systest/

README

Systest

Installation

This testing setup can run on top of any k8s installation. The instructions below uses minikube.

1. Install minikube: https://minikube.sigs.k8s.io/docs/start/

   On linux x86:

   curl -LO https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64
   sudo install minikube-linux-amd64 /usr/local/bin/minikube
   

2. Grant permissions for default serviceaccount so that it will be allowed to create namespaces by client that runs in-cluster.

   kubectl create clusterrolebinding serviceaccounts-cluster-admin \
     --clusterrole=cluster-admin --group=system:serviceaccounts
   

3. Install chaos-mesh

   chaos-mesh is used for some tests. See https://chaos-mesh.org/docs/quick-start/ for more up-to-date instructions.

   curl -sSL https://mirrors.chaos-mesh.org/v2.5.1/install.sh | bash
   

4. Install loki to use grafana dashboard.

   Please follow instructions on https://grafana.com/docs/loki/latest/installation/microservices-helm/ :

   helm repo add grafana https://grafana.github.io/helm-charts
   helm repo update
   helm upgrade --install loki grafana/loki-stack  --set grafana.enabled=true,prometheus.enabled=true,prometheus.alertmanager.persistentVolume.enabled=false,prometheus.server.persistentVolume.enabled=false,loki.persistence.enabled=true,loki.persistence.storageClassName=standard,loki.persistence.size=20Gi
   

Using Grafana and Loki

To log in grafana dashboard, use username admin, and get password with the following command:

kubectl get secret loki-grafana -o jsonpath="{.data.admin-password}" | base64 --decode ; echo

Make dashboard available on 0.0.0.0:9000:

kubectl port-forward service/loki-grafana 9000:80

Build and Run

1. Allow docker to pull images from local repository.

   eval $(minikube docker-env)
   

2. Build smesher image. Under the root directory of go-spacemesh:

   make dockerbuild-go
   

   note the image tag. e.g. go-spacemesh-dev:develop-dirty

3. Build test image for tests module with make docker.

   cd systest
   make docker
   

4. Run tests.

make run test_name=TestSmeshing smesher_image=<image built with `make dockerbuild-go`> e.g. `smesher_image=go-spacemesh-dev:develop-dirty`

The command will create a pod inside your k8s cluster named systest. After test completes it will clean up after itself. If you want to interrupt the test run make clean - it will gracefully terminate the pod allowing it to clean up the test setup.

If logs were interrupted it is always possible to re-attach to them with make attach.

If you see the following output for a long time (5+ minutes):

➜  systest git:(systest-readme) make run test_name=TestSmeshing smesher_image=go-spacemesh-dev:systest-readme-dirty
pod/systest-eef2da3d created
pod/systest-eef2da3d condition met
=== RUN   TestSmeshing
=== PAUSE TestSmeshing
=== CONT  TestSmeshing
    logger.go:130: 2022-04-17T12:13:00.308Z INFO    using {"namespace": "test-adno"}

please make sure you don't have Pending pods:

➜  ~ kubectl get pods -n test-adno
NAME         READY   STATUS    RESTARTS   AGE
boot-0       1/1     Running   0          52s
boot-1       1/1     Running   0          52s
poet         1/1     Running   0          48s
smesher-0    1/1     Running   0          40s
smesher-1    1/1     Running   0          40s
smesher-10   1/1     Running   0          39s
smesher-11   1/1     Running   0          39s
smesher-12   1/1     Running   0          38s
smesher-13   1/1     Running   0          38s
smesher-14   1/1     Running   0          38s
smesher-15   1/1     Running   0          38s
smesher-16   1/1     Running   0          38s
smesher-17   1/1     Running   0          37s
smesher-2    1/1     Running   0          40s
smesher-3    1/1     Running   0          40s
smesher-4    1/1     Running   0          39s
smesher-5    1/1     Running   0          39s
smesher-6    1/1     Running   0          39s
smesher-7    1/1     Running   0          39s
smesher-8    1/1     Running   0          39s
smesher-9    1/1     Running   0          39s

and if you do:

➜  ~ kubectl get pods -n test-adno
NAME     READY   STATUS    RESTARTS   AGE
boot-0   1/1     Running   0          9m20s
boot-1   1/1     Running   0          9m20s
poet     0/1     Pending   0          9m13s

then please see more details with

➜  ~ kubectl describe pods poet -n test-adno
Name:         poet
Namespace:    test-adno
...
node.kubernetes.io/unreachable:NoExecute op=Exists for 300s
Events:
  Type     Reason            Age                 From               Message
  ----     ------            ----                ----               -------
  Warning  FailedScheduling  69s (x11 over 11m)  default-scheduler  0/1 nodes are available: 1 Insufficient cpu, 1 Insufficient memory.

Most likely you have insufficient CPU or memory and need to make size smaller in your make run command. This is related to minikube setup though and shouldn't be an issue for Kubernetes cluster running in the cloud.

Note

• If you are switching between remote and local k8s, you have to run minikube start before running the tests locally.
• If you did make clean, you will have to install loki again for grafana to be installed.

Parametrizable tests

Tests are parametrized using configmap that must be created in the same namespace where test pod is running. Name of the configmap by default will match name of the pod where tests are running.

Developer can replace configmap that is used in tests by creating a custom one, and updating configname variable.

make run configname=<custom configmap> test_name=TestStepCreate

Alternatively it is possible to replace smesher/poet config and add more values to the config map.

Command below will update configmap to use longer epochs:

make run smesher_config=parameters/longfast/smesher.json poet_config=parameters/longfast/poet.conf test_name=TestStepCreate

Command below will add additional variable to configmap from env file:

echo "layers-to-check=20" >> properties.env
make run properties=properties.env test_name=TestStepCreate

Longevity testing

Manual mode

Manual mode allows to setup a cluster as a separate step and apply tests on that cluster continuously.

The first step creates a cluster with 10 nodes.

export namespace=qqq
make run test_name=TestStepCreate size=10 bootstrap=1m keep=true

Once that step completes user is able to apply different tasks that either modify the cluster, asserts some expectations or enables chaos conditions.

For example creating a batch of transactions:

make run test_name=TestStepTransactions

Or replacing a some part of nodes:

make run test_name=TestStepReplaceNodes

Some steps may be executed concurrently with other steps. In manual mode this must be handled by the operator, for example creating transactions and setting up a short disconnect concurrent is safe:

make run test_name=TestStepTransactions &
make run test_name=TestStepShortDisconnect & 

All such individual steps can be found in systest/steps_test.go.

Scheduler

Individual steps may be also scheduled by any software. For simplicity the first version of scheduler is implemented in golang (see TestScheduleBasic).

It launches a test that will execute sub-tests to create transactions, add nodes, verify consistency of the mesh and that nodes are eventually synced.

export namespace=qqq
make run test_name=TestScheduleBasic size=10 bootstrap=1m keep=true

Storage for longevity tests

See available storage classes using:

kubectl get sc

For longevity tests standard storage class is not sufficiently fast, and has low amount of allocated resources (iops and throughput). Allocated resource also depend on the disk size.

On gke for the network with a moderate load premium-rwo storage class with 10Gi disk size can be used. It will provision ssd disks.

export storage=premium-rwo=10Gi

Schedule chaos tasks for longevity network

Chaos-mesh tasks are scheduled using native chaos-mesh api for flexibility. After cluster was created and all pods of the cluster have spawned it is possible to apply a predefined set of tasks using kubectl

kubectl apply -n <namespace> -f ./parameters/chaos

Or use chaos mesh dashboard for custom chaos tasks.