p2p

package
v0.29.1-rc0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 24, 2019 License: Apache-2.0 Imports: 27 Imported by: 0

README

p2p

The p2p package provides an abstraction around peer-to-peer communication.

Docs:

  • Connection for details on how connections and multiplexing work
  • Peer for details on peer ID, handshakes, and peer exchange
  • Node for details about different types of nodes and how they should work
  • Pex for details on peer discovery and exchange
  • Config for details on some config option

Documentation

Index

Constants

View Source 
const IDByteLength = crypto.AddressSize

IDByteLength is the length of a crypto.Address. Currently only 20. TODO: support other length addresses ?

View Source 
const (
	// MetricsSubsystem is a subsystem shared by all metrics exposed by this
	// package.
	MetricsSubsystem = "p2p"
)
View Source 
const TEST_HOST = "localhost"

Variables

This section is empty.

Functions

func AddPeerToSwitch added in v0.19.7 

func AddPeerToSwitch(sw *Switch, peer Peer)

func Connect2Switches 

func Connect2Switches(switches []*Switch, i, j int)

Connect2Switches will connect switches i and j via net.Pipe(). Blocks until a connection is established. NOTE: caller ensures i and j are within bounds.

func CreateRandomPeer added in v0.19.7 

func CreateRandomPeer(outbound bool) *peer

func FuzzConn 

func FuzzConn(conn net.Conn) net.Conn

FuzzConn creates a new FuzzedConnection. Fuzzing starts immediately.

func FuzzConnAfter 

func FuzzConnAfter(conn net.Conn, d time.Duration) net.Conn

FuzzConnAfter creates a new FuzzedConnection. Fuzzing starts when the duration elapses.

func FuzzConnAfterFromConfig 

func FuzzConnAfterFromConfig(
	conn net.Conn,
	d time.Duration,
	config *config.FuzzConnConfig,
) net.Conn

FuzzConnAfterFromConfig creates a new FuzzedConnection from a config. Fuzzing starts when the duration elapses.

func FuzzConnFromConfig 

func FuzzConnFromConfig(conn net.Conn, config *config.FuzzConnConfig) net.Conn

FuzzConnFromConfig creates a new FuzzedConnection from a config. Fuzzing starts immediately.

func IDAddressString added in v0.19.7 

func IDAddressString(id ID, protocolHostPort string) string

IDAddressString returns id@hostPort. It strips the leading protocol from protocolHostPort if it exists.

func MConnConfig 

func MConnConfig(cfg *config.P2PConfig) conn.MConnConfig

MConnConfig returns an MConnConfig with fields updated from the P2PConfig.

func MakePoWTarget added in v0.19.7 

func MakePoWTarget(difficulty, targetBits uint) []byte

MakePoWTarget returns the big-endian encoding of 2^(targetBits - difficulty) - 1. It can be used as a Proof of Work target. NOTE: targetBits must be a multiple of 8 and difficulty must be less than targetBits.

func MaxNodeInfoSize added in v0.19.7 

func MaxNodeInfoSize() int

Max size of the NodeInfo struct

func NewConnSet added in v0.26.0 

func NewConnSet() *connSet

NewConnSet returns a ConnSet implementation.

func StartSwitches 

func StartSwitches(switches []*Switch) error

StartSwitches calls sw.Start() for each given switch. It returns the first encountered error.

Types

type AddrBook 

type AddrBook interface {
	AddAddress(addr *NetAddress, src *NetAddress) error
	AddOurAddress(*NetAddress)
	OurAddress(*NetAddress) bool
	MarkGood(*NetAddress)
	RemoveAddress(*NetAddress)
	HasAddress(*NetAddress) bool
	Save()
}

An AddrBook represents an address book from the pex package, which is used to store peer addresses.

type BaseReactor 

type BaseReactor struct {
	cmn.BaseService // Provides Start, Stop, .Quit
	Switch          *Switch
}

func NewBaseReactor 

func NewBaseReactor(name string, impl Reactor) *BaseReactor

func (*BaseReactor) AddPeer 

func (*BaseReactor) AddPeer(peer Peer)

func (*BaseReactor) GetChannels 

func (*BaseReactor) GetChannels() []*conn.ChannelDescriptor

func (*BaseReactor) Receive 

func (*BaseReactor) Receive(chID byte, peer Peer, msgBytes []byte)

func (*BaseReactor) RemovePeer 

func (*BaseReactor) RemovePeer(peer Peer, reason interface{})

func (*BaseReactor) SetSwitch 

func (br *BaseReactor) SetSwitch(sw *Switch)

type ChannelDescriptor 

type ChannelDescriptor = conn.ChannelDescriptor

type ConnFilterFunc added in v0.26.0 

type ConnFilterFunc func(ConnSet, net.Conn, []net.IP) error

ConnFilterFunc to be implemented by filter hooks after a new connection has been established. The set of exisiting connections is passed along together with all resolved IPs for the new connection.

func ConnDuplicateIPFilter added in v0.26.0 

func ConnDuplicateIPFilter() ConnFilterFunc

ConnDuplicateIPFilter resolves and keeps all ips for an incoming connection and refuses new ones if they come from a known ip.

type ConnSet added in v0.26.0 

type ConnSet interface {
	Has(net.Conn) bool
	HasIP(net.IP) bool
	Set(net.Conn, []net.IP)
	Remove(net.Conn)
	RemoveAddr(net.Addr)
}

ConnSet is a lookup table for connections and all their ips.

type ConnectionStatus 

type ConnectionStatus = conn.ConnectionStatus

type DefaultNodeInfo added in v0.26.0 

type DefaultNodeInfo struct {
	ProtocolVersion ProtocolVersion `json:"protocol_version"`

	// Authenticate
	// TODO: replace with NetAddress
	ID_        ID     `json:"id"`          // authenticated identifier
	ListenAddr string `json:"listen_addr"` // accepting incoming

	// Check compatibility.
	// Channels are HexBytes so easier to read as JSON
	Network  string       `json:"network"`  // network/chain ID
	Version  string       `json:"version"`  // major.minor.revision
	Channels cmn.HexBytes `json:"channels"` // channels this node knows about

	// ASCIIText fields
	Moniker string               `json:"moniker"` // arbitrary moniker
	Other   DefaultNodeInfoOther `json:"other"`   // other application specific data
}

DefaultNodeInfo is the basic node information exchanged between two peers during the Tendermint P2P handshake.

func (DefaultNodeInfo) CompatibleWith added in v0.26.0 

func (info DefaultNodeInfo) CompatibleWith(other_ NodeInfo) error

CompatibleWith checks if two DefaultNodeInfo are compatible with eachother. CONTRACT: two nodes are compatible if the Block version and network match and they have at least one channel in common.

func (DefaultNodeInfo) ID added in v0.26.0 

func (info DefaultNodeInfo) ID() ID

ID returns the node's peer ID.

func (*DefaultNodeInfo) Marshal added in v0.27.4 

func (info *DefaultNodeInfo) Marshal() ([]byte, error)

Marshal returns the amino encoding.

func (*DefaultNodeInfo) MarshalTo added in v0.27.4 

func (info *DefaultNodeInfo) MarshalTo(data []byte) (int, error)

MarshalTo calls Marshal and copies to the given buffer.

func (DefaultNodeInfo) NetAddress added in v0.26.0 

func (info DefaultNodeInfo) NetAddress() *NetAddress

NetAddress returns a NetAddress derived from the DefaultNodeInfo - it includes the authenticated peer ID and the self-reported ListenAddr. Note that the ListenAddr is not authenticated and may not match that address actually dialed if its an outbound peer.

func (*DefaultNodeInfo) Size added in v0.27.4 

func (info *DefaultNodeInfo) Size() int

Size returns the size of the amino encoding, in bytes.

func (*DefaultNodeInfo) Unmarshal added in v0.27.4 

func (info *DefaultNodeInfo) Unmarshal(bs []byte) error

Unmarshal deserializes from amino encoded form.

func (DefaultNodeInfo) Validate added in v0.27.4 

func (info DefaultNodeInfo) Validate() error

Validate checks the self-reported DefaultNodeInfo is safe. It returns an error if there are too many Channels, if there are any duplicate Channels, if the ListenAddr is malformed, or if the ListenAddr is a host name that can not be resolved to some IP. TODO: constraints for Moniker/Other? Or is that for the UI ? JAE: It needs to be done on the client, but to prevent ambiguous unicode characters, maybe it's worth sanitizing it here. In the future we might want to validate these, once we have a name-resolution system up. International clients could then use punycode (or we could use url-encoding), and we just need to be careful with how we handle that in our clients. (e.g. off by default).

type DefaultNodeInfoOther added in v0.26.0 

type DefaultNodeInfoOther struct {
	TxIndex    string `json:"tx_index"`
	RPCAddress string `json:"rpc_address"`
}

DefaultNodeInfoOther is the misc. applcation specific data

type ErrFilterTimeout added in v0.26.0 

type ErrFilterTimeout struct{}

ErrFilterTimeout indicates that a filter operation timed out.

func (ErrFilterTimeout) Error added in v0.26.0 

func (e ErrFilterTimeout) Error() string

type ErrNetAddressInvalid added in v0.19.7 

type ErrNetAddressInvalid struct {
	Addr string
	Err  error
}

func (ErrNetAddressInvalid) Error added in v0.19.7 

func (e ErrNetAddressInvalid) Error() string

type ErrNetAddressLookup added in v0.19.7 

type ErrNetAddressLookup struct {
	Addr string
	Err  error
}

func (ErrNetAddressLookup) Error added in v0.19.7 

func (e ErrNetAddressLookup) Error() string

type ErrNetAddressNoID added in v0.19.7 

type ErrNetAddressNoID struct {
	Addr string
}

func (ErrNetAddressNoID) Error added in v0.19.7 

func (e ErrNetAddressNoID) Error() string

type ErrRejected added in v0.26.0 

type ErrRejected struct {
	// contains filtered or unexported fields
}

ErrRejected indicates that a Peer was rejected carrying additional information as to the reason.

func (ErrRejected) Addr added in v0.26.0 

func (e ErrRejected) Addr() NetAddress

Addr returns the NetAddress for the rejected Peer.

func (ErrRejected) Error added in v0.26.0 

func (e ErrRejected) Error() string

func (ErrRejected) IsAuthFailure added in v0.26.0 

func (e ErrRejected) IsAuthFailure() bool

IsAuthFailure when Peer authentication was unsuccessful.

func (ErrRejected) IsDuplicate added in v0.26.0 

func (e ErrRejected) IsDuplicate() bool

IsDuplicate when Peer ID or IP are present already.

func (ErrRejected) IsFiltered added in v0.26.0 

func (e ErrRejected) IsFiltered() bool

IsFiltered when Peer ID or IP was filtered.

func (ErrRejected) IsIncompatible added in v0.26.0 

func (e ErrRejected) IsIncompatible() bool

IsIncompatible when Peer NodeInfo is not compatible with our own.

func (ErrRejected) IsNodeInfoInvalid added in v0.26.0 

func (e ErrRejected) IsNodeInfoInvalid() bool

IsNodeInfoInvalid when the sent NodeInfo is not valid.

func (ErrRejected) IsSelf added in v0.26.0 

func (e ErrRejected) IsSelf() bool

IsSelf when Peer is our own node.

type ErrSwitchAuthenticationFailure added in v0.19.7 

type ErrSwitchAuthenticationFailure struct {
	Dialed *NetAddress
	Got    ID
}

func (ErrSwitchAuthenticationFailure) Error added in v0.19.7 

func (e ErrSwitchAuthenticationFailure) Error() string

type ErrSwitchConnectToSelf added in v0.19.7 

type ErrSwitchConnectToSelf struct {
	Addr *NetAddress
}

ErrSwitchConnectToSelf to be raised when trying to connect to itself.

func (ErrSwitchConnectToSelf) Error added in v0.19.7 

func (e ErrSwitchConnectToSelf) Error() string

type ErrSwitchDuplicatePeerID added in v0.19.7 

type ErrSwitchDuplicatePeerID struct {
	ID ID
}

ErrSwitchDuplicatePeerID to be raised when a peer is connecting with a known ID.

func (ErrSwitchDuplicatePeerID) Error added in v0.19.7 

func (e ErrSwitchDuplicatePeerID) Error() string

type ErrSwitchDuplicatePeerIP added in v0.19.7 

type ErrSwitchDuplicatePeerIP struct {
	IP net.IP
}

ErrSwitchDuplicatePeerIP to be raised whena a peer is connecting with a known IP.

func (ErrSwitchDuplicatePeerIP) Error added in v0.19.7 

func (e ErrSwitchDuplicatePeerIP) Error() string

type ErrTransportClosed added in v0.26.0 

type ErrTransportClosed struct{}

ErrTransportClosed is raised when the Transport has been closed.

func (ErrTransportClosed) Error added in v0.26.0 

func (e ErrTransportClosed) Error() string

type FuzzedConnection 

type FuzzedConnection struct {
	// contains filtered or unexported fields
}

FuzzedConnection wraps any net.Conn and depending on the mode either delays reads/writes or randomly drops reads/writes/connections.

func (*FuzzedConnection) Close 

func (fc *FuzzedConnection) Close() error

Close implements net.Conn.

func (*FuzzedConnection) Config 

func (fc *FuzzedConnection) Config() *config.FuzzConnConfig

Config returns the connection's config.

func (*FuzzedConnection) LocalAddr 

func (fc *FuzzedConnection) LocalAddr() net.Addr

LocalAddr implements net.Conn.

func (*FuzzedConnection) Read 

func (fc *FuzzedConnection) Read(data []byte) (n int, err error)

Read implements net.Conn.

func (*FuzzedConnection) RemoteAddr 

func (fc *FuzzedConnection) RemoteAddr() net.Addr

RemoteAddr implements net.Conn.

func (*FuzzedConnection) SetDeadline 

func (fc *FuzzedConnection) SetDeadline(t time.Time) error

SetDeadline implements net.Conn.

func (*FuzzedConnection) SetReadDeadline 

func (fc *FuzzedConnection) SetReadDeadline(t time.Time) error

SetReadDeadline implements net.Conn.

func (*FuzzedConnection) SetWriteDeadline 

func (fc *FuzzedConnection) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements net.Conn.

func (*FuzzedConnection) Write 

func (fc *FuzzedConnection) Write(data []byte) (n int, err error)

Write implements net.Conn.

type ID added in v0.19.7 

type ID string

ID is a hex-encoded crypto.Address

func PubKeyToID added in v0.19.7 

func PubKeyToID(pubKey crypto.PubKey) ID

PubKeyToID returns the ID corresponding to the given PubKey. It's the hex-encoding of the pubKey.Address().

type IPResolver added in v0.26.0 

type IPResolver interface {
	LookupIPAddr(context.Context, string) ([]net.IPAddr, error)
}

IPResolver is a behaviour subset of net.Resolver.

type IPeerSet 

type IPeerSet interface {
	Has(key ID) bool
	HasIP(ip net.IP) bool
	Get(key ID) Peer
	List() []Peer
	Size() int
}

IPeerSet has a (immutable) subset of the methods of PeerSet.

type Metrics added in v0.26.0 

type Metrics struct {
	// Number of peers.
	Peers metrics.Gauge
	// Number of bytes received from a given peer.
	PeerReceiveBytesTotal metrics.Counter
	// Number of bytes sent to a given peer.
	PeerSendBytesTotal metrics.Counter
	// Pending bytes to be sent to a given peer.
	PeerPendingSendBytes metrics.Gauge
	// Number of transactions submitted by each peer.
	NumTxs metrics.Gauge
}

Metrics contains metrics exposed by this package.

func NopMetrics added in v0.26.0 

func NopMetrics() *Metrics

NopMetrics returns no-op Metrics.

func PrometheusMetrics added in v0.26.0 

func PrometheusMetrics(namespace string, labelsAndValues ...string) *Metrics

PrometheusMetrics returns Metrics build using Prometheus client library. Optionally, labels can be provided along with their values ("foo", "fooValue").

type MultiplexTransport added in v0.26.0 

type MultiplexTransport struct {
	// contains filtered or unexported fields
}

MultiplexTransport accepts and dials tcp connections and upgrades them to multiplexed peers.

func NewMultiplexTransport added in v0.26.0 

func NewMultiplexTransport(
	nodeInfo NodeInfo,
	nodeKey NodeKey,
	mConfig conn.MConnConfig,
) *MultiplexTransport

NewMultiplexTransport returns a tcp connected multiplexed peer.

func (*MultiplexTransport) Accept added in v0.26.0 

func (mt *MultiplexTransport) Accept(cfg peerConfig) (Peer, error)

Accept implements Transport.

func (*MultiplexTransport) Cleanup added in v0.29.2 

func (mt *MultiplexTransport) Cleanup(peer Peer)

Cleanup removes the given address from the connections set and closes the connection.

func (*MultiplexTransport) Close added in v0.26.0 

func (mt *MultiplexTransport) Close() error

Close implements transportLifecycle.

func (*MultiplexTransport) Dial added in v0.26.0 

func (mt *MultiplexTransport) Dial(
	addr NetAddress,
	cfg peerConfig,
) (Peer, error)

Dial implements Transport.

func (*MultiplexTransport) Listen added in v0.26.0 

func (mt *MultiplexTransport) Listen(addr NetAddress) error

Listen implements transportLifecycle.

type MultiplexTransportOption added in v0.26.0 

type MultiplexTransportOption func(*MultiplexTransport)

MultiplexTransportOption sets an optional parameter on the MultiplexTransport.

func MultiplexTransportConnFilters added in v0.26.0 

func MultiplexTransportConnFilters(
	filters ...ConnFilterFunc,
) MultiplexTransportOption

MultiplexTransportConnFilters sets the filters for rejection new connections.

func MultiplexTransportFilterTimeout added in v0.26.0 

func MultiplexTransportFilterTimeout(
	timeout time.Duration,
) MultiplexTransportOption

MultiplexTransportFilterTimeout sets the timeout waited for filter calls to return.

func MultiplexTransportResolver added in v0.26.0 

func MultiplexTransportResolver(resolver IPResolver) MultiplexTransportOption

MultiplexTransportResolver sets the Resolver used for ip lokkups, defaults to net.DefaultResolver.

type NetAddress 

type NetAddress struct {
	ID   ID     `json:"id"`
	IP   net.IP `json:"ip"`
	Port uint16 `json:"port"`
	// contains filtered or unexported fields
}

NetAddress defines information about a peer on the network including its ID, IP address, and port.

func CreateRoutableAddr added in v0.19.7 

func CreateRoutableAddr() (addr string, netAddr *NetAddress)

func NewNetAddress 

func NewNetAddress(id ID, addr net.Addr) *NetAddress

NewNetAddress returns a new NetAddress using the provided TCP address. When testing, other net.Addr (except TCP) will result in using 0.0.0.0:0. When normal run, other net.Addr (except TCP) will panic. TODO: socks proxies?

func NewNetAddressIPPort 

func NewNetAddressIPPort(ip net.IP, port uint16) *NetAddress

NewNetAddressIPPort returns a new NetAddress using the provided IP and port number.

func NewNetAddressString 

func NewNetAddressString(addr string) (*NetAddress, error)

NewNetAddressString returns a new NetAddress using the provided address in the form of "ID@IP:Port". Also resolves the host if host is not an IP. Errors are of type ErrNetAddressXxx where Xxx is in (NoID, Invalid, Lookup)

func NewNetAddressStringWithOptionalID added in v0.19.7 

func NewNetAddressStringWithOptionalID(addr string) (*NetAddress, error)

NewNetAddressStringWithOptionalID returns a new NetAddress using the provided address in the form of "ID@IP:Port", where the ID is optional. Also resolves the host if host is not an IP.

func NewNetAddressStrings 

func NewNetAddressStrings(addrs []string) ([]*NetAddress, []error)

NewNetAddressStrings returns an array of NetAddress'es build using the provided strings.

func (*NetAddress) Dial 

func (na *NetAddress) Dial() (net.Conn, error)

Dial calls net.Dial on the address.

func (*NetAddress) DialString added in v0.19.7 

func (na *NetAddress) DialString() string

func (*NetAddress) DialTimeout 

func (na *NetAddress) DialTimeout(timeout time.Duration) (net.Conn, error)

DialTimeout calls net.DialTimeout on the address.

func (*NetAddress) Equals 

func (na *NetAddress) Equals(other interface{}) bool

Equals reports whether na and other are the same addresses, including their ID, IP, and Port.

func (*NetAddress) HasID added in v0.27.4 

func (na *NetAddress) HasID() bool

HasID returns true if the address has an ID. NOTE: It does not check whether the ID is valid or not.

func (*NetAddress) Local 

func (na *NetAddress) Local() bool

Local returns true if it is a local address.

func (*NetAddress) RFC1918 

func (na *NetAddress) RFC1918() bool

func (*NetAddress) RFC3849 

func (na *NetAddress) RFC3849() bool

func (*NetAddress) RFC3927 

func (na *NetAddress) RFC3927() bool

func (*NetAddress) RFC3964 

func (na *NetAddress) RFC3964() bool

func (*NetAddress) RFC4193 

func (na *NetAddress) RFC4193() bool

func (*NetAddress) RFC4380 

func (na *NetAddress) RFC4380() bool

func (*NetAddress) RFC4843 

func (na *NetAddress) RFC4843() bool

func (*NetAddress) RFC4862 

func (na *NetAddress) RFC4862() bool

func (*NetAddress) RFC6052 

func (na *NetAddress) RFC6052() bool

func (*NetAddress) RFC6145 

func (na *NetAddress) RFC6145() bool

func (*NetAddress) ReachabilityTo 

func (na *NetAddress) ReachabilityTo(o *NetAddress) int

ReachabilityTo checks whenever o can be reached from na.

func (*NetAddress) Routable 

func (na *NetAddress) Routable() bool

Routable returns true if the address is routable.

func (*NetAddress) Same added in v0.19.7 

func (na *NetAddress) Same(other interface{}) bool

Same returns true is na has the same non-empty ID or DialString as other.

func (*NetAddress) String 

func (na *NetAddress) String() string

String representation: <ID>@<IP>:<PORT>

func (*NetAddress) Valid 

func (na *NetAddress) Valid() bool

For IPv4 these are either a 0 or all bits set address. For IPv6 a zero address or one that matches the RFC3849 documentation address format.

type NodeInfo 

type NodeInfo interface {
	// contains filtered or unexported methods
}

NodeInfo exposes basic info of a node and determines if we're compatible.

type NodeKey added in v0.19.7 

type NodeKey struct {
	PrivKey crypto.PrivKey `json:"priv_key"` // our priv key
}

NodeKey is the persistent peer key. It contains the nodes private key for authentication.

func LoadNodeKey added in v0.19.7 

func LoadNodeKey(filePath string) (*NodeKey, error)

func LoadOrGenNodeKey added in v0.19.7 

func LoadOrGenNodeKey(filePath string) (*NodeKey, error)

LoadOrGenNodeKey attempts to load the NodeKey from the given filePath. If the file does not exist, it generates and saves a new NodeKey.

func (*NodeKey) ID added in v0.19.7 

func (nodeKey *NodeKey) ID() ID

ID returns the peer's canonical ID - the hash of its public key.

func (*NodeKey) PubKey added in v0.19.7 

func (nodeKey *NodeKey) PubKey() crypto.PubKey

PubKey returns the peer's PubKey

type Peer 

type Peer interface {
	cmn.Service
	FlushStop()

	ID() ID               // peer's cryptographic ID
	RemoteIP() net.IP     // remote IP of the connection
	RemoteAddr() net.Addr // remote address of the connection

	IsOutbound() bool   // did we dial the peer
	IsPersistent() bool // do we redial this peer when we disconnect

	CloseConn() error // close original connection

	NodeInfo() NodeInfo // peer's info
	Status() tmconn.ConnectionStatus
	OriginalAddr() *NetAddress // original address for outbound peers

	Send(byte, []byte) bool
	TrySend(byte, []byte) bool

	Set(string, interface{})
	Get(string) interface{}
}

Peer is an interface representing a peer connected on a reactor.

type PeerFilterFunc added in v0.26.0 

type PeerFilterFunc func(IPeerSet, Peer) error

PeerFilterFunc to be implemented by filter hooks after a new Peer has been fully setup.

type PeerOption added in v0.26.0 

type PeerOption func(*peer)

func PeerMetrics added in v0.26.0 

func PeerMetrics(metrics *Metrics) PeerOption

type PeerSet 

type PeerSet struct {
	// contains filtered or unexported fields
}

PeerSet is a special structure for keeping a table of peers. Iteration over the peers is super fast and thread-safe.

func NewPeerSet 

func NewPeerSet() *PeerSet

NewPeerSet creates a new peerSet with a list of initial capacity of 256 items.

func (*PeerSet) Add 

func (ps *PeerSet) Add(peer Peer) error

Add adds the peer to the PeerSet. It returns an error carrying the reason, if the peer is already present.

func (*PeerSet) Get 

func (ps *PeerSet) Get(peerKey ID) Peer

Get looks up a peer by the provided peerKey. Returns nil if peer is not found.

func (*PeerSet) Has 

func (ps *PeerSet) Has(peerKey ID) bool

Has returns true if the set contains the peer referred to by this peerKey, otherwise false.

func (*PeerSet) HasIP added in v0.19.7 

func (ps *PeerSet) HasIP(peerIP net.IP) bool

HasIP returns true if the set contains the peer referred to by this IP address, otherwise false.

func (*PeerSet) List 

func (ps *PeerSet) List() []Peer

List returns the threadsafe list of peers.

func (*PeerSet) Remove 

func (ps *PeerSet) Remove(peer Peer) bool

Remove discards peer by its Key, if the peer was previously memoized. Returns true if the peer was removed, and false if it was not found. in the set.

func (*PeerSet) Size 

func (ps *PeerSet) Size() int

Size returns the number of unique items in the peerSet.

type ProtocolVersion added in v0.26.0 

type ProtocolVersion struct {
	P2P   version.Protocol `json:"p2p"`
	Block version.Protocol `json:"block"`
	App   version.Protocol `json:"app"`
}

ProtocolVersion contains the protocol versions for the software.

func NewProtocolVersion added in v0.26.0 

func NewProtocolVersion(p2p, block, app version.Protocol) ProtocolVersion

NewProtocolVersion returns a fully populated ProtocolVersion.

type Reactor 

type Reactor interface {
	cmn.Service // Start, Stop

	// SetSwitch allows setting a switch.
	SetSwitch(*Switch)

	// GetChannels returns the list of channel descriptors.
	GetChannels() []*conn.ChannelDescriptor

	// AddPeer is called by the switch when a new peer is added.
	AddPeer(peer Peer)

	// RemovePeer is called by the switch when the peer is stopped (due to error
	// or other reason).
	RemovePeer(peer Peer, reason interface{})

	// Receive is called when msgBytes is received from peer.
	//
	// NOTE reactor can not keep msgBytes around after Receive completes without
	// copying.
	//
	// CONTRACT: msgBytes are not nil.
	Receive(chID byte, peer Peer, msgBytes []byte)
}

type Switch 

type Switch struct {
	cmn.BaseService
	// contains filtered or unexported fields
}

Switch handles peer connections and exposes an API to receive incoming messages on `Reactors`. Each `Reactor` is responsible for handling incoming messages of one or more `Channels`. So while sending outgoing messages is typically performed on the peer, incoming messages are received on the reactor.

func MakeConnectedSwitches 

func MakeConnectedSwitches(cfg *config.P2PConfig, n int, initSwitch func(int, *Switch) *Switch, connect func([]*Switch, int, int)) []*Switch

MakeConnectedSwitches returns n switches, connected according to the connect func. If connect==Connect2Switches, the switches will be fully connected. initSwitch defines how the i'th switch should be initialized (ie. with what reactors). NOTE: panics if any switch fails to start.

func MakeSwitch added in v0.19.7 

func MakeSwitch(
	cfg *config.P2PConfig,
	i int,
	network, version string,
	initSwitch func(int, *Switch) *Switch,
	opts ...SwitchOption,
) *Switch

func NewSwitch 

func NewSwitch(
	cfg *config.P2PConfig,
	transport Transport,
	options ...SwitchOption,
) *Switch

NewSwitch creates a new Switch with the given config.

func (*Switch) AddReactor 

func (sw *Switch) AddReactor(name string, reactor Reactor) Reactor

AddReactor adds the given reactor to the switch. NOTE: Not goroutine safe.

func (*Switch) Broadcast 

func (sw *Switch) Broadcast(chID byte, msgBytes []byte) chan bool

Broadcast runs a go routine for each attempted send, which will block trying to send for defaultSendTimeoutSeconds. Returns a channel which receives success values for each attempted send (false if times out). Channel will be closed once msg bytes are sent to all peers (or time out).

NOTE: Broadcast uses goroutines, so order of broadcast may not be preserved.

func (*Switch) DialPeerWithAddress 

func (sw *Switch) DialPeerWithAddress(addr *NetAddress, persistent bool) error

DialPeerWithAddress dials the given peer and runs sw.addPeer if it connects and authenticates successfully. If `persistent == true`, the switch will always try to reconnect to this peer if the connection ever fails.

func (*Switch) DialPeersAsync added in v0.19.7 

func (sw *Switch) DialPeersAsync(addrBook AddrBook, peers []string, persistent bool) error

DialPeersAsync dials a list of peers asynchronously in random order (optionally, making them persistent). Used to dial peers from config on startup or from unsafe-RPC (trusted sources). TODO: remove addrBook arg since it's now set on the switch

func (*Switch) IsDialingOrExistingAddress added in v0.26.0 

func (sw *Switch) IsDialingOrExistingAddress(addr *NetAddress) bool

IsDialingOrExistingAddress returns true if switch has a peer with the given address or dialing it at the moment.

func (*Switch) MarkPeerAsGood added in v0.19.7 

func (sw *Switch) MarkPeerAsGood(peer Peer)

MarkPeerAsGood marks the given peer as good when it did something useful like contributed to consensus.

func (*Switch) MaxNumOutboundPeers added in v0.26.0 

func (sw *Switch) MaxNumOutboundPeers() int

MaxNumOutboundPeers returns a maximum number of outbound peers.

func (*Switch) NodeInfo 

func (sw *Switch) NodeInfo() NodeInfo

NodeInfo returns the switch's NodeInfo. NOTE: Not goroutine safe.

func (*Switch) NumPeers 

func (sw *Switch) NumPeers() (outbound, inbound, dialing int)

NumPeers returns the count of outbound/inbound and outbound-dialing peers.

func (*Switch) OnStart 

func (sw *Switch) OnStart() error

OnStart implements BaseService. It starts all the reactors and peers.

func (*Switch) OnStop 

func (sw *Switch) OnStop()

OnStop implements BaseService. It stops all peers and reactors.

func (*Switch) Peers 

func (sw *Switch) Peers() IPeerSet

Peers returns the set of peers that are connected to the switch.

func (*Switch) Reactor 

func (sw *Switch) Reactor(name string) Reactor

Reactor returns the reactor with the given name. NOTE: Not goroutine safe.

func (*Switch) Reactors 

func (sw *Switch) Reactors() map[string]Reactor

Reactors returns a map of reactors registered on the switch. NOTE: Not goroutine safe.

func (*Switch) SetAddrBook added in v0.19.7 

func (sw *Switch) SetAddrBook(addrBook AddrBook)

SetAddrBook allows to set address book on Switch.

func (*Switch) SetNodeInfo 

func (sw *Switch) SetNodeInfo(nodeInfo NodeInfo)

SetNodeInfo sets the switch's NodeInfo for checking compatibility and handshaking with other nodes. NOTE: Not goroutine safe.

func (*Switch) SetNodeKey added in v0.19.7 

func (sw *Switch) SetNodeKey(nodeKey *NodeKey)

SetNodeKey sets the switch's private key for authenticated encryption. NOTE: Not goroutine safe.

func (*Switch) StopPeerForError 

func (sw *Switch) StopPeerForError(peer Peer, reason interface{})

StopPeerForError disconnects from a peer due to external error. If the peer is persistent, it will attempt to reconnect. TODO: make record depending on reason.

func (*Switch) StopPeerGracefully 

func (sw *Switch) StopPeerGracefully(peer Peer)

StopPeerGracefully disconnects from a peer gracefully. TODO: handle graceful disconnects.

type SwitchOption added in v0.26.0 

type SwitchOption func(*Switch)

SwitchOption sets an optional parameter on the Switch.

func SwitchFilterTimeout added in v0.26.0 

func SwitchFilterTimeout(timeout time.Duration) SwitchOption

SwitchFilterTimeout sets the timeout used for peer filters.

func SwitchPeerFilters added in v0.26.0 

func SwitchPeerFilters(filters ...PeerFilterFunc) SwitchOption

SwitchPeerFilters sets the filters for rejection of new peers.

func WithMetrics added in v0.26.0 

func WithMetrics(metrics *Metrics) SwitchOption

WithMetrics sets the metrics.

type Transport added in v0.26.0 

type Transport interface {
	// Accept returns a newly connected Peer.
	Accept(peerConfig) (Peer, error)

	// Dial connects to the Peer for the address.
	Dial(NetAddress, peerConfig) (Peer, error)

	// Cleanup any resources associated with Peer.
	Cleanup(Peer)
}

Transport emits and connects to Peers. The implementation of Peer is left to the transport. Each transport is also responsible to filter establishing peers specific to its domain.

Source Files

View all Source files

Directories

Path Synopsis
Taken from taipei-torrent.
 Taken from taipei-torrent.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.