Documentation ¶
Index ¶
- Constants
- Variables
- type ApplicationError
- type ApplicationErrorCode
- type ClientHelloInfo
- type ClientToken
- type Config
- type Connection
- type ConnectionID
- type ConnectionIDGenerator
- type ConnectionState
- type DatagramTooLargeError
- type EarlyConnection
- type EarlyListener
- type HandshakeTimeoutError
- type IdleTimeoutError
- type Listener
- type OOBCapablePacketConn
- type ReceiveStream
- type SendStream
- type StatelessResetError
- type StatelessResetKey
- type Stream
- type StreamError
- type StreamErrorCode
- type StreamID
- type TokenGeneratorKey
- type TokenStore
- type Transport
- func (t *Transport) Close() error
- func (t *Transport) Dial(ctx context.Context, addr net.Addr, tlsConf *tls.Config, conf *Config) (Connection, error)
- func (t *Transport) DialEarly(ctx context.Context, addr net.Addr, tlsConf *tls.Config, conf *Config) (EarlyConnection, error)
- func (t *Transport) Listen(tlsConf *tls.Config, conf *Config) (*Listener, error)
- func (t *Transport) ListenEarly(tlsConf *tls.Config, conf *Config) (*EarlyListener, error)
- func (t *Transport) ReadNonQUICPacket(ctx context.Context, b []byte) (int, net.Addr, error)
- func (t *Transport) WriteTo(b []byte, addr net.Addr) (int, error)
- type TransportError
- type TransportErrorCode
- type VersionNegotiationError
- type VersionNumber
Constants ¶
const ( NoError = qerr.NoError InternalError = qerr.InternalError ConnectionRefused = qerr.ConnectionRefused FlowControlError = qerr.FlowControlError StreamLimitError = qerr.StreamLimitError StreamStateError = qerr.StreamStateError FinalSizeError = qerr.FinalSizeError FrameEncodingError = qerr.FrameEncodingError TransportParameterError = qerr.TransportParameterError ConnectionIDLimitError = qerr.ConnectionIDLimitError ProtocolViolation = qerr.ProtocolViolation InvalidToken = qerr.InvalidToken ApplicationErrorErrorCode = qerr.ApplicationErrorErrorCode CryptoBufferExceeded = qerr.CryptoBufferExceeded KeyUpdateError = qerr.KeyUpdateError AEADLimitReached = qerr.AEADLimitReached NoViablePathError = qerr.NoViablePathError )
Variables ¶
var ConnectionTracingKey = connTracingCtxKey{}
ConnectionTracingKey can be used to associate a ConnectionTracer with a Connection. It is set on the Connection.Context() context, as well as on the context passed to logging.Tracer.NewConnectionTracer.
var Err0RTTRejected = errors.New("0-RTT rejected")
Err0RTTRejected is the returned from: * Open{Uni}Stream{Sync} * Accept{Uni}Stream * Stream.Read and Stream.Write when the server rejects a 0-RTT connection attempt.
var ErrServerClosed = errors.New("quic: server closed")
ErrServerClosed is returned by the Listener or EarlyListener's Accept method after a call to Close.
var QUICVersionContextKey = handshake.QUICVersionContextKey
QUICVersionContextKey can be used to find out the QUIC version of a TLS handshake from the context returned by tls.Config.ClientHelloInfo.Context.
Functions ¶
This section is empty.
Types ¶
type ApplicationError ¶ added in v0.32.0
type ApplicationError = qerr.ApplicationError
type ApplicationErrorCode ¶ added in v0.32.0
type ApplicationErrorCode = qerr.ApplicationErrorCode
type ClientHelloInfo ¶ added in v0.35.0
type ClientToken ¶ added in v0.32.0
type ClientToken struct {
// contains filtered or unexported fields
}
A ClientToken is a token received by the client. It can be used to skip address validation on future connection attempts.
type Config ¶
type Config struct { // GetConfigForClient is called for incoming connections. // If the error is not nil, the connection attempt is refused. GetConfigForClient func(info *ClientHelloInfo) (*Config, error) // The QUIC versions that can be negotiated. // If not set, it uses all versions available. Versions []VersionNumber // HandshakeIdleTimeout is the idle timeout before completion of the handshake. // If we don't receive any packet from the peer within this time, the connection attempt is aborted. // Additionally, if the handshake doesn't complete in twice this time, the connection attempt is also aborted. // If this value is zero, the timeout is set to 5 seconds. HandshakeIdleTimeout time.Duration // MaxIdleTimeout is the maximum duration that may pass without any incoming network activity. // The actual value for the idle timeout is the minimum of this value and the peer's. // This value only applies after the handshake has completed. // If the timeout is exceeded, the connection is closed. // If this value is zero, the timeout is set to 30 seconds. MaxIdleTimeout time.Duration // RequireAddressValidation determines if a QUIC Retry packet is sent. // This allows the server to verify the client's address, at the cost of increasing the handshake latency by 1 RTT. // See https://datatracker.ietf.org/doc/html/rfc9000#section-8 for details. // If not set, every client is forced to prove its remote address. RequireAddressValidation func(net.Addr) bool // The TokenStore stores tokens received from the server. // Tokens are used to skip address validation on future connection attempts. // The key used to store tokens is the ServerName from the tls.Config, if set // otherwise the token is associated with the server's IP address. TokenStore TokenStore // InitialStreamReceiveWindow is the initial size of the stream-level flow control window for receiving data. // If the application is consuming data quickly enough, the flow control auto-tuning algorithm // will increase the window up to MaxStreamReceiveWindow. // If this value is zero, it will default to 512 KB. // Values larger than the maximum varint (quicvarint.Max) will be clipped to that value. InitialStreamReceiveWindow uint64 // MaxStreamReceiveWindow is the maximum stream-level flow control window for receiving data. // If this value is zero, it will default to 6 MB. // Values larger than the maximum varint (quicvarint.Max) will be clipped to that value. MaxStreamReceiveWindow uint64 // InitialConnectionReceiveWindow is the initial size of the stream-level flow control window for receiving data. // If the application is consuming data quickly enough, the flow control auto-tuning algorithm // will increase the window up to MaxConnectionReceiveWindow. // If this value is zero, it will default to 512 KB. // Values larger than the maximum varint (quicvarint.Max) will be clipped to that value. InitialConnectionReceiveWindow uint64 // MaxConnectionReceiveWindow is the connection-level flow control window for receiving data. // If this value is zero, it will default to 15 MB. // Values larger than the maximum varint (quicvarint.Max) will be clipped to that value. MaxConnectionReceiveWindow uint64 // AllowConnectionWindowIncrease is called every time the connection flow controller attempts // to increase the connection flow control window. // If set, the caller can prevent an increase of the window. Typically, it would do so to // limit the memory usage. // To avoid deadlocks, it is not valid to call other functions on the connection or on streams // in this callback. AllowConnectionWindowIncrease func(conn Connection, delta uint64) bool // MaxIncomingStreams is the maximum number of concurrent bidirectional streams that a peer is allowed to open. // If not set, it will default to 100. // If set to a negative value, it doesn't allow any bidirectional streams. // Values larger than 2^60 will be clipped to that value. MaxIncomingStreams int64 // MaxIncomingUniStreams is the maximum number of concurrent unidirectional streams that a peer is allowed to open. // If not set, it will default to 100. // If set to a negative value, it doesn't allow any unidirectional streams. // Values larger than 2^60 will be clipped to that value. MaxIncomingUniStreams int64 // KeepAlivePeriod defines whether this peer will periodically send a packet to keep the connection alive. // If set to 0, then no keep alive is sent. Otherwise, the keep alive is sent on that period (or at most // every half of MaxIdleTimeout, whichever is smaller). KeepAlivePeriod time.Duration // DisablePathMTUDiscovery disables Path MTU Discovery (RFC 8899). // This allows the sending of QUIC packets that fully utilize the available MTU of the path. // Path MTU discovery is only available on systems that allow setting of the Don't Fragment (DF) bit. // If unavailable or disabled, packets will be at most 1252 (IPv4) / 1232 (IPv6) bytes in size. DisablePathMTUDiscovery bool // Allow0RTT allows the application to decide if a 0-RTT connection attempt should be accepted. // Only valid for the server. Allow0RTT bool // Enable QUIC datagram support (RFC 9221). EnableDatagrams bool Tracer func(context.Context, logging.Perspective, ConnectionID) *logging.ConnectionTracer }
Config contains all configuration data needed for a QUIC server or client.
type Connection ¶ added in v0.32.0
type Connection interface { // AcceptStream returns the next stream opened by the peer, blocking until one is available. // If the connection was closed due to a timeout, the error satisfies // the net.Error interface, and Timeout() will be true. AcceptStream(context.Context) (Stream, error) // AcceptUniStream returns the next unidirectional stream opened by the peer, blocking until one is available. // If the connection was closed due to a timeout, the error satisfies // the net.Error interface, and Timeout() will be true. AcceptUniStream(context.Context) (ReceiveStream, error) // OpenStream opens a new bidirectional QUIC stream. // There is no signaling to the peer about new streams: // The peer can only accept the stream after data has been sent on the stream. // If the error is non-nil, it satisfies the net.Error interface. // When reaching the peer's stream limit, err.Temporary() will be true. // If the connection was closed due to a timeout, Timeout() will be true. OpenStream() (Stream, error) // OpenStreamSync opens a new bidirectional QUIC stream. // It blocks until a new stream can be opened. // If the error is non-nil, it satisfies the net.Error interface. // If the connection was closed due to a timeout, Timeout() will be true. OpenStreamSync(context.Context) (Stream, error) // OpenUniStream opens a new outgoing unidirectional QUIC stream. // If the error is non-nil, it satisfies the net.Error interface. // When reaching the peer's stream limit, Temporary() will be true. // If the connection was closed due to a timeout, Timeout() will be true. OpenUniStream() (SendStream, error) // OpenUniStreamSync opens a new outgoing unidirectional QUIC stream. // It blocks until a new stream can be opened. // If the error is non-nil, it satisfies the net.Error interface. // If the connection was closed due to a timeout, Timeout() will be true. OpenUniStreamSync(context.Context) (SendStream, error) // LocalAddr returns the local address. LocalAddr() net.Addr // RemoteAddr returns the address of the peer. RemoteAddr() net.Addr // CloseWithError closes the connection with an error. // The error string will be sent to the peer. CloseWithError(ApplicationErrorCode, string) error // Context returns a context that is cancelled when the connection is closed. // The cancellation cause is set to the error that caused the connection to // close, or `context.Canceled` in case the listener is closed first. Context() context.Context // ConnectionState returns basic details about the QUIC connection. // Warning: This API should not be considered stable and might change soon. ConnectionState() ConnectionState // SendDatagram sends a message using a QUIC datagram, as specified in RFC 9221. // There is no delivery guarantee for DATAGRAM frames, they are not retransmitted if lost. // The payload of the datagram needs to fit into a single QUIC packet. // In addition, a datagram may be dropped before being sent out if the available packet size suddenly decreases. // If the payload is too large to be sent at the current time, a DatagramTooLargeError is returned. SendDatagram(payload []byte) error // ReceiveDatagram gets a message received in a datagram, as specified in RFC 9221. ReceiveDatagram(context.Context) ([]byte, error) }
A Connection is a QUIC connection between two peers. Calls to the connection (and to streams) can return the following types of errors: * ApplicationError: for errors triggered by the application running on top of QUIC * TransportError: for errors triggered by the QUIC transport (in many cases a misbehaving peer) * IdleTimeoutError: when the peer goes away unexpectedly (this is a net.Error timeout error) * HandshakeTimeoutError: when the cryptographic handshake takes too long (this is a net.Error timeout error) * StatelessResetError: when we receive a stateless reset (this is a net.Error temporary error) * VersionNegotiationError: returned by the client, when there's no version overlap between the peers
func Dial ¶
func Dial(ctx context.Context, c net.PacketConn, addr net.Addr, tlsConf *tls.Config, conf *Config) (Connection, error)
Dial establishes a new QUIC connection to a server using a net.PacketConn. If the PacketConn satisfies the OOBCapablePacketConn interface (as a net.UDPConn does), ECN and packet info support will be enabled. In this case, ReadMsgUDP and WriteMsgUDP will be used instead of ReadFrom and WriteTo to read/write packets. The tls.Config must define an application protocol (using NextProtos).
This is a convenience function. More advanced use cases should instantiate a Transport, which offers configuration options for a more fine-grained control of the connection establishment, including reusing the underlying UDP socket for multiple QUIC connections.
func DialAddr ¶
func DialAddr(ctx context.Context, addr string, tlsConf *tls.Config, conf *Config) (Connection, error)
DialAddr establishes a new QUIC connection to a server. It resolves the address, and then creates a new UDP connection to dial the QUIC server. When the QUIC connection is closed, this UDP connection is closed. See Dial for more details.
type ConnectionID ¶ added in v0.32.0
type ConnectionID = protocol.ConnectionID
A ConnectionID is a QUIC Connection ID, as defined in RFC 9000. It is not able to handle QUIC Connection IDs longer than 20 bytes, as they are allowed by RFC 8999.
func ConnectionIDFromBytes ¶ added in v0.32.0
func ConnectionIDFromBytes(b []byte) ConnectionID
ConnectionIDFromBytes interprets b as a Connection ID. It panics if b is longer than 20 bytes.
type ConnectionIDGenerator ¶ added in v0.32.0
type ConnectionIDGenerator interface { // GenerateConnectionID generates a new ConnectionID. // Generated ConnectionIDs should be unique and observers should not be able to correlate two ConnectionIDs. GenerateConnectionID() (ConnectionID, error) // ConnectionIDLen tells what is the length of the ConnectionIDs generated by the implementation of // this interface. // Effectively, this means that implementations of ConnectionIDGenerator must always return constant-size // connection IDs. Valid lengths are between 0 and 20 and calls to GenerateConnectionID. // 0-length ConnectionsIDs can be used when an endpoint (server or client) does not require multiplexing connections // in the presence of a connection migration environment. ConnectionIDLen() int }
A ConnectionIDGenerator is an interface that allows clients to implement their own format for the Connection IDs that servers/clients use as SrcConnectionID in QUIC packets.
Connection IDs generated by an implementation should always produce IDs of constant size.
type ConnectionState ¶ added in v0.7.0
type ConnectionState struct { // TLS contains information about the TLS connection state, incl. the tls.ConnectionState. TLS tls.ConnectionState // SupportsDatagrams says if support for QUIC datagrams (RFC 9221) was negotiated. // This requires both nodes to support and enable the datagram extensions (via Config.EnableDatagrams). // If datagram support was negotiated, datagrams can be sent and received using the // SendDatagram and ReceiveDatagram methods on the Connection. SupportsDatagrams bool // Used0RTT says if 0-RTT resumption was used. Used0RTT bool // Version is the QUIC version of the QUIC connection. Version VersionNumber // GSO says if generic segmentation offload is used GSO bool }
ConnectionState records basic details about a QUIC connection
type DatagramTooLargeError ¶ added in v0.41.0
type DatagramTooLargeError struct {
PeerMaxDatagramFrameSize int64
}
DatagramTooLargeError is returned from Connection.SendDatagram if the payload is too large to be sent.
func (*DatagramTooLargeError) Error ¶ added in v0.41.0
func (e *DatagramTooLargeError) Error() string
func (*DatagramTooLargeError) Is ¶ added in v0.41.0
func (e *DatagramTooLargeError) Is(target error) bool
type EarlyConnection ¶ added in v0.32.0
type EarlyConnection interface { Connection // HandshakeComplete blocks until the handshake completes (or fails). // For the client, data sent before completion of the handshake is encrypted with 0-RTT keys. // For the server, data sent before completion of the handshake is encrypted with 1-RTT keys, // however the client's identity is only verified once the handshake completes. HandshakeComplete() <-chan struct{} NextConnection() Connection }
An EarlyConnection is a connection that is handshaking. Data sent during the handshake is encrypted using the forward secure keys. When using client certificates, the client's identity is only verified after completion of the handshake.
func DialAddrEarly ¶ added in v0.32.0
func DialAddrEarly(ctx context.Context, addr string, tlsConf *tls.Config, conf *Config) (EarlyConnection, error)
DialAddrEarly establishes a new 0-RTT QUIC connection to a server. See DialAddr for more details.
type EarlyListener ¶ added in v0.32.0
type EarlyListener struct {
// contains filtered or unexported fields
}
An EarlyListener listens for incoming QUIC connections, and returns them before the handshake completes. For connections that don't use 0-RTT, this allows the server to send 0.5-RTT data. This data is encrypted with forward-secure keys, however, the client's identity has not yet been verified. For connection using 0-RTT, this allows the server to accept and respond to streams that the client opened in the 0-RTT data it sent. Note that at this point during the handshake, the live-ness of the client has not yet been confirmed, and the 0-RTT data could have been replayed by an attacker.
func ListenAddrEarly ¶ added in v0.32.0
ListenAddrEarly works like ListenAddr, but it returns connections before the handshake completes.
func ListenEarly ¶ added in v0.32.0
func ListenEarly(conn net.PacketConn, tlsConf *tls.Config, config *Config) (*EarlyListener, error)
ListenEarly works like Listen, but it returns connections before the handshake completes.
func (*EarlyListener) Accept ¶ added in v0.32.0
func (l *EarlyListener) Accept(ctx context.Context) (EarlyConnection, error)
Accept returns a new connections. It should be called in a loop.
func (*EarlyListener) Addr ¶ added in v0.32.0
func (l *EarlyListener) Addr() net.Addr
Addr returns the local network addr that the server is listening on.
func (*EarlyListener) Close ¶ added in v0.32.0
func (l *EarlyListener) Close() error
Close the server. All active connections will be closed.
type HandshakeTimeoutError ¶ added in v0.32.0
type HandshakeTimeoutError = qerr.HandshakeTimeoutError
type IdleTimeoutError ¶ added in v0.32.0
type IdleTimeoutError = qerr.IdleTimeoutError
type Listener ¶
type Listener struct {
// contains filtered or unexported fields
}
A Listener listens for incoming QUIC connections. It returns connections once the handshake has completed.
func Listen ¶
Listen listens for QUIC connections on a given net.PacketConn. If the PacketConn satisfies the OOBCapablePacketConn interface (as a net.UDPConn does), ECN and packet info support will be enabled. In this case, ReadMsgUDP and WriteMsgUDP will be used instead of ReadFrom and WriteTo to read/write packets. A single net.PacketConn can only be used for a single call to Listen.
The tls.Config must not be nil and must contain a certificate configuration. Furthermore, it must define an application control (using NextProtos). The quic.Config may be nil, in that case the default values will be used.
This is a convenience function. More advanced use cases should instantiate a Transport, which offers configuration options for a more fine-grained control of the connection establishment, including reusing the underlying UDP socket for outgoing QUIC connections. When closing a listener created with Listen, all established QUIC connections will be closed immediately.
func ListenAddr ¶
ListenAddr creates a QUIC server listening on a given address. See Listen for more details.
func (*Listener) Accept ¶ added in v0.6.0
func (l *Listener) Accept(ctx context.Context) (Connection, error)
Accept returns new connections. It should be called in a loop.
func (*Listener) Close ¶
Close closes the listener. Accept will return ErrServerClosed as soon as all connections in the accept queue have been accepted. QUIC handshakes that are still in flight will be rejected with a CONNECTION_REFUSED error. The effect of closing the listener depends on how it was created: * if it was created using Transport.Listen, already established connections will be unaffected * if it was created using the Listen convenience method, all established connection will be closed immediately
type OOBCapablePacketConn ¶ added in v0.32.0
type OOBCapablePacketConn interface { net.PacketConn SyscallConn() (syscall.RawConn, error) SetReadBuffer(int) error ReadMsgUDP(b, oob []byte) (n, oobn, flags int, addr *net.UDPAddr, err error) WriteMsgUDP(b, oob []byte, addr *net.UDPAddr) (n, oobn int, err error) }
OOBCapablePacketConn is a connection that allows the reading of ECN bits from the IP header. If the PacketConn passed to Dial or Listen satisfies this interface, quic-go will use it. In this case, ReadMsgUDP() will be used instead of ReadFrom() to read packets.
type ReceiveStream ¶ added in v0.7.0
type ReceiveStream interface { // StreamID returns the stream ID. StreamID() StreamID // Read reads data from the stream. // Read can be made to time out and return a net.Error with Timeout() == true // after a fixed time limit; see SetDeadline and SetReadDeadline. // If the stream was canceled by the peer, the error implements the StreamError // interface, and Canceled() == true. // If the connection was closed due to a timeout, the error satisfies // the net.Error interface, and Timeout() will be true. io.Reader // CancelRead aborts receiving on this stream. // It will ask the peer to stop transmitting stream data. // Read will unblock immediately, and future Read calls will fail. // When called multiple times or after reading the io.EOF it is a no-op. CancelRead(StreamErrorCode) SetReadDeadline(t time.Time) error }
A ReceiveStream is a unidirectional Receive Stream.
type SendStream ¶ added in v0.7.0
type SendStream interface { // StreamID returns the stream ID. StreamID() StreamID // Write writes data to the stream. // Write can be made to time out and return a net.Error with Timeout() == true // after a fixed time limit; see SetDeadline and SetWriteDeadline. // If the stream was canceled by the peer, the error implements the StreamError // interface, and Canceled() == true. // If the connection was closed due to a timeout, the error satisfies // the net.Error interface, and Timeout() will be true. io.Writer // Close closes the write-direction of the stream. // Future calls to Write are not permitted after calling Close. // It must not be called concurrently with Write. // It must not be called after calling CancelWrite. io.Closer // CancelWrite aborts sending on this stream. // Data already written, but not yet delivered to the peer is not guaranteed to be delivered reliably. // Write will unblock immediately, and future calls to Write will fail. // When called multiple times or after closing the stream it is a no-op. CancelWrite(StreamErrorCode) // The Context is canceled as soon as the write-side of the stream is closed. // This happens when Close() or CancelWrite() is called, or when the peer // cancels the read-side of their stream. // The cancellation cause is set to the error that caused the stream to // close, or `context.Canceled` in case the stream is closed without error. Context() context.Context // SetWriteDeadline sets the deadline for future Write calls // and any currently-blocked Write call. // Even if write times out, it may return n > 0, indicating that // some data was successfully written. // A zero value for t means Write will not time out. SetWriteDeadline(t time.Time) error }
A SendStream is a unidirectional Send Stream.
type StatelessResetError ¶ added in v0.32.0
type StatelessResetError = qerr.StatelessResetError
type StatelessResetKey ¶ added in v0.32.0
type StatelessResetKey [32]byte
StatelessResetKey is a key used to derive stateless reset tokens.
type Stream ¶
type Stream interface { ReceiveStream SendStream // SetDeadline sets the read and write deadlines associated // with the connection. It is equivalent to calling both // SetReadDeadline and SetWriteDeadline. SetDeadline(t time.Time) error }
Stream is the interface implemented by QUIC streams In addition to the errors listed on the Connection, calls to stream functions can return a StreamError if the stream is canceled.
type StreamError ¶ added in v0.7.0
type StreamError struct { StreamID StreamID ErrorCode StreamErrorCode Remote bool }
A StreamError is used for Stream.CancelRead and Stream.CancelWrite. It is also returned from Stream.Read and Stream.Write if the peer canceled reading or writing.
func (*StreamError) Error ¶ added in v0.32.0
func (e *StreamError) Error() string
func (*StreamError) Is ¶ added in v0.32.0
func (e *StreamError) Is(target error) bool
type StreamErrorCode ¶ added in v0.32.0
type StreamErrorCode = qerr.StreamErrorCode
type TokenGeneratorKey ¶ added in v0.39.0
type TokenGeneratorKey = handshake.TokenProtectorKey
TokenGeneratorKey is a key used to encrypt session resumption tokens.
type TokenStore ¶ added in v0.32.0
type TokenStore interface { // Pop searches for a ClientToken associated with the given key. // Since tokens are not supposed to be reused, it must remove the token from the cache. // It returns nil when no token is found. Pop(key string) (token *ClientToken) // Put adds a token to the cache with the given key. It might get called // multiple times in a connection. Put(key string, token *ClientToken) }
func NewLRUTokenStore ¶ added in v0.32.0
func NewLRUTokenStore(maxOrigins, tokensPerOrigin int) TokenStore
NewLRUTokenStore creates a new LRU cache for tokens received by the client. maxOrigins specifies how many origins this cache is saving tokens for. tokensPerOrigin specifies the maximum number of tokens per origin.
type Transport ¶ added in v0.35.0
type Transport struct { // A single net.PacketConn can only be handled by one Transport. // Bad things will happen if passed to multiple Transports. // // A number of optimizations will be enabled if the connections implements the OOBCapablePacketConn interface, // as a *net.UDPConn does. // 1. It enables the Don't Fragment (DF) bit on the IP header. // This is required to run DPLPMTUD (Path MTU Discovery, RFC 8899). // 2. It enables reading of the ECN bits from the IP header. // This allows the remote node to speed up its loss detection and recovery. // 3. It uses batched syscalls (recvmmsg) to more efficiently receive packets from the socket. // 4. It uses Generic Segmentation Offload (GSO) to efficiently send batches of packets (on Linux). // // After passing the connection to the Transport, it's invalid to call ReadFrom or WriteTo on the connection. Conn net.PacketConn // The length of the connection ID in bytes. // It can be 0, or any value between 4 and 18. // If unset, a 4 byte connection ID will be used. ConnectionIDLength int // Use for generating new connection IDs. // This allows the application to control of the connection IDs used, // which allows routing / load balancing based on connection IDs. // All Connection IDs returned by the ConnectionIDGenerator MUST // have the same length. ConnectionIDGenerator ConnectionIDGenerator // The StatelessResetKey is used to generate stateless reset tokens. // If no key is configured, sending of stateless resets is disabled. // It is highly recommended to configure a stateless reset key, as stateless resets // allow the peer to quickly recover from crashes and reboots of this node. // See section 10.3 of RFC 9000 for details. StatelessResetKey *StatelessResetKey // The TokenGeneratorKey is used to encrypt session resumption tokens. // If no key is configured, a random key will be generated. // If multiple servers are authoritative for the same domain, they should use the same key, // see section 8.1.3 of RFC 9000 for details. TokenGeneratorKey *TokenGeneratorKey // MaxTokenAge is the maximum age of the resumption token presented during the handshake. // These tokens allow skipping address resumption when resuming a QUIC connection, // and are especially useful when using 0-RTT. // If not set, it defaults to 24 hours. // See section 8.1.3 of RFC 9000 for details. MaxTokenAge time.Duration // DisableVersionNegotiationPackets disables the sending of Version Negotiation packets. // This can be useful if version information is exchanged out-of-band. // It has no effect for clients. DisableVersionNegotiationPackets bool // A Tracer traces events that don't belong to a single QUIC connection. Tracer *logging.Tracer // contains filtered or unexported fields }
The Transport is the central point to manage incoming and outgoing QUIC connections. QUIC demultiplexes connections based on their QUIC Connection IDs, not based on the 4-tuple. This means that a single UDP socket can be used for listening for incoming connections, as well as for dialing an arbitrary number of outgoing connections. A Transport handles a single net.PacketConn, and offers a range of configuration options compared to the simple helper functions like Listen and Dial that this package provides.
func (*Transport) Close ¶ added in v0.35.0
Close closes the underlying connection. If any listener was started, it will be closed as well. It is invalid to start new listeners or connections after that.
func (*Transport) Dial ¶ added in v0.35.0
func (t *Transport) Dial(ctx context.Context, addr net.Addr, tlsConf *tls.Config, conf *Config) (Connection, error)
Dial dials a new connection to a remote host (not using 0-RTT).
func (*Transport) DialEarly ¶ added in v0.35.0
func (t *Transport) DialEarly(ctx context.Context, addr net.Addr, tlsConf *tls.Config, conf *Config) (EarlyConnection, error)
DialEarly dials a new connection, attempting to use 0-RTT if possible.
func (*Transport) Listen ¶ added in v0.35.0
Listen starts listening for incoming QUIC connections. There can only be a single listener on any net.PacketConn. Listen may only be called again after the current Listener was closed.
func (*Transport) ListenEarly ¶ added in v0.35.0
ListenEarly starts listening for incoming QUIC connections. There can only be a single listener on any net.PacketConn. Listen may only be called again after the current Listener was closed.
func (*Transport) ReadNonQUICPacket ¶ added in v0.38.0
ReadNonQUICPacket reads non-QUIC packets received on the underlying connection. The detection logic is very simple: Any packet that has the first and second bit of the packet set to 0. Note that this is stricter than the detection logic defined in RFC 9443.
type TransportError ¶ added in v0.32.0
type TransportError = qerr.TransportError
type TransportErrorCode ¶ added in v0.32.0
type TransportErrorCode = qerr.TransportErrorCode
type VersionNegotiationError ¶ added in v0.32.0
type VersionNegotiationError = qerr.VersionNegotiationError
type VersionNumber ¶ added in v0.6.0
type VersionNumber = protocol.VersionNumber
A VersionNumber is a QUIC version number.
Source Files ¶
- buffer_pool.go
- client.go
- closed_conn.go
- config.go
- conn_id_generator.go
- conn_id_manager.go
- connection.go
- connection_timer.go
- crypto_stream.go
- crypto_stream_manager.go
- datagram_queue.go
- errors.go
- frame_sorter.go
- framer.go
- interface.go
- mtu_discoverer.go
- multiplexer.go
- packet_handler_map.go
- packet_packer.go
- packet_unpacker.go
- receive_stream.go
- retransmission_queue.go
- send_conn.go
- send_queue.go
- send_stream.go
- server.go
- stream.go
- streams_map.go
- streams_map_incoming.go
- streams_map_outgoing.go
- sys_conn.go
- sys_conn_buffers.go
- sys_conn_buffers_write.go
- sys_conn_df_linux.go
- sys_conn_helper_linux.go
- sys_conn_oob.go
- token_store.go
- transport.go
- window_update_queue.go
Directories ¶
Path | Synopsis |
---|---|
fuzzing
|
|
integrationtests
|
|
internal
|
|
mocks
Code generated by MockGen.
|
Code generated by MockGen. |
mocks/ackhandler
Code generated by MockGen.
|
Code generated by MockGen. |
mocks/logging/internal
Code generated by MockGen.
|
Code generated by MockGen. |
mocks/quic
Code generated by MockGen.
|
Code generated by MockGen. |
mocks/tls
Code generated by MockGen.
|
Code generated by MockGen. |
utils/linkedlist
Package list implements a doubly linked list.
|
Package list implements a doubly linked list. |
interop
|
|
Package logging defines a logging interface for quic-go.
|
Package logging defines a logging interface for quic-go. |