proxyguard

README

ProxyGuard

Proxy UDP connections over HTTP(s). The main use case is to proxy WireGuard packets.

Goal

The goal of this project is NOT to work around intentional state/organizational network blocks/censorship. We developed ProxyGuard to work on networks that are misconfigured. For example on networks where UDP is blocked, or there is an issue with the MTU. Therefore, ProxyGuard currently does not do any advanced anti-censorship tricks, it is merely a proxy for UDP traffic. This keeps the codebase simple.

Dependencies

• Go (target: >= 1.19)

Building

Run: make

NOTE: You can build static binaries with CGO_ENABLED=0 make

Installing

Run:

$ sudo make install

This will install the daemons under /usr/local and add the systemd service files. Do not forget to run systemctl daemon-reload. After that you can start the proxyguard-server and proxyguard-client services.

To configure them, use e.g. systemctl edit proxyguard-server and override the variables you see there with your own values as needed, for example if WireGuard is listening on port 443, you can add the following:

[Service]
Environment=TO=127.0.0.1:443

DEB/RPM packages

Currently there are DEB/RPM packages available in eduVPN's server repository, follow the eduVPN docs to add the repo.

And then install ProxyGuard using: sudo apt -y install proxyguard-client or sudo dnf -y install proxyguard-client

Running

This tool is focused on a client-server model. This proxy thus needs to run for every client and for a server. The server mode accepts multiple clients.

Client example

This example listens on local UDP port 51821, expects packets from UDP port 51820 (WireGuard listen port) and forwards TCP packets (with a HTTP Upgrade handshake) to vpn.example.com

proxyguard-client --to http://vpn.example.com

NOTE: If you test the client on Linux, you might also need to add --fwmark 51820 (or some other number that the WG connection configures) to mark that the packets going out of this proxy are encrypted, preventing a routing loop. 51820 is the default for WireGuard. Note that this needs root or the binary needs CAP_NET_ADMIN.

NOTE: In case HTTPS is used, the client only allows servers with TLS >= 1.3

To then use this with WireGuard, you need to change the endpoint in the WireGuard config and make sure the listen port is set

[Interface]
PrivateKey = ...
Address = ...
DNS = ...
ListenPort = 51820

[Peer]
PublicKey = ...
AllowedIPs = ...
Endpoint = 127.0.0.1:51821

Server example

This example starts a HTTP server on TCP port 51821 and forwards UDP packets to localhost 51820, the WireGuard port.

proxyguard-server --listen 0.0.0.0:51821 --to 127.0.0.1:51820

Deployment

For details on deployment, see here.

Technical docs

For technical docs, see here.

Acknowledgements & Thanks

The following projects gave me an idea how I could implement this best, most notably how to do the UDP <-> TCP conversion with a custom header. This project started with a UDP to TCP approach, but later moved to HTTP for use behind a reverse proxy and improved obfuscation.

• https://github.com/mullvad/udp-over-tcp
• https://github.com/rfc1036/udptunnel
• https://nhooyr.io/websocket

License

MIT

Documentation

Index

• Constants
• Variables
• func Server(ctx context.Context, listen string, to string) error
• func UpdateLogger(l Logger)
• func Version() string
• type Client
  • func (c *Client) SetupDNS(ctx context.Context) error
  • func (c *Client) Tunnel(ctx context.Context, wglisten int) error
• type Logger

Constants

const UpgradeProto = "UoTLV/1"

UpgradeProto is the protocol used in HTTP Upgrade UoTLV/1 is UDP over TCP Length Value version 1

Variables

var ErrReaderTimeout = errors.New("TCP reader timeout reached")

Functions

func Server

func Server(ctx context.Context, listen string, to string) error

Server creates a server that forwards TCP to UDP wgp is the WireGuard port tcpp is the TCP listening port to is the IP:PORT string

func UpdateLogger

func UpdateLogger(l Logger)

func Version

func Version() string

Version() gets the version in the following order: - Gets a release version if it detects it is a release - Gets the commit using debug info - Returns a default

Types

type Client

type Client struct {
	// Listen is the PORT for the UDP listener
	ListenPort int

	// TCPSourcePort is the source port for the TCP connection
	TCPSourcePort int

	// Fwmark sets the SO_MARK to use
	// Set to 0 or negative to disable
	// This is only set on Linux
	Fwmark int

	// Peer is the peer to connect to
	Peer string

	// PeerIPS is the list of DNS resolved IPs for the Peer
	// You may leave this empty and automatically resolve PeerIPs using
	// `SetupDNS`
	PeerIPS []string

	// SetupSocket is called when the socket is setting up
	// fd is the file descriptor of the socket
	SetupSocket func(fd int)

	// UserAgent is the HTTP user agent to use for HTTP requests
	UserAgent string
}

Client represents a ProxyGuard client

func (*Client) SetupDNS

func (c *Client) SetupDNS(ctx context.Context) error

func (*Client) Tunnel

func (c *Client) Tunnel(ctx context.Context, wglisten int) error

Tunnel tunnels a connection from wireguard connection port `wglisten`

type Logger

type Logger interface {
	Log(_ string)
	Logf(_ string, _ ...interface{})
}