client

package
v1.10.0-beta0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 28, 2022 License: MIT Imports: 32 Imported by: 2

README

EVM Client

Node FSM

stateDiagram-v2
    [*] --> Started : Start()
    
    state Started {
        [*] --> Undialed
        Undialed --> Unreachable
        Undialed --> Dialed
        
        Unreachable --> Dialed 
        
        Dialed --> Unreachable
        Dialed --> InvalidChainID
        Dialed --> Alive
        
        InvalidChainID --> Unreachable
        InvalidChainID --> Alive
        
        Alive --> Unreachable
        Alive --> OutOfSync
        
        OutOfSync --> Unreachable
        OutOfSync --> InvalidChainID    
        OutOfSync --> Alive    
    }
    
    Started --> Closed : Close()
    Closed --> [*]

Documentation

Index

Constants

View Source 
const (
	NonceTooLow = iota
	ReplacementTransactionUnderpriced
	LimitReached
	TransactionAlreadyInMempool
	TerminallyUnderpriced
	InsufficientEth
	TxFeeExceedsCap
	// Note: L2FeeTooLow/L2FeeTooHigh/L2Full have a very specific meaning specific
	// to L2s (Arbitrum and clones). Do not implement this for non-L2
	// chains. This is potentially confusing because some RPC nodes e.g.
	// Nethermind implement an error called `FeeTooLow` which has distinct
	// meaning from this one.
	L2FeeTooLow
	L2FeeTooHigh
	L2Full
	TransactionAlreadyMined
	Fatal
)
View Source 
const (
	// NodeStateUndialed is the first state of a virgin node
	NodeStateUndialed = NodeState(iota)
	// NodeStateDialed is after a node has successfully dialed but before it has verified the correct chain ID
	NodeStateDialed
	// NodeStateInvalidChainID is after chain ID verification failed
	NodeStateInvalidChainID
	// NodeStateAlive is a healthy node after chain ID verification succeeded
	NodeStateAlive
	// NodeStateUnreachable is a node that cannot be dialed or has disconnected
	NodeStateUnreachable
	// NodeStateOutOfSync is a node that is accepting connections but exceeded
	// the failure threshold without sending any new heads. It will be
	// disconnected, then put into a revive loop and re-awakened after redial
	// if a new head arrives
	NodeStateOutOfSync
	// NodeStateClosed is after the connection has been closed and the node is at the end of its lifecycle
	NodeStateClosed
)
View Source 
const (
	NodeSelectionMode_HighestHead = "HighestHead"
	NodeSelectionMode_RoundRobin  = "RoundRobin"
)
View Source 
const NullClientChainID = 0

NullClientChainID the ChainID that nullclient will return 0 is never used as a real chain ID so makes sense as a dummy value here

Variables

View Source 
var (
	// PromEVMPoolRPCNodeStates reports current RPC node state
	PromEVMPoolRPCNodeStates = promauto.NewGaugeVec(prometheus.GaugeOpts{
		Name: "evm_pool_rpc_node_states",
		Help: "The number of RPC nodes currently in the given state for the given chain",
	}, []string{"evmChainID", "state"})
)

Functions

func ContextWithDefaultTimeoutFromChan added in v1.9.0 

func ContextWithDefaultTimeoutFromChan(chStop <-chan struct{}) (ctx context.Context, cancel context.CancelFunc)

func NewClientWithNodes 

func NewClientWithNodes(logger logger.Logger, cfg PoolConfig, primaryNodes []Node, sendOnlyNodes []SendOnlyNode, chainID *big.Int) (*client, error)

NewClientWithNodes instantiates a client from a list of nodes Currently only supports one primary

func ToBlockNumArg 

func ToBlockNumArg(number *big.Int) string

func WithDefaultTimeout added in v1.9.0 

func WithDefaultTimeout(parent context.Context) (ctx context.Context, cancel context.CancelFunc)

WithDefaultTimeout returns a context inherited from parent with a sensible sanity limit timeout for queries to the eth node This is a sanity limit to try to work around poorly behaved remote WS endpoints that fail to send us data that we requested NO QUERY should ever take longer than this

Types

type BatchSender added in v1.4.0 

type BatchSender interface {
	BatchCallContext(ctx context.Context, b []rpc.BatchElem) error
}

type CallArgs 

type CallArgs struct {
	From common.Address `json:"from"`
	To   common.Address `json:"to"`
	Data hexutil.Bytes  `json:"data"`
}

CallArgs represents the data used to call the balance method of a contract. "To" is the address of the ERC contract. "Data" is the message sent to the contract. "From" is the sender address.

type Client 

type Client interface {
	Dial(ctx context.Context) error
	Close()
	ChainID() *big.Int
	// NodeStates returns a map of node ID->node state
	// It might be nil or empty, e.g. for mock clients etc
	NodeStates() map[int32]string

	GetERC20Balance(ctx context.Context, address common.Address, contractAddress common.Address) (*big.Int, error)
	GetLINKBalance(ctx context.Context, linkAddress common.Address, address common.Address) (*assets.Link, error)
	GetEthBalance(ctx context.Context, account common.Address, blockNumber *big.Int) (*assets.Eth, error)

	// Wrapped RPC methods
	CallContext(ctx context.Context, result interface{}, method string, args ...interface{}) error
	BatchCallContext(ctx context.Context, b []rpc.BatchElem) error
	// BatchCallContextAll calls BatchCallContext for every single node including
	// sendonlys.
	// CAUTION: This should only be used for mass re-transmitting transactions, it
	// might have unexpected effects to use it for anything else.
	BatchCallContextAll(ctx context.Context, b []rpc.BatchElem) error

	// HeadByNumber and HeadByHash is a reimplemented version due to a
	// difference in how block header hashes are calculated by Parity nodes
	// running on Kovan, Avalanche and potentially others. We have to return our own wrapper type to capture the
	// correct hash from the RPC response.
	HeadByNumber(ctx context.Context, n *big.Int) (*evmtypes.Head, error)
	HeadByHash(ctx context.Context, n common.Hash) (*evmtypes.Head, error)
	SubscribeNewHead(ctx context.Context, ch chan<- *evmtypes.Head) (ethereum.Subscription, error)

	// Wrapped Geth client methods
	SendTransaction(ctx context.Context, tx *types.Transaction) error
	PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)
	PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)
	NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)
	TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)
	BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)
	BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)
	BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)
	FilterLogs(ctx context.Context, q ethereum.FilterQuery) ([]types.Log, error)
	SubscribeFilterLogs(ctx context.Context, q ethereum.FilterQuery, ch chan<- types.Log) (ethereum.Subscription, error)
	EstimateGas(ctx context.Context, call ethereum.CallMsg) (uint64, error)
	SuggestGasPrice(ctx context.Context) (*big.Int, error)
	CallContract(ctx context.Context, msg ethereum.CallMsg, blockNumber *big.Int) ([]byte, error)
	CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)

	// bind.ContractBackend methods
	HeaderByNumber(context.Context, *big.Int) (*types.Header, error)
	HeaderByHash(context.Context, common.Hash) (*types.Header, error)
	SuggestGasTipCap(ctx context.Context) (*big.Int, error)
}

Client is the interface used to interact with an ethereum node.

type ClientErrors 

type ClientErrors = map[int]*regexp.Regexp

type JsonError 

type JsonError struct {
	Code    int         `json:"code"`
	Message string      `json:"message"`
	Data    interface{} `json:"data,omitempty"`
}

go-ethereum@v1.10.0/rpc/json.go

func ExtractRPCError 

func ExtractRPCError(baseErr error) (*JsonError, error)

ExtractRPCError attempts to extract a full JsonError (including revert reason details) from an error returned by a CallContract to an external RPC. As per https://github.com/ethereum/go-ethereum/blob/c49e065fea78a5d3759f7853a608494913e5824e/internal/ethapi/api.go#L974 CallContract server side for a revert will return an error which contains either:

  • The error directly from the EVM if there's no data (no revert reason, like an index out of bounds access) which when marshalled will only have a Message.
  • An error which implements rpc.DataError which when marshalled will have a Data field containing the execution result. If the revert not a custom Error (solidity >= 0.8.0), like require(1 == 2, "revert"), then geth and forks will automatically parse the string and put it in the message. If its a custom error, it's up to the client to decode the Data field which will be the abi encoded data of the custom error, i.e. revert MyCustomError(10) -> keccak(MyCustomError(uint256))[:4] || abi.encode(10).

However, it appears that RPCs marshal this in different ways into a JsonError object received client side, some adding "Reverted" prefixes, removing the method signature etc. To avoid RPC specific parsing and support custom errors we return the full object returned from the RPC with a String() method that stringifies all fields for logging so no information is lost. Some examples: kovan (parity) { "error": { "code" : -32015, "data": "Reverted 0xABC123...", "message": "VM execution error." } } // revert reason always omitted from message. rinkeby / ropsten (geth) { "error": { "code": 3, "data": "0xABC123...", "message": "execution reverted: hello world" } } // revert reason automatically parsed if a simple require and included in message.

func ExtractRPCErrorOrNil added in v1.9.0 

func ExtractRPCErrorOrNil(err error) *JsonError

func (*JsonError) Error 

func (err *JsonError) Error() string

func (*JsonError) String 

func (err *JsonError) String() string

type Node 

type Node interface {
	Start(ctx context.Context) error
	Close() error

	// State() returns NodeState
	State() NodeState
	// StateAndLatestBlockNumber() returns NodeState and the latest received block number
	StateAndLatestBlockNumber() (NodeState, int64)
	// Unique identifier for node
	ID() int32
	ChainID() *big.Int

	CallContext(ctx context.Context, result interface{}, method string, args ...interface{}) error
	BatchCallContext(ctx context.Context, b []rpc.BatchElem) error
	SendTransaction(ctx context.Context, tx *types.Transaction) error
	PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)
	PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)
	NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)
	TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)
	BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)
	BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)
	BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)
	FilterLogs(ctx context.Context, q ethereum.FilterQuery) ([]types.Log, error)
	SubscribeFilterLogs(ctx context.Context, q ethereum.FilterQuery, ch chan<- types.Log) (ethereum.Subscription, error)
	EstimateGas(ctx context.Context, call ethereum.CallMsg) (uint64, error)
	SuggestGasPrice(ctx context.Context) (*big.Int, error)
	CallContract(ctx context.Context, msg ethereum.CallMsg, blockNumber *big.Int) ([]byte, error)
	CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)
	HeaderByNumber(context.Context, *big.Int) (*types.Header, error)
	HeaderByHash(context.Context, common.Hash) (*types.Header, error)
	SuggestGasTipCap(ctx context.Context) (*big.Int, error)
	EthSubscribe(ctx context.Context, channel chan<- *evmtypes.Head, args ...interface{}) (ethereum.Subscription, error)

	String() string
}

Node represents a client that connects to an ethereum-compatible RPC node

func NewNode 

func NewNode(nodeCfg NodeConfig, lggr logger.Logger, wsuri url.URL, httpuri *url.URL, name string, id int32, chainID *big.Int) Node

NewNode returns a new *node as Node

type NodeConfig added in v1.3.0 

type NodeConfig interface {
	NodeNoNewHeadsThreshold() time.Duration
	NodePollFailureThreshold() uint32
	NodePollInterval() time.Duration
	NodeSelectionMode() string
}

NodeConfig allows configuration of the node

type NodeSelector added in v1.8.0 

type NodeSelector interface {
	// Select() returns a Node, or nil if none can be selected.
	// Implementation must be thread-safe.
	Select() Node
	// Name() returns the strategy name, e.g. "HighestHead" or "RoundRobin"
	Name() string
}

NodeSelector represents a strategy to select the next node from the pool.

func NewHighestHeadNodeSelector added in v1.8.0 

func NewHighestHeadNodeSelector(nodes []Node) NodeSelector

func NewRoundRobinSelector added in v1.8.0 

func NewRoundRobinSelector(nodes []Node) NodeSelector

type NodeState 

type NodeState int

NodeState represents the current state of the node Node is a FSM (finite state machine)

func (NodeState) GoString added in v1.3.0 

func (n NodeState) GoString() string

GoString prints a prettier state

func (NodeState) String added in v1.3.0 

func (n NodeState) String() string

type NullClient 

type NullClient struct {
	// contains filtered or unexported fields
}

NullClient satisfies the Client but has no side effects

func NewNullClient 

func NewNullClient(cid *big.Int, lggr logger.Logger) *NullClient

func (*NullClient) BalanceAt 

func (nc *NullClient) BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)

func (*NullClient) BatchCallContext 

func (nc *NullClient) BatchCallContext(ctx context.Context, b []rpc.BatchElem) error

func (*NullClient) BatchCallContextAll added in v1.3.0 

func (nc *NullClient) BatchCallContextAll(ctx context.Context, b []rpc.BatchElem) error

BatchCallContextAll implements evmclient.Client interface

func (*NullClient) BlockByHash added in v1.4.0 

func (nc *NullClient) BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)

func (*NullClient) BlockByNumber 

func (nc *NullClient) BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)

func (*NullClient) CallContext 

func (nc *NullClient) CallContext(ctx context.Context, result interface{}, method string, args ...interface{}) error

func (*NullClient) CallContract 

func (nc *NullClient) CallContract(ctx context.Context, msg ethereum.CallMsg, blockNumber *big.Int) ([]byte, error)

func (*NullClient) ChainID 

func (nc *NullClient) ChainID() *big.Int

func (*NullClient) Close 

func (nc *NullClient) Close()

func (*NullClient) CodeAt 

func (nc *NullClient) CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)

func (*NullClient) Dial 

func (nc *NullClient) Dial(context.Context) error

func (*NullClient) EstimateGas 

func (nc *NullClient) EstimateGas(ctx context.Context, call ethereum.CallMsg) (uint64, error)

func (*NullClient) FilterLogs 

func (nc *NullClient) FilterLogs(ctx context.Context, q ethereum.FilterQuery) ([]types.Log, error)

func (*NullClient) GetERC20Balance 

func (nc *NullClient) GetERC20Balance(ctx context.Context, address common.Address, contractAddress common.Address) (*big.Int, error)

func (*NullClient) GetEthBalance 

func (nc *NullClient) GetEthBalance(context.Context, common.Address, *big.Int) (*assets.Eth, error)

func (*NullClient) GetLINKBalance 

func (nc *NullClient) GetLINKBalance(ctx context.Context, linkAddress common.Address, address common.Address) (*assets.Link, error)

func (*NullClient) HeadByHash added in v1.10.0 

func (nc *NullClient) HeadByHash(ctx context.Context, h common.Hash) (*evmtypes.Head, error)

func (*NullClient) HeadByNumber 

func (nc *NullClient) HeadByNumber(ctx context.Context, n *big.Int) (*evmtypes.Head, error)

func (*NullClient) HeaderByHash added in v1.8.0 

func (nc *NullClient) HeaderByHash(ctx context.Context, h common.Hash) (*types.Header, error)

func (*NullClient) HeaderByNumber 

func (nc *NullClient) HeaderByNumber(ctx context.Context, n *big.Int) (*types.Header, error)

func (*NullClient) NodeStates added in v1.3.0 

func (nc *NullClient) NodeStates() map[int32]string

NodeStates implements evmclient.Client

func (*NullClient) NonceAt 

func (nc *NullClient) NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)

func (*NullClient) PendingCodeAt 

func (nc *NullClient) PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)

func (*NullClient) PendingNonceAt 

func (nc *NullClient) PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)

func (*NullClient) SendTransaction 

func (nc *NullClient) SendTransaction(ctx context.Context, tx *types.Transaction) error

func (*NullClient) SubscribeFilterLogs 

func (nc *NullClient) SubscribeFilterLogs(ctx context.Context, q ethereum.FilterQuery, ch chan<- types.Log) (ethereum.Subscription, error)

func (*NullClient) SubscribeNewHead 

func (nc *NullClient) SubscribeNewHead(ctx context.Context, ch chan<- *evmtypes.Head) (ethereum.Subscription, error)

func (*NullClient) SuggestGasPrice 

func (nc *NullClient) SuggestGasPrice(ctx context.Context) (*big.Int, error)

func (*NullClient) SuggestGasTipCap 

func (nc *NullClient) SuggestGasTipCap(ctx context.Context) (tipCap *big.Int, err error)

func (*NullClient) TransactionReceipt 

func (nc *NullClient) TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)

type Pool 

type Pool struct {
	utils.StartStopOnce
	// contains filtered or unexported fields
}

Pool represents an abstraction over one or more primary nodes It is responsible for liveness checking and balancing queries across live nodes

func NewPool 

func NewPool(logger logger.Logger, cfg PoolConfig, nodes []Node, sendonlys []SendOnlyNode, chainID *big.Int) *Pool

func (*Pool) BalanceAt 

func (p *Pool) BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)

func (*Pool) BatchCallContext 

func (p *Pool) BatchCallContext(ctx context.Context, b []rpc.BatchElem) error

func (*Pool) BatchCallContextAll added in v1.3.0 

func (p *Pool) BatchCallContextAll(ctx context.Context, b []rpc.BatchElem) error

BatchCallContextAll calls BatchCallContext for every single node including sendonlys. CAUTION: This should only be used for mass re-transmitting transactions, it might have unexpected effects to use it for anything else.

func (*Pool) BlockByHash added in v1.4.0 

func (p *Pool) BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)

func (*Pool) BlockByNumber 

func (p *Pool) BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)

func (*Pool) CallContext 

func (p *Pool) CallContext(ctx context.Context, result interface{}, method string, args ...interface{}) error

func (*Pool) CallContract 

func (p *Pool) CallContract(ctx context.Context, msg ethereum.CallMsg, blockNumber *big.Int) ([]byte, error)

func (*Pool) ChainID 

func (p *Pool) ChainID() *big.Int

func (*Pool) Close 

func (p *Pool) Close() error

Close tears down the pool and closes all nodes

func (*Pool) CodeAt 

func (p *Pool) CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)

func (*Pool) Dial 

func (p *Pool) Dial(ctx context.Context) error

Dial starts every node in the pool

func (*Pool) EstimateGas 

func (p *Pool) EstimateGas(ctx context.Context, call ethereum.CallMsg) (uint64, error)

func (*Pool) EthSubscribe 

func (p *Pool) EthSubscribe(ctx context.Context, channel chan<- *evmtypes.Head, args ...interface{}) (ethereum.Subscription, error)

EthSubscribe implements evmclient.Client

func (*Pool) FilterLogs 

func (p *Pool) FilterLogs(ctx context.Context, q ethereum.FilterQuery) ([]types.Log, error)

func (*Pool) HeaderByHash added in v1.8.0 

func (p *Pool) HeaderByHash(ctx context.Context, h common.Hash) (*types.Header, error)

func (*Pool) HeaderByNumber 

func (p *Pool) HeaderByNumber(ctx context.Context, n *big.Int) (*types.Header, error)

bind.ContractBackend methods

func (*Pool) NonceAt 

func (p *Pool) NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)

func (*Pool) PendingCodeAt 

func (p *Pool) PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)

func (*Pool) PendingNonceAt 

func (p *Pool) PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)

func (*Pool) SendTransaction 

func (p *Pool) SendTransaction(ctx context.Context, tx *types.Transaction) error

Wrapped Geth client methods

func (*Pool) SubscribeFilterLogs 

func (p *Pool) SubscribeFilterLogs(ctx context.Context, q ethereum.FilterQuery, ch chan<- types.Log) (ethereum.Subscription, error)

func (*Pool) SuggestGasPrice 

func (p *Pool) SuggestGasPrice(ctx context.Context) (*big.Int, error)

func (*Pool) SuggestGasTipCap 

func (p *Pool) SuggestGasTipCap(ctx context.Context) (*big.Int, error)

func (*Pool) TransactionReceipt 

func (p *Pool) TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)

type PoolConfig added in v1.8.0 

type PoolConfig interface {
	NodeSelectionMode() string
	NodeNoNewHeadsThreshold() time.Duration
}

PoolConfig represents settings for the Pool

type SendError 

type SendError struct {
	// contains filtered or unexported fields
}

fatal means this transaction can never be accepted even with a different nonce or higher gas price

func NewFatalSendError 

func NewFatalSendError(e error) *SendError

func NewSendError 

func NewSendError(e error) *SendError

func NewSendErrorS 

func NewSendErrorS(s string) *SendError

func (*SendError) CauseStr 

func (s *SendError) CauseStr() string

CauseStr returns the string of the original error

func (*SendError) Error 

func (s *SendError) Error() string

func (*SendError) Fatal 

func (s *SendError) Fatal() bool

Fatal indicates whether the error should be considered fatal or not Fatal errors mean that no matter how many times the send is retried, no node will ever accept it

func (*SendError) IsInsufficientEth 

func (s *SendError) IsInsufficientEth() bool

func (*SendError) IsL2FeeTooHigh added in v1.8.1 

func (s *SendError) IsL2FeeTooHigh() bool

IsL2FeeTooHigh is an l2-specific error returned when total fee is too high

func (*SendError) IsL2Full added in v1.8.1 

func (s *SendError) IsL2Full() bool

IsL2Full is an l2-specific error returned when the queue or mempool is full.

func (*SendError) IsNonceTooLowError 

func (s *SendError) IsNonceTooLowError() bool

func (*SendError) IsReplacementUnderpriced 

func (s *SendError) IsReplacementUnderpriced() bool

IsReplacementUnderpriced indicates that a transaction already exists in the mempool with this nonce but a different gas price or payload

func (*SendError) IsTemporarilyUnderpriced 

func (s *SendError) IsTemporarilyUnderpriced() bool

func (*SendError) IsTerminallyUnderpriced 

func (s *SendError) IsTerminallyUnderpriced() bool

IsTerminallyUnderpriced indicates that this transaction is so far underpriced the node won't even accept it in the first place

func (*SendError) IsTimeout added in v1.7.0 

func (s *SendError) IsTimeout() bool

IsTimeout indicates if the error was caused by an exceeded context deadline

func (*SendError) IsTransactionAlreadyInMempool 

func (s *SendError) IsTransactionAlreadyInMempool() bool

Geth/parity returns this error if the transaction is already in the node's mempool

func (*SendError) IsTransactionAlreadyMined added in v1.3.0 

func (s *SendError) IsTransactionAlreadyMined() bool

IsTransactionAlreadyMined - Harmony returns this error if the transaction has already been mined

func (*SendError) IsTxFeeExceedsCap added in v1.6.0 

func (s *SendError) IsTxFeeExceedsCap() bool

IsTxFeeExceedsCap returns true if the transaction and gas price are combined in some way that makes the total transaction too expensive for the eth node to accept at all. No amount of retrying at this or higher gas prices can ever succeed.

func (*SendError) L2FeeTooLow added in v1.8.1 

func (s *SendError) L2FeeTooLow() bool

L2FeeTooLow is an l2-specific error returned when total fee is too low

type SendOnlyNode 

type SendOnlyNode interface {
	// Start may attempt to connect to the node, but should only return error for misconfiguration - never for temporary errors.
	Start(context.Context) error
	Close() error

	ChainID() (chainID *big.Int)

	SendTransaction(ctx context.Context, tx *types.Transaction) error
	BatchCallContext(ctx context.Context, b []rpc.BatchElem) error

	String() string
}

SendOnlyNode represents one ethereum node used as a sendonly

func NewSendOnlyNode 

func NewSendOnlyNode(lggr logger.Logger, httpuri url.URL, name string, chainID *big.Int) SendOnlyNode

NewSendOnlyNode returns a new sendonly node

type SimulatedBackendClient 

type SimulatedBackendClient struct {
	// contains filtered or unexported fields
}

SimulatedBackendClient is an Client implementation using a simulated blockchain backend. Note that not all RPC methods are implemented here.

func NewSimulatedBackendClient 

func NewSimulatedBackendClient(t testing.TB, b *backends.SimulatedBackend, chainId *big.Int) *SimulatedBackendClient

NewSimulatedBackendClient creates an eth client backed by a simulated backend.

func (*SimulatedBackendClient) BalanceAt 

func (c *SimulatedBackendClient) BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)

BalanceAt gets balance as of a specified block.

func (*SimulatedBackendClient) BatchCallContext 

func (c *SimulatedBackendClient) BatchCallContext(ctx context.Context, b []rpc.BatchElem) error

BatchCallContext makes a batch rpc call.

func (*SimulatedBackendClient) BatchCallContextAll added in v1.3.0 

func (c *SimulatedBackendClient) BatchCallContextAll(ctx context.Context, b []rpc.BatchElem) error

BatchCallContextAll makes a batch rpc call.

func (*SimulatedBackendClient) BlockByHash added in v1.4.0 

func (c *SimulatedBackendClient) BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)

BlockByNumber returns a geth block type.

func (*SimulatedBackendClient) BlockByNumber 

func (c *SimulatedBackendClient) BlockByNumber(ctx context.Context, n *big.Int) (*types.Block, error)

BlockByNumber returns a geth block type.

func (*SimulatedBackendClient) CallContext 

func (c *SimulatedBackendClient) CallContext(ctx context.Context, result interface{}, method string, args ...interface{}) error

CallContext mocks the ethereum client RPC calls used by chainlink, copying the return value into result.

func (*SimulatedBackendClient) CallContract 

func (c *SimulatedBackendClient) CallContract(ctx context.Context, msg ethereum.CallMsg, blockNumber *big.Int) ([]byte, error)

CallContract calls a contract.

func (*SimulatedBackendClient) ChainID 

func (c *SimulatedBackendClient) ChainID() *big.Int

ChainID returns the ethereum ChainID.

func (*SimulatedBackendClient) Close 

func (c *SimulatedBackendClient) Close()

Close does nothing. We ought not close the underlying backend here since other simulated clients might still be using it

func (*SimulatedBackendClient) CodeAt 

func (c *SimulatedBackendClient) CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)

CodeAt gets the code associated with an account as of a specified block.

func (*SimulatedBackendClient) Dial 

func (c *SimulatedBackendClient) Dial(context.Context) error

Dial noop for the sim.

func (*SimulatedBackendClient) EstimateGas 

func (c *SimulatedBackendClient) EstimateGas(ctx context.Context, call ethereum.CallMsg) (gas uint64, err error)

EstimateGas estimates gas for a msg.

func (*SimulatedBackendClient) FilterLogs 

func (c *SimulatedBackendClient) FilterLogs(ctx context.Context, q ethereum.FilterQuery) (logs []types.Log, err error)

FilterLogs returns all logs that respect the passed filter query.

func (*SimulatedBackendClient) GetERC20Balance 

func (c *SimulatedBackendClient) GetERC20Balance(ctx context.Context, address common.Address, contractAddress common.Address) (balance *big.Int, err error)

GetERC20Balance returns the balance of the given address for the token contract address.

func (*SimulatedBackendClient) GetEthBalance 

func (c *SimulatedBackendClient) GetEthBalance(ctx context.Context, account common.Address, blockNumber *big.Int) (*assets.Eth, error)

GetEthBalance helper to get eth balance

func (*SimulatedBackendClient) GetLINKBalance 

func (c *SimulatedBackendClient) GetLINKBalance(ctx context.Context, linkAddress common.Address, address common.Address) (*assets.Link, error)

GetLINKBalance get link balance.

func (*SimulatedBackendClient) HeadByHash added in v1.10.0 

func (c *SimulatedBackendClient) HeadByHash(ctx context.Context, h common.Hash) (*evmtypes.Head, error)

HeadByHash returns our own header type.

func (*SimulatedBackendClient) HeadByNumber 

func (c *SimulatedBackendClient) HeadByNumber(ctx context.Context, n *big.Int) (*evmtypes.Head, error)

HeadByNumber returns our own header type.

func (*SimulatedBackendClient) HeaderByHash added in v1.8.0 

func (c *SimulatedBackendClient) HeaderByHash(ctx context.Context, h common.Hash) (*types.Header, error)

func (*SimulatedBackendClient) HeaderByNumber 

func (c *SimulatedBackendClient) HeaderByNumber(ctx context.Context, n *big.Int) (*types.Header, error)

HeaderByNumber returns the geth header type.

func (*SimulatedBackendClient) NodeStates added in v1.3.0 

func (c *SimulatedBackendClient) NodeStates() map[int32]string

NodeStates implements evmclient.Client

func (*SimulatedBackendClient) NonceAt 

func (c *SimulatedBackendClient) NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)

NonceAt gets nonce as of a specified block.

func (*SimulatedBackendClient) PendingCodeAt 

func (c *SimulatedBackendClient) PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)

PendingCodeAt gets the latest code.

func (*SimulatedBackendClient) PendingNonceAt 

func (c *SimulatedBackendClient) PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)

PendingNonceAt gets pending nonce i.e. mempool nonce.

func (*SimulatedBackendClient) SendTransaction 

func (c *SimulatedBackendClient) SendTransaction(ctx context.Context, tx *types.Transaction) error

SendTransaction sends a transaction.

func (*SimulatedBackendClient) SubscribeFilterLogs 

func (c *SimulatedBackendClient) SubscribeFilterLogs(ctx context.Context, q ethereum.FilterQuery, channel chan<- types.Log) (ethereum.Subscription, error)

SubscribeFilterLogs registers a subscription for push notifications of logs from a given address.

func (*SimulatedBackendClient) SubscribeNewHead 

func (c *SimulatedBackendClient) SubscribeNewHead(
	ctx context.Context,
	channel chan<- *evmtypes.Head,
) (ethereum.Subscription, error)

SubscribeNewHead registers a subscription for push notifications of new blocks. Note the sim's API only accepts types.Head so we have this goroutine to convert those into evmtypes.Head.

func (*SimulatedBackendClient) SuggestGasPrice 

func (c *SimulatedBackendClient) SuggestGasPrice(ctx context.Context) (*big.Int, error)

SuggestGasPrice recommends a gas price.

func (*SimulatedBackendClient) SuggestGasTipCap 

func (c *SimulatedBackendClient) SuggestGasTipCap(ctx context.Context) (tipCap *big.Int, err error)

SuggestGasTipCap suggests a gas tip cap.

func (*SimulatedBackendClient) TransactionReceipt 

func (c *SimulatedBackendClient) TransactionReceipt(ctx context.Context, receipt common.Hash) (*types.Receipt, error)

TransactionReceipt returns the transaction receipt for the given transaction hash.

type Subscription 

type Subscription interface {
	Err() <-chan error
	Unsubscribe()
}

This interface only exists so that we can generate a mock for it. It is identical to `ethereum.Subscription`.

type TxSender added in v1.4.0 

type TxSender interface {
	SendTransaction(ctx context.Context, tx *types.Transaction) error
	ChainID(context.Context) (*big.Int, error)
}

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.