e2e

README

End-to-end tests

Document for running Velero end-to-end test suite.

The E2E tests are validating end-to-end behavior of Velero including install, backup and restore operations. These tests take longer to complete and is not expected to be part of day-to-day developer workflow. It is for this reason that they are disabled when running unit tests. This is accomplished by running unit tests in short mode using the -short flag to go test.

If you previously ran unit tests using the go test ./... command or any of its variations, then you will now run the same command with the -short flag to go test to accomplish the same behavior. Alternatively, you can use the make test command to run unit tests.

Prerequisites

Running the E2E tests expects:

1. A running kubernetes cluster:
   1. With DNS and CNI installed.
   2. Compatible with Velero- running Kubernetes v1.10 or later.
   3. With necessary storage drivers/provisioners installed.
2. kubectl installed locally.

Limitations

These are the current set of limitations with the E2E tests.

1. E2E tests only accepts credentials only for a single provider and for that reason, only tests for a single provider can be run at a time.
2. Each E2E test suite installs an instance of Velero to run tests and uninstalls it after test completion. It is possible that a test suite may be installing Velero while another may be uninstalling Velero. This race condition can lead to tests being flaky and cause false negatives. The options for resolving this are:
   1. Make each test suite setup wait for Velero to be uninstalled before attempting to install as part of its setup.
   2. Make each test suite install Velero in a different namespace.

Configuration for E2E tests

Below is a list of the configuration used by E2E tests. These configuration parameters are expected as values to the following command line flags:

1. -credentials-file: File containing credentials for backup and volume provider. Required.
2. -bucket: Name of the object storage bucket where backups from e2e tests should be stored. Required.
3. -cloud-provider: The cloud the tests will be run in. Appropriate plug-ins will be installed except for kind which requires the object-store-provider to be specified.
4. -object-store-provider: Object store provider to use. Required when kind is the cloud provider.
5. -velerocli: Path to the velero application to use. Optional, by default uses velero in the $PATH
6. -velero-image: Image for the velero server to be tested. Optional, by default uses velero/velero:main
7. -bsl-config: Configuration to use for the backup storage location. Format is key1=value1,key2=value2. Optional.
8. -prefix: Prefix in the bucket, under which all Velero data should be stored within the bucket. Optional.
9. -vsl-config: Configuration to use for the volume snapshot location. Format is key1=value1,key2=value2. Optional.
10. -velero-namespace: Namespace to install velero in. Optional, defaults to "velero".
11. -install-velero: Specifies whether to install/uninstall velero for the tests. Optional, defaults to "true".
12. -additional-bsl-object-store-provider: Provider of object store plugin for additional backup storage location. Required if testing multiple credentials support.
13. -additional-bsl-bucket: Name of the object storage bucket for additional backup storage location. Required if testing multiple credentials support.
14. -additional-bsl-prefix: Prefix in the additional-bsl-bucket, under which all Velero data should be stored. Optional.
15. -additional-bsl-config: Configuration to use for the additional backup storage location. Format is key1=value1,key2=value2. Optional.
16. -additional-bsl-credentials-file: File containing credentials for the additional backup storage location. Required if testing multiple credentials support.

These configurations or parameters are used to generate install options for Velero for each test suite.

Tests can be run with the Kubernetes cluster hosted in various cloud providers or in a kind cluster with storage in a specified object store type. Currently supported cloud provider types are aws, azure, vsphere and kind.

Running tests locally

Running using make

E2E tests can be run from the Velero repository root by running make test-e2e. While running E2E tests using make the E2E test configuration values are passed using make variables.

Below is a mapping between make variables to E2E configuration flags.

1. CREDS_FILE: -credentials-file. Required.
2. BSL_BUCKET: -bucket. Required.
3. CLOUD_PROVIDER: -cloud-provider. Required
4. OBJECT_STORE_PROVIDER: -object-store-provider. Required when kind is the cloud provider.
5. VELERO_CLI: the -velerocli. Optional.
6. VELERO_IMAGE: the -velero-image. Optional.
7. BSL_PREFIX: -prefix. Optional.
8. BSL_CONFIG: -bsl-config. Optional.
9. VSL_CONFIG: -vsl-config. Optional.
10. ADDITIONAL_OBJECT_STORE_PROVIDER: -additional-bsl-object-store-provider. Optional.
11. ADDITIONAL_CREDS_FILE: -additional-bsl-bucket. Optional.
12. ADDITIONAL_BSL_BUCKET: -additional-bsl-prefix. Optional.
13. ADDITIONAL_BSL_PREFIX: -additional-bsl-config. Optional.
14. ADDITIONAL_BSL_CONFIG: -additional-bsl-credentials-file. Optional.

For example, E2E tests can be run from Velero repository roots using the commands below:

1. Run Velero tests in a kind cluster with AWS (or Minio) as the storage provider:

   BSL_PREFIX=<PREFIX_UNDER_BUCKET> BSL_BUCKET=<BUCKET_FOR_E2E_TEST_BACKUP> CREDS_FILE=/path/to/aws-creds CLOUD_PROVIDER=kind OBJECT_STORE_PROVIDER=aws make test-e2e
   

2. Run Velero tests in an AWS cluster:

   BSL_PREFIX=<PREFIX_UNDER_BUCKET> BSL_BUCKET=<BUCKET_FOR_E2E_TEST_BACKUP> CREDS_FILE=/path/to/aws-creds CLOUD_PROVIDER=aws make test-e2e
   

3. Run Velero tests in a Microsoft Azure cluster:

   BSL_CONFIG="resourceGroup=$AZURE_BACKUP_RESOURCE_GROUP,storageAccount=$AZURE_STORAGE_ACCOUNT_ID,subscriptionId=$AZURE_BACKUP_SUBSCRIPTION_ID" BSL_BUCKET=<BUCKET_FOR_E2E_TEST_BACKUP> CREDS_FILE=/path/to/azure-creds CLOUD_PROVIDER=azure make test-e2e
   

   Please refer to velero-plugin-for-microsoft-azure documentation for instruction to set up permissions for Velero and to set up azure storage account and blob container
4. Run Ginko-focused Restore Multi-API Groups tests using Minio as the backup storage location:

   BSL_CONFIG="region=minio,s3ForcePathStyle=\"true\",s3Url=<ip address>:9000" BSL_PREFIX=<prefix> BSL_BUCKET=<bucket> CREDS_FILE=<absolute path to minio credentials file> CLOUD_PROVIDER=kind OBJECT_STORE_PROVIDER=aws VELERO_NAMESPACE="velero" GINKGO_FOCUS="API group versions" make test-e2e
   

5. Run Velero tests in a kind cluster with AWS (or Minio) as the storage provider and use Microsoft Azure as the storage provider for an additional Backup Storage Location:

   make test-e2e \
     CLOUD_PROVIDER=kind OBJECT_STORE_PROVIDER=aws BSL_BUCKET=<BUCKET_FOR_E2E_TEST_BACKUP> BSL_PREFIX=<PREFIX_UNDER_BUCKET> CREDS_FILE=/path/to/aws-creds \
     ADDITIONAL_OBJECT_STORE_PROVIDER=azure ADDITIONAL_BSL_BUCKET=<BUCKET_FOR_AZURE_BSL> ADDITIONAL_BSL_PREFIX=<PREFIX_UNDER_BUCKET> ADDITIONAL_BSL_CONFIG=<CONFIG_FOR_AZURE_BUCKET> ADDITIONAL_CREDS_FILE=/path/to/azure-creds
   

   Please refer to velero-plugin-for-microsoft-azure documentation for instruction to set up permissions for Velero and to set up azure storage account and blob container

Filtering tests

Velero E2E tests uses Ginkgo testing framework which allows a subset of the tests to be run using the -focus and -skip flags to ginkgo.

The -focus flag is passed to ginkgo using the GINKGO_FOCUS make variable. This can be used to focus on specific tests.

Adding tests

API clients

When adding a test, aim to instantiate an API client only once at the beginning of the test. There is a constructor newTestClient that facilitates the configuration and instantiation of clients. Also, please use the kubebuilder runtime controller client for any new test, as we will phase out usage of client-go API clients.

Tips

Look for the ⛵ emoji printed at the end of each install and uninstall log. There should not be two install/unintall in a row, and there should be tests between an install and an uninstall.

Documentation

Index

• Variables
• type BackupConfig
• type SnapshotCheckPoint
• type VeleroCLI2Version
• type VeleroConfig

Variables

var UUIDgen uuid.UUID

Types

type BackupConfig

type BackupConfig struct {
	BackupName              string
	Namespace               string
	BackupLocation          string
	UseVolumeSnapshots      bool
	Selector                string
	TTL                     time.Duration
	IncludeResources        string
	ExcludeResources        string
	IncludeClusterResources bool
	OrderedResources        string
	UseResticIfFSBackup     bool
}

type SnapshotCheckPoint

type SnapshotCheckPoint struct {
	NamespaceBackedUp string
	// SnapshotIDList is for Azure CSI Verification
	//  we can get SnapshotID from VolumeSnapshotContent from a certain backup
	SnapshotIDList []string
	ExpectCount    int
	PodName        []string
	EnableCSI      bool
}

type VeleroCLI2Version

type VeleroCLI2Version struct {
	VeleroVersion string
	VeleroCLI     string
}

type VeleroConfig

type VeleroConfig struct {
	VeleroCLI                string
	VeleroImage              string
	VeleroVersion            string
	CloudCredentialsFile     string
	BSLConfig                string
	BSLBucket                string
	BSLPrefix                string
	VSLConfig                string
	CloudProvider            string
	ObjectStoreProvider      string
	VeleroNamespace          string
	AdditionalBSLProvider    string
	AdditionalBSLBucket      string
	AdditionalBSLPrefix      string
	AdditionalBSLConfig      string
	AdditionalBSLCredentials string
	RegistryCredentialFile   string
	RestoreHelperImage       string
	UpgradeFromVeleroVersion string
	UpgradeFromVeleroCLI     string
	MigrateFromVeleroVersion string
	MigrateFromVeleroCLI     string
	Plugins                  string
	AddBSLPlugins            string
	InstallVelero            bool
	KibishiiDirectory        string
	Features                 string
	Debug                    bool
	GCFrequency              string
	DefaultCluster           string
	StandbyCluster           string
	ClientToInstallVelero    *TestClient
	DefaultClient            *TestClient
	StandbyClient            *TestClient
	UploaderType             string
	UseNodeAgent             bool
	UseRestic                bool
}

var VeleroCfg VeleroConfig