kgo

package
v0.7.9 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 3, 2021 License: BSD-3-Clause Imports: 33 Imported by: 392

Documentation

Overview

Package kgo provides a pure Go efficient Kafka client for Kafka 0.8.0+ with support for transactions, regex topic consuming, the latest partition strategies, and more. This client aims to support all KIPs.

This client aims to be simple to use while still interacting with Kafka in a near ideal way. If any of this client is confusing, please raise GitHub issues so we can make this clearer.

For more overview of the entire client itself, please see the package source's README.

Note that the default group consumer balancing strategy is "cooperative-sticky", which is incompatible with the historical (pre 2.4.0) balancers. If you are planning to work with an older Kafka or in an existing consumer group that uses eager balancers, be sure to use the Balancers option when assigning a group. See the documentation on balancers for more information.

Index

Constants

This section is empty.

Variables

View Source 
var (

	// ErrMaxBuffered is returned when producing with manual flushing
	// enabled and the maximum amount of records are buffered.
	ErrMaxBuffered = errors.New("manual flushing is enabled and the maximum amount of records are buffered, cannot buffer more")

	// ErrAborting is returned for all buffered records while
	// AbortBufferedRecords is being called.
	ErrAborting = errors.New("client is aborting buffered records")
)

Functions

func ParseConsumerSyncAssignment added in v0.7.0 

func ParseConsumerSyncAssignment(assignment []byte) (map[string][]int32, error)

ParseConsumerSyncAssignment returns an assignment as specified a kmsg.GroupMemberAssignment, that is, the type encoded in metadata for the consumer protocol.

Types

type Acks 

type Acks struct {
	// contains filtered or unexported fields
}

Acks represents the number of acks a broker leader must have before a produce request is considered complete.

This controls the durability of written records and corresponds to "acks" in Kafka's Producer Configuration documentation.

The default is LeaderAck.

func AllISRAcks 

func AllISRAcks() Acks

AllISRAcks ensures that all in-sync replicas have acknowledged they wrote a record before the leader replies success.

func LeaderAck 

func LeaderAck() Acks

LeaderAck causes Kafka to reply that a record is written after only the leader has written a message. The leader does not wait for in-sync replica replies.

func NoAck 

func NoAck() Acks

NoAck considers records sent as soon as they are written on the wire. The leader does not reply to records.

type BalancePlan added in v0.7.0 

type BalancePlan struct {
	// contains filtered or unexported fields
}

BalancePlan is a helper type to build the result of balancing topics and partitions among group members.

func (*BalancePlan) AddPartition added in v0.7.0 

func (p *BalancePlan) AddPartition(member *kmsg.JoinGroupResponseMember, topic string, partition int32)

AddPartition assigns a partition for the topic to a given member.

func (*BalancePlan) AddPartitions added in v0.7.0 

func (p *BalancePlan) AddPartitions(member *kmsg.JoinGroupResponseMember, topic string, partitions []int32)

AddPartitions assigns many partitions for a topic to a given member.

func (*BalancePlan) AdjustCooperative added in v0.7.0 

func (p *BalancePlan) AdjustCooperative(b *ConsumerBalancer)

AdjustCooperative performs the final adjustment to a plan for cooperative balancing.

Over the plan, we remove all partitions that migrated from one member (where it was assigned) to a new member (where it is now planned).

This allows members that had partitions removed to revoke and rejoin, which will then do another rebalance, and in that new rebalance, the planned partitions are now on the free list to be assigned.

func (*BalancePlan) IntoSyncAssignment added in v0.7.0 

func (p *BalancePlan) IntoSyncAssignment() []kmsg.SyncGroupRequestGroupAssignment

IntoSyncAssignment satisfies the IntoSyncAssignment interface.

func (*BalancePlan) String added in v0.7.0 

func (p *BalancePlan) String() string

type Broker 

type Broker struct {
	// contains filtered or unexported fields
}

Broker pairs a broker ID with a client to directly issue requests to a specific broker.

func (*Broker) Request 

func (b *Broker) Request(ctx context.Context, req kmsg.Request) (kmsg.Response, error)

Request issues a request to a broker. If the broker does not exist in the client, this returns an unknown broker error. Requests are not retried.

The passed context can be used to cancel a request and return early. Note that if the request is not canceled before it is written to Kafka, you may just end up canceling and not receiving the response to what Kafka inevitably does.

It is more beneficial to always use RetriableRequest.

func (*Broker) RetriableRequest added in v0.6.2 

func (b *Broker) RetriableRequest(ctx context.Context, req kmsg.Request) (kmsg.Response, error)

RetriableRequest issues a request to a broker the same as Broker, but retries in the face of retriable broker connection errors. This does not retry on response internal errors.

type BrokerMetadata 

type BrokerMetadata struct {
	// NodeID is the broker node ID.
	//
	// Seed brokers will have very negative IDs; kgo does not try to map
	// seed brokers to loaded brokers.
	NodeID int32

	// Port is the port of the broker.
	Port int32

	// Host is the hostname of the broker.
	Host string

	// Rack is an optional rack of the broker. It is invalid to modify this
	// field.
	//
	// Seed brokers will not have a rack.
	Rack *string
	// contains filtered or unexported fields
}

BrokerMetadata is metadata for a broker.

This struct mirrors kmsg.MetadataResponseBroker.

type Client 

type Client struct {
	// contains filtered or unexported fields
}

Client issues requests and handles responses to a Kafka cluster.

func NewClient 

func NewClient(opts ...Opt) (*Client, error)

NewClient returns a new Kafka client with the given options or an error if the options are invalid. Connections to brokers are lazily created only when requests are written to them.

By default, the client uses the latest stable request versions when talking to Kafka. If you use a broker older than 0.10.0, then you need to manually set a MaxVersions option. Otherwise, there is usually no harm in defaulting to the latest API versions, although occasionally Kafka introduces new required parameters that do not have zero value defaults.

NewClient also launches a goroutine which periodically updates the cached topic metadata.

func (*Client) AbortBufferedRecords 

func (cl *Client) AbortBufferedRecords(ctx context.Context) error

AbortBufferedRecords fails all unflushed records with ErrAborted and waits for there to be no buffered records.

This accepts a context to quit the wait early, but it is strongly recommended to always wait for all records to be flushed. Waits should not occur. The only case where this function returns an error is if the context is canceled while flushing.

The intent of this function is to provide a way to clear the client's production backlog. For example, before aborting a transaction and beginning a new one, it would be erroneous to not wait for the backlog to clear before beginning a new transaction. Anything not cleared may be a part of the new transaction.

Records produced during or after a call to this function may not be failed, thus it is incorrect to concurrently produce with this function.

This function is safe to call multiple times concurrently, and safe to call concurrent with Flush.

func (*Client) AssignGroup 

func (cl *Client) AssignGroup(group string, opts ...GroupOpt)

AssignGroup assigns a group to consume from, overriding any prior assignment.

To leave a group, you can AssignGroup with an empty group, or just close the client. If you are using instance IDs, the client does not explicitly leave the group and instead you must issue a `kmsg.LeaveGroupRequest` manually (as expected when using instance IDs).

It is recommended to do one final blocking commit before leaving a group.

func (*Client) AssignGroupTransactSession 

func (cl *Client) AssignGroupTransactSession(group string, opts ...GroupOpt) *GroupTransactSession

AssignGroupTransactSession is exactly the same as AssignGroup, but wraps the group consumer's OnRevoke with a function that will ensure a transaction session is correctly aborted.

When ETLing in a group in a transaction, if a rebalance happens before the transaction is ended, you either (a) must block the rebalance from finishing until you are done producing, and then commit before unblocking, or (b) allow the rebalance to happen, but abort any work you did.

The problem with (a) is that if your ETL work loop is slow, you run the risk of exceeding the rebalance timeout and being kicked from the group. You will try to commit, and depending on the Kafka version, the commit may even be erroneously successful (pre Kafka 2.5.0). This will lead to duplicates.

Instead, for safety, a GroupTransactSession favors (b). If a rebalance occurs at any time before ending a transaction with a commit, this will abort the transaction.

This leaves the risk that ending the transaction itself exceeds the rebalance timeout, but this is just one request with no cpu logic. With a proper rebalance timeout, this single request will not fail and the commit will succeed properly.

func (*Client) AssignPartitions 

func (cl *Client) AssignPartitions(opts ...DirectConsumeOpt)

AssignPartitions assigns an exact set of partitions for the client to consume from. Any prior direct assignment or group assignment is invalidated.

This takes ownership of any assignments.

func (*Client) BeginTransaction 

func (cl *Client) BeginTransaction() error

BeginTransaction sets the client to a transactional state, erroring if there is no transactional ID, or if the producer is currently in a fatal (unrecoverable) state, or if the client is already in a transaction.

This must not be called concurrently with other client functions.

func (*Client) BlockingCommitOffsets 

func (cl *Client) BlockingCommitOffsets(
	ctx context.Context,
	uncommitted map[string]map[int32]EpochOffset,
	onDone func(*kmsg.OffsetCommitRequest, *kmsg.OffsetCommitResponse, error),
)

BlockingCommitOffsets cancels any active CommitOffsets, begins a commit that cannot be canceled, and waits for that commit to complete. This function will not return until the commit is done and the onDone callback is complete.

The purpose of this function is for use in OnRevoke or committing before leaving a group.

For OnRevoke, you do not want to have a commit in OnRevoke canceled, because once the commit is done, rebalancing will continue. If you cancel an OnRevoke commit and commit after the revoke, you will be committing for a stale session, the commit will be dropped, and you will likely doubly process records.

For more information about committing, see the documentation for CommitOffsets.

func (*Client) Broker 

func (cl *Client) Broker(id int) *Broker

Broker returns a handle to a specific broker to directly issue requests to. Note that there is no guarantee that this broker exists; if it does not, requests will fail with with an unknown broker error.

func (*Client) Close 

func (cl *Client) Close()

Close leaves any group and closes all connections and goroutines.

If you are group consuming and have overridden the default OnRevoked, you must manually commit offsets before closing the client.

func (*Client) CommitOffsets 

func (cl *Client) CommitOffsets(
	ctx context.Context,
	uncommitted map[string]map[int32]EpochOffset,
	onDone func(*kmsg.OffsetCommitRequest, *kmsg.OffsetCommitResponse, error),
)

CommitOffsets commits the given offsets for a group, calling onDone with the commit request and either the response or an error if the response was not issued. If uncommitted is empty or the client is not consuming as a group, onDone is called with (nil, nil, nil) and this function returns immediately. It is OK if onDone is nil, but you will not know if your commit succeeded.

If autocommitting is enabled, this function blocks autocommitting until this function is complete and the onDone has returned.

This function itself does not wait for the commit to finish. By default, this function is an asynchronous commit. You can use onDone to make it sync.

Note that this function ensures absolute ordering of commit requests by canceling prior requests and ensuring they are done before executing a new one. This means, for absolute control, you can use this function to periodically commit async and then issue a final sync commit before quitting (this is the behavior of autocommiting and using the default revoke). This differs from the Java async commit, which does not retry requests to avoid trampling on future commits.

If using autocommitting, autocommitting will resume once this is complete.

It is invalid to use this function to commit offsets for a transaction.

It is highly recommended to check the response's partition's error codes if the response is non-nil. While unlikely, individual partitions can error. This is most likely to happen if a commit occurs too late in a rebalance event.

If manually committing, you want to set OnRevoked to commit synchronously using BlockingCommitOffsets. Otherwise if committing async OnRevoked may return and a new group session may start before the commit is issued, leading to the commit being ignored and leading to duplicate messages.

func (*Client) CommittedOffsets 

func (cl *Client) CommittedOffsets() map[string]map[int32]EpochOffset

CommittedOffsets returns the latest committed offsets. Committed offsets are updated from commits or from joining a group and fetching offsets.

If there are no committed offsets, this returns nil.

func (*Client) DiscoveredBrokers 

func (cl *Client) DiscoveredBrokers() []*Broker

DiscoveredBrokers returns all brokers that were discovered from prior metadata responses. This does not actually issue a metadata request to load brokers; if you wish to ensure this returns all brokers, be sure to manually issue a metadata request before this. This also does not include seed brokers, which are internally saved under special internal broker IDs (but, it does include those brokers under their normal IDs as returned from a metadata response).

func (*Client) EndTransaction 

func (cl *Client) EndTransaction(ctx context.Context, commit TransactionEndTry) error

EndTransaction ends a transaction and resets the client's internal state to not be in a transaction.

Flush and CommitOffsetsForTransaction must be called before this function; this function does not flush and does not itself ensure that all buffered records are flushed. If no record yet has caused a partition to be added to the transaction, this function does nothing and returns nil. Alternatively, AbortBufferedRecords should be called before aborting a transaction to ensure that any buffered records not yet flushed will not be a part of a new transaction.

If the producer ID has an error and you are trying to commit, this will return with kerr.OperationNotAttempted. If this happend, retry EndTransaction with TryAbort. Not other error is retriable, and you should not retry with TryAbort.

If records failed with UnknownProducerID and your Kafka version is at least 2.5.0, then aborting here will potentially allow the client to recover for more production.

Note that canceling the context will likely leave the client in an undesirable state, because canceling the context may cancel the in-flight EndTransaction request, making it impossible to know whether the commit or abort was successful. It is recommended to not cancel the context.

func (*Client) Flush 

func (cl *Client) Flush(ctx context.Context) error

Flush hangs waiting for all buffered records to be flushed, stopping all lingers if necessary.

If the context finishes (Done), this returns the context's error.

This function is safe to call multiple times concurrently, and safe to call concurrent with Flush.

func (*Client) ForceRebalance added in v0.7.0 

func (cl *Client) ForceRebalance()

ForceRebalance quits a group member's heartbeat loop so that the member rejoins with a JoinGroupRequest.

This function is only useful if you either (a) know that the group member is a leader, and want to force a rebalance for any particular reason, or (b) are using a custom group balancer, and have changed the metadata that will be returned from its JoinGroupMetadata method. This function has no other use; see KIP-568 for more details around this function's motivation.

If neither of the cases above are true (this member is not a leader, and the join group metadata has not changed), then Kafka will not actually trigger a rebalance and will instead reply to the member with its current assignment.

func (*Client) LeaveGroup added in v0.6.4 

func (cl *Client) LeaveGroup()

LeaveGroup leaves a group if in one. Calling the client's Close function also leaves a group, so this is only necessary to call if you plan to leave the group and continue using the client.

If you have overridden the default revoke, you must manually commit offsets before leaving the group.

If you have configured the group with an InstanceID, this does not leave the group. With instance IDs, it is expected that clients will restart and re-use the same instance ID. To leave a group using an instance ID, you must manually issue a kmsg.LeaveGroupRequest or use an external tool (kafka scripts or kcl).

func (*Client) PollFetches 

func (cl *Client) PollFetches(ctx context.Context) Fetches

PollFetches waits for fetches to be available, returning as soon as any broker returns a fetch. If the ctx quits, this function quits.

It is important to check all partition errors in the returned fetches. If any partition has a fatal error and actually had no records, fake fetch will be injected with the error.

func (*Client) PollRecords added in v0.6.10 

func (cl *Client) PollRecords(ctx context.Context, maxPollRecords int) Fetches

PollRecords waits for records to be available, returning as soon as any broker returns a record in a fetch. If the ctx quits, this function quits. This returns a maximum of maxPollRecords total across all fetches, or returns all buffered records if maxPollRecords is <= 0.

It is important to check all partition errors in the returned fetches. If any partition has a fatal error and actually had no records, fake fetch will be injected with the error.

func (*Client) Produce 

func (cl *Client) Produce(
	ctx context.Context,
	r *Record,
	promise func(*Record, error),
)

Produce sends a Kafka record to the topic in the record's Topic field, calling promise with the record or an error when Kafka replies. For a synchronous produce, see ProduceSync.

The promise is optional, but not using it means you will not know if Kafka recorded a record properly. Records are produced in per-partition order and promises are called in per-partition order if the record is buffered to a topic that has loaded successfully. Topics that fail loading, or records that cannot be buffered, may not have their promises called in order. Promises may be called concurrently.

If a record is produced successfully, the record's attrs / offset / etc. fields are updated appropriately before a promise is called.

If the record has an empty Topic field, the client will use a default topic if the client was configured with one via ProduceTopic, otherwise the record will be failed immediately.

If the record is too large to fit in a batch on its own in a produce request, the promise will be called with kerr.MessageTooLarge and there will be no attempt to produce the record.

The context is used if the client currently has the max amount of buffered records. If so, the client waits for some records to complete or for the context or client to quit. If the context / client quits, the promise is called with ctx.Err().

The context is also used on a per-partition basis to abort buffered records. If the context is done for the first record buffered in a partition, and if it is valid to abort records (i.e., we can avoid invalid sequence numbers), then all buffered records for a partition are aborted. The context checked for doneness is always the first buffered record's context. The context is evaluated before or after writing a request.

The first buffered record for an unknown topic begins a timeout for the configured record timeout limit; all records buffered within the wait will expire with the same timeout if the topic does not load in time. For simplicity, any time spent waiting for the topic to load is not persisted through once the topic loads, meaning the record may further wait once buffered. This may be changed in the future if necessary, however, the only reason for a topic to not load promptly is if it does not exist.

If manual flushing is configured and there are already MaxBufferedRecords buffered, the promise is immediately called with ErrMaxBuffered.

If the client is transactional and a transaction has not been begun, the promise is immediately called with an error corresponding to not being in a transaction.

func (*Client) ProduceSync added in v0.7.0 

func (cl *Client) ProduceSync(ctx context.Context, rs ...*Record) ProduceResults

ProduceSync is a synchronous produce. Please see the Produce documentation for an in depth description of how producing works.

This function produces all records in one range loop and waits for them all to be produced before returning.

func (*Client) Request 

func (cl *Client) Request(ctx context.Context, req kmsg.Request) (kmsg.Response, error)

Request issues a request to Kafka, waiting for and returning the response. If a retriable network error occurs, or if a retriable group / transaction coordinator error occurs, the request is retried. All other errors are returned.

If the request is an admin request, this will issue it to the Kafka controller. If the controller ID is unknown, this will attempt to fetch it. If the fetch errors, this will return an unknown controller error.

If the request is a group or transaction coordinator request, this will issue the request to the appropriate group or transaction coordinator.

For transaction requests, the request is issued to the transaction coordinator. However, if the request is an init producer ID request and the request has no transactional ID, the request goes to any broker.

Some requests need to be split and sent to many brokers. For these requests, it is *highly* recommended to use RequestSharded. Not all responses from many brokers can be cleanly merged. However, for the requests that are split, this does attempt to merge them in a sane way.

The following requests are split: 

ListOffsets
DescribeGroups
ListGroups
DeleteRecords
OffsetForLeaderEpoch
DescribeConfigs
AlterConfigs
AlterReplicaLogDirs
DescribeLogDirs
DeleteGroups
IncrementalAlterConfigs
DescribeProducers
DescribeTransactions
ListTransactions

In short, this method tries to do the correct thing depending on what type of request is being issued.

The passed context can be used to cancel a request and return early. Note that if the request was written to Kafka but the context canceled before a response is received, Kafka may still operate on the received request.

If using this function to issue kmsg.ProduceRequest's, you must configure the client with the same RequiredAcks option that you use in the request. If you are issuing produce requests with 0 acks, you must configure the client with the same timeout you use in the request. The client will internally rewrite the incoming request's acks to match the client's configuration, and it will rewrite the timeout millis if the acks is 0. It is strongly recommended to not issue raw kmsg.ProduceRequest's.

func (*Client) RequestSharded added in v0.6.2 

func (cl *Client) RequestSharded(ctx context.Context, req kmsg.Request) []ResponseShard

RequestSharded performs the same logic as Request, but returns all responses from any broker that the request was split to. This always returns at least one shard. If the request does not need to be issued (describing no groups), this issues the request to a random broker just to ensure that one shard exists.

There are only a few requests that are strongly recommended to explicitly use RequestSharded; the rest can by default use Request. These few requests are mentioned in the documentation for Request.

If, in the process of splitting a request, some topics or partitions are found to not exist, or Kafka replies that a request should go to a broker that does not exist, all those non-existent pieces are grouped into one request to the first seed broker. This will show up as a seed broker node ID (min int32) and the response will likely contain purely errors.

The response shards are ordered by broker metadata.

func (*Client) SeedBrokers 

func (cl *Client) SeedBrokers() []*Broker

SeedBrokers returns the all seed brokers.

func (*Client) SetOffsets 

func (cl *Client) SetOffsets(setOffsets map[string]map[int32]EpochOffset)

SetOffsets, for consumer groups, sets any matching offsets in setOffsets to the given epoch/offset. Partitions that are not specified are not set. It is invalid to set topics that were not yet returned from a PollFetches.

If using transactions, it is advised to just use a GroupTransactSession and avoid this function entirely.

It is strongly recommended to use this function outside of the context of a PollFetches loop and only when you know the group is not revoked (i.e., block any concurrent revoke while issuing this call). Any other usage is prone to odd interactions.

func (*Client) UncommittedOffsets 

func (cl *Client) UncommittedOffsets() map[string]map[int32]EpochOffset

UncommittedOffsets returns the latest uncommitted offsets. Uncommitted offsets are always updated on calls to PollFetches.

If there are no uncommitted offsets, this returns nil.

Note that, if manually committing, you should be careful with committing during group rebalances. You must ensure you commit before the group's session timeout is reached, otherwise this client will be kicked from the group and the commit will fail.

If using a cooperative balancer, commits while consuming during rebalancing may fail with REBALANCE_IN_PROGRESS.

type CompressionCodec 

type CompressionCodec struct {
	// contains filtered or unexported fields
}

CompressionCodec configures how records are compressed before being sent.

Records are compressed within individual topics and partitions, inside of a RecordBatch. All records in a RecordBatch are compressed into one record for that batch.

func GzipCompression 

func GzipCompression() CompressionCodec

GzipCompression enables gzip compression with the default compression level.

func Lz4Compression 

func Lz4Compression() CompressionCodec

Lz4Compression enables lz4 compression with the fastest compression level.

func NoCompression 

func NoCompression() CompressionCodec

NoCompression is the default compression used for messages and can be used as a fallback compression option.

func SnappyCompression 

func SnappyCompression() CompressionCodec

SnappyCompression enables snappy compression.

func ZstdCompression 

func ZstdCompression() CompressionCodec

ZstdCompression enables zstd compression with the default compression level.

func (CompressionCodec) WithLevel 

func (c CompressionCodec) WithLevel(level int) CompressionCodec

WithLevel changes the compression codec's "level", effectively allowing for higher or lower compression ratios at the expense of CPU speed.

For the zstd package, the level is a typed int; simply convert the type back to an int for this function.

If the level is invalid, compressors just use a default level.

type ConsumerBalancer added in v0.7.0 

type ConsumerBalancer struct {
	// contains filtered or unexported fields
}

ConsumerBalancer is a helper type for writing balance plans that use the "consumer" protocol, such that each member uses a kmsg.GroupMemberMetadata in its join group request.

func NewConsumerBalancer added in v0.7.0 

func NewConsumerBalancer(balance ConsumerBalancerBalance, members []kmsg.JoinGroupResponseMember) (*ConsumerBalancer, error)

NewConsumerBalancer parses the each member's metadata as a kmsg.GroupMemberMetadata and returns a ConsumerBalancer to use in balancing.

If any metadata parsing fails, this returns an error.

func (*ConsumerBalancer) Balance added in v0.7.0 

func (b *ConsumerBalancer) Balance(topics map[string]int32) IntoSyncAssignment

Balance satisfies the GroupMemberBalancer interface.

func (*ConsumerBalancer) EachMember added in v0.7.0 

func (b *ConsumerBalancer) EachMember(fn func(member *kmsg.JoinGroupResponseMember, meta *kmsg.GroupMemberMetadata))

EachMember calls fn for each member and its corresponding metadata in the consumer group being balanced.

func (*ConsumerBalancer) MemberAt added in v0.7.0 

func (b *ConsumerBalancer) MemberAt(n int) (*kmsg.JoinGroupResponseMember, *kmsg.GroupMemberMetadata)

MemberAt returns the nth member and its corresponding metadata.

func (*ConsumerBalancer) MemberTopics added in v0.7.0 

func (b *ConsumerBalancer) MemberTopics() map[string]struct{}

MemberTopics returns the unique set of topics that all members are interested in.

This can safely be called if the balancer is nil; if so, this will return nil.

func (*ConsumerBalancer) Members added in v0.7.0 

func (b *ConsumerBalancer) Members() []kmsg.JoinGroupResponseMember

Member returns the list of input members for this group balancer.

func (*ConsumerBalancer) NewPlan added in v0.7.0 

func (b *ConsumerBalancer) NewPlan() *BalancePlan

NewPlan returns a type that can be used to build a balance plan. The return satisfies the IntoSyncAssignment interface.

type ConsumerBalancerBalance added in v0.7.0 

type ConsumerBalancerBalance interface {
	Balance(*ConsumerBalancer, map[string]int32) IntoSyncAssignment
}

ConsumerBalancerBalance is what the ConsumerBalancer invokes to balance a group.

type ConsumerOpt 

type ConsumerOpt interface {
	Opt
	// contains filtered or unexported methods
}

ConsumerOpt is a consumer-specific option to configure a client. This is simply a namespaced Opt.

func AllowedConcurrentFetches added in v0.6.4 

func AllowedConcurrentFetches(n int) ConsumerOpt

AllowedConcurrentFetches sets the maximum number of fetch requests to allow in flight or buffered at once, overriding the unbounded (i.e. number of brokers) default.

This setting, paired with FetchMaxBytes, can upper bound the maximum amount of memory that the client can use for consuming.

Requests are issued to brokers in a FIFO order: once the client is ready to issue a request to a broker, it registers that request and issues it in order with other registrations.

If Kafka replies with any data, the client does not track the fetch as completed until the user has polled the buffered fetch. Thus, a concurrent fetch is not considered complete until all data from it is done being processed and out of the client itself.

Note that brokers are allowed to hang for up to FetchMaxWait before replying to a request, so if this option is too constrained and you are consuming a low throughput topic, the client may take a long time before requesting a broker that has new data. For high throughput topics, or if the allowed concurrent fetches is large enough, this should not be a concern.

A value of 0 implies the allowed concurrency is unbounded and will be limited only by the number of brokers in the cluster.

func ConsumeResetOffset 

func ConsumeResetOffset(offset Offset) ConsumerOpt

ConsumeResetOffset sets the offset to restart consuming from when a partition has no commits (for groups) or when a fetch sees an OffsetOutOfRange error, overriding the default ConsumeStartOffset.

func FetchIsolationLevel 

func FetchIsolationLevel(level IsolationLevel) ConsumerOpt

FetchIsolationLevel sets the "isolation level" used for fetching records, overriding the default ReadUncommitted.

func FetchMaxBytes 

func FetchMaxBytes(b int32) ConsumerOpt

FetchMaxBytes sets the maximum amount of bytes a broker will try to send during a fetch, overriding the default 50MiB. Note that brokers may not obey this limit if it has records larger than this limit. Also note that this client sends a fetch to each broker concurrently, meaning the client will buffer up to <brokers * max bytes> worth of memory.

This corresponds to the Java fetch.max.bytes setting.

If bumping this, consider bumping BrokerMaxReadBytes.

func FetchMaxPartitionBytes 

func FetchMaxPartitionBytes(b int32) ConsumerOpt

FetchMaxPartitionBytes sets the maximum amount of bytes that will be consumed for a single partition in a fetch request, overriding the default 10MiB. Note that if a single batch is larger than this number, that batch will still be returned so the client can make progress.

This corresponds to the Java max.partition.fetch.bytes setting.

func FetchMaxWait 

func FetchMaxWait(wait time.Duration) ConsumerOpt

FetchMaxWait sets the maximum amount of time a broker will wait for a fetch response to hit the minimum number of required bytes before returning, overriding the default 5s.

This corresponds to the Java replica.fetch.wait.max.ms setting.

func FetchMinBytes added in v0.6.2 

func FetchMinBytes(b int32) ConsumerOpt

FetchMinBYtes sets the minimum amount of bytes a broker will try to send during a fetch, overriding the default 1 byte.

With the default of 1, data is sent as soon as it is available. By bumping this, the broker will try to wait for more data, which may improve server throughput at the expense of added latency.

This corresponds to the Java fetch.min.bytes setting.

func KeepControlRecords 

func KeepControlRecords() ConsumerOpt

KeepControlRecords sets the client to keep control messages and return them with fetches, overriding the default that discards them.

Generally, control messages are not useful.

func Rack 

func Rack(rack string) ConsumerOpt

Rack specifies where the client is physically located and changes fetch requests to consume from the closest replica as opposed to the leader replica.

Consuming from a preferred replica can increase latency but can decrease cross datacenter costs. See KIP-392 for more information.

type DirectConsumeOpt 

type DirectConsumeOpt interface {
	// contains filtered or unexported methods
}

DirectConsumeOpt is an option to configure direct topic / partition consuming.

func ConsumePartitions 

func ConsumePartitions(partitions map[string]map[int32]Offset) DirectConsumeOpt

ConsumePartitions sets partitions to consume from directly and the offsets to start consuming those partitions from.

Offsets from option have higher precedence than ConsumeTopics. If a topic's partition is set in this option and that topic is also set in ConsumeTopics, offsets on partitions in this option are used in favor of the more general topic offset from ConsumeTopics.

func ConsumeTopics 

func ConsumeTopics(offset Offset, topics ...string) DirectConsumeOpt

ConsumeTopics sets topics to consume directly and the offsets to start consuming partitions from in those topics.

If a metadata update sees partitions added to a topic, the client will automatically begin consuming from those new partitions.

func ConsumeTopicsRegex 

func ConsumeTopicsRegex() DirectConsumeOpt

ConsumeTopicsRegex sets all topics in ConsumeTopics to be parsed as regular expressions.

type E2EInfo added in v0.7.7 

type E2EInfo struct {
	// BytesWritten is the number of bytes written for this request.
	//
	// This may not be the whole request if there was an error while writing.
	BytesWritten int

	// BytesRead is the number of bytes read for this requests's response.
	//
	// This may not be the whole response if there was an error while
	// reading, and this will be zero if there was a write error.
	BytesRead int

	// WriteWait is the time spent waiting from when this request was
	// generated internally in the client to just before the request is
	// written to the connection. This number is not included in the
	// DurationE2E method.
	WriteWait time.Duration
	// TimeToWrite is how long a request took to be written on the wire.
	// This specifically tracks only how long conn.Write takes.
	TimeToWrite time.Duration
	// ReadWait tracks the span of time immediately following conn.Write
	// until conn.Read begins.
	ReadWait time.Duration
	// TimeToRead tracks how long conn.Read takes for this request to be
	// entirely read. This includes the time it takes to allocate a buffer
	// for the response after the initial four size bytes are read.
	TimeToRead time.Duration

	// WriteErr is any error encountered during writing. If a write error is
	// encountered, no read will be attempted.
	WriteErr error
	// ReadErr is any error encountered during reading.
	ReadErr error
}

E2EInfo tracks complete information for a write of a request followed by a read of that requests's response.

Note that if this is for a produce request with no acks, there will be no read wait / time to read.

func (*E2EInfo) DurationE2E added in v0.7.7 

func (e *E2EInfo) DurationE2E() time.Duration

DurationE2E returns the e2e time from the start of when a request is written to the end of when the response for that request was fully read. If a write or read error occurs, this hook is called with all information possible at the time (e.g., if a write error occurs, all write info is specified).

Kerberos SASL does not cause this hook, since it directly reads from the connection.

func (*E2EInfo) Err added in v0.7.7 

func (e *E2EInfo) Err() error

Err returns the first of either the write err or the read err. If this return is non-nil, the request/response had an error.

type EpochOffset 

type EpochOffset struct {
	Epoch  int32
	Offset int64
}

EpochOffset combines a record offset with the leader epoch the broker was at when the record was written.

type ErrDataLoss 

type ErrDataLoss struct {
	// Topic is the topic data loss was detected on.
	Topic string
	// Partition is the partition data loss was detected on.
	Partition int32
	// ConsumedTo is what the client had consumed to for this partition before
	// data loss was detected.
	ConsumedTo int64
	// ResetTo is what the client reset the partition to; everything from
	// ResetTo to ConsumedTo was lost.
	ResetTo int64
}

ErrDataLoss is returned for Kafka >=2.1.0 when data loss is detected and the client is able to reset to the last valid offset.

func (*ErrDataLoss) Error 

func (e *ErrDataLoss) Error() string

type Fetch 

type Fetch struct {
	// Topics are all topics being responded to from a fetch to a broker.
	Topics []FetchTopic
}

Fetch is an individual response from a broker.

type FetchError 

type FetchError struct {
	Topic     string
	Partition int32
	Err       error
}

FetchError is an error in a fetch along with the topic and partition that the error was on.

type FetchPartition 

type FetchPartition struct {
	// Partition is the partition this is for.
	Partition int32
	// Err is an error for this partition in the fetch.
	//
	// Note that if this is a fatal error, such as data loss or non
	// retriable errors, this partition will never be fetched again.
	Err error
	// HighWatermark is the current high watermark for this partition, that
	// is, the current offset that is on all in sync replicas.
	HighWatermark int64
	// LastStableOffset is the offset at which all prior offsets have been
	// "decided". Non transactional records are always decided immediately,
	// but transactional records are only decided once they are commited or
	// aborted.
	//
	// The LastStableOffset will always be at or under the HighWatermark.
	LastStableOffset int64
	// LogStartOffset is the low watermark of this partition, otherwise
	// known as the earliest offset in the partition.
	LogStartOffset int64
	// Records contains feched records for this partition.
	Records []*Record
}

FetchPartition is a response for a partition in a fetched topic from a broker.

type FetchTopic 

type FetchTopic struct {
	// Topic is the topic this is for.
	Topic string
	// Partitions contains individual partitions in the topic that were
	// fetched.
	Partitions []FetchPartition
}

FetchTopic is a response for a fetched topic from a broker.

type FetchTopicPartition added in v0.6.10 

type FetchTopicPartition struct {
	// Topic is the topic this is for.
	Topic string
	// Partition is an individual partition within this topic.
	Partition FetchPartition
}

FetchTopicPartition is similar to FetchTopic, but for an individual partition.

func (*FetchTopicPartition) EachRecord added in v0.6.10 

func (r *FetchTopicPartition) EachRecord(fn func(*Record))

EachRecord calls fn for each record in the topic's partition.

type Fetches 

type Fetches []Fetch

Fetches is a group of fetches from brokers.

func (Fetches) EachPartition added in v0.6.10 

func (fs Fetches) EachPartition(fn func(FetchTopicPartition))

EachPartition calls fn for each partition in Fetches.

Partitions are not visited in any specific order, and a topic may be visited multiple times if it is spread across fetches.

func (Fetches) EachRecord added in v0.7.0 

func (fs Fetches) EachRecord(fn func(*Record))

EachRecord calls fn for each record in Fetches.

This is very similar to using a record iter, and is solely a convenience function depending on which style you prefer.

func (Fetches) EachTopic added in v0.7.0 

func (fs Fetches) EachTopic(fn func(FetchTopic))

EachTopic calls fn for each topic in Fetches.

This is a convenience function that groups all partitions for the same topic from many fetches into one FetchTopic. A map is internally allocated to group partitions per topic before calling fn.

func (Fetches) Errors 

func (fs Fetches) Errors() []FetchError

Errors returns all errors in a fetch with the topic and partition that errored.

func (Fetches) RecordIter 

func (fs Fetches) RecordIter() *FetchesRecordIter

RecordIter returns an iterator over all records in a fetch.

Note that errors should be inspected as well.

type FetchesRecordIter 

type FetchesRecordIter struct {
	// contains filtered or unexported fields
}

FetchesRecordIter iterates over records in a fetch.

func (*FetchesRecordIter) Done 

func (i *FetchesRecordIter) Done() bool

Done returns whether there are any more records to iterate over.

func (*FetchesRecordIter) Next 

func (i *FetchesRecordIter) Next() *Record

Next returns the next record from a fetch.

type FirstErrPromise added in v0.7.0 

type FirstErrPromise struct {
	// contains filtered or unexported fields
}

FirstErrPromise is a helper type to capture only the first failing error when producing a batch of records with this type's Promise function.

This is useful for when you only care about any record failing, and can use that as a signal (i.e., to abort a batch). The AbortingFirstErrPromise function can be used to abort all records as soon as the first error is encountered. If you do not need to abort, you can use this type with no constructor.

This is similar to using ProduceResult's FirstErr function.

func AbortingFirstErrPromise added in v0.7.4 

func AbortingFirstErrPromise(cl *Client) *FirstErrPromise

AbortingFirstErrPromise returns a FirstErrPromise that will call the client's AbortBufferedRecords function if an error is encountered.

This can be used to quickly exit when any error is encountered, rather than waiting while flushing only to discover things errored.

func (*FirstErrPromise) Err added in v0.7.0 

func (f *FirstErrPromise) Err() error

Err waits for all promises to complete and then returns any stored error.

func (*FirstErrPromise) Promise added in v0.7.0 

func (f *FirstErrPromise) Promise() func(*Record, error)

Promise returns a promise for producing that will store the first error encountered.

The returned promise must eventually be called, because a FirstErrPromise does not return from 'Err' until all promises are completed.

type GroupBalancer 

type GroupBalancer interface {
	// ProtocolName returns the name of the protocol, e.g. roundrobin,
	// range, sticky.
	ProtocolName() string

	// JoinGroupMetadata returns the metadata to use in JoinGroup, given the topic
	// interests and the current assignment and group generation.
	JoinGroupMetadata(
		topicInterests []string,
		currentAssignment map[string][]int32,
		generation int32,
	) []byte

	// ParseSyncAssignment returns assigned topics and partitions from an
	// encoded SyncGroupResponse's MemberAssignment.
	ParseSyncAssignment(assignment []byte) (map[string][]int32, error)

	// MemberBalancer returns a GroupMemberBalancer for the given group
	// members, as well as the topics that all the members are interested
	// in. If the client does not have some topics in the returned topics,
	// the client issues a metadata request to load the number of
	// partitions in those topics before calling the GroupMemberBalancer's
	// Balance function.
	//
	// The input group members are guaranteed to be sorted first by
	// instance ID, if non-nil, and then by member ID.
	//
	// It is up to the user to decide how to decode each member's
	// ProtocolMetadata field. The default client group protocol of
	// "consumer" by default uses join group metadata's of type
	// kmsg.GroupMemberMetadata. If this is the case for you, it may be
	// useful to use the ConsumerBalancer type to help parse the metadata
	// and balance.
	//
	// If the member metadata cannot be deserialized correctly, this should
	// return a relevant error.
	MemberBalancer(members []kmsg.JoinGroupResponseMember) (b GroupMemberBalancer, topics map[string]struct{}, err error)

	// IsCooperative returns if this is a cooperative balance strategy.
	IsCooperative() bool
}

GroupBalancer balances topics and partitions among group members.

func CooperativeStickyBalancer 

func CooperativeStickyBalancer() GroupBalancer

CooperativeStickyBalancer performs the sticky balancing strategy, but additionally opts the consumer group into "cooperative" rebalancing.

Cooperative rebalancing differs from "eager" (the original) rebalancing in that group members do not stop processing partitions during the rebalance. Instead, once they receive their new assignment, each member determines which partitions it needs to revoke. If any, they send a new join request (before syncing), and the process starts over. This should ultimately end up in only two join rounds, with the major benefit being that processing never needs to stop.

NOTE once a group is collectively using cooperative balancing, it is unsafe to have a member join the group that does not support cooperative balancing. If the only-eager member is elected leader, it will not know of the new multiple join strategy and things will go awry. Thus, once a group is entirely on cooperative rebalancing, it cannot go back.

Migrating an eager group to cooperative balancing requires two rolling bounce deploys. The first deploy should add the cooperative-sticky strategy as an option (that is, each member goes from using one balance strategy to two). During this deploy, Kafka will tell leaders to continue using the old eager strategy, since the old eager strategy is the only one in common among all members. The second rolling deploy removes the old eager strategy. At this point, Kafka will tell the leader to use cooperative-sticky balancing. During this roll, all members in the group that still have both strategies continue to be eager and give up all of their partitions every rebalance. However, once a member only has cooperative-sticky, it can begin using this new strategy and things will work correctly. See KIP-429 for more details.

func RangeBalancer 

func RangeBalancer() GroupBalancer

RangeBalancer returns a group balancer that, per topic, maps partitions to group members. Since this works on a topic level, uneven partitions per topic to the number of members can lead to slight partition consumption disparities.

Suppose there are two members M0 and M1, two topics t0 and t1, and each topic has three partitions p0, p1, and p2. The partition balancing will be 

M0: [t0p0, t0p1, t1p0, t1p1]
M1: [t0p2, t1p2]

This is equivalent to the Java range balancer.

func RoundRobinBalancer 

func RoundRobinBalancer() GroupBalancer

RoundRobinBalancer returns a group balancer that evenly maps topics and partitions to group members.

Suppose there are two members M0 and M1, two topics t0 and t1, and each topic has three partitions p0, p1, and p2. The partition balancing will be 

M0: [t0p0, t0p2, t1p1]
M1: [t0p1, t1p0, t1p2]

If all members subscribe to all topics equally, the roundrobin balancer will give a perfect balance. However, if topic subscriptions are quite unequal, the roundrobin balancer may lead to a bad balance. See KIP-49 for one example (note that the fair strategy mentioned in KIP-49 does not exist).

This is equivalent to the Java roundrobin balancer.

func StickyBalancer 

func StickyBalancer() GroupBalancer

StickyBalancer returns a group balancer that ensures minimal partition movement on group changes while also ensuring optimal balancing.

Suppose there are three members M0, M1, and M3, and two topics t0 and t1 each with three partitions p0, p1, and p2. If the initial balance plan looks like 

M0: [t0p0, t0p1, t0p2]
M1: [t1p0, t1p1, t1p2]
M2: [t2p0, t2p2, t2p2]

If M2 disappears, both roundrobin and range would have mostly destructive reassignments.

Range would result in 

M0: [t0p0, t0p1, t1p0, t1p1, t2p0, t2p1]
M1: [t0p2, t1p2, t2p2]

which is imbalanced and has 3 partitions move from members that did not need to move (t0p2, t1p0, t1p1).

RoundRobin would result in 

M0: [t0p0, t0p2, t1p1, t2p0, t2p2]
M1: [t0p1, t1p0, t1p2, t2p1]

which is balanced, but has 2 partitions move when they do not need to (t0p1, t1p1).

Sticky balancing results in 

M0: [t0p0, t0p1, t0p2, t2p0, t2p2]
M1: [t1p0, t1p1, t1p2, t2p1]

which is balanced and does not cause any unnecessary partition movement. The actual t2 partitions may not be in that exact combination, but they will be balanced.

An advantage of the sticky consumer is that it allows API users to potentially avoid some cleanup until after the consumer knows which partitions it is losing when it gets its new assignment. Users can then only cleanup state for partitions that changed, which will be minimal (see KIP-54; this client also includes the KIP-351 bugfix).

Note that this API implements the sticky partitioning quite differently from the Java implementation. The Java implementaiton is difficult to reason about and has many edge cases that result in non-optimal balancing (albeit, you likely have to be trying to hit those edge cases). This API uses a different algorithm to ensure optimal balancing while being an order of magnitude faster.

Since the new strategy is a strict improvement over the Java strategy, it is entirely compatible. Any Go client sharing a group with a Java client will not have its decisions undone on leadership change from a Go consumer to a Java one. Java balancers do not apply the strategy it comes up with if it deems the balance score equal to or worse than the original score (the score being effectively equal to the standard deviation of the mean number of assigned partitions). This Go sticky balancer is optimal and extra sticky. Thus, the Java balancer will never back out of a strategy from this balancer.

type GroupMemberBalancer added in v0.7.0 

type GroupMemberBalancer interface {
	// Balance balances topics and partitions among group members, where
	// the int32 in the topics map corresponds to the number of partitions
	// known to be in each topic.
	Balance(topics map[string]int32) IntoSyncAssignment
}

GroupMemberBalancer balances topics amongst group members.

type GroupOpt 

type GroupOpt interface {
	// contains filtered or unexported methods
}

GroupOpt is an option to configure group consuming.

func AutoCommitInterval 

func AutoCommitInterval(interval time.Duration) GroupOpt

AutoCommitInterval sets how long to go between autocommits, overriding the default 5s.

func Balancers 

func Balancers(balancers ...GroupBalancer) GroupOpt

Balancers sets the group balancers to use for dividing topic partitions among group members, overriding the defaults.

The current default is [cooperative-sticky].

For balancing, Kafka chooses the first protocol that all group members agree to support.

Note that if you want to opt in to cooperative-sticky rebalancing, cooperative group balancing is incompatible with eager (classical) rebalancing and requires a careful rollout strategy (see KIP-429).

func CommitCallback added in v0.7.0 

func CommitCallback(fn func(*kmsg.OffsetCommitRequest, *kmsg.OffsetCommitResponse, error)) GroupOpt

CommitCallback sets the callback to use if autocommitting is enabled. This overrides the default callback that logs errors and continues.

func DisableAutoCommit 

func DisableAutoCommit() GroupOpt

DisableAutoCommit disable auto committing.

func GroupProtocol added in v0.6.10 

func GroupProtocol(protocol string) GroupOpt

GroupProtocol sets the group's join protocol, overriding the default value "consumer". The only reason to override this is if you are implementing custom join and sync group logic.

func GroupTopics 

func GroupTopics(topics ...string) GroupOpt

GroupTopics adds topics to use for group consuming.

func GroupTopicsRegex 

func GroupTopicsRegex() GroupOpt

GroupTopicsRegex sets all topics in GroupTopics to be parsed as regular expressions.

func HeartbeatInterval 

func HeartbeatInterval(interval time.Duration) GroupOpt

HeartbeatInterval sets how long a group member goes between heartbeats to Kafka, overriding the default 3,000ms.

Kafka uses heartbeats to ensure that a group member's session stays active. This value can be any value lower than the session timeout, but should be no higher than 1/3rd the session timeout.

This corresponds to Kafka's heartbeat.interval.ms.

func InstanceID 

func InstanceID(id string) GroupOpt

InstanceID sets the group consumer's instance ID, switching the group member from "dynamic" to "static".

Prior to Kafka 2.3.0, joining a group gave a group member a new member ID. The group leader could not tell if this was a rejoining member. Thus, any join caused the group to rebalance.

Kafka 2.3.0 introduced the concept of an instance ID, which can persist across restarts. This allows for avoiding many costly rebalances and allows for stickier rebalancing for rejoining members (since the ID for balancing stays the same). The main downsides are that you, the user of a client, have to manage instance IDs properly, and that it may take longer to rebalance in the event that a client legitimately dies.

When using an instance ID, the client does NOT send a leave group request when closing. This allows for the client ot restart with the same instance ID and rejoin the group to avoid a rebalance. It is strongly recommended to increase the session timeout enough to allow time for the restart (remember that the default session timeout is 10s).

To actually leave the group, you must use an external admin command that issues a leave group request on behalf of this instance ID (see kcl), or you can manually use the kmsg package with a proper LeaveGroupRequest.

NOTE: Leaving a group with an instance ID is only supported in Kafka 2.4.0+.

func OnAssigned 

func OnAssigned(onAssigned func(context.Context, map[string][]int32)) GroupOpt

OnAssigned sets the function to be called when a group is joined after partitions are assigned before fetches for those partitions begin.

This function combined with OnRevoked should not exceed the rebalance interval. It is possible for the group, immediately after finishing a balance, to re-enter a new balancing session.

The OnAssigned function is passed the group's context, which is only canceled if the group is left or the client is closed.

func OnLost 

func OnLost(onLost func(context.Context, map[string][]int32)) GroupOpt

OnLost sets the function to be called on "fatal" group errors, such as IllegalGeneration, UnknownMemberID, and authentication failures. This function differs from OnRevoked in that it is unlikely that commits will succeed when partitions are outright lost, whereas commits likely will succeed when revoking partitions.

If not set, OnRevoked is used.

func OnRevoked 

func OnRevoked(onRevoked func(context.Context, map[string][]int32)) GroupOpt

OnRevoked sets the function to be called once this group member has partitions revoked.

This function combined with OnAssigned should not exceed the rebalance interval. It is possible for the group, immediately after finishing a balance, to re-enter a new balancing session.

If autocommit is enabled, the default OnRevoked is a blocking commit all offsets. The reason for a blocking commit is so that no later commit cancels the blocking commit. If the commit in OnRevoked were canceled, then the rebalance would proceed immediately, the commit that canceled the blocking commit would fail, and duplicates could be consumed after the rebalance completes.

The OnRevoked function is passed the group's context, which is only canceled if the group is left or the client is closed.

OnRevoked function is called at the end of a group session even if there are no partitions being revoked.

If you are committing offsets manually (have disabled autocommitting), it is highly recommended to do a proper blocking commit in OnRevoked.

func RebalanceTimeout 

func RebalanceTimeout(timeout time.Duration) GroupOpt

RebalanceTimeout sets how long group members are allowed to take when a a rebalance has begun, overriding the default 60,000ms. This timeout is how long all members are allowed to complete work and commit offsets, minus the time it took to detect the rebalance (from a heartbeat).

Kafka uses the largest rebalance timeout of all members in the group. If a member does not rejoin within this timeout, Kafka will kick that member from the group.

This corresponds to Kafka's rebalance.timeout.ms.

func RequireStableFetchOffsets 

func RequireStableFetchOffsets() GroupOpt

RequireStableFetchOffsets sets the group consumer to require "stable" fetch offsets before consuming from the group. Proposed in KIP-447 and introduced in Kafka 2.5.0, stable offsets are important when consuming from partitions that a transactional producer could be committing to.

With this option, Kafka will block group consumers from fetching offsets for partitions that are in an active transaction.

Because this can block consumption, it is strongly recommended to set transactional timeouts to a small value (10s) rather than the default 60s. Lowering the transactional timeout will reduce the chance that consumers are entirely blocked.

func SessionTimeout 

func SessionTimeout(timeout time.Duration) GroupOpt

SessionTimeout sets how long a member the group can go between heartbeats, overriding the default 45,000ms. If a member does not heartbeat in this timeout, the broker will remove the member from the group and initiate a rebalance.

If you are using a GroupTransactSession for EOS, wish to lower this, and are talking to a Kafka cluster pre 2.5.0, consider lowering the TransactionTimeout. If you do not, you risk a transaction finishing after a group has rebalanced, which could lead to duplicate processing. If you are talking to a Kafka 2.5.0+ cluster, you can safely use the RequireStableFetchOffsets group option and prevent any problems.

This option corresponds to Kafka's session.timeout.ms setting and must be within the broker's group.min.session.timeout.ms and group.max.session.timeout.ms.

type GroupTransactSession 

type GroupTransactSession struct {
	// contains filtered or unexported fields
}

GroupTransactSession abstracts away the proper way to begin a transaction and more importantly how to end a transaction when consuming in a group, modifying records, and producing (EOS transaction).

func (*GroupTransactSession) Begin 

func (s *GroupTransactSession) Begin() error

Begin begins a transaction, returning an error if the client has no transactional id or is already in a transaction.

Begin must be called before producing records in a transaction.

Note that a revoke of any partitions sets the session's revoked state, even if the session has not begun. This state is only reset on EndTransaction. Thus, it is safe to begin transactions after a poll (but still before you produce).

func (*GroupTransactSession) End 

func (s *GroupTransactSession) End(ctx context.Context, commit TransactionEndTry) (bool, error)

End ends a transaction, committing if commit is true, if the group did not rebalance since the transaction began, and if committing offsets is successful. If commit is false, the group has rebalanced, or any partition in committing offsets fails, this aborts.

This function calls Flush or AbortBufferedRecords depending on the commit status. If you are flushing, it is strongly recommended to Flush yourself before calling this, so that you can then determine if you need to abort.

This returns whether the transaction committed or any error that occurred. No returned error is retriable. Either the transactional ID has entered a failed state, or the client retried so much that the retry limit was hit, and odds are you should not continue.

Note that canceling the context will likely leave the client in an undesirable state, because canceling the context cancels in flight requests and prevents new requests (multiple requests are issued at the end of a transact session). Thus, while a context is allowed, it is strongly recommended to not cancel it.

func (*GroupTransactSession) PollFetches added in v0.6.10 

func (s *GroupTransactSession) PollFetches(ctx context.Context) Fetches

PollFetches is a wrapper around Client.PollFetches, with the exact same semantics. Please refer to that function's documentation.

It is invalid to call PollFetches concurrently with Begin or End.

func (*GroupTransactSession) PollRecords added in v0.6.10 

func (s *GroupTransactSession) PollRecords(ctx context.Context, maxPollRecords int) Fetches

PollRecords is a wrapper around Client.PollRecords, with the exact same semantics. Please refer to that function's documentation.

It is invalid to call PollRecords concurrently with Begin or End.

func (*GroupTransactSession) Produce added in v0.6.10 

func (s *GroupTransactSession) Produce(ctx context.Context, r *Record, promise func(*Record, error))

Produce is a wrapper around Client.Produce, with the exact same semantics. Please refer to that function's documentation.

It is invalid to call Produce concurrently with Begin or End.

func (*GroupTransactSession) ProduceSync added in v0.7.0 

func (s *GroupTransactSession) ProduceSync(ctx context.Context, rs ...*Record) ProduceResults

ProduceSync is a wrapper around Client.ProduceSync, with the exact same semantics. Please refer to that function's documentation.

It is invalid to call ProduceSync concurrently with Begin or End.

type Hook 

type Hook interface{}

Hook is a hook to be called when something happens in kgo.

The base Hook interface is useless, but wherever a hook can occur in kgo, the client checks if your hook implements an appropriate interface. If so, your hook is called.

This allows you to only hook in to behavior you care about, and it allows the client to add more hooks in the future.

All hook interfaces in this package have Hook in the name. Hooks must be safe for concurrent use. It is expected that hooks are fast; if a hook needs to take time, then copy what you need and ensure the hook is async.

type HookBrokerConnect added in v0.7.0 

type HookBrokerConnect interface {
	// OnConnect is passed the broker metadata, how long it took to dial,
	// and either the dial's resulting net.Conn or error.
	OnConnect(meta BrokerMetadata, dialDur time.Duration, conn net.Conn, err error)
}

HookBrokerConnect is called after a connection to a broker is opened.

type HookBrokerDisconnect added in v0.7.0 

type HookBrokerDisconnect interface {
	// OnDisconnect is passed the broker metadata and the connection that
	// is closing.
	OnDisconnect(meta BrokerMetadata, conn net.Conn)
}

HookBrokerDisconnect is called when a connection to a broker is closed.

type HookBrokerE2E added in v0.7.7 

type HookBrokerE2E interface {
	// OnE2E is passed the broker metadata, the key for the
	// request/response that was written/read, and the e2e info for the
	// request and response.
	OnE2E(meta BrokerMetadata, key int16, e2e E2EInfo)
}

HookBrokerE2E is called after a write to a broker that errors, or after a read to a broker.

This differs from HookBrokerRead and HookBrokerWrite by tracking all E2E info for a write and a read, which allows for easier e2e metrics. This hook can replace both the read and write hook.

type HookBrokerRead added in v0.7.0 

type HookBrokerRead interface {
	// OnRead is passed the broker metadata, the key for the response that
	// was read, the number of bytes read (may not be the whole read if
	// there was an error), how long the client waited before reading the
	// response, how long it took to read the response, and any error.
	//
	// The bytes read does not count any tls overhead.
	OnRead(meta BrokerMetadata, key int16, bytesRead int, readWait, timeToRead time.Duration, err error)
}

HookBrokerRead is called after a read from a broker.

Kerberos SASL does not cause read hooks, since it directly reads from the connection.

type HookBrokerThrottle added in v0.7.0 

type HookBrokerThrottle interface {
	// OnThrottle is passed the broker metadata, the imposed throttling
	// interval, and whether the throttle was applied before Kafka
	// responded to them request or after.
	//
	// For Kafka < 2.0.0, the throttle is applied before issuing a response.
	// For Kafka >= 2.0.0, the throttle is applied after issuing a response.
	//
	// If throttledAfterResponse is false, then Kafka already applied the
	// throttle. If it is true, the client internally will not send another
	// request until the throttle deadline has passed.
	OnThrottle(meta BrokerMetadata, throttleInterval time.Duration, throttledAfterResponse bool)
}

HookBrokerThrottle is called after a response to a request is read from a broker, and the response identifies throttling in effect.

type HookBrokerWrite added in v0.7.0 

type HookBrokerWrite interface {
	// OnWrite is passed the broker metadata, the key for the request that
	// was written, the number of bytes that were written (may not be the
	// whole request if there was an error), how long the request waited
	// before being written (including throttling waiting), how long it
	// took to write the request, and any error.
	//
	// The bytes written does not count any tls overhead.
	OnWrite(meta BrokerMetadata, key int16, bytesWritten int, writeWait, timeToWrite time.Duration, err error)
}

HookBrokerWrite is called after a write to a broker.

Kerberos SASL does not cause write hooks, since it directly writes to the connection.

type HookGroupManageError added in v0.7.0 

type HookGroupManageError interface {
	// OnGroupManageError is passed the error that killed a group session.
	// This can be used to detect potentially fatal errors and act on them
	// at runtime to recover (such as group auth errors, or group max size
	// reached).
	OnGroupManageError(error)
}

HookGroupManageError is called after every error that causes the client, operating as a group member, to break out of the group managing loop and backoff temporarily.

Specifically, any error that would result in OnLost being called will result in this hook being called.

type IntoSyncAssignment added in v0.7.0 

type IntoSyncAssignment interface {
	IntoSyncAssignment() []kmsg.SyncGroupRequestGroupAssignment
}

IntoSyncAssignment takes a balance plan and returns a list of assignments to use in a kmsg.SyncGroupRequest.

type IsolationLevel 

type IsolationLevel struct {
	// contains filtered or unexported fields
}

IsolationLevel controls whether uncommitted or only committed records are returned from fetch requests.

func ReadCommitted 

func ReadCommitted() IsolationLevel

ReadCommitted is an isolation level to only fetch committed records.

func ReadUncommitted 

func ReadUncommitted() IsolationLevel

ReadUncommitted (the default) is an isolation level that returns the latest produced records, be they committed or not.

type LogLevel 

type LogLevel int8

LogLevel designates which level the logger should log at. 

const (
	// LogLevelNone disables logging.
	LogLevelNone LogLevel = iota
	// LogLevelError logs all errors. Generally, these should not happen.
	LogLevelError
	// LogLevelWarn logs all warnings, such as request failures.
	LogLevelWarn
	// LogLevelInfo logs informational messages, such as requests. This is
	// usually the default log level.
	LogLevelInfo
	// LogLevelDebug logs verbose information, and is usually not used in
	// production.
	LogLevelDebug
)

func (LogLevel) String 

func (l LogLevel) String() string

type Logger 

type Logger interface {
	// Level returns the log level to log at.
	//
	// Implementations can change their log level on the fly, but this
	// function must be safe to call concurrently.
	Level() LogLevel

	// Log logs a message with key, value pair arguments for the given log
	// level.
	//
	// This must be safe to call concurrently.
	Log(level LogLevel, msg string, keyvals ...interface{})
}

Logger is used to log informational messages.

func BasicLogger 

func BasicLogger(dst io.Writer, level LogLevel, prefixFn func() string) Logger

BasicLogger returns a logger that will print to dst in the following format: 

prefix [LEVEL] message; key: val, key: val

prefixFn is optional; if non-nil, it is called for a per-message prefix.

Writes to dst are not checked for errors.

type Offset 

type Offset struct {
	// contains filtered or unexported fields
}

Offset is a message offset in a partition.

func NewOffset 

func NewOffset() Offset

NewOffsetcreates and returns an offset to use in AssignPartitions.

The default offset begins at the end.

func (Offset) At 

func (o Offset) At(at int64) Offset

At returns a copy of the calling offset, changing the returned offset to begin at exactly the requested offset.

There are two potential special offsets to use: -2 allows for consuming at the start, and -1 allows for consuming at the end. These two offsets are equivalent to calling AtStart or AtEnd.

If the offset is less than -2, the client bounds it to -2 to consume at the start.

func (Offset) AtEnd 

func (o Offset) AtEnd() Offset

AtEnd returns a copy of the calling offset, changing the returned offset to begin at the end of a partition.

func (Offset) AtStart 

func (o Offset) AtStart() Offset

AtStart returns a copy of the calling offset, changing the returned offset to begin at the beginning of a partition.

func (Offset) Relative 

func (o Offset) Relative(n int64) Offset

Relative returns a copy of the calling offset, changing the returned offset to be n relative to what it currently is. If the offset is beginning at the end, Relative(-100) will begin 100 before the end.

func (Offset) WithEpoch 

func (o Offset) WithEpoch(e int32) Offset

WithEpoch returns a copy of the calling offset, changing the returned offset to use the given epoch. This epoch is used for truncation detection; the default of -1 implies no truncation detection.

type Opt 

type Opt interface {
	// contains filtered or unexported methods
}

Opt is an option to configure a client.

func AutoTopicCreation 

func AutoTopicCreation() Opt

AutoTopicCreation enables topics to be auto created if they do not exist when fetching their metadata.

func BrokerConnDeadRetries 

func BrokerConnDeadRetries(n int) Opt

BrokerConnDeadRetries sets the number of tries that are allowed for requests that fail before a response is even received, overriding the default 20.

These retries are for cases where a connection to a broker fails during a request. Generally, you just must retry these requests anyway. However, if Kafka cannot understand our request, it closes a connection deliberately. Since the client cannot differentiate this case, we upper bound the number of times we allow a connection to be cut before we call it quits on the request, assuming that if a connection is cut *so many times* repeatedly, then it is likely not the network but instead Kafka indicating a problem.

This can only be triggered by connection read or write failures, indicating Kafka closed the connection (or the connection actually just died).

This setting applies to all but internally generated fetch and produce requests.

func BrokerMaxReadBytes added in v0.6.2 

func BrokerMaxReadBytes(v int32) Opt

BrokerMaxReadBytes sets the maximum response size that can be read from Kafka, overriding the default 100MiB.

This is a safety measure to avoid OOMing on invalid responses. This is slightly double FetchMaxBytes; if bumping that, consider bump this. No other response should run the risk of hitting this limit.

func BrokerMaxWriteBytes 

func BrokerMaxWriteBytes(v int32) Opt

BrokerMaxWriteBytes upper bounds the number of bytes written to a broker connection in a single write, overriding the default 100MiB.

This number corresponds to the a broker's socket.request.max.bytes, which defaults to 100MiB.

The only Kafka request that could come reasonable close to hitting this limit should be produce requests, and thus this limit is only enforced for produce requests.

func ClientID 

func ClientID(id string) Opt

ClientID uses id for all requests sent to Kafka brokers, overriding the default "kgo".

func ConnIdleTimeout added in v0.6.11 

func ConnIdleTimeout(timeout time.Duration) Opt

ConnIdleTimeout is a rough amount of time to allow connections to idle before they are closed, overriding the default 20.

In the worst case, a connection can be allowed to idle for up to 2x this time, while the average is expected to be 1.5x (essentially, a uniform distribution from this interval to 2x the interval).

It is possible that a connection can be reaped just as it is about to be written to, but the client internally retries in these cases.

Connections are not reaped if they are actively being written to or read from; thus, a request can take a really long time itself and not be reaped (however, this may lead to the ConnTimeoutOverhead).

func ConnTimeoutOverhead 

func ConnTimeoutOverhead(overhead time.Duration) Opt

ConnTimeoutOverhead uses the given time as overhead while deadlining requests, overriding the default overhead of 20s.

For most requests, the overhead will simply be this timeout. However, for any request with a TimeoutMillis field, the overhead is added on top of the request's TimeoutMillis. This ensures that we give Kafka enough time to actually process the request given the timeout, while still having a deadline on the connection as a whole to ensure it does not hang.

For writes, the timeout is always the overhead. We buffer writes in our client before one quick flush, so we always expect the write to be fast.

func Dialer 

func Dialer(fn func(ctx context.Context, network, host string) (net.Conn, error)) Opt

Dialer uses fn to dial addresses, overriding the default dialer that uses a 10s dial timeout and no TLS.

The context passed to the dial function is the context used in the request that caused the dial. If the request is a client-internal request, the context is the context on the client itself (which is canceled when the client is closed).

This function has the same signature as net.Dialer's DialContext and tls.Dialer's DialContext, meaning you can use this function like so: 

kgo.Dialer((&net.Dialer{Timeout: 10*time.Second}).DialContext)

or 

kgo.Dialer((&tls.Dialer{...})}.DialContext)

func DisableClientID 

func DisableClientID() Opt

DisableClientID sets the client ID to null for all requests sent to Kafka brokers, overriding the default "kgo".

func MaxVersions 

func MaxVersions(versions *kversion.Versions) Opt

MaxVersions sets the maximum Kafka version to try, overriding the internal unbounded (latest stable) versions.

Note that specific max version pinning is required if trying to interact with versions pre 0.10.0. Otherwise, unless using more complicated requests that this client itself does not natively use, it is generally safe to opt for the latest version. If using the kmsg package directly to issue requests, it is recommended to pin versions so that new fields on requests do not get invalid default zero values before you update your usage.

func MetadataMaxAge 

func MetadataMaxAge(age time.Duration) Opt

MetadataMaxAge sets the maximum age for the client's cached metadata, overriding the default 5m, to allow detection of new topics, partitions, etc.

This corresponds to Kafka's metadata.max.age.ms.

func MetadataMinAge 

func MetadataMinAge(age time.Duration) Opt

MetadataMinAge sets the minimum time between metadata queries, overriding the default 10s. You may want to raise or lower this to reduce the number of metadata queries the client will make. Notably, if metadata detects an error in any topic or partition, it triggers itself to update as soon as allowed. Additionally, any connection failures causing backoff while producing or consuming trigger metadata updates, because the client must assume that maybe the connection died due to a broker dying.

func MinVersions added in v0.6.2 

func MinVersions(versions *kversion.Versions) Opt

MinVersions sets the minimum Kafka version a request can be downgraded to, overriding the default of the lowest version.

This option is useful if you are issuing requests that you absolutely do not want to be downgraded; that is, if you are relying on features in newer requests, and you are not sure if your brokers can handle those features. By setting a min version, if the client detects it needs to downgrade past the version, it will instead avoid issuing the request.

Unlike MaxVersions, if a request is issued that is unknown to the min versions, the request is allowed. It is assumed that there is no lower bound for that request.

func ProduceRetries added in v0.6.11 

func ProduceRetries(n int) Opt

ProduceRetries sets the number of tries for producing records, overriding the unlimited default.

If idempotency is enabled (as it is by default), this option is only enforced if it is safe to do so without creating invalid sequence numbers. It is safe to enforce if a record was never issued in a request to Kafka, or if it was requested and received a response.

This option is different from RequestRetries to allow finer grained control of when to fail when producing records.

func RequestRetries 

func RequestRetries(n int) Opt

RequestRetries sets the number of tries that retriable requests are allowed, overriding the unlimited default. This option does not apply to produce requests; to limit produce request retries, see ProduceRetries.

func RetryBackoff 

func RetryBackoff(backoff func(int) time.Duration) Opt

RetryBackoff sets the backoff strategy for how long to backoff for a given amount of retries, overriding the default exponential backoff that ranges from 100ms min to 1s max.

This (roughly) corresponds to Kafka's retry.backoff.ms setting and retry.backoff.max.ms (which is being introduced with KIP-500).

func RetryTimeout 

func RetryTimeout(t func(int16) time.Duration) Opt

RetryTimeout sets the upper limit on how long we allow requests to retry, overriding the default of 5m for EndTxn requests, 1m for all others.

This timeout applies to any request issued through a client's Request function. It does not apply to fetches nor produces.

The function is called with the request key that is being retried. While it is not expected that the request key will be used, including it gives users the opportinuty to have different retry timeouts for different keys.

If the function returns zero, there is no retry timeout.

The timeout is evaluated after a request is issued. If a retry backoff places the next request past the retry timeout deadline, the request will still be tried once more once the backoff expires.

func SASL 

func SASL(sasls ...sasl.Mechanism) Opt

SASL appends sasl authentication options to use for all connections.

SASL is tried in order; if the broker supports the first mechanism, all connections will use that mechanism. If the first mechanism fails, the client will pick the first supported mechanism. If the broker does not support any client mechanisms, connections will fail.

func SeedBrokers 

func SeedBrokers(seeds ...string) Opt

SeedBrokers sets the seed brokers for the client to use, overriding the default 127.0.0.1:9092.

Any seeds that are missing a port use the default Kafka port 9092.

func SoftwareNameAndVersion 

func SoftwareNameAndVersion(name, version string) Opt

SoftwareNameAndVersion sets the client software name and version that will be sent to Kafka as part of the ApiVersions request as of Kafka 2.4.0, overriding the default "kgo" and internal version number.

Kafka exposes this through metrics to help operators understand the impact of clients.

It is generally not recommended to set this. As well, if you do, the name and version must match the following regular expression: 

[a-zA-Z0-9](?:[a-zA-Z0-9\\-.]*[a-zA-Z0-9])?

Note this means neither the name nor version can be empty.

func WithHooks 

func WithHooks(hooks ...Hook) Opt

WithHooks sets hooks to call whenever relevant.

Hooks can be used to layer in metrics (such as Prometheus hooks) or anything else. The client will call all hooks in order. See the Hooks interface for more information, as well as any interface that contains "Hook" in the name to know the available hooks. A single hook can implement zero or all hook interfaces, and only the hooks that it implements will be called.

func WithLogger 

func WithLogger(l Logger) Opt

WithLogger sets the client to use the given logger, overriding the default to not use a logger.

It is invalid to use a nil logger; doing so will cause panics.

type Partitioner 

type Partitioner interface {
	// forTopic returns a partitioner for an individual topic. It is
	// guaranteed that only one record will use the an individual topic's
	// topicPartitioner at a time, meaning partitioning within a topic does
	// not require locks.
	ForTopic(string) TopicPartitioner
}

Partitioner creates topic partitioners to determine which partition messages should be sent to.

func StickyKeyPartitioner 

func StickyKeyPartitioner(overrideHasher PartitionerHasher) Partitioner

StickyKeyPartitioner mirrors the default Java partitioner from Kafka's 2.4.0 release (see KAFKA-8601).

This is the same "hash the key consistently, if no key, choose random partition" strategy that the Java partitioner has always used, but rather than always choosing a random partition, the partitioner pins a partition to produce to until that partition rolls over to a new batch. Only when rolling to new batches does this partitioner switch partitions.

The benefit with this pinning is less CPU utilization on Kafka brokers. Over time, the random distribution is the same, but the brokers are handling on average larger batches.

overrideHasher is optional; if nil, this will return a partitioner that partitions exactly how Kafka does. Specifically, the partitioner will use murmur2 to hash keys, will mask out the 32nd bit, and then will mod by the number of potential partitions.

func StickyPartitioner 

func StickyPartitioner() Partitioner

StickyPartitioner is the same as StickyKeyPartitioner, but with no logic to consistently hash keys. That is, this only partitions according to the sticky partition strategy.

type PartitionerHasher 

type PartitionerHasher func([]byte, int) int

PartitionerHasher returns a partition to use given the input data and number of partitions.

func KafkaHasher 

func KafkaHasher(hashFn func([]byte) uint32) PartitionerHasher

KafkaHasher returns a PartitionerHasher using hashFn that mirrors how Kafka partitions after hashing data.

func SaramaHasher 

func SaramaHasher(hashFn func([]byte) uint32) PartitionerHasher

SaramaHasher returns a PartitionerHasher using hashFn that mirrors how Sarama partitions after hashing data.

type ProduceResult added in v0.7.0 

type ProduceResult struct {
	// Record is the produced record. It is always non-nil.
	//
	// If this record was produced successfully, its attrs / offset / id /
	// epoch / etc. fields are filled in on return if possible (i.e. when
	// producing with acks required).
	Record *Record

	// Err is a potential produce error. If this is non-nil, the record was
	// not produced successfully.
	Err error
}

ProduceResult is the result of producing a record in a synchronous manner.

type ProduceResults added in v0.7.0 

type ProduceResults []ProduceResult

ProduceResults is a collection of produce results.

func (ProduceResults) First added in v0.7.0 

func (rs ProduceResults) First() (*Record, error)

First the first record and error in the produce results.

This function is useful if you only passed one record to ProduceSync.

func (ProduceResults) FirstErr added in v0.7.0 

func (rs ProduceResults) FirstErr() error

FirstErr returns the first erroring result, if any.

type ProducerOpt 

type ProducerOpt interface {
	Opt
	// contains filtered or unexported methods
}

ProducerOpt is a producer-specific option to configure a client. This is simply a namespaced Opt.

func BatchCompression 

func BatchCompression(preference ...CompressionCodec) ProducerOpt

BatchCompression sets the compression codec to use for producing records.

Compression is chosen in the order preferred based on broker support. For example, zstd compression was introduced in Kafka 2.1.0, so the preference can be first zstd, fallback snappy, fallback none.

The default preference is [snappy, none], which should be fine for all old consumers since snappy compression has existed since Kafka 0.8.0. To use zstd, your brokers must be at least 2.1.0 and all consumers must be upgraded to support decoding zstd records.

func BatchMaxBytes 

func BatchMaxBytes(v int32) ProducerOpt

BatchMaxBytes upper bounds the size of a record batch, overriding the default 1MB.

This corresponds to Kafka's max.message.bytes, which defaults to 1,000,012 bytes (just over 1MB).

Record batches are independent of a ProduceRequest: a record batch is specific to a topic and partition, whereas the produce request can contain many record batches for many topics.

If a single record encodes larger than this number (before compression), it will will not be written and a callback will have the appropriate error.

Note that this is the maximum size of a record batch before compression. If a batch compresses poorly and actually grows the batch, the uncompressed form will be used.

func DisableIdempotentWrite added in v0.6.10 

func DisableIdempotentWrite() ProducerOpt

DisableIdempotentWrite disables idempotent produce requests, opting out of Kafka server-side deduplication in the face of reissued requests due to transient network problems.

Idempotent production is strictly a win, but does require the IDEMPOTENT_WRITE permission on CLUSTER, and not all clients can have that permission.

This option is incompatible with specifying a transactional id.

func Linger 

func Linger(linger time.Duration) ProducerOpt

Linger sets how long individual topic partitions will linger waiting for more records before triggering a request to be built.

Note that this option should only be used in low volume producers. The only benefit of lingering is to potentially build a larger batch to reduce cpu usage on the brokers if you have many producers all producing small amounts.

If a produce request is triggered by any topic partition, all partitions with a possible batch to be sent are used and all lingers are reset.

As mentioned, the linger is specific to topic partition. A high volume producer will likely be producing to many partitions; it is both unnecessary to linger in this case and inefficient because the client will have many timers running (and stopping and restarting) unnecessarily.

func ManualFlushing 

func ManualFlushing() ProducerOpt

ManualFlushing disables auto-flushing when producing. While you can still set lingering, it would be useless to do so.

With manual flushing, producing while MaxBufferedRecords have already been produced and not flushed will return ErrMaxBuffered.

func MaxBufferedRecords 

func MaxBufferedRecords(n int) ProducerOpt

MaxBufferedRecords sets the max amount of records the client will buffer, blocking produces until records are finished if this limit is reached. This overrides the unbounded default.

func OnDataLoss 

func OnDataLoss(fn func(string, int32)) ProducerOpt

OnDataLoss sets a function to call if data loss is detected when producing records if the client is configured to continue on data loss. Thus, this option is mutually exclusive with StopOnDataLoss.

The passed function will be called with the topic and partition that data loss was detected on.

func ProduceRequestTimeout 

func ProduceRequestTimeout(limit time.Duration) ProducerOpt

ProduceRequestTimeout sets how long Kafka broker's are allowed to respond to produce requests, overriding the default 30s. If a broker exceeds this duration, it will reply with a request timeout error.

This corresponds to Kafka's request.timeout.ms setting, but only applies to produce requests.

func ProduceTopic added in v0.7.0 

func ProduceTopic(t string) ProducerOpt

ProduceTopic sets the default topic to produce to if the topic field is empty in a kgo.Record.

If this option is not used, if a record has an empty topic, the record cannot be produced and will be failed immediately.

func RecordPartitioner 

func RecordPartitioner(partitioner Partitioner) ProducerOpt

RecordPartitioner uses the given partitioner to partition records, overriding the default StickyKeyPartitioner.

func RecordTimeout 

func RecordTimeout(timeout time.Duration) ProducerOpt

RecordTimeout sets a rough time of how long a record can sit around in a batch before timing out, overriding the ulimited default.

If idempotency is enabled (as it is by default), this option is only enforced if it is safe to do so without creating invalid sequence numbers. It is safe to enforce if a record was never issued in a request to Kafka, or if it was requested and received a response.

The timeout for all records in a batch inherit the timeout of the first record in that batch. That is, once the first record's timeout expires, all records in the batch are expired. This generally is a non-issue unless using this option with lingering. In that case, simply add the linger to the record timeout to avoid problems.

The timeout is only evaluated evaluated before writing a request or after a produce response. Thus, a sink backoff may delay record timeout slightly.

func RequiredAcks 

func RequiredAcks(acks Acks) ProducerOpt

RequiredAcks sets the required acks for produced records, overriding the default RequireAllISRAcks.

func StopOnDataLoss 

func StopOnDataLoss() ProducerOpt

StopOnDataLoss sets the client to stop producing if data loss is detected, overriding the default false.

Note that if using this option, it is strongly recommended to not have a retry limit. Doing so may lead to errors where the client fails a batch on a recoverable error, which internally bumps the idempotent sequence number used for producing, which may then later cause an inadvertent out of order sequence number and false "data loss" detection.

func TransactionTimeout 

func TransactionTimeout(timeout time.Duration) ProducerOpt

TransactionTimeout sets the allowed for a transaction, overriding the default 40s. It is a good idea to keep this less than a group's session timeout, so that a group member will always be alive for the duration of a transaction even if connectivity dies. This helps prevent a transaction finishing after a rebalance, which is problematic pre-Kafka 2.5.0. If you are on Kafka 2.5.0+, then you can use the RequireStableFetchOffsets option when assigning the group, and you can set this to whatever you would like.

Transaction timeouts begin when the first record is produced within a transaction, not when a transaction begins.

func TransactionalID 

func TransactionalID(id string) ProducerOpt

TransactionalID sets a transactional ID for the client, ensuring that records are produced transactionally under this ID (exactly once semantics).

For Kafka-to-Kafka transactions, the transactional ID is only one half of the equation. You must also assign a group to consume from.

To produce transactionally, you first BeginTransaction, then produce records consumed from a group, then you EndTransaction. All records prodcued outside of a transaction will fail immediately with an error.

After producing a batch, you must commit what you consumed. Auto committing offsets is disabled during transactional consuming / producing.

Note that, unless using Kafka 2.5.0, a consumer group rebalance may be problematic. Production should finish and be committed before the client rejoins the group. It may be safer to use an eager group balancer and just abort the transaction. Alternatively, any time a partition is revoked, you could abort the transaction and reset offsets being consumed.

If the client detects an unrecoverable error, all records produced thereafter will fail.

Lastly, the default read level is READ_UNCOMMITTED. Be sure to use the ReadIsolationLevel option if you want to only read committed.

type Record 

type Record struct {
	// Key is an optional field that can be used for partition assignment.
	//
	// This is generally used with a hash partitioner to cause all records
	// with the same key to go to the same partition.
	Key []byte
	// Value is blob of data to write to Kafka.
	Value []byte

	// Headers are optional key/value pairs that are passed along with
	// records.
	//
	// These are purely for producers and consumers; Kafka does not look at
	// this field and only writes it to disk.
	Headers []RecordHeader

	// Timestamp is the timestamp that will be used for this record.
	//
	// Record batches are always written with "CreateTime", meaning that
	// timestamps are generated by clients rather than brokers.
	//
	// This field is always set in Produce.
	Timestamp time.Time

	// Topic is the topic that a record is written to.
	//
	// This must be set for producing.
	Topic string

	// Partition is the partition that a record is written to.
	//
	// For producing, this is left unset. This will be set by the client
	// as appropriate.
	Partition int32

	// Attrs specifies what attributes were on this record.
	Attrs RecordAttrs

	// ProducerEpoch is the producer epoch of this message if it was
	// produced with a producer ID. An epoch and ID of 0 means it was not.
	//
	// For producing, this is left unset. This will be set by the client
	// as appropriate.
	ProducerEpoch int16

	// ProducerEpoch is the producer ID of this message if it was produced
	// with a producer ID. An epoch and ID of 0 means it was not.
	//
	// For producing, this is left unset. This will be set by the client
	// as appropriate.
	ProducerID int64

	// LeaderEpoch is the leader epoch of the broker at the time this
	// record was written, or -1 if on message sets.
	LeaderEpoch int32

	// Offset is the offset that a record is written as.
	//
	// For producing, this is left unset. This will be set by the client as
	// appropriate. If you are producing with no acks, this will just be
	// the offset used in the produce request and does not mirror the
	// offset actually stored within Kafka.
	Offset int64
}

Record is a record to write to Kafka.

func KeySliceRecord added in v0.7.0 

func KeySliceRecord(key, value []byte) *Record

KeySliceRecord returns a Record with the Key and Value fields set to the input key and value slices. For producing, this function is useful in tandem with the client-level ProduceTopic option.

func KeyStringRecord added in v0.7.0 

func KeyStringRecord(key, value string) *Record

KeyStringRecord returns a Record with the Key and Value fields set to the input key and value strings. For producing, this function is useful in tandem with the client-level ProduceTopic option.

This function uses the 'unsafe' package to avoid copying value into a slice.

NOTE: It is NOT SAFE to modify the record's value. This function should only be used if you only ever read record fields. This function can safely be used for producing; the client never modifies a record's key nor value fields.

func SliceRecord added in v0.7.0 

func SliceRecord(value []byte) *Record

SliceRecord returns a Record with the Value field set to the input value slice. For producing, this function is useful in tandem with the client-level ProduceTopic option.

func StringRecord added in v0.7.0 

func StringRecord(value string) *Record

StringRecord returns a Record with the Value field set to the input value string. For producing, this function is useful in tandem with the client-level ProduceTopic option.

This function uses the 'unsafe' package to avoid copying value into a slice.

NOTE: It is NOT SAFE to modify the record's value. This function should only be used if you only ever read record fields. This function can safely be used for producing; the client never modifies a record's key nor value fields.

type RecordAttrs 

type RecordAttrs struct {
	// contains filtered or unexported fields
}

RecordAttrs contains additional meta information about a record, such as its compression or timestamp type.

func (RecordAttrs) CompressionType 

func (a RecordAttrs) CompressionType() uint8

CompressionType signifies with which algorithm this record was compressed.

0 is no compression, 1 is gzip, 2 is snappy, 3 is lz4, and 4 is zstd.

func (RecordAttrs) IsControl 

func (a RecordAttrs) IsControl() bool

IsControl returns whether a record is a "control" record (ABORT or COMMIT). These are generally not visible unless explicitly opted into.

func (RecordAttrs) IsTransactional 

func (a RecordAttrs) IsTransactional() bool

IsTransactional returns whether a record is a part of a transaction.

func (RecordAttrs) TimestampType 

func (a RecordAttrs) TimestampType() int8

TimestampType specifies how Timestamp was determined.

The default, 0, means that the timestamp was determined in a client when the record was produced.

An alternative is 1, which is when the Timestamp is set in Kafka.

Records pre 0.10.0 did not have timestamps and have value -1.

type RecordHeader 

type RecordHeader struct {
	Key   string
	Value []byte
}

RecordHeader contains extra information that can be sent with Records.

type ResponseShard added in v0.6.2 

type ResponseShard struct {
	// Meta contains the broker that this request was issued to, or an
	// unknown (node ID -1) metadata if the request could not be issued.
	//
	// Requests can fail to even be issued if an appropriate broker cannot
	// be loaded of if the client cannot understand the request.
	Meta BrokerMetadata

	// Req is the request that was issued to this broker.
	Req kmsg.Request

	// Resp is the response received from the broker, if any.
	Resp kmsg.Response

	// Err, if non-nil, is the error that prevented a response from being
	// received or the request from being issued.
	Err error
}

ResponseShard ties together a request with either the response it received or an error that prevented a response from being received.

type TopicPartitioner 

type TopicPartitioner interface {
	// OnNewBatch is called when producing a record if that record would
	// trigger a new batch on its current partition.
	OnNewBatch()
	// RequiresConsistency returns true if a record must hash to the same
	// partition even if a partition is down.
	// If true, a record may hash to a partition that cannot be written to
	// and will error until the partition comes back.
	RequiresConsistency(*Record) bool
	// Partition determines, among a set of n partitions, which index should
	// be chosen to use for the partition for r.
	Partition(r *Record, n int) int
}

TopicPartitioner partitions records in an individual topic.

type TransactionEndTry 

type TransactionEndTry bool

TransactionEndTry is simply a named bool. 

const (
	// TryAbort attempts to end a transaction with an abort.
	TryAbort TransactionEndTry = false

	// TryCommit attempts to end a transaction with a commit.
	TryCommit TransactionEndTry = true
)

Source Files

View all Source files

Directories

Path Synopsis
internal
sticky
Package sticky provides sticky partitioning strategy for Kafka, with a complete overhaul to be faster, more understandable, and optimal.
 Package sticky provides sticky partitioning strategy for Kafka, with a complete overhaul to be faster, more understandable, and optimal.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.