mount

Documentation

Index

• Constants
• func ForceMount(device, target, mType, options string) error
• func ForceUnmount(target string) (err error)
• func MakePrivate(mountPoint string) error
• func MakeRPrivate(mountPoint string) error
• func MakeRShared(mountPoint string) error
• func MakeRSlave(mountPoint string) error
• func MakeRUnbindable(mountPoint string) error
• func MakeShared(mountPoint string) error
• func MakeSlave(mountPoint string) error
• func MakeUnbindable(mountPoint string) error
• func Mount(device, target, mType, options string) error
• func Mounted(mountpoint string) (bool, error)
• func ParseTmpfsOptions(options string) (int, string, error)
• func Unmount(target string) error
• type Info
  • func GetMounts() ([]*Info, error)
  • func PidMountInfo(pid int) ([]*Info, error)

Constants

const (
	// RDONLY will mount the file system read-only.
	RDONLY = syscall.MS_RDONLY

	// NOSUID will not allow set-user-identifier or set-group-identifier bits to
	// take effect.
	NOSUID = syscall.MS_NOSUID

	// NODEV will not interpret character or block special devices on the file
	// system.
	NODEV = syscall.MS_NODEV

	// NOEXEC will not allow execution of any binaries on the mounted file system.
	NOEXEC = syscall.MS_NOEXEC

	// SYNCHRONOUS will allow I/O to the file system to be done synchronously.
	SYNCHRONOUS = syscall.MS_SYNCHRONOUS

	// DIRSYNC will force all directory updates within the file system to be done
	// synchronously. This affects the following system calls: creat, link,
	// unlink, symlink, mkdir, rmdir, mknod and rename.
	DIRSYNC = syscall.MS_DIRSYNC

	// REMOUNT will attempt to remount an already-mounted file system. This is
	// commonly used to change the mount flags for a file system, especially to
	// make a readonly file system writeable. It does not change device or mount
	// point.
	REMOUNT = syscall.MS_REMOUNT

	// MANDLOCK will force mandatory locks on a filesystem.
	MANDLOCK = syscall.MS_MANDLOCK

	// NOATIME will not update the file access time when reading from a file.
	NOATIME = syscall.MS_NOATIME

	// NODIRATIME will not update the directory access time.
	NODIRATIME = syscall.MS_NODIRATIME

	// BIND remounts a subtree somewhere else.
	BIND = syscall.MS_BIND

	// RBIND remounts a subtree and all possible submounts somewhere else.
	RBIND = syscall.MS_BIND | syscall.MS_REC

	// UNBINDABLE creates a mount which cannot be cloned through a bind operation.
	UNBINDABLE = syscall.MS_UNBINDABLE

	// RUNBINDABLE marks the entire mount tree as UNBINDABLE.
	RUNBINDABLE = syscall.MS_UNBINDABLE | syscall.MS_REC

	// PRIVATE creates a mount which carries no propagation abilities.
	PRIVATE = syscall.MS_PRIVATE

	// RPRIVATE marks the entire mount tree as PRIVATE.
	RPRIVATE = syscall.MS_PRIVATE | syscall.MS_REC

	// SLAVE creates a mount which receives propagation from its master, but not
	// vice versa.
	SLAVE = syscall.MS_SLAVE

	// RSLAVE marks the entire mount tree as SLAVE.
	RSLAVE = syscall.MS_SLAVE | syscall.MS_REC

	// SHARED creates a mount which provides the ability to create mirrors of
	// that mount such that mounts and unmounts within any of the mirrors
	// propagate to the other mirrors.
	SHARED = syscall.MS_SHARED

	// RSHARED marks the entire mount tree as SHARED.
	RSHARED = syscall.MS_SHARED | syscall.MS_REC

	// RELATIME updates inode access times relative to modify or change time.
	RELATIME = syscall.MS_RELATIME

	// STRICTATIME allows to explicitly request full atime updates.  This makes
	// it possible for the kernel to default to relatime or noatime but still
	// allow userspace to override it.
	STRICTATIME = syscall.MS_STRICTATIME
)

Functions

func ForceMount

func ForceMount(device, target, mType, options string) error

ForceMount will mount a filesystem according to the specified configuration, *regardless* if the target path is not already mounted. Options must be specified like the mount or fstab unix commands: "opt1=val1,opt2=val2". See flags.go for supported option flags.

func ForceUnmount

func ForceUnmount(target string) (err error)

ForceUnmount will force an unmount of the target filesystem, regardless if it is mounted or not.

func MakePrivate

func MakePrivate(mountPoint string) error

MakePrivate ensures a mounted filesystem has the PRIVATE mount option enabled. See the supported options in flags.go for further reference.

func MakeRPrivate

func MakeRPrivate(mountPoint string) error

MakeRPrivate ensures a mounted filesystem has the RPRIVATE mount option enabled. See the supported options in flags.go for further reference.

func MakeRShared

func MakeRShared(mountPoint string) error

MakeRShared ensures a mounted filesystem has the RSHARED mount option enabled. See the supported options in flags.go for further reference.

func MakeRSlave

func MakeRSlave(mountPoint string) error

MakeRSlave ensures a mounted filesystem has the RSLAVE mount option enabled. See the supported options in flags.go for further reference.

func MakeRUnbindable

func MakeRUnbindable(mountPoint string) error

MakeRUnbindable ensures a mounted filesystem has the RUNBINDABLE mount option enabled. See the supported options in flags.go for further reference.

func MakeShared

func MakeShared(mountPoint string) error

MakeShared ensures a mounted filesystem has the SHARED mount option enabled. See the supported options in flags.go for further reference.

func MakeSlave

func MakeSlave(mountPoint string) error

MakeSlave ensures a mounted filesystem has the SLAVE mount option enabled. See the supported options in flags.go for further reference.

func MakeUnbindable

func MakeUnbindable(mountPoint string) error

MakeUnbindable ensures a mounted filesystem has the UNBINDABLE mount option enabled. See the supported options in flags.go for further reference.

func Mount

func Mount(device, target, mType, options string) error

Mount will mount filesystem according to the specified configuration, on the condition that the target path is *not* already mounted. Options must be specified like the mount or fstab unix commands: "opt1=val1,opt2=val2". See flags.go for supported option flags.

func Mounted

func Mounted(mountpoint string) (bool, error)

Mounted looks at /proc/self/mountinfo to determine of the specified mountpoint has been mounted

func ParseTmpfsOptions

func ParseTmpfsOptions(options string) (int, string, error)

ParseTmpfsOptions parse fstab type mount options into flags and data

func Unmount

func Unmount(target string) error

Unmount will unmount the target filesystem, so long as it is mounted.

Types

type Info

type Info struct {
	// ID is a unique identifier of the mount (may be reused after umount).
	ID int

	// Parent indicates the ID of the mount parent (or of self for the top of the
	// mount tree).
	Parent int

	// Major indicates one half of the device ID which identifies the device class.
	Major int

	// Minor indicates one half of the device ID which identifies a specific
	// instance of device.
	Minor int

	// Root of the mount within the filesystem.
	Root string

	// Mountpoint indicates the mount point relative to the process's root.
	Mountpoint string

	// Opts represents mount-specific options.
	Opts string

	// Optional represents optional fields.
	Optional string

	// Fstype indicates the type of filesystem, such as EXT3.
	Fstype string

	// Source indicates filesystem specific information or "none".
	Source string

	// VfsOpts represents per super block options.
	VfsOpts string
}

Info reveals information about a particular mounted filesystem. This struct is populated from the content in the /proc/<pid>/mountinfo file.

func GetMounts

func GetMounts() ([]*Info, error)

GetMounts retrieves a list of mounts for the current running process.

func PidMountInfo

func PidMountInfo(pid int) ([]*Info, error)

PidMountInfo collects the mounts for a specific process ID. If the process ID is unknown, it is better to use `GetMounts` which will inspect "/proc/self/mountinfo" instead.