p2p

package
v1.4.4-alpha.0-nomainnet Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 25, 2024 License: MIT Imports: 56 Imported by: 2

README

P2P

Direct connections

If you are running multiple nodes in the local network and exposing all of them is not convenient there is an option to setup network manually, by making couple of nodes publicly available and the rest connected to them directly.

Get network id
  • get it with grpcurl

grpcurl -plaintext 127.0.0.1:9093 spacemesh.v1.DebugService.NetworkInfo

{
  "id": "12D3KooWRfy4Sj4rDHDuBaYw3Mg5d2puwiCyqBCWMziFquaGQ5g8"
}
  • get it from stored data

cat ~/spacemesh/p2p/p2p.key

{"Key":"CAESQAQN38GXvr+L+G+/JWoimpqPBK7I6INe+PKYA+hRJg0I65Q3IPK49Ii9dcnC3+UqB+jMEL16sqDfUubxTs62rZU=","ID":"12D3KooWRfy4Sj4rDHDuBaYw3Mg5d2puwiCyqBCWMziFquaGQ5g8"}
Configuration for public node

Public node should have higher peer limits to help with network connectivity and a list of botnodes. Direct connections should be reciprocal, otherwise public node may prune your private node if overloaded.

Setup more than one public node, and perform rolling upgrades or restart for them if needed.

{
    "p2p": {
        "min-peers": 30,
        "low-peers": 60,
        "high-peers": 100,
        "direct": [
            "/ip4/0.0.0.0/tcp/6000/p2p/12D3KooWRkBh6QayKLb1pDRJGMHE94Lix4ZBVh2BJJeX6mghk8VH"
        ]
    }
}

[!NOTE] Please note that 0.0.0.0 in the above config will work ONLY if all nodes are on the same host. If you're using multiple hosts make sure that you're using proper IPs on both sides. If you're on Windows system, it's recommended to use 127.0.0.1 instead of 0.0.0.0 in the direct part of the config on the same host. You can obviously use any other IP address that is available on the host too, that would allow to use multiple machines for the setup.

Configuration for private node

Set min-peers to the number of peers in the config and disable-dht to true. low-peers and high-peers should not be lower than min-peers.

[!IMPORTANT] Please note that having disable-dht option is critical to properly working public/private node setup.

{
    "p2p": {
        "listen": "/ip4/0.0.0.0/tcp/6000",
        "min-peers": 1,
        "low-peers": 10,
        "high-peers": 20,
        "disable-dht": true,
        "bootnodes": [],
        "direct": [
            "/ip4/0.0.0.0/tcp/7513/p2p/12D3KooWRfy4Sj4rDHDuBaYw3Mg5d2puwiCyqBCWMziFquaGQ5g8"
        ]
    }
}

[!NOTE] Please note that 0.0.0.0 in the above config will work ONLY if all nodes are on the same host. If you're using multiple hosts make sure that you're using proper IPs on both sides. If you're on Windows system, it's recommended to use 127.0.0.1 instead of 0.0.0.0 in the direct part of the config on the same host. You can obviously use any other IP address that is available on the host too, that would allow to use multiple machines for the setup.

Expected result

Public node will maintain many open connections

ss -npO4 | rg spacemesh | rg 7513 | rg ESTAB | wc -l 52

Private will connect only to the specified public node:

ss -npO4 | rg spacemesh | rg 6000

tcp   ESTAB      0      0              127.0.0.1:7513        127.0.0.1:6000  users:(("go-spacemesh",pid=39165,fd=11))
tcp   ESTAB      0      0              127.0.0.1:6000        127.0.0.1:7513  users:(("go-spacemesh",pid=39202,fd=47))

You can also check that by querying the GRPC endpoint:

grpcurl -plaintext 127.0.0.1:9093 spacemesh.v1.AdminService.PeerInfoStream

On your public node you should see many nodes (possibly including bootnodes) and on your private node you should see only the configured public node(s).

Documentation

Index

Constants

View Source
const (
	PublicReachability  = "public"
	PrivateReachability = "private"
)

Variables

This section is empty.

Functions

func EnsureIdentity added in v1.0.0

func EnsureIdentity(dir string) (crypto.PrivKey, error)

EnsureIdentity generates an identity key file in given directory.

func IdentityInfoFromDir added in v1.3.0

func IdentityInfoFromDir(dir string) (string, error)

IdentityInfoFromDir returns a printable ID from a given identity directory.

func IsNoPeer added in v1.0.0

func IsNoPeer(p Peer) bool

IsNoPeer checks if it's any peer.

Types

type AddressList added in v1.3.0

type AddressList []multiaddr.Multiaddr

AddressList represents a list of addresses.

func AddressListFromString added in v1.3.0

func AddressListFromString(s string) (AddressList, error)

AddressListFromString parses a string containing a Multiaddr and returns it as an AddressList.

func AddressListFromStringSlice added in v1.3.0

func AddressListFromStringSlice(s []string) (AddressList, error)

AddressListFromStringSlice parses strings in the slice into Multiaddr values and returns them as an AddressList.

func MustParseAddresses added in v1.3.0

func MustParseAddresses(s ...string) AddressList

MustParseAddresses parses multiaddr strings into AddressList, and panics upon any parse errors.

func (AddressList) String added in v1.3.0

func (al AddressList) String() string

String implements Stringer.

type AutoNATServer added in v1.3.6

type AutoNATServer struct {
	GlobalMax   int           `mapstructure:"global-max"`
	PeerMax     int           `mapstructure:"peer-max"`
	ResetPeriod time.Duration `mapstructure:"reset-period"`
}

type Config added in v1.0.0

type Config struct {
	DataDir            string
	LogLevel           log.Level
	GracePeersShutdown time.Duration `mapstructure:"gracepeersshutdown"`
	MaxMessageSize     int           `mapstructure:"maxmessagesize"`

	// see https://lwn.net/Articles/542629/ for reuseport explanation
	DisableReusePort            bool             `mapstructure:"disable-reuseport"`
	DisableNatPort              bool             `mapstructure:"disable-natport"`
	DisableConnectionManager    bool             `mapstructure:"disable-connection-manager"`
	DisableResourceManager      bool             `mapstructure:"disable-resource-manager"`
	DisableDHT                  bool             `mapstructure:"disable-dht"`
	DisablePubSub               bool             `mapstructure:"disable-pubsub"`
	Flood                       bool             `mapstructure:"flood"`
	Listen                      AddressList      `mapstructure:"listen"`
	Bootnodes                   []string         `mapstructure:"bootnodes"`
	Direct                      []string         `mapstructure:"direct"`
	MinPeers                    int              `mapstructure:"min-peers"`
	LowPeers                    int              `mapstructure:"low-peers"`
	HighPeers                   int              `mapstructure:"high-peers"`
	InboundFraction             float64          `mapstructure:"inbound-fraction"`
	OutboundFraction            float64          `mapstructure:"outbound-fraction"`
	AutoscalePeers              bool             `mapstructure:"autoscale-peers"`
	AdvertiseAddress            AddressList      `mapstructure:"advertise-address"`
	AcceptQueue                 int              `mapstructure:"p2p-accept-queue"`
	Metrics                     bool             `mapstructure:"p2p-metrics"`
	Bootnode                    bool             `mapstructure:"p2p-bootnode"`
	ForceReachability           string           `mapstructure:"p2p-reachability"`
	ForceDHTServer              bool             `mapstructure:"force-dht-server"`
	EnableHolepunching          bool             `mapstructure:"p2p-holepunching"`
	PrivateNetwork              bool             `mapstructure:"p2p-private-network"`
	RelayServer                 RelayServer      `mapstructure:"relay-server"`
	IP4Blocklist                []string         `mapstructure:"ip4-blocklist"`
	IP6Blocklist                []string         `mapstructure:"ip6-blocklist"`
	GossipQueueSize             int              `mapstructure:"gossip-queue-size"`
	GossipPeerOutboundQueueSize int              `mapstructure:"gossip-peer-outbound-queue-size"`
	GossipValidationThrottle    int              `mapstructure:"gossip-validation-throttle"`
	GossipAtxValidationThrottle int              `mapstructure:"gossip-atx-validation-throttle"`
	PingPeers                   []string         `mapstructure:"ping-peers"`
	PingInterval                time.Duration    `mapstructure:"ping-interval"`
	Relay                       bool             `mapstructure:"relay"`
	StaticRelays                []string         `mapstructure:"static-relays"`
	EnableTCPTransport          bool             `mapstructure:"enable-tcp-transport"`
	EnableQUICTransport         bool             `mapstructure:"enable-quic-transport"`
	EnableRoutingDiscovery      bool             `mapstructure:"enable-routing-discovery"`
	RoutingDiscoveryAdvertise   bool             `mapstructure:"routing-discovery-advertise"`
	DiscoveryTimings            DiscoveryTimings `mapstructure:"discovery-timings"`
	AutoNATServer               AutoNATServer    `mapstructure:"auto-nat-server"`
}

Config for all things related to p2p layer.

func DefaultConfig added in v1.0.0

func DefaultConfig() Config

DefaultConfig config.

func (*Config) Validate added in v1.0.7

func (cfg *Config) Validate() error

type ConnectionInfo added in v1.1.2

type ConnectionInfo struct {
	Address  ma.Multiaddr
	Uptime   time.Duration
	Outbound bool
}

type DiscoveryTimings added in v1.3.6

type DiscoveryTimings struct {
	AdvertiseDelay      time.Duration `mapstructure:"advertise-delay"`
	AdvertiseInterval   time.Duration `mapstructure:"advertise-interval"`
	AdvertiseRetryDelay time.Duration `mapstructure:"advertise-retry-delay"`
	FindPeersRetryDelay time.Duration `mapstructure:"find-peers-retry-delay"`
}

type Host added in v1.0.0

type Host struct {
	host.Host
	pubsub.PubSub
	// contains filtered or unexported fields
}

Host is a conveniency wrapper for all p2p related functionality required to run a full spacemesh node.

func AutoStart added in v1.4.2

func AutoStart(ctx context.Context,
	logger log.Log,
	cfg Config,
	prologue []byte,
	quicNetCookie handshake.NetworkCookie,
	opts ...Opt,
) (*Host, error)

AutoStart initializes a new host and starts it.

func New

func New(
	_ context.Context,
	logger log.Log,
	cfg Config,
	prologue []byte,
	quicNetCookie handshake.NetworkCookie,
	opts ...Opt,
) (*Host, error)

New initializes libp2p host configured for spacemesh.

func Upgrade added in v1.0.0

func Upgrade(h host.Host, opts ...Opt) (*Host, error)

Upgrade creates Host instance from host.Host.

func (*Host) Connected added in v1.1.3

func (fh *Host) Connected(p Peer) bool

Connected returns true if the specified peer is connected. Peers that only have transient connections to them aren't considered connected.

func (*Host) ConnectedPeerInfo added in v1.1.2

func (fh *Host) ConnectedPeerInfo(id peer.ID) *PeerInfo

ConnectedPeerInfo retrieves a peer info object for the given peer.ID, if the given peer is not connected then nil is returned.

func (*Host) DHTServerEnabled added in v1.3.0

func (fh *Host) DHTServerEnabled() bool

DHTServerEnabled returns true if the server has DHT running in server mode.

func (*Host) GetPeers added in v1.0.0

func (fh *Host) GetPeers() []Peer

GetPeers returns connected peers.

func (*Host) HaveRelay added in v1.3.0

func (fh *Host) HaveRelay() bool

HaveRelay returns true if this host can be used as a relay, that is, it supports relay service and has public reachability.

func (*Host) KnownAddresses added in v1.3.0

func (fh *Host) KnownAddresses() []ma.Multiaddr

KnownAddresses returns the addresses by which the peers know this one.

func (*Host) ListenAddresses added in v1.3.0

func (fh *Host) ListenAddresses() []ma.Multiaddr

ListenAddresses returns the addresses on which this host listens.

func (*Host) NATDeviceType added in v1.3.0

func (fh *Host) NATDeviceType() (udpNATType, tcpNATType network.NATDeviceType)

NATDeviceType returns NATDeviceType returns the NAT device types for UDP and TCP so far for this host.

func (*Host) NeedPeerDiscovery added in v1.3.0

func (fh *Host) NeedPeerDiscovery() bool

NeedPeerDiscovery returns true if it makes sense to do additional discovery of non-DHT (NATed) peers.

func (*Host) PeerCount added in v1.0.0

func (fh *Host) PeerCount() uint64

PeerCount returns number of connected peers.

func (*Host) PeerProtocols added in v1.1.0

func (fh *Host) PeerProtocols(p Peer) ([]protocol.ID, error)

PeerProtocols returns the protocols supported by peer.

func (*Host) Ping added in v1.3.0

func (fh *Host) Ping() *Ping

Ping returns Ping structure for this Host, if any PingPeers are specified in the config. Otherwise, it returns nil.

func (*Host) Reachability added in v1.3.0

func (fh *Host) Reachability() network.Reachability

Reachability returns reachability of the host (public, private, unknown).

func (*Host) Start added in v1.0.0

func (fh *Host) Start() error

func (*Host) Stop added in v1.0.0

func (fh *Host) Stop() error

Stop background workers and release external resources.

type Opt added in v1.0.0

type Opt func(fh *Host)

Opt is for configuring Host.

func WithBootnodes added in v1.1.2

func WithBootnodes(bootnodes map[peer.ID]struct{}) Opt

func WithConfig added in v1.0.0

func WithConfig(cfg Config) Opt

WithConfig sets Config for Host.

func WithContext added in v1.0.0

func WithContext(ctx context.Context) Opt

WithContext set context for Host.

func WithDirectNodes added in v1.1.2

func WithDirectNodes(direct map[peer.ID]struct{}) Opt

func WithLog added in v1.0.0

func WithLog(logger log.Log) Opt

WithLog configures logger for Host.

func WithNodeReporter added in v1.0.0

func WithNodeReporter(reporter func()) Opt

WithNodeReporter updates reporter that is notified every time when node added or removed a peer.

func WithRelayCandidateChannel added in v1.3.0

func WithRelayCandidateChannel(relayCh chan<- peer.AddrInfo) Opt

type Peer

type Peer = peer.ID

Peer is an alias to libp2p's peer.ID.

const NoPeer Peer = ""

NoPeer is used when peer doesn't matter.

type PeerInfo added in v1.1.2

type PeerInfo struct {
	ID          Peer
	Connections []ConnectionInfo
	Tags        []string
}

PeerInfo groups relevant information about a peer.

type Ping added in v1.3.0

type Ping struct {
	sync.Mutex
	// contains filtered or unexported fields
}

func NewPing added in v1.3.0

func NewPing(logger *zap.Logger, h host.Host, peers []peer.ID, pr routing.PeerRouting, opts ...PingOpt) *Ping

func (*Ping) Start added in v1.3.0

func (p *Ping) Start()

func (*Ping) Stats added in v1.3.0

func (p *Ping) Stats(peerID peer.ID) (numSuccess, numFail int)

func (*Ping) Stop added in v1.3.0

func (p *Ping) Stop()

type PingOpt added in v1.3.0

type PingOpt func(p *Ping)

func WithPingInterval added in v1.3.0

func WithPingInterval(d time.Duration) PingOpt

type RelayServer added in v1.0.7

type RelayServer struct {
	Enable                 bool          `mapstructure:"enable"`
	Reservations           int           `mapstructure:"reservations"`
	TTL                    time.Duration `mapstructure:"ttl"`
	ConnDurationLimit      time.Duration `mapstructure:"conn-duration-limit"`
	ConnDataLimit          int64         `mapstructure:"conn-data-limit"`
	MaxCircuits            int           `mapstructure:"max-circuits"`
	BufferSize             int           `mapstructure:"buffer-size"`
	MaxReservationsPerPeer int           `mapstructure:"max-reservations-per-peer"`
	MaxReservationsPerIP   int           `mapstructure:"max-reservations-per-ip"`
	MaxReservationsPerASN  int           `mapstructure:"max-reservations-per-asn"`
}

Directories

Path Synopsis
mocks
Package mocks is a generated GoMock package.
Package mocks is a generated GoMock package.
nolint
nolint
mocks
Package mocks is a generated GoMock package.
Package mocks is a generated GoMock package.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL