README ¶
Reflex
Reflex is a small tool to watch a directory and rerun a command when certain files change. It's great for automatically running compile/lint/test tasks and for reloading your application when the code changes.
TL;DR
# Rerun make whenever a .c file changes
reflex -r '\.c$' make
Installation
$ go get github.com/cespare/reflex
Note that this has some dependencies outside of the Go standard library. You'll need git installed, and go get
will automatically fetch them for you.
Reflex probably only works on Linux and Mac OS.
TODO: provide compiled downloads for linux/darwin amd64.
Usage
The following is given by running reflex -h
:
Usage: reflex [OPTIONS] [COMMAND]
COMMAND is any command you'd like to run. Any instance of {} will be replaced
with the filename of the changed file. (The symbol may be changed with the
--substitute flag.)
OPTIONS are given below:
-c, --config="": A configuration file that describes how to run reflex.
-d, --decoration="plain": How to decorate command stderr/stdout. Choices: none, plain, fancy.
-g, --glob="": A shell glob expression to match filenames.
--only-dirs=false: Only match directories (not files).
--only-files=false: Only match files (not directories).
-r, --regex="": A regular expression to match filenames.
-e, --sequential=false: Don't run multiple commands at the same time.
-s, --start-service=false: Indicates that the command is a long-running process to be restarted on matching changes.
--substitute="{}": The substitution symbol that is replaced with the filename in a command.
-v, --verbose=false: Verbose mode: print out more information about what reflex is doing.
Examples:
# Print each .txt file if it changes
$ reflex -r '\.txt$' echo {}
# Run 'make' if any of the .c files in this directory change:
$ reflex -g '*.c' make
# Build and run a server; rebuild and restart when .java files change:
$ reflex -r '\.java$' -s -- sh -c 'make && java bin/Server'
Overview
Reflex watches file changes in the current working directory and re-runs the command that you specify. The flags change what changes cause the command to be rerun and other behavior.
Patterns
You can specify files to match using either shell glob patterns (-g
) or regular expressions (-r
). If you
don't specify either, reflex will run your command after any file changes. You cannot specify glob patterns
and regular expressions.
The shell glob syntax is described here, while the regular
expression syntax is described here. The path that is matched
against the glob or regular expression does not have a leading ./
. For example, if there is a file
./foobar.txt
that changes, then it will be matched by the regular expression ^foobar
.
--start-service
The --start-service
flag (short version: -s
) inverts the behavior of command running: it runs the command
when reflex starts and kills/restarts it each time files change. This is expected to be used with an
indefinitely-running command, such as a server. You can use this flag to relaunch the server when the code is
changed.
Substitution
Reflex provides a way for you to determine, inside your command, what file changed. This is via a substitution
symbol. The default is {}
. Every instance of the substitution symbol inside your command is replaced by the
filename.
As a simple example, suppose you're writing Coffeescript and you wish to compile the CS files to Javascript when they change. You can do this with:
$ reflex -r '\.coffee$' -- coffee -c {}
In case you need to use {}
for something else in your command, you can change the substitution symbol with
the --substitute
flag.
Config file
What if you want to run many watches at once? For example, when writing web applications I often want to rebuild/rerun the server when my code changes, but also build SCSS and Coffeescript when those change as well. Instead of running multiple reflex instances, which is inefficient, you can simply give reflex a config file.
The config file syntax is extremely simple: each line is a command, and each command is just like calling
reflex (except without the initial reflex
command). Lines that start with #
are ignored. Here's a simple
example:
# Rebuild SCSS when it changes
-r '\.scss$' -- sh -c 'sass {} `basename {} .scss`.css'
# Restart server when ruby code changes
-sr '\.rb$' -- ./bin/run_server.sh
--sequential
When using a config file to run multiple simultaneous commands, reflex will run them at the same time (if appropriate). That is, a particular command can only be run once a previous run of that command finishes, but two different commands may run at the same time. This is usually what you want (for speed).
As a concrete example, consider this config file:
-- sh -c 'for i in `seq 1 5`; do sleep 0.1; echo first; done'
-- sh -c 'for i in `seq 1 5`; do sleep 0.1; echo second; done'
When this runs, you'll see something like this:
[01] second
[00] first
[01] second
[00] first
[00] first
[01] second
[01] second
[00] first
[01] second
[00] first
Note that the output is interleaved. (Reflex does ensure that each line of output is not interleaved with a
different line). If, for some reason, you need to ensure that your commands don't run at the same time, you
can do this with the --sequential
(-e
) flag. Then the output would look like (for example):
[01] second
[01] second
[01] second
[01] second
[01] second
[00] first
[00] first
[00] first
[00] first
[00] first
Decoration
By default, each line of output from your command is prefixed with something like [00]
, which is simply an
id that reflex assigns to each command. You can use --decoration
(-d
) to change this output:
--decoration=none
will print the output as is; --decoration=fancy
will color each line differently
depending on which command it is, making it easier to distinguish the output.
Notes and Tips
If you don't use -r
or -g
, reflex will match every file.
Many regex characters are interpreted specially by various shells. You'll generally want to minimize this effect by putting the regex in single quotes.
If your command has options, you'll probably need to use --
to separate the reflex flags from your command
flags. For example: reflex -r '.*\.txt' -- ls -l
.
If you're going to use shell things, you might need to invoke a shell as a parent process: reflex -- sh -c 'sleep 1 && echo {}'
It's not difficult to accidentally make an infinite loop with certain commands. For example, consider this
command: reflex -r '\.txt' cp {} {}.bak
. If foo.txt
changes, then this will create foo.txt.bak
,
foo.txt.bak.bak
, and so forth, because the regex \.txt
matches each file. Right now reflex doesn't have
any kind of infinite loop detection, so be careful with commands like cp
.
The restart behavior works as follows: if your program is still running, reflex sends it SIGINT; after 1 second if it's still alive, it gets SIGKILL. The new process won't be started up until the old process is dead.
Batching
Part of what reflex does is apply some heuristics to batch together file changes. There are many reasons that files change on disk, and these changes frequently come in large bursts. For instance, when you save a file in your editor, it probably makes a tempfile and then copies it over the target, leading to several different changes. Reflex hides this from you by batching some changes together.
One thing to note, though, is that the the batching is a little different depending on whether or not you have a substitution symbol in your command. If you do not, then updates for different files that all match your pattern can be batched together in a single update that only causes your command to be run once.
If you are using a substitution symbol, however, each unique matching file will be batched separately.
Argument list splitting
When you give reflex a command from the commandline (i.e., not in a config file), that command is split into
pieces by whatever shell you happen to be using. When reflex parses the config file, however, it must do that
splitting itself. For this purpose, it uses this library which
attempts to match sh
's argument splitting rules.
This difference can lead to slightly different behavior when running commands from a config file. If you're
confused, it can help to use --verbose
(-v
) which will print out each command as interpreted by reflex.
TODO
- Implement recursive globbing (globstar). (Actually fairly tricky.)
- Implement/copy the parts of go-shellquote that I need myself.
- Consider vendoring all the deps.
- Fix/remove TODOs.
The competition
- https://github.com/guard/guard
- https://github.com/alexch/rerun
- https://github.com/mynyml/watchr
- https://github.com/alloy/kicker/
Why you should use reflex instead
- Reflex has no dependencies. No need to install Ruby or anything like that.
- Reflex uses an appropriate file watching mechanism to watch for changes efficiently on your platform.
- Reflex gives your command the name of the file that changed.
- No DSL to learn -- just give it a shell command.
- No plugins.
- Not tied to any language, framework, or workflow.
Documentation ¶
There is no documentation for this package.