ofctrl

package

v0.14.0 Latest Latest Go to latest Published: Oct 8, 2024 License: Apache-2.0 Imports: 19 Imported by: 9

Details

Valid go.mod file
Redistributable license
Tagged version
Stable version
Learn more about best practices

Repository

github.com/antrea-io/ofnet

Links

Open Source Insights

README ¶

Ofctrl

This library implements a simple Openflow1.3 controller API

Usage

// Create a controller
ctrler := ofctrl.NewController(&app)

// Listen for connections
ctrler.Listen(":6633")

This creates a new controller and registers the app for event callbacks. The app needs to implement following interface to get callbacks when an openflow switch connects to the controller.

type AppInterface interface {
    // A Switch connected to the controller
    SwitchConnected(sw *OFSwitch)

    // Switch disconnected from the controller
    SwitchDisconnected(sw *OFSwitch)

    // Controller received a packet from the switch
    PacketRcvd(sw *OFSwitch, pkt *PacketIn)
}

Example app

type OfApp struct {
    Switch *ofctrl.OFSwitch
}

func (o *OfApp) PacketRcvd(sw *ofctrl.OFSwitch, packet *openflow15.PacketIn) {
    log.Printf("App: Received packet: %+v", packet)
}

func (o *OfApp) SwitchConnected(sw *ofctrl.OFSwitch) {
    log.Printf("App: Switch connected: %v", sw.DPID())

    // Store switch for later use
    o.Switch = sw
}

func (o *OfApp) SwitchDisconnected(sw *ofctrl.OFSwitch) {
    log.Printf("App: Switch connected: %v", sw.DPID())
}

// Main app
var app OfApp

// Create a controller
ctrler := ofctrl.NewController(&app)

// start listening
ctrler.Listen(":6633")

Working with OpenVswitch

Command to make ovs connect to controller:

ovs-vsctl set-controller <bridge-name> tcp:<ip-addr>:<port>

Example:

sudo ovs-vsctl set-controller ovsbr0 tcp:127.0.0.1:6633

To enable openflow1.3 support in OVS:

ovs-vsctl set bridge <bridge-name> protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13

Example:

sudo ovs-vsctl set bridge ovsbr0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13

Forwarding Graph API

An app can install flow table entries into the Openflow switch by using forwarding graph API. Forwarding graph is made up of forwarding elements which determine how a packet lookups are done. Forwarding graph is a higher level interface that is converted to Openflow1.3 flows, instructions, groups and actions by the library

Forwarding graph is specific to each switch. It is roughly structured as follows

         +------------+
         | Controller |
         +------------+
                |
      +---------+---------+
      |                   |
 +----------+        +----------+
 | Switch 1 |        | Switch 2 |
 +----------+        +----------+
       |
       +--------------+---------------+
       |              |               |
       V              V
 +---------+      +---------+     +---------+
 | Table 1 |  +-->| Table 2 |  +->| Table 3 |
 +---------+  |   +---------+  |  +---------+
      |       |        |       |      |
 +---------+  |   +---------+  |  +--------+     +------+
 | Flow 1  +--+   | Flow 1  +--+  | Flow 1 +---->| Drop |
 +---------+      +---------+     +--------+     +------+
      |
 +---------+            +----------+
 | Flow 2  +----------->+ OutPut 1 |
 +---------+            +----------+
      |
 +---------+                 +----------+
 | Flow 3  +---------------->| Output 2 |
 +---------+                 +----------+
      |                            ^
 +---------+       +---------+     |      +----------+
 | Flow 4  +------>| Flood 1 +-----+----->| Output 3 |
 +---------+       +---------+     |      +----------+
      |                            |
 +---------+     +-----------+     |      +----------+
 | Flow 5  +---->| Multipath |     +----->| Output 4 |
 +---------+     +-----+-----+            +----------+
                       |
          +------------+-------------+
          |            |             |
    +----------+  +----------+  +----------+
    | Output 5 |  | Output 6 |  | Output 7 |
    +----------+  +----------+  +----------+

Forwarding graph is made up of Fgraph elements. Currently there are four kinds of elements.

1. Table - Represents a flow table
2. Flow - Represents a specific flow
3. Output - Represents an output action either drop or send it on a port
4. Flood - Represents flood to list of ports

In future we will support an additional type.

5. Multipath - Represents load balancing across a set of ports

Forwarding Graph elements are linked together as follows

Each Switch has a set of Tables. Switch has a special DefaultTable where all packet lookups start.
Each Table contains list of Flows. Each Flow has a Match condition which determines the packets that match the flow and a NextElem which it points to
A Flow can point to following elements
1. Table - This moves the forwarding lookup to specified table
2. Output - This causes the packet to be sent out or dropped
3. Flood - This causes the packet to be flooded to list of ports
4. Multipath - This causes packet to be load balanced across set of ports. This can be used for link aggregation and ECMP
There are three kinds of outputs
1. drop - which causes the packet to be dropped
2. toController - sends the packet to controller
3. port - sends the packet out of specified port. Tunnels like Vxlan VTEP are also represented as ports.
A flow can have additional actions like:
1. Set Vlan tag
2. Set metadata Which is used for setting VRF for a packet
3. Set VNI/tunnel header etc

Example usage:

     // Find the switch we want to operate on
     switch := app.Switch

     // Create all tables
     rxVlanTbl := switch.NewTable(1)
     macSaTable := switch.NewTable(2)
     macDaTable := switch.NewTable(3)
     ipTable := switch.NewTable(4)
     inpTable := switch.DefaultTable() // table 0. i.e starting table

     // Discard mcast source mac
     dscrdMcastSrc := inpTable.NewFlow(FlowMatch{
                                      &McastSrc: { 0x01, 0, 0, 0, 0, 0 }
                                      &McastSrcMask: { 0x01, 0, 0, 0, 0, 0 }
                                      }, 100)
     dscrdMcastSrc.Next(switch.DropAction())

     // All valid packets go to vlan table
     validInputPkt := inpTable.NewFlow(FlowMatch{}, 1)
     validInputPkt.Next(rxVlanTbl)

     // Set access vlan for port 1 and go to mac lookup
     tagPort := rxVlanTbl.NewFlow(FlowMatch{
                                  InputPort: Port(1)
                                  }, 100)
     tagPort.SetVlan(10)
     tagPort.Next(macSaTable)

     // Match on IP dest addr and forward to a port
     ipFlow := ipTable.NewFlow(FlowParams{
                               Ethertype: 0x0800,
                               IpDa: &net.IPv4("10.10.10.10")
                              }, 100)

     outPort := switch.NewOutputPort(10)
     ipFlow.Next(outPort)