Directories
¶
| Path | Synopsis |
|---|---|
|
Connects to an APA102 SPI RGB LED strip with 30 LEDS.
|
Connects to an APA102 SPI RGB LED strip with 30 LEDS. |
|
itsybitsy-m0
This example demostrates how to control the "Dotstar" (APA102) LED included on the Adafruit Itsy Bitsy M0 board.
|
This example demostrates how to control the "Dotstar" (APA102) LED included on the Adafruit Itsy Bitsy M0 board. |
|
apds9960
|
|
|
axp192
|
|
|
Connects to an BlinkM I2C RGB LED.
|
Connects to an BlinkM I2C RGB LED. |
|
ds1307
|
|
|
Connects to an MAG3110 I2C magnetometer.
|
Connects to an MAG3110 I2C magnetometer. |
|
espat
|
|
|
espconsole
This is a console to a ESP8266/ESP32 running on the device UART1.
|
This is a console to a ESP8266/ESP32 running on the device UART1. |
|
esphub
This is a sensor hub that uses a ESP8266/ESP32 running on the device UART1.
|
This is a sensor hub that uses a ESP8266/ESP32 running on the device UART1. |
|
espstation
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
mqttclient
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
mqttsub
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
tcpclient
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
flash
|
|
|
ft6336
|
|
|
gps
|
|
|
hd44780
|
|
|
i2csoft
|
|
|
ili9341
|
|
|
pyportal_boing
Port of Adafruit's "pyportal_boing" demo found here: https://github.com/adafruit/Adafruit_ILI9341/blob/master/examples/pyportal_boing
|
Port of Adafruit's "pyportal_boing" demo found here: https://github.com/adafruit/Adafruit_ILI9341/blob/master/examples/pyportal_boing |
|
l293x
|
|
|
l9110x
|
|
|
Connects to a LIS3DH I2C accelerometer on the Adafruit Circuit Playground Express.
|
Connects to a LIS3DH I2C accelerometer on the Adafruit Circuit Playground Express. |
|
lora
|
|
|
lorawan/atcmd
AT command set console running on the device UART to communicate with an attached LoRa device.
|
AT command set console running on the device UART to communicate with an attached LoRa device. |
|
lorawan/basic-demo
Simple code for connecting to Lorawan network and uploading sample payload
|
Simple code for connecting to Lorawan network and uploading sample payload |
|
Connects to an LSM6DS3 I2C a 6 axis Inertial Measurement Unit (IMU)
|
Connects to an LSM6DS3 I2C a 6 axis Inertial Measurement Unit (IMU) |
|
Connects to an LSM6DS3TR I2C a 6 axis Inertial Measurement Unit (IMU)
|
Connects to an LSM6DS3TR I2C a 6 axis Inertial Measurement Unit (IMU) |
|
Connects to an LSM6DSOX I2C a 6 axis Inertial Measurement Unit (IMU)
|
Connects to an LSM6DSOX I2C a 6 axis Inertial Measurement Unit (IMU) |
|
LSM9DS1, 9 axis Inertial Measurement Unit (IMU)
|
LSM9DS1, 9 axis Inertial Measurement Unit (IMU) |
|
Connects to an MAG3110 I2C magnetometer.
|
Connects to an MAG3110 I2C magnetometer. |
|
This example demonstrates putting several mcp23017 devices together into a single virtual I/O array.
|
This example demonstrates putting several mcp23017 devices together into a single virtual I/O array. |
|
Connects to a MCP3008 ADC via SPI.
|
Connects to a MCP3008 ADC via SPI. |
|
Example using the i2s hardware interface on the Adafruit Circuit Playground Express to read data from the onboard MEMS microphone.
|
Example using the i2s hardware interface on the Adafruit Circuit Playground Express to read data from the onboard MEMS microphone. |
|
Connects to an MMA8653 I2C accelerometer.
|
Connects to an MMA8653 I2C accelerometer. |
|
Connects to an MPU6050 I2C accelerometer/gyroscope.
|
Connects to an MPU6050 I2C accelerometer/gyroscope. |
|
Connects to an MPU6886 I2C accelerometer/gyroscope.
|
Connects to an MPU6886 I2C accelerometer/gyroscope. |
|
Connects to an MPU9150 I2C accelerometer/gyroscope.
|
Connects to an MPU9150 I2C accelerometer/gyroscope. |
|
pcd8544
|
|
|
pcf8563
|
|
|
Connects to an QMI8658C I2C accelerometer/gyroscope and print the read data.
|
Connects to an QMI8658C I2C accelerometer/gyroscope and print the read data. |
|
rtl8720dn
|
|
|
mqttclient
This is a sensor station that uses a RTL8720DN running on the device UART2.
|
This is a sensor station that uses a RTL8720DN running on the device UART2. |
|
mqttsub
This is a sensor station that uses a RTL8720DN running on the device UART2.
|
This is a sensor station that uses a RTL8720DN running on the device UART2. |
|
ntpclient
This is an example of using the rtl8720dn driver to implement a NTP client.
|
This is an example of using the rtl8720dn driver to implement a NTP client. |
|
tcpclient
This example opens a TCP connection using a device with RTL8720DN firmware and sends some data, for the purpose of testing speed and connectivity.
|
This example opens a TCP connection using a device with RTL8720DN firmware and sends some data, for the purpose of testing speed and connectivity. |
|
sdcard
|
|
|
This example is designed to implement the button shifter for a PyBadge.
|
This example is designed to implement the button shifter for a PyBadge. |
|
ssd1306
|
|
|
sx126x
|
|
|
sx127x
|
|
|
This example uses the settings for the thermistor that is built in to the Adafruit Circuit Playground Express.
|
This example uses the settings for the thermistor that is built in to the Adafruit Circuit Playground Express. |
|
touch
|
|
|
resistive/fourwire
demo of 4-wire touchscreen as described in app note: http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf
|
demo of 4-wire touchscreen as described in app note: http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf |
|
waveshare-epd
|
|
|
wifi
|
|
|
tcpclient
This example opens a TCP connection and sends some data, for the purpose of testing speed and connectivity.
|
This example opens a TCP connection and sends some data, for the purpose of testing speed and connectivity. |
|
wifinina
|
|
|
connect
This example connects to Access Point and prints some info
|
This example connects to Access Point and prints some info |
|
http-get
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example:
|
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example: |
|
mqttclient
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
mqttsub
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
|
This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1. |
|
ntpclient
This is an example of using the wifinina driver to implement a NTP client.
|
This is an example of using the wifinina driver to implement a NTP client. |
|
tcpclient
This example opens a TCP connection using a device with WiFiNINA firmware and sends some data, for the purpose of testing speed and connectivity.
|
This example opens a TCP connection using a device with WiFiNINA firmware and sends some data, for the purpose of testing speed and connectivity. |
|
tlsclient
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTPS request to retrieve a webpage
|
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTPS request to retrieve a webpage |
|
udpstation
This is a sensor station that uses a ESP32 running nina-fw over SPI.
|
This is a sensor station that uses a ESP32 running nina-fw over SPI. |
|
webclient
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example:
|
This example opens a TCP connection using a device with WiFiNINA firmware and sends a HTTP request to retrieve a webpage, based on the following Arduino example: |
|
Connects to an WS2812 RGB LED strip with 10 LEDS.
|
Connects to an WS2812 RGB LED strip with 10 LEDS. |
Click to show internal directories.
Click to hide internal directories.