v1

package
v1.36.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 26, 2024 License: Apache-2.0 Imports: 6 Imported by: 5

Documentation

Index

Constants

View Source 
const (
	KindExternalNetwork     = "ExternalNetwork"
	KindExternalNetworkList = "ExternalNetworkList"
)
View Source 
const (
	KindFelixConfiguration = "FelixConfiguration"

	IptablesBackendLegacy   = "Legacy"
	IptablesBackendNFTables = "NFT"
)
View Source 
const (
	KindIPPool     = "IPPool"
	KindIPPoolList = "IPPoolList"
)
View Source 
const GroupName = "crd.projectcalico.org"

GroupName is the group name use in this package

Variables

View Source 
var (
	SchemeGroupVersion = schema.GroupVersion{Group: GroupName, Version: "v1"}
	SchemeBuilder      = runtime.NewSchemeBuilder(addKnownTypes)

	AddToScheme = localSchemeBuilder.AddToScheme
)

Functions

This section is empty.

Types

type AWSSrcDstCheckOption 

type AWSSrcDstCheckOption string

+kubebuilder:validation:Enum=DoNothing;Enable;Disable 

const (
	AWSSrcDstCheckOptionDoNothing AWSSrcDstCheckOption = "DoNothing"
	AWSSrcDstCheckOptionEnable    AWSSrcDstCheckOption = "Enable"
	AWSSrcDstCheckOptionDisable   AWSSrcDstCheckOption = "Disable"
)

type BGPConfiguration added in v1.27.0 

type BGPConfiguration struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	Spec BGPConfigurationSpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`
}

func (*BGPConfiguration) DeepCopy added in v1.27.0 

func (in *BGPConfiguration) DeepCopy() *BGPConfiguration

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new BGPConfiguration.

func (*BGPConfiguration) DeepCopyInto added in v1.27.0 

func (in *BGPConfiguration) DeepCopyInto(out *BGPConfiguration)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*BGPConfiguration) DeepCopyObject added in v1.27.0 

func (in *BGPConfiguration) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type BGPConfigurationList added in v1.27.0 

type BGPConfigurationList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	Items []BGPConfiguration `json:"items" protobuf:"bytes,2,rep,name=items"`
}

BGPConfigurationList is a list of BGPConfiguration resources.

func (*BGPConfigurationList) DeepCopy added in v1.27.0 

func (in *BGPConfigurationList) DeepCopy() *BGPConfigurationList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new BGPConfigurationList.

func (*BGPConfigurationList) DeepCopyInto added in v1.27.0 

func (in *BGPConfigurationList) DeepCopyInto(out *BGPConfigurationList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*BGPConfigurationList) DeepCopyObject added in v1.27.0 

func (in *BGPConfigurationList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type BGPConfigurationSpec added in v1.27.0 

type BGPConfigurationSpec struct {
	// LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: INFO]
	LogSeverityScreen string `json:"logSeverityScreen,omitempty" validate:"omitempty,logLevel" confignamev1:"loglevel"`

	// NodeToNodeMeshEnabled sets whether full node to node BGP mesh is enabled. [Default: true]
	NodeToNodeMeshEnabled *bool `json:"nodeToNodeMeshEnabled,omitempty" validate:"omitempty" confignamev1:"node_mesh"`

	// ASNumber is the default AS number used by a node. [Default: 64512]
	ASNumber *numorstring.ASNumber `json:"asNumber,omitempty" validate:"omitempty" confignamev1:"as_num"`

	// ServiceLoadBalancerIPs are the CIDR blocks for Kubernetes Service LoadBalancer IPs.
	// Kubernetes Service status.LoadBalancer.Ingress IPs will only be advertised if they are within one of these blocks.
	ServiceLoadBalancerIPs []ServiceLoadBalancerIPBlock `json:"serviceLoadBalancerIPs,omitempty" validate:"omitempty,dive" confignamev1:"svc_loadbalancer_ips"`

	// ServiceExternalIPs are the CIDR blocks for Kubernetes Service External IPs.
	// Kubernetes Service ExternalIPs will only be advertised if they are within one of these blocks.
	ServiceExternalIPs []ServiceExternalIPBlock `json:"serviceExternalIPs,omitempty" validate:"omitempty,dive" confignamev1:"svc_external_ips"`

	// ServiceClusterIPs are the CIDR blocks from which service cluster IPs are allocated.
	// If specified, Calico will advertise these blocks, as well as any cluster IPs within them.
	ServiceClusterIPs []ServiceClusterIPBlock `json:"serviceClusterIPs,omitempty" validate:"omitempty,dive" confignamev1:"svc_cluster_ips"`

	// Communities is a list of BGP community values and their arbitrary names for tagging routes.
	Communities []Community `json:"communities,omitempty" validate:"omitempty,dive" confignamev1:"communities"`

	// PrefixAdvertisements contains per-prefix advertisement configuration.
	PrefixAdvertisements []PrefixAdvertisement `json:"prefixAdvertisements,omitempty" validate:"omitempty,dive" confignamev1:"prefix_advertisements"`

	// ListenPort is the port where BGP protocol should listen. Defaults to 179
	// +kubebuilder:validation:Minimum:=1
	// +kubebuilder:validation:Maximum:=65535
	ListenPort uint16 `json:"listenPort,omitempty" validate:"omitempty,gt=0" confignamev1:"listen_port"`

	// Optional BGP password for full node-to-mesh peerings.
	// This field can only be set on the default BGPConfiguration instance and requires that NodeMesh is enabled
	// +optional
	NodeMeshPassword *BGPPassword `json:"nodeMeshPassword,omitempty" validate:"omitempty" confignamev1:"node_mesh_password"`

	// Time to allow for software restart for node-to-mesh peerings.  When specified, this is configured
	// as the graceful restart timeout.  When not specified, the BIRD default of 120s is used.
	// This field can only be set on the default BGPConfiguration instance and requires that NodeMesh is enabled
	// +optional
	NodeMeshMaxRestartTime *metav1.Duration `json:"nodeMeshMaxRestartTime,omitempty" confignamev1:"node_mesh_restart_time"`

	// BindMode indicates whether to listen for BGP connections on all addresses (None)
	// or only on the node's canonical IP address Node.Spec.BGP.IPvXAddress (NodeIP).
	BindMode string `json:"bindMode,omitempty" validate:"omitempty,oneof=None NodeIP"`
}

BGPConfigurationSpec contains the values of the BGP configuration.

func (*BGPConfigurationSpec) DeepCopy added in v1.27.0 

func (in *BGPConfigurationSpec) DeepCopy() *BGPConfigurationSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new BGPConfigurationSpec.

func (*BGPConfigurationSpec) DeepCopyInto added in v1.27.0 

func (in *BGPConfigurationSpec) DeepCopyInto(out *BGPConfigurationSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type BGPPassword added in v1.27.0 

type BGPPassword struct {
	// Selects a key of a secret in the node pod's namespace.
	SecretKeyRef *k8sv1.SecretKeySelector `json:"secretKeyRef,omitempty"`
}

BGPPassword contains ways to specify a BGP password.

func (*BGPPassword) DeepCopy added in v1.27.0 

func (in *BGPPassword) DeepCopy() *BGPPassword

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new BGPPassword.

func (*BGPPassword) DeepCopyInto added in v1.27.0 

func (in *BGPPassword) DeepCopyInto(out *BGPPassword)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type Community added in v1.27.0 

type Community struct {
	// Name given to community value.
	Name string `json:"name,omitempty" validate:"required,name"`
	// Value must be of format `aa:nn` or `aa:nn:mm`.
	// For standard community use `aa:nn` format, where `aa` and `nn` are 16 bit number.
	// For large community use `aa:nn:mm` format, where `aa`, `nn` and `mm` are 32 bit number.
	// Where, `aa` is an AS Number, `nn` and `mm` are per-AS identifier.
	// +kubebuilder:validation:Pattern=`^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$`
	Value string `json:"value,omitempty" validate:"required"`
}

Community contains standard or large community value and its name.

func (*Community) DeepCopy added in v1.27.0 

func (in *Community) DeepCopy() *Community

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new Community.

func (*Community) DeepCopyInto added in v1.27.0 

func (in *Community) DeepCopyInto(out *Community)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ExternalNetwork added in v1.29.1 

type ExternalNetwork struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	Spec ExternalNetworkSpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`
}

func (*ExternalNetwork) DeepCopy added in v1.29.1 

func (in *ExternalNetwork) DeepCopy() *ExternalNetwork

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ExternalNetwork.

func (*ExternalNetwork) DeepCopyInto added in v1.29.1 

func (in *ExternalNetwork) DeepCopyInto(out *ExternalNetwork)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*ExternalNetwork) DeepCopyObject added in v1.29.1 

func (in *ExternalNetwork) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type ExternalNetworkList added in v1.29.1 

type ExternalNetworkList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	Items []ExternalNetwork `json:"items" protobuf:"bytes,2,rep,name=items"`
}

ExternalNetworkList is a list of ExternalNetwork resources.

func (*ExternalNetworkList) DeepCopy added in v1.29.1 

func (in *ExternalNetworkList) DeepCopy() *ExternalNetworkList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ExternalNetworkList.

func (*ExternalNetworkList) DeepCopyInto added in v1.29.1 

func (in *ExternalNetworkList) DeepCopyInto(out *ExternalNetworkList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*ExternalNetworkList) DeepCopyObject added in v1.29.1 

func (in *ExternalNetworkList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type ExternalNetworkSpec added in v1.29.1 

type ExternalNetworkSpec struct {
	// The index of a linux kernel routing table that should be used for the routes associated with the external network.
	// The value should be unique for each external network.
	// The value should not be in the range of `RouteTableRanges` field in FelixConfiguration.
	// The kernel routing table index should not be used by other processes on the node.
	RouteTableIndex *uint32 `json:"routeTableIndex" validate:"required"`
}

ExternalNetworkSpec contains the specification for a external network resource.

func (*ExternalNetworkSpec) DeepCopy added in v1.29.1 

func (in *ExternalNetworkSpec) DeepCopy() *ExternalNetworkSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ExternalNetworkSpec.

func (*ExternalNetworkSpec) DeepCopyInto added in v1.29.1 

func (in *ExternalNetworkSpec) DeepCopyInto(out *ExternalNetworkSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type FelixConfiguration 

type FelixConfiguration struct {
	metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	metav1.ObjectMeta `json:"metadata,omitempty"`
	// Specification of the FelixConfiguration.
	Spec FelixConfigurationSpec `json:"spec,omitempty"`
}

Felix Configuration contains the configuration for Felix.

func (*FelixConfiguration) DeepCopy 

func (in *FelixConfiguration) DeepCopy() *FelixConfiguration

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new FelixConfiguration.

func (*FelixConfiguration) DeepCopyInto 

func (in *FelixConfiguration) DeepCopyInto(out *FelixConfiguration)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*FelixConfiguration) DeepCopyObject 

func (in *FelixConfiguration) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type FelixConfigurationList added in v1.14.2 

type FelixConfigurationList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata"`
	Items           []FelixConfiguration `json:"items"`
}

FelixConfigurationList contains a list of FelixConfigurationList resources.

func (*FelixConfigurationList) DeepCopy added in v1.14.2 

func (in *FelixConfigurationList) DeepCopy() *FelixConfigurationList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new FelixConfigurationList.

func (*FelixConfigurationList) DeepCopyInto added in v1.14.2 

func (in *FelixConfigurationList) DeepCopyInto(out *FelixConfigurationList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*FelixConfigurationList) DeepCopyObject added in v1.14.2 

func (in *FelixConfigurationList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type FelixConfigurationSpec 

type FelixConfigurationSpec struct {
	UseInternalDataplaneDriver *bool  `json:"useInternalDataplaneDriver,omitempty"`
	DataplaneDriver            string `json:"dataplaneDriver,omitempty"`

	IPv6Support *bool `json:"ipv6Support,omitempty" confignamev1:"Ipv6Support"`

	// RouterefreshInterval is the period at which Felix re-checks the routes
	// in the dataplane to ensure that no other process has accidentally broken Calico’s rules.
	// Set to 0 to disable route refresh. [Default: 90s]
	RouteRefreshInterval *metav1.Duration `json:"routeRefreshInterval,omitempty" configv1timescale:"seconds"`
	// InterfaceRefreshInterval is the period at which Felix rescans local interfaces to verify their state.
	// The rescan can be disabled by setting the interval to 0.
	InterfaceRefreshInterval *metav1.Duration `json:"interfaceRefreshInterval,omitempty" configv1timescale:"seconds"`
	// IptablesRefreshInterval is the period at which Felix re-checks the IP sets
	// in the dataplane to ensure that no other process has accidentally broken Calico’s rules.
	// Set to 0 to disable IP sets refresh. Note: the default for this value is lower than the
	// other refresh intervals as a workaround for a Linux kernel bug that was fixed in kernel
	// version 4.11. If you are using v4.11 or greater you may want to set this to, a higher value
	// to reduce Felix CPU usage. [Default: 10s]
	IptablesRefreshInterval *metav1.Duration `json:"iptablesRefreshInterval,omitempty" configv1timescale:"seconds"`
	// IptablesPostWriteCheckInterval is the period after Felix has done a write
	// to the dataplane that it schedules an extra read back in order to check the write was not
	// clobbered by another process. This should only occur if another application on the system
	// doesn’t respect the iptables lock. [Default: 1s]
	IptablesPostWriteCheckInterval *metav1.Duration `json:"iptablesPostWriteCheckInterval,omitempty" configv1timescale:"seconds" confignamev1:"IptablesPostWriteCheckIntervalSecs"`
	// IptablesLockFilePath is the location of the iptables lock file. You may need to change this
	// if the lock file is not in its standard location (for example if you have mapped it into Felix’s
	// container at a different path). [Default: /run/xtables.lock]
	IptablesLockFilePath string `json:"iptablesLockFilePath,omitempty"`
	// IptablesLockTimeout is the time that Felix will wait for the iptables lock,
	// or 0, to disable. To use this feature, Felix must share the iptables lock file with all other
	// processes that also take the lock. When running Felix inside a container, this requires the
	// /run directory of the host to be mounted into the calico/node or calico/felix container.
	// [Default: 0s disabled]
	IptablesLockTimeout *metav1.Duration `json:"iptablesLockTimeout,omitempty" configv1timescale:"seconds" confignamev1:"IptablesLockTimeoutSecs"`
	// IptablesLockProbeInterval is the time that Felix will wait between
	// attempts to acquire the iptables lock if it is not available. Lower values make Felix more
	// responsive when the lock is contended, but use more CPU. [Default: 50ms]
	IptablesLockProbeInterval *metav1.Duration `json:"iptablesLockProbeInterval,omitempty" configv1timescale:"milliseconds" confignamev1:"IptablesLockProbeIntervalMillis"`
	// FeatureDetectOverride is used to override the feature detection.
	// Values are specified in a comma separated list with no spaces, example;
	// "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=".
	// "true" or "false" will force the feature, empty or omitted values are
	// auto-detected.
	FeatureDetectOverride string `json:"featureDetectOverride,omitempty" validate:"omitempty,keyValueList"`
	// IpsetsRefreshInterval is the period at which Felix re-checks all iptables
	// state to ensure that no other process has accidentally broken Calico’s rules. Set to 0 to
	// disable iptables refresh. [Default: 90s]
	IpsetsRefreshInterval *metav1.Duration `json:"ipsetsRefreshInterval,omitempty" configv1timescale:"seconds"`
	MaxIpsetSize          *int             `json:"maxIpsetSize,omitempty"`
	// IptablesBackend specifies which backend of iptables will be used. The default is legacy.
	IptablesBackend *IptablesBackend `json:"iptablesBackend,omitempty" validate:"omitempty,iptablesBackend"`

	// XDPRefreshInterval is the period at which Felix re-checks all XDP state to ensure that no
	// other process has accidentally broken Calico's BPF maps or attached programs. Set to 0 to
	// disable XDP refresh. [Default: 90s]
	XDPRefreshInterval *metav1.Duration `json:"xdpRefreshInterval,omitempty" configv1timescale:"seconds"`

	NetlinkTimeout *metav1.Duration `json:"netlinkTimeout,omitempty" configv1timescale:"seconds" confignamev1:"NetlinkTimeoutSecs"`

	// MetadataAddr is the IP address or domain name of the server that can answer VM queries for
	// cloud-init metadata. In OpenStack, this corresponds to the machine running nova-api (or in
	// Ubuntu, nova-api-metadata). A value of none (case insensitive) means that Felix should not
	// set up any NAT rule for the metadata path. [Default: 127.0.0.1]
	MetadataAddr string `json:"metadataAddr,omitempty"`
	// MetadataPort is the port of the metadata server. This, combined with global.MetadataAddr (if
	// not ‘None’), is used to set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort.
	// In most cases this should not need to be changed [Default: 8775].
	MetadataPort *int `json:"metadataPort,omitempty"`

	// OpenstackRegion is the name of the region that a particular Felix belongs to. In a multi-region
	// Calico/OpenStack deployment, this must be configured somehow for each Felix (here in the datamodel,
	// or in felix.cfg or the environment on each compute node), and must match the [calico]
	// openstack_region value configured in neutron.conf on each node. [Default: Empty]
	OpenstackRegion string `json:"openstackRegion,omitempty"`

	// InterfacePrefix is the interface name prefix that identifies workload endpoints and so distinguishes
	// them from host endpoint interfaces. Note: in environments other than bare metal, the orchestrators
	// configure this appropriately. For example our Kubernetes and Docker integrations set the ‘cali’ value,
	// and our OpenStack integration sets the ‘tap’ value. [Default: cali]
	InterfacePrefix string `json:"interfacePrefix,omitempty"`
	// InterfaceExclude is a comma-separated list of interfaces that Felix should exclude when monitoring for host
	// endpoints. The default value ensures that Felix ignores Kubernetes' IPVS dummy interface, which is used
	// internally by kube-proxy. If you want to exclude multiple interface names using a single value, the list
	// supports regular expressions. For regular expressions you must wrap the value with '/'. For example
	// having values '/^kube/,veth1' will exclude all interfaces that begin with 'kube' and also the interface
	// 'veth1'. [Default: kube-ipvs0]
	InterfaceExclude string `json:"interfaceExclude,omitempty"`

	// ChainInsertMode controls whether Felix hooks the kernel’s top-level iptables chains by inserting a rule
	// at the top of the chain or by appending a rule at the bottom. insert is the safe default since it prevents
	// Calico’s rules from being bypassed. If you switch to append mode, be sure that the other rules in the chains
	// signal acceptance by falling through to the Calico rules, otherwise the Calico policy will be bypassed.
	// [Default: insert]
	ChainInsertMode string `json:"chainInsertMode,omitempty"`
	// DefaultEndpointToHostAction controls what happens to traffic that goes from a workload endpoint to the host
	// itself (after the traffic hits the endpoint egress policy). By default Calico blocks traffic from workload
	// endpoints to the host itself with an iptables “DROP” action. If you want to allow some or all traffic from
	// endpoint to host, set this parameter to RETURN or ACCEPT. Use RETURN if you have your own rules in the iptables
	// “INPUT” chain; Calico will insert its rules at the top of that chain, then “RETURN” packets to the “INPUT” chain
	// once it has completed processing workload endpoint egress policy. Use ACCEPT to unconditionally accept packets
	// from workloads after processing workload endpoint egress policy. [Default: Drop]
	DefaultEndpointToHostAction string `json:"defaultEndpointToHostAction,omitempty" validate:"omitempty,dropAcceptReturn"`
	IptablesFilterAllowAction   string `json:"iptablesFilterAllowAction,omitempty" validate:"omitempty,acceptReturn"`
	IptablesMangleAllowAction   string `json:"iptablesMangleAllowAction,omitempty" validate:"omitempty,acceptReturn"`
	// LogPrefix is the log prefix that Felix uses when rendering LOG rules. [Default: calico-packet]
	LogPrefix string `json:"logPrefix,omitempty"`

	// LogFilePath is the full path to the Felix log. Set to none to disable file logging. [Default: /var/log/calico/felix.log]
	LogFilePath string `json:"logFilePath,omitempty"`

	// LogSeverityFile is the log severity above which logs are sent to the log file. [Default: Info]
	LogSeverityFile string `json:"logSeverityFile,omitempty" validate:"omitempty,logLevel"`
	// LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: Info]
	LogSeverityScreen string `json:"logSeverityScreen,omitempty" validate:"omitempty,logLevel"`
	// LogSeveritySys is the log severity above which logs are sent to the syslog. Set to None for no logging to syslog.
	// [Default: Info]
	LogSeveritySys string `json:"logSeveritySys,omitempty" validate:"omitempty,logLevel"`

	IPIPEnabled *bool `json:"ipipEnabled,omitempty" confignamev1:"IpInIpEnabled"`
	// IPIPMTU is the MTU to set on the tunnel device. See Configuring MTU [Default: 1440]
	IPIPMTU *int `json:"ipipMTU,omitempty" confignamev1:"IpInIpMtu"`

	VXLANEnabled *bool `json:"vxlanEnabled,omitempty"`
	// VXLANMTU is the MTU to set on the tunnel device. See Configuring MTU [Default: 1440]
	VXLANMTU  *int `json:"vxlanMTU,omitempty"`
	VXLANPort *int `json:"vxlanPort,omitempty"`
	VXLANVNI  *int `json:"vxlanVNI,omitempty"`

	// ReportingInterval is the interval at which Felix reports its status into the datastore or 0 to disable.
	// Must be non-zero in OpenStack deployments. [Default: 30s]
	ReportingInterval *metav1.Duration `json:"reportingInterval,omitempty" configv1timescale:"seconds" confignamev1:"ReportingIntervalSecs"`
	// ReportingTTL is the time-to-live setting for process-wide status reports. [Default: 90s]
	ReportingTTL *metav1.Duration `json:"reportingTTL,omitempty" configv1timescale:"seconds" confignamev1:"ReportingTTLSecs"`

	EndpointReportingEnabled *bool            `json:"endpointReportingEnabled,omitempty"`
	EndpointReportingDelay   *metav1.Duration `json:"endpointReportingDelay,omitempty" configv1timescale:"seconds" confignamev1:"EndpointReportingDelaySecs"`

	// EndpointStatusPathPrefix is the path to the directory
	// where endpoint status will be written. Endpoint status
	// file reporting is disabled if field is left empty.
	//
	// Chosen directory should match the directory used by the CNI for PodStartupDelay.
	// [Default: empty]
	EndpointStatusPathPrefix *string `json:"endpointStatusPathPrefix,omitempty"`

	// IptablesMarkMask is the mask that Felix selects its IPTables Mark bits from. Should be a 32 bit hexadecimal
	// number with at least 8 bits set, none of which clash with any other mark bits in use on the system.
	// [Default: 0xff000000]
	IptablesMarkMask *uint32 `json:"iptablesMarkMask,omitempty"`

	DisableConntrackInvalidCheck *bool `json:"disableConntrackInvalidCheck,omitempty"`

	HealthEnabled *bool   `json:"healthEnabled,omitempty"`
	HealthHost    *string `json:"healthHost,omitempty"`
	HealthPort    *int    `json:"healthPort,omitempty"`

	// PrometheusMetricsEnabled enables the Prometheus metrics server in Felix if set to true. [Default: false]
	PrometheusMetricsEnabled *bool `json:"prometheusMetricsEnabled,omitempty"`
	// PrometheusMetricsHost is the host that the Prometheus metrics server should bind to. [Default: empty]
	PrometheusMetricsHost string `json:"prometheusMetricsHost,omitempty" validate:"omitempty,prometheusHost"`
	// PrometheusMetricsPort is the TCP port that the Prometheus metrics server should bind to. [Default: 9091]
	PrometheusMetricsPort *int `json:"prometheusMetricsPort,omitempty"`
	// PrometheusGoMetricsEnabled disables Go runtime metrics collection, which the Prometheus client does by default, when
	// set to false. This reduces the number of metrics reported, reducing Prometheus load. [Default: true]
	PrometheusGoMetricsEnabled *bool `json:"prometheusGoMetricsEnabled,omitempty"`
	// PrometheusProcessMetricsEnabled disables process metrics collection, which the Prometheus client does by default, when
	// set to false. This reduces the number of metrics reported, reducing Prometheus load. [Default: true]
	PrometheusProcessMetricsEnabled *bool `json:"prometheusProcessMetricsEnabled,omitempty"`
	// PrometheusReporterPort specifies the TCP port on which to report denied packet metrics.
	PrometheusReporterPort *int `json:"prometheusReporterPort,omitempty"`

	// FailsafeInboundHostPorts is a comma-delimited list of UDP/TCP ports and CIDRs that Felix will allow incoming traffic to host endpoints
	// on irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. Each
	// port should be specified as tcp:<cidr>:<port-number> or udp:<cidr>:<port-number>. For back-compatibility, if the protocol is not specified, it
	// defaults to "tcp". If a CIDR is not specified, it will default to `0.0.0.0/0`. To disable all inbound host ports, use the value none.
	// The default value allows ssh access and DHCP.
	// [Default: tcp:0.0.0.0/0:22, udp:0.0.0.0/0:68, tcp:0.0.0.0/0:179, tcp:0.0.0.0/0:2379, tcp:0.0.0.0/0:2380, tcp:0.0.0.0/0:6443, tcp:0.0.0.0/0:6666, tcp:0.0.0.0/0:6667]
	FailsafeInboundHostPorts *[]ProtoPort `json:"failsafeInboundHostPorts,omitempty"`
	// FailsafeOutboundHostPorts is a comma-delimited list of UDP/TCP ports and CIDRs that Felix will allow outgoing traffic from host endpoints to
	// irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. Each port
	// should be specified as tcp:<cidr>:<port-number> or udp:<cidr>:<port-number>. For back-compatibility, if the protocol is not specified, it defaults
	// to "tcp". If a CIDR is not specified, it will default to `0.0.0.0/0`. To disable all outbound host ports, use the value none.
	// The default value opens etcd's standard ports to ensure that Felix does not get cut off from etcd as well as allowing DHCP and DNS.
	// [Default: tcp:0.0.0.0/0:179, tcp:0.0.0.0/0:2379, tcp:0.0.0.0/0:2380, tcp:0.0.0.0/0:6443, tcp:0.0.0.0/0:6666, tcp:0.0.0.0/0:6667, udp:0.0.0.0/0:53, udp:0.0.0.0/0:67]
	FailsafeOutboundHostPorts *[]ProtoPort `json:"failsafeOutboundHostPorts,omitempty"`

	// KubeNodePortRanges holds list of port ranges used for service node ports. Only used if felix detects kube-proxy running in ipvs mode.
	// Felix uses these ranges to separate host and workload traffic. [Default: 30000:32767].
	KubeNodePortRanges *[]numorstring.Port `json:"kubeNodePortRanges,omitempty" validate:"omitempty,dive"`

	// PolicySyncPathPrefix is used to by Felix to communicate policy changes to external services,
	// like Application layer policy. [Default: Empty]
	PolicySyncPathPrefix string `json:"policySyncPathPrefix,omitempty"`

	// UsageReportingEnabled reports anonymous Calico version number and cluster size to projectcalico.org. Logs warnings returned by the usage
	// server. For example, if a significant security vulnerability has been discovered in the version of Calico being used. [Default: true]
	UsageReportingEnabled *bool `json:"usageReportingEnabled,omitempty"`
	// UsageReportingInitialDelay controls the minimum delay before Felix makes a report. [Default: 300s]
	UsageReportingInitialDelay *metav1.Duration `json:"usageReportingInitialDelay,omitempty" configv1timescale:"seconds" confignamev1:"UsageReportingInitialDelaySecs"`
	// UsageReportingInterval controls the interval at which Felix makes reports. [Default: 86400s]
	UsageReportingInterval *metav1.Duration `json:"usageReportingInterval,omitempty" configv1timescale:"seconds" confignamev1:"UsageReportingIntervalSecs"`

	// NATPortRange specifies the range of ports that is used for port mapping when doing outgoing NAT. When unset the default behavior of the
	// network stack is used.
	NATPortRange *numorstring.Port `json:"natPortRange,omitempty"`

	// NATOutgoingAddress specifies an address to use when performing source NAT for traffic in a natOutgoing pool that
	// is leaving the network. By default the address used is an address on the interface the traffic is leaving on
	// (ie it uses the iptables MASQUERADE target)
	NATOutgoingAddress string `json:"natOutgoingAddress,omitempty"`

	// This is the source address to use on programmed device routes. By default the source address is left blank,
	// leaving the kernel to choose the source address used.
	DeviceRouteSourceAddress string `json:"deviceRouteSourceAddress,omitempty"`

	// This defines the route protocol added to programmed device routes, by default this will be RTPROT_BOOT
	// when left blank.
	DeviceRouteProtocol *int `json:"deviceRouteProtocol,omitempty"`
	// Whether or not to remove device routes that have not been programmed by Felix. Disabling this will allow external
	// applications to also add device routes. This is enabled by default which means we will remove externally added routes.
	RemoveExternalRoutes *bool `json:"removeExternalRoutes,omitempty"`

	// ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes which may source tunnel traffic and have
	// the tunneled traffic be accepted at calico nodes.
	ExternalNodesCIDRList *[]string `json:"externalNodesList,omitempty"`

	DebugMemoryProfilePath          string           `json:"debugMemoryProfilePath,omitempty"`
	DebugDisableLogDropping         *bool            `json:"debugDisableLogDropping,omitempty"`
	DebugSimulateCalcGraphHangAfter *metav1.Duration `json:"debugSimulateCalcGraphHangAfter,omitempty" configv1timescale:"seconds"`
	DebugSimulateDataplaneHangAfter *metav1.Duration `json:"debugSimulateDataplaneHangAfter,omitempty" configv1timescale:"seconds"`

	IptablesNATOutgoingInterfaceFilter string `json:"iptablesNATOutgoingInterfaceFilter,omitempty" validate:"omitempty,ifaceFilter"`

	// SidecarAccelerationEnabled enables experimental sidecar acceleration [Default: false]
	SidecarAccelerationEnabled *bool `json:"sidecarAccelerationEnabled,omitempty"`

	// XDPEnabled enables XDP acceleration for suitable untracked incoming deny rules. [Default: true]
	XDPEnabled *bool `json:"xdpEnabled,omitempty" confignamev1:"XDPEnabled"`

	// GenericXDPEnabled enables Generic XDP so network cards that don't support XDP offload or driver
	// modes can use XDP. This is not recommended since it doesn't provide better performance than
	// iptables. [Default: false]
	GenericXDPEnabled *bool `json:"genericXDPEnabled,omitempty" confignamev1:"GenericXDPEnabled"`

	// NFTablesMode configures nftables support in Felix. [Default: Disabled]
	NFTablesMode *NFTablesMode `json:"nftablesMode,omitempty"`

	// BPFEnabled, if enabled Felix will use the BPF dataplane. [Default: false]
	BPFEnabled *bool `json:"bpfEnabled,omitempty" validate:"omitempty"`
	// BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled sysctl to disable
	// unprivileged use of BPF.  This ensures that unprivileged users cannot access Calico's BPF maps and
	// cannot insert their own BPF programs to interfere with Calico's. [Default: true]
	BPFDisableUnprivileged *bool `json:"bpfDisableUnprivileged,omitempty" validate:"omitempty"`
	// BPFLogLevel controls the log level of the BPF programs when in BPF dataplane mode.  One of "Off", "Info", or
	// "Debug".  The logs are emitted to the BPF trace pipe, accessible with the command `tc exec bpf debug`.
	// [Default: Off].
	// +optional
	BPFLogLevel string `json:"bpfLogLevel" validate:"omitempty,bpfLogLevel"`
	// BPFDataIfacePattern is a regular expression that controls which interfaces Felix should attach BPF programs to
	// in order to catch traffic to/from the network.  This needs to match the interfaces that Calico workload traffic
	// flows over as well as any interfaces that handle incoming traffic to nodeports and services from outside the
	// cluster.  It should not match the workload interfaces (usually named cali...).
	// [Default: ^(en.*|eth.*|tunl0$)]
	BPFDataIfacePattern string `json:"bpfDataIfacePattern,omitempty" validate:"omitempty,regexp"`
	// BPFConnectTimeLoadBalancingEnabled when in BPF mode, controls whether Felix installs the connection-time load
	// balancer.  The connect-time load balancer is required for the host to be able to reach Kubernetes services
	// and it improves the performance of pod-to-service connections.  The only reason to disable it is for debugging
	// purposes.  [Default: true]
	BPFConnectTimeLoadBalancingEnabled *bool `json:"bpfConnectTimeLoadBalancingEnabled,omitempty" validate:"omitempty"`
	// BPFExternalServiceMode in BPF mode, controls how connections from outside the cluster to services (node ports
	// and cluster IPs) are forwarded to remote workloads.  If set to "Tunnel" then both request and response traffic
	// is tunneled to the remote node.  If set to "DSR", the request traffic is tunneled but the response traffic
	// is sent directly from the remote node.  In "DSR" mode, the remote node appears to use the IP of the ingress
	// node; this requires a permissive L2 network.  [Default: Tunnel]
	BPFExternalServiceMode string `json:"bpfExternalServiceMode,omitempty" validate:"omitempty,bpfServiceMode"`
	// BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF mode, Felix will proactively clean up the upstream
	// Kubernetes kube-proxy's iptables chains.  Should only be enabled if kube-proxy is not running.  [Default: true]
	BPFKubeProxyIptablesCleanupEnabled *bool `json:"bpfKubeProxyIptablesCleanupEnabled,omitempty" validate:"omitempty"`
	// BPFKubeProxyMinSyncPeriod, in BPF mode, controls the minimum time between updates to the dataplane for Felix's
	// embedded kube-proxy.  Lower values give reduced set-up latency.  Higher values reduce Felix CPU usage by
	// batching up more work.  [Default: 1s]
	BPFKubeProxyMinSyncPeriod *metav1.Duration `json:"bpfKubeProxyMinSyncPeriod,omitempty" validate:"omitempty" configv1timescale:"seconds"`
	// BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls whether Felix's
	// embedded kube-proxy accepts EndpointSlices or not.
	BPFKubeProxyEndpointSlicesEnabled *bool `json:"bpfKubeProxyEndpointSlicesEnabled,omitempty" validate:"omitempty"`
	// BPFHostConntrackBypass Controls whether to bypass Linux conntrack in BPF mode for
	// workloads and services. [Default: true - bypass Linux conntrack]
	BPFHostConntrackBypass *bool `json:"bpfHostConntrackBypass,omitempty"`

	// RouteSource configures where Felix gets its routing information.
	// - WorkloadIPs: use workload endpoints to construct routes.
	// - CalicoIPAM: the default - use IPAM data to construct routes.
	RouteSource string `json:"routeSource,omitempty" validate:"omitempty,routeSource"`

	// Calico programs additional Linux route tables for various purposes.  RouteTableRange
	// specifies the indices of the route tables that Calico should use.
	RouteTableRange *RouteTableRange `json:"routeTableRange,omitempty" validate:"omitempty"`

	// WireguardEnabled controls whether Wireguard is enabled for IPv4 (encapsulating IPv4 traffic over an IPv4 underlay network). [Default: false]
	WireguardEnabled *bool `json:"wireguardEnabled,omitempty"`
	// WireguardEnabledV6 controls whether Wireguard is enabled for IPv6 (encapsulating IPv6 traffic over an IPv6 underlay network). [Default: false]
	WireguardEnabledV6 *bool `json:"wireguardEnabledV6,omitempty"`
	// WireguardListeningPort controls the listening port used by IPv4 Wireguard. [Default: 51820]
	WireguardListeningPort *int `json:"wireguardListeningPort,omitempty" validate:"omitempty,gt=0,lte=65535"`
	// WireguardListeningPortV6 controls the listening port used by IPv6 Wireguard. [Default: 51821]
	WireguardListeningPortV6 *int `json:"wireguardListeningPortV6,omitempty" validate:"omitempty,gt=0,lte=65535"`
	// WireguardRoutingRulePriority controls the priority value to use for the Wireguard routing rule. [Default: 99]
	WireguardRoutingRulePriority *int `json:"wireguardRoutingRulePriority,omitempty" validate:"omitempty,gt=0,lt=32766"`
	// WireguardInterfaceName specifies the name to use for the IPv4 Wireguard interface. [Default: wireguard.cali]
	WireguardInterfaceName string `json:"wireguardInterfaceName,omitempty" validate:"omitempty,interface"`
	// WireguardInterfaceNameV6 specifies the name to use for the IPv6 Wireguard interface. [Default: wg-v6.cali]
	WireguardInterfaceNameV6 string `json:"wireguardInterfaceNameV6,omitempty" validate:"omitempty,interface"`
	// WireguardMTU controls the MTU on the IPv4 Wireguard interface. See Configuring MTU [Default: 1440]
	WireguardMTU *int `json:"wireguardMTU,omitempty"`
	// WireguardMTUV6 controls the MTU on the IPv6 Wireguard interface. See Configuring MTU [Default: 1420]
	WireguardMTUV6 *int `json:"wireguardMTUV6,omitempty"`
	// WireguardHostEncryptionEnabled controls whether Wireguard host-to-host encryption is enabled. [Default: false]
	WireguardHostEncryptionEnabled *bool `json:"wireguardHostEncryptionEnabled,omitempty"`
	// WireguardKeepAlive controls Wireguard PersistentKeepalive option. Set 0 to disable. [Default: 0]
	WireguardPersistentKeepAlive *metav1.Duration `json:"wireguardKeepAlive,omitempty"`

	// Set source-destination-check on AWS EC2 instances. Accepted value must be one of "DoNothing", "Enabled" or "Disabled".
	// [Default: DoNothing]
	AWSSrcDstCheck *AWSSrcDstCheckOption `json:"awsSrcDstCheck,omitempty" validate:"omitempty,oneof=DoNothing Enable Disable"`

	// TPROXYMode sets whether traffic is directed through a transparent proxy for further processing or not
	// [Default: Disabled]
	TPROXYMode *TPROXYModeOption `json:"tproxyMode,omitempty"`

	// EgressIPVXLANPort is the port number of vxlan tunnel device for egress traffic. [Default: 4790]
	EgressIPVXLANPort *int `json:"egressIPVXLANPort,omitempty"`
	// EgressIPVXLANVNI is the VNI ID of vxlan tunnel device for egress traffic. [Default: 4097]
	EgressIPVXLANVNI *int `json:"egressIPVXLANVNI,omitempty"`

	// The DNS servers that Felix should trust. Each entry here must be `<ip>[:<port>]` - indicating an
	// explicit DNS server IP - or `k8s-service:[<namespace>/]<name>[:port]` - indicating a Kubernetes DNS
	// service. `<port>` defaults to the first service port, or 53 for an IP, and `<namespace>` to
	// `kube-system`. An IPv6 address with a port must use the square brackets convention, for example
	// `[fd00:83a6::12]:5353`.Note that Felix (calico-node) will need RBAC permission to read the details of
	// each service specified by a `k8s-service:...` form. [Default: "k8s-service:kube-dns"].
	DNSTrustedServers *[]string `json:"dnsTrustedServers,omitempty"`
}

FelixConfigurationSpec contains the values of the Felix configuration.

func (*FelixConfigurationSpec) DeepCopy 

func (in *FelixConfigurationSpec) DeepCopy() *FelixConfigurationSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new FelixConfigurationSpec.

func (*FelixConfigurationSpec) DeepCopyInto 

func (in *FelixConfigurationSpec) DeepCopyInto(out *FelixConfigurationSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type IPIPMode 

type IPIPMode string
const (
	IPIPModeNever       IPIPMode = "Never"
	IPIPModeAlways      IPIPMode = "Always"
	IPIPModeCrossSubnet IPIPMode = "CrossSubnet"
)

type IPPool 

type IPPool struct {
	metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	metav1.ObjectMeta `json:"metadata,omitempty"`
	// Specification of the IPPool.
	Spec IPPoolSpec `json:"spec,omitempty"`
}

IPPool contains information about an IPPool resource.

func NewIPPool 

func NewIPPool() *IPPool

NewIPPool creates a new (zeroed) IPPool struct with the TypeMetadata initialised to the current version.

func (*IPPool) DeepCopy 

func (in *IPPool) DeepCopy() *IPPool

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new IPPool.

func (*IPPool) DeepCopyInto 

func (in *IPPool) DeepCopyInto(out *IPPool)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*IPPool) DeepCopyObject 

func (in *IPPool) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type IPPoolAllowedUse added in v1.34.0 

type IPPoolAllowedUse string
const (
	IPPoolAllowedUseWorkload IPPoolAllowedUse = "Workload"
	IPPoolAllowedUseTunnel   IPPoolAllowedUse = "Tunnel"
)

type IPPoolList 

type IPPoolList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata"`
	Items           []IPPool `json:"items"`
}

IPPoolList contains a list of IPPool resources.

func NewIPPoolList 

func NewIPPoolList() *IPPoolList

NewIPPoolList creates a new (zeroed) IPPoolList struct with the TypeMetadata initialised to the current version.

func (*IPPoolList) DeepCopy 

func (in *IPPoolList) DeepCopy() *IPPoolList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new IPPoolList.

func (*IPPoolList) DeepCopyInto 

func (in *IPPoolList) DeepCopyInto(out *IPPoolList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*IPPoolList) DeepCopyObject 

func (in *IPPoolList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type IPPoolSpec 

type IPPoolSpec struct {
	// The pool CIDR.
	CIDR string `json:"cidr" validate:"net"`

	// Contains configuration for VXLAN tunneling for this pool. If not specified,
	// then this is defaulted to "Never" (i.e. VXLAN tunelling is disabled).
	VXLANMode VXLANMode `json:"vxlanMode,omitempty" validate:"omitempty,vxlanMode"`

	// Contains configuration for IPIP tunneling for this pool. If not specified,
	// then this is defaulted to "Never" (i.e. IPIP tunelling is disabled).
	IPIPMode IPIPMode `json:"ipipMode,omitempty" validate:"omitempty,ipIpMode"`

	// When nat-outgoing is true, packets sent from Calico networked containers in
	// this pool to destinations outside of this pool will be masqueraded.
	NATOutgoing bool `json:"natOutgoing,omitempty"`

	// When disabled is true, Calico IPAM will not assign addresses from this pool.
	Disabled bool `json:"disabled,omitempty"`

	// Disable exporting routes from this IP Pool's CIDR over BGP. [Default: false]
	DisableBGPExport bool `json:"disableBGPExport,omitempty" validate:"omitempty"`

	// The block size to use for IP address assignments from this pool. Defaults to 26 for IPv4 and 112 for IPv6.
	BlockSize int `json:"blockSize,omitempty"`

	// Allows IPPool to allocate for a specific node by label selector.
	NodeSelector string `json:"nodeSelector,omitempty" validate:"omitempty,selector"`

	// AWSSubnetID if specified Calico will attempt to ensure that IPs chosen from this IP pool are routed
	// to the corresponding node by adding one or more secondary ENIs to the node and explicitly assigning
	// the IP to one of the secondary ENIs.  Important: since subnets cannot cross availability zones,
	// it's important to use Kubernetes node selectors to avoid scheduling pods to one availability zone
	// using an IP pool that is backed by a subnet that belongs to another availability zone. If AWSSubnetID
	// is specified, then the CIDR of the IP pool must be contained within the specified AWS subnet.
	AWSSubnetID string `json:"awsSubnetID,omitempty" validate:"omitempty"`

	// AllowedUse controls what the IP pool will be used for.  If not specified or empty, defaults to
	// ["Tunnel", "Workload"] for back-compatibility
	AllowedUses []IPPoolAllowedUse `json:"allowedUses,omitempty" validate:"omitempty"`
}

IPPoolSpec contains the specification for an IPPool resource.

func (*IPPoolSpec) DeepCopy 

func (in *IPPoolSpec) DeepCopy() *IPPoolSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new IPPoolSpec.

func (*IPPoolSpec) DeepCopyInto 

func (in *IPPoolSpec) DeepCopyInto(out *IPPoolSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type IptablesBackend 

type IptablesBackend string

type KubeControllersConfiguration added in v1.16.0 

type KubeControllersConfiguration struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`
	Spec              KubeControllersConfigurationSpec `json:"spec,omitempty"`
}

KubeControllersConfiguration contains the configuration for Calico Kubernetes Controllers.

func (*KubeControllersConfiguration) DeepCopy added in v1.16.0 

func (in *KubeControllersConfiguration) DeepCopy() *KubeControllersConfiguration

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new KubeControllersConfiguration.

func (*KubeControllersConfiguration) DeepCopyInto added in v1.16.0 

func (in *KubeControllersConfiguration) DeepCopyInto(out *KubeControllersConfiguration)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*KubeControllersConfiguration) DeepCopyObject added in v1.16.0 

func (in *KubeControllersConfiguration) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type KubeControllersConfigurationList added in v1.16.0 

type KubeControllersConfigurationList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata"`
	Items           []KubeControllersConfiguration `json:"items"`
}

KubeControllersConfigurationList contains a list of KubeControllersConfiguration resources.

func (*KubeControllersConfigurationList) DeepCopy added in v1.16.0 

func (in *KubeControllersConfigurationList) DeepCopy() *KubeControllersConfigurationList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new KubeControllersConfigurationList.

func (*KubeControllersConfigurationList) DeepCopyInto added in v1.16.0 

func (in *KubeControllersConfigurationList) DeepCopyInto(out *KubeControllersConfigurationList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*KubeControllersConfigurationList) DeepCopyObject added in v1.16.0 

func (in *KubeControllersConfigurationList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type KubeControllersConfigurationSpec added in v1.16.0 

type KubeControllersConfigurationSpec struct {
	// PrometheusMetricsPort is the TCP port that the Prometheus metrics server should bind to. Set to 0 to disable. [Default: 9094]
	PrometheusMetricsPort *int `json:"prometheusMetricsPort,omitempty"`
}

KubeControllersConfigurationSpec contains the values of the Kubernetes controllers configuration.

func (*KubeControllersConfigurationSpec) DeepCopy added in v1.16.0 

func (in *KubeControllersConfigurationSpec) DeepCopy() *KubeControllersConfigurationSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new KubeControllersConfigurationSpec.

func (*KubeControllersConfigurationSpec) DeepCopyInto added in v1.16.0 

func (in *KubeControllersConfigurationSpec) DeepCopyInto(out *KubeControllersConfigurationSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type NFTablesMode added in v1.36.0 

type NFTablesMode string
const (
	NFTablesModeEnabled  NFTablesMode = "Enabled"
	NFTablesModeDisabled NFTablesMode = "Disabled"
)

type PrefixAdvertisement added in v1.27.0 

type PrefixAdvertisement struct {
	// CIDR for which properties should be advertised.
	CIDR string `json:"cidr,omitempty" validate:"required,net"`
	// Communities can be list of either community names already defined in `Specs.Communities` or community value of format `aa:nn` or `aa:nn:mm`.
	// For standard community use `aa:nn` format, where `aa` and `nn` are 16 bit number.
	// For large community use `aa:nn:mm` format, where `aa`, `nn` and `mm` are 32 bit number.
	// Where,`aa` is an AS Number, `nn` and `mm` are per-AS identifier.
	Communities []string `json:"communities,omitempty" validate:"required"`
}

PrefixAdvertisement configures advertisement properties for the specified CIDR.

func (*PrefixAdvertisement) DeepCopy added in v1.27.0 

func (in *PrefixAdvertisement) DeepCopy() *PrefixAdvertisement

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new PrefixAdvertisement.

func (*PrefixAdvertisement) DeepCopyInto added in v1.27.0 

func (in *PrefixAdvertisement) DeepCopyInto(out *PrefixAdvertisement)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ProtoPort 

type ProtoPort struct {
	Protocol string `json:"protocol"`
	Port     uint16 `json:"port"`
	Net      string `json:"net"`
}

ProtoPort is combination of protocol, port, and CIDR. All three must be specified.

func (*ProtoPort) DeepCopy 

func (in *ProtoPort) DeepCopy() *ProtoPort

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ProtoPort.

func (*ProtoPort) DeepCopyInto 

func (in *ProtoPort) DeepCopyInto(out *ProtoPort)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type RouteTableRange 

type RouteTableRange struct {
	Min int `json:"min"`
	Max int `json:"max"`
}

func (*RouteTableRange) DeepCopy 

func (in *RouteTableRange) DeepCopy() *RouteTableRange

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new RouteTableRange.

func (*RouteTableRange) DeepCopyInto 

func (in *RouteTableRange) DeepCopyInto(out *RouteTableRange)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ServiceClusterIPBlock added in v1.27.0 

type ServiceClusterIPBlock struct {
	CIDR string `json:"cidr,omitempty" validate:"omitempty,net"`
}

ServiceClusterIPBlock represents a single allowed ClusterIP CIDR block.

func (*ServiceClusterIPBlock) DeepCopy added in v1.27.0 

func (in *ServiceClusterIPBlock) DeepCopy() *ServiceClusterIPBlock

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ServiceClusterIPBlock.

func (*ServiceClusterIPBlock) DeepCopyInto added in v1.27.0 

func (in *ServiceClusterIPBlock) DeepCopyInto(out *ServiceClusterIPBlock)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ServiceExternalIPBlock added in v1.27.0 

type ServiceExternalIPBlock struct {
	CIDR string `json:"cidr,omitempty" validate:"omitempty,net"`
}

ServiceExternalIPBlock represents a single allowed External IP CIDR block.

func (*ServiceExternalIPBlock) DeepCopy added in v1.27.0 

func (in *ServiceExternalIPBlock) DeepCopy() *ServiceExternalIPBlock

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ServiceExternalIPBlock.

func (*ServiceExternalIPBlock) DeepCopyInto added in v1.27.0 

func (in *ServiceExternalIPBlock) DeepCopyInto(out *ServiceExternalIPBlock)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ServiceLoadBalancerIPBlock added in v1.27.0 

type ServiceLoadBalancerIPBlock struct {
	CIDR string `json:"cidr,omitempty" validate:"omitempty,net"`
}

ServiceLoadBalancerIPBlock represents a single allowed LoadBalancer IP CIDR block.

func (*ServiceLoadBalancerIPBlock) DeepCopy added in v1.27.0 

func (in *ServiceLoadBalancerIPBlock) DeepCopy() *ServiceLoadBalancerIPBlock

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ServiceLoadBalancerIPBlock.

func (*ServiceLoadBalancerIPBlock) DeepCopyInto added in v1.27.0 

func (in *ServiceLoadBalancerIPBlock) DeepCopyInto(out *ServiceLoadBalancerIPBlock)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type TPROXYModeOption added in v1.24.0 

type TPROXYModeOption string

+kubebuilder:validation:Enum=DoNothing;Enable;Disable 

const (
	TPROXYModeOptionEnabled  TPROXYModeOption = "Enabled"
	TPROXYModeOptionDisabled TPROXYModeOption = "Disabled"
)

type VXLANMode 

type VXLANMode string
const (
	VXLANModeNever       VXLANMode = "Never"
	VXLANModeAlways      VXLANMode = "Always"
	VXLANModeCrossSubnet VXLANMode = "CrossSubnet"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.