of the power supply frequency
	 * (60Hz or 50Hz, depending on country). While this is
	 * typically not noticeable to a person, it can be visible to
	 * a camera device. If a camera sets its exposure time to the
	 * wrong value, the flicker may become visible in the
	 * viewfinder as flicker or in a final captured image, as a
	 * set of variable-brightness bands across the image.</p>
	 * <p>Therefore, the auto-exposure routines of camera devices
	 * include antibanding routines that ensure that the chosen
	 * exposure value will not cause such banding. The choice of
	 * exposure time depends on the rate of flicker, which the
	 * camera device can detect automatically, or the expected
	 * rate can be selected by the application using this
	 * control.</p>
	 * <p>A given camera device may not support all of the possible
	 * options for the antibanding mode. The
	 * ACAMERA_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES key contains
	 * the available modes for a given camera device.</p>
	 * <p>AUTO mode is the default if it is available on given
	 * camera device. When AUTO mode is not available, the
	 * default will be either 50HZ or 60HZ, and both 50HZ
	 * and 60HZ will be available.</p>
	 * <p>If manual exposure control is enabled (by setting
	 * ACAMERA_CONTROL_AE_MODE or ACAMERA_CONTROL_MODE to OFF),
	 * then this setting has no effect, and the application must
	 * ensure it selects exposure times that do not cause banding
	 * issues. The ACAMERA_STATISTICS_SCENE_FLICKER key can assist
	 * the application in this.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_STATISTICS_SCENE_FLICKER
	 */
	CONTROL_AE_ANTIBANDING_MODE MetadataTag = C.ACAMERA_CONTROL_AE_ANTIBANDING_MODE // byte (acamera_metadata_enum_android_control_ae_antibanding_mode_t)

	/**
	 * <p>Adjustment to auto-exposure (AE) target image
	 * brightness.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The adjustment is measured as a count of steps, with the
	 * step size defined by ACAMERA_CONTROL_AE_COMPENSATION_STEP and the
	 * allowed range by ACAMERA_CONTROL_AE_COMPENSATION_RANGE.</p>
	 * <p>For example, if the exposure value (EV) step is 0.333, '6'
	 * will mean an exposure compensation of +2 EV; -3 will mean an
	 * exposure compensation of -1 EV. One EV represents a doubling
	 * of image brightness. Note that this control will only be
	 * effective if ACAMERA_CONTROL_AE_MODE <code>!=</code> OFF. This control
	 * will take effect even when ACAMERA_CONTROL_AE_LOCK <code>== true</code>.</p>
	 * <p>In the event of exposure compensation value being changed, camera device
	 * may take several frames to reach the newly requested exposure target.
	 * During that time, ACAMERA_CONTROL_AE_STATE field will be in the SEARCHING
	 * state. Once the new exposure target is reached, ACAMERA_CONTROL_AE_STATE will
	 * change from SEARCHING to either CONVERGED, LOCKED (if AE lock is enabled), or
	 * FLASH_REQUIRED (if the scene is too dark for still capture).</p>
	 *
	 * @see ACAMERA_CONTROL_AE_COMPENSATION_RANGE
	 * @see ACAMERA_CONTROL_AE_COMPENSATION_STEP
	 * @see ACAMERA_CONTROL_AE_LOCK
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AE_STATE
	 */
	CONTROL_AE_EXPOSURE_COMPENSATION MetadataTag = C.ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION // int32

	/**
	 * <p>Whether auto-exposure (AE) is currently locked to its latest
	 * calculated values.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_lock_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When set to <code>true</code> (ON), the AE algorithm is locked to its latest parameters,
	 * and will not change exposure settings until the lock is set to <code>false</code> (OFF).</p>
	 * <p>Note that even when AE is locked, the flash may be fired if
	 * the ACAMERA_CONTROL_AE_MODE is ON_AUTO_FLASH /
	 * ON_ALWAYS_FLASH / ON_AUTO_FLASH_REDEYE.</p>
	 * <p>When ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION is changed, even if the AE lock
	 * is ON, the camera device will still adjust its exposure value.</p>
	 * <p>If AE precapture is triggered (see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER)
	 * when AE is already locked, the camera device will not change the exposure time
	 * (ACAMERA_SENSOR_EXPOSURE_TIME) and sensitivity (ACAMERA_SENSOR_SENSITIVITY)
	 * parameters. The flash may be fired if the ACAMERA_CONTROL_AE_MODE
	 * is ON_AUTO_FLASH/ON_AUTO_FLASH_REDEYE and the scene is too dark. If the
	 * ACAMERA_CONTROL_AE_MODE is ON_ALWAYS_FLASH, the scene may become overexposed.
	 * Similarly, AE precapture trigger CANCEL has no effect when AE is already locked.</p>
	 * <p>When an AE precapture sequence is triggered, AE unlock will not be able to unlock
	 * the AE if AE is locked by the camera device internally during precapture metering
	 * sequence In other words, submitting requests with AE unlock has no effect for an
	 * ongoing precapture metering sequence. Otherwise, the precapture metering sequence
	 * will never succeed in a sequence of preview requests where AE lock is always set
	 * to <code>false</code>.</p>
	 * <p>Since the camera device has a pipeline of in-flight requests, the settings that
	 * get locked do not necessarily correspond to the settings that were present in the
	 * latest capture result received from the camera device, since additional captures
	 * and AE updates may have occurred even before the result was sent out. If an
	 * application is switching between automatic and manual control and wishes to eliminate
	 * any flicker during the switch, the following procedure is recommended:</p>
	 * <ol>
	 * <li>Starting in auto-AE mode:</li>
	 * <li>Lock AE</li>
	 * <li>Wait for the first result to be output that has the AE locked</li>
	 * <li>Copy exposure settings from that result into a request, set the request to manual AE</li>
	 * <li>Submit the capture request, proceed to run manual AE as desired.</li>
	 * </ol>
	 * <p>See ACAMERA_CONTROL_AE_STATE for AE lock related state transition details.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_AE_STATE
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_AE_LOCK MetadataTag = C.ACAMERA_CONTROL_AE_LOCK // byte (acamera_metadata_enum_android_control_ae_lock_t)

	/**
	 * <p>The desired mode for the camera device's
	 * auto-exposure routine.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control is only effective if ACAMERA_CONTROL_MODE is
	 * AUTO.</p>
	 * <p>When set to any of the ON modes, the camera device's
	 * auto-exposure routine is enabled, overriding the
	 * application's selected exposure time, sensor sensitivity,
	 * and frame duration (ACAMERA_SENSOR_EXPOSURE_TIME,
	 * ACAMERA_SENSOR_SENSITIVITY, and
	 * ACAMERA_SENSOR_FRAME_DURATION). If one of the FLASH modes
	 * is selected, the camera device's flash unit controls are
	 * also overridden.</p>
	 * <p>The FLASH modes are only available if the camera device
	 * has a flash unit (ACAMERA_FLASH_INFO_AVAILABLE is <code>true</code>).</p>
	 * <p>If flash TORCH mode is desired, this field must be set to
	 * ON or OFF, and ACAMERA_FLASH_MODE set to TORCH.</p>
	 * <p>When set to any of the ON modes, the values chosen by the
	 * camera device auto-exposure routine for the overridden
	 * fields for a given capture will be available in its
	 * CaptureResult.</p>
	 *
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_FLASH_INFO_AVAILABLE
	 * @see ACAMERA_FLASH_MODE
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_AE_MODE MetadataTag = C.ACAMERA_CONTROL_AE_MODE // byte (acamera_metadata_enum_android_control_ae_mode_t)

	/**
	 * <p>List of metering areas to use for auto-exposure adjustment.</p>
	 *
	 * <p>Type: int32[5*area_count]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Not available if android.control.maxRegionsAe is 0.
	 * Otherwise will always be present.</p>
	 * <p>The maximum number of regions supported by the device is determined by the value
	 * of android.control.maxRegionsAe.</p>
	 * <p>The data representation is int[5 * area_count].
	 * Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
	 * The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
	 * ymax.</p>
	 * <p>The coordinate system is based on the active pixel array,
	 * with (0,0) being the top-left pixel in the active pixel array, and
	 * (ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.width - 1,
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.height - 1) being the
	 * bottom-right pixel in the active pixel array.</p>
	 * <p>The weight must be within <code>[0, 1000]</code>, and represents a weight
	 * for every pixel in the area. This means that a large metering area
	 * with the same weight as a smaller area will have more effect in
	 * the metering result. Metering areas can partially overlap and the
	 * camera device will add the weights in the overlap region.</p>
	 * <p>The weights are relative to weights of other exposure metering regions, so if only one
	 * region is used, all non-zero weights will have the same effect. A region with 0
	 * weight is ignored.</p>
	 * <p>If all regions have 0 weight, then no specific metering area needs to be used by the
	 * camera device.</p>
	 * <p>If the metering region is outside the used ACAMERA_SCALER_CROP_REGION returned in
	 * capture result metadata, the camera device will ignore the sections outside the crop
	 * region and output only the intersection rectangle as the metering region in the result
	 * metadata.  If the region is entirely outside the crop region, it will be ignored and
	 * not reported in the result metadata.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	CONTROL_AE_REGIONS MetadataTag = C.ACAMERA_CONTROL_AE_REGIONS // int32[5*area_count]

	/**
	 * <p>Range over which the auto-exposure routine can
	 * adjust the capture frame rate to maintain good
	 * exposure.</p>
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Only constrains auto-exposure (AE) algorithm, not
	 * manual control of ACAMERA_SENSOR_EXPOSURE_TIME and
	 * ACAMERA_SENSOR_FRAME_DURATION.</p>
	 *
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 */
	CONTROL_AE_TARGET_FPS_RANGE MetadataTag = C.ACAMERA_CONTROL_AE_TARGET_FPS_RANGE // int32[2]

	/**
	 * <p>Whether the camera device will trigger a precapture
	 * metering sequence when it processes this request.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_precapture_trigger_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This entry is normally set to IDLE, or is not
	 * included at all in the request settings. When included and
	 * set to START, the camera device will trigger the auto-exposure (AE)
	 * precapture metering sequence.</p>
	 * <p>When set to CANCEL, the camera device will cancel any active
	 * precapture metering trigger, and return to its initial AE state.
	 * If a precapture metering sequence is already completed, and the camera
	 * device has implicitly locked the AE for subsequent still capture, the
	 * CANCEL trigger will unlock the AE and return to its initial AE state.</p>
	 * <p>The precapture sequence should be triggered before starting a
	 * high-quality still capture for final metering decisions to
	 * be made, and for firing pre-capture flash pulses to estimate
	 * scene brightness and required final capture flash power, when
	 * the flash is enabled.</p>
	 * <p>Normally, this entry should be set to START for only a
	 * single request, and the application should wait until the
	 * sequence completes before starting a new one.</p>
	 * <p>When a precapture metering sequence is finished, the camera device
	 * may lock the auto-exposure routine internally to be able to accurately expose the
	 * subsequent still capture image (<code>ACAMERA_CONTROL_CAPTURE_INTENT == STILL_CAPTURE</code>).
	 * For this case, the AE may not resume normal scan if no subsequent still capture is
	 * submitted. To ensure that the AE routine restarts normal scan, the application should
	 * submit a request with <code>ACAMERA_CONTROL_AE_LOCK == true</code>, followed by a request
	 * with <code>ACAMERA_CONTROL_AE_LOCK == false</code>, if the application decides not to submit a
	 * still capture request after the precapture sequence completes. Alternatively, for
	 * API level 23 or newer devices, the CANCEL can be used to unlock the camera device
	 * internally locked AE if the application doesn't submit a still capture request after
	 * the AE precapture trigger. Note that, the CANCEL was added in API level 23, and must not
	 * be used in devices that have earlier API levels.</p>
	 * <p>The exact effect of auto-exposure (AE) precapture trigger
	 * depends on the current AE mode and state; see
	 * ACAMERA_CONTROL_AE_STATE for AE precapture state transition
	 * details.</p>
	 * <p>On LEGACY-level devices, the precapture trigger is not supported;
	 * capturing a high-resolution JPEG image will automatically trigger a
	 * precapture sequence before the high-resolution capture, including
	 * potentially firing a pre-capture flash.</p>
	 * <p>Using the precapture trigger and the auto-focus trigger ACAMERA_CONTROL_AF_TRIGGER
	 * simultaneously is allowed. However, since these triggers often require cooperation between
	 * the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
	 * focus sweep), the camera device may delay acting on a later trigger until the previous
	 * trigger has been fully handled. This may lead to longer intervals between the trigger and
	 * changes to ACAMERA_CONTROL_AE_STATE indicating the start of the precapture sequence, for
	 * example.</p>
	 * <p>If both the precapture and the auto-focus trigger are activated on the same request, then
	 * the camera device will complete them in the optimal order for that device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_LOCK
	 * @see ACAMERA_CONTROL_AE_STATE
	 * @see ACAMERA_CONTROL_AF_TRIGGER
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 */
	CONTROL_AE_PRECAPTURE_TRIGGER MetadataTag = C.ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER // byte (acamera_metadata_enum_android_control_ae_precapture_trigger_t)

	/**
	 * <p>Whether auto-focus (AF) is currently enabled, and what
	 * mode it is set to.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_af_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Only effective if ACAMERA_CONTROL_MODE = AUTO and the lens is not fixed focus
	 * (i.e. <code>ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE &gt; 0</code>). Also note that
	 * when ACAMERA_CONTROL_AE_MODE is OFF, the behavior of AF is device
	 * dependent. It is recommended to lock AF by using ACAMERA_CONTROL_AF_TRIGGER before
	 * setting ACAMERA_CONTROL_AE_MODE to OFF, or set AF mode to OFF when AE is OFF.</p>
	 * <p>If the lens is controlled by the camera device auto-focus algorithm,
	 * the camera device will report the current AF status in ACAMERA_CONTROL_AF_STATE
	 * in result metadata.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AF_STATE
	 * @see ACAMERA_CONTROL_AF_TRIGGER
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	CONTROL_AF_MODE MetadataTag = C.ACAMERA_CONTROL_AF_MODE // byte (acamera_metadata_enum_android_control_af_mode_t)

	/**
	 * <p>List of metering areas to use for auto-focus.</p>
	 *
	 * <p>Type: int32[5*area_count]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Not available if android.control.maxRegionsAf is 0.
	 * Otherwise will always be present.</p>
	 * <p>The maximum number of focus areas supported by the device is determined by the value
	 * of android.control.maxRegionsAf.</p>
	 * <p>The data representation is int[5 * area_count].
	 * Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
	 * The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
	 * ymax.</p>
	 * <p>The coordinate system is based on the active pixel array,
	 * with (0,0) being the top-left pixel in the active pixel array, and
	 * (ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.width - 1,
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.height - 1) being the
	 * bottom-right pixel in the active pixel array.</p>
	 * <p>The weight must be within <code>[0, 1000]</code>, and represents a weight
	 * for every pixel in the area. This means that a large metering area
	 * with the same weight as a smaller area will have more effect in
	 * the metering result. Metering areas can partially overlap and the
	 * camera device will add the weights in the overlap region.</p>
	 * <p>The weights are relative to weights of other metering regions, so if only one region
	 * is used, all non-zero weights will have the same effect. A region with 0 weight is
	 * ignored.</p>
	 * <p>If all regions have 0 weight, then no specific metering area needs to be used by the
	 * camera device.</p>
	 * <p>If the metering region is outside the used ACAMERA_SCALER_CROP_REGION returned in
	 * capture result metadata, the camera device will ignore the sections outside the crop
	 * region and output only the intersection rectangle as the metering region in the result
	 * metadata. If the region is entirely outside the crop region, it will be ignored and
	 * not reported in the result metadata.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	CONTROL_AF_REGIONS MetadataTag = C.ACAMERA_CONTROL_AF_REGIONS // int32[5*area_count]

	/**
	 * <p>Whether the camera device will trigger autofocus for this request.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_af_trigger_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This entry is normally set to IDLE, or is not
	 * included at all in the request settings.</p>
	 * <p>When included and set to START, the camera device will trigger the
	 * autofocus algorithm. If autofocus is disabled, this trigger has no effect.</p>
	 * <p>When set to CANCEL, the camera device will cancel any active trigger,
	 * and return to its initial AF state.</p>
	 * <p>Generally, applications should set this entry to START or CANCEL for only a
	 * single capture, and then return it to IDLE (or not set at all). Specifying
	 * START for multiple captures in a row means restarting the AF operation over
	 * and over again.</p>
	 * <p>See ACAMERA_CONTROL_AF_STATE for what the trigger means for each AF mode.</p>
	 * <p>Using the autofocus trigger and the precapture trigger ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * simultaneously is allowed. However, since these triggers often require cooperation between
	 * the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
	 * focus sweep), the camera device may delay acting on a later trigger until the previous
	 * trigger has been fully handled. This may lead to longer intervals between the trigger and
	 * changes to ACAMERA_CONTROL_AF_STATE, for example.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_AF_STATE
	 */
	CONTROL_AF_TRIGGER MetadataTag = C.ACAMERA_CONTROL_AF_TRIGGER // byte (acamera_metadata_enum_android_control_af_trigger_t)

	/**
	 * <p>Whether auto-white balance (AWB) is currently locked to its
	 * latest calculated values.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_awb_lock_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When set to <code>true</code> (ON), the AWB algorithm is locked to its latest parameters,
	 * and will not change color balance settings until the lock is set to <code>false</code> (OFF).</p>
	 * <p>Since the camera device has a pipeline of in-flight requests, the settings that
	 * get locked do not necessarily correspond to the settings that were present in the
	 * latest capture result received from the camera device, since additional captures
	 * and AWB updates may have occurred even before the result was sent out. If an
	 * application is switching between automatic and manual control and wishes to eliminate
	 * any flicker during the switch, the following procedure is recommended:</p>
	 * <ol>
	 * <li>Starting in auto-AWB mode:</li>
	 * <li>Lock AWB</li>
	 * <li>Wait for the first result to be output that has the AWB locked</li>
	 * <li>Copy AWB settings from that result into a request, set the request to manual AWB</li>
	 * <li>Submit the capture request, proceed to run manual AWB as desired.</li>
	 * </ol>
	 * <p>Note that AWB lock is only meaningful when
	 * ACAMERA_CONTROL_AWB_MODE is in the AUTO mode; in other modes,
	 * AWB is already fixed to a specific setting.</p>
	 * <p>Some LEGACY devices may not support ON; the value is then overridden to OFF.</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	CONTROL_AWB_LOCK MetadataTag = C.ACAMERA_CONTROL_AWB_LOCK // byte (acamera_metadata_enum_android_control_awb_lock_t)

	/**
	 * <p>Whether auto-white balance (AWB) is currently setting the color
	 * transform fields, and what its illumination target
	 * is.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_awb_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control is only effective if ACAMERA_CONTROL_MODE is AUTO.</p>
	 * <p>When set to the ON mode, the camera device's auto-white balance
	 * routine is enabled, overriding the application's selected
	 * ACAMERA_COLOR_CORRECTION_TRANSFORM, ACAMERA_COLOR_CORRECTION_GAINS and
	 * ACAMERA_COLOR_CORRECTION_MODE. Note that when ACAMERA_CONTROL_AE_MODE
	 * is OFF, the behavior of AWB is device dependent. It is recommened to
	 * also set AWB mode to OFF or lock AWB by using ACAMERA_CONTROL_AWB_LOCK before
	 * setting AE mode to OFF.</p>
	 * <p>When set to the OFF mode, the camera device's auto-white balance
	 * routine is disabled. The application manually controls the white
	 * balance by ACAMERA_COLOR_CORRECTION_TRANSFORM, ACAMERA_COLOR_CORRECTION_GAINS
	 * and ACAMERA_COLOR_CORRECTION_MODE.</p>
	 * <p>When set to any other modes, the camera device's auto-white
	 * balance routine is disabled. The camera device uses each
	 * particular illumination target for white balance
	 * adjustment. The application's values for
	 * ACAMERA_COLOR_CORRECTION_TRANSFORM,
	 * ACAMERA_COLOR_CORRECTION_GAINS and
	 * ACAMERA_COLOR_CORRECTION_MODE are ignored.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_MODE
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AWB_LOCK
	 * @see ACAMERA_CONTROL_MODE
	 */
	CONTROL_AWB_MODE MetadataTag = C.ACAMERA_CONTROL_AWB_MODE // byte (acamera_metadata_enum_android_control_awb_mode_t)

	/**
	 * <p>List of metering areas to use for auto-white-balance illuminant
	 * estimation.</p>
	 *
	 * <p>Type: int32[5*area_count]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Not available if android.control.maxRegionsAwb is 0.
	 * Otherwise will always be present.</p>
	 * <p>The maximum number of regions supported by the device is determined by the value
	 * of android.control.maxRegionsAwb.</p>
	 * <p>The data representation is int[5 * area_count].
	 * Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
	 * The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
	 * ymax.</p>
	 * <p>The coordinate system is based on the active pixel array,
	 * with (0,0) being the top-left pixel in the active pixel array, and
	 * (ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.width - 1,
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.height - 1) being the
	 * bottom-right pixel in the active pixel array.</p>
	 * <p>The weight must range from 0 to 1000, and represents a weight
	 * for every pixel in the area. This means that a large metering area
	 * with the same weight as a smaller area will have more effect in
	 * the metering result. Metering areas can partially overlap and the
	 * camera device will add the weights in the overlap region.</p>
	 * <p>The weights are relative to weights of other white balance metering regions, so if
	 * only one region is used, all non-zero weights will have the same effect. A region with
	 * 0 weight is ignored.</p>
	 * <p>If all regions have 0 weight, then no specific metering area needs to be used by the
	 * camera device.</p>
	 * <p>If the metering region is outside the used ACAMERA_SCALER_CROP_REGION returned in
	 * capture result metadata, the camera device will ignore the sections outside the crop
	 * region and output only the intersection rectangle as the metering region in the result
	 * metadata.  If the region is entirely outside the crop region, it will be ignored and
	 * not reported in the result metadata.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	CONTROL_AWB_REGIONS MetadataTag = C.ACAMERA_CONTROL_AWB_REGIONS // int32[5*area_count]

	/**
	 * <p>Information to the camera device 3A (auto-exposure,
	 * auto-focus, auto-white balance) routines about the purpose
	 * of this capture, to help the camera device to decide optimal 3A
	 * strategy.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_capture_intent_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control (except for MANUAL) is only effective if
	 * <code>ACAMERA_CONTROL_MODE != OFF</code> and any 3A routine is active.</p>
	 * <p>ZERO_SHUTTER_LAG will be supported if ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * contains PRIVATE_REPROCESSING or YUV_REPROCESSING. MANUAL will be supported if
	 * ACAMERA_REQUEST_AVAILABLE_CAPABILITIES contains MANUAL_SENSOR. Other intent values are
	 * always supported.</p>
	 *
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	CONTROL_CAPTURE_INTENT MetadataTag = C.ACAMERA_CONTROL_CAPTURE_INTENT // byte (acamera_metadata_enum_android_control_capture_intent_t)

	/**
	 * <p>A special color effect to apply.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_effect_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When this mode is set, a color effect will be applied
	 * to images produced by the camera device. The interpretation
	 * and implementation of these color effects is left to the
	 * implementor of the camera device, and should not be
	 * depended on to be consistent (or present) across all
	 * devices.</p>
	 */
	CONTROL_EFFECT_MODE MetadataTag = C.ACAMERA_CONTROL_EFFECT_MODE // byte (acamera_metadata_enum_android_control_effect_mode_t)

	/**
	 * <p>Overall mode of 3A (auto-exposure, auto-white-balance, auto-focus) control
	 * routines.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This is a top-level 3A control switch. When set to OFF, all 3A control
	 * by the camera device is disabled. The application must set the fields for
	 * capture parameters itself.</p>
	 * <p>When set to AUTO, the individual algorithm controls in
	 * ACAMERA_CONTROL_* are in effect, such as ACAMERA_CONTROL_AF_MODE.</p>
	 * <p>When set to USE_SCENE_MODE, the individual controls in
	 * ACAMERA_CONTROL_* are mostly disabled, and the camera device implements
	 * one of the scene mode settings (such as ACTION, SUNSET, or PARTY)
	 * as it wishes. The camera device scene mode 3A settings are provided by
	 * capture results {@link ACameraMetadata} from
	 * {@link ACameraCaptureSession_captureCallback_result}.</p>
	 * <p>When set to OFF_KEEP_STATE, it is similar to OFF mode, the only difference
	 * is that this frame will not be used by camera device background 3A statistics
	 * update, as if this frame is never captured. This mode can be used in the scenario
	 * where the application doesn't want a 3A manual control capture to affect
	 * the subsequent auto 3A capture results.</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 */
	CONTROL_MODE MetadataTag = C.ACAMERA_CONTROL_MODE // byte (acamera_metadata_enum_android_control_mode_t)

	/**
	 * <p>Control for which scene mode is currently active.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_scene_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Scene modes are custom camera modes optimized for a certain set of conditions and
	 * capture settings.</p>
	 * <p>This is the mode that that is active when
	 * <code>ACAMERA_CONTROL_MODE == USE_SCENE_MODE</code>. Aside from FACE_PRIORITY, these modes will
	 * disable ACAMERA_CONTROL_AE_MODE, ACAMERA_CONTROL_AWB_MODE, and ACAMERA_CONTROL_AF_MODE
	 * while in use.</p>
	 * <p>The interpretation and implementation of these scene modes is left
	 * to the implementor of the camera device. Their behavior will not be
	 * consistent across all devices, and any given device may only implement
	 * a subset of these modes.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_CONTROL_MODE
	 */
	CONTROL_SCENE_MODE MetadataTag = C.ACAMERA_CONTROL_SCENE_MODE // byte (acamera_metadata_enum_android_control_scene_mode_t)

	/**
	 * <p>Whether video stabilization is
	 * active.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_video_stabilization_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Video stabilization automatically warps images from
	 * the camera in order to stabilize motion between consecutive frames.</p>
	 * <p>If enabled, video stabilization can modify the
	 * ACAMERA_SCALER_CROP_REGION to keep the video stream stabilized.</p>
	 * <p>Switching between different video stabilization modes may take several
	 * frames to initialize, the camera device will report the current mode
	 * in capture result metadata. For example, When "ON" mode is requested,
	 * the video stabilization modes in the first several capture results may
	 * still be "OFF", and it will become "ON" when the initialization is
	 * done.</p>
	 * <p>In addition, not all recording sizes or frame rates may be supported for
	 * stabilization by a device that reports stabilization support. It is guaranteed
	 * that an output targeting a MediaRecorder or MediaCodec will be stabilized if
	 * the recording resolution is less than or equal to 1920 x 1080 (width less than
	 * or equal to 1920, height less than or equal to 1080), and the recording
	 * frame rate is less than or equal to 30fps.  At other sizes, the CaptureResult
	 * ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE field will return
	 * OFF if the recording output is not stabilized, or if there are no output
	 * Surface types that can be stabilized.</p>
	 * <p>If a camera device supports both this mode and OIS
	 * (ACAMERA_LENS_OPTICAL_STABILIZATION_MODE), turning both modes on may
	 * produce undesirable interaction, so it is recommended not to enable
	 * both at the same time.</p>
	 *
	 * @see ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE
	 * @see ACAMERA_LENS_OPTICAL_STABILIZATION_MODE
	 * @see ACAMERA_SCALER_CROP_REGION
	 */
	CONTROL_VIDEO_STABILIZATION_MODE MetadataTag = C.ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE // byte (acamera_metadata_enum_android_control_video_stabilization_mode_t)

	/**
	 * <p>List of auto-exposure antibanding modes for ACAMERA_CONTROL_AE_ANTIBANDING_MODE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_ANTIBANDING_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Not all of the auto-exposure anti-banding modes may be
	 * supported by a given camera device. This field lists the
	 * valid anti-banding modes that the application may request
	 * for this camera device with the
	 * ACAMERA_CONTROL_AE_ANTIBANDING_MODE control.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_ANTIBANDING_MODE
	 */
	CONTROL_AE_AVAILABLE_ANTIBANDING_MODES MetadataTag = C.ACAMERA_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES // byte[n]

	/**
	 * <p>List of auto-exposure modes for ACAMERA_CONTROL_AE_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Not all the auto-exposure modes may be supported by a
	 * given camera device, especially if no flash unit is
	 * available. This entry lists the valid modes for
	 * ACAMERA_CONTROL_AE_MODE for this camera device.</p>
	 * <p>All camera devices support ON, and all camera devices with flash
	 * units support ON_AUTO_FLASH and ON_ALWAYS_FLASH.</p>
	 * <p>FULL mode camera devices always support OFF mode,
	 * which enables application control of camera exposure time,
	 * sensitivity, and frame duration.</p>
	 * <p>LEGACY mode camera devices never support OFF mode.
	 * LIMITED mode devices support OFF if they support the MANUAL_SENSOR
	 * capability.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 */
	CONTROL_AE_AVAILABLE_MODES MetadataTag = C.ACAMERA_CONTROL_AE_AVAILABLE_MODES // byte[n]

	/**
	 * <p>List of frame rate ranges for ACAMERA_CONTROL_AE_TARGET_FPS_RANGE supported by
	 * this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_TARGET_FPS_RANGE
	 *
	 * <p>Type: int32[2*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>For devices at the LEGACY level or above:</p>
	 * <ul>
	 * <li>
	 * <p>For constant-framerate recording, for each normal
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html">CamcorderProfile</a>, that is, a
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html">CamcorderProfile</a> that has
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html#quality">quality</a>
	 * in the range [
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html#QUALITY_LOW">QUALITY_LOW</a>,
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html#QUALITY_2160P">QUALITY_2160P</a>],
	 * if the profile is supported by the device and has
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html#videoFrameRate">videoFrameRate</a>
	 * <code>x</code>, this list will always include (<code>x</code>,<code>x</code>).</p>
	 * </li>
	 * <li>
	 * <p>Also, a camera device must either not support any
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html">CamcorderProfile</a>,
	 * or support at least one
	 * normal <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html">CamcorderProfile</a>
	 * that has
	 * <a href="https://developer.android.com/reference/android/media/CamcorderProfile.html#videoFrameRate">videoFrameRate</a> <code>x</code> &gt;= 24.</p>
	 * </li>
	 * </ul>
	 * <p>For devices at the LIMITED level or above:</p>
	 * <ul>
	 * <li>For YUV_420_888 burst capture use case, this list will always include (<code>min</code>, <code>max</code>)
	 * and (<code>max</code>, <code>max</code>) where <code>min</code> &lt;= 15 and <code>max</code> = the maximum output frame rate of the
	 * maximum YUV_420_888 output size.</li>
	 * </ul>
	 */
	CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES MetadataTag = C.ACAMERA_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES // int32[2*n]

	/**
	 * <p>Maximum and minimum exposure compensation values for
	 * ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION, in counts of ACAMERA_CONTROL_AE_COMPENSATION_STEP,
	 * that are supported by this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_COMPENSATION_STEP
	 * @see ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	CONTROL_AE_COMPENSATION_RANGE MetadataTag = C.ACAMERA_CONTROL_AE_COMPENSATION_RANGE // int32[2]

	/**
	 * <p>Smallest step by which the exposure compensation
	 * can be changed.</p>
	 *
	 * <p>Type: rational</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This is the unit for ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION. For example, if this key has
	 * a value of <code>1/2</code>, then a setting of <code>-2</code> for ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION means
	 * that the target EV offset for the auto-exposure routine is -1 EV.</p>
	 * <p>One unit of EV compensation changes the brightness of the captured image by a factor
	 * of two. +1 EV doubles the image brightness, while -1 EV halves the image brightness.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_EXPOSURE_COMPENSATION
	 */
	CONTROL_AE_COMPENSATION_STEP MetadataTag = C.ACAMERA_CONTROL_AE_COMPENSATION_STEP // rational

	/**
	 * <p>List of auto-focus (AF) modes for ACAMERA_CONTROL_AF_MODE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Not all the auto-focus modes may be supported by a
	 * given camera device. This entry lists the valid modes for
	 * ACAMERA_CONTROL_AF_MODE for this camera device.</p>
	 * <p>All LIMITED and FULL mode camera devices will support OFF mode, and all
	 * camera devices with adjustable focuser units
	 * (<code>ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE &gt; 0</code>) will support AUTO mode.</p>
	 * <p>LEGACY devices will support OFF mode only if they support
	 * focusing to infinity (by also setting ACAMERA_LENS_FOCUS_DISTANCE to
	 * <code>0.0f</code>).</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	CONTROL_AF_AVAILABLE_MODES MetadataTag = C.ACAMERA_CONTROL_AF_AVAILABLE_MODES // byte[n]

	/**
	 * <p>List of color effects for ACAMERA_CONTROL_EFFECT_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_CONTROL_EFFECT_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This list contains the color effect modes that can be applied to
	 * images produced by the camera device.
	 * Implementations are not expected to be consistent across all devices.
	 * If no color effect modes are available for a device, this will only list
	 * OFF.</p>
	 * <p>A color effect will only be applied if
	 * ACAMERA_CONTROL_MODE != OFF.  OFF is always included in this list.</p>
	 * <p>This control has no effect on the operation of other control routines such
	 * as auto-exposure, white balance, or focus.</p>
	 *
	 * @see ACAMERA_CONTROL_MODE
	 */
	CONTROL_AVAILABLE_EFFECTS MetadataTag = C.ACAMERA_CONTROL_AVAILABLE_EFFECTS // byte[n]

	/**
	 * <p>List of scene modes for ACAMERA_CONTROL_SCENE_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_CONTROL_SCENE_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This list contains scene modes that can be set for the camera device.
	 * Only scene modes that have been fully implemented for the
	 * camera device may be included here. Implementations are not expected
	 * to be consistent across all devices.</p>
	 * <p>If no scene modes are supported by the camera device, this
	 * will be set to DISABLED. Otherwise DISABLED will not be listed.</p>
	 * <p>FACE_PRIORITY is always listed if face detection is
	 * supported (i.e.<code>ACAMERA_STATISTICS_INFO_MAX_FACE_COUNT &gt;
	 * 0</code>).</p>
	 *
	 * @see ACAMERA_STATISTICS_INFO_MAX_FACE_COUNT
	 */
	CONTROL_AVAILABLE_SCENE_MODES MetadataTag = C.ACAMERA_CONTROL_AVAILABLE_SCENE_MODES // byte[n]

	/**
	 * <p>List of video stabilization modes for ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE
	 * that are supported by this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>OFF will always be listed.</p>
	 */
	CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES MetadataTag = C.ACAMERA_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES // byte[n]

	/**
	 * <p>List of auto-white-balance modes for ACAMERA_CONTROL_AWB_MODE that are supported by this
	 * camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Not all the auto-white-balance modes may be supported by a
	 * given camera device. This entry lists the valid modes for
	 * ACAMERA_CONTROL_AWB_MODE for this camera device.</p>
	 * <p>All camera devices will support ON mode.</p>
	 * <p>Camera devices that support the MANUAL_POST_PROCESSING capability will always support OFF
	 * mode, which enables application control of white balance, by using
	 * ACAMERA_COLOR_CORRECTION_TRANSFORM and ACAMERA_COLOR_CORRECTION_GAINS(ACAMERA_COLOR_CORRECTION_MODE must be set to TRANSFORM_MATRIX). This includes all FULL
	 * mode camera devices.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_GAINS
	 * @see ACAMERA_COLOR_CORRECTION_MODE
	 * @see ACAMERA_COLOR_CORRECTION_TRANSFORM
	 * @see ACAMERA_CONTROL_AWB_MODE
	 */
	CONTROL_AWB_AVAILABLE_MODES MetadataTag = C.ACAMERA_CONTROL_AWB_AVAILABLE_MODES // byte[n]

	/**
	 * <p>List of the maximum number of regions that can be used for metering in
	 * auto-exposure (AE), auto-white balance (AWB), and auto-focus (AF);
	 * this corresponds to the the maximum number of elements in
	 * ACAMERA_CONTROL_AE_REGIONS, ACAMERA_CONTROL_AWB_REGIONS,
	 * and ACAMERA_CONTROL_AF_REGIONS.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_REGIONS
	 * @see ACAMERA_CONTROL_AF_REGIONS
	 * @see ACAMERA_CONTROL_AWB_REGIONS
	 *
	 * <p>Type: int32[3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	CONTROL_MAX_REGIONS MetadataTag = C.ACAMERA_CONTROL_MAX_REGIONS // int32[3]

	/**
	 * <p>Current state of the auto-exposure (AE) algorithm.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_state_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Switching between or enabling AE modes (ACAMERA_CONTROL_AE_MODE) always
	 * resets the AE state to INACTIVE. Similarly, switching between ACAMERA_CONTROL_MODE,
	 * or ACAMERA_CONTROL_SCENE_MODE if <code>ACAMERA_CONTROL_MODE == USE_SCENE_MODE</code> resets all
	 * the algorithm states to INACTIVE.</p>
	 * <p>The camera device can do several state transitions between two results, if it is
	 * allowed by the state transition table. For example: INACTIVE may never actually be
	 * seen in a result.</p>
	 * <p>The state in the result is the state for this image (in sync with this image): if
	 * AE state becomes CONVERGED, then the image data associated with this result should
	 * be good to use.</p>
	 * <p>Below are state transition tables for different AE modes.</p>
	 * <p>State       | Transition Cause | New State | Notes
	 * :------------:|:----------------:|:---------:|:-----------------------:
	 * INACTIVE      |                  | INACTIVE  | Camera device auto exposure algorithm is disabled</p>
	 * <p>When ACAMERA_CONTROL_AE_MODE is AE_MODE_ON_*:</p>
	 * <p>State        | Transition Cause                             | New State      | Notes
	 * :-------------:|:--------------------------------------------:|:--------------:|:-----------------:
	 * INACTIVE       | Camera device initiates AE scan              | SEARCHING      | Values changing
	 * INACTIVE       | ACAMERA_CONTROL_AE_LOCK is ON                 | LOCKED         | Values locked
	 * SEARCHING      | Camera device finishes AE scan               | CONVERGED      | Good values, not changing
	 * SEARCHING      | Camera device finishes AE scan               | FLASH_REQUIRED | Converged but too dark w/o flash
	 * SEARCHING      | ACAMERA_CONTROL_AE_LOCK is ON                 | LOCKED         | Values locked
	 * CONVERGED      | Camera device initiates AE scan              | SEARCHING      | Values changing
	 * CONVERGED      | ACAMERA_CONTROL_AE_LOCK is ON                 | LOCKED         | Values locked
	 * FLASH_REQUIRED | Camera device initiates AE scan              | SEARCHING      | Values changing
	 * FLASH_REQUIRED | ACAMERA_CONTROL_AE_LOCK is ON                 | LOCKED         | Values locked
	 * LOCKED         | ACAMERA_CONTROL_AE_LOCK is OFF                | SEARCHING      | Values not good after unlock
	 * LOCKED         | ACAMERA_CONTROL_AE_LOCK is OFF                | CONVERGED      | Values good after unlock
	 * LOCKED         | ACAMERA_CONTROL_AE_LOCK is OFF                | FLASH_REQUIRED | Exposure good, but too dark
	 * PRECAPTURE     | Sequence done. ACAMERA_CONTROL_AE_LOCK is OFF | CONVERGED      | Ready for high-quality capture
	 * PRECAPTURE     | Sequence done. ACAMERA_CONTROL_AE_LOCK is ON  | LOCKED         | Ready for high-quality capture
	 * LOCKED         | aeLock is ON and aePrecaptureTrigger is START | LOCKED        | Precapture trigger is ignored when AE is already locked
	 * LOCKED         | aeLock is ON and aePrecaptureTrigger is CANCEL| LOCKED        | Precapture trigger is ignored when AE is already locked
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is START | PRECAPTURE     | Start AE precapture metering sequence
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is CANCEL| INACTIVE       | Currently active precapture metering sequence is canceled</p>
	 * <p>For the above table, the camera device may skip reporting any state changes that happen
	 * without application intervention (i.e. mode switch, trigger, locking). Any state that
	 * can be skipped in that manner is called a transient state.</p>
	 * <p>For example, for above AE modes (AE_MODE_ON_*), in addition to the state transitions
	 * listed in above table, it is also legal for the camera device to skip one or more
	 * transient states between two results. See below table for examples:</p>
	 * <p>State        | Transition Cause                                            | New State      | Notes
	 * :-------------:|:-----------------------------------------------------------:|:--------------:|:-----------------:
	 * INACTIVE       | Camera device finished AE scan                              | CONVERGED      | Values are already good, transient states are skipped by camera device.
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is START, sequence done | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence, transient states are skipped by camera device.
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is START, sequence done | CONVERGED      | Converged after a precapture sequence, transient states are skipped by camera device.
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is CANCEL, converged    | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence is canceled, transient states are skipped by camera device.
	 * Any state (excluding LOCKED) | ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER is CANCEL, converged    | CONVERGED      | Converged after a precapture sequenceis canceled, transient states are skipped by camera device.
	 * CONVERGED      | Camera device finished AE scan                              | FLASH_REQUIRED | Converged but too dark w/o flash after a new scan, transient states are skipped by camera device.
	 * FLASH_REQUIRED | Camera device finished AE scan                              | CONVERGED      | Converged after a new scan, transient states are skipped by camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_LOCK
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_CONTROL_SCENE_MODE
	 */
	CONTROL_AE_STATE MetadataTag = C.ACAMERA_CONTROL_AE_STATE // byte (acamera_metadata_enum_android_control_ae_state_t)

	/**
	 * <p>Current state of auto-focus (AF) algorithm.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_af_state_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Switching between or enabling AF modes (ACAMERA_CONTROL_AF_MODE) always
	 * resets the AF state to INACTIVE. Similarly, switching between ACAMERA_CONTROL_MODE,
	 * or ACAMERA_CONTROL_SCENE_MODE if <code>ACAMERA_CONTROL_MODE == USE_SCENE_MODE</code> resets all
	 * the algorithm states to INACTIVE.</p>
	 * <p>The camera device can do several state transitions between two results, if it is
	 * allowed by the state transition table. For example: INACTIVE may never actually be
	 * seen in a result.</p>
	 * <p>The state in the result is the state for this image (in sync with this image): if
	 * AF state becomes FOCUSED, then the image data associated with this result should
	 * be sharp.</p>
	 * <p>Below are state transition tables for different AF modes.</p>
	 * <p>When ACAMERA_CONTROL_AF_MODE is AF_MODE_OFF or AF_MODE_EDOF:</p>
	 * <p>State       | Transition Cause | New State | Notes
	 * :------------:|:----------------:|:---------:|:-----------:
	 * INACTIVE      |                  | INACTIVE  | Never changes</p>
	 * <p>When ACAMERA_CONTROL_AF_MODE is AF_MODE_AUTO or AF_MODE_MACRO:</p>
	 * <p>State            | Transition Cause | New State          | Notes
	 * :-----------------:|:----------------:|:------------------:|:--------------:
	 * INACTIVE           | AF_TRIGGER       | ACTIVE_SCAN        | Start AF sweep, Lens now moving
	 * ACTIVE_SCAN        | AF sweep done    | FOCUSED_LOCKED     | Focused, Lens now locked
	 * ACTIVE_SCAN        | AF sweep done    | NOT_FOCUSED_LOCKED | Not focused, Lens now locked
	 * ACTIVE_SCAN        | AF_CANCEL        | INACTIVE           | Cancel/reset AF, Lens now locked
	 * FOCUSED_LOCKED     | AF_CANCEL        | INACTIVE           | Cancel/reset AF
	 * FOCUSED_LOCKED     | AF_TRIGGER       | ACTIVE_SCAN        | Start new sweep, Lens now moving
	 * NOT_FOCUSED_LOCKED | AF_CANCEL        | INACTIVE           | Cancel/reset AF
	 * NOT_FOCUSED_LOCKED | AF_TRIGGER       | ACTIVE_SCAN        | Start new sweep, Lens now moving
	 * Any state          | Mode change      | INACTIVE           |</p>
	 * <p>For the above table, the camera device may skip reporting any state changes that happen
	 * without application intervention (i.e. mode switch, trigger, locking). Any state that
	 * can be skipped in that manner is called a transient state.</p>
	 * <p>For example, for these AF modes (AF_MODE_AUTO and AF_MODE_MACRO), in addition to the
	 * state transitions listed in above table, it is also legal for the camera device to skip
	 * one or more transient states between two results. See below table for examples:</p>
	 * <p>State            | Transition Cause | New State          | Notes
	 * :-----------------:|:----------------:|:------------------:|:--------------:
	 * INACTIVE           | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is already good or good after a scan, lens is now locked.
	 * INACTIVE           | AF_TRIGGER       | NOT_FOCUSED_LOCKED | Focus failed after a scan, lens is now locked.
	 * FOCUSED_LOCKED     | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is already good or good after a scan, lens is now locked.
	 * NOT_FOCUSED_LOCKED | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is good after a scan, lens is not locked.</p>
	 * <p>When ACAMERA_CONTROL_AF_MODE is AF_MODE_CONTINUOUS_VIDEO:</p>
	 * <p>State            | Transition Cause                    | New State          | Notes
	 * :-----------------:|:-----------------------------------:|:------------------:|:--------------:
	 * INACTIVE           | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * INACTIVE           | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
	 * PASSIVE_SCAN       | Camera device completes current scan| PASSIVE_FOCUSED    | End AF scan, Lens now locked
	 * PASSIVE_SCAN       | Camera device fails current scan    | PASSIVE_UNFOCUSED  | End AF scan, Lens now locked
	 * PASSIVE_SCAN       | AF_TRIGGER                          | FOCUSED_LOCKED     | Immediate transition, if focus is good. Lens now locked
	 * PASSIVE_SCAN       | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | Immediate transition, if focus is bad. Lens now locked
	 * PASSIVE_SCAN       | AF_CANCEL                           | INACTIVE           | Reset lens position, Lens now locked
	 * PASSIVE_FOCUSED    | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * PASSIVE_UNFOCUSED  | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * PASSIVE_FOCUSED    | AF_TRIGGER                          | FOCUSED_LOCKED     | Immediate transition, lens now locked
	 * PASSIVE_UNFOCUSED  | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | Immediate transition, lens now locked
	 * FOCUSED_LOCKED     | AF_TRIGGER                          | FOCUSED_LOCKED     | No effect
	 * FOCUSED_LOCKED     | AF_CANCEL                           | INACTIVE           | Restart AF scan
	 * NOT_FOCUSED_LOCKED | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | No effect
	 * NOT_FOCUSED_LOCKED | AF_CANCEL                           | INACTIVE           | Restart AF scan</p>
	 * <p>When ACAMERA_CONTROL_AF_MODE is AF_MODE_CONTINUOUS_PICTURE:</p>
	 * <p>State            | Transition Cause                     | New State          | Notes
	 * :-----------------:|:------------------------------------:|:------------------:|:--------------:
	 * INACTIVE           | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * INACTIVE           | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
	 * PASSIVE_SCAN       | Camera device completes current scan | PASSIVE_FOCUSED    | End AF scan, Lens now locked
	 * PASSIVE_SCAN       | Camera device fails current scan     | PASSIVE_UNFOCUSED  | End AF scan, Lens now locked
	 * PASSIVE_SCAN       | AF_TRIGGER                           | FOCUSED_LOCKED     | Eventual transition once the focus is good. Lens now locked
	 * PASSIVE_SCAN       | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | Eventual transition if cannot find focus. Lens now locked
	 * PASSIVE_SCAN       | AF_CANCEL                            | INACTIVE           | Reset lens position, Lens now locked
	 * PASSIVE_FOCUSED    | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * PASSIVE_UNFOCUSED  | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
	 * PASSIVE_FOCUSED    | AF_TRIGGER                           | FOCUSED_LOCKED     | Immediate trans. Lens now locked
	 * PASSIVE_UNFOCUSED  | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | Immediate trans. Lens now locked
	 * FOCUSED_LOCKED     | AF_TRIGGER                           | FOCUSED_LOCKED     | No effect
	 * FOCUSED_LOCKED     | AF_CANCEL                            | INACTIVE           | Restart AF scan
	 * NOT_FOCUSED_LOCKED | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | No effect
	 * NOT_FOCUSED_LOCKED | AF_CANCEL                            | INACTIVE           | Restart AF scan</p>
	 * <p>When switch between AF_MODE_CONTINUOUS_* (CAF modes) and AF_MODE_AUTO/AF_MODE_MACRO
	 * (AUTO modes), the initial INACTIVE or PASSIVE_SCAN states may be skipped by the
	 * camera device. When a trigger is included in a mode switch request, the trigger
	 * will be evaluated in the context of the new mode in the request.
	 * See below table for examples:</p>
	 * <p>State      | Transition Cause                       | New State                                | Notes
	 * :-----------:|:--------------------------------------:|:----------------------------------------:|:--------------:
	 * any state    | CAF--&gt;AUTO mode switch                 | INACTIVE                                 | Mode switch without trigger, initial state must be INACTIVE
	 * any state    | CAF--&gt;AUTO mode switch with AF_TRIGGER | trigger-reachable states from INACTIVE   | Mode switch with trigger, INACTIVE is skipped
	 * any state    | AUTO--&gt;CAF mode switch                 | passively reachable states from INACTIVE | Mode switch without trigger, passive transient state is skipped</p>
	 *
	 * @see ACAMERA_CONTROL_AF_MODE
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_CONTROL_SCENE_MODE
	 */
	CONTROL_AF_STATE MetadataTag = C.ACAMERA_CONTROL_AF_STATE // byte (acamera_metadata_enum_android_control_af_state_t)

	/**
	 * <p>Current state of auto-white balance (AWB) algorithm.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_awb_state_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Switching between or enabling AWB modes (ACAMERA_CONTROL_AWB_MODE) always
	 * resets the AWB state to INACTIVE. Similarly, switching between ACAMERA_CONTROL_MODE,
	 * or ACAMERA_CONTROL_SCENE_MODE if <code>ACAMERA_CONTROL_MODE == USE_SCENE_MODE</code> resets all
	 * the algorithm states to INACTIVE.</p>
	 * <p>The camera device can do several state transitions between two results, if it is
	 * allowed by the state transition table. So INACTIVE may never actually be seen in
	 * a result.</p>
	 * <p>The state in the result is the state for this image (in sync with this image): if
	 * AWB state becomes CONVERGED, then the image data associated with this result should
	 * be good to use.</p>
	 * <p>Below are state transition tables for different AWB modes.</p>
	 * <p>When <code>ACAMERA_CONTROL_AWB_MODE != AWB_MODE_AUTO</code>:</p>
	 * <p>State       | Transition Cause | New State | Notes
	 * :------------:|:----------------:|:---------:|:-----------------------:
	 * INACTIVE      |                  |INACTIVE   |Camera device auto white balance algorithm is disabled</p>
	 * <p>When ACAMERA_CONTROL_AWB_MODE is AWB_MODE_AUTO:</p>
	 * <p>State        | Transition Cause                 | New State     | Notes
	 * :-------------:|:--------------------------------:|:-------------:|:-----------------:
	 * INACTIVE       | Camera device initiates AWB scan | SEARCHING     | Values changing
	 * INACTIVE       | ACAMERA_CONTROL_AWB_LOCK is ON    | LOCKED        | Values locked
	 * SEARCHING      | Camera device finishes AWB scan  | CONVERGED     | Good values, not changing
	 * SEARCHING      | ACAMERA_CONTROL_AWB_LOCK is ON    | LOCKED        | Values locked
	 * CONVERGED      | Camera device initiates AWB scan | SEARCHING     | Values changing
	 * CONVERGED      | ACAMERA_CONTROL_AWB_LOCK is ON    | LOCKED        | Values locked
	 * LOCKED         | ACAMERA_CONTROL_AWB_LOCK is OFF   | SEARCHING     | Values not good after unlock</p>
	 * <p>For the above table, the camera device may skip reporting any state changes that happen
	 * without application intervention (i.e. mode switch, trigger, locking). Any state that
	 * can be skipped in that manner is called a transient state.</p>
	 * <p>For example, for this AWB mode (AWB_MODE_AUTO), in addition to the state transitions
	 * listed in above table, it is also legal for the camera device to skip one or more
	 * transient states between two results. See below table for examples:</p>
	 * <p>State        | Transition Cause                 | New State     | Notes
	 * :-------------:|:--------------------------------:|:-------------:|:-----------------:
	 * INACTIVE       | Camera device finished AWB scan  | CONVERGED     | Values are already good, transient states are skipped by camera device.
	 * LOCKED         | ACAMERA_CONTROL_AWB_LOCK is OFF   | CONVERGED     | Values good after unlock, transient states are skipped by camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_LOCK
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_CONTROL_SCENE_MODE
	 */
	CONTROL_AWB_STATE MetadataTag = C.ACAMERA_CONTROL_AWB_STATE // byte (acamera_metadata_enum_android_control_awb_state_t)

	/**
	 * <p>Whether the camera device supports ACAMERA_CONTROL_AE_LOCK</p>
	 *
	 * @see ACAMERA_CONTROL_AE_LOCK
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_ae_lock_available_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Devices with MANUAL_SENSOR capability or BURST_CAPTURE capability will always
	 * list <code>true</code>. This includes FULL devices.</p>
	 */
	CONTROL_AE_LOCK_AVAILABLE MetadataTag = C.ACAMERA_CONTROL_AE_LOCK_AVAILABLE // byte (acamera_metadata_enum_android_control_ae_lock_available_t)

	/**
	 * <p>Whether the camera device supports ACAMERA_CONTROL_AWB_LOCK</p>
	 *
	 * @see ACAMERA_CONTROL_AWB_LOCK
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_awb_lock_available_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Devices with MANUAL_POST_PROCESSING capability or BURST_CAPTURE capability will
	 * always list <code>true</code>. This includes FULL devices.</p>
	 */
	CONTROL_AWB_LOCK_AVAILABLE MetadataTag = C.ACAMERA_CONTROL_AWB_LOCK_AVAILABLE // byte (acamera_metadata_enum_android_control_awb_lock_available_t)

	/**
	 * <p>List of control modes for ACAMERA_CONTROL_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_CONTROL_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This list contains control modes that can be set for the camera device.
	 * LEGACY mode devices will always support AUTO mode. LIMITED and FULL
	 * devices will always support OFF, AUTO modes.</p>
	 */
	CONTROL_AVAILABLE_MODES MetadataTag = C.ACAMERA_CONTROL_AVAILABLE_MODES // byte[n]

	/**
	 * <p>Range of boosts for ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST supported
	 * by this camera device.</p>
	 *
	 * @see ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Devices support post RAW sensitivity boost  will advertise
	 * ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST key for controling
	 * post RAW sensitivity boost.</p>
	 * <p>This key will be <code>null</code> for devices that do not support any RAW format
	 * outputs. For devices that do support RAW format outputs, this key will always
	 * present, and if a device does not support post RAW sensitivity boost, it will
	 * list <code>(100, 100)</code> in this key.</p>
	 *
	 * @see ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST
	 */
	CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE MetadataTag = C.ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE // int32[2]

	/**
	 * <p>The amount of additional sensitivity boost applied to output images
	 * after RAW sensor data is captured.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Some camera devices support additional digital sensitivity boosting in the
	 * camera processing pipeline after sensor RAW image is captured.
	 * Such a boost will be applied to YUV/JPEG format output images but will not
	 * have effect on RAW output formats like RAW_SENSOR, RAW10, RAW12 or RAW_OPAQUE.</p>
	 * <p>This key will be <code>null</code> for devices that do not support any RAW format
	 * outputs. For devices that do support RAW format outputs, this key will always
	 * present, and if a device does not support post RAW sensitivity boost, it will
	 * list <code>100</code> in this key.</p>
	 * <p>If the camera device cannot apply the exact boost requested, it will reduce the
	 * boost to the nearest supported value.
	 * The final boost value used will be available in the output capture result.</p>
	 * <p>For devices that support post RAW sensitivity boost, the YUV/JPEG output images
	 * of such device will have the total sensitivity of
	 * <code>ACAMERA_SENSOR_SENSITIVITY * ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST / 100</code>
	 * The sensitivity of RAW format images will always be <code>ACAMERA_SENSOR_SENSITIVITY</code></p>
	 * <p>This control is only effective if ACAMERA_CONTROL_AE_MODE or ACAMERA_CONTROL_MODE is set to
	 * OFF; otherwise the auto-exposure algorithm will override this value.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	CONTROL_POST_RAW_SENSITIVITY_BOOST MetadataTag = C.ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST // int32

	/**
	 * <p>Allow camera device to enable zero-shutter-lag mode for requests with
	 * ACAMERA_CONTROL_CAPTURE_INTENT == STILL_CAPTURE.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_control_enable_zsl_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>If enableZsl is <code>true</code>, the camera device may enable zero-shutter-lag mode for requests with
	 * STILL_CAPTURE capture intent. The camera device may use images captured in the past to
	 * produce output images for a zero-shutter-lag request. The result metadata including the
	 * ACAMERA_SENSOR_TIMESTAMP reflects the source frames used to produce output images.
	 * Therefore, the contents of the output images and the result metadata may be out of order
	 * compared to previous regular requests. enableZsl does not affect requests with other
	 * capture intents.</p>
	 * <p>For example, when requests are submitted in the following order:
	 *   Request A: enableZsl is <code>true</code>, ACAMERA_CONTROL_CAPTURE_INTENT is PREVIEW
	 *   Request B: enableZsl is <code>true</code>, ACAMERA_CONTROL_CAPTURE_INTENT is STILL_CAPTURE</p>
	 * <p>The output images for request B may have contents captured before the output images for
	 * request A, and the result metadata for request B may be older than the result metadata for
	 * request A.</p>
	 * <p>Note that when enableZsl is <code>true</code>, it is not guaranteed to get output images captured in the
	 * past for requests with STILL_CAPTURE capture intent.</p>
	 * <p>For applications targeting SDK versions O and newer, the value of enableZsl in
	 * TEMPLATE_STILL_CAPTURE template may be <code>true</code>. The value in other templates is always
	 * <code>false</code> if present.</p>
	 * <p>For applications targeting SDK versions older than O, the value of enableZsl in all
	 * capture templates is always <code>false</code> if present.</p>
	 * <p>For application-operated ZSL, use CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.</p>
	 *
	 * @see ACAMERA_CONTROL_CAPTURE_INTENT
	 * @see ACAMERA_SENSOR_TIMESTAMP
	 */
	CONTROL_ENABLE_ZSL MetadataTag = C.ACAMERA_CONTROL_ENABLE_ZSL // byte (acamera_metadata_enum_android_control_enable_zsl_t)

	CONTROL_END MetadataTag = C.ACAMERA_CONTROL_END

	/**
	 * <p>Operation mode for edge
	 * enhancement.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_edge_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Edge enhancement improves sharpness and details in the captured image. OFF means
	 * no enhancement will be applied by the camera device.</p>
	 * <p>FAST/HIGH_QUALITY both mean camera device determined enhancement
	 * will be applied. HIGH_QUALITY mode indicates that the
	 * camera device will use the highest-quality enhancement algorithms,
	 * even if it slows down capture rate. FAST means the camera device will
	 * not slow down capture rate when applying edge enhancement. FAST may be the same as OFF if
	 * edge enhancement will slow down capture rate. Every output stream will have a similar
	 * amount of enhancement applied.</p>
	 * <p>ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
	 * buffer of high-resolution images during preview and reprocess image(s) from that buffer
	 * into a final capture when triggered by the user. In this mode, the camera device applies
	 * edge enhancement to low-resolution streams (below maximum recording resolution) to
	 * maximize preview quality, but does not apply edge enhancement to high-resolution streams,
	 * since those will be reprocessed later if necessary.</p>
	 * <p>For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera
	 * device will apply FAST/HIGH_QUALITY YUV-domain edge enhancement, respectively.
	 * The camera device may adjust its internal edge enhancement parameters for best
	 * image quality based on the android.reprocess.effectiveExposureFactor, if it is set.</p>
	 */
	EDGE_MODE MetadataTag = C.ACAMERA_EDGE_MODE // byte (acamera_metadata_enum_android_edge_mode_t)

	/**
	 * <p>List of edge enhancement modes for ACAMERA_EDGE_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_EDGE_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Full-capability camera devices must always support OFF; camera devices that support
	 * YUV_REPROCESSING or PRIVATE_REPROCESSING will list ZERO_SHUTTER_LAG; all devices will
	 * list FAST.</p>
	 */
	EDGE_AVAILABLE_EDGE_MODES MetadataTag = C.ACAMERA_EDGE_AVAILABLE_EDGE_MODES // byte[n]

	EDGE_END MetadataTag = C.ACAMERA_EDGE_END

	/**
	 * <p>The desired mode for for the camera device's flash control.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_flash_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control is only effective when flash unit is available
	 * (<code>ACAMERA_FLASH_INFO_AVAILABLE == true</code>).</p>
	 * <p>When this control is used, the ACAMERA_CONTROL_AE_MODE must be set to ON or OFF.
	 * Otherwise, the camera device auto-exposure related flash control (ON_AUTO_FLASH,
	 * ON_ALWAYS_FLASH, or ON_AUTO_FLASH_REDEYE) will override this control.</p>
	 * <p>When set to OFF, the camera device will not fire flash for this capture.</p>
	 * <p>When set to SINGLE, the camera device will fire flash regardless of the camera
	 * device's auto-exposure routine's result. When used in still capture case, this
	 * control should be used along with auto-exposure (AE) precapture metering sequence
	 * (ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER), otherwise, the image may be incorrectly exposed.</p>
	 * <p>When set to TORCH, the flash will be on continuously. This mode can be used
	 * for use cases such as preview, auto-focus assist, still capture, or video recording.</p>
	 * <p>The flash status will be reported by ACAMERA_FLASH_STATE in the capture result metadata.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AE_PRECAPTURE_TRIGGER
	 * @see ACAMERA_FLASH_INFO_AVAILABLE
	 * @see ACAMERA_FLASH_STATE
	 */
	FLASH_MODE MetadataTag = C.ACAMERA_FLASH_MODE // byte (acamera_metadata_enum_android_flash_mode_t)

	/**
	 * <p>Current state of the flash
	 * unit.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_flash_state_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>When the camera device doesn't have flash unit
	 * (i.e. <code>ACAMERA_FLASH_INFO_AVAILABLE == false</code>), this state will always be UNAVAILABLE.
	 * Other states indicate the current flash status.</p>
	 * <p>In certain conditions, this will be available on LEGACY devices:</p>
	 * <ul>
	 * <li>Flash-less cameras always return UNAVAILABLE.</li>
	 * <li>Using ACAMERA_CONTROL_AE_MODE <code>==</code> ON_ALWAYS_FLASH
	 *    will always return FIRED.</li>
	 * <li>Using ACAMERA_FLASH_MODE <code>==</code> TORCH
	 *    will always return FIRED.</li>
	 * </ul>
	 * <p>In all other conditions the state will not be available on
	 * LEGACY devices (i.e. it will be <code>null</code>).</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_FLASH_INFO_AVAILABLE
	 * @see ACAMERA_FLASH_MODE
	 */
	FLASH_STATE MetadataTag = C.ACAMERA_FLASH_STATE // byte (acamera_metadata_enum_android_flash_state_t)

	FLASH_END MetadataTag = C.ACAMERA_FLASH_END

	/**
	 * <p>Whether this camera device has a
	 * flash unit.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_flash_info_available_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Will be <code>false</code> if no flash is available.</p>
	 * <p>If there is no flash unit, none of the flash controls do
	 * anything.</p>
	 */
	FLASH_INFO_AVAILABLE MetadataTag = C.ACAMERA_FLASH_INFO_AVAILABLE // byte (acamera_metadata_enum_android_flash_info_available_t)

	FLASH_INFO_END MetadataTag = C.ACAMERA_FLASH_INFO_END

	/**
	 * <p>Operational mode for hot pixel correction.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_hot_pixel_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Hotpixel correction interpolates out, or otherwise removes, pixels
	 * that do not accurately measure the incoming light (i.e. pixels that
	 * are stuck at an arbitrary value or are oversensitive).</p>
	 */
	HOT_PIXEL_MODE MetadataTag = C.ACAMERA_HOT_PIXEL_MODE // byte (acamera_metadata_enum_android_hot_pixel_mode_t)

	/**
	 * <p>List of hot pixel correction modes for ACAMERA_HOT_PIXEL_MODE that are supported by this
	 * camera device.</p>
	 *
	 * @see ACAMERA_HOT_PIXEL_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>FULL mode camera devices will always support FAST.</p>
	 */
	HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES MetadataTag = C.ACAMERA_HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES // byte[n]

	HOT_PIXEL_END MetadataTag = C.ACAMERA_HOT_PIXEL_END

	/**
	 * <p>GPS coordinates to include in output JPEG
	 * EXIF.</p>
	 *
	 * <p>Type: double[3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 */
	JPEG_GPS_COORDINATES MetadataTag = C.ACAMERA_JPEG_GPS_COORDINATES // double[3]

	/**
	 * <p>32 characters describing GPS algorithm to
	 * include in EXIF.</p>
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 */
	JPEG_GPS_PROCESSING_METHOD MetadataTag = C.ACAMERA_JPEG_GPS_PROCESSING_METHOD // byte

	/**
	 * <p>Time GPS fix was made to include in
	 * EXIF.</p>
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 */
	JPEG_GPS_TIMESTAMP MetadataTag = C.ACAMERA_JPEG_GPS_TIMESTAMP // int64

	/**
	 * <p>The orientation for a JPEG image.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The clockwise rotation angle in degrees, relative to the orientation
	 * to the camera, that the JPEG picture needs to be rotated by, to be viewed
	 * upright.</p>
	 * <p>Camera devices may either encode this value into the JPEG EXIF header, or
	 * rotate the image data to match this orientation. When the image data is rotated,
	 * the thumbnail data will also be rotated.</p>
	 * <p>Note that this orientation is relative to the orientation of the camera sensor, given
	 * by ACAMERA_SENSOR_ORIENTATION.</p>
	 * <p>To translate from the device orientation given by the Android sensor APIs, the following
	 * sample code may be used:</p>
	 * <pre><code>private int getJpegOrientation(CameraCharacteristics c, int deviceOrientation) {
	 *     if (deviceOrientation == android.view.OrientationEventListener.ORIENTATION_UNKNOWN) return 0;
	 *     int sensorOrientation = c.get(CameraCharacteristics.SENSOR_ORIENTATION);
	 *
	 *     // Round device orientation to a multiple of 90
	 *     deviceOrientation = (deviceOrientation + 45) / 90 * 90;
	 *
	 *     // Reverse device orientation for front-facing cameras
	 *     boolean facingFront = c.get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT;
	 *     if (facingFront) deviceOrientation = -deviceOrientation;
	 *
	 *     // Calculate desired JPEG orientation relative to camera orientation to make
	 *     // the image upright relative to the device orientation
	 *     int jpegOrientation = (sensorOrientation + deviceOrientation + 360) % 360;
	 *
	 *     return jpegOrientation;
	 * }
	 * </code></pre>
	 *
	 * @see ACAMERA_SENSOR_ORIENTATION
	 */
	JPEG_ORIENTATION MetadataTag = C.ACAMERA_JPEG_ORIENTATION // int32

	/**
	 * <p>Compression quality of the final JPEG
	 * image.</p>
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>85-95 is typical usage range.</p>
	 */
	JPEG_QUALITY MetadataTag = C.ACAMERA_JPEG_QUALITY // byte

	/**
	 * <p>Compression quality of JPEG
	 * thumbnail.</p>
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 */
	JPEG_THUMBNAIL_QUALITY MetadataTag = C.ACAMERA_JPEG_THUMBNAIL_QUALITY // byte

	/**
	 * <p>Resolution of embedded JPEG thumbnail.</p>
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When set to (0, 0) value, the JPEG EXIF will not contain thumbnail,
	 * but the captured JPEG will still be a valid image.</p>
	 * <p>For best results, when issuing a request for a JPEG image, the thumbnail size selected
	 * should have the same aspect ratio as the main JPEG output.</p>
	 * <p>If the thumbnail image aspect ratio differs from the JPEG primary image aspect
	 * ratio, the camera device creates the thumbnail by cropping it from the primary image.
	 * For example, if the primary image has 4:3 aspect ratio, the thumbnail image has
	 * 16:9 aspect ratio, the primary image will be cropped vertically (letterbox) to
	 * generate the thumbnail image. The thumbnail image will always have a smaller Field
	 * Of View (FOV) than the primary image when aspect ratios differ.</p>
	 * <p>When an ACAMERA_JPEG_ORIENTATION of non-zero degree is requested,
	 * the camera device will handle thumbnail rotation in one of the following ways:</p>
	 * <ul>
	 * <li>Set the
	 *   <a href="https://developer.android.com/reference/android/media/ExifInterface.html#TAG_ORIENTATION">EXIF orientation flag</a>
	 *   and keep jpeg and thumbnail image data unrotated.</li>
	 * <li>Rotate the jpeg and thumbnail image data and not set
	 *   <a href="https://developer.android.com/reference/android/media/ExifInterface.html#TAG_ORIENTATION">EXIF orientation flag</a>.
	 *   In this case, LIMITED or FULL hardware level devices will report rotated thumnail size
	 *   in capture result, so the width and height will be interchanged if 90 or 270 degree
	 *   orientation is requested. LEGACY device will always report unrotated thumbnail size.</li>
	 * </ul>
	 *
	 * @see ACAMERA_JPEG_ORIENTATION
	 */
	JPEG_THUMBNAIL_SIZE MetadataTag = C.ACAMERA_JPEG_THUMBNAIL_SIZE // int32[2]

	/**
	 * <p>List of JPEG thumbnail sizes for ACAMERA_JPEG_THUMBNAIL_SIZE supported by this
	 * camera device.</p>
	 *
	 * @see ACAMERA_JPEG_THUMBNAIL_SIZE
	 *
	 * <p>Type: int32[2*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This list will include at least one non-zero resolution, plus <code>(0,0)</code> for indicating no
	 * thumbnail should be generated.</p>
	 * <p>Below condiditions will be satisfied for this size list:</p>
	 * <ul>
	 * <li>The sizes will be sorted by increasing pixel area (width x height).
	 * If several resolutions have the same area, they will be sorted by increasing width.</li>
	 * <li>The aspect ratio of the largest thumbnail size will be same as the
	 * aspect ratio of largest JPEG output size in ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS.
	 * The largest size is defined as the size that has the largest pixel area
	 * in a given size list.</li>
	 * <li>Each output JPEG size in ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS will have at least
	 * one corresponding size that has the same aspect ratio in availableThumbnailSizes,
	 * and vice versa.</li>
	 * <li>All non-<code>(0, 0)</code> sizes will have non-zero widths and heights.</li>
	 * </ul>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS
	 */
	JPEG_AVAILABLE_THUMBNAIL_SIZES MetadataTag = C.ACAMERA_JPEG_AVAILABLE_THUMBNAIL_SIZES // int32[2*n]

	JPEG_END MetadataTag = C.ACAMERA_JPEG_END

	/**
	 * <p>The desired lens aperture size, as a ratio of lens focal length to the
	 * effective aperture diameter.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Setting this value is only supported on the camera devices that have a variable
	 * aperture lens.</p>
	 * <p>When this is supported and ACAMERA_CONTROL_AE_MODE is OFF,
	 * this can be set along with ACAMERA_SENSOR_EXPOSURE_TIME,
	 * ACAMERA_SENSOR_SENSITIVITY, and ACAMERA_SENSOR_FRAME_DURATION
	 * to achieve manual exposure control.</p>
	 * <p>The requested aperture value may take several frames to reach the
	 * requested value; the camera device will report the current (intermediate)
	 * aperture size in capture result metadata while the aperture is changing.
	 * While the aperture is still changing, ACAMERA_LENS_STATE will be set to MOVING.</p>
	 * <p>When this is supported and ACAMERA_CONTROL_AE_MODE is one of
	 * the ON modes, this will be overridden by the camera device
	 * auto-exposure algorithm, the overridden values are then provided
	 * back to the user in the corresponding result.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_LENS_STATE
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	LENS_APERTURE MetadataTag = C.ACAMERA_LENS_APERTURE // float

	/**
	 * <p>The desired setting for the lens neutral density filter(s).</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control will not be supported on most camera devices.</p>
	 * <p>Lens filters are typically used to lower the amount of light the
	 * sensor is exposed to (measured in steps of EV). As used here, an EV
	 * step is the standard logarithmic representation, which are
	 * non-negative, and inversely proportional to the amount of light
	 * hitting the sensor.  For example, setting this to 0 would result
	 * in no reduction of the incoming light, and setting this to 2 would
	 * mean that the filter is set to reduce incoming light by two stops
	 * (allowing 1/4 of the prior amount of light to the sensor).</p>
	 * <p>It may take several frames before the lens filter density changes
	 * to the requested value. While the filter density is still changing,
	 * ACAMERA_LENS_STATE will be set to MOVING.</p>
	 *
	 * @see ACAMERA_LENS_STATE
	 */
	LENS_FILTER_DENSITY MetadataTag = C.ACAMERA_LENS_FILTER_DENSITY // float

	/**
	 * <p>The desired lens focal length; used for optical zoom.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This setting controls the physical focal length of the camera
	 * device's lens. Changing the focal length changes the field of
	 * view of the camera device, and is usually used for optical zoom.</p>
	 * <p>Like ACAMERA_LENS_FOCUS_DISTANCE and ACAMERA_LENS_APERTURE, this
	 * setting won't be applied instantaneously, and it may take several
	 * frames before the lens can change to the requested focal length.
	 * While the focal length is still changing, ACAMERA_LENS_STATE will
	 * be set to MOVING.</p>
	 * <p>Optical zoom will not be supported on most devices.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_LENS_STATE
	 */
	LENS_FOCAL_LENGTH MetadataTag = C.ACAMERA_LENS_FOCAL_LENGTH // float

	/**
	 * <p>Desired distance to plane of sharpest focus,
	 * measured from frontmost surface of the lens.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Should be zero for fixed-focus cameras</p>
	 */
	LENS_FOCUS_DISTANCE MetadataTag = C.ACAMERA_LENS_FOCUS_DISTANCE // float

	/**
	 * <p>Sets whether the camera device uses optical image stabilization (OIS)
	 * when capturing images.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_lens_optical_stabilization_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>OIS is used to compensate for motion blur due to small
	 * movements of the camera during capture. Unlike digital image
	 * stabilization (ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE), OIS
	 * makes use of mechanical elements to stabilize the camera
	 * sensor, and thus allows for longer exposure times before
	 * camera shake becomes apparent.</p>
	 * <p>Switching between different optical stabilization modes may take several
	 * frames to initialize, the camera device will report the current mode in
	 * capture result metadata. For example, When "ON" mode is requested, the
	 * optical stabilization modes in the first several capture results may still
	 * be "OFF", and it will become "ON" when the initialization is done.</p>
	 * <p>If a camera device supports both OIS and digital image stabilization
	 * (ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE), turning both modes on may produce undesirable
	 * interaction, so it is recommended not to enable both at the same time.</p>
	 * <p>Not all devices will support OIS; see
	 * ACAMERA_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION for
	 * available controls.</p>
	 *
	 * @see ACAMERA_CONTROL_VIDEO_STABILIZATION_MODE
	 * @see ACAMERA_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION
	 */
	LENS_OPTICAL_STABILIZATION_MODE MetadataTag = C.ACAMERA_LENS_OPTICAL_STABILIZATION_MODE // byte (acamera_metadata_enum_android_lens_optical_stabilization_mode_t)

	/**
	 * <p>Direction the camera faces relative to
	 * device screen.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_lens_facing_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	LENS_FACING MetadataTag = C.ACAMERA_LENS_FACING // byte (acamera_metadata_enum_android_lens_facing_t)

	/**
	 * <p>The orientation of the camera relative to the sensor
	 * coordinate system.</p>
	 *
	 * <p>Type: float[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The four coefficients that describe the quaternion
	 * rotation from the Android sensor coordinate system to a
	 * camera-aligned coordinate system where the X-axis is
	 * aligned with the long side of the image sensor, the Y-axis
	 * is aligned with the short side of the image sensor, and
	 * the Z-axis is aligned with the optical axis of the sensor.</p>
	 * <p>To convert from the quaternion coefficients <code>(x,y,z,w)</code>
	 * to the axis of rotation <code>(a_x, a_y, a_z)</code> and rotation
	 * amount <code>theta</code>, the following formulas can be used:</p>
	 * <pre><code> theta = 2 * acos(w)
	 * a_x = x / sin(theta/2)
	 * a_y = y / sin(theta/2)
	 * a_z = z / sin(theta/2)
	 * </code></pre>
	 * <p>To create a 3x3 rotation matrix that applies the rotation
	 * defined by this quaternion, the following matrix can be
	 * used:</p>
	 * <pre><code>R = [ 1 - 2y^2 - 2z^2,       2xy - 2zw,       2xz + 2yw,
	 *            2xy + 2zw, 1 - 2x^2 - 2z^2,       2yz - 2xw,
	 *            2xz - 2yw,       2yz + 2xw, 1 - 2x^2 - 2y^2 ]
	 * </code></pre>
	 * <p>This matrix can then be used to apply the rotation to a
	 *  column vector point with</p>
	 * <p><code>p' = Rp</code></p>
	 * <p>where <code>p</code> is in the device sensor coordinate system, and
	 *  <code>p'</code> is in the camera-oriented coordinate system.</p>
	 */
	LENS_POSE_ROTATION MetadataTag = C.ACAMERA_LENS_POSE_ROTATION // float[4]

	/**
	 * <p>Position of the camera optical center.</p>
	 *
	 * <p>Type: float[3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The position of the camera device's lens optical center,
	 * as a three-dimensional vector <code>(x,y,z)</code>, relative to the
	 * optical center of the largest camera device facing in the
	 * same direction as this camera, in the
	 * <a href="https://developer.android.com/reference/android/hardware/SensorEvent.html">Android sensor coordinate axes</a>.
	 * Note that only the axis definitions are shared with
	 * the sensor coordinate system, but not the origin.</p>
	 * <p>If this device is the largest or only camera device with a
	 * given facing, then this position will be <code>(0, 0, 0)</code>; a
	 * camera device with a lens optical center located 3 cm from
	 * the main sensor along the +X axis (to the right from the
	 * user's perspective) will report <code>(0.03, 0, 0)</code>.</p>
	 * <p>To transform a pixel coordinates between two cameras
	 * facing the same direction, first the source camera
	 * ACAMERA_LENS_RADIAL_DISTORTION must be corrected for.  Then
	 * the source camera ACAMERA_LENS_INTRINSIC_CALIBRATION needs
	 * to be applied, followed by the ACAMERA_LENS_POSE_ROTATION
	 * of the source camera, the translation of the source camera
	 * relative to the destination camera, the
	 * ACAMERA_LENS_POSE_ROTATION of the destination camera, and
	 * finally the inverse of ACAMERA_LENS_INTRINSIC_CALIBRATION
	 * of the destination camera. This obtains a
	 * radial-distortion-free coordinate in the destination
	 * camera pixel coordinates.</p>
	 * <p>To compare this against a real image from the destination
	 * camera, the destination camera image then needs to be
	 * corrected for radial distortion before comparison or
	 * sampling.</p>
	 *
	 * @see ACAMERA_LENS_INTRINSIC_CALIBRATION
	 * @see ACAMERA_LENS_POSE_ROTATION
	 * @see ACAMERA_LENS_RADIAL_DISTORTION
	 */
	LENS_POSE_TRANSLATION MetadataTag = C.ACAMERA_LENS_POSE_TRANSLATION // float[3]

	/**
	 * <p>The range of scene distances that are in
	 * sharp focus (depth of field).</p>
	 *
	 * <p>Type: float[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>If variable focus not supported, can still report
	 * fixed depth of field range</p>
	 */
	LENS_FOCUS_RANGE MetadataTag = C.ACAMERA_LENS_FOCUS_RANGE // float[2]

	/**
	 * <p>Current lens status.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_lens_state_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>For lens parameters ACAMERA_LENS_FOCAL_LENGTH, ACAMERA_LENS_FOCUS_DISTANCE,
	 * ACAMERA_LENS_FILTER_DENSITY and ACAMERA_LENS_APERTURE, when changes are requested,
	 * they may take several frames to reach the requested values. This state indicates
	 * the current status of the lens parameters.</p>
	 * <p>When the state is STATIONARY, the lens parameters are not changing. This could be
	 * either because the parameters are all fixed, or because the lens has had enough
	 * time to reach the most recently-requested values.
	 * If all these lens parameters are not changable for a camera device, as listed below:</p>
	 * <ul>
	 * <li>Fixed focus (<code>ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE == 0</code>), which means
	 * ACAMERA_LENS_FOCUS_DISTANCE parameter will always be 0.</li>
	 * <li>Fixed focal length (ACAMERA_LENS_INFO_AVAILABLE_FOCAL_LENGTHS contains single value),
	 * which means the optical zoom is not supported.</li>
	 * <li>No ND filter (ACAMERA_LENS_INFO_AVAILABLE_FILTER_DENSITIES contains only 0).</li>
	 * <li>Fixed aperture (ACAMERA_LENS_INFO_AVAILABLE_APERTURES contains single value).</li>
	 * </ul>
	 * <p>Then this state will always be STATIONARY.</p>
	 * <p>When the state is MOVING, it indicates that at least one of the lens parameters
	 * is changing.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 * @see ACAMERA_LENS_FILTER_DENSITY
	 * @see ACAMERA_LENS_FOCAL_LENGTH
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_LENS_INFO_AVAILABLE_APERTURES
	 * @see ACAMERA_LENS_INFO_AVAILABLE_FILTER_DENSITIES
	 * @see ACAMERA_LENS_INFO_AVAILABLE_FOCAL_LENGTHS
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	LENS_STATE MetadataTag = C.ACAMERA_LENS_STATE // byte (acamera_metadata_enum_android_lens_state_t)

	/**
	 * <p>The parameters for this camera device's intrinsic
	 * calibration.</p>
	 *
	 * <p>Type: float[5]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The five calibration parameters that describe the
	 * transform from camera-centric 3D coordinates to sensor
	 * pixel coordinates:</p>
	 * <pre><code>[f_x, f_y, c_x, c_y, s]
	 * </code></pre>
	 * <p>Where <code>f_x</code> and <code>f_y</code> are the horizontal and vertical
	 * focal lengths, <code>[c_x, c_y]</code> is the position of the optical
	 * axis, and <code>s</code> is a skew parameter for the sensor plane not
	 * being aligned with the lens plane.</p>
	 * <p>These are typically used within a transformation matrix K:</p>
	 * <pre><code>K = [ f_x,   s, c_x,
	 *        0, f_y, c_y,
	 *        0    0,   1 ]
	 * </code></pre>
	 * <p>which can then be combined with the camera pose rotation
	 * <code>R</code> and translation <code>t</code> (ACAMERA_LENS_POSE_ROTATION and
	 * ACAMERA_LENS_POSE_TRANSLATION, respective) to calculate the
	 * complete transform from world coordinates to pixel
	 * coordinates:</p>
	 * <pre><code>P = [ K 0   * [ R t
	 *      0 1 ]     0 1 ]
	 * </code></pre>
	 * <p>and with <code>p_w</code> being a point in the world coordinate system
	 * and <code>p_s</code> being a point in the camera active pixel array
	 * coordinate system, and with the mapping including the
	 * homogeneous division by z:</p>
	 * <pre><code> p_h = (x_h, y_h, z_h) = P p_w
	 * p_s = p_h / z_h
	 * </code></pre>
	 * <p>so <code>[x_s, y_s]</code> is the pixel coordinates of the world
	 * point, <code>z_s = 1</code>, and <code>w_s</code> is a measurement of disparity
	 * (depth) in pixel coordinates.</p>
	 * <p>Note that the coordinate system for this transform is the
	 * ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE system,
	 * where <code>(0,0)</code> is the top-left of the
	 * preCorrectionActiveArraySize rectangle. Once the pose and
	 * intrinsic calibration transforms have been applied to a
	 * world point, then the ACAMERA_LENS_RADIAL_DISTORTION
	 * transform needs to be applied, and the result adjusted to
	 * be in the ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE coordinate
	 * system (where <code>(0, 0)</code> is the top-left of the
	 * activeArraySize rectangle), to determine the final pixel
	 * coordinate of the world point for processed (non-RAW)
	 * output buffers.</p>
	 *
	 * @see ACAMERA_LENS_POSE_ROTATION
	 * @see ACAMERA_LENS_POSE_TRANSLATION
	 * @see ACAMERA_LENS_RADIAL_DISTORTION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
	 */
	LENS_INTRINSIC_CALIBRATION MetadataTag = C.ACAMERA_LENS_INTRINSIC_CALIBRATION // float[5]

	/**
	 * <p>The correction coefficients to correct for this camera device's
	 * radial and tangential lens distortion.</p>
	 *
	 * <p>Type: float[6]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Four radial distortion coefficients <code>[kappa_0, kappa_1, kappa_2,
	 * kappa_3]</code> and two tangential distortion coefficients
	 * <code>[kappa_4, kappa_5]</code> that can be used to correct the
	 * lens's geometric distortion with the mapping equations:</p>
	 * <pre><code> x_c = x_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
	 *        kappa_4 * (2 * x_i * y_i) + kappa_5 * ( r^2 + 2 * x_i^2 )
	 *  y_c = y_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
	 *        kappa_5 * (2 * x_i * y_i) + kappa_4 * ( r^2 + 2 * y_i^2 )
	 * </code></pre>
	 * <p>Here, <code>[x_c, y_c]</code> are the coordinates to sample in the
	 * input image that correspond to the pixel values in the
	 * corrected image at the coordinate <code>[x_i, y_i]</code>:</p>
	 * <pre><code> correctedImage(x_i, y_i) = sample_at(x_c, y_c, inputImage)
	 * </code></pre>
	 * <p>The pixel coordinates are defined in a normalized
	 * coordinate system related to the
	 * ACAMERA_LENS_INTRINSIC_CALIBRATION calibration fields.
	 * Both <code>[x_i, y_i]</code> and <code>[x_c, y_c]</code> have <code>(0,0)</code> at the
	 * lens optical center <code>[c_x, c_y]</code>. The maximum magnitudes
	 * of both x and y coordinates are normalized to be 1 at the
	 * edge further from the optical center, so the range
	 * for both dimensions is <code>-1 &lt;= x &lt;= 1</code>.</p>
	 * <p>Finally, <code>r</code> represents the radial distance from the
	 * optical center, <code>r^2 = x_i^2 + y_i^2</code>, and its magnitude
	 * is therefore no larger than <code>|r| &lt;= sqrt(2)</code>.</p>
	 * <p>The distortion model used is the Brown-Conrady model.</p>
	 *
	 * @see ACAMERA_LENS_INTRINSIC_CALIBRATION
	 */
	LENS_RADIAL_DISTORTION MetadataTag = C.ACAMERA_LENS_RADIAL_DISTORTION // float[6]

	LENS_END MetadataTag = C.ACAMERA_LENS_END

	/**
	 * <p>List of aperture size values for ACAMERA_LENS_APERTURE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_LENS_APERTURE
	 *
	 * <p>Type: float[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If the camera device doesn't support a variable lens aperture,
	 * this list will contain only one value, which is the fixed aperture size.</p>
	 * <p>If the camera device supports a variable aperture, the aperture values
	 * in this list will be sorted in ascending order.</p>
	 */
	LENS_INFO_AVAILABLE_APERTURES MetadataTag = C.ACAMERA_LENS_INFO_AVAILABLE_APERTURES // float[n]

	/**
	 * <p>List of neutral density filter values for
	 * ACAMERA_LENS_FILTER_DENSITY that are supported by this camera device.</p>
	 *
	 * @see ACAMERA_LENS_FILTER_DENSITY
	 *
	 * <p>Type: float[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If a neutral density filter is not supported by this camera device,
	 * this list will contain only 0. Otherwise, this list will include every
	 * filter density supported by the camera device, in ascending order.</p>
	 */
	LENS_INFO_AVAILABLE_FILTER_DENSITIES MetadataTag = C.ACAMERA_LENS_INFO_AVAILABLE_FILTER_DENSITIES // float[n]

	/**
	 * <p>List of focal lengths for ACAMERA_LENS_FOCAL_LENGTH that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_LENS_FOCAL_LENGTH
	 *
	 * <p>Type: float[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If optical zoom is not supported, this list will only contain
	 * a single value corresponding to the fixed focal length of the
	 * device. Otherwise, this list will include every focal length supported
	 * by the camera device, in ascending order.</p>
	 */
	LENS_INFO_AVAILABLE_FOCAL_LENGTHS MetadataTag = C.ACAMERA_LENS_INFO_AVAILABLE_FOCAL_LENGTHS // float[n]

	/**
	 * <p>List of optical image stabilization (OIS) modes for
	 * ACAMERA_LENS_OPTICAL_STABILIZATION_MODE that are supported by this camera device.</p>
	 *
	 * @see ACAMERA_LENS_OPTICAL_STABILIZATION_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If OIS is not supported by a given camera device, this list will
	 * contain only OFF.</p>
	 */
	LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION MetadataTag = C.ACAMERA_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION // byte[n]

	/**
	 * <p>Hyperfocal distance for this lens.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If the lens is not fixed focus, the camera device will report this
	 * field when ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION is APPROXIMATE or CALIBRATED.</p>
	 *
	 * @see ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION
	 */
	LENS_INFO_HYPERFOCAL_DISTANCE MetadataTag = C.ACAMERA_LENS_INFO_HYPERFOCAL_DISTANCE // float

	/**
	 * <p>Shortest distance from frontmost surface
	 * of the lens that can be brought into sharp focus.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If the lens is fixed-focus, this will be
	 * 0.</p>
	 */
	LENS_INFO_MINIMUM_FOCUS_DISTANCE MetadataTag = C.ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE // float

	/**
	 * <p>Dimensions of lens shading map.</p>
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The map should be on the order of 30-40 rows and columns, and
	 * must be smaller than 64x64.</p>
	 */
	LENS_INFO_SHADING_MAP_SIZE MetadataTag = C.ACAMERA_LENS_INFO_SHADING_MAP_SIZE // int32[2]

	/**
	 * <p>The lens focus distance calibration quality.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_lens_info_focus_distance_calibration_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The lens focus distance calibration quality determines the reliability of
	 * focus related metadata entries, i.e. ACAMERA_LENS_FOCUS_DISTANCE,
	 * ACAMERA_LENS_FOCUS_RANGE, ACAMERA_LENS_INFO_HYPERFOCAL_DISTANCE, and
	 * ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE.</p>
	 * <p>APPROXIMATE and CALIBRATED devices report the focus metadata in
	 * units of diopters (1/meter), so <code>0.0f</code> represents focusing at infinity,
	 * and increasing positive numbers represent focusing closer and closer
	 * to the camera device. The focus distance control also uses diopters
	 * on these devices.</p>
	 * <p>UNCALIBRATED devices do not use units that are directly comparable
	 * to any real physical measurement, but <code>0.0f</code> still represents farthest
	 * focus, and ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE represents the
	 * nearest focus the device can achieve.</p>
	 *
	 * @see ACAMERA_LENS_FOCUS_DISTANCE
	 * @see ACAMERA_LENS_FOCUS_RANGE
	 * @see ACAMERA_LENS_INFO_HYPERFOCAL_DISTANCE
	 * @see ACAMERA_LENS_INFO_MINIMUM_FOCUS_DISTANCE
	 */
	LENS_INFO_FOCUS_DISTANCE_CALIBRATION MetadataTag = C.ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION // byte (acamera_metadata_enum_android_lens_info_focus_distance_calibration_t)

	LENS_INFO_END MetadataTag = C.ACAMERA_LENS_INFO_END

	/**
	 * <p>Mode of operation for the noise reduction algorithm.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_noise_reduction_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The noise reduction algorithm attempts to improve image quality by removing
	 * excessive noise added by the capture process, especially in dark conditions.</p>
	 * <p>OFF means no noise reduction will be applied by the camera device, for both raw and
	 * YUV domain.</p>
	 * <p>MINIMAL means that only sensor raw domain basic noise reduction is enabled ,to remove
	 * demosaicing or other processing artifacts. For YUV_REPROCESSING, MINIMAL is same as OFF.
	 * This mode is optional, may not be support by all devices. The application should check
	 * ACAMERA_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES before using it.</p>
	 * <p>FAST/HIGH_QUALITY both mean camera device determined noise filtering
	 * will be applied. HIGH_QUALITY mode indicates that the camera device
	 * will use the highest-quality noise filtering algorithms,
	 * even if it slows down capture rate. FAST means the camera device will not
	 * slow down capture rate when applying noise filtering. FAST may be the same as MINIMAL if
	 * MINIMAL is listed, or the same as OFF if any noise filtering will slow down capture rate.
	 * Every output stream will have a similar amount of enhancement applied.</p>
	 * <p>ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
	 * buffer of high-resolution images during preview and reprocess image(s) from that buffer
	 * into a final capture when triggered by the user. In this mode, the camera device applies
	 * noise reduction to low-resolution streams (below maximum recording resolution) to maximize
	 * preview quality, but does not apply noise reduction to high-resolution streams, since
	 * those will be reprocessed later if necessary.</p>
	 * <p>For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera device
	 * will apply FAST/HIGH_QUALITY YUV domain noise reduction, respectively. The camera device
	 * may adjust the noise reduction parameters for best image quality based on the
	 * android.reprocess.effectiveExposureFactor if it is set.</p>
	 *
	 * @see ACAMERA_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES
	 */
	NOISE_REDUCTION_MODE MetadataTag = C.ACAMERA_NOISE_REDUCTION_MODE // byte (acamera_metadata_enum_android_noise_reduction_mode_t)

	/**
	 * <p>List of noise reduction modes for ACAMERA_NOISE_REDUCTION_MODE that are supported
	 * by this camera device.</p>
	 *
	 * @see ACAMERA_NOISE_REDUCTION_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Full-capability camera devices will always support OFF and FAST.</p>
	 * <p>Camera devices that support YUV_REPROCESSING or PRIVATE_REPROCESSING will support
	 * ZERO_SHUTTER_LAG.</p>
	 * <p>Legacy-capability camera devices will only support FAST mode.</p>
	 */
	NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES MetadataTag = C.ACAMERA_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES // byte[n]

	NOISE_REDUCTION_END MetadataTag = C.ACAMERA_NOISE_REDUCTION_END

	/**
	 * <p>The maximum numbers of different types of output streams
	 * that can be configured and used simultaneously by a camera device.</p>
	 *
	 * <p>Type: int32[3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This is a 3 element tuple that contains the max number of output simultaneous
	 * streams for raw sensor, processed (but not stalling), and processed (and stalling)
	 * formats respectively. For example, assuming that JPEG is typically a processed and
	 * stalling stream, if max raw sensor format output stream number is 1, max YUV streams
	 * number is 3, and max JPEG stream number is 2, then this tuple should be <code>(1, 3, 2)</code>.</p>
	 * <p>This lists the upper bound of the number of output streams supported by
	 * the camera device. Using more streams simultaneously may require more hardware and
	 * CPU resources that will consume more power. The image format for an output stream can
	 * be any supported format provided by ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS.
	 * The formats defined in ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS can be catergorized
	 * into the 3 stream types as below:</p>
	 * <ul>
	 * <li>Processed (but stalling): any non-RAW format with a stallDurations &gt; 0.
	 *   Typically {@link AIMAGE_FORMAT_JPEG} format.</li>
	 * <li>Raw formats: {@link AIMAGE_FORMAT_RAW16}, {@link AIMAGE_FORMAT_RAW10}, or
	 *   {@link AIMAGE_FORMAT_RAW12}.</li>
	 * <li>Processed (but not-stalling): any non-RAW format without a stall duration.
	 *   Typically {@link AIMAGE_FORMAT_YUV_420_888}.</li>
	 * </ul>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS
	 */
	REQUEST_MAX_NUM_OUTPUT_STREAMS MetadataTag = C.ACAMERA_REQUEST_MAX_NUM_OUTPUT_STREAMS // int32[3]

	/**
	 * <p>Specifies the number of pipeline stages the frame went
	 * through from when it was exposed to when the final completed result
	 * was available to the framework.</p>
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Depending on what settings are used in the request, and
	 * what streams are configured, the data may undergo less processing,
	 * and some pipeline stages skipped.</p>
	 * <p>See ACAMERA_REQUEST_PIPELINE_MAX_DEPTH for more details.</p>
	 *
	 * @see ACAMERA_REQUEST_PIPELINE_MAX_DEPTH
	 */
	REQUEST_PIPELINE_DEPTH MetadataTag = C.ACAMERA_REQUEST_PIPELINE_DEPTH // byte

	/**
	 * <p>Specifies the number of maximum pipeline stages a frame
	 * has to go through from when it's exposed to when it's available
	 * to the framework.</p>
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>A typical minimum value for this is 2 (one stage to expose,
	 * one stage to readout) from the sensor. The ISP then usually adds
	 * its own stages to do custom HW processing. Further stages may be
	 * added by SW processing.</p>
	 * <p>Depending on what settings are used (e.g. YUV, JPEG) and what
	 * processing is enabled (e.g. face detection), the actual pipeline
	 * depth (specified by ACAMERA_REQUEST_PIPELINE_DEPTH) may be less than
	 * the max pipeline depth.</p>
	 * <p>A pipeline depth of X stages is equivalent to a pipeline latency of
	 * X frame intervals.</p>
	 * <p>This value will normally be 8 or less, however, for high speed capture session,
	 * the max pipeline depth will be up to 8 x size of high speed capture request list.</p>
	 *
	 * @see ACAMERA_REQUEST_PIPELINE_DEPTH
	 */
	REQUEST_PIPELINE_MAX_DEPTH MetadataTag = C.ACAMERA_REQUEST_PIPELINE_MAX_DEPTH // byte

	/**
	 * <p>Defines how many sub-components
	 * a result will be composed of.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>In order to combat the pipeline latency, partial results
	 * may be delivered to the application layer from the camera device as
	 * soon as they are available.</p>
	 * <p>Optional; defaults to 1. A value of 1 means that partial
	 * results are not supported, and only the final TotalCaptureResult will
	 * be produced by the camera device.</p>
	 * <p>A typical use case for this might be: after requesting an
	 * auto-focus (AF) lock the new AF state might be available 50%
	 * of the way through the pipeline.  The camera device could
	 * then immediately dispatch this state via a partial result to
	 * the application, and the rest of the metadata via later
	 * partial results.</p>
	 */
	REQUEST_PARTIAL_RESULT_COUNT MetadataTag = C.ACAMERA_REQUEST_PARTIAL_RESULT_COUNT // int32

	/**
	 * <p>List of capabilities that this camera device
	 * advertises as fully supporting.</p>
	 *
	 * <p>Type: byte[n] (acamera_metadata_enum_android_request_available_capabilities_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>A capability is a contract that the camera device makes in order
	 * to be able to satisfy one or more use cases.</p>
	 * <p>Listing a capability guarantees that the whole set of features
	 * required to support a common use will all be available.</p>
	 * <p>Using a subset of the functionality provided by an unsupported
	 * capability may be possible on a specific camera device implementation;
	 * to do this query each of ACAMERA_REQUEST_AVAILABLE_REQUEST_KEYS,
	 * ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS,
	 * ACAMERA_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS.</p>
	 * <p>The following capabilities are guaranteed to be available on
	 * ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL <code>==</code> FULL devices:</p>
	 * <ul>
	 * <li>MANUAL_SENSOR</li>
	 * <li>MANUAL_POST_PROCESSING</li>
	 * </ul>
	 * <p>Other capabilities may be available on either FULL or LIMITED
	 * devices, but the application should query this key to be sure.</p>
	 *
	 * @see ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL
	 * @see ACAMERA_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS
	 * @see ACAMERA_REQUEST_AVAILABLE_REQUEST_KEYS
	 * @see ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS
	 */
	REQUEST_AVAILABLE_CAPABILITIES MetadataTag = C.ACAMERA_REQUEST_AVAILABLE_CAPABILITIES // byte[n] (acamera_metadata_enum_android_request_available_capabilities_t)

	/**
	 * <p>A list of all keys that the camera device has available
	 * to use with {@link ACaptureRequest}.</p>
	 *
	 * <p>Type: int32[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Attempting to set a key into a CaptureRequest that is not
	 * listed here will result in an invalid request and will be rejected
	 * by the camera device.</p>
	 * <p>This field can be used to query the feature set of a camera device
	 * at a more granular level than capabilities. This is especially
	 * important for optional keys that are not listed under any capability
	 * in ACAMERA_REQUEST_AVAILABLE_CAPABILITIES.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 */
	REQUEST_AVAILABLE_REQUEST_KEYS MetadataTag = C.ACAMERA_REQUEST_AVAILABLE_REQUEST_KEYS // int32[n]

	/**
	 * <p>A list of all keys that the camera device has available
	 * to query with {@link ACameraMetadata} from
	 * {@link ACameraCaptureSession_captureCallback_result}.</p>
	 *
	 * <p>Type: int32[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Attempting to get a key from a CaptureResult that is not
	 * listed here will always return a <code>null</code> value. Getting a key from
	 * a CaptureResult that is listed here will generally never return a <code>null</code>
	 * value.</p>
	 * <p>The following keys may return <code>null</code> unless they are enabled:</p>
	 * <ul>
	 * <li>ACAMERA_STATISTICS_LENS_SHADING_MAP (non-null iff ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE == ON)</li>
	 * </ul>
	 * <p>(Those sometimes-null keys will nevertheless be listed here
	 * if they are available.)</p>
	 * <p>This field can be used to query the feature set of a camera device
	 * at a more granular level than capabilities. This is especially
	 * important for optional keys that are not listed under any capability
	 * in ACAMERA_REQUEST_AVAILABLE_CAPABILITIES.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE
	 */
	REQUEST_AVAILABLE_RESULT_KEYS MetadataTag = C.ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS // int32[n]

	/**
	 * <p>A list of all keys that the camera device has available
	 * to query with {@link ACameraMetadata} from
	 * {@link ACameraManager_getCameraCharacteristics}.</p>
	 *
	 * <p>Type: int32[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This entry follows the same rules as
	 * ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS (except that it applies for
	 * CameraCharacteristics instead of CaptureResult). See above for more
	 * details.</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS
	 */
	REQUEST_AVAILABLE_CHARACTERISTICS_KEYS MetadataTag = C.ACAMERA_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS // int32[n]

	REQUEST_END MetadataTag = C.ACAMERA_REQUEST_END

	/**
	 * <p>The desired region of the sensor to read out for this capture.</p>
	 *
	 * <p>Type: int32[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>This control can be used to implement digital zoom.</p>
	 * <p>The data representation is int[4], which maps to (left, top, width, height).</p>
	 * <p>The crop region coordinate system is based off
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, with <code>(0, 0)</code> being the
	 * top-left corner of the sensor active array.</p>
	 * <p>Output streams use this rectangle to produce their output,
	 * cropping to a smaller region if necessary to maintain the
	 * stream's aspect ratio, then scaling the sensor input to
	 * match the output's configured resolution.</p>
	 * <p>The crop region is applied after the RAW to other color
	 * space (e.g. YUV) conversion. Since raw streams
	 * (e.g. RAW16) don't have the conversion stage, they are not
	 * croppable. The crop region will be ignored by raw streams.</p>
	 * <p>For non-raw streams, any additional per-stream cropping will
	 * be done to maximize the final pixel area of the stream.</p>
	 * <p>For example, if the crop region is set to a 4:3 aspect
	 * ratio, then 4:3 streams will use the exact crop
	 * region. 16:9 streams will further crop vertically
	 * (letterbox).</p>
	 * <p>Conversely, if the crop region is set to a 16:9, then 4:3
	 * outputs will crop horizontally (pillarbox), and 16:9
	 * streams will match exactly. These additional crops will
	 * be centered within the crop region.</p>
	 * <p>The width and height of the crop region cannot
	 * be set to be smaller than
	 * <code>floor( activeArraySize.width / ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM )</code> and
	 * <code>floor( activeArraySize.height / ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM )</code>, respectively.</p>
	 * <p>The camera device may adjust the crop region to account
	 * for rounding and other hardware requirements; the final
	 * crop region used will be included in the output capture
	 * result.</p>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	SCALER_CROP_REGION MetadataTag = C.ACAMERA_SCALER_CROP_REGION // int32[4]

	/**
	 * <p>The maximum ratio between both active area width
	 * and crop region width, and active area height and
	 * crop region height, for ACAMERA_SCALER_CROP_REGION.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This represents the maximum amount of zooming possible by
	 * the camera device, or equivalently, the minimum cropping
	 * window size.</p>
	 * <p>Crop regions that have a width or height that is smaller
	 * than this ratio allows will be rounded up to the minimum
	 * allowed size by the camera device.</p>
	 */
	SCALER_AVAILABLE_MAX_DIGITAL_ZOOM MetadataTag = C.ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM // float

	/**
	 * <p>The available stream configurations that this
	 * camera device supports
	 * (i.e. format, width, height, output/input stream).</p>
	 *
	 * <p>Type: int32[n*4] (acamera_metadata_enum_android_scaler_available_stream_configurations_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The configurations are listed as <code>(format, width, height, input?)</code>
	 * tuples.</p>
	 * <p>For a given use case, the actual maximum supported resolution
	 * may be lower than what is listed here, depending on the destination
	 * Surface for the image data. For example, for recording video,
	 * the video encoder chosen may have a maximum size limit (e.g. 1080p)
	 * smaller than what the camera (e.g. maximum resolution is 3264x2448)
	 * can provide.</p>
	 * <p>Please reference the documentation for the image data destination to
	 * check if it limits the maximum size for image data.</p>
	 * <p>Not all output formats may be supported in a configuration with
	 * an input stream of a particular format. For more details, see
	 * android.scaler.availableInputOutputFormatsMap.</p>
	 * <p>The following table describes the minimum required output stream
	 * configurations based on the hardware level
	 * (ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL):</p>
	 * <p>Format         | Size                                         | Hardware Level | Notes
	 * :-------------:|:--------------------------------------------:|:--------------:|:--------------:
	 * JPEG           | ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE          | Any            |
	 * JPEG           | 1920x1080 (1080p)                            | Any            | if 1080p &lt;= activeArraySize
	 * JPEG           | 1280x720 (720)                               | Any            | if 720p &lt;= activeArraySize
	 * JPEG           | 640x480 (480p)                               | Any            | if 480p &lt;= activeArraySize
	 * JPEG           | 320x240 (240p)                               | Any            | if 240p &lt;= activeArraySize
	 * YUV_420_888    | all output sizes available for JPEG          | FULL           |
	 * YUV_420_888    | all output sizes available for JPEG, up to the maximum video size | LIMITED        |
	 * IMPLEMENTATION_DEFINED | same as YUV_420_888                  | Any            |</p>
	 * <p>Refer to ACAMERA_REQUEST_AVAILABLE_CAPABILITIES for additional
	 * mandatory stream configurations on a per-capability basis.</p>
	 *
	 * @see ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	SCALER_AVAILABLE_STREAM_CONFIGURATIONS MetadataTag = C.ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS // int32[n*4] (acamera_metadata_enum_android_scaler_available_stream_configurations_t)

	/**
	 * <p>This lists the minimum frame duration for each
	 * format/size combination.</p>
	 *
	 * <p>Type: int64[4*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This should correspond to the frame duration when only that
	 * stream is active, with all processing (typically in android.*.mode)
	 * set to either OFF or FAST.</p>
	 * <p>When multiple streams are used in a request, the minimum frame
	 * duration will be max(individual stream min durations).</p>
	 * <p>The minimum frame duration of a stream (of a particular format, size)
	 * is the same regardless of whether the stream is input or output.</p>
	 * <p>See ACAMERA_SENSOR_FRAME_DURATION and
	 * ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS for more details about
	 * calculating the max frame rate.</p>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 */
	SCALER_AVAILABLE_MIN_FRAME_DURATIONS MetadataTag = C.ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS // int64[4*n]

	/**
	 * <p>This lists the maximum stall duration for each
	 * output format/size combination.</p>
	 *
	 * <p>Type: int64[4*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>A stall duration is how much extra time would get added
	 * to the normal minimum frame duration for a repeating request
	 * that has streams with non-zero stall.</p>
	 * <p>For example, consider JPEG captures which have the following
	 * characteristics:</p>
	 * <ul>
	 * <li>JPEG streams act like processed YUV streams in requests for which
	 * they are not included; in requests in which they are directly
	 * referenced, they act as JPEG streams. This is because supporting a
	 * JPEG stream requires the underlying YUV data to always be ready for
	 * use by a JPEG encoder, but the encoder will only be used (and impact
	 * frame duration) on requests that actually reference a JPEG stream.</li>
	 * <li>The JPEG processor can run concurrently to the rest of the camera
	 * pipeline, but cannot process more than 1 capture at a time.</li>
	 * </ul>
	 * <p>In other words, using a repeating YUV request would result
	 * in a steady frame rate (let's say it's 30 FPS). If a single
	 * JPEG request is submitted periodically, the frame rate will stay
	 * at 30 FPS (as long as we wait for the previous JPEG to return each
	 * time). If we try to submit a repeating YUV + JPEG request, then
	 * the frame rate will drop from 30 FPS.</p>
	 * <p>In general, submitting a new request with a non-0 stall time
	 * stream will <em>not</em> cause a frame rate drop unless there are still
	 * outstanding buffers for that stream from previous requests.</p>
	 * <p>Submitting a repeating request with streams (call this <code>S</code>)
	 * is the same as setting the minimum frame duration from
	 * the normal minimum frame duration corresponding to <code>S</code>, added with
	 * the maximum stall duration for <code>S</code>.</p>
	 * <p>If interleaving requests with and without a stall duration,
	 * a request will stall by the maximum of the remaining times
	 * for each can-stall stream with outstanding buffers.</p>
	 * <p>This means that a stalling request will not have an exposure start
	 * until the stall has completed.</p>
	 * <p>This should correspond to the stall duration when only that stream is
	 * active, with all processing (typically in android.*.mode) set to FAST
	 * or OFF. Setting any of the processing modes to HIGH_QUALITY
	 * effectively results in an indeterminate stall duration for all
	 * streams in a request (the regular stall calculation rules are
	 * ignored).</p>
	 * <p>The following formats may always have a stall duration:</p>
	 * <ul>
	 * <li>{@link AIMAGE_FORMAT_JPEG}</li>
	 * <li>{@link AIMAGE_FORMAT_RAW16}</li>
	 * </ul>
	 * <p>The following formats will never have a stall duration:</p>
	 * <ul>
	 * <li>{@link AIMAGE_FORMAT_YUV_420_888}</li>
	 * <li>{@link AIMAGE_FORMAT_RAW10}</li>
	 * </ul>
	 * <p>All other formats may or may not have an allowed stall duration on
	 * a per-capability basis; refer to ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * for more details.</p>
	 * <p>See ACAMERA_SENSOR_FRAME_DURATION for more information about
	 * calculating the max frame rate (absent stalls).</p>
	 *
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 */
	SCALER_AVAILABLE_STALL_DURATIONS MetadataTag = C.ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS // int64[4*n]

	/**
	 * <p>The crop type that this camera device supports.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_scaler_cropping_type_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>When passing a non-centered crop region (ACAMERA_SCALER_CROP_REGION) to a camera
	 * device that only supports CENTER_ONLY cropping, the camera device will move the
	 * crop region to the center of the sensor active array (ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE)
	 * and keep the crop region width and height unchanged. The camera device will return the
	 * final used crop region in metadata result ACAMERA_SCALER_CROP_REGION.</p>
	 * <p>Camera devices that support FREEFORM cropping will support any crop region that
	 * is inside of the active array. The camera device will apply the same crop region and
	 * return the final used crop region in capture result metadata ACAMERA_SCALER_CROP_REGION.</p>
	 * <p>LEGACY capability devices will only support CENTER_ONLY cropping.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	SCALER_CROPPING_TYPE MetadataTag = C.ACAMERA_SCALER_CROPPING_TYPE // byte (acamera_metadata_enum_android_scaler_cropping_type_t)

	SCALER_END MetadataTag = C.ACAMERA_SCALER_END

	/**
	 * <p>Duration each pixel is exposed to
	 * light.</p>
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>If the sensor can't expose this exact duration, it will shorten the
	 * duration exposed to the nearest possible value (rather than expose longer).
	 * The final exposure time used will be available in the output capture result.</p>
	 * <p>This control is only effective if ACAMERA_CONTROL_AE_MODE or ACAMERA_CONTROL_MODE is set to
	 * OFF; otherwise the auto-exposure algorithm will override this value.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 */
	SENSOR_EXPOSURE_TIME MetadataTag = C.ACAMERA_SENSOR_EXPOSURE_TIME // int64

	/**
	 * <p>Duration from start of frame exposure to
	 * start of next frame exposure.</p>
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The maximum frame rate that can be supported by a camera subsystem is
	 * a function of many factors:</p>
	 * <ul>
	 * <li>Requested resolutions of output image streams</li>
	 * <li>Availability of binning / skipping modes on the imager</li>
	 * <li>The bandwidth of the imager interface</li>
	 * <li>The bandwidth of the various ISP processing blocks</li>
	 * </ul>
	 * <p>Since these factors can vary greatly between different ISPs and
	 * sensors, the camera abstraction tries to represent the bandwidth
	 * restrictions with as simple a model as possible.</p>
	 * <p>The model presented has the following characteristics:</p>
	 * <ul>
	 * <li>The image sensor is always configured to output the smallest
	 * resolution possible given the application's requested output stream
	 * sizes.  The smallest resolution is defined as being at least as large
	 * as the largest requested output stream size; the camera pipeline must
	 * never digitally upsample sensor data when the crop region covers the
	 * whole sensor. In general, this means that if only small output stream
	 * resolutions are configured, the sensor can provide a higher frame
	 * rate.</li>
	 * <li>Since any request may use any or all the currently configured
	 * output streams, the sensor and ISP must be configured to support
	 * scaling a single capture to all the streams at the same time.  This
	 * means the camera pipeline must be ready to produce the largest
	 * requested output size without any delay.  Therefore, the overall
	 * frame rate of a given configured stream set is governed only by the
	 * largest requested stream resolution.</li>
	 * <li>Using more than one output stream in a request does not affect the
	 * frame duration.</li>
	 * <li>Certain format-streams may need to do additional background processing
	 * before data is consumed/produced by that stream. These processors
	 * can run concurrently to the rest of the camera pipeline, but
	 * cannot process more than 1 capture at a time.</li>
	 * </ul>
	 * <p>The necessary information for the application, given the model above,
	 * is provided via
	 * {@link ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}.
	 * These are used to determine the maximum frame rate / minimum frame
	 * duration that is possible for a given stream configuration.</p>
	 * <p>Specifically, the application can use the following rules to
	 * determine the minimum frame duration it can request from the camera
	 * device:</p>
	 * <ol>
	 * <li>Let the set of currently configured input/output streams
	 * be called <code>S</code>.</li>
	 * <li>Find the minimum frame durations for each stream in <code>S</code>, by looking
	 * it up in {@link ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
	 * (with its respective size/format). Let this set of frame durations be
	 * called <code>F</code>.</li>
	 * <li>For any given request <code>R</code>, the minimum frame duration allowed
	 * for <code>R</code> is the maximum out of all values in <code>F</code>. Let the streams
	 * used in <code>R</code> be called <code>S_r</code>.</li>
	 * </ol>
	 * <p>If none of the streams in <code>S_r</code> have a stall time (listed in {@link
	 * ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}
	 * using its respective size/format), then the frame duration in <code>F</code>
	 * determines the steady state frame rate that the application will get
	 * if it uses <code>R</code> as a repeating request. Let this special kind of
	 * request be called <code>Rsimple</code>.</p>
	 * <p>A repeating request <code>Rsimple</code> can be <em>occasionally</em> interleaved
	 * by a single capture of a new request <code>Rstall</code> (which has at least
	 * one in-use stream with a non-0 stall time) and if <code>Rstall</code> has the
	 * same minimum frame duration this will not cause a frame rate loss
	 * if all buffers from the previous <code>Rstall</code> have already been
	 * delivered.</p>
	 * <p>For more details about stalling, see
	 * {@link ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}.</p>
	 * <p>This control is only effective if ACAMERA_CONTROL_AE_MODE or ACAMERA_CONTROL_MODE is set to
	 * OFF; otherwise the auto-exposure algorithm will override this value.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 */
	SENSOR_FRAME_DURATION MetadataTag = C.ACAMERA_SENSOR_FRAME_DURATION // int64

	/**
	 * <p>The amount of gain applied to sensor data
	 * before processing.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The sensitivity is the standard ISO sensitivity value,
	 * as defined in ISO 12232:2006.</p>
	 * <p>The sensitivity must be within ACAMERA_SENSOR_INFO_SENSITIVITY_RANGE, and
	 * if if it less than ACAMERA_SENSOR_MAX_ANALOG_SENSITIVITY, the camera device
	 * is guaranteed to use only analog amplification for applying the gain.</p>
	 * <p>If the camera device cannot apply the exact sensitivity
	 * requested, it will reduce the gain to the nearest supported
	 * value. The final sensitivity used will be available in the
	 * output capture result.</p>
	 * <p>This control is only effective if ACAMERA_CONTROL_AE_MODE or ACAMERA_CONTROL_MODE is set to
	 * OFF; otherwise the auto-exposure algorithm will override this value.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 * @see ACAMERA_SENSOR_INFO_SENSITIVITY_RANGE
	 * @see ACAMERA_SENSOR_MAX_ANALOG_SENSITIVITY
	 */
	SENSOR_SENSITIVITY MetadataTag = C.ACAMERA_SENSOR_SENSITIVITY // int32

	/**
	 * <p>The standard reference illuminant used as the scene light source when
	 * calculating the ACAMERA_SENSOR_COLOR_TRANSFORM1,
	 * ACAMERA_SENSOR_CALIBRATION_TRANSFORM1, and
	 * ACAMERA_SENSOR_FORWARD_MATRIX1 matrices.</p>
	 *
	 * @see ACAMERA_SENSOR_CALIBRATION_TRANSFORM1
	 * @see ACAMERA_SENSOR_COLOR_TRANSFORM1
	 * @see ACAMERA_SENSOR_FORWARD_MATRIX1
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_sensor_reference_illuminant1_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The values in this key correspond to the values defined for the
	 * EXIF LightSource tag. These illuminants are standard light sources
	 * that are often used calibrating camera devices.</p>
	 * <p>If this key is present, then ACAMERA_SENSOR_COLOR_TRANSFORM1,
	 * ACAMERA_SENSOR_CALIBRATION_TRANSFORM1, and
	 * ACAMERA_SENSOR_FORWARD_MATRIX1 will also be present.</p>
	 * <p>Some devices may choose to provide a second set of calibration
	 * information for improved quality, including
	 * ACAMERA_SENSOR_REFERENCE_ILLUMINANT2 and its corresponding matrices.</p>
	 *
	 * @see ACAMERA_SENSOR_CALIBRATION_TRANSFORM1
	 * @see ACAMERA_SENSOR_COLOR_TRANSFORM1
	 * @see ACAMERA_SENSOR_FORWARD_MATRIX1
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT2
	 */
	SENSOR_REFERENCE_ILLUMINANT1 MetadataTag = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT1 // byte (acamera_metadata_enum_android_sensor_reference_illuminant1_t)

	/**
	 * <p>The standard reference illuminant used as the scene light source when
	 * calculating the ACAMERA_SENSOR_COLOR_TRANSFORM2,
	 * ACAMERA_SENSOR_CALIBRATION_TRANSFORM2, and
	 * ACAMERA_SENSOR_FORWARD_MATRIX2 matrices.</p>
	 *
	 * @see ACAMERA_SENSOR_CALIBRATION_TRANSFORM2
	 * @see ACAMERA_SENSOR_COLOR_TRANSFORM2
	 * @see ACAMERA_SENSOR_FORWARD_MATRIX2
	 *
	 * <p>Type: byte</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>See ACAMERA_SENSOR_REFERENCE_ILLUMINANT1 for more details.</p>
	 * <p>If this key is present, then ACAMERA_SENSOR_COLOR_TRANSFORM2,
	 * ACAMERA_SENSOR_CALIBRATION_TRANSFORM2, and
	 * ACAMERA_SENSOR_FORWARD_MATRIX2 will also be present.</p>
	 *
	 * @see ACAMERA_SENSOR_CALIBRATION_TRANSFORM2
	 * @see ACAMERA_SENSOR_COLOR_TRANSFORM2
	 * @see ACAMERA_SENSOR_FORWARD_MATRIX2
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT1
	 */
	SENSOR_REFERENCE_ILLUMINANT2 MetadataTag = C.ACAMERA_SENSOR_REFERENCE_ILLUMINANT2 // byte

	/**
	 * <p>A per-device calibration transform matrix that maps from the
	 * reference sensor colorspace to the actual device sensor colorspace.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to correct for per-device variations in the
	 * sensor colorspace, and is used for processing raw buffer data.</p>
	 * <p>The matrix is expressed as a 3x3 matrix in row-major-order, and
	 * contains a per-device calibration transform that maps colors
	 * from reference sensor color space (i.e. the "golden module"
	 * colorspace) into this camera device's native sensor color
	 * space under the first reference illuminant
	 * (ACAMERA_SENSOR_REFERENCE_ILLUMINANT1).</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT1
	 */
	SENSOR_CALIBRATION_TRANSFORM1 MetadataTag = C.ACAMERA_SENSOR_CALIBRATION_TRANSFORM1 // rational[3*3]

	/**
	 * <p>A per-device calibration transform matrix that maps from the
	 * reference sensor colorspace to the actual device sensor colorspace
	 * (this is the colorspace of the raw buffer data).</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to correct for per-device variations in the
	 * sensor colorspace, and is used for processing raw buffer data.</p>
	 * <p>The matrix is expressed as a 3x3 matrix in row-major-order, and
	 * contains a per-device calibration transform that maps colors
	 * from reference sensor color space (i.e. the "golden module"
	 * colorspace) into this camera device's native sensor color
	 * space under the second reference illuminant
	 * (ACAMERA_SENSOR_REFERENCE_ILLUMINANT2).</p>
	 * <p>This matrix will only be present if the second reference
	 * illuminant is present.</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT2
	 */
	SENSOR_CALIBRATION_TRANSFORM2 MetadataTag = C.ACAMERA_SENSOR_CALIBRATION_TRANSFORM2 // rational[3*3]

	/**
	 * <p>A matrix that transforms color values from CIE XYZ color space to
	 * reference sensor color space.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to convert from the standard CIE XYZ color
	 * space to the reference sensor colorspace, and is used when processing
	 * raw buffer data.</p>
	 * <p>The matrix is expressed as a 3x3 matrix in row-major-order, and
	 * contains a color transform matrix that maps colors from the CIE
	 * XYZ color space to the reference sensor color space (i.e. the
	 * "golden module" colorspace) under the first reference illuminant
	 * (ACAMERA_SENSOR_REFERENCE_ILLUMINANT1).</p>
	 * <p>The white points chosen in both the reference sensor color space
	 * and the CIE XYZ colorspace when calculating this transform will
	 * match the standard white point for the first reference illuminant
	 * (i.e. no chromatic adaptation will be applied by this transform).</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT1
	 */
	SENSOR_COLOR_TRANSFORM1 MetadataTag = C.ACAMERA_SENSOR_COLOR_TRANSFORM1 // rational[3*3]

	/**
	 * <p>A matrix that transforms color values from CIE XYZ color space to
	 * reference sensor color space.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to convert from the standard CIE XYZ color
	 * space to the reference sensor colorspace, and is used when processing
	 * raw buffer data.</p>
	 * <p>The matrix is expressed as a 3x3 matrix in row-major-order, and
	 * contains a color transform matrix that maps colors from the CIE
	 * XYZ color space to the reference sensor color space (i.e. the
	 * "golden module" colorspace) under the second reference illuminant
	 * (ACAMERA_SENSOR_REFERENCE_ILLUMINANT2).</p>
	 * <p>The white points chosen in both the reference sensor color space
	 * and the CIE XYZ colorspace when calculating this transform will
	 * match the standard white point for the second reference illuminant
	 * (i.e. no chromatic adaptation will be applied by this transform).</p>
	 * <p>This matrix will only be present if the second reference
	 * illuminant is present.</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT2
	 */
	SENSOR_COLOR_TRANSFORM2 MetadataTag = C.ACAMERA_SENSOR_COLOR_TRANSFORM2 // rational[3*3]

	/**
	 * <p>A matrix that transforms white balanced camera colors from the reference
	 * sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to convert to the standard CIE XYZ colorspace, and
	 * is used when processing raw buffer data.</p>
	 * <p>This matrix is expressed as a 3x3 matrix in row-major-order, and contains
	 * a color transform matrix that maps white balanced colors from the
	 * reference sensor color space to the CIE XYZ color space with a D50 white
	 * point.</p>
	 * <p>Under the first reference illuminant (ACAMERA_SENSOR_REFERENCE_ILLUMINANT1)
	 * this matrix is chosen so that the standard white point for this reference
	 * illuminant in the reference sensor colorspace is mapped to D50 in the
	 * CIE XYZ colorspace.</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT1
	 */
	SENSOR_FORWARD_MATRIX1 MetadataTag = C.ACAMERA_SENSOR_FORWARD_MATRIX1 // rational[3*3]

	/**
	 * <p>A matrix that transforms white balanced camera colors from the reference
	 * sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.</p>
	 *
	 * <p>Type: rational[3*3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This matrix is used to convert to the standard CIE XYZ colorspace, and
	 * is used when processing raw buffer data.</p>
	 * <p>This matrix is expressed as a 3x3 matrix in row-major-order, and contains
	 * a color transform matrix that maps white balanced colors from the
	 * reference sensor color space to the CIE XYZ color space with a D50 white
	 * point.</p>
	 * <p>Under the second reference illuminant (ACAMERA_SENSOR_REFERENCE_ILLUMINANT2)
	 * this matrix is chosen so that the standard white point for this reference
	 * illuminant in the reference sensor colorspace is mapped to D50 in the
	 * CIE XYZ colorspace.</p>
	 * <p>This matrix will only be present if the second reference
	 * illuminant is present.</p>
	 *
	 * @see ACAMERA_SENSOR_REFERENCE_ILLUMINANT2
	 */
	SENSOR_FORWARD_MATRIX2 MetadataTag = C.ACAMERA_SENSOR_FORWARD_MATRIX2 // rational[3*3]

	/**
	 * <p>A fixed black level offset for each of the color filter arrangement
	 * (CFA) mosaic channels.</p>
	 *
	 * <p>Type: int32[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This key specifies the zero light value for each of the CFA mosaic
	 * channels in the camera sensor.  The maximal value output by the
	 * sensor is represented by the value in ACAMERA_SENSOR_INFO_WHITE_LEVEL.</p>
	 * <p>The values are given in the same order as channels listed for the CFA
	 * layout key (see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT), i.e. the
	 * nth value given corresponds to the black level offset for the nth
	 * color channel listed in the CFA.</p>
	 * <p>The black level values of captured images may vary for different
	 * capture settings (e.g., ACAMERA_SENSOR_SENSITIVITY). This key
	 * represents a coarse approximation for such case. It is recommended to
	 * use ACAMERA_SENSOR_DYNAMIC_BLACK_LEVEL or use pixels from
	 * ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS directly for captures when
	 * supported by the camera device, which provides more accurate black
	 * level values. For raw capture in particular, it is recommended to use
	 * pixels from ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS to calculate black
	 * level values for each frame.</p>
	 *
	 * @see ACAMERA_SENSOR_DYNAMIC_BLACK_LEVEL
	 * @see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
	 * @see ACAMERA_SENSOR_INFO_WHITE_LEVEL
	 * @see ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	SENSOR_BLACK_LEVEL_PATTERN MetadataTag = C.ACAMERA_SENSOR_BLACK_LEVEL_PATTERN // int32[4]

	/**
	 * <p>Maximum sensitivity that is implemented
	 * purely through analog gain.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>For ACAMERA_SENSOR_SENSITIVITY values less than or
	 * equal to this, all applied gain must be analog. For
	 * values above this, the gain applied can be a mix of analog and
	 * digital.</p>
	 *
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	SENSOR_MAX_ANALOG_SENSITIVITY MetadataTag = C.ACAMERA_SENSOR_MAX_ANALOG_SENSITIVITY // int32

	/**
	 * <p>Clockwise angle through which the output image needs to be rotated to be
	 * upright on the device screen in its native orientation.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Also defines the direction of rolling shutter readout, which is from top to bottom in
	 * the sensor's coordinate system.</p>
	 */
	SENSOR_ORIENTATION MetadataTag = C.ACAMERA_SENSOR_ORIENTATION // int32

	/**
	 * <p>Time at start of exposure of first
	 * row of the image sensor active array, in nanoseconds.</p>
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The timestamps are also included in all image
	 * buffers produced for the same capture, and will be identical
	 * on all the outputs.</p>
	 * <p>When ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE <code>==</code> UNKNOWN,
	 * the timestamps measure time since an unspecified starting point,
	 * and are monotonically increasing. They can be compared with the
	 * timestamps for other captures from the same camera device, but are
	 * not guaranteed to be comparable to any other time source.</p>
	 * <p>When ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE <code>==</code> REALTIME, the
	 * timestamps measure time in the same timebase as
	 * <a href="https://developer.android.com/reference/android/os/SystemClock.html#elapsedRealtimeNanos">elapsedRealtimeNanos</a>
	 * (or CLOCK_BOOTTIME), and they can
	 * be compared to other timestamps from other subsystems that
	 * are using that base.</p>
	 * <p>For reprocessing, the timestamp will match the start of exposure of
	 * the input image, i.e. {@link CaptureResult#SENSOR_TIMESTAMP the
	 * timestamp} in the TotalCaptureResult that was used to create the
	 * reprocess capture request.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE
	 */
	SENSOR_TIMESTAMP MetadataTag = C.ACAMERA_SENSOR_TIMESTAMP // int64

	/**
	 * <p>The estimated camera neutral color in the native sensor colorspace at
	 * the time of capture.</p>
	 *
	 * <p>Type: rational[3]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>This value gives the neutral color point encoded as an RGB value in the
	 * native sensor color space.  The neutral color point indicates the
	 * currently estimated white point of the scene illumination.  It can be
	 * used to interpolate between the provided color transforms when
	 * processing raw sensor data.</p>
	 * <p>The order of the values is R, G, B; where R is in the lowest index.</p>
	 */
	SENSOR_NEUTRAL_COLOR_POINT MetadataTag = C.ACAMERA_SENSOR_NEUTRAL_COLOR_POINT // rational[3]

	/**
	 * <p>Noise model coefficients for each CFA mosaic channel.</p>
	 *
	 * <p>Type: double[2*CFA Channels]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>This key contains two noise model coefficients for each CFA channel
	 * corresponding to the sensor amplification (S) and sensor readout
	 * noise (O).  These are given as pairs of coefficients for each channel
	 * in the same order as channels listed for the CFA layout key
	 * (see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT).  This is
	 * represented as an array of Pair&lt;Double, Double&gt;, where
	 * the first member of the Pair at index n is the S coefficient and the
	 * second member is the O coefficient for the nth color channel in the CFA.</p>
	 * <p>These coefficients are used in a two parameter noise model to describe
	 * the amount of noise present in the image for each CFA channel.  The
	 * noise model used here is:</p>
	 * <p>N(x) = sqrt(Sx + O)</p>
	 * <p>Where x represents the recorded signal of a CFA channel normalized to
	 * the range [0, 1], and S and O are the noise model coeffiecients for
	 * that channel.</p>
	 * <p>A more detailed description of the noise model can be found in the
	 * Adobe DNG specification for the NoiseProfile tag.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
	 */
	SENSOR_NOISE_PROFILE MetadataTag = C.ACAMERA_SENSOR_NOISE_PROFILE // double[2*CFA Channels]

	/**
	 * <p>The worst-case divergence between Bayer green channels.</p>
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>This value is an estimate of the worst case split between the
	 * Bayer green channels in the red and blue rows in the sensor color
	 * filter array.</p>
	 * <p>The green split is calculated as follows:</p>
	 * <ol>
	 * <li>A 5x5 pixel (or larger) window W within the active sensor array is
	 * chosen. The term 'pixel' here is taken to mean a group of 4 Bayer
	 * mosaic channels (R, Gr, Gb, B).  The location and size of the window
	 * chosen is implementation defined, and should be chosen to provide a
	 * green split estimate that is both representative of the entire image
	 * for this camera sensor, and can be calculated quickly.</li>
	 * <li>The arithmetic mean of the green channels from the red
	 * rows (mean_Gr) within W is computed.</li>
	 * <li>The arithmetic mean of the green channels from the blue
	 * rows (mean_Gb) within W is computed.</li>
	 * <li>The maximum ratio R of the two means is computed as follows:
	 * <code>R = max((mean_Gr + 1)/(mean_Gb + 1), (mean_Gb + 1)/(mean_Gr + 1))</code></li>
	 * </ol>
	 * <p>The ratio R is the green split divergence reported for this property,
	 * which represents how much the green channels differ in the mosaic
	 * pattern.  This value is typically used to determine the treatment of
	 * the green mosaic channels when demosaicing.</p>
	 * <p>The green split value can be roughly interpreted as follows:</p>
	 * <ul>
	 * <li>R &lt; 1.03 is a negligible split (&lt;3% divergence).</li>
	 * <li>1.20 &lt;= R &gt;= 1.03 will require some software
	 * correction to avoid demosaic errors (3-20% divergence).</li>
	 * <li>R &gt; 1.20 will require strong software correction to produce
	 * a usuable image (&gt;20% divergence).</li>
	 * </ul>
	 */
	SENSOR_GREEN_SPLIT MetadataTag = C.ACAMERA_SENSOR_GREEN_SPLIT // float

	/**
	 * <p>A pixel <code>[R, G_even, G_odd, B]</code> that supplies the test pattern
	 * when ACAMERA_SENSOR_TEST_PATTERN_MODE is SOLID_COLOR.</p>
	 *
	 * @see ACAMERA_SENSOR_TEST_PATTERN_MODE
	 *
	 * <p>Type: int32[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Each color channel is treated as an unsigned 32-bit integer.
	 * The camera device then uses the most significant X bits
	 * that correspond to how many bits are in its Bayer raw sensor
	 * output.</p>
	 * <p>For example, a sensor with RAW10 Bayer output would use the
	 * 10 most significant bits from each color channel.</p>
	 */
	SENSOR_TEST_PATTERN_DATA MetadataTag = C.ACAMERA_SENSOR_TEST_PATTERN_DATA // int32[4]

	/**
	 * <p>When enabled, the sensor sends a test pattern instead of
	 * doing a real exposure from the camera.</p>
	 *
	 * <p>Type: int32 (acamera_metadata_enum_android_sensor_test_pattern_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When a test pattern is enabled, all manual sensor controls specified
	 * by ACAMERA_SENSOR_* will be ignored. All other controls should
	 * work as normal.</p>
	 * <p>For example, if manual flash is enabled, flash firing should still
	 * occur (and that the test pattern remain unmodified, since the flash
	 * would not actually affect it).</p>
	 * <p>Defaults to OFF.</p>
	 */
	SENSOR_TEST_PATTERN_MODE MetadataTag = C.ACAMERA_SENSOR_TEST_PATTERN_MODE // int32 (acamera_metadata_enum_android_sensor_test_pattern_mode_t)

	/**
	 * <p>List of sensor test pattern modes for ACAMERA_SENSOR_TEST_PATTERN_MODE
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_SENSOR_TEST_PATTERN_MODE
	 *
	 * <p>Type: int32[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Defaults to OFF, and always includes OFF if defined.</p>
	 */
	SENSOR_AVAILABLE_TEST_PATTERN_MODES MetadataTag = C.ACAMERA_SENSOR_AVAILABLE_TEST_PATTERN_MODES // int32[n]

	/**
	 * <p>Duration between the start of first row exposure
	 * and the start of last row exposure.</p>
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>This is the exposure time skew between the first and last
	 * row exposure start times. The first row and the last row are
	 * the first and last rows inside of the
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.</p>
	 * <p>For typical camera sensors that use rolling shutters, this is also equivalent
	 * to the frame readout time.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 */
	SENSOR_ROLLING_SHUTTER_SKEW MetadataTag = C.ACAMERA_SENSOR_ROLLING_SHUTTER_SKEW // int64

	/**
	 * <p>List of disjoint rectangles indicating the sensor
	 * optically shielded black pixel regions.</p>
	 *
	 * <p>Type: int32[4*num_regions]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>In most camera sensors, the active array is surrounded by some
	 * optically shielded pixel areas. By blocking light, these pixels
	 * provides a reliable black reference for black level compensation
	 * in active array region.</p>
	 * <p>The data representation is int[4], which maps to (left, top, width, height).</p>
	 * <p>This key provides a list of disjoint rectangles specifying the
	 * regions of optically shielded (with metal shield) black pixel
	 * regions if the camera device is capable of reading out these black
	 * pixels in the output raw images. In comparison to the fixed black
	 * level values reported by ACAMERA_SENSOR_BLACK_LEVEL_PATTERN, this key
	 * may provide a more accurate way for the application to calculate
	 * black level of each captured raw images.</p>
	 * <p>When this key is reported, the ACAMERA_SENSOR_DYNAMIC_BLACK_LEVEL and
	 * ACAMERA_SENSOR_DYNAMIC_WHITE_LEVEL will also be reported.</p>
	 *
	 * @see ACAMERA_SENSOR_BLACK_LEVEL_PATTERN
	 * @see ACAMERA_SENSOR_DYNAMIC_BLACK_LEVEL
	 * @see ACAMERA_SENSOR_DYNAMIC_WHITE_LEVEL
	 */
	SENSOR_OPTICAL_BLACK_REGIONS MetadataTag = C.ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS // int32[4*num_regions]

	/**
	 * <p>A per-frame dynamic black level offset for each of the color filter
	 * arrangement (CFA) mosaic channels.</p>
	 *
	 * <p>Type: float[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Camera sensor black levels may vary dramatically for different
	 * capture settings (e.g. ACAMERA_SENSOR_SENSITIVITY). The fixed black
	 * level reported by ACAMERA_SENSOR_BLACK_LEVEL_PATTERN may be too
	 * inaccurate to represent the actual value on a per-frame basis. The
	 * camera device internal pipeline relies on reliable black level values
	 * to process the raw images appropriately. To get the best image
	 * quality, the camera device may choose to estimate the per frame black
	 * level values either based on optically shielded black regions
	 * (ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS) or its internal model.</p>
	 * <p>This key reports the camera device estimated per-frame zero light
	 * value for each of the CFA mosaic channels in the camera sensor. The
	 * ACAMERA_SENSOR_BLACK_LEVEL_PATTERN may only represent a coarse
	 * approximation of the actual black level values. This value is the
	 * black level used in camera device internal image processing pipeline
	 * and generally more accurate than the fixed black level values.
	 * However, since they are estimated values by the camera device, they
	 * may not be as accurate as the black level values calculated from the
	 * optical black pixels reported by ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS.</p>
	 * <p>The values are given in the same order as channels listed for the CFA
	 * layout key (see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT), i.e. the
	 * nth value given corresponds to the black level offset for the nth
	 * color channel listed in the CFA.</p>
	 * <p>This key will be available if ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS is
	 * available or the camera device advertises this key via
	 * {@link ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.</p>
	 *
	 * @see ACAMERA_SENSOR_BLACK_LEVEL_PATTERN
	 * @see ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
	 * @see ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	SENSOR_DYNAMIC_BLACK_LEVEL MetadataTag = C.ACAMERA_SENSOR_DYNAMIC_BLACK_LEVEL // float[4]

	/**
	 * <p>Maximum raw value output by sensor for this frame.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Since the ACAMERA_SENSOR_BLACK_LEVEL_PATTERN may change for different
	 * capture settings (e.g., ACAMERA_SENSOR_SENSITIVITY), the white
	 * level will change accordingly. This key is similar to
	 * ACAMERA_SENSOR_INFO_WHITE_LEVEL, but specifies the camera device
	 * estimated white level for each frame.</p>
	 * <p>This key will be available if ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS is
	 * available or the camera device advertises this key via
	 * {@link ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.</p>
	 *
	 * @see ACAMERA_SENSOR_BLACK_LEVEL_PATTERN
	 * @see ACAMERA_SENSOR_INFO_WHITE_LEVEL
	 * @see ACAMERA_SENSOR_OPTICAL_BLACK_REGIONS
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	SENSOR_DYNAMIC_WHITE_LEVEL MetadataTag = C.ACAMERA_SENSOR_DYNAMIC_WHITE_LEVEL // int32

	SENSOR_END MetadataTag = C.ACAMERA_SENSOR_END

	/**
	 * <p>The area of the image sensor which corresponds to active pixels after any geometric
	 * distortion correction has been applied.</p>
	 *
	 * <p>Type: int32[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This is the rectangle representing the size of the active region of the sensor (i.e.
	 * the region that actually receives light from the scene) after any geometric correction
	 * has been applied, and should be treated as the maximum size in pixels of any of the
	 * image output formats aside from the raw formats.</p>
	 * <p>This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
	 * the full pixel array, and the size of the full pixel array is given by
	 * ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE.</p>
	 * <p>The data representation is int[4], which maps to (left, top, width, height).</p>
	 * <p>The coordinate system for most other keys that list pixel coordinates, including
	 * ACAMERA_SCALER_CROP_REGION, is defined relative to the active array rectangle given in
	 * this field, with <code>(0, 0)</code> being the top-left of this rectangle.</p>
	 * <p>The active array may be smaller than the full pixel array, since the full array may
	 * include black calibration pixels or other inactive regions, and geometric correction
	 * resulting in scaling or cropping may have been applied.</p>
	 *
	 * @see ACAMERA_SCALER_CROP_REGION
	 * @see ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 */
	SENSOR_INFO_ACTIVE_ARRAY_SIZE MetadataTag = C.ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE // int32[4]

	/**
	 * <p>Range of sensitivities for ACAMERA_SENSOR_SENSITIVITY supported by this
	 * camera device.</p>
	 *
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The values are the standard ISO sensitivity values,
	 * as defined in ISO 12232:2006.</p>
	 */
	SENSOR_INFO_SENSITIVITY_RANGE MetadataTag = C.ACAMERA_SENSOR_INFO_SENSITIVITY_RANGE // int32[2]

	/**
	 * <p>The arrangement of color filters on sensor;
	 * represents the colors in the top-left 2x2 section of
	 * the sensor, in reading order.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_sensor_info_color_filter_arrangement_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	SENSOR_INFO_COLOR_FILTER_ARRANGEMENT MetadataTag = C.ACAMERA_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT // byte (acamera_metadata_enum_android_sensor_info_color_filter_arrangement_t)

	/**
	 * <p>The range of image exposure times for ACAMERA_SENSOR_EXPOSURE_TIME supported
	 * by this camera device.</p>
	 *
	 * @see ACAMERA_SENSOR_EXPOSURE_TIME
	 *
	 * <p>Type: int64[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	SENSOR_INFO_EXPOSURE_TIME_RANGE MetadataTag = C.ACAMERA_SENSOR_INFO_EXPOSURE_TIME_RANGE // int64[2]

	/**
	 * <p>The maximum possible frame duration (minimum frame rate) for
	 * ACAMERA_SENSOR_FRAME_DURATION that is supported this camera device.</p>
	 *
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 *
	 * <p>Type: int64</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Attempting to use frame durations beyond the maximum will result in the frame
	 * duration being clipped to the maximum. See that control for a full definition of frame
	 * durations.</p>
	 * <p>Refer to {@link
	 * ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
	 * for the minimum frame duration values.</p>
	 */
	SENSOR_INFO_MAX_FRAME_DURATION MetadataTag = C.ACAMERA_SENSOR_INFO_MAX_FRAME_DURATION // int64

	/**
	 * <p>The physical dimensions of the full pixel
	 * array.</p>
	 *
	 * <p>Type: float[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This is the physical size of the sensor pixel
	 * array defined by ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 */
	SENSOR_INFO_PHYSICAL_SIZE MetadataTag = C.ACAMERA_SENSOR_INFO_PHYSICAL_SIZE // float[2]

	/**
	 * <p>Dimensions of the full pixel array, possibly
	 * including black calibration pixels.</p>
	 *
	 * <p>Type: int32[2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The pixel count of the full pixel array of the image sensor, which covers
	 * ACAMERA_SENSOR_INFO_PHYSICAL_SIZE area.  This represents the full pixel dimensions of
	 * the raw buffers produced by this sensor.</p>
	 * <p>If a camera device supports raw sensor formats, either this or
	 * ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE is the maximum dimensions for the raw
	 * output formats listed in ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS (this depends on
	 * whether or not the image sensor returns buffers containing pixels that are not
	 * part of the active array region for blacklevel calibration or other purposes).</p>
	 * <p>Some parts of the full pixel array may not receive light from the scene,
	 * or be otherwise inactive.  The ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE key
	 * defines the rectangle of active pixels that will be included in processed image
	 * formats.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_PHYSICAL_SIZE
	 * @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
	 */
	SENSOR_INFO_PIXEL_ARRAY_SIZE MetadataTag = C.ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE // int32[2]

	/**
	 * <p>Maximum raw value output by sensor.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This specifies the fully-saturated encoding level for the raw
	 * sample values from the sensor.  This is typically caused by the
	 * sensor becoming highly non-linear or clipping. The minimum for
	 * each channel is specified by the offset in the
	 * ACAMERA_SENSOR_BLACK_LEVEL_PATTERN key.</p>
	 * <p>The white level is typically determined either by sensor bit depth
	 * (8-14 bits is expected), or by the point where the sensor response
	 * becomes too non-linear to be useful.  The default value for this is
	 * maximum representable value for a 16-bit raw sample (2^16 - 1).</p>
	 * <p>The white level values of captured images may vary for different
	 * capture settings (e.g., ACAMERA_SENSOR_SENSITIVITY). This key
	 * represents a coarse approximation for such case. It is recommended
	 * to use ACAMERA_SENSOR_DYNAMIC_WHITE_LEVEL for captures when supported
	 * by the camera device, which provides more accurate white level values.</p>
	 *
	 * @see ACAMERA_SENSOR_BLACK_LEVEL_PATTERN
	 * @see ACAMERA_SENSOR_DYNAMIC_WHITE_LEVEL
	 * @see ACAMERA_SENSOR_SENSITIVITY
	 */
	SENSOR_INFO_WHITE_LEVEL MetadataTag = C.ACAMERA_SENSOR_INFO_WHITE_LEVEL // int32

	/**
	 * <p>The time base source for sensor capture start timestamps.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_sensor_info_timestamp_source_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The timestamps provided for captures are always in nanoseconds and monotonic, but
	 * may not based on a time source that can be compared to other system time sources.</p>
	 * <p>This characteristic defines the source for the timestamps, and therefore whether they
	 * can be compared against other system time sources/timestamps.</p>
	 */
	SENSOR_INFO_TIMESTAMP_SOURCE MetadataTag = C.ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE // byte (acamera_metadata_enum_android_sensor_info_timestamp_source_t)

	/**
	 * <p>Whether the RAW images output from this camera device are subject to
	 * lens shading correction.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_sensor_info_lens_shading_applied_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If TRUE, all images produced by the camera device in the RAW image formats will
	 * have lens shading correction already applied to it. If FALSE, the images will
	 * not be adjusted for lens shading correction.
	 * See android.request.maxNumOutputRaw for a list of RAW image formats.</p>
	 * <p>This key will be <code>null</code> for all devices do not report this information.
	 * Devices with RAW capability will always report this information in this key.</p>
	 */
	SENSOR_INFO_LENS_SHADING_APPLIED MetadataTag = C.ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED // byte (acamera_metadata_enum_android_sensor_info_lens_shading_applied_t)

	/**
	 * <p>The area of the image sensor which corresponds to active pixels prior to the
	 * application of any geometric distortion correction.</p>
	 *
	 * <p>Type: int32[4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The data representation is int[4], which maps to (left, top, width, height).</p>
	 * <p>This is the rectangle representing the size of the active region of the sensor (i.e.
	 * the region that actually receives light from the scene) before any geometric correction
	 * has been applied, and should be treated as the active region rectangle for any of the
	 * raw formats.  All metadata associated with raw processing (e.g. the lens shading
	 * correction map, and radial distortion fields) treats the top, left of this rectangle as
	 * the origin, (0,0).</p>
	 * <p>The size of this region determines the maximum field of view and the maximum number of
	 * pixels that an image from this sensor can contain, prior to the application of
	 * geometric distortion correction. The effective maximum pixel dimensions of a
	 * post-distortion-corrected image is given by the ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * field, and the effective maximum field of view for a post-distortion-corrected image
	 * can be calculated by applying the geometric distortion correction fields to this
	 * rectangle, and cropping to the rectangle given in ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.</p>
	 * <p>E.g. to calculate position of a pixel, (x,y), in a processed YUV output image with the
	 * dimensions in ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE given the position of a pixel,
	 * (x', y'), in the raw pixel array with dimensions give in
	 * ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE:</p>
	 * <ol>
	 * <li>Choose a pixel (x', y') within the active array region of the raw buffer given in
	 * ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE, otherwise this pixel is considered
	 * to be outside of the FOV, and will not be shown in the processed output image.</li>
	 * <li>Apply geometric distortion correction to get the post-distortion pixel coordinate,
	 * (x_i, y_i). When applying geometric correction metadata, note that metadata for raw
	 * buffers is defined relative to the top, left of the
	 * ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE rectangle.</li>
	 * <li>If the resulting corrected pixel coordinate is within the region given in
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, then the position of this pixel in the
	 * processed output image buffer is <code>(x_i - activeArray.left, y_i - activeArray.top)</code>,
	 * when the top, left coordinate of that buffer is treated as (0, 0).</li>
	 * </ol>
	 * <p>Thus, for pixel x',y' = (25, 25) on a sensor where ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 * is (100,100), ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE is (10, 10, 100, 100),
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE is (20, 20, 80, 80), and the geometric distortion
	 * correction doesn't change the pixel coordinate, the resulting pixel selected in
	 * pixel coordinates would be x,y = (25, 25) relative to the top,left of the raw buffer
	 * with dimensions given in ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE, and would be (5, 5)
	 * relative to the top,left of post-processed YUV output buffer with dimensions given in
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.</p>
	 * <p>The currently supported fields that correct for geometric distortion are:</p>
	 * <ol>
	 * <li>ACAMERA_LENS_RADIAL_DISTORTION.</li>
	 * </ol>
	 * <p>If all of the geometric distortion fields are no-ops, this rectangle will be the same
	 * as the post-distortion-corrected rectangle given in
	 * ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.</p>
	 * <p>This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
	 * the full pixel array, and the size of the full pixel array is given by
	 * ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE.</p>
	 * <p>The pre-correction active array may be smaller than the full pixel array, since the
	 * full array may include black calibration pixels or other inactive regions.</p>
	 *
	 * @see ACAMERA_LENS_RADIAL_DISTORTION
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * @see ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 * @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
	 */
	SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE MetadataTag = C.ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE // int32[4]

	SENSOR_INFO_END MetadataTag = C.ACAMERA_SENSOR_INFO_END

	/**
	 * <p>Quality of lens shading correction applied
	 * to the image data.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_shading_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When set to OFF mode, no lens shading correction will be applied by the
	 * camera device, and an identity lens shading map data will be provided
	 * if <code>ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE == ON</code>. For example, for lens
	 * shading map with size of <code>[ 4, 3 ]</code>,
	 * the output android.statistics.lensShadingCorrectionMap for this case will be an identity
	 * map shown below:</p>
	 * <pre><code>[ 1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
	 *  1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
	 *  1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
	 *  1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
	 *  1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
	 *  1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0 ]
	 * </code></pre>
	 * <p>When set to other modes, lens shading correction will be applied by the camera
	 * device. Applications can request lens shading map data by setting
	 * ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE to ON, and then the camera device will provide lens
	 * shading map data in android.statistics.lensShadingCorrectionMap; the returned shading map
	 * data will be the one applied by the camera device for this capture request.</p>
	 * <p>The shading map data may depend on the auto-exposure (AE) and AWB statistics, therefore
	 * the reliability of the map data may be affected by the AE and AWB algorithms. When AE and
	 * AWB are in AUTO modes(ACAMERA_CONTROL_AE_MODE <code>!=</code> OFF and ACAMERA_CONTROL_AWB_MODE <code>!=</code>
	 * OFF), to get best results, it is recommended that the applications wait for the AE and AWB
	 * to be converged before using the returned shading map data.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_AWB_MODE
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE
	 */
	SHADING_MODE MetadataTag = C.ACAMERA_SHADING_MODE // byte (acamera_metadata_enum_android_shading_mode_t)

	/**
	 * <p>List of lens shading modes for ACAMERA_SHADING_MODE that are supported by this camera device.</p>
	 *
	 * @see ACAMERA_SHADING_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This list contains lens shading modes that can be set for the camera device.
	 * Camera devices that support the MANUAL_POST_PROCESSING capability will always
	 * list OFF and FAST mode. This includes all FULL level devices.
	 * LEGACY devices will always only support FAST mode.</p>
	 */
	SHADING_AVAILABLE_MODES MetadataTag = C.ACAMERA_SHADING_AVAILABLE_MODES // byte[n]

	SHADING_END MetadataTag = C.ACAMERA_SHADING_END

	/**
	 * <p>Operating mode for the face detector
	 * unit.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_statistics_face_detect_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Whether face detection is enabled, and whether it
	 * should output just the basic fields or the full set of
	 * fields.</p>
	 */
	STATISTICS_FACE_DETECT_MODE MetadataTag = C.ACAMERA_STATISTICS_FACE_DETECT_MODE // byte (acamera_metadata_enum_android_statistics_face_detect_mode_t)

	/**
	 * <p>Operating mode for hot pixel map generation.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_statistics_hot_pixel_map_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>If set to <code>true</code>, a hot pixel map is returned in ACAMERA_STATISTICS_HOT_PIXEL_MAP.
	 * If set to <code>false</code>, no hot pixel map will be returned.</p>
	 *
	 * @see ACAMERA_STATISTICS_HOT_PIXEL_MAP
	 */
	STATISTICS_HOT_PIXEL_MAP_MODE MetadataTag = C.ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE // byte (acamera_metadata_enum_android_statistics_hot_pixel_map_mode_t)

	/**
	 * <p>List of unique IDs for detected faces.</p>
	 *
	 * <p>Type: int32[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Each detected face is given a unique ID that is valid for as long as the face is visible
	 * to the camera device.  A face that leaves the field of view and later returns may be
	 * assigned a new ID.</p>
	 * <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE == FULL</p>
	 *
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 */
	STATISTICS_FACE_IDS MetadataTag = C.ACAMERA_STATISTICS_FACE_IDS // int32[n]

	/**
	 * <p>List of landmarks for detected
	 * faces.</p>
	 *
	 * <p>Type: int32[n*6]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The coordinate system is that of ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, with
	 * <code>(0, 0)</code> being the top-left pixel of the active array.</p>
	 * <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE == FULL</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 */
	STATISTICS_FACE_LANDMARKS MetadataTag = C.ACAMERA_STATISTICS_FACE_LANDMARKS // int32[n*6]

	/**
	 * <p>List of the bounding rectangles for detected
	 * faces.</p>
	 *
	 * <p>Type: int32[n*4]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The data representation is int[4], which maps to (left, top, width, height).</p>
	 * <p>The coordinate system is that of ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, with
	 * <code>(0, 0)</code> being the top-left pixel of the active array.</p>
	 * <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE != OFF</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 */
	STATISTICS_FACE_RECTANGLES MetadataTag = C.ACAMERA_STATISTICS_FACE_RECTANGLES // int32[n*4]

	/**
	 * <p>List of the face confidence scores for
	 * detected faces</p>
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE != OFF.</p>
	 *
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 */
	STATISTICS_FACE_SCORES MetadataTag = C.ACAMERA_STATISTICS_FACE_SCORES // byte[n]

	/**
	 * <p>The shading map is a low-resolution floating-point map
	 * that lists the coefficients used to correct for vignetting and color shading,
	 * for each Bayer color channel of RAW image data.</p>
	 *
	 * <p>Type: float[4*n*m]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>The map provided here is the same map that is used by the camera device to
	 * correct both color shading and vignetting for output non-RAW images.</p>
	 * <p>When there is no lens shading correction applied to RAW
	 * output images (ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED <code>==</code>
	 * false), this map is the complete lens shading correction
	 * map; when there is some lens shading correction applied to
	 * the RAW output image (ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED<code>==</code> true), this map reports the remaining lens shading
	 * correction map that needs to be applied to get shading
	 * corrected images that match the camera device's output for
	 * non-RAW formats.</p>
	 * <p>For a complete shading correction map, the least shaded
	 * section of the image will have a gain factor of 1; all
	 * other sections will have gains above 1.</p>
	 * <p>When ACAMERA_COLOR_CORRECTION_MODE = TRANSFORM_MATRIX, the map
	 * will take into account the colorCorrection settings.</p>
	 * <p>The shading map is for the entire active pixel array, and is not
	 * affected by the crop region specified in the request. Each shading map
	 * entry is the value of the shading compensation map over a specific
	 * pixel on the sensor.  Specifically, with a (N x M) resolution shading
	 * map, and an active pixel array size (W x H), shading map entry
	 * (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at
	 * pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels.
	 * The map is assumed to be bilinearly interpolated between the sample points.</p>
	 * <p>The channel order is [R, Geven, Godd, B], where Geven is the green
	 * channel for the even rows of a Bayer pattern, and Godd is the odd rows.
	 * The shading map is stored in a fully interleaved format, and its size
	 * is provided in the camera static metadata by ACAMERA_LENS_INFO_SHADING_MAP_SIZE.</p>
	 * <p>The shading map will generally have on the order of 30-40 rows and columns,
	 * and will be smaller than 64x64.</p>
	 * <p>As an example, given a very small map defined as:</p>
	 * <pre><code>ACAMERA_LENS_INFO_SHADING_MAP_SIZE = [ 4, 3 ]
	 * ACAMERA_STATISTICS_LENS_SHADING_MAP =
	 * [ 1.3, 1.2, 1.15, 1.2,  1.2, 1.2, 1.15, 1.2,
	 *     1.1, 1.2, 1.2, 1.2,  1.3, 1.2, 1.3, 1.3,
	 *   1.2, 1.2, 1.25, 1.1,  1.1, 1.1, 1.1, 1.0,
	 *     1.0, 1.0, 1.0, 1.0,  1.2, 1.3, 1.25, 1.2,
	 *   1.3, 1.2, 1.2, 1.3,   1.2, 1.15, 1.1, 1.2,
	 *     1.2, 1.1, 1.0, 1.2,  1.3, 1.15, 1.2, 1.3 ]
	 * </code></pre>
	 * <p>The low-resolution scaling map images for each channel are
	 * (displayed using nearest-neighbor interpolation):</p>
	 * <p><img alt="Red lens shading map" src="../images/camera2/metadata/android.statistics.lensShadingMap/red_shading.png" />
	 * <img alt="Green (even rows) lens shading map" src="../images/camera2/metadata/android.statistics.lensShadingMap/green_e_shading.png" />
	 * <img alt="Green (odd rows) lens shading map" src="../images/camera2/metadata/android.statistics.lensShadingMap/green_o_shading.png" />
	 * <img alt="Blue lens shading map" src="../images/camera2/metadata/android.statistics.lensShadingMap/blue_shading.png" /></p>
	 * <p>As a visualization only, inverting the full-color map to recover an
	 * image of a gray wall (using bicubic interpolation for visual quality)
	 * as captured by the sensor gives:</p>
	 * <p><img alt="Image of a uniform white wall (inverse shading map)" src="../images/camera2/metadata/android.statistics.lensShadingMap/inv_shading.png" /></p>
	 * <p>Note that the RAW image data might be subject to lens shading
	 * correction not reported on this map. Query
	 * ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED to see if RAW image data has subject
	 * to lens shading correction. If ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED
	 * is TRUE, the RAW image data is subject to partial or full lens shading
	 * correction. In the case full lens shading correction is applied to RAW
	 * images, the gain factor map reported in this key will contain all 1.0 gains.
	 * In other words, the map reported in this key is the remaining lens shading
	 * that needs to be applied on the RAW image to get images without lens shading
	 * artifacts. See android.request.maxNumOutputRaw for a list of RAW image
	 * formats.</p>
	 *
	 * @see ACAMERA_COLOR_CORRECTION_MODE
	 * @see ACAMERA_LENS_INFO_SHADING_MAP_SIZE
	 * @see ACAMERA_SENSOR_INFO_LENS_SHADING_APPLIED
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP
	 */
	STATISTICS_LENS_SHADING_MAP MetadataTag = C.ACAMERA_STATISTICS_LENS_SHADING_MAP // float[4*n*m]

	/**
	 * <p>The camera device estimated scene illumination lighting
	 * frequency.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_statistics_scene_flicker_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>Many light sources, such as most fluorescent lights, flicker at a rate
	 * that depends on the local utility power standards. This flicker must be
	 * accounted for by auto-exposure routines to avoid artifacts in captured images.
	 * The camera device uses this entry to tell the application what the scene
	 * illuminant frequency is.</p>
	 * <p>When manual exposure control is enabled
	 * (<code>ACAMERA_CONTROL_AE_MODE == OFF</code> or <code>ACAMERA_CONTROL_MODE ==
	 * OFF</code>), the ACAMERA_CONTROL_AE_ANTIBANDING_MODE doesn't perform
	 * antibanding, and the application can ensure it selects
	 * exposure times that do not cause banding issues by looking
	 * into this metadata field. See
	 * ACAMERA_CONTROL_AE_ANTIBANDING_MODE for more details.</p>
	 * <p>Reports NONE if there doesn't appear to be flickering illumination.</p>
	 *
	 * @see ACAMERA_CONTROL_AE_ANTIBANDING_MODE
	 * @see ACAMERA_CONTROL_AE_MODE
	 * @see ACAMERA_CONTROL_MODE
	 */
	STATISTICS_SCENE_FLICKER MetadataTag = C.ACAMERA_STATISTICS_SCENE_FLICKER // byte (acamera_metadata_enum_android_statistics_scene_flicker_t)

	/**
	 * <p>List of <code>(x, y)</code> coordinates of hot/defective pixels on the sensor.</p>
	 *
	 * <p>Type: int32[2*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>A coordinate <code>(x, y)</code> must lie between <code>(0, 0)</code>, and
	 * <code>(width - 1, height - 1)</code> (inclusive), which are the top-left and
	 * bottom-right of the pixel array, respectively. The width and
	 * height dimensions are given in ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE.
	 * This may include hot pixels that lie outside of the active array
	 * bounds given by ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE.</p>
	 *
	 * @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
	 * @see ACAMERA_SENSOR_INFO_PIXEL_ARRAY_SIZE
	 */
	STATISTICS_HOT_PIXEL_MAP MetadataTag = C.ACAMERA_STATISTICS_HOT_PIXEL_MAP // int32[2*n]

	/**
	 * <p>Whether the camera device will output the lens
	 * shading map in output result metadata.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_statistics_lens_shading_map_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When set to ON,
	 * ACAMERA_STATISTICS_LENS_SHADING_MAP will be provided in
	 * the output result metadata.</p>
	 * <p>ON is always supported on devices with the RAW capability.</p>
	 *
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP
	 */
	STATISTICS_LENS_SHADING_MAP_MODE MetadataTag = C.ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE // byte (acamera_metadata_enum_android_statistics_lens_shading_map_mode_t)

	STATISTICS_END MetadataTag = C.ACAMERA_STATISTICS_END

	/**
	 * <p>List of face detection modes for ACAMERA_STATISTICS_FACE_DETECT_MODE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_STATISTICS_FACE_DETECT_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>OFF is always supported.</p>
	 */
	STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES MetadataTag = C.ACAMERA_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES // byte[n]

	/**
	 * <p>The maximum number of simultaneously detectable
	 * faces.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 */
	STATISTICS_INFO_MAX_FACE_COUNT MetadataTag = C.ACAMERA_STATISTICS_INFO_MAX_FACE_COUNT // int32

	/**
	 * <p>List of hot pixel map output modes for ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE that are
	 * supported by this camera device.</p>
	 *
	 * @see ACAMERA_STATISTICS_HOT_PIXEL_MAP_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If no hotpixel map output is available for this camera device, this will contain only
	 * <code>false</code>.</p>
	 * <p>ON is always supported on devices with the RAW capability.</p>
	 */
	STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES MetadataTag = C.ACAMERA_STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES // byte[n]

	/**
	 * <p>List of lens shading map output modes for ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE that
	 * are supported by this camera device.</p>
	 *
	 * @see ACAMERA_STATISTICS_LENS_SHADING_MAP_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If no lens shading map output is available for this camera device, this key will
	 * contain only OFF.</p>
	 * <p>ON is always supported on devices with the RAW capability.
	 * LEGACY mode devices will always only support OFF.</p>
	 */
	STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES MetadataTag = C.ACAMERA_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES // byte[n]

	STATISTICS_INFO_END MetadataTag = C.ACAMERA_STATISTICS_INFO_END

	/**
	 * <p>Tonemapping / contrast / gamma curve for the blue
	 * channel, to use when ACAMERA_TONEMAP_MODE is
	 * CONTRAST_CURVE.</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: float[n*2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>See ACAMERA_TONEMAP_CURVE_RED for more details.</p>
	 *
	 * @see ACAMERA_TONEMAP_CURVE_RED
	 */
	TONEMAP_CURVE_BLUE MetadataTag = C.ACAMERA_TONEMAP_CURVE_BLUE // float[n*2]

	/**
	 * <p>Tonemapping / contrast / gamma curve for the green
	 * channel, to use when ACAMERA_TONEMAP_MODE is
	 * CONTRAST_CURVE.</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: float[n*2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>See ACAMERA_TONEMAP_CURVE_RED for more details.</p>
	 *
	 * @see ACAMERA_TONEMAP_CURVE_RED
	 */
	TONEMAP_CURVE_GREEN MetadataTag = C.ACAMERA_TONEMAP_CURVE_GREEN // float[n*2]

	/**
	 * <p>Tonemapping / contrast / gamma curve for the red
	 * channel, to use when ACAMERA_TONEMAP_MODE is
	 * CONTRAST_CURVE.</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: float[n*2]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Each channel's curve is defined by an array of control points:</p>
	 * <pre><code>ACAMERA_TONEMAP_CURVE_RED =
	 *   [ P0in, P0out, P1in, P1out, P2in, P2out, P3in, P3out, ..., PNin, PNout ]
	 * 2 &lt;= N &lt;= ACAMERA_TONEMAP_MAX_CURVE_POINTS</code></pre>
	 * <p>These are sorted in order of increasing <code>Pin</code>; it is
	 * required that input values 0.0 and 1.0 are included in the list to
	 * define a complete mapping. For input values between control points,
	 * the camera device must linearly interpolate between the control
	 * points.</p>
	 * <p>Each curve can have an independent number of points, and the number
	 * of points can be less than max (that is, the request doesn't have to
	 * always provide a curve with number of points equivalent to
	 * ACAMERA_TONEMAP_MAX_CURVE_POINTS).</p>
	 * <p>A few examples, and their corresponding graphical mappings; these
	 * only specify the red channel and the precision is limited to 4
	 * digits, for conciseness.</p>
	 * <p>Linear mapping:</p>
	 * <pre><code>ACAMERA_TONEMAP_CURVE_RED = [ 0, 0, 1.0, 1.0 ]
	 * </code></pre>
	 * <p><img alt="Linear mapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/linear_tonemap.png" /></p>
	 * <p>Invert mapping:</p>
	 * <pre><code>ACAMERA_TONEMAP_CURVE_RED = [ 0, 1.0, 1.0, 0 ]
	 * </code></pre>
	 * <p><img alt="Inverting mapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/inverse_tonemap.png" /></p>
	 * <p>Gamma 1/2.2 mapping, with 16 control points:</p>
	 * <pre><code>ACAMERA_TONEMAP_CURVE_RED = [
	 *   0.0000, 0.0000, 0.0667, 0.2920, 0.1333, 0.4002, 0.2000, 0.4812,
	 *   0.2667, 0.5484, 0.3333, 0.6069, 0.4000, 0.6594, 0.4667, 0.7072,
	 *   0.5333, 0.7515, 0.6000, 0.7928, 0.6667, 0.8317, 0.7333, 0.8685,
	 *   0.8000, 0.9035, 0.8667, 0.9370, 0.9333, 0.9691, 1.0000, 1.0000 ]
	 * </code></pre>
	 * <p><img alt="Gamma = 1/2.2 tonemapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/gamma_tonemap.png" /></p>
	 * <p>Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:</p>
	 * <pre><code>ACAMERA_TONEMAP_CURVE_RED = [
	 *   0.0000, 0.0000, 0.0667, 0.2864, 0.1333, 0.4007, 0.2000, 0.4845,
	 *   0.2667, 0.5532, 0.3333, 0.6125, 0.4000, 0.6652, 0.4667, 0.7130,
	 *   0.5333, 0.7569, 0.6000, 0.7977, 0.6667, 0.8360, 0.7333, 0.8721,
	 *   0.8000, 0.9063, 0.8667, 0.9389, 0.9333, 0.9701, 1.0000, 1.0000 ]
	 * </code></pre>
	 * <p><img alt="sRGB tonemapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p>
	 *
	 * @see ACAMERA_TONEMAP_CURVE_RED
	 * @see ACAMERA_TONEMAP_MAX_CURVE_POINTS
	 */
	TONEMAP_CURVE_RED MetadataTag = C.ACAMERA_TONEMAP_CURVE_RED // float[n*2]

	/**
	 * <p>High-level global contrast/gamma/tonemapping control.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_tonemap_mode_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>When switching to an application-defined contrast curve by setting
	 * ACAMERA_TONEMAP_MODE to CONTRAST_CURVE, the curve is defined
	 * per-channel with a set of <code>(in, out)</code> points that specify the
	 * mapping from input high-bit-depth pixel value to the output
	 * low-bit-depth value.  Since the actual pixel ranges of both input
	 * and output may change depending on the camera pipeline, the values
	 * are specified by normalized floating-point numbers.</p>
	 * <p>More-complex color mapping operations such as 3D color look-up
	 * tables, selective chroma enhancement, or other non-linear color
	 * transforms will be disabled when ACAMERA_TONEMAP_MODE is
	 * CONTRAST_CURVE.</p>
	 * <p>When using either FAST or HIGH_QUALITY, the camera device will
	 * emit its own tonemap curve in android.tonemap.curve.
	 * These values are always available, and as close as possible to the
	 * actually used nonlinear/nonglobal transforms.</p>
	 * <p>If a request is sent with CONTRAST_CURVE with the camera device's
	 * provided curve in FAST or HIGH_QUALITY, the image's tonemap will be
	 * roughly the same.</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 */
	TONEMAP_MODE MetadataTag = C.ACAMERA_TONEMAP_MODE // byte (acamera_metadata_enum_android_tonemap_mode_t)

	/**
	 * <p>Maximum number of supported points in the
	 * tonemap curve that can be used for android.tonemap.curve.</p>
	 *
	 * <p>Type: int32</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If the actual number of points provided by the application (in ACAMERA_TONEMAPCURVE_*) is
	 * less than this maximum, the camera device will resample the curve to its internal
	 * representation, using linear interpolation.</p>
	 * <p>The output curves in the result metadata may have a different number
	 * of points than the input curves, and will represent the actual
	 * hardware curves used as closely as possible when linearly interpolated.</p>
	 */
	TONEMAP_MAX_CURVE_POINTS MetadataTag = C.ACAMERA_TONEMAP_MAX_CURVE_POINTS // int32

	/**
	 * <p>List of tonemapping modes for ACAMERA_TONEMAP_MODE that are supported by this camera
	 * device.</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: byte[n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>Camera devices that support the MANUAL_POST_PROCESSING capability will always contain
	 * at least one of below mode combinations:</p>
	 * <ul>
	 * <li>CONTRAST_CURVE, FAST and HIGH_QUALITY</li>
	 * <li>GAMMA_VALUE, PRESET_CURVE, FAST and HIGH_QUALITY</li>
	 * </ul>
	 * <p>This includes all FULL level devices.</p>
	 */
	TONEMAP_AVAILABLE_TONE_MAP_MODES MetadataTag = C.ACAMERA_TONEMAP_AVAILABLE_TONE_MAP_MODES // byte[n]

	/**
	 * <p>Tonemapping curve to use when ACAMERA_TONEMAP_MODE is
	 * GAMMA_VALUE</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: float</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The tonemap curve will be defined the following formula:
	 * * OUT = pow(IN, 1.0 / gamma)
	 * where IN and OUT is the input pixel value scaled to range [0.0, 1.0],
	 * pow is the power function and gamma is the gamma value specified by this
	 * key.</p>
	 * <p>The same curve will be applied to all color channels. The camera device
	 * may clip the input gamma value to its supported range. The actual applied
	 * value will be returned in capture result.</p>
	 * <p>The valid range of gamma value varies on different devices, but values
	 * within [1.0, 5.0] are guaranteed not to be clipped.</p>
	 */
	TONEMAP_GAMMA MetadataTag = C.ACAMERA_TONEMAP_GAMMA // float

	/**
	 * <p>Tonemapping curve to use when ACAMERA_TONEMAP_MODE is
	 * PRESET_CURVE</p>
	 *
	 * @see ACAMERA_TONEMAP_MODE
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_tonemap_preset_curve_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>The tonemap curve will be defined by specified standard.</p>
	 * <p>sRGB (approximated by 16 control points):</p>
	 * <p><img alt="sRGB tonemapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p>
	 * <p>Rec. 709 (approximated by 16 control points):</p>
	 * <p><img alt="Rec. 709 tonemapping curve" src="../images/camera2/metadata/android.tonemap.curveRed/rec709_tonemap.png" /></p>
	 * <p>Note that above figures show a 16 control points approximation of preset
	 * curves. Camera devices may apply a different approximation to the curve.</p>
	 */
	TONEMAP_PRESET_CURVE MetadataTag = C.ACAMERA_TONEMAP_PRESET_CURVE // byte (acamera_metadata_enum_android_tonemap_preset_curve_t)

	TONEMAP_END MetadataTag = C.ACAMERA_TONEMAP_END

	/**
	 * <p>Generally classifies the overall set of the camera device functionality.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_info_supported_hardware_level_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>The supported hardware level is a high-level description of the camera device's
	 * capabilities, summarizing several capabilities into one field.  Each level adds additional
	 * features to the previous one, and is always a strict superset of the previous level.
	 * The ordering is <code>LEGACY &lt; LIMITED &lt; FULL &lt; LEVEL_3</code>.</p>
	 * <p>Starting from <code>LEVEL_3</code>, the level enumerations are guaranteed to be in increasing
	 * numerical value as well. To check if a given device is at least at a given hardware level,
	 * the following code snippet can be used:</p>
	 * <pre><code>// Returns true if the device supports the required hardware level, or better.
	 * boolean isHardwareLevelSupported(CameraCharacteristics c, int requiredLevel) {
	 *     int deviceLevel = c.get(CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL);
	 *     if (deviceLevel == CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY) {
	 *         return requiredLevel == deviceLevel;
	 *     }
	 *     // deviceLevel is not LEGACY, can use numerical sort
	 *     return requiredLevel &lt;= deviceLevel;
	 * }
	 * </code></pre>
	 * <p>At a high level, the levels are:</p>
	 * <ul>
	 * <li><code>LEGACY</code> devices operate in a backwards-compatibility mode for older
	 *   Android devices, and have very limited capabilities.</li>
	 * <li><code>LIMITED</code> devices represent the
	 *   baseline feature set, and may also include additional capabilities that are
	 *   subsets of <code>FULL</code>.</li>
	 * <li><code>FULL</code> devices additionally support per-frame manual control of sensor, flash, lens and
	 *   post-processing settings, and image capture at a high rate.</li>
	 * <li><code>LEVEL_3</code> devices additionally support YUV reprocessing and RAW image capture, along
	 *   with additional output stream configurations.</li>
	 * </ul>
	 * <p>See the individual level enums for full descriptions of the supported capabilities.  The
	 * ACAMERA_REQUEST_AVAILABLE_CAPABILITIES entry describes the device's capabilities at a
	 * finer-grain level, if needed. In addition, many controls have their available settings or
	 * ranges defined in individual metadata tag entries in this document.</p>
	 * <p>Some features are not part of any particular hardware level or capability and must be
	 * queried separately. These include:</p>
	 * <ul>
	 * <li>Calibrated timestamps (ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE <code>==</code> REALTIME)</li>
	 * <li>Precision lens control (ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION <code>==</code> CALIBRATED)</li>
	 * <li>Face detection (ACAMERA_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES)</li>
	 * <li>Optical or electrical image stabilization
	 *   (ACAMERA_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION,
	 *    ACAMERA_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES)</li>
	 * </ul>
	 *
	 * @see ACAMERA_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES
	 * @see ACAMERA_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION
	 * @see ACAMERA_LENS_INFO_FOCUS_DISTANCE_CALIBRATION
	 * @see ACAMERA_REQUEST_AVAILABLE_CAPABILITIES
	 * @see ACAMERA_SENSOR_INFO_TIMESTAMP_SOURCE
	 * @see ACAMERA_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES
	 */
	INFO_SUPPORTED_HARDWARE_LEVEL MetadataTag = C.ACAMERA_INFO_SUPPORTED_HARDWARE_LEVEL // byte (acamera_metadata_enum_android_info_supported_hardware_level_t)

	INFO_END MetadataTag = C.ACAMERA_INFO_END

	/**
	 * <p>Whether black-level compensation is locked
	 * to its current values, or is free to vary.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_black_level_lock_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 *   <li>ACaptureRequest</li>
	 * </ul></p>
	 *
	 * <p>Whether the black level offset was locked for this frame.  Should be
	 * ON if ACAMERA_BLACK_LEVEL_LOCK was ON in the capture request, unless
	 * a change in other capture settings forced the camera device to
	 * perform a black level reset.</p>
	 *
	 * @see ACAMERA_BLACK_LEVEL_LOCK
	 */
	BLACK_LEVEL_LOCK MetadataTag = C.ACAMERA_BLACK_LEVEL_LOCK // byte (acamera_metadata_enum_android_black_level_lock_t)

	BLACK_LEVEL_END MetadataTag = C.ACAMERA_BLACK_LEVEL_END

	/**
	 * <p>The frame number corresponding to the last request
	 * with which the output result (metadata + buffers) has been fully
	 * synchronized.</p>
	 *
	 * <p>Type: int64 (acamera_metadata_enum_android_sync_frame_number_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
	 * </ul></p>
	 *
	 * <p>When a request is submitted to the camera device, there is usually a
	 * delay of several frames before the controls get applied. A camera
	 * device may either choose to account for this delay by implementing a
	 * pipeline and carefully submit well-timed atomic control updates, or
	 * it may start streaming control changes that span over several frame
	 * boundaries.</p>
	 * <p>In the latter case, whenever a request's settings change relative to
	 * the previous submitted request, the full set of changes may take
	 * multiple frame durations to fully take effect. Some settings may
	 * take effect sooner (in less frame durations) than others.</p>
	 * <p>While a set of control changes are being propagated, this value
	 * will be CONVERGING.</p>
	 * <p>Once it is fully known that a set of control changes have been
	 * finished propagating, and the resulting updated control settings
	 * have been read back by the camera device, this value will be set
	 * to a non-negative frame number (corresponding to the request to
	 * which the results have synchronized to).</p>
	 * <p>Older camera device implementations may not have a way to detect
	 * when all camera controls have been applied, and will always set this
	 * value to UNKNOWN.</p>
	 * <p>FULL capability devices will always have this value set to the
	 * frame number of the request corresponding to this result.</p>
	 * <p><em>Further details</em>:</p>
	 * <ul>
	 * <li>Whenever a request differs from the last request, any future
	 * results not yet returned may have this value set to CONVERGING (this
	 * could include any in-progress captures not yet returned by the camera
	 * device, for more details see pipeline considerations below).</li>
	 * <li>Submitting a series of multiple requests that differ from the
	 * previous request (e.g. r1, r2, r3 s.t. r1 != r2 != r3)
	 * moves the new synchronization frame to the last non-repeating
	 * request (using the smallest frame number from the contiguous list of
	 * repeating requests).</li>
	 * <li>Submitting the same request repeatedly will not change this value
	 * to CONVERGING, if it was already a non-negative value.</li>
	 * <li>When this value changes to non-negative, that means that all of the
	 * metadata controls from the request have been applied, all of the
	 * metadata controls from the camera device have been read to the
	 * updated values (into the result), and all of the graphics buffers
	 * corresponding to this result are also synchronized to the request.</li>
	 * </ul>
	 * <p><em>Pipeline considerations</em>:</p>
	 * <p>Submitting a request with updated controls relative to the previously
	 * submitted requests may also invalidate the synchronization state
	 * of all the results corresponding to currently in-flight requests.</p>
	 * <p>In other words, results for this current request and up to
	 * ACAMERA_REQUEST_PIPELINE_MAX_DEPTH prior requests may have their
	 * ACAMERA_SYNC_FRAME_NUMBER change to CONVERGING.</p>
	 *
	 * @see ACAMERA_REQUEST_PIPELINE_MAX_DEPTH
	 * @see ACAMERA_SYNC_FRAME_NUMBER
	 */
	SYNC_FRAME_NUMBER MetadataTag = C.ACAMERA_SYNC_FRAME_NUMBER // int64 (acamera_metadata_enum_android_sync_frame_number_t)

	/**
	 * <p>The maximum number of frames that can occur after a request
	 * (different than the previous) has been submitted, and before the
	 * result's state becomes synchronized.</p>
	 *
	 * <p>Type: int32 (acamera_metadata_enum_android_sync_max_latency_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This defines the maximum distance (in number of metadata results),
	 * between the frame number of the request that has new controls to apply
	 * and the frame number of the result that has all the controls applied.</p>
	 * <p>In other words this acts as an upper boundary for how many frames
	 * must occur before the camera device knows for a fact that the new
	 * submitted camera settings have been applied in outgoing frames.</p>
	 */
	SYNC_MAX_LATENCY MetadataTag = C.ACAMERA_SYNC_MAX_LATENCY // int32 (acamera_metadata_enum_android_sync_max_latency_t)

	SYNC_END MetadataTag = C.ACAMERA_SYNC_END

	/**
	 * <p>The available depth dataspace stream
	 * configurations that this camera device supports
	 * (i.e. format, width, height, output/input stream).</p>
	 *
	 * <p>Type: int32[n*4] (acamera_metadata_enum_android_depth_available_depth_stream_configurations_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>These are output stream configurations for use with
	 * dataSpace HAL_DATASPACE_DEPTH. The configurations are
	 * listed as <code>(format, width, height, input?)</code> tuples.</p>
	 * <p>Only devices that support depth output for at least
	 * the HAL_PIXEL_FORMAT_Y16 dense depth map may include
	 * this entry.</p>
	 * <p>A device that also supports the HAL_PIXEL_FORMAT_BLOB
	 * sparse depth point cloud must report a single entry for
	 * the format in this list as <code>(HAL_PIXEL_FORMAT_BLOB,
	 * android.depth.maxDepthSamples, 1, OUTPUT)</code> in addition to
	 * the entries for HAL_PIXEL_FORMAT_Y16.</p>
	 */
	DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS MetadataTag = C.ACAMERA_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS // int32[n*4] (acamera_metadata_enum_android_depth_available_depth_stream_configurations_t)

	/**
	 * <p>This lists the minimum frame duration for each
	 * format/size combination for depth output formats.</p>
	 *
	 * <p>Type: int64[4*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>This should correspond to the frame duration when only that
	 * stream is active, with all processing (typically in android.*.mode)
	 * set to either OFF or FAST.</p>
	 * <p>When multiple streams are used in a request, the minimum frame
	 * duration will be max(individual stream min durations).</p>
	 * <p>The minimum frame duration of a stream (of a particular format, size)
	 * is the same regardless of whether the stream is input or output.</p>
	 * <p>See ACAMERA_SENSOR_FRAME_DURATION and
	 * ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS for more details about
	 * calculating the max frame rate.</p>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS
	 * @see ACAMERA_SENSOR_FRAME_DURATION
	 */
	DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS MetadataTag = C.ACAMERA_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS // int64[4*n]

	/**
	 * <p>This lists the maximum stall duration for each
	 * output format/size combination for depth streams.</p>
	 *
	 * <p>Type: int64[4*n]</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>A stall duration is how much extra time would get added
	 * to the normal minimum frame duration for a repeating request
	 * that has streams with non-zero stall.</p>
	 * <p>This functions similarly to
	 * ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS for depth
	 * streams.</p>
	 * <p>All depth output stream formats may have a nonzero stall
	 * duration.</p>
	 *
	 * @see ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS
	 */
	DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS MetadataTag = C.ACAMERA_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS // int64[4*n]

	/**
	 * <p>Indicates whether a capture request may target both a
	 * DEPTH16 / DEPTH_POINT_CLOUD output, and normal color outputs (such as
	 * YUV_420_888, JPEG, or RAW) simultaneously.</p>
	 *
	 * <p>Type: byte (acamera_metadata_enum_android_depth_depth_is_exclusive_t)</p>
	 *
	 * <p>This tag may appear in:
	 * <ul>
	 *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
	 * </ul></p>
	 *
	 * <p>If TRUE, including both depth and color outputs in a single
	 * capture request is not supported. An application must interleave color
	 * and depth requests.  If FALSE, a single request can target both types
	 * of output.</p>
	 * <p>Typically, this restriction exists on camera devices that
	 * need to emit a specific pattern or wavelength of light to
	 * measure depth values, which causes the color image to be
	 * corrupted during depth measurement.</p>
	 */
	DEPTH_DEPTH_IS_EXCLUSIVE MetadataTag = C.ACAMERA_DEPTH_DEPTH_IS_EXCLUSIVE // byte (acamera_metadata_enum_android_depth_depth_is_exclusive_t)

	DEPTH_END MetadataTag = C.ACAMERA_DEPTH_END
)

func (MetadataTag) String 

func (t MetadataTag) String() string

type MetadataTonemap_mode 

type MetadataTonemap_mode int

ACAMERA_TONEMAP_MODE

type MetadataTonemap_preset_curve 

type MetadataTonemap_preset_curve int

ACAMERA_TONEMAP_PRESET_CURVE

type OnCaptureBufferLost 

type OnCaptureBufferLost interface {
	OnCaptureBufferLost(*CaptureSession, *CaptureRequest, *app.Window, int64)
}

type OnCaptureCompleted 

type OnCaptureCompleted interface {
	OnCaptureCompleted(*CaptureSession, *CaptureRequest, *Metadata)
}

type OnCaptureFailed 

type OnCaptureFailed interface {
	OnCaptureFailed(*CaptureSession, *CaptureRequest, *CaptureFailure)
}

type OnCaptureProgressed 

type OnCaptureProgressed interface {
	OnCaptureProgressed(*CaptureSession, *CaptureRequest, *Metadata)
}

Capture Callbacks

type OnCaptureSequenceAborted 

type OnCaptureSequenceAborted interface {
	OnCaptureSequenceAborted(*CaptureSession, int)
}

type OnCaptureSequenceCompleted 

type OnCaptureSequenceCompleted interface {
	OnCaptureSequenceCompleted(*CaptureSession, int, int64)
}

type OnCaptureStarted 

type OnCaptureStarted interface {
	OnCaptureStarted(*CaptureSession, *CaptureRequest, time.Duration)
}

type OutputTarget 

type OutputTarget C.ACameraOutputTarget

Container for a single output target

func CameraOutputTargetCreate 

func CameraOutputTargetCreate(window *app.Window) (*OutputTarget, error)

*

  • Create a ACameraOutputTarget object. *
  • <p>The ACameraOutputTarget is used in {@link ACaptureRequest_addTarget} method to add an output
  • {@link ANativeWindow} to ACaptureRequest. Use {@link ACameraOutputTarget_free} to free the object
  • and its memory after application no longer needs the {@link ACameraOutputTarget}.</p> *
  • @param window the {@link ANativeWindow} to be associated with the {@link ACameraOutputTarget}
  • @param output the output {@link ACameraOutputTarget} will be stored here if the
  • method call succeeds. *
  • @return <ul>
  • <li>{@link ACAMERA_OK} if the method call succeeds. The created ACameraOutputTarget will
  • be filled in the output argument.</li>
  • <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if window or output is NULL.</li></ul> *
  • @see ACaptureRequest_addTarget

camera_status_t ACameraOutputTarget_create(ANativeWindow* window, ACameraOutputTarget** output);

func (*OutputTarget) Free 

func (output *OutputTarget) Free()

*

  • Free a ACameraOutputTarget object. *
  • @param output the {@link ACameraOutputTarget} to be freed. *
  • @see ACameraOutputTarget_create

void ACameraOutputTarget_free(ACameraOutputTarget* output);

type OutputTargets 

type OutputTargets C.ACameraOutputTargets

Container for output targets

type Type 

type Type int

*

  • Possible data types of a metadata entry. *
  • Keep in sync with system/media/include/system/camera_metadata.h
const (
	/// Unsigned 8-bit integer (uint8_t)
	TYPE_BYTE Type = C.ACAMERA_TYPE_BYTE
	/// Signed 32-bit integer (int32_t)
	TYPE_INT32 Type = C.ACAMERA_TYPE_INT32
	/// 32-bit float (float)
	TYPE_FLOAT Type = C.ACAMERA_TYPE_FLOAT
	/// Signed 64-bit integer (int64_t)
	TYPE_INT64 Type = C.ACAMERA_TYPE_INT64
	/// 64-bit float (double)
	TYPE_DOUBLE Type = C.ACAMERA_TYPE_DOUBLE
	/// A 64-bit fraction (ACameraMetadata_rational)
	TYPE_RATIONAL Type = C.ACAMERA_TYPE_RATIONAL
	/// Number of type fields
	NUM_TYPES = C.ACAMERA_NUM_TYPES
)

func (Type) String 

func (t Type) String() string

//

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.