x/slashing
Abstract
This section specifies the slashing module of the Cosmos SDK, which implements functionality
first outlined in the Cosmos Whitepaper in June 2016.
The slashing module enables Cosmos SDK-based blockchains to disincentivize any attributable action
by a protocol-recognized actor with value at stake by penalizing them ("slashing").
Penalties may include, but are not limited to:
- Burning some amount of their stake
- Removing their ability to vote on future blocks for a period of time.
This module will be used by the Cosmos Hub, the first hub in the Cosmos ecosystem.
Contents
Concepts
States
At any given time, there are any number of validators registered in the state
machine. Each block, the top MaxValidators
(defined by x/staking
) validators
who are not jailed become bonded, meaning that they may propose and vote on
blocks. Validators who are bonded are at stake, meaning that part or all of
their stake and their delegators' stake is at risk if they commit a protocol fault.
For each of these validators we keep a ValidatorSigningInfo
record that contains
information pertaining to validator's liveness and other infraction related
attributes.
Tombstone Caps
In order to mitigate the impact of initially likely categories of non-malicious
protocol faults, the Cosmos Hub implements for each validator
a tombstone cap, which only allows a validator to be slashed once for a double
sign fault. For example, if you misconfigure your HSM and double-sign a bunch of
old blocks, you'll only be punished for the first double-sign (and then immediately tombstombed). This will still be quite expensive and desirable to avoid, but tombstone caps
somewhat blunt the economic impact of unintentional misconfiguration.
Liveness faults do not have caps, as they can't stack upon each other. Liveness bugs are "detected" as soon as the infraction occurs, and the validators are immediately put in jail, so it is not possible for them to commit multiple liveness faults without unjailing in between.
Infraction Timelines
To illustrate how the x/slashing
module handles submitted evidence through
CometBFT consensus, consider the following examples:
Definitions:
[ : timeline start
] : timeline end
Cn : infraction n
committed
Dn : infraction n
discovered
Vb : validator bonded
Vu : validator unbonded
Single Double Sign Infraction
[----------C1----D1,Vu-----]
A single infraction is committed then later discovered, at which point the
validator is unbonded and slashed at the full amount for the infraction.
Multiple Double Sign Infractions
[----------C1--C2---C3---D1,D2,D3Vu-----]
Multiple infractions are committed and then later discovered, at which point the
validator is jailed and slashed for only one infraction. Because the validator
is also tombstoned, they can not rejoin the validator set.
State
Signing Info (Liveness)
Every block includes a set of precommits by the validators for the previous block,
known as the LastCommitInfo
provided by CometBFT. A LastCommitInfo
is valid so
long as it contains precommits from +2/3 of total voting power.
Proposers are incentivized to include precommits from all validators in the CometBFT LastCommitInfo
by receiving additional fees proportional to the difference between the voting
power included in the LastCommitInfo
and +2/3 (see fee distribution).
type LastCommitInfo struct {
Round int32
Votes []VoteInfo
}
Validators are penalized for failing to be included in the LastCommitInfo
for some
number of blocks by being automatically jailed, potentially slashed, and unbonded.
Information about validator's liveness activity is tracked through ValidatorSigningInfo
.
It is indexed in the store as follows:
- ValidatorSigningInfo:
0x01 | ConsAddrLen (1 byte) | ConsAddress -> ProtocolBuffer(ValSigningInfo)
- MissedBlocksBitArray:
0x02 | ConsAddrLen (1 byte) | ConsAddress | LittleEndianUint64(signArrayIndex) -> VarInt(didMiss)
(varint is a number encoding format)
The first mapping allows us to easily lookup the recent signing info for a
validator based on the validator's consensus address.
The second mapping (MissedBlocksBitArray
) acts
as a bit-array of size SignedBlocksWindow
that tells us if the validator missed
the block for a given index in the bit-array. The index in the bit-array is given
as little endian uint64.
The result is a varint
that takes on 0
or 1
, where 0
indicates the
validator did not miss (did sign) the corresponding block, and 1
indicates
they missed the block (did not sign).
Note that the MissedBlocksBitArray
is not explicitly initialized up-front. Keys
are added as we progress through the first SignedBlocksWindow
blocks for a newly
bonded validator. The SignedBlocksWindow
parameter defines the size
(number of blocks) of the sliding window used to track validator liveness.
The information stored for tracking validator liveness is as follows:
https://github.com/cosmos/cosmos-sdk/blob/v0.52.0-beta.1/x/slashing/proto/cosmos/slashing/v1beta1/slashing.proto#L13-L35
Params
The slashing module stores its params in state with the prefix of 0x00
,
it can be updated with governance or the address with authority.
- Params:
0x00 | ProtocolBuffer(Params)
https://github.com/cosmos/cosmos-sdk/blob/v0.52.0-beta.1/x/slashing/proto/cosmos/slashing/v1beta1/slashing.proto#L37-L62
Messages
In this section we describe the processing of messages for the slashing
module.
Unjail
If a validator was automatically unbonded due to downtime and wishes to come back online &
possibly rejoin the bonded set, it must send MsgUnjail
:
// MsgUnjail is an sdk.Msg used for unjailing a jailed validator, thus returning
// them into the bonded validator set, so they can begin receiving provisions
// and rewards again.
message MsgUnjail {
string validator_addr = 1;
}
Below is a pseudocode of the MsgSrv/Unjail
RPC:
unjail(tx MsgUnjail)
validator = getValidator(tx.ValidatorAddr)
if validator == nil
fail with "No validator found"
if getSelfDelegation(validator) == 0
fail with "validator must self delegate before unjailing"
if !validator.Jailed
fail with "Validator not jailed, cannot unjail"
info = GetValidatorSigningInfo(operator)
if info.Tombstoned
fail with "Tombstoned validator cannot be unjailed"
if block time < info.JailedUntil
fail with "Validator still jailed, cannot unjail until period has expired"
validator.Jailed = false
setValidator(validator)
return
If the validator has enough stake to be in the top n = MaximumBondedValidators
, it will be automatically rebonded,
and all delegators still delegated to the validator will be rebonded and begin to again collect
provisions and rewards.
BeginBlock
Liveness Tracking
At the beginning of each block, we update the ValidatorSigningInfo
for each
validator and check if they've crossed below the liveness threshold over a
sliding window. This sliding window is defined by SignedBlocksWindow
and the
index in this window is determined by (height - SignInfo.StartHeight
).
Notice that the position in the sliding window is incremented every block,
independent of whether the validator signed or not.
Once the index is determined, the MissedBlocksBitArray
and
MissedBlocksCounter
are updated accordingly.
Finally, in order to determine if a validator crosses below the liveness threshold,
we fetch the maximum number of blocks missed, maxMissed
, which is
SignedBlocksWindow - (MinSignedPerWindow * SignedBlocksWindow)
and the minimum
height at which we can determine liveness, minHeight
. If the current block is
greater than minHeight
and the validator's MissedBlocksCounter
is greater than
maxMissed
, they will be slashed by SlashFractionDowntime
, will be jailed
for DowntimeJailDuration
, and have the following values reset:
MissedBlocksBitArray
, MissedBlocksCounter
, and IndexOffset
.
Note: Liveness slashes do NOT lead to a tombstombing.
height := block.Height
for vote in block.LastCommitInfo.Votes {
signInfo := GetValidatorSigningInfo(vote.Validator.Address)
// This is a relative index, so we counts blocks the validator SHOULD have
// signed. We use the 0-value default signing info if not present.
index := (height - signInfo.StartHeight) % SignedBlocksWindow()
// Update MissedBlocksBitArray and MissedBlocksCounter. The MissedBlocksCounter
// just tracks the sum of MissedBlocksBitArray. That way we avoid needing to
// read/write the whole array each time.
missedPrevious := GetValidatorMissedBlockBitArray(vote.Validator.Address, index)
missed := !signed
switch {
case !missedPrevious && missed:
// array index has changed from not missed to missed, increment counter
SetValidatorMissedBlockBitArray(vote.Validator.Address, index, true)
signInfo.MissedBlocksCounter++
case missedPrevious && !missed:
// array index has changed from missed to not missed, decrement counter
SetValidatorMissedBlockBitArray(vote.Validator.Address, index, false)
signInfo.MissedBlocksCounter--
default:
// array index at this index has not changed; no need to update counter
}
if missed {
// emit events...
}
minHeight := signInfo.StartHeight + SignedBlocksWindow()
maxMissed := SignedBlocksWindow() - MinSignedPerWindow()
// If we are past the minimum height and the validator has missed too many
// jail and slash them.
if height > minHeight && signInfo.MissedBlocksCounter > maxMissed {
validator := ValidatorByConsAddr(vote.Validator.Address)
// emit events...
// We need to retrieve the stake distribution which signed the block, so we
// subtract ValidatorUpdateDelay from the block height, and subtract an
// additional 1 since this is the LastCommit.
//
// Note, that this CAN result in a negative "distributionHeight" up to
// -ValidatorUpdateDelay-1, i.e. at the end of the pre-genesis block (none) = at the beginning of the genesis block.
// That's fine since this is just used to filter unbonding delegations & redelegations.
distributionHeight := height - sdk.ValidatorUpdateDelay - 1
SlashWithInfractionReason(vote.Validator.Address, distributionHeight, vote.Validator.Power, SlashFractionDowntime(), stakingtypes.Downtime)
Jail(vote.Validator.Address)
signInfo.JailedUntil = block.Time.Add(DowntimeJailDuration())
// We need to reset the counter & array so that the validator won't be
// immediately slashed for downtime upon rebonding.
signInfo.MissedBlocksCounter = 0
signInfo.IndexOffset = 0
ClearValidatorMissedBlockBitArray(vote.Validator.Address)
}
SetValidatorSigningInfo(vote.Validator.Address, signInfo)
}
Hooks
This section contains a description of the module's hooks
. Hooks are operations that are executed automatically when events are raised.
Staking hooks
The slashing module implements the StakingHooks
defined in x/staking
and are used as record-keeping of validators information. During the app initialization, these hooks should be registered in the staking module struct.
The following hooks impact the slashing state:
AfterValidatorBonded
creates a ValidatorSigningInfo
instance as described in the following section.
AfterValidatorCreated
stores a validator's consensus key.
AfterValidatorRemoved
removes a validator's consensus key.
AfterConsensusPubKeyUpdate
handles the rotation of signing info and updates the address-pubkey relation after a consensus key update.
Validator Bonded
Upon successful first-time bonding of a new validator, we create a new ValidatorSigningInfo
structure for the
now-bonded validator, which StartHeight
of the current block.
If the validator was out of the validator set and gets bonded again, its new bonded height is set.
onValidatorBonded(address sdk.ValAddress)
signingInfo, found = GetValidatorSigningInfo(address)
if !found {
signingInfo = ValidatorSigningInfo {
StartHeight : CurrentHeight,
IndexOffset : 0,
JailedUntil : time.Unix(0, 0),
Tombstone : false,
MissedBloskCounter : 0
} else {
signingInfo.StartHeight = CurrentHeight
}
setValidatorSigningInfo(signingInfo)
}
return
Events
The slashing module emits the following events:
MsgServer
MsgUnjail
Type |
Attribute Key |
Attribute Value |
message |
module |
slashing |
message |
sender |
{validatorAddress} |
Keeper
BeginBlocker: HandleValidatorSignature
Type |
Attribute Key |
Attribute Value |
slash |
address |
{validatorConsensusAddress} |
slash |
power |
{validatorPower} |
slash |
reason |
{slashReason} |
slash |
jailed [0] |
{validatorConsensusAddress} |
slash |
burned coins |
{math.Int} |
- [0] Only included if the validator is jailed.
Type |
Attribute Key |
Attribute Value |
liveness |
address |
{validatorConsensusAddress} |
liveness |
missed_blocks |
{missedBlocksCounter} |
liveness |
height |
{blockHeight} |
Slash
- same as
"slash"
event from HandleValidatorSignature
, but without the jailed
attribute.
Jail
Type |
Attribute Key |
Attribute Value |
slash |
jailed |
{validatorAddress} |
Staking Tombstone
Abstract
In the current implementation of the slashing
module, when the consensus engine
informs the state machine of a validator's consensus fault, the validator is
partially slashed, and put into a "jail period", a period of time in which they
are not allowed to rejoin the validator set. However, because of the nature of
consensus faults and ABCI, there can be a delay between an infraction occurring,
and evidence of the infraction reaching the state machine (this is one of the
primary reasons for the existence of the unbonding period).
Note: The tombstone concept, only applies to faults that have a delay between
the infraction occurring and evidence reaching the state machine. For example,
evidence of a validator double signing may take a while to reach the state machine
due to unpredictable evidence gossip layer delays and the ability of validators to
selectively reveal double-signatures (e.g. to infrequently-online light clients).
Liveness slashing, on the other hand, is detected immediately as soon as the
infraction occurs, and therefore no slashing period is needed. A validator is
immediately put into jail period, and they cannot commit another liveness fault
until they unjail. In the future, there may be other types of byzantine faults
that have delays (for example, submitting evidence of an invalid proposal as a transaction).
When implemented, it will have to be decided whether these future types of
byzantine faults will result in a tombstoning (and if not, the slash amounts
will not be capped by a slashing period).
In the current system design, once a validator is put in the jail for a consensus
fault, after the JailPeriod
they are allowed to send a transaction to unjail
themselves, and thus rejoin the validator set.
One of the "design desires" of the slashing
module is that if multiple
infractions occur before evidence is executed (and a validator is put in jail),
they should only be punished for single worst infraction, but not cumulatively.
For example, if the sequence of events is:
- Validator A commits Infraction 1 (worth 30% slash)
- Validator A commits Infraction 2 (worth 40% slash)
- Validator A commits Infraction 3 (worth 35% slash)
- Evidence for Infraction 1 reaches state machine (and validator is put in jail)
- Evidence for Infraction 2 reaches state machine
- Evidence for Infraction 3 reaches state machine
Only Infraction 2 should have its slash take effect, as it is the highest. This
is done, so that in the case of the compromise of a validator's consensus key,
they will only be punished once, even if the hacker double-signs many blocks.
Because, the unjailing has to be done with the validator's operator key, they
have a chance to re-secure their consensus key, and then signal that they are
ready using their operator key. We call this period during which we track only
the max infraction, the "slashing period".
Once, a validator rejoins by unjailing themselves, we begin a new slashing period;
if they commit a new infraction after unjailing, it gets slashed cumulatively on
top of the worst infraction from the previous slashing period.
However, while infractions are grouped based off of the slashing periods, because
evidence can be submitted up to an unbondingPeriod
after the infraction, we
still have to allow for evidence to be submitted for previous slashing periods.
For example, if the sequence of events is:
- Validator A commits Infraction 1 (worth 30% slash)
- Validator A commits Infraction 2 (worth 40% slash)
- Evidence for Infraction 1 reaches state machine (and Validator A is put in jail)
- Validator A unjails
We are now in a new slashing period, however we still have to keep the door open
for the previous infraction, as the evidence for Infraction 2 may still come in.
As the number of slashing periods increase, it creates more complexity as we have
to keep track of the highest infraction amount for every single slashing period.
Note: Currently, according to the slashing
module spec, a new slashing period
is created every time a validator is unbonded then rebonded. This should probably
be changed to jailed/unjailed. See issue #3205
for further details. For the remainder of this, I will assume that we only start
a new slashing period when a validator gets unjailed.
The maximum number of slashing periods is the len(UnbondingPeriod) / len(JailPeriod)
.
The current defaults in Gaia for the UnbondingPeriod
and JailPeriod
are 3 weeks
and 2 days, respectively. This means there could potentially be up to 11 slashing
periods concurrently being tracked per validator. If we set the JailPeriod >= UnbondingPeriod
,
we only have to track 1 slashing period (i.e not have to track slashing periods).
Currently, in the jail period implementation, once a validator unjails, all of
their delegators who are delegated to them (haven't unbonded / redelegated away),
stay with them. Given that consensus safety faults are so egregious
(way more so than liveness faults), it is probably prudent to have delegators not
"auto-rebond" to the validator.
Proposal: infinite jail
We propose setting the "jail time" for a
validator who commits a consensus safety fault, to infinite
(i.e. a tombstone state).
This essentially kicks the validator out of the validator set and does not allow
them to re-enter the validator set. All of their delegators (including the operator themselves)
have to either unbond or redelegate away. The validator operator can create a new
validator if they would like, with a new operator key and consensus key, but they
have to "re-earn" their delegations back.
Implementing the tombstone system and getting rid of the slashing period tracking
will make the slashing
module way simpler, especially because we can remove all
of the hooks defined in the slashing
module consumed by the staking
module
(the slashing
module still consumes hooks defined in staking
).
Single slashing amount
Another optimization that can be made is that if we assume that all ABCI faults
for CometBFT consensus are slashed at the same level, we don't have to keep
track of "max slash". Once an ABCI fault happens, we don't have to worry about
comparing potential future ones to find the max.
Currently the only CometBFT ABCI fault is:
- Unjustified precommits (double signs)
It is currently planned to include the following fault in the near future:
- Signing a precommit when you're in unbonding phase (needed to make light client bisection safe)
Given that these faults are both attributable byzantine faults, we will likely
want to slash them equally, and thus we can enact the above change.
Note: This change may make sense for current CometBFT consensus, but maybe
not for a different consensus algorithm or future versions of CometBFT that
may want to punish at different levels (for example, partial slashing).
Parameters
The slashing module contains the following parameters:
Key |
Type |
Example |
SignedBlocksWindow |
string (int64) |
"100" |
MinSignedPerWindow |
string (dec) |
"0.500000000000000000" |
DowntimeJailDuration |
string (ns) |
"600000000000" |
SlashFractionDoubleSign |
string (dec) |
"0.050000000000000000" |
SlashFractionDowntime |
string (dec) |
"0.010000000000000000" |
CLI
A user can query and interact with the slashing
module using the CLI.
Query
The query
commands allow users to query slashing
state.
simd query slashing --help
params
The params
command allows users to query genesis parameters for the slashing module.
simd query slashing params [flags]
Example:
simd query slashing params
Example Output:
downtime_jail_duration: 600s
min_signed_per_window: "0.500000000000000000"
signed_blocks_window: "100"
slash_fraction_double_sign: "0.050000000000000000"
slash_fraction_downtime: "0.010000000000000000"
signing-info
The signing-info
command allows users to query signing-info of the validator using consensus public key.
simd query slashing signing-infos [flags]
Example:
simd query slashing signing-info '{"@type":"/cosmos.crypto.ed25519.PubKey","key":"Auxs3865HpB/EfssYOzfqNhEJjzys6jD5B6tPgC8="}'
Example Output:
address: cosmosvalcons1nrqsld3aw6lh6t082frdqc84uwxn0t958c
index_offset: "2068"
jailed_until: "1970-01-01T00:00:00Z"
missed_blocks_counter: "0"
start_height: "0"
tombstoned: false
signing-infos
The signing-infos
command allows users to query signing infos of all validators.
simd query slashing signing-infos [flags]
Example:
simd query slashing signing-infos
Example Output:
info:
- address: cosmosvalcons1nrqsld3aw6lh6t082frdqc84uwxn0t958c
index_offset: "2075"
jailed_until: "1970-01-01T00:00:00Z"
missed_blocks_counter: "0"
start_height: "0"
tombstoned: false
pagination:
next_key: null
total: "0"
Transactions
The tx
commands allow users to interact with the slashing
module.
simd tx slashing --help
unjail
The unjail
command allows users to unjail a validator previously jailed for downtime.
simd tx slashing unjail --from mykey [flags]
Example:
simd tx slashing unjail --from mykey
update-params-proposal
The update-params-proposal
command allows users to submit a governance proposal to update the slashing module parameters:
simd tx slashing update-params-proposal <params> [flags]
Example:
simd tx slashing update-params-proposal '{ "signed_blocks_window": "100" }'
gRPC
A user can query the slashing
module using gRPC endpoints.
Params
The Params
endpoint allows users to query the parameters of slashing module.
cosmos.slashing.v1beta1.Query/Params
Example:
grpcurl -plaintext localhost:9090 cosmos.slashing.v1beta1.Query/Params
Example Output:
{
"params": {
"signedBlocksWindow": "100",
"minSignedPerWindow": "NTAwMDAwMDAwMDAwMDAwMDAw",
"downtimeJailDuration": "600s",
"slashFractionDoubleSign": "NTAwMDAwMDAwMDAwMDAwMDA=",
"slashFractionDowntime": "MTAwMDAwMDAwMDAwMDAwMDA="
}
}
SigningInfo
The SigningInfo queries the signing info of given cons address.
cosmos.slashing.v1beta1.Query/SigningInfo
Example:
grpcurl -plaintext -d '{"cons_address":"cosmosvalcons1nrqsld3aw6lh6t082frdqc84uwxn0t958c"}' localhost:9090 cosmos.slashing.v1beta1.Query/SigningInfo
Example Output:
{
"valSigningInfo": {
"address": "cosmosvalcons1nrqsld3aw6lh6t082frdqc84uwxn0t958c",
"indexOffset": "3493",
"jailedUntil": "1970-01-01T00:00:00Z"
}
}
SigningInfos
The SigningInfos queries signing info of all validators.
cosmos.slashing.v1beta1.Query/SigningInfos
Example:
grpcurl -plaintext localhost:9090 cosmos.slashing.v1beta1.Query/SigningInfos
Example Output:
{
"info": [
{
"address": "cosmosvalcons1nrqslkwd3pz096lh6t082frdqc84uwxn0t958c",
"indexOffset": "2467",
"jailedUntil": "1970-01-01T00:00:00Z"
}
],
"pagination": {
"total": "1"
}
}
REST
A user can query the slashing
module using REST endpoints.
Params
/cosmos/slashing/v1beta1/params
Example:
curl "localhost:1317/cosmos/slashing/v1beta1/params"
Example Output:
{
"params": {
"signed_blocks_window": "100",
"min_signed_per_window": "0.500000000000000000",
"downtime_jail_duration": "600s",
"slash_fraction_double_sign": "0.050000000000000000",
"slash_fraction_downtime": "0.010000000000000000"
}
signing_info
/cosmos/slashing/v1beta1/signing_infos/%s
Example:
curl "localhost:1317/cosmos/slashing/v1beta1/signing_infos/cosmosvalcons1nrqslkwd3pz096lh6t082frdqc84uwxn0t958c"
Example Output:
{
"val_signing_info": {
"address": "cosmosvalcons1nrqslkwd3pz096lh6t082frdqc84uwxn0t958c",
"start_height": "0",
"index_offset": "4184",
"jailed_until": "1970-01-01T00:00:00Z",
"tombstoned": false,
"missed_blocks_counter": "0"
}
}
signing_infos
/cosmos/slashing/v1beta1/signing_infos
Example:
curl "localhost:1317/cosmos/slashing/v1beta1/signing_infos
Example Output:
{
"info": [
{
"address": "cosmosvalcons1nrqslkwd3pz096lh6t082frdqc84uwxn0t958c",
"start_height": "0",
"index_offset": "4169",
"jailed_until": "1970-01-01T00:00:00Z",
"tombstoned": false,
"missed_blocks_counter": "0"
}
],
"pagination": {
"next_key": null,
"total": "1"
}
}