win

package
v1.1.17 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 1, 2018 License: LGPL-2.1 Imports: 0 Imported by: 0

README

win包中的winapi以UNICODE为准。

内部转换函数

CStr 即UTF8转Unicode

GoStr 即Unicode转UTF8

CBool 即Go Bool转 C Bool

GoBool 即 C Bool 转 Go Bool

UTF8ToANSI utf8转ansi

Documentation

Index

Constants

View Source 
const (
	MB_OK               = 0x00000000
	MB_OKCANCEL         = 0x00000001
	MB_ABORTRETRYIGNORE = 0x00000002
	MB_YESNOCANCEL      = 0x00000003
	MB_YESNO            = 0x00000004
	MB_RETRYCANCEL      = 0x00000005

	MB_ICONHAND        = 0x00000010
	MB_ICONQUESTION    = 0x00000020
	MB_ICONEXCLAMATION = 0x00000030
	MB_ICONASTERISK    = 0x00000040
	MB_USERICON        = 0x00000080
	MB_ICONWARNING     = MB_ICONEXCLAMATION
	MB_ICONERROR       = MB_ICONHAND
	MB_ICONINFORMATION = MB_ICONASTERISK
	MB_ICONSTOP        = MB_ICONHAND
	MB_DEFBUTTON1      = 0x00000000
	MB_DEFBUTTON2      = 0x00000100
	MB_DEFBUTTON3      = 0x00000200
	MB_DEFBUTTON4      = 0x00000300
	MB_APPLMODAL       = 0x00000000
	MB_SYSTEMMODAL     = 0x00001000
	MB_TASKMODAL       = 0x00002000
	MB_HELP            = 0x00004000 // Help Button

	MB_NOFOCUS              = 0x00008000
	MB_SETFOREGROUND        = 0x00010000
	MB_DEFAULT_DESKTOP_ONLY = 0x00020000

	MB_TOPMOST    = 0x00040000
	MB_RIGHT      = 0x00080000
	MB_RTLREADING = 0x00100000

	MB_SERVICE_NOTIFICATION      = 0x00200000
	MB_SERVICE_NOTIFICATION_NT3X = 0x00040000

	MB_TYPEMASK = 0x0000000F
	MB_ICONMASK = 0x000000F0
	MB_DEFMASK  = 0x00000F00
	MB_MODEMASK = 0x00003000
	MB_MISCMASK = 0x0000C000
)

MessageBox() Flags

View Source 
const (
	HKEY_CLASSES_ROOT     = 0x80000000
	HKEY_CURRENT_USER     = 0x80000001
	HKEY_LOCAL_MACHINE    = 0x80000002
	HKEY_USERS            = 0x80000003
	HKEY_PERFORMANCE_DATA = 0x80000004
	HKEY_CURRENT_CONFIG   = 0x80000005
	HKEY_DYN_DATA         = 0x80000006
)
View Source 
const (
	DELETE                  = 0x00010000 // Renamed from DELETE
	READ_CONTROL            = 0x00020000
	WRITE_DAC               = 0x00040000
	WRITE_OWNER             = 0x00080000
	STANDARD_RIGHTS_READ    = READ_CONTROL
	STANDARD_RIGHTS_WRITE   = READ_CONTROL
	STANDARD_RIGHTS_EXECUTE = READ_CONTROL
	STANDARD_RIGHTS_ALL     = 0x001F0000
	SPECIFIC_RIGHTS_ALL     = 0x0000FFFF
	ACCESS_SYSTEM_SECURITY  = 0x01000000
	MAXIMUM_ALLOWED         = 0x02000000
	GENERIC_READ            = 0x80000000
	GENERIC_WRITE           = 0x40000000
	GENERIC_EXECUTE         = 0x20000000
	GENERIC_ALL             = 0x10000000

	KEY_QUERY_VALUE        = 0x0001
	KEY_SET_VALUE          = 0x0002
	KEY_CREATE_SUB_KEY     = 0x0004
	KEY_ENUMERATE_SUB_KEYS = 0x0008
	KEY_NOTIFY             = 0x0010
	KEY_CREATE_LINK        = 0x0020
	KEY_WOW64_32KEY        = 0x0200
	KEY_WOW64_64KEY        = 0x0100
	KEY_WOW64_RES          = 0x0300

	// (STANDARD_RIGHTS_READ | KEY_QUERY_VALUE | KEY_ENUMERATE_SUB_KEYS | KEY_NOTIFY) & ^SYNCHRONIZE
	KEY_READ = 0x00020019
	// (STANDARD_RIGHTS_WRITE | KEY_SET_VALUE | KEY_CREATE_SUB_KEY) & ^SYNCHRONIZE
	KEY_WRITE = 0x00020006
	//  KEY_READ & ^SYNCHRONIZE
	KEY_EXECUTE = 0x00020019

	// (STANDARD_RIGHTS_ALL | KEY_QUERY_VALUE |
	//		KEY_SET_VALUE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS |
	//		KEY_NOTIFY | KEY_CREATE_LINK) & ^SYNCHRONIZE
	KEY_ALL_ACCESS = 0x000F003F
)
View Source 
const (
	GWL_WNDPROC    = -4
	GWL_HINSTANCE  = -6
	GWL_HWNDPARENT = -8
	GWL_STYLE      = -16
	GWL_EXSTYLE    = -20
	GWL_USERDATA   = -21
	GWL_ID         = -12
)

SetWindowLongPtr GetWindowLongPtr

View Source 
const (
	// System Menu Command Values
	SC_SIZE         = 61440
	SC_MOVE         = 61456
	SC_MINIMIZE     = 61472
	SC_MAXIMIZE     = 61488
	SC_NEXTWINDOW   = 61504
	SC_PREVWINDOW   = 61520
	SC_CLOSE        = 61536
	SC_VSCROLL      = 61552
	SC_HSCROLL      = 61568
	SC_MOUSEMENU    = 61584
	SC_KEYMENU      = 61696
	SC_ARRANGE      = 61712
	SC_RESTORE      = 61728
	SC_TASKLIST     = 61744
	SC_SCREENSAVE   = 61760
	SC_HOTKEY       = 61776
	SC_DEFAULT      = 61792
	SC_MONITORPOWER = 61808
	SC_CONTEXTHELP  = 61824
	SC_SEPARATOR    = 61455

	SCF_ISSECURE = 0x00000001

	// Obsolete names
	SC_ICON = SC_MINIMIZE
	SC_ZOOM = SC_MAXIMIZE
)
View Source 
const (
	// Scroll Bar Constants
	SB_HORZ = 0
	SB_VERT = 1
	SB_CTL  = 2
	SB_BOTH = 3

	// Scroll Bar Commands
	SB_LINEUP        = 0
	SB_LINELEFT      = 0
	SB_LINEDOWN      = 1
	SB_LINERIGHT     = 1
	SB_PAGEUP        = 2
	SB_PAGELEFT      = 2
	SB_PAGEDOWN      = 3
	SB_PAGERIGHT     = 3
	SB_THUMBPOSITION = 4
	SB_THUMBTRACK    = 5
	SB_TOP           = 6
	SB_LEFT          = 6
	SB_BOTTOM        = 7
	SB_RIGHT         = 7
	SB_ENDSCROLL     = 8

	// ShowWindow() Commands
	SW_HIDE            = 0
	SW_SHOWNORMAL      = 1
	SW_NORMAL          = 1
	SW_SHOWMINIMIZED   = 2
	SW_SHOWMAXIMIZED   = 3
	SW_MAXIMIZE        = 3
	SW_SHOWNOACTIVATE  = 4
	SW_SHOW            = 5
	SW_MINIMIZE        = 6
	SW_SHOWMINNOACTIVE = 7
	SW_SHOWNA          = 8
	SW_RESTORE         = 9
	SW_SHOWDEFAULT     = 10
	SW_FORCEMINIMIZE   = 11
	SW_MAX             = 11

	// Old ShowWindow() Commands
	HIDE_WINDOW         = 0
	SHOW_OPENWINDOW     = 1
	SHOW_ICONWINDOW     = 2
	SHOW_FULLSCREEN     = 3
	SHOW_OPENNOACTIVATE = 4

	// Identifiers for the WM_SHOWWINDOW message
	SW_PARENTCLOSING = 1
	SW_OTHERZOOM     = 2
	SW_PARENTOPENING = 3
	SW_OTHERUNZOOM   = 4
)
View Source 
const (
	// Code Page Default Values.
	CP_ACP        = 0     // default to ANSI code page
	CP_OEMCP      = 1     // default to OEM  code page
	CP_MACCP      = 2     // default to MAC  code page
	CP_THREAD_ACP = 3     // current thread's ANSI code page
	CP_SYMBOL     = 42    // SYMBOL translations
	CP_UTF7       = 65000 // UTF-7 translation
	CP_UTF8       = 65001 // UTF-8 translation
)
View Source 
const (
	// Window Styles
	WS_OVERLAPPED   = 0
	WS_POPUP        = 0x80000000
	WS_CHILD        = 0x40000000
	WS_MINIMIZE     = 0x20000000
	WS_VISIBLE      = 0x10000000
	WS_DISABLED     = 0x8000000
	WS_CLIPSIBLINGS = 0x4000000
	WS_CLIPCHILDREN = 0x2000000
	WS_MAXIMIZE     = 0x1000000
	WS_CAPTION      = 0xC00000 // WS_BORDER or WS_DLGFRAME
	WS_BORDER       = 0x800000
	WS_DLGFRAME     = 0x400000
	WS_VSCROLL      = 0x200000
	WS_HSCROLL      = 0x100000
	WS_SYSMENU      = 0x80000
	WS_THICKFRAME   = 0x40000
	WS_GROUP        = 0x20000
	WS_TABSTOP      = 0x10000

	WS_MINIMIZEBOX = 0x20000
	WS_MAXIMIZEBOX = 0x10000

	WS_TILED   = WS_OVERLAPPED
	WS_ICONIC  = WS_MINIMIZE
	WS_SIZEBOX = WS_THICKFRAME

	// Common Window Styles
	WS_OVERLAPPEDWINDOW = WS_OVERLAPPED | WS_CAPTION | WS_SYSMENU | WS_THICKFRAME | WS_MINIMIZEBOX | WS_MAXIMIZEBOX
	WS_TILEDWINDOW      = WS_OVERLAPPEDWINDOW
	WS_POPUPWINDOW      = WS_POPUP | WS_BORDER | WS_SYSMENU
	WS_CHILDWINDOW      = WS_CHILD

	// Extended Window Styles
	WS_EX_DLGMODALFRAME  = 1
	WS_EX_NOPARENTNOTIFY = 4
	WS_EX_TOPMOST        = 8
	WS_EX_ACCEPTFILES    = 0x10
	WS_EX_TRANSPARENT    = 0x20
	WS_EX_MDICHILD       = 0x40
	WS_EX_TOOLWINDOW     = 0x80
	WS_EX_WINDOWEDGE     = 0x100
	WS_EX_CLIENTEDGE     = 0x200
	WS_EX_CONTEXTHELP    = 0x400

	WS_EX_RIGHT          = 0x1000
	WS_EX_LEFT           = 0
	WS_EX_RTLREADING     = 0x2000
	WS_EX_LTRREADING     = 0
	WS_EX_LEFTSCROLLBAR  = 0x4000
	WS_EX_RIGHTSCROLLBAR = 0

	WS_EX_CONTROLPARENT    = 0x10000
	WS_EX_STATICEDGE       = 0x20000
	WS_EX_APPWINDOW        = 0x40000
	WS_EX_OVERLAPPEDWINDOW = WS_EX_WINDOWEDGE | WS_EX_CLIENTEDGE
	WS_EX_PALETTEWINDOW    = WS_EX_WINDOWEDGE | WS_EX_TOOLWINDOW | WS_EX_TOPMOST

	WS_EX_LAYERED = 0x00080000

	WS_EX_NOINHERITLAYOUT = 0x00100000 // Disable inheritence of mirroring by children
	WS_EX_LAYOUTRTL       = 0x00400000 // Right to left mirroring
	WS_EX_COMPOSITED      = 0x02000000
	WS_EX_NOACTIVATE      = 0x08000000
)
View Source 
const (
	THREAD_BASE_PRIORITY_LOWRT = 15  // value that gets a thread to LowRealtime-1
	THREAD_BASE_PRIORITY_MAX   = 2   // maximum thread base priority boost
	THREAD_BASE_PRIORITY_MIN   = -2  // minimum thread base priority boost
	THREAD_BASE_PRIORITY_IDLE  = -15 // value that gets a thread to idle

	SYNCHRONIZE              = 0x00100000
	STANDARD_RIGHTS_REQUIRED = 0x000F0000
	EVENT_MODIFY_STATE       = 0x0002
	EVENT_ALL_ACCESS         = STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | 0x3
	MUTANT_QUERY_STATE       = 0x0001
	MUTANT_ALL_ACCESS        = STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | MUTANT_QUERY_STATE

	SEMAPHORE_MODIFY_STATE = 0x0002
	SEMAPHORE_ALL_ACCESS   = STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | 0x3

	PROCESS_TERMINATE         = 0x0001
	PROCESS_CREATE_THREAD     = 0x0002
	PROCESS_VM_OPERATION      = 0x0008
	PROCESS_VM_READ           = 0x0010
	PROCESS_VM_WRITE          = 0x0020
	PROCESS_DUP_HANDLE        = 0x0040
	PROCESS_CREATE_PROCESS    = 0x0080
	PROCESS_SET_QUOTA         = 0x0100
	PROCESS_SET_INFORMATION   = 0x0200
	PROCESS_QUERY_INFORMATION = 0x0400
	// if NTDDI_VERSION >= NTDDI_VISTA
	PROCESS_ALL_ACCESS = STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | 0xFFFF

	PROCESSOR_INTEL_386     = 386
	PROCESSOR_INTEL_486     = 486
	PROCESSOR_INTEL_PENTIUM = 586
	PROCESSOR_INTEL_IA64    = 2200
	PROCESSOR_AMD_X8664     = 8664
	PROCESSOR_MIPS_R4000    = 4000 // incl R4101 & R3910 for Windows CE
	PROCESSOR_ALPHA_21064   = 21064
	PROCESSOR_PPC_601       = 601
	PROCESSOR_PPC_603       = 603
	PROCESSOR_PPC_604       = 604
	PROCESSOR_PPC_620       = 620
	PROCESSOR_HITACHI_SH3   = 10003  // Windows CE
	PROCESSOR_HITACHI_SH3E  = 10004  // Windows CE
	PROCESSOR_HITACHI_SH4   = 10005  // Windows CE
	PROCESSOR_MOTOROLA_821  = 821    // Windows CE
	PROCESSOR_SHx_SH3       = 103    // Windows CE
	PROCESSOR_SHx_SH4       = 104    // Windows CE
	PROCESSOR_STRONGARM     = 2577   // Windows CE - 0xA11
	PROCESSOR_ARM720        = 1824   // Windows CE - 0x720
	PROCESSOR_ARM820        = 2080   // Windows CE - 0x820
	PROCESSOR_ARM920        = 2336   // Windows CE - 0x920
	PROCESSOR_ARM_7TDMI     = 70001  // Windows CE
	PROCESSOR_OPTIL         = 0x494F // MSIL

	PROCESSOR_ARCHITECTURE_INTEL         = 0
	PROCESSOR_ARCHITECTURE_MIPS          = 1
	PROCESSOR_ARCHITECTURE_ALPHA         = 2
	PROCESSOR_ARCHITECTURE_PPC           = 3
	PROCESSOR_ARCHITECTURE_SHX           = 4
	PROCESSOR_ARCHITECTURE_ARM           = 5
	PROCESSOR_ARCHITECTURE_IA64          = 6
	PROCESSOR_ARCHITECTURE_ALPHA64       = 7
	PROCESSOR_ARCHITECTURE_MSIL          = 8
	PROCESSOR_ARCHITECTURE_AMD64         = 9
	PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 = 10

	PROCESSOR_ARCHITECTURE_UNKNOWN = 0xFFFF
)
View Source 
const (
	TOKEN_ASSIGN_PRIMARY    = 0x0001
	TOKEN_DUPLICATE         = 0x0002
	TOKEN_IMPERSONATE       = 0x0004
	TOKEN_QUERY             = 0x0008
	TOKEN_QUERY_SOURCE      = 0x0010
	TOKEN_ADJUST_PRIVILEGES = 0x0020
	TOKEN_ADJUST_GROUPS     = 0x0040
	TOKEN_ADJUST_DEFAULT    = 0x0080
	TOKEN_ADJUST_SESSIONID  = 0x0100

	TOKEN_ALL_ACCESS_P = STANDARD_RIGHTS_REQUIRED | TOKEN_ASSIGN_PRIMARY |
		TOKEN_DUPLICATE | TOKEN_IMPERSONATE | TOKEN_QUERY |
		TOKEN_QUERY_SOURCE | TOKEN_ADJUST_PRIVILEGES | TOKEN_ADJUST_GROUPS |
		TOKEN_ADJUST_DEFAULT

	// if _WIN32_WINNT > 0x0400 || !defined(_WIN32_WINNT)
	TOKEN_ALL_ACCESS = TOKEN_ALL_ACCESS_P | TOKEN_ADJUST_SESSIONID

	TOKEN_READ    = STANDARD_RIGHTS_READ | TOKEN_QUERY
	TOKEN_WRITE   = STANDARD_RIGHTS_WRITE | TOKEN_ADJUST_PRIVILEGES | TOKEN_ADJUST_GROUPS | TOKEN_ADJUST_DEFAULT
	TOKEN_EXECUTE = STANDARD_RIGHTS_EXECUTE
)
View Source 
const (
	// constants for the biCompression field
	BI_RGB       = 0
	BI_RLE8      = 1
	BI_RLE4      = 2
	BI_BITFIELDS = 3

	// currentlly defined blend function
	AC_SRC_OVER  = 0x00
	AC_SRC_ALPHA = 0x01

	// alpha format flags
	AC_SRC_NO_PREMULT_ALPHA = 0x01
	AC_SRC_NO_ALPHA         = 0x02
	AC_DST_NO_PREMULT_ALPHA = 0x10
	AC_DST_NO_ALPHA         = 0x20

	LWA_COLORKEY = 0x00000001
	LWA_ALPHA    = 0x00000002
	ULW_COLORKEY = 0x00000001
	ULW_ALPHA    = 0x00000002
	ULW_OPAQUE   = 0x00000004
)
View Source 
const (
	//
	//  File System Notification flags
	//
	SHCNRF_InterruptLevel     = 0x00000001
	SHCNRF_ShellLevel         = 0x00000002
	SHCNRF_RecursiveInterrupt = 0x00001000
	SHCNRF_NewDelivery        = 0x00008000

	SHCNE_RENAMEITEM       = 0x00000001
	SHCNE_CREATE           = 0x00000002
	SHCNE_DELETE           = 0x00000004
	SHCNE_MKDIR            = 0x00000008
	SHCNE_RMDIR            = 0x00000010
	SHCNE_MEDIAINSERTED    = 0x00000020
	SHCNE_MEDIAREMOVED     = 0x00000040
	SHCNE_DRIVEREMOVED     = 0x00000080
	SHCNE_DRIVEADD         = 0x00000100
	SHCNE_NETSHARE         = 0x00000200
	SHCNE_NETUNSHARE       = 0x00000400
	SHCNE_ATTRIBUTES       = 0x00000800
	SHCNE_UPDATEDIR        = 0x00001000
	SHCNE_UPDATEITEM       = 0x00002000
	SHCNE_SERVERDISCONNECT = 0x00004000
	SHCNE_UPDATEIMAGE      = 0x00008000
	SHCNE_DRIVEADDGUI      = 0x00010000
	SHCNE_RENAMEFOLDER     = 0x00020000
	SHCNE_FREESPACE        = 0x00040000

	SHCNE_EXTENDED_EVENT         = 0x04000000
	SHCNE_EXTENDED_EVENT_PRE_IE4 = 0x00080000

	SHCNE_ASSOCCHANGED = 0x08000000

	SHCNE_DISKEVENTS   = 0x0002381F
	SHCNE_GLOBALEVENTS = 0x0C0581E0 // Events that dont match pidls first
	SHCNE_ALLEVENTS    = 0x7FFFFFFF
	SHCNE_INTERRUPT    = 0x80000000 // The presence of this flag indicates

	SHCNEE_ORDERCHANGED  = 0x00000002 // pidl2 is the changed folder
	SHCNEE_MSI_CHANGE    = 0x00000004 // pidl2 is a SHChangeProductKeyAsIDList
	SHCNEE_MSI_UNINSTALL = 0x00000005 // pidl2 is a SHChangeProductKeyAsIDList

	// Flags
	// uFlags & SHCNF_TYPE is an ID which indicates what dwItem1 and dwItem2 mean
	SHCNF_IDLIST      = 0x0000 // LPITEMIDLIST
	SHCNF_PATHA       = 0x0001 // path name
	SHCNF_PRINTERA    = 0x0002 // printer friendly name
	SHCNF_DWORD       = 0x0003 // DWORD
	SHCNF_PATHW       = 0x0005 // path name
	SHCNF_PRINTERW    = 0x0006 // printer friendly name
	SHCNF_TYPE        = 0x00FF
	SHCNF_FLUSH       = 0x1000
	SHCNF_FLUSHNOWAIT = 0x3000 // includes SHCNF_FLUSH

	SHCNF_NOTIFYRECURSIVE = 0x10000 // Notify clients registered for any child

)
View Source 
const (

	// The operation completed successfully.
	ERROR_SUCCESS = 0

	NO_ERROR = 0 // dderror

	// Incorrect function.
	ERROR_INVALID_FUNCTION = 1 // dderror

	// The system cannot find the file specified.
	ERROR_FILE_NOT_FOUND = 2

	// The system cannot find the path specified.
	ERROR_PATH_NOT_FOUND = 3

	// The system cannot open the file.
	ERROR_TOO_MANY_OPEN_FILES = 4

	// Access is denied.
	ERROR_ACCESS_DENIED = 5

	// The handle is invalid.
	ERROR_INVALID_HANDLE = 6

	// The storage control blocks were destroyed.
	ERROR_ARENA_TRASHED = 7

	// Not enough storage is available to process this command.
	ERROR_NOT_ENOUGH_MEMORY = 8 // dderror

	// The storage control block address is invalid.
	ERROR_INVALID_BLOCK = 9

	// The environment is incorrect.
	ERROR_BAD_ENVIRONMENT = 10

	// An attempt was made to load a program with an incorrect format.
	ERROR_BAD_FORMAT = 11

	// The access code is invalid.
	ERROR_INVALID_ACCESS = 12

	// The data is invalid.
	ERROR_INVALID_DATA = 13

	// Not enough storage is available to complete this operation.
	ERROR_OUTOFMEMORY = 14

	// The system cannot find the drive specified.
	ERROR_INVALID_DRIVE = 15

	// The directory cannot be removed.
	ERROR_CURRENT_DIRECTORY = 0x10

	// The system cannot move the file
	// to a different disk drive.
	ERROR_NOT_SAME_DEVICE = 17

	// There are no more files.
	ERROR_NO_MORE_FILES = 18

	// The media is write protected.
	ERROR_WRITE_PROTECT = 19

	// The system cannot find the device specified.
	ERROR_BAD_UNIT = 20

	// The device is not ready.
	ERROR_NOT_READY = 21

	// The device does not recognize the command.
	ERROR_BAD_COMMAND = 22

	// Data error (cyclic redundancy check)
	ERROR_CRC = 23

	// The program issued a command but the command length is incorrect.
	ERROR_BAD_LENGTH = 24

	// The drive cannot locate a specific area or track on the disk.
	ERROR_SEEK = 25

	// The specified disk or diskette cannot be accessed.
	ERROR_NOT_DOS_DISK = 26

	// The drive cannot find the sector requested.
	ERROR_SECTOR_NOT_FOUND = 27

	// The printer is out of paper.
	ERROR_OUT_OF_PAPER = 28

	// The system cannot write to the specified device.
	ERROR_WRITE_FAULT = 29

	// The system cannot read from the specified device.
	ERROR_READ_FAULT = 30

	// A device attached to the system is not functioning.
	ERROR_GEN_FAILURE = 31

	// The process cannot access the file because it is being used by another process.
	ERROR_SHARING_VIOLATION = 0x20

	// The process cannot access the file because
	// another process has locked a portion of the file.
	ERROR_LOCK_VIOLATION = 33

	// The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3)
	// into drive %1.
	ERROR_WRONG_DISK = 34

	// Too many files opened for sharing.
	ERROR_SHARING_BUFFER_EXCEEDED = 36

	// Reached end of file.
	ERROR_HANDLE_EOF = 38

	// The disk is full.
	ERROR_HANDLE_DISK_FULL = 39

	// The network request is not supported.
	ERROR_NOT_SUPPORTED = 50

	// The remote computer is not available.
	ERROR_REM_NOT_LIST = 51

	// A duplicate name exists on the network.
	ERROR_DUP_NAME = 52

	// The network path was not found.
	ERROR_BAD_NETPATH = 53

	// The network is busy.
	ERROR_NETWORK_BUSY = 54

	// The specified network resource or device is no longer
	// available.
	ERROR_DEV_NOT_EXIST = 55 // dderror

	// The network BIOS command limit has been reached.
	ERROR_TOO_MANY_CMDS = 56

	// A network adapter hardware error occurred.
	ERROR_ADAP_HDW_ERR = 57

	// The specified server cannot perform the requested
	// operation.
	ERROR_BAD_NET_RESP = 58

	// An unexpected network error occurred.
	ERROR_UNEXP_NET_ERR = 59

	// The remote adapter is not compatible.
	ERROR_BAD_REM_ADAP = 60

	// The printer queue is full.
	ERROR_PRINTQ_FULL = 61

	// Space to store the file waiting to be printed is
	// not available on the server.
	ERROR_NO_SPOOL_SPACE = 62

	// Your file waiting to be printed was deleted.
	ERROR_PRINT_CANCELLED = 63

	// The specified network name is no longer available.
	ERROR_NETNAME_DELETED = 0x40

	// Network access is denied.
	ERROR_NETWORK_ACCESS_DENIED = 65

	// The network resource type is not correct.
	ERROR_BAD_DEV_TYPE = 66

	// The network name cannot be found.
	ERROR_BAD_NET_NAME = 67

	// The name limit for the local computer network
	// adapter card was exceeded.
	ERROR_TOO_MANY_NAMES = 68

	// The network BIOS session limit was exceeded.
	ERROR_TOO_MANY_SESS = 69

	// The remote server has been paused or is in the
	// process of being started.
	ERROR_SHARING_PAUSED = 70

	// No more connections can be made to this remote computer at this time
	// because there are already as many connections as the computer can accept.
	ERROR_REQ_NOT_ACCEP = 71

	// The specified printer or disk device has been paused.
	ERROR_REDIR_PAUSED = 72

	// The file exists.
	ERROR_FILE_EXISTS = 80

	// The directory or file cannot be created.
	ERROR_CANNOT_MAKE = 82

	// Fail on INT 24
	ERROR_FAIL_I24 = 83

	// Storage to process this request is not available.
	ERROR_OUT_OF_STRUCTURES = 84

	// The local device name is already in use.
	ERROR_ALREADY_ASSIGNED = 85

	// The specified network password is not correct.
	ERROR_INVALID_PASSWORD = 86

	// The parameter is incorrect.
	ERROR_INVALID_PARAMETER = 87 // dderror

	// A write fault occurred on the network.
	ERROR_NET_WRITE_FAULT = 88

	// The system cannot start another process at
	// this time.
	ERROR_NO_PROC_SLOTS = 89

	// Cannot create another system semaphore.
	ERROR_TOO_MANY_SEMAPHORES = 100

	// The exclusive semaphore is owned by another process.
	ERROR_EXCL_SEM_ALREADY_OWNED = 101

	// The semaphore is set and cannot be closed.
	ERROR_SEM_IS_SET = 102

	// The semaphore cannot be set again.
	ERROR_TOO_MANY_SEM_REQUESTS = 103

	// Cannot request exclusive semaphores at interrupt time.
	ERROR_INVALID_AT_INTERRUPT_TIME = 104

	// The previous ownership of this semaphore has ended.
	ERROR_SEM_OWNER_DIED = 105

	// Insert the diskette for drive %1.
	ERROR_SEM_USER_LIMIT = 106

	// Program stopped because alternate diskette was not inserted.
	ERROR_DISK_CHANGE = 107

	// The disk is in use or locked by
	// another process.
	ERROR_DRIVE_LOCKED = 108

	// The pipe has been ended.
	ERROR_BROKEN_PIPE = 109

	// The system cannot open the device or file specified.
	ERROR_OPEN_FAILED = 110

	// The file name is too long.
	ERROR_BUFFER_OVERFLOW = 111

	// There is not enough space on the disk.
	ERROR_DISK_FULL = 112

	// No more internal file identifiers available.
	ERROR_NO_MORE_SEARCH_HANDLES = 113

	// The target internal file identifier is incorrect.
	ERROR_INVALID_TARGET_HANDLE = 114

	// The IOCTL call made by the application program is not correct.
	ERROR_INVALID_CATEGORY = 117

	// The verify-on-write switch parameter value is not correct.
	ERROR_INVALID_VERIFY_SWITCH = 118

	// The system does not support the command requested.
	ERROR_BAD_DRIVER_LEVEL = 119

	// This function is only valid in Windows NT mode.
	ERROR_CALL_NOT_IMPLEMENTED = 120

	// The semaphore timeout period has expired.
	ERROR_SEM_TIMEOUT = 121

	// The data area passed to a system call is too small.
	ERROR_INSUFFICIENT_BUFFER = 122 // dderror

	// The filename, directory name, or volume label syntax is incorrect.
	ERROR_INVALID_NAME = 123

	// The system call level is not correct.
	ERROR_INVALID_LEVEL = 124

	// The disk has no volume label.
	ERROR_NO_VOLUME_LABEL = 125

	// The specified module could not be found.
	ERROR_MOD_NOT_FOUND = 126

	// The specified procedure could not be found.
	ERROR_PROC_NOT_FOUND = 127

	// There are no child processes to wait for.
	ERROR_WAIT_NO_CHILDREN = 0x80

	// The %1 application cannot be run in Windows NT mode.
	ERROR_CHILD_NOT_COMPLETE = 129

	// Attempt to use a file handle to an open disk partition for an
	// operation other than raw disk I/O.
	ERROR_DIRECT_ACCESS_HANDLE = 130

	// An attempt was made to move the file pointer before the beginning of the file.
	ERROR_NEGATIVE_SEEK = 131

	// The file pointer cannot be set on the specified device or file.
	ERROR_SEEK_ON_DEVICE = 132

	// A JOIN or SUBST command
	// cannot be used for a drive that
	// contains previously joined drives.
	ERROR_IS_JOIN_TARGET = 133

	// An attempt was made to use a
	// JOIN or SUBST command on a drive that has
	// already been joined.
	ERROR_IS_JOINED = 134

	// An attempt was made to use a
	// JOIN or SUBST command on a drive that has
	// already been substituted.
	ERROR_IS_SUBSTED = 135

	// The system tried to delete
	// the JOIN of a drive that is not joined.
	ERROR_NOT_JOINED = 136

	// The system tried to delete the
	// substitution of a drive that is not substituted.
	ERROR_NOT_SUBSTED = 137

	// The system tried to join a drive to a directory on a joined drive.
	ERROR_JOIN_TO_JOIN = 138

	// The system tried to substitute a drive to a directory on a substituted drive.
	ERROR_SUBST_TO_SUBST = 139

	// The system tried to join a drive to a directory on a substituted drive.
	ERROR_JOIN_TO_SUBST = 140

	// The system tried to SUBST a drive to a directory on a joined drive.
	ERROR_SUBST_TO_JOIN = 141

	// The system cannot perform a JOIN or SUBST at this time.
	ERROR_BUSY_DRIVE = 142

	// The system cannot join or substitute a
	// drive to or for a directory on the same drive.
	ERROR_SAME_DRIVE = 143

	// The directory is not a subdirectory of the root directory.
	ERROR_DIR_NOT_ROOT = 144

	// The directory is not empty.
	ERROR_DIR_NOT_EMPTY = 145

	// The path specified is being used in a substitute.
	ERROR_IS_SUBST_PATH = 146

	// Not enough resources are available to process this command.
	ERROR_IS_JOIN_PATH = 147

	// The path specified cannot be used at this time.
	ERROR_PATH_BUSY = 148

	// An attempt was made to join or substitute a drive for which a directory
	// on the drive is the target of a previous substitute.
	ERROR_IS_SUBST_TARGET = 149

	// System trace information was not specified in your
	// CONFIG.SYS file, or tracing is disallowed.
	ERROR_SYSTEM_TRACE = 150

	// The number of specified semaphore events for
	// DosMuxSemWait is not correct.
	ERROR_INVALID_EVENT_COUNT = 151

	// DosMuxSemWait did not execute; too many semaphores
	// are already set.
	ERROR_TOO_MANY_MUXWAITERS = 152

	// The DosMuxSemWait list is not correct.
	ERROR_INVALID_LIST_FORMAT = 153

	//  The volume label you entered exceeds the label character
	//  limit of the target file system.
	ERROR_LABEL_TOO_LONG = 154

	// Cannot create another thread.
	ERROR_TOO_MANY_TCBS = 155

	// The recipient process has refused the signal.
	ERROR_SIGNAL_REFUSED = 156

	// The segment is already discarded and cannot be locked.
	ERROR_DISCARDED = 157

	// The segment is already unlocked.
	ERROR_NOT_LOCKED = 158

	// The address for the thread ID is not correct.
	ERROR_BAD_THREADID_ADDR = 159

	// The argument string passed to DosExecPgm is not correct.
	ERROR_BAD_ARGUMENTS = 160

	// The specified path is invalid.
	ERROR_BAD_PATHNAME = 161

	// A signal is already pending.
	ERROR_SIGNAL_PENDING = 162

	// No more threads can be created in the system.
	ERROR_MAX_THRDS_REACHED = 164

	// Unable to lock a region of a file.
	ERROR_LOCK_FAILED = 167

	// The requested resource is in use.
	ERROR_BUSY = 170

	// A lock request was not outstanding for the supplied cancel region.
	ERROR_CANCEL_VIOLATION = 173

	// The file system does not support atomic changes to the lock type.
	ERROR_ATOMIC_LOCKS_NOT_SUPPORTED = 174

	// The system detected a segment number that was not correct.
	ERROR_INVALID_SEGMENT_NUMBER = 180

	// The operating system cannot run %1.
	ERROR_INVALID_ORDINAL = 182

	// Cannot create a file when that file already exists.
	ERROR_ALREADY_EXISTS = 183

	// The flag passed is not correct.
	ERROR_INVALID_FLAG_NUMBER = 186

	// The specified system semaphore name was not found.
	ERROR_SEM_NOT_FOUND = 187

	// The operating system cannot run %1.
	ERROR_INVALID_STARTING_CODESEG = 188

	// The operating system cannot run %1.
	ERROR_INVALID_STACKSEG = 189

	// The operating system cannot run %1.
	ERROR_INVALID_MODULETYPE = 190

	// Cannot run %1 in Windows NT mode.
	ERROR_INVALID_EXE_SIGNATURE = 191

	// The operating system cannot run %1.
	ERROR_EXE_MARKED_INVALID = 192

	// %1 is not a valid Windows NT application.
	ERROR_BAD_EXE_FORMAT = 193

	// The operating system cannot run %1.
	ERROR_ITERATED_DATA_EXCEEDS_64k = 194

	// The operating system cannot run %1.
	ERROR_INVALID_MINALLOCSIZE = 195

	// The operating system cannot run this application program.
	ERROR_DYNLINK_FROM_INVALID_RING = 196

	// The operating system is not presently configured to run this application.
	ERROR_IOPL_NOT_ENABLED = 197

	// The operating system cannot run %1.
	ERROR_INVALID_SEGDPL = 198

	// The operating system cannot run this
	// application program.
	ERROR_AUTODATASEG_EXCEEDS_64k = 199

	// The code segment cannot be greater than or equal to 64KB.
	ERROR_RING2SEG_MUST_BE_MOVABLE = 200

	// The operating system cannot run %1.
	ERROR_RELOC_CHAIN_XEEDS_SEGLIM = 201

	// The operating system cannot run %1.
	ERROR_INFLOOP_IN_RELOC_CHAIN = 202

	// The system could not find the environment option that was entered.
	ERROR_ENVVAR_NOT_FOUND = 203

	// No process in the command subtree has a signal handler.
	ERROR_NO_SIGNAL_SENT = 205

	// The filename or extension is too long.
	ERROR_FILENAME_EXCED_RANGE = 206

	// The ring 2 stack is in use.
	ERROR_RING2_STACK_IN_USE = 207

	// The global filename characters, * or ?, are entered
	// incorrectly or too many global filename characters are specified.
	ERROR_META_EXPANSION_TOO_LONG = 208

	// The signal being posted is not correct.
	ERROR_INVALID_SIGNAL_NUMBER = 209

	// The signal handler cannot be set.
	ERROR_THREAD_1_INACTIVE = 210

	// The segment is locked and cannot be reallocated.
	ERROR_LOCKED = 212

	// Too many dynamic link modules are attached to this
	// program or dynamic link module.
	ERROR_TOO_MANY_MODULES = 214

	// Can't nest calls to LoadModule.
	ERROR_NESTING_NOT_ALLOWED = 215

	//  The image file %1 is valid, but is for a machine type other
	//  than the current machine.
	ERROR_EXE_MACHINE_TYPE_MISMATCH = 216

	// The pipe state is invalid.
	ERROR_BAD_PIPE = 230

	// All pipe instances are busy.
	ERROR_PIPE_BUSY = 231

	// The pipe is being closed.
	ERROR_NO_DATA = 232

	// No process is on the other end of the pipe.
	ERROR_PIPE_NOT_CONNECTED = 233

	// More data is available.
	ERROR_MORE_DATA = 234 // dderror

	// The session was cancelled.
	ERROR_VC_DISCONNECTED = 240

	// The specified extended attribute name was invalid.
	ERROR_INVALID_EA_NAME = 254

	// The extended attributes are inconsistent.
	ERROR_EA_LIST_INCONSISTENT = 255

	// No more data is available.
	ERROR_NO_MORE_ITEMS = 259

	// The Copy API cannot be used.
	ERROR_CANNOT_COPY = 266

	// The directory name is invalid.
	ERROR_DIRECTORY = 267

	// The extended attributes did not fit in the buffer.
	ERROR_EAS_DIDNT_FIT = 275

	// The extended attribute file on the mounted file system is corrupt.
	ERROR_EA_FILE_CORRUPT = 276

	// The extended attribute table file is full.
	ERROR_EA_TABLE_FULL = 277

	// The specified extended attribute handle is invalid.
	ERROR_INVALID_EA_HANDLE = 278

	// The mounted file system does not support extended attributes.
	ERROR_EAS_NOT_SUPPORTED = 282

	// Attempt to release mutex not owned by caller.
	ERROR_NOT_OWNER = 288

	// Too many posts were made to a semaphore.
	ERROR_TOO_MANY_POSTS = 298

	// Only part of a Read/WriteProcessMemory request was completed.
	ERROR_PARTIAL_COPY = 299

	// The system cannot find message for message number $%1
	// in message file for %2.
	ERROR_MR_MID_NOT_FOUND = 317

	// Attempt to access invalid address.
	ERROR_INVALID_ADDRESS = 487

	// Arithmetic result exceeded 32 bits.
	ERROR_ARITHMETIC_OVERFLOW = 534

	// There is a process on other end of the pipe.
	ERROR_PIPE_CONNECTED = 535

	// Waiting for a process to open the other end of the pipe.
	ERROR_PIPE_LISTENING = 536

	// Access to the extended attribute was denied.
	ERROR_EA_ACCESS_DENIED = 994

	// The I/O operation has been aborted because of either a thread exit
	// or an application request.
	ERROR_OPERATION_ABORTED = 995

	// Overlapped I/O event is not in a signalled state.
	ERROR_IO_INCOMPLETE = 996

	// Overlapped I/O operation is in progress.
	ERROR_IO_PENDING = 997 // dderror

	// Invalid access to memory location.
	ERROR_NOACCESS = 998

	// Error performing inpage operation.
	ERROR_SWAPERROR = 999

	// Recursion too deep, stack overflowed.
	ERROR_STACK_OVERFLOW = 1001

	// The window cannot act on the sent message.
	ERROR_INVALID_MESSAGE = 1002

	// Cannot complete this function.
	ERROR_CAN_NOT_COMPLETE = 1003

	// Invalid flags.
	ERROR_INVALID_FLAGS = 1004

	// The volume does not contain a recognized file system.
	// Please make sure that all required file system drivers are loaded and that the
	// volume is not corrupt.
	ERROR_UNRECOGNIZED_VOLUME = 1005

	// The volume for a file has been externally altered such that the
	// opened file is no longer valid.
	ERROR_FILE_INVALID = 1006

	// The requested operation cannot be performed in full-screen mode.
	ERROR_FULLSCREEN_MODE = 1007

	// An attempt was made to reference a token that does not exist.
	ERROR_NO_TOKEN = 1008

	// The configuration registry database is corrupt.
	ERROR_BADDB = 1009

	// The configuration registry key is invalid.
	ERROR_BADKEY = 1010

	// The configuration registry key could not be opened.
	ERROR_CANTOPEN = 1011

	// The configuration registry key could not be read.
	ERROR_CANTREAD = 1012

	// The configuration registry key could not be written.
	ERROR_CANTWRITE = 1013

	// One of the files in the Registry database had to be recovered
	// by use of a log or alternate copy.  The recovery was successful.
	ERROR_REGISTRY_RECOVERED = 1014

	// The Registry is corrupt. The structure of one of the files that contains
	// Registry data is corrupt, or the system's image of the file in memory
	// is corrupt, or the file could not be recovered because the alternate
	// copy or log was absent or corrupt.
	ERROR_REGISTRY_CORRUPT = 1015

	// An I/O operation initiated by the Registry failed unrecoverably.
	// The Registry could not read in, or write out, or flush, one of the files
	// that contain the system's image of the Registry.
	ERROR_REGISTRY_IO_FAILED = 1016

	// The system has attempted to load or restore a file into the Registry, but the
	// specified file is not in a Registry file format.
	ERROR_NOT_REGISTRY_FILE = 1017

	// Illegal operation attempted on a Registry key which has been marked for deletion.
	ERROR_KEY_DELETED = 1018

	// System could not allocate the required space in a Registry log.
	ERROR_NO_LOG_SPACE = 1019

	// Cannot create a symbolic link in a Registry key that already
	// has subkeys or values.
	ERROR_KEY_HAS_CHILDREN = 1020

	// Cannot create a stable subkey under a volatile parent key.
	ERROR_CHILD_MUST_BE_VOLATILE = 1021

	// A notify change request is being completed and the information
	// is not being returned in the caller's buffer. The caller now
	// needs to enumerate the files to find the changes.
	ERROR_NOTIFY_ENUM_DIR = 1022

	// A stop control has been sent to a service which other running services
	// are dependent on.
	ERROR_DEPENDENT_SERVICES_RUNNING = 1051

	// The requested control is not valid for this service
	ERROR_INVALID_SERVICE_CONTROL = 1052

	// The service did not respond to the start or control request in a timely
	// fashion.
	ERROR_SERVICE_REQUEST_TIMEOUT = 1053

	// A thread could not be created for the service.
	ERROR_SERVICE_NO_THREAD = 1054

	// The service database is locked.
	ERROR_SERVICE_DATABASE_LOCKED = 1055

	// An instance of the service is already running.
	ERROR_SERVICE_ALREADY_RUNNING = 1056

	// The account name is invalid or does not exist.
	ERROR_INVALID_SERVICE_ACCOUNT = 1057

	// The specified service is disabled and cannot be started.
	ERROR_SERVICE_DISABLED = 1058

	// Circular service dependency was specified.
	ERROR_CIRCULAR_DEPENDENCY = 1059

	// The specified service does not exist as an installed service.
	ERROR_SERVICE_DOES_NOT_EXIST = 1060

	// The service cannot accept control messages at this time.
	ERROR_SERVICE_CANNOT_ACCEPT_CTRL = 1061

	// The service has not been started.
	ERROR_SERVICE_NOT_ACTIVE = 1062

	// The service process could not connect to the service controller.
	ERROR_FAILED_SERVICE_CONTROLLER_ = 1063

	// An exception occurred in the service when handling the control request.
	ERROR_EXCEPTION_IN_SERVICE = 1064

	// The database specified does not exist.
	ERROR_DATABASE_DOES_NOT_EXIST = 1065

	// The service has returned a service-specific error code.
	ERROR_SERVICE_SPECIFIC_ERROR = 1066

	// The process terminated unexpectedly.
	ERROR_PROCESS_ABORTED = 1067

	// The dependency service or group failed to start.
	ERROR_SERVICE_DEPENDENCY_FAIL = 1068

	// The service did not start due to a logon failure.
	ERROR_SERVICE_LOGON_FAILED = 1069

	// After starting, the service hung in a start-pending state.
	ERROR_SERVICE_START_HANG = 1070

	// The specified service database lock is invalid.
	ERROR_INVALID_SERVICE_LOCK = 1071

	// The specified service has been marked for deletion.
	ERROR_SERVICE_MARKED_FOR_DELETE = 1072

	// The specified service already exists.
	ERROR_SERVICE_EXISTS = 1073

	// The system is currently running with the last-known-good configuration.
	ERROR_ALREADY_RUNNING_LKG = 1074

	// The dependency service does not exist or has been marked for
	// deletion.
	ERROR_SERVICE_DEPENDENCY_DELETED = 1075

	// The current boot has already been accepted for use as the
	// last-known-good control set.
	ERROR_BOOT_ALREADY_ACCEPTED = 1076

	// No attempts to start the service have been made since the last boot.
	ERROR_SERVICE_NEVER_STARTED = 1077

	// The name is already in use as either a service name or a service display
	// name.
	ERROR_DUPLICATE_SERVICE_NAME = 1078

	//  The account specified for this service is different from the account
	//  specified for other services running in the same process.
	ERROR_DIFFERENT_SERVICE_ACCOUNT = 1079

	// The physical end of the tape has been reached.
	ERROR_END_OF_MEDIA = 1100

	// A tape access reached a filemark.
	ERROR_FILEMARK_DETECTED = 1101

	// Beginning of tape or partition was encountered.
	ERROR_BEGINNING_OF_MEDIA = 1102

	// A tape access reached the end of a set of files.
	ERROR_SETMARK_DETECTED = 1103

	// No more data is on the tape.
	ERROR_NO_DATA_DETECTED = 1104

	// Tape could not be partitioned.
	ERROR_PARTITION_FAILURE = 1105

	// When accessing a new tape of a multivolume partition, the current
	// blocksize is incorrect.
	ERROR_INVALID_BLOCK_LENGTH = 1106

	// Tape partition information could not be found when loading a tape.
	ERROR_DEVICE_NOT_PARTITIONED = 1107

	// Unable to lock the media eject mechanism.
	ERROR_UNABLE_TO_LOCK_MEDIA = 1108

	// Unable to unload the media.
	ERROR_UNABLE_TO_UNLOAD_MEDIA = 1109

	// Media in drive may have changed.
	ERROR_MEDIA_CHANGED = 1110

	// The I/O bus was reset.
	ERROR_BUS_RESET = 1111

	// No media in drive.
	ERROR_NO_MEDIA_IN_DRIVE = 1112

	// No mapping for the Unicode character exists in the target multi-byte code page.
	ERROR_NO_UNICODE_TRANSLATION = 1113

	// A dynamic link library (DLL) initialization routine failed.
	ERROR_DLL_INIT_FAILED = 1114

	// A system shutdown is in progress.
	ERROR_SHUTDOWN_IN_PROGRESS = 1115

	// Unable to abort the system shutdown because no shutdown was in progress.
	ERROR_NO_SHUTDOWN_IN_PROGRESS = 1116

	// The request could not be performed because of an I/O device error.
	ERROR_IO_DEVICE = 1117

	// No serial device was successfully initialized.  The serial driver will unload.
	ERROR_SERIAL_NO_DEVICE = 1118

	// Unable to open a device that was sharing an interrupt request (IRQ)
	// with other devices. At least one other device that uses that IRQ
	// was already opened.
	ERROR_IRQ_BUSY = 1119

	// A serial I/O operation was completed by another write to the serial port.
	// (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
	ERROR_MORE_WRITES = 1120

	// A serial I/O operation completed because the time-out period expired.
	// (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
	ERROR_COUNTER_TIMEOUT = 1121

	// No ID address mark was found on the floppy disk.
	ERROR_FLOPPY_ID_MARK_NOT_FOUND = 1122

	// Mismatch between the floppy disk sector ID field and the floppy disk
	// controller track address.
	ERROR_FLOPPY_WRONG_CYLINDER = 1123

	// The floppy disk controller reported an error that is not recognized
	// by the floppy disk driver.
	ERROR_FLOPPY_UNKNOWN_ERROR = 1124

	// The floppy disk controller returned inconsistent results in its registers.
	ERROR_FLOPPY_BAD_REGISTERS = 1125

	// While accessing the hard disk, a recalibrate operation failed, even after retries.
	ERROR_DISK_RECALIBRATE_FAILED = 1126

	// While accessing the hard disk, a disk operation failed even after retries.
	ERROR_DISK_OPERATION_FAILED = 1127

	// While accessing the hard disk, a disk controller reset was needed, but
	// even that failed.
	ERROR_DISK_RESET_FAILED = 1128

	// Physical end of tape encountered.
	ERROR_EOM_OVERFLOW = 1129

	// Not enough server storage is available to process this command.
	ERROR_NOT_ENOUGH_SERVER_MEMORY = 1130

	// A potential deadlock condition has been detected.
	ERROR_POSSIBLE_DEADLOCK = 1131

	// The base address or the file offset specified does not have the proper
	// alignment.
	ERROR_MAPPED_ALIGNMENT = 1132

	// An attempt to change the system power state was vetoed by another
	// application or driver.
	ERROR_SET_POWER_STATE_VETOED = 1140

	// The system BIOS failed an attempt to change the system power state.
	ERROR_SET_POWER_STATE_FAILED = 1141

	//  An attempt was made to create more links on a file than
	//  the file system supports.
	ERROR_TOO_MANY_LINKS = 1142

	// The specified program requires a newer version of Windows.
	ERROR_OLD_WIN_VERSION = 1150

	// The specified program is not a Windows or MS-DOS program.
	ERROR_APP_WRONG_OS = 1151

	// Cannot start more than one instance of the specified program.
	ERROR_SINGLE_INSTANCE_APP = 1152

	//  The specified program was written for an older version of Windows.
	ERROR_RMODE_APP = 1153

	// One of the library files needed to run this application is damaged.
	ERROR_INVALID_DLL = 1154

	// No application is associated with the specified file for this operation.
	ERROR_NO_ASSOCIATION = 1155

	// An error occurred in sending the command to the application.
	ERROR_DDE_FAIL = 1156

	// One of the library files needed to run this application cannot be found.
	ERROR_DLL_NOT_FOUND = 1157

	// Winnet32 Status Codes
	// The specified username is invalid.
	ERROR_BAD_USERNAME = 2202

	// This network connection does not exist.
	ERROR_NOT_CONNECTED = 2250

	// This network connection has files open or requests pending.
	ERROR_OPEN_FILES = 2401

	// Active connections still exist.
	ERROR_ACTIVE_CONNECTIONS = 2402

	// The device is in use by an active process and cannot be disconnected.
	ERROR_DEVICE_IN_USE = 2404

	// The specified device name is invalid.
	ERROR_BAD_DEVICE = 1200

	// The device is not currently connected but it is a remembered connection.
	ERROR_CONNECTION_UNAVAIL = 1201

	// An attempt was made to remember a device that had previously been remembered.
	ERROR_DEVICE_ALREADY_REMEMBERED = 1202

	// No network provider accepted the given network path.
	ERROR_NO_NET_OR_BAD_PATH = 1203

	// The specified network provider name is invalid.
	ERROR_BAD_PROVIDER = 1204

	// Unable to open the network connection profile.
	ERROR_CANNOT_OPEN_PROFILE = 1205

	// The network connection profile is corrupt.
	ERROR_BAD_PROFILE = 1206

	// Cannot enumerate a non-container.
	ERROR_NOT_CONTAINER = 1207

	// An extended error has occurred.
	ERROR_EXTENDED_ERROR = 1208

	// The format of the specified group name is invalid.
	ERROR_INVALID_GROUPNAME = 1209

	// The format of the specified computer name is invalid.
	ERROR_INVALID_COMPUTERNAME = 1210

	// The format of the specified event name is invalid.
	ERROR_INVALID_EVENTNAME = 1211

	// The format of the specified domain name is invalid.
	ERROR_INVALID_DOMAINNAME = 1212

	// The format of the specified service name is invalid.
	ERROR_INVALID_SERVICENAME = 1213

	// The format of the specified network name is invalid.
	ERROR_INVALID_NETNAME = 1214

	// The format of the specified share name is invalid.
	ERROR_INVALID_SHARENAME = 1215

	// The format of the specified password is invalid.
	ERROR_INVALID_PASSWORDNAME = 1216

	// The format of the specified message name is invalid.
	ERROR_INVALID_MESSAGENAME = 1217

	// The format of the specified message destination is invalid.
	ERROR_INVALID_MESSAGEDEST = 1218

	// The credentials supplied conflict with an existing set of credentials.
	ERROR_SESSION_CREDENTIAL_CONFLICT = 1219

	// An attempt was made to establish a session to a network server, but there
	// are already too many sessions established to that server.
	ERROR_REMOTE_SESSION_LIMIT_EXCEEDED = 1220

	// The workgroup or domain name is already in use by another computer on the
	// network.
	ERROR_DUP_DOMAINNAME = 1221

	// The network is not present or not started.
	ERROR_NO_NETWORK = 1222

	// The operation was cancelled by the user.
	ERROR_CANCELLED = 1223

	// The requested operation cannot be performed on a file with a user mapped section open.
	ERROR_USER_MAPPED_FILE = 1224

	// The remote system refused the network connection.
	ERROR_CONNECTION_REFUSED = 1225

	// The network connection was gracefully closed.
	ERROR_GRACEFUL_DISCONNECT = 1226

	// The network transport endpoint already has an address associated with it.
	ERROR_ADDRESS_ALREADY_ASSOCIATED = 1227

	// An address has not yet been associated with the network endpoint.
	ERROR_ADDRESS_NOT_ASSOCIATED = 1228

	// An operation was attempted on a non-existent network connection.
	ERROR_CONNECTION_INVALID = 1229

	// An invalid operation was attempted on an active network connection.
	ERROR_CONNECTION_ACTIVE = 1230

	// The remote network is not reachable by the transport.
	ERROR_NETWORK_UNREACHABLE = 1231

	// The remote system is not reachable by the transport.
	ERROR_HOST_UNREACHABLE = 1232

	// The remote system does not support the transport protocol.
	ERROR_PROTOCOL_UNREACHABLE = 1233

	// No service is operating at the destination network endpoint
	// on the remote system.
	ERROR_PORT_UNREACHABLE = 1234

	// The request was aborted.
	ERROR_REQUEST_ABORTED = 1235

	// The network connection was aborted by the local system.
	ERROR_CONNECTION_ABORTED = 1236

	// The operation could not be completed.  A retry should be performed.
	ERROR_RETRY = 1237

	// A connection to the server could not be made because the limit on the number of
	// concurrent connections for this account has been reached.
	ERROR_CONNECTION_COUNT_LIMIT = 1238

	// Attempting to login during an unauthorized time of day for this account.
	ERROR_LOGIN_TIME_RESTRICTION = 1239

	// The account is not authorized to login from this station.
	ERROR_LOGIN_WKSTA_RESTRICTION = 1240

	// The network address could not be used for the operation requested.
	ERROR_INCORRECT_ADDRESS = 1241

	// The service is already registered.
	ERROR_ALREADY_REGISTERED = 1242

	// The specified service does not exist.
	ERROR_SERVICE_NOT_FOUND = 1243

	// The operation being requested was not performed because the user
	// has not been authenticated.
	ERROR_NOT_AUTHENTICATED = 1244

	// The operation being requested was not performed because the user
	// has not logged on to the network.
	// The specified service does not exist.
	ERROR_NOT_LOGGED_ON = 1245

	// Return that wants caller to continue with work in progress.
	ERROR_CONTINUE = 1246

	// An attempt was made to perform an initialization operation when
	// initialization has already been completed.
	ERROR_ALREADY_INITIALIZED = 1247

	// No more local devices.
	ERROR_NO_MORE_DEVICES = 1248

	// Security Status Codes
	// Not all privileges referenced are assigned to the caller.
	ERROR_NOT_ALL_ASSIGNED = 1300

	// Some mapping between account names and security IDs was not done.
	ERROR_SOME_NOT_MAPPED = 1301

	// No system quota limits are specifically set for this account.
	ERROR_NO_QUOTAS_FOR_ACCOUNT = 1302

	// No encryption key is available.  A well-known encryption key was returned.
	ERROR_LOCAL_USER_SESSION_KEY = 1303

	// The NT password is too complex to be converted to a LAN Manager
	// password.  The LAN Manager password returned is a NULL string.
	ERROR_NULL_LM_PASSWORD = 1304

	// The revision level is unknown.
	ERROR_UNKNOWN_REVISION = 1305

	// Indicates two revision levels are incompatible.
	ERROR_REVISION_MISMATCH = 1306

	// This security ID may not be assigned as the owner of this object.
	ERROR_INVALID_OWNER = 1307

	// This security ID may not be assigned as the primary group of an object.
	ERROR_INVALID_PRIMARY_GROUP = 1308

	// An attempt has been made to operate on an impersonation token
	// by a thread that is not currently impersonating a client.
	ERROR_NO_IMPERSONATION_TOKEN = 1309

	// The group may not be disabled.
	ERROR_CANT_DISABLE_MANDATORY = 1310

	// There are currently no logon servers available to service the logon
	// request.
	ERROR_NO_LOGON_SERVERS = 1311

	//  A specified logon session does not exist.  It may already have
	//  been terminated.
	ERROR_NO_SUCH_LOGON_SESSION = 1312

	//  A specified privilege does not exist.
	ERROR_NO_SUCH_PRIVILEGE = 1313

	//  A required privilege is not held by the client.
	ERROR_PRIVILEGE_NOT_HELD = 1314

	// The name provided is not a properly formed account name.
	ERROR_INVALID_ACCOUNT_NAME = 1315

	// The specified user already exists.
	ERROR_USER_EXISTS = 1316

	// The specified user does not exist.
	ERROR_NO_SUCH_USER = 1317

	// The specified group already exists.
	ERROR_GROUP_EXISTS = 1318

	// The specified group does not exist.
	ERROR_NO_SUCH_GROUP = 1319

	// Either the specified user account is already a member of the specified
	// group, or the specified group cannot be deleted because it contains
	// a member.
	ERROR_MEMBER_IN_GROUP = 1320

	// The specified user account is not a member of the specified group account.
	ERROR_MEMBER_NOT_IN_GROUP = 1321

	// The last remaining administration account cannot be disabled
	// or deleted.
	ERROR_LAST_ADMIN = 1322

	// Unable to update the password.  The value provided as the current
	// password is incorrect.
	ERROR_WRONG_PASSWORD = 1323

	// Unable to update the password.  The value provided for the new password
	// contains values that are not allowed in passwords.
	ERROR_ILL_FORMED_PASSWORD = 1324

	// Unable to update the password because a password update rule has been
	// violated.
	ERROR_PASSWORD_RESTRICTION = 1325

	// Logon failure: unknown user name or bad password.
	ERROR_LOGON_FAILURE = 1326

	// Logon failure: user account restriction.
	ERROR_ACCOUNT_RESTRICTION = 1327

	// Logon failure: account logon time restriction violation.
	ERROR_INVALID_LOGON_HOURS = 1328

	// Logon failure: user not allowed to log on to this computer.
	ERROR_INVALID_WORKSTATION = 1329

	// Logon failure: the specified account password has expired.
	ERROR_PASSWORD_EXPIRED = 1330

	// Logon failure: account currently disabled.
	ERROR_ACCOUNT_DISABLED = 1331

	// No mapping between account names and security IDs was done.
	ERROR_NONE_MAPPED = 1332

	// Too many local user identifiers (LUIDs) were requested at one time.
	ERROR_TOO_MANY_LUIDS_REQUESTED = 1333

	// No more local user identifiers (LUIDs) are available.
	ERROR_LUIDS_EXHAUSTED = 1334

	// The subauthority part of a security ID is invalid for this particular use.
	ERROR_INVALID_SUB_AUTHORITY = 1335

	// The access control list (ACL) structure is invalid.
	ERROR_INVALID_ACL = 1336

	// The security ID structure is invalid.
	ERROR_INVALID_SID = 1337

	// The security descriptor structure is invalid.
	ERROR_INVALID_SECURITY_DESCR = 1338

	// The inherited access control list (ACL) or access control entry (ACE)
	// could not be built.
	ERROR_BAD_INHERITANCE_ACL = 1340

	// The server is currently disabled.
	ERROR_SERVER_DISABLED = 1341

	// The server is currently enabled.
	ERROR_SERVER_NOT_DISABLED = 1342

	// The value provided was an invalid value for an identifier authority.
	ERROR_INVALID_ID_AUTHORITY = 1343

	// No more memory is available for security information updates.
	ERROR_ALLOTTED_SPACE_EXCEEDED = 1344

	// The specified attributes are invalid, or incompatible with the
	// attributes for the group as a whole.
	ERROR_INVALID_GROUP_ATTRIBUTES = 1345

	// Either a required impersonation level was not provided, or the
	// provided impersonation level is invalid.
	ERROR_BAD_IMPERSONATION_LEVEL = 1346

	// Cannot open an anonymous level security token.
	ERROR_CANT_OPEN_ANONYMOUS = 1347

	// The validation information class requested was invalid.
	ERROR_BAD_VALIDATION_CLASS = 1348

	// The type of the token is inappropriate for its attempted use.
	ERROR_BAD_TOKEN_TYPE = 1349

	// Unable to perform a security operation on an object
	// which has no associated security.
	ERROR_NO_SECURITY_ON_OBJECT = 1350

	// Indicates a Windows NT Server could not be contacted or that
	// objects within the domain are protected such that necessary
	// information could not be retrieved.
	ERROR_CANT_ACCESS_DOMAIN_INFO = 1351

	// The security account manager (SAM) or local security
	// authority (LSA) server was in the wrong state to perform
	// the security operation.
	ERROR_INVALID_SERVER_STATE = 1352

	// The domain was in the wrong state to perform the security operation.
	ERROR_INVALID_DOMAIN_STATE = 1353

	// This operation is only allowed for the Primary Domain Controller of the domain.
	ERROR_INVALID_DOMAIN_ROLE = 1354

	// The specified domain did not exist.
	ERROR_NO_SUCH_DOMAIN = 1355

	// The specified domain already exists.
	ERROR_DOMAIN_EXISTS = 1356

	// An attempt was made to exceed the limit on the number of domains per server.
	ERROR_DOMAIN_LIMIT_EXCEEDED = 1357

	// Unable to complete the requested operation because of either a
	// catastrophic media failure or a data structure corruption on the disk.
	ERROR_INTERNAL_DB_CORRUPTION = 1358

	// The security account database contains an internal inconsistency.
	ERROR_INTERNAL_ERROR = 1359

	// Generic access types were contained in an access mask which should
	// already be mapped to non-generic types.
	ERROR_GENERIC_NOT_MAPPED = 1360

	// A security descriptor is not in the right format (absolute or self-relative).
	ERROR_BAD_DESCRIPTOR_FORMAT = 1361

	// The requested action is restricted for use by logon processes
	// only.  The calling process has not registered as a logon process.
	ERROR_NOT_LOGON_PROCESS = 1362

	// Cannot start a new logon session with an ID that is already in use.
	ERROR_LOGON_SESSION_EXISTS = 1363

	// A specified authentication package is unknown.
	ERROR_NO_SUCH_PACKAGE = 1364

	// The logon session is not in a state that is consistent with the
	// requested operation.
	ERROR_BAD_LOGON_SESSION_STATE = 1365

	// The logon session ID is already in use.
	ERROR_LOGON_SESSION_COLLISION = 1366

	// A logon request contained an invalid logon type value.
	ERROR_INVALID_LOGON_TYPE = 1367

	// Unable to impersonate via a named pipe until data has been read
	// from that pipe.
	ERROR_CANNOT_IMPERSONATE = 1368

	// The transaction state of a Registry subtree is incompatible with the
	// requested operation.
	ERROR_RXACT_INVALID_STATE = 1369

	// An internal security database corruption has been encountered.
	ERROR_RXACT_COMMIT_FAILURE = 1370

	// Cannot perform this operation on built-in accounts.
	ERROR_SPECIAL_ACCOUNT = 1371

	// Cannot perform this operation on this built-in special group.
	ERROR_SPECIAL_GROUP = 1372

	// Cannot perform this operation on this built-in special user.
	ERROR_SPECIAL_USER = 1373

	// The user cannot be removed from a group because the group
	// is currently the user's primary group.
	ERROR_MEMBERS_PRIMARY_GROUP = 1374

	// The token is already in use as a primary token.
	ERROR_TOKEN_ALREADY_IN_USE = 1375

	// The specified local group does not exist.
	ERROR_NO_SUCH_ALIAS = 1376

	// The specified account name is not a member of the local group.
	ERROR_MEMBER_NOT_IN_ALIAS = 1377

	// The specified account name is already a member of the local group.
	ERROR_MEMBER_IN_ALIAS = 1378

	// The specified local group already exists.
	ERROR_ALIAS_EXISTS = 1379

	// Logon failure: the user has not been granted the requested
	// logon type at this computer.
	ERROR_LOGON_NOT_GRANTED = 1380

	// The maximum number of secrets that may be stored in a single system has been
	// exceeded.
	ERROR_TOO_MANY_SECRETS = 1381

	// The length of a secret exceeds the maximum length allowed.
	ERROR_SECRET_TOO_LONG = 1382

	// The local security authority database contains an internal inconsistency.
	ERROR_INTERNAL_DB_ERROR = 1383

	// During a logon attempt, the user's security context accumulated too many
	// security IDs.
	ERROR_TOO_MANY_CONTEXT_IDS = 1384

	// Logon failure: the user has not been granted the requested logon type
	// at this computer.
	ERROR_LOGON_TYPE_NOT_GRANTED = 1385

	// A cross-encrypted password is necessary to change a user password.
	ERROR_NT_CROSS_ENCRYPTION_REQUIRED = 1386

	// A new member could not be added to a local group because the member does
	// not exist.
	ERROR_NO_SUCH_MEMBER = 1387

	// A new member could not be added to a local group because the member has the
	// wrong account type.
	ERROR_INVALID_MEMBER = 1388

	// Too many security IDs have been specified.
	ERROR_TOO_MANY_SIDS = 1389

	// A cross-encrypted password is necessary to change this user password.
	ERROR_LM_CROSS_ENCRYPTION_REQUIRED = 1390

	// Indicates an TACL contains no inheritable components
	ERROR_NO_INHERITANCE = 1391

	// The file or directory is corrupt and non-readable.
	ERROR_FILE_CORRUPT = 1392

	// The disk structure is corrupt and non-readable.
	ERROR_DISK_CORRUPT = 1393

	// There is no user session key for the specified logon session.
	ERROR_NO_USER_SESSION_KEY = 1394

	// The service being accessed is licensed for a particular number of connections.
	// No more connections can be made to the service at this time
	// because there are already as many connections as the service can accept.
	ERROR_LICENSE_QUOTA_EXCEEDED = 1395

	// WinUser Error Codes
	// Invalid window handle.
	ERROR_INVALID_WINDOW_HANDLE = 1400

	// Invalid menu handle.
	ERROR_INVALID_MENU_HANDLE = 1401

	// Invalid cursor handle.
	ERROR_INVALID_CURSOR_HANDLE = 1402

	// Invalid accelerator table handle.
	ERROR_INVALID_ACCEL_HANDLE = 1403

	// Invalid hook handle.
	ERROR_INVALID_HOOK_HANDLE = 1404

	// Invalid handle to a multiple-window position structure.
	ERROR_INVALID_DWP_HANDLE = 1405

	// Cannot create a top-level child window.
	ERROR_TLW_WITH_WSCHILD = 1406

	// Cannot find window class.
	ERROR_CANNOT_FIND_WND_CLASS = 1407

	// Invalid window, belongs to other thread.
	ERROR_WINDOW_OF_OTHER_THREAD = 1408

	// Hot key is already registered.
	ERROR_HOTKEY_ALREADY_REGISTERED = 1409

	// Class already exists.
	ERROR_CLASS_ALREADY_EXISTS = 1410

	// Class does not exist.
	ERROR_CLASS_DOES_NOT_EXIST = 1411

	// Class still has open windows.
	ERROR_CLASS_HAS_WINDOWS = 1412

	// Invalid index.
	ERROR_INVALID_INDEX = 1413

	// Invalid icon handle.
	ERROR_INVALID_ICON_HANDLE = 1414

	// Using private DIALOG window words.
	ERROR_PRIVATE_DIALOG_INDEX = 1415

	// The listbox identifier was not found.
	ERROR_LISTBOX_ID_NOT_FOUND = 1416

	// No wildcards were found.
	ERROR_NO_WILDCARD_CHARACTERS = 1417

	// Thread does not have a clipboard open.
	ERROR_CLIPBOARD_NOT_OPEN = 1418

	// Hot key is not registered.
	ERROR_HOTKEY_NOT_REGISTERED = 1419

	// The window is not a valid dialog window.
	ERROR_WINDOW_NOT_DIALOG = 1420

	// Control ID not found.
	ERROR_CONTROL_ID_NOT_FOUND = 1421

	// Invalid message for a combo box because it does not have an edit control.
	ERROR_INVALID_COMBOBOX_MESSAGE = 1422

	// The window is not a combo box.
	ERROR_WINDOW_NOT_COMBOBOX = 1423

	// Height must be less than 256.
	ERROR_INVALID_EDIT_HEIGHT = 1424

	// Invalid device context (DC) handle.
	ERROR_DC_NOT_FOUND = 1425

	// Invalid hook procedure type.
	ERROR_INVALID_HOOK_FILTER = 1426

	// Invalid hook procedure.
	ERROR_INVALID_FILTER_PROC = 1427

	// Cannot set non-local hook without a module handle.
	ERROR_HOOK_NEEDS_HMOD = 1428

	// This hook procedure can only be set globally.
	ERROR_GLOBAL_ONLY_HOOK = 1429

	// The journal hook procedure is already installed.
	ERROR_JOURNAL_HOOK_SET = 1430

	// The hook procedure is not installed.
	ERROR_HOOK_NOT_INSTALLED = 1431

	// Invalid message for single-selection listbox.
	ERROR_INVALID_LB_MESSAGE = 1432

	// LB_SETCOUNT sent to non-lazy listbox.
	ERROR_SETCOUNT_ON_BAD_LB = 1433

	// This list box does not support tab stops.
	ERROR_LB_WITHOUT_TABSTOPS = 1434

	// Cannot destroy object created by another thread.
	ERROR_DESTROY_OBJECT_OF_OTHER_THREAD = 1435

	// Child windows cannot have menus.
	ERROR_CHILD_WINDOW_MENU = 1436

	// The window does not have a system menu.
	ERROR_NO_SYSTEM_MENU = 1437

	// Invalid message box style.
	ERROR_INVALID_MSGBOX_STYLE = 1438

	// Invalid system-wide (SPI_*) parameter.
	ERROR_INVALID_SPI_VALUE = 1439

	// Screen already locked.
	ERROR_SCREEN_ALREADY_LOCKED = 1440

	// All handles to windows in a multiple-window position structure must
	// have the same parent.
	ERROR_HWNDS_HAVE_DIFF_PARENT = 1441

	// The window is not a child window.
	ERROR_NOT_CHILD_WINDOW = 1442

	// Invalid GW_* command.
	ERROR_INVALID_GW_COMMAND = 1443

	// Invalid thread identifier.
	ERROR_INVALID_THREAD_ID = 1444

	// Cannot process a message from a window that is not a multiple document
	// interface (MDI) window.
	ERROR_NON_MDICHILD_WINDOW = 1445

	// Popup menu already active.
	ERROR_POPUP_ALREADY_ACTIVE = 1446

	// The window does not have scroll bars.
	ERROR_NO_SCROLLBARS = 1447

	// Scroll bar range cannot be greater than $7FFF.
	ERROR_INVALID_SCROLLBAR_RANGE = 1448

	// Cannot show or remove the window in the way specified.
	ERROR_INVALID_SHOWWIN_COMMAND = 1449

	// Insufficient system resources exist to complete the requested service.
	ERROR_NO_SYSTEM_RESOURCES = 1450

	// Insufficient system resources exist to complete the requested service.
	ERROR_NONPAGED_SYSTEM_RESOURCES = 1451

	// Insufficient system resources exist to complete the requested service.
	ERROR_PAGED_SYSTEM_RESOURCES = 1452

	// Insufficient quota to complete the requested service.
	ERROR_WORKING_SET_QUOTA = 1453

	// Insufficient quota to complete the requested service.
	ERROR_PAGEFILE_QUOTA = 1454

	// The paging file is too small for this operation to complete.
	ERROR_COMMITMENT_LIMIT = 1455

	// A menu item was not found.
	ERROR_MENU_ITEM_NOT_FOUND = 1456

	// Invalid keyboard layout handle.
	ERROR_INVALID_KEYBOARD_HANDLE = 1457

	// Hook type not allowed.
	ERROR_HOOK_TYPE_NOT_ALLOWED = 1458

	// This operation requires an interactive windowstation.
	ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION = 1459

	// This operation returned because the timeout period expired.
	ERROR_TIMEOUT = 1460

	// Eventlog Status Codes
	// The event log file is corrupt.
	ERROR_EVENTLOG_FILE_CORRUPT = 1500

	// No event log file could be opened, so the event logging service did not start.
	ERROR_EVENTLOG_CANT_START = 1501

	// The event log file is full.
	ERROR_LOG_FILE_FULL = 1502

	// The event log file has changed between reads.
	ERROR_EVENTLOG_FILE_CHANGED = 1503
)
View Source 
const (
	TH32CS_SNAPHEAPLIST = 0x00000001
	TH32CS_SNAPPROCESS  = 0x00000002
	TH32CS_SNAPTHREAD   = 0x00000004
	TH32CS_SNAPMODULE   = 0x00000008
	TH32CS_SNAPALL      = TH32CS_SNAPHEAPLIST | TH32CS_SNAPPROCESS | TH32CS_SNAPTHREAD | TH32CS_SNAPMODULE
	TH32CS_INHERIT      = 0x80000000
)

The th32ProcessID argument is only used if TH32CS_SNAPHEAPLIST or TH32CS_SNAPMODULE is specified. th32ProcessID == 0 means the current process.

NOTE that all of the snapshots are global except for the heap and module 

lists which are process specific. To enumerate the heap or module
state for all WIN32 processes call with TH32CS_SNAPALL and the
current process. Then for each process in the TH32CS_SNAPPROCESS
list that isn't the current process, do a call with just
TH32CS_SNAPHEAPLIST and/or TH32CS_SNAPMODULE.

dwFlags

View Source 
const (
	// ChangeWindowMessageFilter  的常量
	MSGFLT_ADD    = 1
	MSGFLT_REMOVE = 2

	// ChangeWindowMessageFilterEx的常量
	MSGFLT_RESET    = 0
	MSGFLT_ALLOW    = 1
	MSGFLT_DISALLOW = 2

	//
	WM_COPYGLOBALDATA = 0x0049
)
View Source 
const (
	VER_PLATFORM_WIN32s        = 0
	VER_PLATFORM_WIN32_WINDOWS = 1
	VER_PLATFORM_WIN32_NT      = 2
	VER_PLATFORM_WIN32_CE      = 3

	VER_EQUAL         = 1
	VER_GREATER       = 2
	VER_GREATER_EQUAL = 3
	VER_LESS          = 4
	VER_LESS_EQUAL    = 5
	VER_AND           = 6
	VER_OR            = 7

	VER_CONDITION_MASK              = 7
	VER_NUM_BITS_PER_CONDITION_MASK = 3

	VER_BUILDNUMBER      = 0x00000004
	VER_MAJORVERSION     = 0x00000002
	VER_MINORVERSION     = 0x00000001
	VER_PLATFORMID       = 0x00000008
	VER_SERVICEPACKMAJOR = 0x00000020
	VER_SERVICEPACKMINOR = 0x00000010
	VER_SUITENAME        = 0x00000040
	VER_PRODUCT_TYPE     = 0x00000080

	VER_NT_WORKSTATION       = 0x0000001
	VER_NT_DOMAIN_CONTROLLER = 0x0000002
	VER_NT_SERVER            = 0x0000003
)

dwPlatformId defines

View Source 
const MAX_PATH = 260
View Source 
const MAX_VERS = 20
View Source 
const (
	NERR_Success = 0
)
View Source 
const (
	SM_SERVERR2 = 89
)
View Source 
const (
	WM_SYSCOMMAND = 0x0112
)

Windows Messages

Variables

View Source 
var (
	Win32MajorVersion int
	Win32MinorVersion int
	Win32BuildNumber  int
	Win32Platform     int
	ServicePackMajor  int
	Win32CSDVersion   string
)

Functions

func CBool 

func CBool(b bool) uintptr

GoBoolToCBool

func CStr 

func CStr(str string) uintptr

内部两个 GoStrToCStr

func CallWindowProc 

func CallWindowProc(lpPrevWndFunc uintptr, hWnd HWND, Msg uint32, wParam, lParam uintptr) uintptr

CallWindowProc

func ChangeWindowMessageFilter 

func ChangeWindowMessageFilter(message, flags uint32) bool

ChangeWindowMessageFilter

func ChangeWindowMessageFilterEx 

func ChangeWindowMessageFilterEx(hWd HWND, message, action uint32, pChangeFilterStruct *TChangeFilterStruct) bool

ChangeWindowMessageFilterEx

func CheckWin32Version 

func CheckWin32Version(AMajor, AMinor int) bool

CheckWin32Version

func CloseHandle 

func CloseHandle(hObject uintptr) bool

CloseHandle

func CreateCompatibleDC 

func CreateCompatibleDC(dc HDC) HDC

func CreateDIBSection 

func CreateDIBSection(dc HDC, p2 *TBitmapInfo, p3 uint32, p4 *uintptr, p5 uintptr, p6 uint32) HBITMAP

func CreateMutex 

func CreateMutex(lpMutexAttributes *TSecurityAttributes, bInitialOwner bool, lpName string) uintptr

CreateMutex

func CreateToolhelp32SnapShot 

func CreateToolhelp32SnapShot(dwFlags, th32ProcessID uint32) uintptr

CreateToolhelp32SnapShot

func DeleteDC 

func DeleteDC(dc HDC) bool

func DeleteObject 

func DeleteObject(p1 HGDIOBJ) bool

func ExtractIcon 

func ExtractIcon(hInst uintptr, lpszExeFileName string, nIconIndex uint32) types.HICON

ExtractIcon

func FixWindowsVersion 

func FixWindowsVersion(MajorVersion, MinorVersion, ServicePackMajor *int)

FixWindowsVersion

func Free 

func Free(pBlock uintptr)

Free 释放内存

func GetCapture 

func GetCapture() HWND

func GetClientRect 

func GetClientRect(hWnd HWND) TRect

GetClientRect 获取指定句柄客户区矩形

func GetCurrentProcess 

func GetCurrentProcess() uintptr

GetCurrentProcess 返回当前进程伪句柄

func GetCurrentProcessId 

func GetCurrentProcessId() uintptr

GetCurrentProcessId 返回当前进程伪句柄

func GetCurrentThread 

func GetCurrentThread() uintptr

GetCurrentThread

func GetCurrentThreadId 

func GetCurrentThreadId() uintptr

GetCurrentThreadId

func GetDC 

func GetDC(hWnd HWND) HDC

func GetFileVersionInfo 

func GetFileVersionInfo(lptstrFilename string, dwHandle, dwLen uint32, lpData uintptr) bool

GetFileVersionInfo

func GetFileVersionInfoSize 

func GetFileVersionInfoSize(lptstrFileName string, lpdwhandle *uint32) uint32

GetFileVersionInfoSize

func GetLastError 

func GetLastError() uint32

GetLastError

func GetModuleHandle 

func GetModuleHandle(lpModuleName string) uintptr

GetModuleHandle 获取当前是实例句柄，可传空

func GetNativeSystemInfo 

func GetNativeSystemInfo(lpSystemInformation *TSystemInfo) bool

GetNativeSystemInfo

func GetSelfModuleHandle 

func GetSelfModuleHandle() uintptr

GetSelfModuleHandle 获取自身模块实例句柄

func GetSystemMetrics 

func GetSystemMetrics(nIndex int32) int32

GetSystemMetrics

func GetTokenInformation 

func GetTokenInformation(TokenHandle uintptr, TokenInformationClass TTokenInformationClass, TokenInformation uintptr, TokenInformationLength uint32,
	ReturnLength *uint32) bool

GetTokenInformation

func GetVersionEx 

func GetVersionEx(lpVersionInformation *TOSVersionInfoEx) bool

获取系统版本信息

func GetWindowLongPtr 

func GetWindowLongPtr(hWnd HWND, nIndex int32) int

GetWindowLongPtr

func GoBool 

func GoBool(b uintptr) bool

CBoolToGoBool

func GoStr 

func GoStr(str []uint16) string

CStrToGoStr

func IsAdministrator 

func IsAdministrator() bool

IsAdministrator 判断当前进程是否以Administrator权限运行中

func IsWow64 

func IsWow64() bool

IsWow64 判断当前进程是否运行在64上 注：只有当exe为Win32并在64位系统上运行时才返回true, 否则都会返回false

func IsWow64Process 

func IsWow64Process(hProcess uintptr) bool

IsWow64Process 检测进程是否运行在64位下

func LoadIcon 

func LoadIcon(hInstance uintptr, lpIconName int) HICON

LoadIcon 从实例资源中加载icon

func LoadIcon2 

func LoadIcon2(hInstance uintptr, lpIconName string) HICON

LoadIcon2 从实例资源中加载icon

func Malloc 

func Malloc(size uintptr) uintptr

Malloc 分配内存，此为手动管理，分配后要使用Free释放

func Memcpy 

func Memcpy(dest, src, count uintptr) uintptr

Memcpy 内存拷贝

func Memset 

func Memset(dest uintptr, val int, count uintptr) uintptr

Memset 将指定内存区值默认为val中的，一般用于清0也是是 Memset(ptr, 0, size)

func MessageBox 

func MessageBox(hWnd uintptr, lpText, lpCaption string, uType uint32) int32

MessageBox 消息框

func MultiByteToWideChar 

func MultiByteToWideChar(CodePage, dwFlags uint32, lpMultiByteStr uintptr, cchMultiByte int, lpWideCharStr uintptr, cchWideChar int) int

MultiByteToWideChar

func NetApiBufferFree 

func NetApiBufferFree(BufPtr *WKSTA_INFO_100) uint32

func NetWkstaGetInfo100 

func NetWkstaGetInfo100(ServerName string, Level uint32, BufPtr **WKSTA_INFO_100) uint32

func OpenInExplorer 

func OpenInExplorer(aFileName string)

OpenInExplorer

func OpenMutex 

func OpenMutex(dwDesiredAccess uint32, bInheritHandle bool, lpName string) uintptr

OpenMutex

func OpenProcess 

func OpenProcess(dwDesiredAccess uint32, bInheritHandle bool, dwProcessId uint32) uintptr

OpenProcess

func OpenProcessToken 

func OpenProcessToken(ProcessHandle uintptr, DesiredAccess uint32, TokenHandle *uintptr) bool

OpenProcessToken

func PostMessage 

func PostMessage(hWd HWND, msg uint32, wParam, lParam uintptr) uintptr

PostMessage

func Process32First 

func Process32First(hSnapshot uintptr, lppe *TProcessEntry32) bool

Process32First

func Process32Next 

func Process32Next(hSnapshot uintptr, lppe *TProcessEntry32) bool

Process32Next

func Realloc 

func Realloc(P, NewSize uintptr) uintptr

Realloc 重新分配内存，此为手动管理，分配后要使用Free释放

func ReleaseCapture 

func ReleaseCapture() bool

func ReleaseDC 

func ReleaseDC(hWnd HWND, dc HDC) int

func ReleaseMutex 

func ReleaseMutex(hMutex uintptr) bool

ReleaseMutex

func SHChangeNotify 

func SHChangeNotify(wEventId int32, uFlags uint32, dwItem1, dwItem2 uintptr)

SHChangeNotify

func SelectObject 

func SelectObject(dc HDC, p2 HGDIOBJ) HGDIOBJ

func SendMessage 

func SendMessage(hWd HWND, msg uint32, wParam, lParam uintptr) uintptr

SendMessage

func SetCapture 

func SetCapture(hWnd HWND) HWND

func SetLastError 

func SetLastError(dwErrCode uint32)

SetLastError

func SetWindowLongPtr 

func SetWindowLongPtr(hWnd HWND, nIndex int32, dwNewLong uintptr) uintptr

SetWindowLongPtr

func ShellExecute 

func ShellExecute(hWnd types.HWND, Operation, FileName, Parameters, Directory string, ShowCmd int32) uintptr

ShellExecute

func System 

func System(aCommand string) int

System 系统命令，现在貌似不管用，以前CGO还管用的呢？Delphi也正常啊，好吧，不知道了。

func UTF8ToANSI 

func UTF8ToANSI(str string) []uint8

UTF8ToANSI

func UpdateLayeredWindow 

func UpdateLayeredWindow(handle HWND, hdcDest HDC, pptDst *TPoint, psize *TSize,
	hdcSrc HDC, pptSrc *TPoint, crKey uint32, pblend *TBlendFunction, dwFlags uint32) bool

func VerQueryValue 

func VerQueryValue(pBlock uintptr, lpSubBlock string, lplpBuffer *uintptr, puLen *uint32) bool

VerQueryValue

func VerSetConditionMask 

func VerSetConditionMask(dwlConditionMask uint64, dwTypeBitMask uint32, dwConditionMask uint8) uint64

VerSetConditionMask

func VerifyVersionInfo 

func VerifyVersionInfo(lpVersionInformation *TOSVersionInfoEx, dwTypeMask uint32, dwlConditionMask uint64) bool

VerifyVersionInfo

func WideCharToMultiByte 

func WideCharToMultiByte(CodePage, dwFlags uint32, lpWideCharStr uintptr, cchWideChar int, lpMultiByteStr uintptr, cchMultiByte int, lpDefaultChar uintptr,
	lpUsedDefaultChar *int32) int

WideCharToMultiByte

Types

type TBitmapInfo 

type TBitmapInfo struct {
	BmiHeader TBitmapInfoHeader
	BmiColors [1]TRGBQuad
}

type TBitmapInfoHeader 

type TBitmapInfoHeader struct {
	BiSize          uint32
	BiWidth         uint32
	BiHeight        uint32
	BiPlanes        uint16
	BiBitCount      uint16
	BiCompression   uint32
	BiSizeImage     uint32
	BiXPelsPerMeter uint32
	BiYPelsPerMeter uint32
	BiClrUsed       uint32
	BiClrImportant  uint32
}

type TBlendFunction 

type TBlendFunction struct {
	BlendOp             uint8
	BlendFlags          uint8
	SourceConstantAlpha uint8
	AlphaFormat         uint8
}

type TChangeFilterStruct 

type TChangeFilterStruct struct {
	CbSize    uint32
	ExtStatus uint32
}

消息过滤的传入结构

type TOSVersionInfo 

type TOSVersionInfo struct {
	DwOSVersionInfoSize uint32
	DwMajorVersion      uint32
	DwMinorVersion      uint32
	DwBuildNumber       uint32
	DwPlatformId        uint32
	SzCSDVersion        [128]uint16 // Maintenance UnicodeString for PSS usage

}

type TOSVersionInfoEx 

type TOSVersionInfoEx struct {
	OSVersionInfoSize uint32
	MajorVersion      uint32
	MinorVersion      uint32
	BuildNumber       uint32
	PlatformId        uint32
	CSDVersion        [128]uint16 // Maintenance UnicodeString for PSS usage
	ServicePackMajor  uint16
	ServicePackMinor  uint16
	SuiteMask         uint16
	ProductType       uint8
	Reserved          uint8
}

type TProcessEntry32 

type TProcessEntry32 struct {
	DwSize              uint32
	CntUsage            uint32
	Th32ProcessID       uint32 // this process
	Th2DefaultHeapID    uintptr
	Th32ModuleID        uint32 // associated exe
	CntThreads          uint32
	Th32ParentProcessID uint32 // this process's parent process
	PcPriClassBase      uint32 // Base priority of process's threads
	DwFlags             uint32
	SzExeFile           [MAX_PATH]uint16 // Path

}

type TRGBQuad 

type TRGBQuad struct {
	RgbBlue     uint8
	RgbGreen    uint8
	RgbRed      uint8
	RgbReserved uint8
}

type TSecurityAttributes 

type TSecurityAttributes struct {
	// contains filtered or unexported fields
}

type TSystemInfo 

type TSystemInfo struct {

	//0: (
	//dwOemId: DWORD);
	//1: (
	ProcessorArchitecture     uint16
	Reserved                  uint16
	PageSize                  uint32
	MinimumApplicationAddress uintptr
	MaximumApplicationAddress uintptr
	ActiveProcessorMask       uintptr
	NumberOfProcessors        uint32
	ProcessorType             uint32
	AllocationGranularity     uint32
	ProcessorLevel            uint16
	ProcessorRevision         uint16
}

type TTokenInformationClass 

type TTokenInformationClass uint32
const (
	TokenUser TTokenInformationClass = iota + 1
	TokenGroups
	TokenPrivileges
	TokenOwner
	TokenPrimaryGroup
	TokenDefaultDacl
	TokenSource
	TokenType
	TokenImpersonationLevel
	TokenStatistics
	TokenRestrictedSids
	TokenSessionId
	TokenGroupsAndPrivileges
	TokenSessionReference
	TokenSandBoxInert
	TokenAuditPolicy
	TokenOrigin
	TokenElevationType
	TokenLinkedToken
	TokenElevation
	TokenHasRestrictions
	TokenAccessInformation
	TokenVirtualizationAllowed
	TokenVirtualizationEnabled
	TokenIntegrityLevel
	TokenUIAccess
	TokenMandatoryPolicy
	TokenLogonSid
	VMaxTokenInfoClass
)

type TTokenType 

type TTokenType uint32
const (
	TokenTPad TTokenType = iota + 0
	TokenPrimary
	TokenImpersonation
)

type TVSFixedFileInfo 

type TVSFixedFileInfo struct {
	Signature        uint32 // e.g. $feef04bd
	StrucVersion     uint32 // e.g. $00000042 = "0.42"
	FileVersionMS    uint32 // e.g. $00030075 = "3.75"
	FileVersionLS    uint32 // e.g. $00000031 = "0.31"
	ProductVersionMS uint32 // e.g. $00030010 = "3.10"
	ProductVersionLS uint32 // e.g. $00000031 = "0.31"
	FileFlagsMask    uint32 // = $3F for version "0.42"
	FileFlags        uint32 // e.g. VFF_DEBUG | VFF_PRERELEASE
	FileOS           uint32 // e.g. VOS_DOS_WINDOWS16
	FileType         uint32 // e.g. VFT_DRIVER
	FileSubtype      uint32 // e.g. VFT2_DRV_KEYBOARD
	FileDateMS       uint32 // e.g. 0
	FileDateLS       uint32 // e.g. 0
}

type WKSTA_INFO_100 

type WKSTA_INFO_100 struct {
	Wki100_platform_id  uint32
	Wki100_computername uintptr // LPWSTR
	Wki100_langroup     uintptr // LPWSTR
	Wki100_ver_major    uint32
	Wki100_ver_minor    uint32
}

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.