asset

package
v1.0.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 12, 2024 License: BlueOak-1.0.0 Imports: 4 Imported by: 1

Documentation

Index

Constants

View Source 
const (
	CoinNotFoundError = dex.ErrorKind("coin not found")
	ErrRequestTimeout = dex.ErrorKind("request timeout")
)

CoinNotFoundError is to be returned from Contract, Redemption, and FundingCoin when the specified transaction cannot be found. Used by the server to handle network latency.

Variables

This section is empty.

Functions

func DecodeCoinID 

func DecodeCoinID(assetID uint32, coinID []byte) (string, error)

DecodeCoinID creates a human-readable representation of a coin ID for a named asset with a corresponding driver registered with this package.

func IsToken added in v0.5.0 

func IsToken(assetID uint32) (is bool, parentID uint32)

IsToken checks if the asset ID is for a token and returns the token's parent ID.

func Minimums added in v1.0.0 

func Minimums(assetID uint32, maxFeeRate uint64) (minLotSize, minBondSize uint64, found bool)

Minimums returns the minimimum lot size and bond size for a registered asset.

func Register 

func Register(assetID uint32, drv Driver)

Register should be called by the init function of an asset's package.

func RegisterToken added in v0.5.0 

func RegisterToken(assetID uint32, drv TokenDriver)

RegisterToken is called to register a token. The parent asset should be registered first.

func Tokens added in v0.5.0 

func Tokens(assetID uint32) map[uint32]*dex.Token

Tokens returns the child tokens registered for a base chain asset.

func UnitInfo added in v0.4.0 

func UnitInfo(assetID uint32) (dex.UnitInfo, error)

asset with a corresponding driver registered with this package.

func Version added in v0.2.0 

func Version(assetID uint32) (uint32, error)

Version retrieves the version of the named asset's Backend implementation.

Types

type AccountBalancer added in v0.5.0 

type AccountBalancer interface {
	// AccountBalance retrieves the current account balance.
	AccountBalance(addr string) (uint64, error)
	// ValidateSignature checks that the pubkey is correct for the address and
	// that the signature shows ownership of the associated private key.
	// IMPORTANT: As part of signature validation, the asset backend should
	// validate the address against a STRICT standard. Case, prefixes, suffixes,
	// etc. must be exactly the same order-to-order, since the address string
	// is used as a key for various accounting operations throughout DEX.
	ValidateSignature(addr string, pubkey, msg, sig []byte) error
	// RedeemSize is the gas used for a single redemption.
	RedeemSize() uint64
	InitTxSize() uint64
}

AccountBalancer is implemented by backends for account-based blockchains. An AccountBalancer reports the current balance for an account.

type BackedAsset 

type BackedAsset struct {
	dex.Asset
	Backend Backend
}

BackedAsset is a dex.Asset with a Backend.

type Backend 

type Backend interface {
	// It is expected that Connect from dex.Connector is called and returns
	// before use of the asset, and that it is only called once for the life
	// of the asset.
	dex.Connector
	// Contract returns a Contract only for outputs that would be spendable on
	// the blockchain immediately. Contract data (e.g. the redeem script for
	// UTXO assets) is required in order to calculate sigScript length and
	// verify pubkeys.
	Contract(coinID []byte, contractData []byte) (*Contract, error)
	// TxData fetches the raw transaction data for the specified coin.
	TxData(coinID []byte) ([]byte, error)
	// ValidateSecret checks that the secret satisfies the contract.
	ValidateSecret(secret, contractData []byte) bool
	// Redemption returns a Coin for redemptionID, a transaction input, that
	// spends contract ID, an output containing the swap contract.
	Redemption(redemptionID, contractID, contractData []byte) (Coin, error)
	// BlockChannel creates and returns a new channel on which to receive updates
	// when new blocks are connected.
	BlockChannel(size int) <-chan *BlockUpdate
	// CheckSwapAddress checks that the given address is parseable, and suitable
	// as a redeem address in a swap contract script or initiation.
	CheckSwapAddress(string) bool
	// ValidateCoinID checks the coinID to ensure it can be decoded, returning a
	// human-readable string if it is valid.
	// Note: ValidateCoinID is NOT used for funding coin IDs for account-based
	// assets. This rule is only enforced by code patterns right now, but we may
	// consider adding separate methods in the future.
	ValidateCoinID(coinID []byte) (string, error)
	// ValidateContract ensures that the swap contract is constructed properly
	// for the asset.
	ValidateContract(contract []byte) error
	// FeeRate returns the current optimal fee rate in atoms / byte.
	FeeRate(context.Context) (uint64, error)
	// Synced should return true when the blockchain is synced and ready for
	// fee rate estimation.
	Synced() (bool, error)
	// Info provides auxiliary information about a backend.
	Info() *BackendInfo
	// ValidateFeeRate checks that the transaction fees used to initiate the
	// contract are sufficient.
	ValidateFeeRate(coin Coin, reqFeeRate uint64) bool
}

Backend is a blockchain backend. TODO: Plumb every method with a cancellable request with a Context, which will prevent backend shutdown from cancelling requests, but is more idiomatic these days.

func Setup 

func Setup(cfg *BackendConfig) (Backend, error)

Setup sets up the named asset. The RPC connection parameters are obtained from the asset's configuration file located at configPath. Setup is only called for base chain assets, not tokens.

type BackendConfig added in v1.0.0 

type BackendConfig struct {
	AssetID    uint32
	ConfigPath string
	Logger     dex.Logger
	Net        dex.Network
	RelayAddr  string
}

type BackendInfo added in v0.5.0 

type BackendInfo struct {
	SupportsDynamicTxFee bool
}

BackendInfo provides auxiliary information about a backend.

type BlockUpdate 

type BlockUpdate struct {
	Err   error
	Reorg bool // TODO: Not used. Remove and update through btc and dcr. Don't really need the BlockUpdate struct at all.
}

BlockUpdate is sent over the update channel when a tip change is detected.

type Coin 

type Coin interface {
	// Confirmations returns the number of confirmations for a Coin's
	// transaction. Because a Coin can become invalid after once being
	// considered valid, this condition should be checked for during
	// confirmation counting and an error returned if this Coin is no longer
	// ready to spend. An unmined transaction should have zero confirmations. A
	// transaction in the current best block should have one confirmation. A
	// negative number can be returned if error is not nil.
	Confirmations(context.Context) (int64, error)
	// ID is the coin ID.
	ID() []byte
	// TxID is a transaction identifier for the coin.
	TxID() string
	// String is a human readable representation of the Coin.
	String() string
	// Value is the coin value.
	Value() uint64
	// FeeRate returns the transaction fee rate, in atoms/byte equivalent.
	FeeRate() uint64
}

Coin represents a transaction input or output.

type ConnectionError 

type ConnectionError error

ConnectionError error should be sent over the block update channel if a connection error is detected by the Backend.

func NewConnectionError 

func NewConnectionError(s string, a ...any) ConnectionError

NewConnectionError is a constructor for a ConnectionError.

type Contract 

type Contract struct {
	Coin
	// SwapAddress is the receiving address of the swap contract.
	SwapAddress string
	// ContractData is essential data about this swap. For example, the redeem
	// script for UTXO contracts, or a secret hash that keys swaps for account-
	// based contracts.
	ContractData []byte
	// SecretHash is the secret key hash used for this swap. This should be used
	// to validate a counterparty contract on another chain.
	SecretHash []byte
	// LockTime is the refund locktime.
	LockTime time.Time
	// TxData is raw transaction data. This data is provided for some assets
	// to aid in SPV compatibility.
	TxData []byte
}

Contract is an atomic swap contract.

type Driver 

type Driver interface {

	// Setup should create a Backend, but not start the backend connection.
	Setup(*BackendConfig) (Backend, error)
	// contains filtered or unexported methods
}

Driver is the interface required of all base chain assets.

type FundingCoin 

type FundingCoin interface {
	Coin() Coin
	// Auth checks that the owner of the provided pubkeys can spend the
	// FundingCoin. The signatures (sigs) generated with the private keys
	// corresponding to pubkeys must validate against the pubkeys and signing
	// message (msg).
	Auth(pubkeys, sigs [][]byte, msg []byte) error
	// SpendSize returns the size of the serialized input that spends this
	// FundingCoin.
	SpendSize() uint32
}

FundingCoin is some unspent value on the blockchain.

type OutputTracker added in v0.5.0 

type OutputTracker interface {
	// VerifyUnspentCoin attempts to verify a coin ID by decoding the coin ID
	// and retrieving the corresponding Coin. If the coin is not found or no
	// longer unspent, an asset.CoinNotFoundError is returned. Use FundingCoin
	// for more UTXO data.
	VerifyUnspentCoin(ctx context.Context, coinID []byte) error
	// FundingCoin returns the unspent coin at the specified location. Coins
	// with non-standard pkScripts or scripts that require zero signatures to
	// redeem must return an error.
	FundingCoin(ctx context.Context, coinID []byte, redeemScript []byte) (FundingCoin, error)
	// ValidateOrderFunding validates that the supplied utxos are enough to fund an order.
	ValidateOrderFunding(swapVal, valSum, inputCount, inputsSize, maxSwaps uint64, nfo *dex.Asset) bool
}

OutputTracker is implemented by backends for UTXO-based blockchains. OutputTracker tracks the value and spend-status of transaction outputs.

type RegisteredAsset added in v1.0.0 

type RegisteredAsset struct {
	AssetID  uint32
	Symbol   string
	Name     string
	UnitInfo dex.UnitInfo
}

RegisteredAsset is information about a registered asset.

func Assets added in v1.0.0 

func Assets() []*RegisteredAsset

Assets returns a information about registered assets.

type TokenBacker added in v0.5.0 

type TokenBacker interface {
	TokenBackend(assetID uint32, configPath string) (Backend, error)
}

TokenBacker is implemented by Backends that support degenerate tokens.

type TokenDriver added in v0.5.0 

type TokenDriver interface {
	TokenInfo() *dex.Token
	// contains filtered or unexported methods
}

TokenDriver is the interface required of all token assets.

Source Files

View all Source files

Directories

Path Synopsis
Package eth implements methods to work with ethereum swap contracts and transactions.
 Package eth implements methods to work with ethereum swap contracts and transactions.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.