flow

package
v0.23.4 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 9, 2021 License: AGPL-3.0 Imports: 33 Imported by: 241

Documentation

Overview

(c) 2019 Dapper Labs - ALL RIGHTS RESERVED

Index

Constants

View Source 
const (
	ServiceEventSetup  = "setup"
	ServiceEventCommit = "commit"
)
View Source 
const (
	// AddressLength is the size of an account address in bytes.
	// (n) is the size of an account address in bits.
	AddressLength = (linearCodeN + 7) >> 3
)
View Source 
const DefaultMaxAddressIndex = 20_000_000

DefaultMaxAddressIndex is the default for the maximum address index allowed to be acceptable by collection and acccess nodes.

View Source 
const DefaultMaxCollectionByteSize = 3_000_000 // ~3MB. This is should always be higher than the limit on single tx size.

DefaultMaxCollectionByteSize is the default maximum value for a collection byte size.

View Source 
const DefaultMaxCollectionSize = 100

DefaultMaxCollectionSize is the default maximum number of transactions allowed inside a collection.

View Source 
const DefaultMaxCollectionTotalGas = 10_000_000 // 10M

DefaultMaxCollectionTotalGas is the default maximum value for total gas allowed to be included in a collection.

View Source 
const DefaultMaxTransactionByteSize = 1_500_000

DefaultMaxTransactionByteSize is the default maximum transaction byte size. (~1.5MB)

View Source 
const DefaultMaxTransactionGasLimit = 9999

DefaultMaxTransactionGasLimit is the default maximum value for the transaction gas limit.

View Source 
const DefaultProtocolVersion = 0

DefaultProtocolVersion is the default protocol version, indicating none was explicitly set during bootstrapping.

View Source 
const DefaultTransactionExpiry = 10 * 60

DefaultTransactionExpiry is the default expiry for transactions, measured in blocks. Equivalent to 10 minutes for a 1-second block time.

View Source 
const DefaultTransactionExpiryBuffer = 30

DefaultTransactionExpiryBuffer is the default buffer time between a transaction being ingested by a collection node and being included in a collection and block.

View Source 
const DefaultValueLogGCFrequency = 10 * 60

DefaultValueLogGCFrequency is the default frequency in blocks that we call the badger value log GC. Equivalent to 10 mins for a 1 second block time

View Source 
const DomainTagLength = 32
View Source 
const EpochSetupRandomSourceLength = 16

EpochSetupRandomSourceLength is the required length of the random source included in an EpochSetup service event.

View Source 
const IdentifierLen = 32
View Source 
const TransactionTagString = "FLOW-V0.0-transaction"
View Source 
const UserTagString = "FLOW-V0.0-user"

Variables

View Source 
var (
	ErrSegmentMissingSeal        = fmt.Errorf("sealing segment failed sanity check: highest block in segment does not contain seal for lowest")
	ErrSegmentBlocksWrongLen     = fmt.Errorf("sealing segment failed sanity check: must have atleast 2 blocks")
	ErrSegmentInvalidBlockHeight = fmt.Errorf("sealing segment failed sanity check: blocks must be in ascending order")
	ErrSegmentResultLookup       = fmt.Errorf("failed to lookup execution result")
	ErrInvalidRootSegmentView    = fmt.Errorf("invalid root sealing segment block view")
)
View Source 
var DummyStateCommitment = StateCommitment(hash.DummyHash)

DummyStateCommitment is an arbitrary value used in function failure cases, although it can represent a valid state commitment.

View Source 
var EmptyAddress = Address{}

EmptyAddress is the default value of a variable of type Address

View Source 
var GenesisTime = time.Date(2018, time.December, 19, 22, 32, 30, 42, time.UTC)

GenesisTime defines the timestamp of the genesis block.

View Source 
var NoChunksError = errors.New("execution result has no chunks")
View Source 
var TransactionDomainTag = paddedDomainTag(TransactionTagString)

TransactionDomainTag is the prefix of all signed transaction payloads.

A domain tag is encoded as UTF-8 bytes, right padded to a total length of 32 bytes.

View Source 
var UserDomainTag = paddedDomainTag(UserTagString)

UserDomainTag is the prefix of all signed user space payloads.

A domain tag is encoded as UTF-8 bytes, right padded to a total length of 32 bytes.

View Source 
var (
	// ZeroID is the lowest value in the 32-byte ID space.
	ZeroID = Identifier{}
)

Functions

func CheckConcatSum 

func CheckConcatSum(sum Identifier, fps ...Identifier) bool

func CheckMerkleRoot 

func CheckMerkleRoot(root Identifier, ids ...Identifier) bool

func CompatibleAlgorithms 

func CompatibleAlgorithms(sigAlgo crypto.SigningAlgorithm, hashAlgo hash.HashingAlgorithm) bool

CompatibleAlgorithms returns true if the signature and hash algorithms are compatible.

func EncodeAccountPrivateKey 

func EncodeAccountPrivateKey(a AccountPrivateKey) ([]byte, error)

func EncodeAccountPublicKey 

func EncodeAccountPublicKey(a AccountPublicKey) ([]byte, error)

func EncodeRuntimeAccountPublicKey 

func EncodeRuntimeAccountPublicKey(a AccountPublicKey) ([]byte, error)

func ToDKGParticipantLookup added in v0.17.0 

func ToDKGParticipantLookup(participants IdentityList, keys []crypto.PublicKey) (map[Identifier]DKGParticipant, error)

ToDKGParticipantLookup constructs a DKG participant lookup from an identity list and a key list. The identity list must be EXACTLY the same (order and contents) as that used when initializing the corresponding DKG instance.

Types

type Account 

type Account struct {
	Address   Address
	Balance   uint64
	Keys      []AccountPublicKey
	Contracts map[string][]byte
}

Account represents an account on the Flow network.

An account can be an externally owned account or a contract account with code.

type AccountPrivateKey 

type AccountPrivateKey struct {
	PrivateKey crypto.PrivateKey
	SignAlgo   crypto.SigningAlgorithm
	HashAlgo   hash.HashingAlgorithm
}

AccountPrivateKey is a private key associated with an account.

func DecodeAccountPrivateKey 

func DecodeAccountPrivateKey(b []byte) (AccountPrivateKey, error)

func (AccountPrivateKey) MarshalJSON 

func (a AccountPrivateKey) MarshalJSON() ([]byte, error)

func (AccountPrivateKey) PublicKey 

func (a AccountPrivateKey) PublicKey(weight int) AccountPublicKey

PublicKey returns a weighted public key.

type AccountPublicKey 

type AccountPublicKey struct {
	Index     int
	PublicKey crypto.PublicKey
	SignAlgo  crypto.SigningAlgorithm
	HashAlgo  hash.HashingAlgorithm
	SeqNumber uint64
	Weight    int
	Revoked   bool
}

AccountPublicKey is a public key associated with an account.

An account public key contains the public key, signing and hashing algorithms, and a key weight.

func DecodeAccountPublicKey 

func DecodeAccountPublicKey(b []byte, index uint64) (AccountPublicKey, error)

func DecodeRuntimeAccountPublicKey 

func DecodeRuntimeAccountPublicKey(b []byte, seqNumber uint64) (AccountPublicKey, error)

DecodeRuntimeAccountPublicKey decode bytes into AccountPublicKey but it is designed to accept byte-format used by Cadence runtime (currently same as SDK, but we don't want to keep explicit dependency on SDK)

func (AccountPublicKey) MarshalJSON 

func (a AccountPublicKey) MarshalJSON() ([]byte, error)

func (*AccountPublicKey) UnmarshalJSON 

func (a *AccountPublicKey) UnmarshalJSON(data []byte) error

func (AccountPublicKey) Validate 

func (a AccountPublicKey) Validate() error

Validate returns an error if this account key is invalid.

An account key can be invalid for the following reasons: - It specifies an incompatible signature/hash algorithm pairing - (TODO) It specifies a negative key weight

type Address 

type Address [AddressLength]byte

Address represents the 8 byte address of an account.

func BytesToAddress 

func BytesToAddress(b []byte) Address

BytesToAddress returns Address with value b.

If b is larger than 8, b will be cropped from the left. If b is smaller than 8, b will be appended by zeroes at the front.

func HexToAddress 

func HexToAddress(h string) Address

HexToAddress converts a hex string to an Address.

func (Address) Bytes 

func (a Address) Bytes() []byte

Bytes returns the byte representation of the address.

func (Address) Hex 

func (a Address) Hex() string

Hex returns the hex string representation of the address.

func (Address) HexWithPrefix 

func (a Address) HexWithPrefix() string

HexWithPrefix returns the hex string representation of the address, including the 0x prefix.

func (Address) MarshalJSON 

func (a Address) MarshalJSON() ([]byte, error)

func (Address) Short 

func (a Address) Short() string

Short returns the string representation of the address with leading zeros removed.

func (Address) String 

func (a Address) String() string

String returns the string representation of the address.

func (*Address) UnmarshalJSON 

func (a *Address) UnmarshalJSON(data []byte) error

type AddressGenerator 

type AddressGenerator interface {
	NextAddress() (Address, error)
	CurrentAddress() Address
	Bytes() []byte
	AddressCount() uint64 // returns the total number of addresses that have been generated so far
}

type AggregatedSignature added in v0.9.6 

type AggregatedSignature struct {
	// List of signatures
	VerifierSignatures []crypto.Signature
	// List of signer identifiers
	SignerIDs IdentifierList
}

AggregatedSignature contains a set of of signatures from verifiers attesting to the validity of an execution result chunk. TODO: this will be replaced with BLS aggregation

func (*AggregatedSignature) CardinalitySignerSet added in v0.19.0 

func (a *AggregatedSignature) CardinalitySignerSet() int

CardinalitySignerSet returns the number of _distinct_ signer IDs in the AggregatedSignature. We explicitly de-duplicate here to prevent repetition attacks.

func (*AggregatedSignature) HasSigner added in v0.14.0 

func (a *AggregatedSignature) HasSigner(signerID Identifier) bool

HasSigner returns true if and only if signer's signature is part of this aggregated signature

type AssignmentList 

type AssignmentList [][]Identifier

AssignmentList is a list of identifier lists. Each list of identifiers lists the identities that are part of the given cluster.

func (AssignmentList) EqualTo added in v0.19.0 

func (al AssignmentList) EqualTo(other AssignmentList) bool

type Attestation 

type Attestation struct {
	BlockID           Identifier // ID of the block included the collection
	ExecutionResultID Identifier // ID of the execution result
	ChunkIndex        uint64     // index of the approved chunk
}

Attestation confirms correctness of a chunk of an exec result

func (Attestation) ID 

func (a Attestation) ID() Identifier

ID generates a unique identifier using attestation

type Batch 

type Batch struct {
	BlockIDs []Identifier
}

Batch is a set of block IDs we want to request.

type Block 

type Block struct {
	Header  *Header
	Payload *Payload
}

Block (currently) includes the header, the payload hashes as well as the payload contents.

func Genesis 

func Genesis(chainID ChainID) *Block

func (Block) Checksum 

func (b Block) Checksum() Identifier

Checksum returns the checksum of the header.

func (Block) ID 

func (b Block) ID() Identifier

ID returns the ID of the header.

func (*Block) SetPayload 

func (b *Block) SetPayload(payload Payload)

SetPayload sets the payload and updates the payload hash.

func (Block) Valid 

func (b Block) Valid() bool

Valid will check whether the block is valid bottom-up.

type BlockEvents 

type BlockEvents struct {
	BlockID        Identifier
	BlockHeight    uint64
	BlockTimestamp time.Time
	Events         []Event
}

BlockEvents contains events emitted in a single block.

type Chain 

type Chain interface {
	NewAddressGenerator() AddressGenerator
	AddressAtIndex(index uint64) (Address, error)
	ServiceAddress() Address
	BytesToAddressGenerator(b []byte) AddressGenerator
	IsValid(Address) bool
	IndexFromAddress(address Address) (uint64, error)
	String() string
	ChainID() ChainID
	// contains filtered or unexported methods
}

Chain is the interface for address generation implementations.

type ChainID 

type ChainID string

A ChainID is a unique identifier for a specific Flow network instance.

Chain IDs are used used to prevent replay attacks and to support network-specific address generation. 

const (
	// Mainnet is the chain ID for the mainnet chain.
	Mainnet ChainID = "flow-mainnet"

	// Testnet is the chain ID for the testnet chain.
	Testnet ChainID = "flow-testnet"
	// Canary is the chain ID for internal canary chain.
	Canary ChainID = "flow-canary"

	// Benchnet is the chain ID for the transient benchmarking chain.
	Benchnet ChainID = "flow-benchnet"
	// Localnet is the chain ID for the local development chain.
	Localnet ChainID = "flow-localnet"
	// Emulator is the chain ID for the emulated chain.
	Emulator ChainID = "flow-emulator"

	// MonotonicEmulator is the chain ID for the emulated node chain with monotonic address generation.
	MonotonicEmulator ChainID = "flow-emulator-monotonic"
)

func (ChainID) Chain 

func (c ChainID) Chain() Chain

Chain returns the Chain corresponding to the string input

func (ChainID) String 

func (c ChainID) String() string

func (ChainID) Transient added in v0.20.0 

func (c ChainID) Transient() bool

Transient returns whether the chain ID is for a transient network.

type Chunk 

type Chunk struct {
	ChunkBody

	Index uint64 // chunk index inside the ER (starts from zero)
	// EndState inferred from next chunk or from the ER
	EndState StateCommitment
}

func (*Chunk) Checksum 

func (ch *Chunk) Checksum() Identifier

Checksum provides a cryptographic commitment for a chunk content

func (*Chunk) ID 

func (ch *Chunk) ID() Identifier

ID returns a unique id for this entity

type ChunkBody 

type ChunkBody struct {
	CollectionIndex uint

	// execution info
	StartState      StateCommitment // start state when starting executing this chunk
	EventCollection Identifier      // Events generated by executing results
	BlockID         Identifier      // Block id of the execution result this chunk belongs to

	// Computation consumption info
	TotalComputationUsed uint64 // total amount of computation used by running all txs in this chunk
	NumberOfTransactions uint64 // number of transactions inside the collection
}

type ChunkDataPack 

type ChunkDataPack struct {
	ChunkID    Identifier
	StartState StateCommitment
	Proof      StorageProof
	Collection *Collection
}

ChunkDataPack holds all register touches (any read, or write).

Note that we have to capture a read proof for each write before updating the registers. `Proof` includes proofs for all registers read to execute the chunck. Register proofs order must not be correlated to the order of register reads during the chunk execution in order to enforce the SPoCK secret high entropy.

func (*ChunkDataPack) Checksum 

func (c *ChunkDataPack) Checksum() Identifier

Checksum returns the checksum of the chunk data pack.

func (*ChunkDataPack) ID 

func (c *ChunkDataPack) ID() Identifier

ID returns the unique identifier for the concrete view, which is the ID of the chunk the view is for.

type ChunkList 

type ChunkList []*Chunk

TODO: This is the basic version of the list, we need to substitute it with something like Merkle tree at some point

func (ChunkList) ByChecksum 

func (cl ChunkList) ByChecksum(cs Identifier) (*Chunk, bool)

ByChecksum returns an entity from the list by entity fingerprint

func (ChunkList) ByIndex 

func (cl ChunkList) ByIndex(i uint64) (*Chunk, bool)

ByIndex returns an entity from the list by index if requested chunk is within range of list, it returns chunk and true if requested chunk is out of the range, it returns nil and false boolean return value indicates whether requested chunk is within range

func (ChunkList) Empty added in v0.15.0 

func (cl ChunkList) Empty() bool

Empty returns true if the chunk list is empty. Otherwise it returns false.

func (ChunkList) Fingerprint 

func (cl ChunkList) Fingerprint() Identifier

func (ChunkList) Indices added in v0.14.8 

func (cl ChunkList) Indices() []uint64

func (*ChunkList) Insert 

func (cl *ChunkList) Insert(ch *Chunk)

func (ChunkList) Items 

func (cl ChunkList) Items() []*Chunk

func (ChunkList) Len 

func (cl ChunkList) Len() int

Len returns the number of Chunks in the list. It is also part of the sort interface that makes ChunkList sortable

type ClusterList 

type ClusterList []IdentityList

ClusterList is a list of identity lists. Each `IdentityList` represents the nodes assigned to a specific cluster.

func NewClusterList 

func NewClusterList(assignments AssignmentList, collectors IdentityList) (ClusterList, error)

NewClusterList creates a new cluster list based on the given cluster assignment and the provided list of identities.

func (ClusterList) Assignments added in v0.15.0 

func (clusters ClusterList) Assignments() AssignmentList

Assignments returns the assignment list for a cluster.

func (ClusterList) ByIndex 

func (cl ClusterList) ByIndex(index uint) (IdentityList, bool)

ByIndex retrieves the list of identities that are part of the given cluster.

func (ClusterList) ByNodeID 

func (cl ClusterList) ByNodeID(nodeID Identifier) (IdentityList, uint, bool)

ByNodeID select the cluster that the node with the given ID is part of.

Nodes will be divided into equally sized clusters as far as possible. The last return value will indicate if the look up was successful

func (ClusterList) ByTxID 

func (cl ClusterList) ByTxID(txID Identifier) (IdentityList, bool)

ByTxID selects the cluster that should receive the transaction with the given transaction ID.

For evenly distributed transaction IDs, this will evenly distribute transactions between clusters.

func (ClusterList) IndexOf 

func (cl ClusterList) IndexOf(cluster IdentityList) (uint, bool)

IndexOf returns the index of the given cluster.

type ClusterQCVoteData added in v0.17.1 

type ClusterQCVoteData struct {
	SigData  crypto.Signature // the aggregated signature over all the votes
	VoterIDs []Identifier     // the set of voters that contributed to the qc
}

ClusterQCVoteData represents the votes for a cluster quorum certificate, as gathered by the ClusterQC smart contract. It contains the aggregated signature over the root block for the cluster as well as the set of voters.

func ClusterQCVoteDataFromQC added in v0.17.1 

func ClusterQCVoteDataFromQC(qc *QuorumCertificate) ClusterQCVoteData

ClusterQCVoteDataFromQC converts a quorum certificate to the representation used by the smart contract, essentially discarding the block ID and view (which are protocol-defined given the EpochSetup event).

func ClusterQCVoteDatasFromQCs added in v0.17.1 

func ClusterQCVoteDatasFromQCs(qcs []*QuorumCertificate) []ClusterQCVoteData

func (*ClusterQCVoteData) EqualTo added in v0.19.0 

func (c *ClusterQCVoteData) EqualTo(other *ClusterQCVoteData) bool

type Collection 

type Collection struct {
	Transactions []*TransactionBody
}

Collection is set of transactions.

func CollectionFromTransactions 

func CollectionFromTransactions(transactions []*Transaction) Collection

CollectionFromTransactions creates a new collection from the list of transactions.

func (Collection) Checksum 

func (c Collection) Checksum() Identifier

func (Collection) Fingerprint 

func (c Collection) Fingerprint() []byte

func (*Collection) Guarantee 

func (c *Collection) Guarantee() CollectionGuarantee

Guarantee returns a collection guarantee for this collection.

func (Collection) ID 

func (c Collection) ID() Identifier

func (Collection) Len 

func (c Collection) Len() int

func (Collection) Light 

func (c Collection) Light() LightCollection

Light returns the light, reference-only version of the collection.

type CollectionGuarantee 

type CollectionGuarantee struct {
	CollectionID     Identifier       // ID of the collection being guaranteed
	ReferenceBlockID Identifier       // defines expiry of the collection
	SignerIDs        []Identifier     // list of guarantors
	Signature        crypto.Signature // guarantor signatures
}

CollectionGuarantee is a signed hash for a collection, which is used to announce collections to consensus nodes.

func (*CollectionGuarantee) Checksum 

func (cg *CollectionGuarantee) Checksum() Identifier

Checksum returns a checksum of the collection guarantee including the signatures.

func (*CollectionGuarantee) ID 

func (cg *CollectionGuarantee) ID() Identifier

ID returns the fingerprint of the collection guarantee.

type CollectionList 

type CollectionList struct {
	// contains filtered or unexported fields
}

Note that this is the basic version of the List, we need to substitute it with something like Merkle tree at some point

func (*CollectionList) ByChecksum 

func (cl *CollectionList) ByChecksum(cs Identifier) (*Collection, bool)

ByChecksum returns an entity from the list by entity fingerprint

func (*CollectionList) ByIndex 

func (cl *CollectionList) ByIndex(i uint64) *Collection

ByIndex returns an entity from the list by index

func (*CollectionList) ByIndexWithProof 

func (cl *CollectionList) ByIndexWithProof(i uint64) (*Collection, Proof)

ByIndexWithProof returns an entity from the list by index and proof of membership

func (*CollectionList) Fingerprint 

func (cl *CollectionList) Fingerprint() Identifier

func (*CollectionList) Insert 

func (cl *CollectionList) Insert(ch *Collection)

func (*CollectionList) Items 

func (cl *CollectionList) Items() []*Collection

type DKGParticipant 

type DKGParticipant struct {
	Index    uint
	KeyShare crypto.PublicKey
}

func (DKGParticipant) EncodeRLP 

func (part DKGParticipant) EncodeRLP(w io.Writer) error

func (DKGParticipant) MarshalCBOR added in v0.21.0 

func (part DKGParticipant) MarshalCBOR() ([]byte, error)

func (DKGParticipant) MarshalJSON 

func (part DKGParticipant) MarshalJSON() ([]byte, error)

func (DKGParticipant) MarshalMsgpack 

func (part DKGParticipant) MarshalMsgpack() ([]byte, error)

func (*DKGParticipant) UnmarshalCBOR added in v0.21.0 

func (part *DKGParticipant) UnmarshalCBOR(b []byte) error

func (*DKGParticipant) UnmarshalJSON 

func (part *DKGParticipant) UnmarshalJSON(b []byte) error

func (*DKGParticipant) UnmarshalMsgpack 

func (part *DKGParticipant) UnmarshalMsgpack(b []byte) error

type Entity 

type Entity interface {

	// ID returns a unique id for this entity using a hash of the immutable
	// fields of the entity.
	ID() Identifier

	// Checksum returns a unique checksum for the entity, including the mutable
	// data such as signatures.
	Checksum() Identifier
}

Entity defines how flow entities should be defined Entities are flat data structures holding multiple data fields. Entities don't include nested entities, they only include pointers to other entities. For example, they keep a slice of entity commits instead of keeping a slice of entity object itself. This simplifies storage, signature and validation of entities.

type EntityList 

type EntityList interface {
	EntitySet

	// HasIndex checks if the list has an entity at the given index.
	HasIndex(i uint) bool

	// ByIndex returns an entity from the list by index
	ByIndex(i uint) (Entity, bool)

	// ByIndexWithProof returns an entity from the list by index and proof of membership
	ByIndexWithProof(i uint) (Entity, Proof, bool)
}

EntityList is a list of entities of the same type

type EntitySet 

type EntitySet interface {

	// Insert adds an entity to the data structure.
	Insert(Entity) bool

	// Remove removes an entity from the data structure.
	Remove(Entity) bool

	// Items returns all items of the collection.
	Items() []Entity

	// Size returns the number of entities in the data structure.
	Size() uint

	// Fingerprint returns a unique identifier for all entities of the data
	// structure.
	Fingerprint() Identifier

	// ByID returns the entity with the given fingerprint.
	ByID(id Identifier) (Entity, bool)

	// if the set has an specific member providing proof of membership
	ByIDWithProof(id Identifier) (bool, Proof, error)
}

EntitySet holds a set of entities (order doesn't matter)

type EpochCommit 

type EpochCommit struct {
	Counter            uint64              // the number of the epoch
	ClusterQCs         []ClusterQCVoteData // quorum certificates for each cluster
	DKGGroupKey        crypto.PublicKey    // group key from DKG
	DKGParticipantKeys []crypto.PublicKey  // public keys for DKG participants
}

EpochCommit is a service event emitted when epoch setup has been completed. When an EpochCommit event is emitted, the network is ready to transition to the epoch.

func (*EpochCommit) EncodeRLP 

func (commit *EpochCommit) EncodeRLP(w io.Writer) error

EncodeRLP encodes the commit as RLP. The RLP encoding needs to be handled differently from JSON/msgpack, because it does not handle custom encoders within map types. NOTE: DecodeRLP is not needed, as this is only used for hashing.

func (*EpochCommit) EqualTo added in v0.19.0 

func (commit *EpochCommit) EqualTo(other *EpochCommit) bool

func (*EpochCommit) ID 

func (commit *EpochCommit) ID() Identifier

ID returns the hash of the event contents.

func (*EpochCommit) MarshalCBOR added in v0.21.0 

func (commit *EpochCommit) MarshalCBOR() ([]byte, error)

func (EpochCommit) MarshalJSON 

func (commit EpochCommit) MarshalJSON() ([]byte, error)

func (*EpochCommit) MarshalMsgpack 

func (commit *EpochCommit) MarshalMsgpack() ([]byte, error)

func (*EpochCommit) ServiceEvent 

func (commit *EpochCommit) ServiceEvent() ServiceEvent

func (*EpochCommit) UnmarshalCBOR added in v0.21.0 

func (commit *EpochCommit) UnmarshalCBOR(b []byte) error

func (*EpochCommit) UnmarshalJSON 

func (commit *EpochCommit) UnmarshalJSON(b []byte) error

func (*EpochCommit) UnmarshalMsgpack 

func (commit *EpochCommit) UnmarshalMsgpack(b []byte) error

type EpochPhase 

type EpochPhase int

EpochPhase represents a phase of the Epoch Preparation Protocol. The phase of an epoch is resolved based on a block reference and is fork-dependent. An epoch begins in the staking phase, then transitions to the setup phase in the block containing the EpochSetup service event, then to the committed phase in the block containing the EpochCommit service event. |<-- EpochPhaseStaking -->|<-- EpochPhaseSetup -->|<-- EpochPhaseCommitted -->|<-- EpochPhaseStaking -->... |<------------------------------- Epoch N ------------------------------------>|<-- Epoch N + 1 --... 

const (
	EpochPhaseUndefined EpochPhase = iota
	EpochPhaseStaking
	EpochPhaseSetup
	EpochPhaseCommitted
)

func (EpochPhase) String 

func (p EpochPhase) String() string

type EpochSetup 

type EpochSetup struct {
	Counter            uint64         // the number of the epoch
	FirstView          uint64         // the first view of the epoch
	DKGPhase1FinalView uint64         // the final view of DKG phase 1
	DKGPhase2FinalView uint64         // the final view of DKG phase 2
	DKGPhase3FinalView uint64         // the final view of DKG phase 3
	FinalView          uint64         // the final view of the epoch
	Participants       IdentityList   // all participants of the epoch
	Assignments        AssignmentList // cluster assignment for the epoch
	RandomSource       []byte         // source of randomness for epoch-specific setup tasks
}

EpochSetup is a service event emitted when the network is ready to set up for the upcoming epoch. It contains the participants in the epoch, the length, the cluster assignment, and the seed for leader selection.

func (*EpochSetup) EqualTo added in v0.19.0 

func (setup *EpochSetup) EqualTo(other *EpochSetup) bool

func (*EpochSetup) ID 

func (setup *EpochSetup) ID() Identifier

ID returns the hash of the event contents.

func (*EpochSetup) ServiceEvent 

func (setup *EpochSetup) ServiceEvent() ServiceEvent

type EpochStatus 

type EpochStatus struct {
	PreviousEpoch EventIDs // EpochSetup and EpochCommit events for the previous epoch
	CurrentEpoch  EventIDs // EpochSetup and EpochCommit events for the current epoch
	NextEpoch     EventIDs // EpochSetup and EpochCommit events for the next epoch
}

EpochStatus represents the status of the current and next epoch with respect to a reference block. Concretely, it contains the IDs for all relevant service events emitted as of the reference block. Events not yet emitted are represented by ZeroID.

func NewEpochStatus 

func NewEpochStatus(previousSetup, previousCommit, currentSetup, currentCommit, nextSetup, nextCommit Identifier) (*EpochStatus, error)

func (*EpochStatus) Check added in v0.15.0 

func (es *EpochStatus) Check() error

Check checks that the status is well-formed, returning an error if it is not.

func (*EpochStatus) Copy added in v0.21.1 

func (es *EpochStatus) Copy() *EpochStatus

Copy returns a copy of the epoch status.

func (*EpochStatus) HasPrevious added in v0.15.0 

func (es *EpochStatus) HasPrevious() bool

func (*EpochStatus) Phase 

func (es *EpochStatus) Phase() (EpochPhase, error)

Phase returns the phase for the CURRENT epoch, given this epoch status.

type Event 

type Event struct {
	// Type is the qualified event type.
	Type EventType
	// TransactionID is the ID of the transaction this event was emitted from.
	TransactionID Identifier
	// TransactionIndex defines the index of the transaction this event was emitted from within the block.
	// The first transaction has index 0, the second has index 1, and so on.
	TransactionIndex uint32
	// EventIndex defines the ordering of events in a transaction.
	// The first event emitted has index 0, the second has index 1, and so on.
	EventIndex uint32
	// Payload contains the encoded event data.
	Payload []byte
}

func (Event) Checksum added in v0.21.0 

func (e Event) Checksum() Identifier

func (Event) Encode 

func (e Event) Encode() []byte

Encode returns the canonical encoding of this event, containing only the fields necessary to uniquely identify it.

func (Event) Fingerprint 

func (e Event) Fingerprint() []byte

func (Event) ID 

func (e Event) ID() Identifier

ID returns a canonical identifier that is guaranteed to be unique.

func (Event) String 

func (e Event) String() string

String returns the string representation of this event.

type EventIDs 

type EventIDs struct {
	// SetupID is the ID of the EpochSetup event for the respective Epoch
	SetupID Identifier
	// CommitID is the ID of the EpochCommit event for the respective Epoch
	CommitID Identifier
}

EventIDs is a container for IDs of epoch service events.

type EventType 

type EventType string
const (
	EventAccountCreated EventType = "flow.AccountCreated"
	EventAccountUpdated EventType = "flow.AccountUpdated"
)

List of built-in event types.

type EventsList added in v0.19.0 

type EventsList []Event

type ExecutedTransaction 

type ExecutedTransaction struct {
	Tx         *Transaction
	GasSpent   uint64
	MaxGas     uint64
	StartState StateCommitment
	EndState   StateCommitment
}

ExecutedTransaction are generated by computer and pass to chunker

type ExecutionReceipt 

type ExecutionReceipt struct {
	ExecutorID        Identifier
	ExecutionResult   ExecutionResult
	Spocks            []crypto.Signature
	ExecutorSignature crypto.Signature
}

ExecutionReceipt is the full execution receipt, as sent by the Execution Node. Specifically, it contains the detailed execution result.

func ExecutionReceiptFromMeta 

func ExecutionReceiptFromMeta(meta ExecutionReceiptMeta, result ExecutionResult) *ExecutionReceipt

func (*ExecutionReceipt) Checksum 

func (er *ExecutionReceipt) Checksum() Identifier

Checksum returns a checksum for the execution receipt including the signatures.

func (*ExecutionReceipt) ID 

func (er *ExecutionReceipt) ID() Identifier

ID returns the canonical ID of the execution receipt.

func (*ExecutionReceipt) Meta 

func (er *ExecutionReceipt) Meta() *ExecutionReceiptMeta

Meta returns the receipt metadata for the receipt.

type ExecutionReceiptGroupedList added in v0.15.0 

type ExecutionReceiptGroupedList map[Identifier]ExecutionReceiptList

ExecutionReceiptGroupedList is a partition of an ExecutionReceiptList

func (ExecutionReceiptGroupedList) GetGroup added in v0.15.0 

func (g ExecutionReceiptGroupedList) GetGroup(groupID Identifier) ExecutionReceiptList

GetGroup returns the receipts that were mapped to the same identifier by the grouping function. Returns an empty (nil) ExecutionReceiptList if groupID does not exist.

func (ExecutionReceiptGroupedList) NumberGroups added in v0.15.0 

func (g ExecutionReceiptGroupedList) NumberGroups() int

NumberGroups returns the number of groups

type ExecutionReceiptGroupingFunction added in v0.15.0 

type ExecutionReceiptGroupingFunction func(*ExecutionReceipt) Identifier

ExecutionReceiptGroupingFunction is a function that assigns an identifier to each receipt

type ExecutionReceiptList added in v0.15.0 

type ExecutionReceiptList []*ExecutionReceipt

ExecutionReceiptList is a slice of ExecutionReceipts with the additional functionality to group receipts by various properties

func (ExecutionReceiptList) GroupBy added in v0.15.0 

func (l ExecutionReceiptList) GroupBy(grouper ExecutionReceiptGroupingFunction) ExecutionReceiptGroupedList

GroupBy partitions the ExecutionReceiptList. All receipts that are mapped by the grouping function to the same identifier are placed in the same group. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptList) GroupByExecutorID added in v0.15.0 

func (l ExecutionReceiptList) GroupByExecutorID() ExecutionReceiptGroupedList

GroupByExecutorID partitions the ExecutionReceiptList by the receipts' ExecutorIDs. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptList) GroupByResultID added in v0.15.0 

func (l ExecutionReceiptList) GroupByResultID() ExecutionReceiptGroupedList

GroupByResultID partitions the ExecutionReceiptList by the receipts' Result IDs. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptList) Size added in v0.15.0 

func (l ExecutionReceiptList) Size() int

Size returns the number of receipts in the list

type ExecutionReceiptMeta 

type ExecutionReceiptMeta struct {
	ExecutorID        Identifier
	ResultID          Identifier
	Spocks            []crypto.Signature
	ExecutorSignature crypto.Signature
}

ExecutionReceiptMeta contains the fields from the Execution Receipts that vary from one executor to another (assuming they commit to the same result). It only contains the ID (cryptographic hash) of the execution result the receipt commits to. The ExecutionReceiptMeta is useful for storing results and receipts separately in a composable way.

func (*ExecutionReceiptMeta) Checksum added in v0.16.0 

func (er *ExecutionReceiptMeta) Checksum() Identifier

Checksum returns a checksum for the execution receipt including the signatures.

func (*ExecutionReceiptMeta) ID added in v0.16.0 

func (er *ExecutionReceiptMeta) ID() Identifier

ID returns the canonical ID of the execution receipt. It is identical to the ID of the full receipt.

func (ExecutionReceiptMeta) MarshalJSON added in v0.23.2 

func (er ExecutionReceiptMeta) MarshalJSON() ([]byte, error)

type ExecutionReceiptMetaGroupedList added in v0.16.1 

type ExecutionReceiptMetaGroupedList map[Identifier]ExecutionReceiptMetaList

ExecutionReceiptMetaGroupedList is a partition of an ExecutionReceiptMetaList

func (ExecutionReceiptMetaGroupedList) GetGroup added in v0.16.1 

func (g ExecutionReceiptMetaGroupedList) GetGroup(groupID Identifier) ExecutionReceiptMetaList

GetGroup returns the receipts that were mapped to the same identifier by the grouping function. Returns an empty (nil) ExecutionReceiptMetaList if groupID does not exist.

func (ExecutionReceiptMetaGroupedList) NumberGroups added in v0.16.1 

func (g ExecutionReceiptMetaGroupedList) NumberGroups() int

NumberGroups returns the number of groups

type ExecutionReceiptMetaGroupingFunction added in v0.16.1 

type ExecutionReceiptMetaGroupingFunction func(*ExecutionReceiptMeta) Identifier

ExecutionReceiptMetaGroupingFunction is a function that assigns an identifier to each receipt meta

type ExecutionReceiptMetaList added in v0.16.1 

type ExecutionReceiptMetaList []*ExecutionReceiptMeta

ExecutionReceiptMetaList is a slice of ExecutionResultMetas with the additional functionality to group them by various properties

func (ExecutionReceiptMetaList) GroupBy added in v0.16.1 

func (l ExecutionReceiptMetaList) GroupBy(grouper ExecutionReceiptMetaGroupingFunction) ExecutionReceiptMetaGroupedList

GroupBy partitions the ExecutionReceiptMetaList. All receipts that are mapped by the grouping function to the same identifier are placed in the same group. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptMetaList) GroupByExecutorID added in v0.16.1 

func (l ExecutionReceiptMetaList) GroupByExecutorID() ExecutionReceiptMetaGroupedList

GroupByExecutorID partitions the ExecutionReceiptMetaList by the receipts' ExecutorIDs. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptMetaList) GroupByResultID added in v0.16.1 

func (l ExecutionReceiptMetaList) GroupByResultID() ExecutionReceiptMetaGroupedList

GroupByResultID partitions the ExecutionReceiptMetaList by the receipts' Result IDs. Within each group, the order and multiplicity of the receipts is preserved.

func (ExecutionReceiptMetaList) Lookup added in v0.16.1 

func (l ExecutionReceiptMetaList) Lookup() map[Identifier]*ExecutionReceiptMeta

Lookup generates a map from ExecutionReceipt ID to ExecutionReceiptMeta

func (ExecutionReceiptMetaList) Size added in v0.16.1 

func (l ExecutionReceiptMetaList) Size() int

Size returns the number of receipts in the list

type ExecutionResult 

type ExecutionResult struct {
	PreviousResultID Identifier // commit of the previous ER
	BlockID          Identifier // commit of the current block
	Chunks           ChunkList
	ServiceEvents    ServiceEventList
}

ExecutionResult is cryptographic commitment to the computation result(s) from executing a block

func (ExecutionResult) Checksum 

func (er ExecutionResult) Checksum() Identifier

Checksum ...

func (ExecutionResult) FinalStateCommitment added in v0.11.0 

func (er ExecutionResult) FinalStateCommitment() (StateCommitment, error)

FinalStateCommitment returns the Execution Result's commitment to the final execution state of the block, i.e. the last chunk's output state. Error returns:

  • NoChunksError: if there are no chunks (ExecutionResult is malformed)

func (ExecutionResult) ID 

func (er ExecutionResult) ID() Identifier

ID returns the hash of the execution result body

func (ExecutionResult) InitialStateCommit added in v0.11.0 

func (er ExecutionResult) InitialStateCommit() (StateCommitment, error)

InitialStateCommit returns a commitment to the execution state used as input for computing the block the block, i.e. the leading chunk's input state. Error returns:

  • NoChunksError: if there are no chunks (ExecutionResult is malformed)

func (ExecutionResult) MarshalJSON added in v0.23.2 

func (er ExecutionResult) MarshalJSON() ([]byte, error)

func (ExecutionResult) ValidateChunksLength added in v0.17.0 

func (er ExecutionResult) ValidateChunksLength() bool

ValidateChunksLength checks whether the number of chuncks is zero.

It returns false if the number of chunks is zero (invalid). By protocol definition, each ExecutionReceipt must contain at least one chunk (system chunk).

type ExecutionResultGroupedList added in v0.16.1 

type ExecutionResultGroupedList map[Identifier]ExecutionResultList

ExecutionResultGroupedList is a partition of an ExecutionResultList

func (ExecutionResultGroupedList) GetGroup added in v0.16.1 

func (g ExecutionResultGroupedList) GetGroup(groupID Identifier) ExecutionResultList

GetGroup returns the ExecutionResults that were mapped to the same identifier by the grouping function. Returns an empty (nil) ExecutionResultList if groupID does not exist.

func (ExecutionResultGroupedList) NumberGroups added in v0.16.1 

func (g ExecutionResultGroupedList) NumberGroups() int

NumberGroups returns the number of groups

type ExecutionResultGroupingFunction added in v0.16.1 

type ExecutionResultGroupingFunction func(*ExecutionResult) Identifier

ExecutionResultGroupingFunction is a function that assigns an identifier to each ExecutionResult

type ExecutionResultList added in v0.16.1 

type ExecutionResultList []*ExecutionResult

ExecutionResultList is a slice of ExecutionResults with the additional functionality to group them by various properties

func (ExecutionResultList) GroupBy added in v0.16.1 

func (l ExecutionResultList) GroupBy(grouper ExecutionResultGroupingFunction) ExecutionResultGroupedList

GroupBy partitions the ExecutionResultList. All ExecutionResults that are mapped by the grouping function to the same identifier are placed in the same group. Within each group, the order and multiplicity of the ExecutionResults is preserved.

func (ExecutionResultList) GroupByExecutedBlockID added in v0.16.1 

func (l ExecutionResultList) GroupByExecutedBlockID() ExecutionResultGroupedList

GroupByExecutedBlockID partitions the ExecutionResultList by the IDs of the executed blocks. Within each group, the order and multiplicity of the ExecutionResults is preserved.

func (ExecutionResultList) GroupByPreviousResultID added in v0.16.1 

func (l ExecutionResultList) GroupByPreviousResultID() ExecutionResultGroupedList

GroupByPreviousResultID partitions the ExecutionResultList by the their PreviousResultIDs. Within each group, the order and multiplicity of the ExecutionResults is preserved.

func (ExecutionResultList) Lookup added in v0.16.1 

func (l ExecutionResultList) Lookup() map[Identifier]*ExecutionResult

Lookup generates a map from ExecutionResult ID to ExecutionResult

func (ExecutionResultList) Size added in v0.16.1 

func (l ExecutionResultList) Size() int

Size returns the number of ExecutionResults in the list 

type Header struct {
	ChainID ChainID // ChainID is a chain-specific value to prevent replay attacks.

	ParentID Identifier // ParentID is the ID of this block's parent.

	Height uint64 // Height is the height of the parent + 1

	PayloadHash Identifier // PayloadHash is a hash of the payload of this block.

	Timestamp time.Time // Timestamp is the time at which this block was proposed.

	View uint64 // View is the view number at which this block was proposed.

	ParentVoterIDs []Identifier // List of voters who signed the parent block.

	ParentVoterSigData []byte // aggregated signature over the parent block. Not a single cryptographic

	ProposerID Identifier // proposer identifier for the block

	ProposerSigData []byte // signature of the proposer over the new block. Not a single cryptographic

}

Header contains all meta-data for a block, as well as a hash representing the combined payload of the entire block. It is what consensus nodes agree on after validating the contents against the payload hash.

func (Header) Body 

func (h Header) Body() interface{}

Body returns the immutable part of the block header.

func (Header) Checksum 

func (h Header) Checksum() Identifier

Checksum returns the checksum of the header.

func (Header) Fingerprint 

func (h Header) Fingerprint() []byte

func (Header) ID 

func (h Header) ID() Identifier

ID returns a unique ID to singularly identify the header and its block within the flow system.

func (Header) MarshalCBOR added in v0.21.0 

func (h Header) MarshalCBOR() ([]byte, error)

MarshalCBOR makes sure the timestamp is encoded in UTC.

func (Header) MarshalJSON 

func (h Header) MarshalJSON() ([]byte, error)

MarshalJSON makes sure the timestamp is encoded in UTC.

func (Header) MarshalMsgpack 

func (h Header) MarshalMsgpack() ([]byte, error)

MarshalMsgpack makes sure the timestamp is encoded in UTC.

func (*Header) UnmarshalCBOR added in v0.21.0 

func (h *Header) UnmarshalCBOR(data []byte) error

UnmarshalCBOR makes sure the timestamp is decoded in UTC.

func (*Header) UnmarshalJSON 

func (h *Header) UnmarshalJSON(data []byte) error

UnmarshalJSON makes sure the timestamp is decoded in UTC.

func (*Header) UnmarshalMsgpack 

func (h *Header) UnmarshalMsgpack(data []byte) error

UnmarshalMsgpack makes sure the timestamp is decoded in UTC.

type Identifier 

type Identifier [IdentifierLen]byte

Identifier represents a 32-byte unique identifier for an entity.

func ConcatSum 

func ConcatSum(ids ...Identifier) Identifier

func EventsListHash added in v0.19.0 

func EventsListHash(el EventsList) (Identifier, error)

EventsListHash calculates a hash of events list, by simply hashing byte representation of events in the lists

func GetIDs 

func GetIDs(value interface{}) []Identifier

GetIDs gets the IDs for a slice of entities.

func HashToID 

func HashToID(hash []byte) Identifier

func HexStringToIdentifier 

func HexStringToIdentifier(hexString string) (Identifier, error)

HexStringToIdentifier converts a hex string to an identifier. The input must be 64 characters long and contain only valid hex characters.

func MakeID 

func MakeID(entity interface{}) Identifier

MakeID creates an ID from a hash of encoded data. MakeID uses `model.Fingerprint() []byte` to get the byte representation of the entity, which uses RLP to encode the data. If the input defines its own canonical encoding by implementing Fingerprinter, it uses that instead. That allows removal of non-unique fields from structs or overwriting of the used encoder. We are using Fingerprint instead of the default encoding for two reasons: a) JSON (the default encoding) does not specify an order for the elements of arrays and objects, which could lead to different hashes depending on the JSON implementation and b) the Fingerprinter interface allows to exclude fields not needed in the pre-image of the hash that comprises the Identifier, which could be different from the encoding for sending entities in messages or for storing them.

func MerkleRoot 

func MerkleRoot(ids ...Identifier) Identifier

func MustHexStringToIdentifier added in v0.19.0 

func MustHexStringToIdentifier(hexString string) Identifier

func PublicKeyToID 

func PublicKeyToID(pk crypto.PublicKey) (Identifier, error)

PublicKeyToID creates an ID from a public key.

func Sample 

func Sample(size uint, ids ...Identifier) []Identifier

Sample returns random sample of length 'size' of the ids [Fisher-Yates shuffle](https://en.wikipedia.org/wiki/Fisher–Yates_shuffle).

func (Identifier) Format 

func (id Identifier) Format(state fmt.State, verb rune)

Format handles formatting of id for different verbs. This is called when formatting an identifier with fmt.

func (Identifier) IsSampled added in v0.22.0 

func (id Identifier) IsSampled(sensitivity uint) bool

IsSampled is a utility method to sample entities based on their ids the range is from [0, 64]. 0 is 100% (all data will be collected) 32 is ~50% 64 is ~0% (no data will be collected)

func (Identifier) MarshalText 

func (id Identifier) MarshalText() ([]byte, error)

func (Identifier) String 

func (id Identifier) String() string

String returns the hex string representation of the identifier.

func (*Identifier) UnmarshalText 

func (id *Identifier) UnmarshalText(text []byte) error

type IdentifierFilter added in v0.14.0 

type IdentifierFilter func(Identifier) bool

IdentifierFilter is a filter on identifiers.

type IdentifierList 

type IdentifierList []Identifier

IdentifierList defines a sortable list of identifiers

func (IdentifierList) Contains added in v0.17.0 

func (il IdentifierList) Contains(target Identifier) bool

Contains returns whether this identifier list contains the target identifier.

func (IdentifierList) Copy added in v0.17.1 

func (il IdentifierList) Copy() IdentifierList

func (IdentifierList) DeterministicSample added in v0.21.1 

func (il IdentifierList) DeterministicSample(size uint, seed int64) IdentifierList

DeterministicSample returns deterministic random sample from the `IdentifierList` using the given seed

func (IdentifierList) Filter added in v0.21.0 

func (il IdentifierList) Filter(filter IdentifierFilter) IdentifierList

Filter will apply a filter to the identifier list.

func (IdentifierList) Len 

func (il IdentifierList) Len() int

Len returns length of the IdentiferList in the number of stored identifiers. It satisfies the sort.Interface making the IdentifierList sortable.

func (IdentifierList) Less 

func (il IdentifierList) Less(i, j int) bool

Less returns true if element i in the IdentifierList is less than j based on its identifier. Otherwise it returns true. It satisfies the sort.Interface making the IdentifierList sortable.

func (IdentifierList) Lookup added in v0.17.1 

func (il IdentifierList) Lookup() map[Identifier]struct{}

Lookup converts the Identifiers to a lookup table.

func (IdentifierList) Sample added in v0.21.0 

func (il IdentifierList) Sample(size uint) IdentifierList

Sample returns random sample of length 'size' of the ids [Fisher-Yates shuffle](https://en.wikipedia.org/wiki/Fisher–Yates_shuffle).

func (IdentifierList) Strings added in v0.13.0 

func (il IdentifierList) Strings() []string

func (IdentifierList) Swap 

func (il IdentifierList) Swap(i, j int)

Swap swaps the element i and j in the IdentifierList. It satisfies the sort.Interface making the IdentifierList sortable.

func (IdentifierList) Union added in v0.21.1 

func (il IdentifierList) Union(other IdentifierList) IdentifierList

Union returns a new identifier list containing the union of `il` and `other`. There are no duplicates in the output.

type Identity 

type Identity struct {
	// NodeID uniquely identifies a particular node. A node's ID is fixed for
	// the duration of that node's participation in the network.
	NodeID  Identifier
	Address string
	Role    Role
	// Stake represents the node's *weight*. The stake (quantity of $FLOW held
	// in escrow during the node's participation) is strictly managed by the
	// service account. The protocol software strictly considers weight, which
	// represents how much voting power a given node has.
	//
	// NOTE: Nodes that are registered for an upcoming epoch, or that are in
	// the process of un-staking, have 0 weight.
	//
	// TODO: to be renamed to Weight
	Stake uint64
	// Ejected represents whether a node has been permanently removed from the
	// network. A node may be ejected for either:
	// * committing one protocol felony
	// * committing a series of protocol misdemeanours
	Ejected       bool
	StakingPubKey crypto.PublicKey
	NetworkPubKey crypto.PublicKey
}

Identity represents a node identity.

func ParseIdentity 

func ParseIdentity(identity string) (*Identity, error)

ParseIdentity parses a string representation of an identity.

func (Identity) Checksum 

func (iy Identity) Checksum() Identifier

Checksum returns a checksum for the identity including mutable attributes.

func (Identity) EncodeRLP added in v0.17.0 

func (iy Identity) EncodeRLP(w io.Writer) error

func (*Identity) EqualTo added in v0.19.0 

func (iy *Identity) EqualTo(other *Identity) bool

func (Identity) ID 

func (iy Identity) ID() Identifier

ID returns a unique identifier for the identity.

func (Identity) MarshalCBOR added in v0.21.0 

func (iy Identity) MarshalCBOR() ([]byte, error)

func (Identity) MarshalJSON 

func (iy Identity) MarshalJSON() ([]byte, error)

func (Identity) MarshalMsgpack 

func (iy Identity) MarshalMsgpack() ([]byte, error)

func (Identity) String 

func (iy Identity) String() string

String returns a string representation of the identity.

func (*Identity) UnmarshalCBOR added in v0.21.0 

func (iy *Identity) UnmarshalCBOR(b []byte) error

func (*Identity) UnmarshalJSON 

func (iy *Identity) UnmarshalJSON(b []byte) error

func (*Identity) UnmarshalMsgpack 

func (iy *Identity) UnmarshalMsgpack(b []byte) error

type IdentityFilter 

type IdentityFilter func(*Identity) bool

IdentityFilter is a filter on identities.

type IdentityList 

type IdentityList []*Identity

IdentityList is a list of nodes.

func (IdentityList) ByIndex 

func (il IdentityList) ByIndex(index uint) (*Identity, bool)

ByIndex returns the node at the given index.

func (IdentityList) ByNetworkingKey added in v0.21.1 

func (il IdentityList) ByNetworkingKey(key crypto.PublicKey) (*Identity, bool)

ByNetworkingKey gets a node from the list by network public key.

func (IdentityList) ByNodeID 

func (il IdentityList) ByNodeID(nodeID Identifier) (*Identity, bool)

ByNodeID gets a node from the list by node ID.

func (IdentityList) Copy added in v0.12.0 

func (il IdentityList) Copy() IdentityList

Copy returns a copy of the receiver. The resulting slice uses a different backing array, meaning appends and insert operations on either slice are guaranteed to only affect that slice.

Copy should be used when modifying an existing identity list by either appending new elements, re-ordering, or inserting new elements in an existing index.

func (IdentityList) Count 

func (il IdentityList) Count() uint

Count returns the count of identities.

func (IdentityList) DeterministicSample 

func (il IdentityList) DeterministicSample(size uint, seed int64) IdentityList

DeterministicSample returns deterministic random sample from the `IdentityList` using the given seed

func (IdentityList) DeterministicShuffle added in v0.16.1 

func (il IdentityList) DeterministicShuffle(seed int64) IdentityList

DeterministicShuffle randomly and deterministically shuffles the identity list, returning the shuffled list without modifying the receiver.

func (IdentityList) EqualTo added in v0.19.0 

func (il IdentityList) EqualTo(other IdentityList) bool

EqualTo checks if the other list if the same, that it contains the same elements in the same order

func (IdentityList) Filter 

func (il IdentityList) Filter(filter IdentityFilter) IdentityList

Filter will apply a filter to the identity list.

func (IdentityList) Fingerprint 

func (il IdentityList) Fingerprint() Identifier

func (IdentityList) Lookup added in v0.12.0 

func (il IdentityList) Lookup() map[Identifier]*Identity

func (IdentityList) Map added in v0.12.0 

func (il IdentityList) Map(f IdentityMapFunc) IdentityList

Map returns a new identity list with the map function f applied to a copy of each identity.

CAUTION: this relies on structure copy semantics. Map functions that modify an object referenced by the input Identity structure will modify identities in the source slice as well.

func (IdentityList) NodeIDs 

func (il IdentityList) NodeIDs() []Identifier

NodeIDs returns the NodeIDs of the nodes in the list.

func (IdentityList) Sample 

func (il IdentityList) Sample(size uint) IdentityList

Sample returns simple random sample from the `IdentityList`

func (IdentityList) SamplePct 

func (il IdentityList) SamplePct(pct float64) IdentityList

SamplePct returns a random sample from the receiver identity list. The sample contains `pct` percentage of the list. The sample is rounded up if `pct>0`, so this will always select at least one identity.

NOTE: The input must be between 0-1.

func (IdentityList) Selector 

func (il IdentityList) Selector() IdentityFilter

Selector returns an identity filter function that selects only identities within this identity list.

func (IdentityList) Sort added in v0.17.0 

func (il IdentityList) Sort(less IdentityOrder) IdentityList

Sort will sort the list using the given ordering.

func (IdentityList) Sorted added in v0.17.0 

func (il IdentityList) Sorted(less IdentityOrder) bool

Sorted returns whether the list is sorted by the input ordering.

func (IdentityList) TotalStake 

func (il IdentityList) TotalStake() uint64

TotalStake returns the total stake of all given identities.

func (IdentityList) Union added in v0.10.1 

func (il IdentityList) Union(other IdentityList) IdentityList

Union returns a new identity list containing every identity that occurs in either `il`, or `other`, or both. There are no duplicates in the output, where duplicates are identities with the same node ID.

type IdentityMapFunc added in v0.12.0 

type IdentityMapFunc func(Identity) Identity

IdentityMapFunc is a modifier function for map operations for identities. Identities are COPIED from the source slice.

type IdentityOrder 

type IdentityOrder func(*Identity, *Identity) bool

IdentityOrder is a sort for identities.

type IncorporatedResult added in v0.11.0 

type IncorporatedResult struct {
	// IncorporatedBlockID is the ID of the first block on its fork where a
	// receipt for this result was incorporated. Within a fork, multiple blocks
	// may contain receipts for the same result; only the first one is used to
	// compute the random beacon of the result's chunk assignment.
	IncorporatedBlockID Identifier

	// Result is the ExecutionResult contained in the ExecutionReceipt that was
	// incorporated in the payload of IncorporatedBlockID.
	Result *ExecutionResult
}

IncorporatedResult is a wrapper around an ExecutionResult which contains the ID of the first block on its fork in which it was incorporated.

func NewIncorporatedResult added in v0.11.0 

func NewIncorporatedResult(incorporatedBlockID Identifier, result *ExecutionResult) *IncorporatedResult

func (*IncorporatedResult) Checksum added in v0.11.0 

func (ir *IncorporatedResult) Checksum() Identifier

CheckSum implements flow.Entity.CheckSum for IncorporatedResult to make it capable of being stored directly in mempools and storage.

func (*IncorporatedResult) ID added in v0.11.0 

func (ir *IncorporatedResult) ID() Identifier

ID implements flow.Entity.ID for IncorporatedResult to make it capable of being stored directly in mempools and storage.

type IncorporatedResultGroupedList added in v0.15.0 

type IncorporatedResultGroupedList map[Identifier]IncorporatedResultList

IncorporatedResultGroupedList is a partition of an IncorporatedResultList

func (IncorporatedResultGroupedList) GetGroup added in v0.15.0 

func (g IncorporatedResultGroupedList) GetGroup(groupID Identifier) IncorporatedResultList

GetGroup returns the IncorporatedResults that were mapped to the same identifier by the grouping function. Returns an empty (nil) IncorporatedResultList if groupID does not exist.

func (IncorporatedResultGroupedList) NumberGroups added in v0.15.0 

func (g IncorporatedResultGroupedList) NumberGroups() int

NumberGroups returns the number of groups

type IncorporatedResultGroupingFunction added in v0.15.0 

type IncorporatedResultGroupingFunction func(*IncorporatedResult) Identifier

IncorporatedResultGroupingFunction is a function that assigns an identifier to each IncorporatedResult

type IncorporatedResultList added in v0.15.0 

type IncorporatedResultList []*IncorporatedResult

IncorporatedResultList is a slice of IncorporatedResults with the additional functionality to group them by various properties

func (IncorporatedResultList) GroupBy added in v0.15.0 

func (l IncorporatedResultList) GroupBy(grouper IncorporatedResultGroupingFunction) IncorporatedResultGroupedList

GroupBy partitions the IncorporatedResultList. All IncorporatedResults that are mapped by the grouping function to the same identifier are placed in the same group. Within each group, the order and multiplicity of the IncorporatedResults is preserved.

func (IncorporatedResultList) GroupByExecutedBlockID added in v0.15.0 

func (l IncorporatedResultList) GroupByExecutedBlockID() IncorporatedResultGroupedList

GroupByExecutedBlockID partitions the IncorporatedResultList by the IDs of the executed blocks. Within each group, the order and multiplicity of the IncorporatedResults is preserved.

func (IncorporatedResultList) GroupByIncorporatedBlockID added in v0.15.0 

func (l IncorporatedResultList) GroupByIncorporatedBlockID() IncorporatedResultGroupedList

GroupByIncorporatedBlockID partitions the IncorporatedResultList by the ID of the block that incorporates the result. Within each group, the order and multiplicity of the IncorporatedResults is preserved.

func (IncorporatedResultList) GroupByResultID added in v0.15.0 

func (l IncorporatedResultList) GroupByResultID() IncorporatedResultGroupedList

GroupByResultID partitions the IncorporatedResultList by the Results' IDs. Within each group, the order and multiplicity of the IncorporatedResults is preserved.

func (IncorporatedResultList) Size added in v0.15.0 

func (l IncorporatedResultList) Size() int

Size returns the number of IncorporatedResults in the list

type IncorporatedResultSeal added in v0.11.0 

type IncorporatedResultSeal struct {
	// IncorporatedResult is the incorporated result (result + ID of block where
	// it was incorporated) that the seal is for.
	IncorporatedResult *IncorporatedResult

	// Seal is a seal for the result contained in IncorporatedResult.
	Seal *Seal

	// the header of the executed block
	// useful for indexing the seal by height in the mempool in order for fast pruning
	Header *Header
}

IncorporatedResultSeal is a wrapper around a seal that keeps track of which IncorporatedResult the seal corresponds to. Sealing is a function of result And the ID of the block in which the result was incorporated, which is all contained in IncorporatedResult.

func (*IncorporatedResultSeal) Checksum added in v0.11.0 

func (s *IncorporatedResultSeal) Checksum() Identifier

CheckSum implements flow.Entity.CheckSum for IncorporatedResultSeal to make it capable of being stored directly in mempools and storage.

func (*IncorporatedResultSeal) ID added in v0.11.0 

func (s *IncorporatedResultSeal) ID() Identifier

ID implements flow.Entity.ID for IncorporatedResultSeal to make it capable of being stored directly in mempools and storage.

type Index 

type Index struct {
	CollectionIDs []Identifier
	SealIDs       []Identifier
	ReceiptIDs    []Identifier
	ResultIDs     []Identifier
}

type LightCollection 

type LightCollection struct {
	Transactions []Identifier
}

LightCollection is a collection containing references to the constituent transactions rather than full transaction bodies. It is used for indexing transactions by collection and for computing the collection fingerprint.

func (LightCollection) Checksum 

func (lc LightCollection) Checksum() Identifier

func (LightCollection) Has 

func (lc LightCollection) Has(txID Identifier) bool

func (LightCollection) ID 

func (lc LightCollection) ID() Identifier

func (LightCollection) Len 

func (lc LightCollection) Len() int

type MonotonicAddressGenerator 

type MonotonicAddressGenerator struct {
	// contains filtered or unexported fields
}

func (*MonotonicAddressGenerator) AddressCount added in v0.18.3 

func (gen *MonotonicAddressGenerator) AddressCount() uint64

AddressCount returns the total number of addresses generated so far

func (*MonotonicAddressGenerator) Bytes 

func (gen *MonotonicAddressGenerator) Bytes() []byte

Bytes converts an address index into a slice of bytes

func (*MonotonicAddressGenerator) CurrentAddress 

func (gen *MonotonicAddressGenerator) CurrentAddress() Address

CurrentAddress returns the address corresponding to the internal index.

func (*MonotonicAddressGenerator) NextAddress 

func (gen *MonotonicAddressGenerator) NextAddress() (Address, error)

NextAddress increments the internal index and generates the new address corresponding to the new index.

type Payload 

type Payload struct {
	Guarantees []*CollectionGuarantee
	Seals      []*Seal
	Receipts   ExecutionReceiptMetaList
	Results    ExecutionResultList
}

Payload is the actual content of each block.

func EmptyPayload added in v0.12.0 

func EmptyPayload() Payload

EmptyPayload returns an empty block payload.

func (Payload) Hash 

func (p Payload) Hash() Identifier

Hash returns the root hash of the payload.

func (Payload) Index 

func (p Payload) Index() *Index

Index returns the index for the payload.

func (Payload) MarshalJSON added in v0.15.0 

func (p Payload) MarshalJSON() ([]byte, error)

MarshalJSON defines the JSON marshalling for block payloads. Enforce a consistent representation for empty slices.

type PendingBlock 

type PendingBlock struct {
	OriginID Identifier
	Header   *Header
	Payload  *Payload
}

PendingBlock is a wrapper type representing a block that cannot yet be processed. The block header, payload, and sender ID are stored together while waiting for the block to become processable.

type Proof 

type Proof []byte

Proof contains proof that an entity is part of a EntityList

type ProposalKey 

type ProposalKey struct {
	Address        Address
	KeyIndex       uint64
	SequenceNumber uint64
}

A ProposalKey is the key that specifies the proposal key and sequence number for a transaction.

func (ProposalKey) ByteSize added in v0.11.0 

func (p ProposalKey) ByteSize() int

ByteSize returns the byte size of the proposal key

type QuorumCertificate 

type QuorumCertificate struct {
	View      uint64
	BlockID   Identifier
	SignerIDs []Identifier
	SigData   []byte
}

QuorumCertificate represents a quorum certificate for a block proposal as defined in the HotStuff algorithm. A quorum certificate is a collection of votes for a particular block proposal. Valid quorum certificates contain signatures from a super-majority of consensus committee members.

type Range 

type Range struct {
	From uint64
	To   uint64
}

Range is a height range for which we want to request blocks.

type RegisterEntries added in v0.10.0 

type RegisterEntries []RegisterEntry

handy container for sorting

func (RegisterEntries) IDs added in v0.10.0 

func (d RegisterEntries) IDs() []RegisterID

func (RegisterEntries) Len added in v0.10.0 

func (d RegisterEntries) Len() int

func (RegisterEntries) Less added in v0.10.0 

func (d RegisterEntries) Less(i, j int) bool

func (RegisterEntries) Swap added in v0.10.0 

func (d RegisterEntries) Swap(i, j int)

func (RegisterEntries) Values added in v0.10.0 

func (d RegisterEntries) Values() []RegisterValue

type RegisterEntry added in v0.10.0 

type RegisterEntry struct {
	Key   RegisterID
	Value RegisterValue
}

type RegisterID 

type RegisterID struct {
	Owner      string
	Controller string
	Key        string
}

func NewRegisterID added in v0.10.0 

func NewRegisterID(owner, controller, key string) RegisterID

func (*RegisterID) Bytes added in v0.19.0 

func (r *RegisterID) Bytes() []byte

Bytes returns a bytes representation of the RegisterID.

The encoding uses the injective fingerprint module.

func (*RegisterID) String added in v0.10.0 

func (r *RegisterID) String() string

type RegisterValue 

type RegisterValue = []byte

RegisterValue (value part of Register)

type ResultApproval 

type ResultApproval struct {
	Body              ResultApprovalBody
	VerifierSignature crypto.Signature // signature over all above fields
}

ResultApproval includes an approval for a chunk, verified by a verification node

func (ResultApproval) Checksum 

func (ra ResultApproval) Checksum() Identifier

Checksum generates checksum using the result approval full content

func (ResultApproval) ID 

func (ra ResultApproval) ID() Identifier

ID generates a unique identifier using result approval body

type ResultApprovalBody 

type ResultApprovalBody struct {
	Attestation
	ApproverID           Identifier       // node id generating this result approval
	AttestationSignature crypto.Signature // signature over attestation, this has been separated for BLS aggregation
	Spock                crypto.Signature // proof of re-computation, one per each chunk
}

ResultApprovalBody holds body part of a result approval

func (ResultApprovalBody) ID 

func (rab ResultApprovalBody) ID() Identifier

ID generates a unique identifier using ResultApprovalBody

func (ResultApprovalBody) PartialID added in v0.17.1 

func (rab ResultApprovalBody) PartialID() Identifier

PartialID generates a unique identifier using Attestation + ApproverID

type Role 

type Role uint8

Role represents a role in the flow system. 

const (
	RoleCollection   Role = 1
	RoleConsensus    Role = 2
	RoleExecution    Role = 3
	RoleVerification Role = 4
	RoleAccess       Role = 5
)

Enumeration of the available flow node roles.

func ParseRole 

func ParseRole(role string) (Role, error)

ParseRole will parse a role from string.

func (Role) MarshalText 

func (r Role) MarshalText() ([]byte, error)

func (Role) String 

func (r Role) String() string

String returns a string version of role.

func (*Role) UnmarshalText 

func (r *Role) UnmarshalText(text []byte) error

func (Role) Valid added in v0.19.0 

func (r Role) Valid() bool

type RoleList added in v0.12.0 

type RoleList []Role

RoleList defines a slice of roles in flow system.

func Roles 

func Roles() RoleList

func (RoleList) Contains added in v0.12.0 

func (r RoleList) Contains(role Role) bool

Contains returns true if RoleList contains the role, otherwise false.

func (RoleList) ID added in v0.14.0 

func (r RoleList) ID() Identifier

ID returns hash of the content of RoleList. It first sorts the RoleList and then takes its hash value.

func (RoleList) Len added in v0.14.0 

func (r RoleList) Len() int

Len returns length of the RoleList in the number of stored roles. It satisfies the sort.Interface making the RoleList sortable.

func (RoleList) Less added in v0.14.0 

func (r RoleList) Less(i, j int) bool

Less returns true if element i in the RoleList is less than j based on the numerical value of its role. Otherwise it returns true. It satisfies the sort.Interface making the RoleList sortable.

func (RoleList) Swap added in v0.14.0 

func (r RoleList) Swap(i, j int)

Swap swaps the element i and j in the RoleList. It satisfies the sort.Interface making the RoleList sortable.

func (RoleList) Union added in v0.12.0 

func (r RoleList) Union(other RoleList) RoleList

Union returns a new role list containing every role that occurs in either `r`, or `other`, or both. There are no duplicate roles in the output,

type Seal 

type Seal struct {
	BlockID                Identifier
	ResultID               Identifier
	FinalState             StateCommitment
	AggregatedApprovalSigs []AggregatedSignature // one AggregatedSignature per chunk

	// Service Events are copied from the Execution Result. Therefore, repeating the
	// the service events here opens the possibility for a data-inconsistency attack.
	// It is _not_ necessary to repeat the ServiceEvents here, as an Execution Result
	// must be incorporated into the fork before it can be sealed.
	// TODO: include ServiceEvents in Execution Result and remove from Seal
	ServiceEvents []ServiceEvent
}

A Seal is produced when an Execution Result (referenced by `ResultID`) for particular block (referenced by `BlockID`) is committed into the chain. A Seal for a block B can be included in the payload B's descendants. Only in the respective fork where the seal for B is included, the referenced result is considered committed. Different forks might contain different seals for the same result (or in edge cases, even for different results).

NOTES (1) As Seals are (currently) included in the payload, they are not strictly entities. (Entities can be sent between nodes as self-contained messages whose integrity is protected by a signature). By itself, a seal does _not_ contain enough information to determine its validity (verifier assignment cannot be computed) and its integrity is not protected by a signature of a node that is authorized to generate it. A seal should only be processed in the context of the block, which contains it.

(2) Even though seals are not strictly entities, they still implement the Entity interface. This allows us to store and retrieve seals individually. CAUTION: As seals are part of the block payload, their _exact_ content must be preserved by the storage system. This includes the exact list of approval signatures (incl. order). While it is possible to construct different valid seals for the same result (using different subsets of assigned verifiers), they cannot be treated as equivalent for the following reason:

  • Swapping a seal in a block with a different once changes the binary representation of the block payload containing the seal.
  • Changing the binary block representation would invalidate the block proposer's signature.

Therefore, to retrieve valid blocks from storage, it is required that the Seal.ID includes all fields with independent degrees of freedom (such as AggregatedApprovalSigs).

func (Seal) Body 

func (s Seal) Body() interface{}

func (Seal) Checksum 

func (s Seal) Checksum() Identifier

func (Seal) ID 

func (s Seal) ID() Identifier

func (Seal) MarshalJSON added in v0.23.2 

func (s Seal) MarshalJSON() ([]byte, error)

type SealingSegment added in v0.23.2 

type SealingSegment struct {
	// Blocks the chain segment blocks
	Blocks []*Block

	// Due to decoupling of execution receipts it's possible that blocks from sealing segment will be referring
	// execution results incorporated in blocks that aren't part of the segment.
	// ExecutionResults will contain those results.
	ExecutionResults ExecutionResultList
}

SealingSegment is the chain segment such that the last block (greatest height) is this snapshot's reference block and the first (least height) is the most recently sealed block as of this snapshot (ie. the block referenced by LatestSeal). In other words, the last block contains a seal for the first block. For instance: 

A <- B <- C <- D <- E (seal_A)

The above sealing segment's last block (E) has a seal for block A, which is the first block of the sealing segment.

It is guaranteed there are at least 2 blocks in a SealingSegment The segment is in ascending height order.

func (*SealingSegment) Highest added in v0.23.2 

func (segment *SealingSegment) Highest() *Block

func (*SealingSegment) Lowest added in v0.23.2 

func (segment *SealingSegment) Lowest() *Block

type SealingSegmentBuilder added in v0.23.2 

type SealingSegmentBuilder struct {
	// contains filtered or unexported fields
}

func NewSealingSegmentBuilder added in v0.23.2 

func NewSealingSegmentBuilder(resultLookup func(resultID Identifier) (*ExecutionResult, error)) *SealingSegmentBuilder

NewSealingSegmentBuilder returns *SealingSegmentBuilder

func (*SealingSegmentBuilder) AddBlock added in v0.23.2 

func (builder *SealingSegmentBuilder) AddBlock(block *Block) error

AddBlock appends block to blocks

func (*SealingSegmentBuilder) SealingSegment added in v0.23.2 

func (builder *SealingSegmentBuilder) SealingSegment() (*SealingSegment, error)

SealingSegment will check if the highest block has a seal for the lowest block in the segment

type ServiceEvent 

type ServiceEvent struct {
	Type  string
	Event interface{}
}

ServiceEvent represents a service event, which is a special event that when emitted from a service account smart contract, is propagated to the protocol and included in blocks. Service events typically cause changes to the protocol state. See EpochSetup and EpochCommit events in this package for examples.

This type represents a generic service event and primarily exists to simplify encoding and decoding.

func (*ServiceEvent) EqualTo added in v0.19.0 

func (se *ServiceEvent) EqualTo(other *ServiceEvent) (bool, error)

func (*ServiceEvent) UnmarshalCBOR added in v0.21.0 

func (se *ServiceEvent) UnmarshalCBOR(b []byte) error

func (*ServiceEvent) UnmarshalJSON 

func (se *ServiceEvent) UnmarshalJSON(b []byte) error

func (*ServiceEvent) UnmarshalMsgpack added in v0.14.0 

func (se *ServiceEvent) UnmarshalMsgpack(b []byte) error

type ServiceEventList added in v0.19.0 

type ServiceEventList []ServiceEvent

ServiceEventList is a handy container to enable comparisons

func (ServiceEventList) EqualTo added in v0.19.0 

func (sel ServiceEventList) EqualTo(other ServiceEventList) (bool, error)

type Spock 

type Spock []byte

type StateCommitment 

type StateCommitment hash.Hash

StateCommitment holds the root hash of the tree (Snapshot) TODO: solve the circular dependency and define StateCommitment as ledger.State

func ToStateCommitment added in v0.17.0 

func ToStateCommitment(stateBytes []byte) (StateCommitment, error)

ToStateCommitment converts a byte slice into a StateComitment. It returns an error if the slice has an invalid length.

func (StateCommitment) MarshalJSON added in v0.23.2 

func (s StateCommitment) MarshalJSON() ([]byte, error)

func (*StateCommitment) UnmarshalJSON added in v0.23.2 

func (s *StateCommitment) UnmarshalJSON(data []byte) error

type StorageProof 

type StorageProof = []byte

StorageProof (proof of a read or update to the state, Merkle path of some sort)

type Transaction 

type Transaction struct {
	TransactionBody
	Status           TransactionStatus
	Events           []Event
	ComputationSpent uint64
	StartState       StateCommitment
	EndState         StateCommitment
}

Transaction is the smallest unit of task.

func (*Transaction) Checksum 

func (tx *Transaction) Checksum() Identifier

Checksum provides a cryptographic commitment for a chunk content

func (*Transaction) PayloadMessage 

func (tx *Transaction) PayloadMessage() []byte

func (*Transaction) String 

func (tx *Transaction) String() string

type TransactionBody 

type TransactionBody struct {

	// A reference to a previous block
	// A transaction is expired after specific number of blocks (defined by network) counting from this block
	// for example, if block reference is pointing to a block with height of X and network limit is 10,
	// a block with x+10 height is the last block that is allowed to include this transaction.
	// user can adjust this reference to older blocks if he/she wants to make tx expire faster
	ReferenceBlockID Identifier

	// the transaction script as UTF-8 encoded Cadence source code
	Script []byte

	// arguments passed to the Cadence transaction
	Arguments [][]byte

	// Max amount of computation which is allowed to be done during this transaction
	GasLimit uint64

	// Account key used to propose the transaction
	ProposalKey ProposalKey

	// Account that pays for this transaction fees
	Payer Address

	// A ordered (ascending) list of addresses that scripts will touch their assets (including payer address)
	// Accounts listed here all have to provide signatures
	// Each account might provide multiple signatures (sum of weight should be at least 1)
	// If code touches accounts that is not listed here, tx fails
	Authorizers []Address

	// List of account signatures excluding signature of the payer account
	PayloadSignatures []TransactionSignature

	// payer signature over the envelope (payload + payload signatures)
	EnvelopeSignatures []TransactionSignature
}

TransactionBody includes the main contents of a transaction

func NewTransactionBody 

func NewTransactionBody() *TransactionBody

NewTransactionBody initializes and returns an empty transaction body

func (*TransactionBody) AddArgument 

func (tb *TransactionBody) AddArgument(arg []byte) *TransactionBody

AddArgument adds an argument to the Cadence arguments list for this transaction.

func (*TransactionBody) AddAuthorizer 

func (tb *TransactionBody) AddAuthorizer(address Address) *TransactionBody

AddAuthorizer adds an authorizer account to this transaction.

func (*TransactionBody) AddEnvelopeSignature 

func (tb *TransactionBody) AddEnvelopeSignature(address Address, keyID uint64, sig []byte) *TransactionBody

AddEnvelopeSignature adds an envelope signature to the transaction for the given address and key ID.

func (*TransactionBody) AddPayloadSignature 

func (tb *TransactionBody) AddPayloadSignature(address Address, keyID uint64, sig []byte) *TransactionBody

AddPayloadSignature adds a payload signature to the transaction for the given address and key ID.

func (TransactionBody) ByteSize added in v0.11.0 

func (tb TransactionBody) ByteSize() uint

func (TransactionBody) Checksum 

func (tb TransactionBody) Checksum() Identifier

func (*TransactionBody) EnvelopeMessage 

func (tb *TransactionBody) EnvelopeMessage() []byte

EnvelopeMessage returns the signable message for transaction envelope.

This message is only signed by the payer account.

func (TransactionBody) Fingerprint 

func (tb TransactionBody) Fingerprint() []byte

func (TransactionBody) ID 

func (tb TransactionBody) ID() Identifier

func (*TransactionBody) MissingFields 

func (tb *TransactionBody) MissingFields() []string

MissingFields checks if a transaction is missing any required fields and returns those that are missing.

func (*TransactionBody) PayloadMessage 

func (tb *TransactionBody) PayloadMessage() []byte

func (*TransactionBody) SetArguments 

func (tb *TransactionBody) SetArguments(args [][]byte) *TransactionBody

SetArguments sets the Cadence arguments list for this transaction.

func (*TransactionBody) SetGasLimit 

func (tb *TransactionBody) SetGasLimit(limit uint64) *TransactionBody

SetGasLimit sets the gas limit for this transaction.

func (*TransactionBody) SetPayer 

func (tb *TransactionBody) SetPayer(address Address) *TransactionBody

SetPayer sets the payer account for this transaction.

func (*TransactionBody) SetProposalKey 

func (tb *TransactionBody) SetProposalKey(address Address, keyID uint64, sequenceNum uint64) *TransactionBody

SetProposalKey sets the proposal key and sequence number for this transaction.

The first two arguments specify the account key to be used, and the last argument is the sequence number being declared.

func (*TransactionBody) SetReferenceBlockID 

func (tb *TransactionBody) SetReferenceBlockID(blockID Identifier) *TransactionBody

SetReferenceBlockID sets the reference block ID for this transaction.

func (*TransactionBody) SetScript 

func (tb *TransactionBody) SetScript(script []byte) *TransactionBody

SetScript sets the Cadence script for this transaction.

func (*TransactionBody) SignEnvelope 

func (tb *TransactionBody) SignEnvelope(
	address Address,
	keyID uint64,
	privateKey crypto.PrivateKey,
	hasher hash.Hasher,
) error

SignEnvelope signs the full transaction (TransactionDomainTag + payload + payload signatures) with the specified account key using the default transaction domain tag.

The resulting signature is combined with the account address and key ID before being added to the transaction.

This function returns an error if the signature cannot be generated.

func (*TransactionBody) SignMessageWithTag added in v0.16.1 

func (tb *TransactionBody) SignMessageWithTag(
	message []byte,
	tag []byte,
	privateKey crypto.PrivateKey,
	hasher hash.Hasher,
) ([]byte, error)

SignMessageWithTag signs the message (tag + message) with the specified account key.

This function returns an error if the signature cannot be generated.

func (*TransactionBody) SignPayload 

func (tb *TransactionBody) SignPayload(
	address Address,
	keyID uint64,
	privateKey crypto.PrivateKey,
	hasher hash.Hasher,
) error

SignPayload signs the transaction payload (TransactionDomainTag + payload) with the specified account key using the default transaction domain tag.

The resulting signature is combined with the account address and key ID before being added to the transaction.

This function returns an error if the signature cannot be generated.

type TransactionField 

type TransactionField int

TransactionField represents a required transaction field. 

const (
	TransactionFieldUnknown TransactionField = iota
	TransactionFieldScript
	TransactionFieldRefBlockID
	TransactionFieldPayer
)

func (TransactionField) String 

func (f TransactionField) String() string

String returns the string representation of a transaction field.

type TransactionResult 

type TransactionResult struct {
	// TransactionID is the ID of the transaction this error was emitted from.
	TransactionID Identifier
	// ErrorMessage contains the error message of any error that may have occurred when the transaction was executed
	ErrorMessage string
	// Computation used
	ComputationUsed uint64
}

TransactionResult contains the artifacts generated after executing a Cadence transaction.

func (*TransactionResult) Checksum 

func (te *TransactionResult) Checksum() Identifier

func (TransactionResult) ID 

func (t TransactionResult) ID() Identifier

ID returns a canonical identifier that is guaranteed to be unique.

func (TransactionResult) String 

func (t TransactionResult) String() string

String returns the string representation of this error.

type TransactionSignature 

type TransactionSignature struct {
	Address     Address
	SignerIndex int
	KeyIndex    uint64
	Signature   []byte
}

A TransactionSignature is a signature associated with a specific account key.

func (TransactionSignature) ByteSize added in v0.11.0 

func (s TransactionSignature) ByteSize() int

ByteSize returns the byte size of the transaction signature

func (TransactionSignature) Fingerprint 

func (s TransactionSignature) Fingerprint() []byte

func (TransactionSignature) String added in v0.12.0 

func (s TransactionSignature) String() string

String returns the string representation of a transaction signature.

func (TransactionSignature) UniqueKeyString added in v0.18.4 

func (s TransactionSignature) UniqueKeyString() string

UniqueKeyString returns constructs an string with combination of address and key

type TransactionStatus 

type TransactionStatus int

TransactionStatus represents the status of a transaction. 

const (
	// TransactionStatusUnknown indicates that the transaction status is not known.
	TransactionStatusUnknown TransactionStatus = iota
	// TransactionStatusPending is the status of a pending transaction.
	TransactionStatusPending
	// TransactionStatusFinalized is the status of a finalized transaction.
	TransactionStatusFinalized
	// TransactionStatusExecuted is the status of an executed transaction.
	TransactionStatusExecuted
	// TransactionStatusSealed is the status of a sealed transaction.
	TransactionStatusSealed
	// TransactionStatusExpired is the status of an expired transaction.
	TransactionStatusExpired
)

func (TransactionStatus) String 

func (s TransactionStatus) String() string

String returns the string representation of a transaction status.

type TransactionTiming 

type TransactionTiming struct {
	TransactionID Identifier
	Received      time.Time
	Finalized     time.Time
	Executed      time.Time
}

TransactionTiming is used to track the timing/durations of a transaction through the system

func (TransactionTiming) Checksum 

func (t TransactionTiming) Checksum() Identifier

func (TransactionTiming) ID 

func (t TransactionTiming) ID() Identifier

Source Files

View all Source files

Directories

Path Synopsis
id
(c) 2021 Dapper Labs - ALL RIGHTS RESERVED
 (c) 2021 Dapper Labs - ALL RIGHTS RESERVED

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.