leveldb

package
v2.12.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 19, 2022 License: GPL-3.0, BSD-2-Clause Imports: 27 Imported by: 0

Documentation

Overview

Package leveldb provides implementation of LevelDB key/value database.

Create or open a database: 

// The returned DB instance is safe for concurrent use. Which mean that all
// DB's methods may be called concurrently from multiple goroutine.
db, err := leveldb.OpenFile("path/to/db", nil)
...
defer db.Close()
...

Read or modify the database content: 

// Remember that the contents of the returned slice should not be modified.
data, err := db.Get([]byte("key"), nil)
...
err = db.Put([]byte("key"), []byte("value"), nil)
...
err = db.Delete([]byte("key"), nil)
...

Iterate over database content: 

iter := db.NewIterator(nil, nil)
for iter.Next() {
	// Remember that the contents of the returned slice should not be modified, and
	// only valid until the next call to Next.
	key := iter.Key()
	value := iter.Value()
	...
}
iter.Release()
err = iter.Error()
...

Iterate over subset of database content with a particular prefix: 

iter := db.NewIterator(util.BytesPrefix([]byte("foo-")), nil)
for iter.Next() {
	// Use key/value.
	...
}
iter.Release()
err = iter.Error()
...

Seek-then-Iterate: 

iter := db.NewIterator(nil, nil)
for ok := iter.Seek(key); ok; ok = iter.Next() {
	// Use key/value.
	...
}
iter.Release()
err = iter.Error()
...

Iterate over subset of database content: 

iter := db.NewIterator(&util.Range{Start: []byte("foo"), Limit: []byte("xoo")}, nil)
for iter.Next() {
	// Use key/value.
	...
}
iter.Release()
err = iter.Error()
...

Batch writes: 

batch := new(leveldb.Batch)
batch.Put([]byte("foo"), []byte("value"))
batch.Put([]byte("bar"), []byte("another value"))
batch.Delete([]byte("baz"))
err = db.Write(batch, nil)
...

Use bloom filter: 

o := &opt.Options{
	Filter: filter.NewBloomFilter(10),
}
db, err := leveldb.OpenFile("path/to/db", o)
...
defer db.Close()
...

Index

Constants

View Source 
const (
	KeyTypeDel = keyType(0)
	KeyTypeVal = keyType(1)
)

Value types encoded as the last component of internal keys. Don't modify; this value are saved to disk.

View Source 
const (
	// Maximum value possible for sequence number; the 8-bits are
	// used by value type, so its can packed together in single
	// 64-bit integer.
	KeyMaxSeq = (uint64(1) << 56) - 1
)
View Source 
const KeyTypeSeek = KeyTypeVal

KeyTypeSeek defines the keyType that should be passed when constructing an internal key for seeking to a particular sequence number (since we sort sequence numbers in decreasing order and the value type is embedded as the low 8 bits in the sequence number in internal keys, we need to use the highest-numbered ValueType, not the lowest).

Variables

View Source 
var (
	ErrNotFound         = errors.ErrNotFound
	ErrReadOnly         = errors.New("leveldb: read-only mode")
	ErrSnapshotReleased = errors.New("leveldb: snapshot released")
	ErrIterReleased     = errors.New("leveldb: iterator released")
	ErrClosed           = errors.New("leveldb: closed")
)

Common errors.

Functions

func MakeInternalKey 

func MakeInternalKey(dst, ukey []byte, seq uint64, kt keyType) internalKey

func MemGet 

func MemGet(mdb *memdb.DB, ikey internalKey, icmp *IComparer) (ok bool, mv []byte, err error)

func ParseInternalKey 

func ParseInternalKey(ik []byte) (ukey []byte, seq uint64, kt keyType, err error)

Types

type Batch 

type Batch struct {
	// contains filtered or unexported fields
}

Batch is a write batch.

func (*Batch) Append 

func (b *Batch) Append(p *Batch)

func (*Batch) Delete 

func (b *Batch) Delete(key []byte)

Delete appends 'delete operation' of the given key to the batch. It is safe to modify the contents of the argument after Delete returns but not before.

func (*Batch) Dump 

func (b *Batch) Dump() []byte

Dump dumps batch contents. The returned slice can be loaded into the batch using Load method. The returned slice is not its own copy, so the contents should not be modified.

func (*Batch) Len 

func (b *Batch) Len() int

Len returns number of records in the batch.

func (*Batch) Load 

func (b *Batch) Load(data []byte) error

Load loads given slice into the batch. Previous contents of the batch will be discarded. The given slice will not be copied and will be used as batch buffer, so it is not safe to modify the contents of the slice.

func (*Batch) Put 

func (b *Batch) Put(key, value []byte)

Put appends 'put operation' of the given key/value pair to the batch. It is safe to modify the contents of the argument after Put returns but not before.

func (*Batch) Replay 

func (b *Batch) Replay(r BatchReplay) error

Replay replays batch contents.

func (*Batch) Reset 

func (b *Batch) Reset()

Reset resets the batch.

func (*Batch) Size 

func (b *Batch) Size() int

type BatchReplay 

type BatchReplay interface {
	Put(key, value []byte)
	Delete(key []byte)
}

BatchReplay wraps basic batch operations.

type DB 

type DB struct {
	// contains filtered or unexported fields
}

DB is a LevelDB database.

func Open 

func Open(stor storage.Storage, o *opt.Options) (db *DB, err error)

Open opens or creates a DB for the given storage. The DB will be created if not exist, unless ErrorIfMissing is true. Also, if ErrorIfExist is true and the DB exist Open will returns os.ErrExist error.

Open will return an error with type of ErrCorrupted if corruption detected in the DB. Use errors.IsCorrupted to test whether an error is due to corruption. Corrupted DB can be recovered with Recover function.

The returned DB instance is safe for concurrent use. The DB must be closed after use, by calling Close method.

func OpenFile 

func OpenFile(path string, o *opt.Options) (db *DB, err error)

OpenFile opens or creates a DB for the given path. The DB will be created if not exist, unless ErrorIfMissing is true. Also, if ErrorIfExist is true and the DB exist OpenFile will returns os.ErrExist error.

OpenFile uses standard file-system backed storage implementation as described in the leveldb/storage package.

OpenFile will return an error with type of ErrCorrupted if corruption detected in the DB. Use errors.IsCorrupted to test whether an error is due to corruption. Corrupted DB can be recovered with Recover function.

The returned DB instance is safe for concurrent use. The DB must be closed after use, by calling Close method.

func Recover 

func Recover(stor storage.Storage, o *opt.Options) (db *DB, err error)

Recover recovers and opens a DB with missing or corrupted manifest files for the given storage. It will ignore any manifest files, valid or not. The DB must already exist or it will returns an error. Also, Recover will ignore ErrorIfMissing and ErrorIfExist options.

The returned DB instance is safe for concurrent use. The DB must be closed after use, by calling Close method.

func RecoverFile 

func RecoverFile(path string, o *opt.Options) (db *DB, err error)

RecoverFile recovers and opens a DB with missing or corrupted manifest files for the given path. It will ignore any manifest files, valid or not. The DB must already exist or it will returns an error. Also, Recover will ignore ErrorIfMissing and ErrorIfExist options.

RecoverFile uses standard file-system backed storage implementation as described in the leveldb/storage package.

The returned DB instance is safe for concurrent use. The DB must be closed after use, by calling Close method.

func (*DB) Close 

func (db *DB) Close() error

Close closes the DB. This will also releases any outstanding snapshot, abort any in-flight compaction and discard open transaction.

It is not safe to close a DB until all outstanding iterators are released. It is valid to call Close multiple times. Other methods should not be called after the DB has been closed.

func (*DB) CompactRange 

func (db *DB) CompactRange(r util.Range) error

CompactRange compacts the underlying DB for the given key range. In particular, deleted and overwritten versions are discarded, and the data is rearranged to reduce the cost of operations needed to access the data. This operation should typically only be invoked by users who understand the underlying implementation.

A nil Range.Start is treated as a key before all keys in the DB. And a nil Range.Limit is treated as a key after all keys in the DB. Therefore if both is nil then it will compact entire DB.

func (*DB) Delete 

func (db *DB) Delete(key []byte, wo *opt.WriteOptions) error

Delete deletes the value for the given key. Delete will not returns error if key doesn't exist. Write merge also applies for Delete, see Write.

It is safe to modify the contents of the arguments after Delete returns but not before.

func (*DB) Get 

func (db *DB) Get(key []byte, ro *opt.ReadOptions) (value []byte, err error)

Get gets the value for the given key. It returns ErrNotFound if the DB does not contains the key.

The returned slice is its own copy, it is safe to modify the contents of the returned slice. It is safe to modify the contents of the argument after Get returns.

func (*DB) Get2 

func (db *DB) Get2(key []byte, ro *opt.ReadOptions, auxm *memdb.DB, seq uint64) (value []byte, err error)

func (*DB) GetProperty 

func (db *DB) GetProperty(name string) (value string, err error)

GetProperty returns value of the given property name.

Property names: 

leveldb.num-files-at-level{n}
	Returns the number of files at level 'n'.
leveldb.stats
	Returns statistics of the underlying DB.
leveldb.iostats
	Returns statistics of effective disk read and write.
leveldb.writedelay
	Returns cumulative write delay caused by compaction.
leveldb.sstables
	Returns sstables list for each level.
leveldb.blockpool
	Returns block pool stats.
leveldb.cachedblock
	Returns size of cached block.
leveldb.openedtables
	Returns number of opened tables.
leveldb.alivesnaps
	Returns number of alive snapshots.
leveldb.aliveiters
	Returns number of alive iterators.

func (*DB) GetSeq 

func (db *DB) GetSeq() uint64

Get latest sequence number.

func (*DB) GetSnapshot 

func (db *DB) GetSnapshot() (*Snapshot, error)

GetSnapshot returns a latest snapshot of the underlying DB. A snapshot is a frozen snapshot of a DB state at a particular point in time. The content of snapshot are guaranteed to be consistent.

The snapshot must be released after use, by calling Release method.

func (*DB) Has 

func (db *DB) Has(key []byte, ro *opt.ReadOptions) (ret bool, err error)

Has returns true if the DB does contains the given key.

It is safe to modify the contents of the argument after Has returns.

func (*DB) NewIterator 

func (db *DB) NewIterator(slice *util.Range, ro *opt.ReadOptions) iterator.Iterator

NewIterator returns an iterator for the latest snapshot of the underlying DB. The returned iterator is not safe for concurrent use, but it is safe to use multiple iterators concurrently, with each in a dedicated goroutine. It is also safe to use an iterator concurrently with modifying its underlying DB. The resultant key/value pairs are guaranteed to be consistent.

Slice allows slicing the iterator to only contains keys in the given range. A nil Range.Start is treated as a key before all keys in the DB. And a nil Range.Limit is treated as a key after all keys in the DB.

The iterator must be released after use, by calling Release method.

Also read Iterator documentation of the leveldb/iterator package.

func (*DB) NewIterator2 

func (db *DB) NewIterator2(slice *util.Range, ro *opt.ReadOptions, auxm *memdb.DB, seq uint64) iterator.Iterator

func (*DB) OpenTransaction 

func (db *DB) OpenTransaction() (*Transaction, error)

OpenTransaction opens an atomic DB transaction. Only one transaction can be opened at a time. Subsequent call to Write and OpenTransaction will be blocked until in-flight transaction is committed or discarded. The returned transaction handle is safe for concurrent use.

Transaction is expensive and can overwhelm compaction, especially if transaction size is small. Use with caution.

The transaction must be closed once done, either by committing or discarding the transaction. Closing the DB will discard open transaction.

func (*DB) Put 

func (db *DB) Put(key, value []byte, wo *opt.WriteOptions) error

Put sets the value for the given key. It overwrites any previous value for that key; a DB is not a multi-map. Write merge also applies for Put, see Write.

It is safe to modify the contents of the arguments after Put returns but not before.

func (*DB) SetReadOnly 

func (db *DB) SetReadOnly() error

SetReadOnly makes DB read-only. It will stay read-only until reopened.

func (*DB) SetSeq 

func (db *DB) SetSeq(seq uint64)

func (*DB) SizeOf 

func (db *DB) SizeOf(ranges []util.Range) (Sizes, error)

SizeOf calculates approximate sizes of the given key ranges. The length of the returned sizes are equal with the length of the given ranges. The returned sizes measure storage space usage, so if the user data compresses by a factor of ten, the returned sizes will be one-tenth the size of the corresponding user data size. The results may not include the sizes of recently written data.

func (*DB) Stats 

func (db *DB) Stats(s *DBStats) error

Stats populates s with database statistics.

func (*DB) Write 

func (db *DB) Write(batch *Batch, wo *opt.WriteOptions) error

Write apply the given batch to the DB. The batch records will be applied sequentially. Write might be used concurrently, when used concurrently and batch is small enough, write will try to merge the batches. Set NoWriteMerge option to true to disable write merge.

It is safe to modify the contents of the arguments after Write returns but not before. Write will not modify content of the batch.

type DBStats 

type DBStats struct {
	WriteDelayCount    int32
	WriteDelayDuration time.Duration
	WritePaused        bool

	AliveSnapshots int32
	AliveIterators int32

	IOWrite uint64
	IORead  uint64

	BlockCacheSize    int
	OpenedTablesCount int

	LevelSizes        []int64
	LevelTablesCounts []int
	LevelRead         []int64
	LevelWrite        []int64
	LevelDurations    []time.Duration
}

DBStats is database statistics.

type ErrBatchCorrupted 

type ErrBatchCorrupted struct {
	Reason string
}

ErrBatchCorrupted records reason of batch corruption. This error will be wrapped with errors.ErrCorrupted.

func (*ErrBatchCorrupted) Error 

func (e *ErrBatchCorrupted) Error() string

type ErrInternalKeyCorrupted 

type ErrInternalKeyCorrupted struct {
	Ikey   []byte
	Reason string
}

ErrInternalKeyCorrupted records internal key corruption.

func (*ErrInternalKeyCorrupted) Error 

func (e *ErrInternalKeyCorrupted) Error() string

type ErrManifestCorrupted 

type ErrManifestCorrupted struct {
	Field  string
	Reason string
}

ErrManifestCorrupted records manifest corruption. This error will be wrapped with errors.ErrCorrupted.

func (*ErrManifestCorrupted) Error 

func (e *ErrManifestCorrupted) Error() string

type IComparer 

type IComparer struct {
	// contains filtered or unexported fields
}

func NewIComparer 

func NewIComparer(ucmp comparer.Comparer) *IComparer

func (*IComparer) Compare 

func (icmp *IComparer) Compare(a, b []byte) int

func (*IComparer) Name 

func (icmp *IComparer) Name() string

func (*IComparer) Separator 

func (icmp *IComparer) Separator(dst, a, b []byte) []byte

func (*IComparer) Successor 

func (icmp *IComparer) Successor(dst, b []byte) []byte

type Reader 

type Reader interface {
	Get(key []byte, ro *opt.ReadOptions) (value []byte, err error)
	NewIterator(slice *util.Range, ro *opt.ReadOptions) iterator.Iterator
}

Reader is the interface that wraps basic Get and NewIterator methods. This interface implemented by both DB and Snapshot.

type Sizes 

type Sizes []int64

Sizes is list of size.

func (Sizes) Sum 

func (sizes Sizes) Sum() int64

Sum returns sum of the sizes.

type Snapshot 

type Snapshot struct {
	// contains filtered or unexported fields
}

Snapshot is a DB snapshot.

func (*Snapshot) Get 

func (snap *Snapshot) Get(key []byte, ro *opt.ReadOptions) (value []byte, err error)

Get gets the value for the given key. It returns ErrNotFound if the DB does not contains the key.

The caller should not modify the contents of the returned slice, but it is safe to modify the contents of the argument after Get returns.

func (*Snapshot) Has 

func (snap *Snapshot) Has(key []byte, ro *opt.ReadOptions) (ret bool, err error)

Has returns true if the DB does contains the given key.

It is safe to modify the contents of the argument after Get returns.

func (*Snapshot) NewIterator 

func (snap *Snapshot) NewIterator(slice *util.Range, ro *opt.ReadOptions) iterator.Iterator

NewIterator returns an iterator for the snapshot of the underlying DB. The returned iterator is not safe for concurrent use, but it is safe to use multiple iterators concurrently, with each in a dedicated goroutine. It is also safe to use an iterator concurrently with modifying its underlying DB. The resultant key/value pairs are guaranteed to be consistent.

Slice allows slicing the iterator to only contains keys in the given range. A nil Range.Start is treated as a key before all keys in the DB. And a nil Range.Limit is treated as a key after all keys in the DB.

The iterator must be released after use, by calling Release method. Releasing the snapshot doesn't mean releasing the iterator too, the iterator would be still valid until released.

Also read Iterator documentation of the leveldb/iterator package.

func (*Snapshot) Release 

func (snap *Snapshot) Release()

Release releases the snapshot. This will not release any returned iterators, the iterators would still be valid until released or the underlying DB is closed.

Other methods should not be called after the snapshot has been released.

func (*Snapshot) String 

func (snap *Snapshot) String() string

type Transaction 

type Transaction struct {
	// contains filtered or unexported fields
}

Transaction is the transaction handle.

func (*Transaction) Commit 

func (tr *Transaction) Commit() error

Commit commits the transaction. If error is not nil, then the transaction is not committed, it can then either be retried or discarded.

Other methods should not be called after transaction has been committed.

func (*Transaction) Delete 

func (tr *Transaction) Delete(key []byte, wo *opt.WriteOptions) error

Delete deletes the value for the given key. Please note that the transaction is not compacted until committed, so if you writes 10 same keys, then those 10 same keys are in the transaction.

It is safe to modify the contents of the arguments after Delete returns.

func (*Transaction) Discard 

func (tr *Transaction) Discard()

Discard discards the transaction.

Other methods should not be called after transaction has been discarded.

func (*Transaction) Get 

func (tr *Transaction) Get(key []byte, ro *opt.ReadOptions) ([]byte, error)

Get gets the value for the given key. It returns ErrNotFound if the DB does not contains the key.

The returned slice is its own copy, it is safe to modify the contents of the returned slice. It is safe to modify the contents of the argument after Get returns.

func (*Transaction) Has 

func (tr *Transaction) Has(key []byte, ro *opt.ReadOptions) (bool, error)

Has returns true if the DB does contains the given key.

It is safe to modify the contents of the argument after Has returns.

func (*Transaction) NewIterator 

func (tr *Transaction) NewIterator(slice *util.Range, ro *opt.ReadOptions) iterator.Iterator

NewIterator returns an iterator for the latest snapshot of the transaction. The returned iterator is not safe for concurrent use, but it is safe to use multiple iterators concurrently, with each in a dedicated goroutine. It is also safe to use an iterator concurrently while writes to the transaction. The resultant key/value pairs are guaranteed to be consistent.

Slice allows slicing the iterator to only contains keys in the given range. A nil Range.Start is treated as a key before all keys in the DB. And a nil Range.Limit is treated as a key after all keys in the DB.

The iterator must be released after use, by calling Release method.

Also read Iterator documentation of the leveldb/iterator package.

func (*Transaction) Put 

func (tr *Transaction) Put(key, value []byte, wo *opt.WriteOptions) error

Put sets the value for the given key. It overwrites any previous value for that key; a DB is not a multi-map. Please note that the transaction is not compacted until committed, so if you writes 10 same keys, then those 10 same keys are in the transaction.

It is safe to modify the contents of the arguments after Put returns.

func (*Transaction) Write 

func (tr *Transaction) Write(b *Batch, wo *opt.WriteOptions) error

Write apply the given batch to the transaction. The batch will be applied sequentially. Please note that the transaction is not compacted until committed, so if you writes 10 same keys, then those 10 same keys are in the transaction.

It is safe to modify the contents of the arguments after Write returns.

Source Files

View all Source files

Directories

Path Synopsis
Package cache provides interface and implementation of a cache algorithms.
 Package cache provides interface and implementation of a cache algorithms.
Package comparer provides interface and implementation for ordering sets of data.
 Package comparer provides interface and implementation for ordering sets of data.
Package errors provides common error types used throughout leveldb.
 Package errors provides common error types used throughout leveldb.
Package filter provides interface and implementation of probabilistic data structure.
 Package filter provides interface and implementation of probabilistic data structure.
Package iterator provides interface and implementation to traverse over contents of a database.
 Package iterator provides interface and implementation to traverse over contents of a database.
Package journal reads and writes sequences of journals.
 Package journal reads and writes sequences of journals.
Package memdb provides in-memory key/value database implementation.
 Package memdb provides in-memory key/value database implementation.
Package opt provides sets of options used by LevelDB.
 Package opt provides sets of options used by LevelDB.
Package storage provides storage abstraction for LevelDB.
 Package storage provides storage abstraction for LevelDB.
Package table allows read and write sorted key/value.
 Package table allows read and write sorted key/value.
Package util provides utilities used throughout leveldb.
 Package util provides utilities used throughout leveldb.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.