codecommit

package
v1.8.10 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 6, 2017 License: Apache-2.0 Imports: 9 Imported by: 0

Documentation

Overview

Package codecommit provides a client for AWS CodeCommit.

Index

Examples

Constants

View Source 
const (
	// ChangeTypeEnumA is a ChangeTypeEnum enum value
	ChangeTypeEnumA = "A"

	// ChangeTypeEnumM is a ChangeTypeEnum enum value
	ChangeTypeEnumM = "M"

	// ChangeTypeEnumD is a ChangeTypeEnum enum value
	ChangeTypeEnumD = "D"
)
View Source 
const (
	// OrderEnumAscending is a OrderEnum enum value
	OrderEnumAscending = "ascending"

	// OrderEnumDescending is a OrderEnum enum value
	OrderEnumDescending = "descending"
)
View Source 
const (
	// RepositoryTriggerEventEnumAll is a RepositoryTriggerEventEnum enum value
	RepositoryTriggerEventEnumAll = "all"

	// RepositoryTriggerEventEnumUpdateReference is a RepositoryTriggerEventEnum enum value
	RepositoryTriggerEventEnumUpdateReference = "updateReference"

	// RepositoryTriggerEventEnumCreateReference is a RepositoryTriggerEventEnum enum value
	RepositoryTriggerEventEnumCreateReference = "createReference"

	// RepositoryTriggerEventEnumDeleteReference is a RepositoryTriggerEventEnum enum value
	RepositoryTriggerEventEnumDeleteReference = "deleteReference"
)
View Source 
const (
	// SortByEnumRepositoryName is a SortByEnum enum value
	SortByEnumRepositoryName = "repositoryName"

	// SortByEnumLastModifiedDate is a SortByEnum enum value
	SortByEnumLastModifiedDate = "lastModifiedDate"
)
View Source 
const (

	// ErrCodeBlobIdDoesNotExistException for service response error code
	// "BlobIdDoesNotExistException".
	//
	// The specified blob does not exist.
	ErrCodeBlobIdDoesNotExistException = "BlobIdDoesNotExistException"

	// ErrCodeBlobIdRequiredException for service response error code
	// "BlobIdRequiredException".
	//
	// A blob ID is required but was not specified.
	ErrCodeBlobIdRequiredException = "BlobIdRequiredException"

	// ErrCodeBranchDoesNotExistException for service response error code
	// "BranchDoesNotExistException".
	//
	// The specified branch does not exist.
	ErrCodeBranchDoesNotExistException = "BranchDoesNotExistException"

	// ErrCodeBranchNameExistsException for service response error code
	// "BranchNameExistsException".
	//
	// The specified branch name already exists.
	ErrCodeBranchNameExistsException = "BranchNameExistsException"

	// ErrCodeBranchNameRequiredException for service response error code
	// "BranchNameRequiredException".
	//
	// A branch name is required but was not specified.
	ErrCodeBranchNameRequiredException = "BranchNameRequiredException"

	// ErrCodeCommitDoesNotExistException for service response error code
	// "CommitDoesNotExistException".
	//
	// The specified commit does not exist or no commit was specified, and the specified
	// repository has no default branch.
	ErrCodeCommitDoesNotExistException = "CommitDoesNotExistException"

	// ErrCodeCommitIdDoesNotExistException for service response error code
	// "CommitIdDoesNotExistException".
	//
	// The specified commit ID does not exist.
	ErrCodeCommitIdDoesNotExistException = "CommitIdDoesNotExistException"

	// ErrCodeCommitIdRequiredException for service response error code
	// "CommitIdRequiredException".
	//
	// A commit ID was not specified.
	ErrCodeCommitIdRequiredException = "CommitIdRequiredException"

	// ErrCodeCommitRequiredException for service response error code
	// "CommitRequiredException".
	//
	// A commit was not specified.
	ErrCodeCommitRequiredException = "CommitRequiredException"

	// ErrCodeEncryptionIntegrityChecksFailedException for service response error code
	// "EncryptionIntegrityChecksFailedException".
	//
	// An encryption integrity check failed.
	ErrCodeEncryptionIntegrityChecksFailedException = "EncryptionIntegrityChecksFailedException"

	// ErrCodeEncryptionKeyAccessDeniedException for service response error code
	// "EncryptionKeyAccessDeniedException".
	//
	// An encryption key could not be accessed.
	ErrCodeEncryptionKeyAccessDeniedException = "EncryptionKeyAccessDeniedException"

	// ErrCodeEncryptionKeyDisabledException for service response error code
	// "EncryptionKeyDisabledException".
	//
	// The encryption key is disabled.
	ErrCodeEncryptionKeyDisabledException = "EncryptionKeyDisabledException"

	// ErrCodeEncryptionKeyNotFoundException for service response error code
	// "EncryptionKeyNotFoundException".
	//
	// No encryption key was found.
	ErrCodeEncryptionKeyNotFoundException = "EncryptionKeyNotFoundException"

	// ErrCodeEncryptionKeyUnavailableException for service response error code
	// "EncryptionKeyUnavailableException".
	//
	// The encryption key is not available.
	ErrCodeEncryptionKeyUnavailableException = "EncryptionKeyUnavailableException"

	// ErrCodeFileTooLargeException for service response error code
	// "FileTooLargeException".
	//
	// The specified file exceeds the file size limit for AWS CodeCommit. For more
	// information about limits in AWS CodeCommit, see AWS CodeCommit User Guide
	// (http://docs.aws.amazon.com/codecommit/latest/userguide/limits.html).
	ErrCodeFileTooLargeException = "FileTooLargeException"

	// ErrCodeInvalidBlobIdException for service response error code
	// "InvalidBlobIdException".
	//
	// The specified blob is not valid.
	ErrCodeInvalidBlobIdException = "InvalidBlobIdException"

	// ErrCodeInvalidBranchNameException for service response error code
	// "InvalidBranchNameException".
	//
	// The specified branch name is not valid.
	ErrCodeInvalidBranchNameException = "InvalidBranchNameException"

	// ErrCodeInvalidCommitException for service response error code
	// "InvalidCommitException".
	//
	// The specified commit is not valid.
	ErrCodeInvalidCommitException = "InvalidCommitException"

	// ErrCodeInvalidCommitIdException for service response error code
	// "InvalidCommitIdException".
	//
	// The specified commit ID is not valid.
	ErrCodeInvalidCommitIdException = "InvalidCommitIdException"

	// ErrCodeInvalidContinuationTokenException for service response error code
	// "InvalidContinuationTokenException".
	//
	// The specified continuation token is not valid.
	ErrCodeInvalidContinuationTokenException = "InvalidContinuationTokenException"

	// ErrCodeInvalidMaxResultsException for service response error code
	// "InvalidMaxResultsException".
	//
	// The specified number of maximum results is not valid.
	ErrCodeInvalidMaxResultsException = "InvalidMaxResultsException"

	// ErrCodeInvalidOrderException for service response error code
	// "InvalidOrderException".
	//
	// The specified sort order is not valid.
	ErrCodeInvalidOrderException = "InvalidOrderException"

	// ErrCodeInvalidPathException for service response error code
	// "InvalidPathException".
	//
	// The specified path is not valid.
	ErrCodeInvalidPathException = "InvalidPathException"

	// ErrCodeInvalidRepositoryDescriptionException for service response error code
	// "InvalidRepositoryDescriptionException".
	//
	// The specified repository description is not valid.
	ErrCodeInvalidRepositoryDescriptionException = "InvalidRepositoryDescriptionException"

	// ErrCodeInvalidRepositoryNameException for service response error code
	// "InvalidRepositoryNameException".
	//
	// At least one specified repository name is not valid.
	//
	// This exception only occurs when a specified repository name is not valid.
	// Other exceptions occur when a required repository parameter is missing, or
	// when a specified repository does not exist.
	ErrCodeInvalidRepositoryNameException = "InvalidRepositoryNameException"

	// ErrCodeInvalidRepositoryTriggerBranchNameException for service response error code
	// "InvalidRepositoryTriggerBranchNameException".
	//
	// One or more branch names specified for the trigger is not valid.
	ErrCodeInvalidRepositoryTriggerBranchNameException = "InvalidRepositoryTriggerBranchNameException"

	// ErrCodeInvalidRepositoryTriggerCustomDataException for service response error code
	// "InvalidRepositoryTriggerCustomDataException".
	//
	// The custom data provided for the trigger is not valid.
	ErrCodeInvalidRepositoryTriggerCustomDataException = "InvalidRepositoryTriggerCustomDataException"

	// ErrCodeInvalidRepositoryTriggerDestinationArnException for service response error code
	// "InvalidRepositoryTriggerDestinationArnException".
	//
	// The Amazon Resource Name (ARN) for the trigger is not valid for the specified
	// destination. The most common reason for this error is that the ARN does not
	// meet the requirements for the service type.
	ErrCodeInvalidRepositoryTriggerDestinationArnException = "InvalidRepositoryTriggerDestinationArnException"

	// ErrCodeInvalidRepositoryTriggerEventsException for service response error code
	// "InvalidRepositoryTriggerEventsException".
	//
	// One or more events specified for the trigger is not valid. Check to make
	// sure that all events specified match the requirements for allowed events.
	ErrCodeInvalidRepositoryTriggerEventsException = "InvalidRepositoryTriggerEventsException"

	// ErrCodeInvalidRepositoryTriggerNameException for service response error code
	// "InvalidRepositoryTriggerNameException".
	//
	// The name of the trigger is not valid.
	ErrCodeInvalidRepositoryTriggerNameException = "InvalidRepositoryTriggerNameException"

	// ErrCodeInvalidRepositoryTriggerRegionException for service response error code
	// "InvalidRepositoryTriggerRegionException".
	//
	// The region for the trigger target does not match the region for the repository.
	// Triggers must be created in the same region as the target for the trigger.
	ErrCodeInvalidRepositoryTriggerRegionException = "InvalidRepositoryTriggerRegionException"

	// ErrCodeInvalidSortByException for service response error code
	// "InvalidSortByException".
	//
	// The specified sort by value is not valid.
	ErrCodeInvalidSortByException = "InvalidSortByException"

	// ErrCodeMaximumBranchesExceededException for service response error code
	// "MaximumBranchesExceededException".
	//
	// The number of branches for the trigger was exceeded.
	ErrCodeMaximumBranchesExceededException = "MaximumBranchesExceededException"

	// ErrCodeMaximumRepositoryNamesExceededException for service response error code
	// "MaximumRepositoryNamesExceededException".
	//
	// The maximum number of allowed repository names was exceeded. Currently, this
	// number is 25.
	ErrCodeMaximumRepositoryNamesExceededException = "MaximumRepositoryNamesExceededException"

	// ErrCodeMaximumRepositoryTriggersExceededException for service response error code
	// "MaximumRepositoryTriggersExceededException".
	//
	// The number of triggers allowed for the repository was exceeded.
	ErrCodeMaximumRepositoryTriggersExceededException = "MaximumRepositoryTriggersExceededException"

	// ErrCodePathDoesNotExistException for service response error code
	// "PathDoesNotExistException".
	//
	// The specified path does not exist.
	ErrCodePathDoesNotExistException = "PathDoesNotExistException"

	// ErrCodeRepositoryDoesNotExistException for service response error code
	// "RepositoryDoesNotExistException".
	//
	// The specified repository does not exist.
	ErrCodeRepositoryDoesNotExistException = "RepositoryDoesNotExistException"

	// ErrCodeRepositoryLimitExceededException for service response error code
	// "RepositoryLimitExceededException".
	//
	// A repository resource limit was exceeded.
	ErrCodeRepositoryLimitExceededException = "RepositoryLimitExceededException"

	// ErrCodeRepositoryNameExistsException for service response error code
	// "RepositoryNameExistsException".
	//
	// The specified repository name already exists.
	ErrCodeRepositoryNameExistsException = "RepositoryNameExistsException"

	// ErrCodeRepositoryNameRequiredException for service response error code
	// "RepositoryNameRequiredException".
	//
	// A repository name is required but was not specified.
	ErrCodeRepositoryNameRequiredException = "RepositoryNameRequiredException"

	// ErrCodeRepositoryNamesRequiredException for service response error code
	// "RepositoryNamesRequiredException".
	//
	// A repository names object is required but was not specified.
	ErrCodeRepositoryNamesRequiredException = "RepositoryNamesRequiredException"

	// ErrCodeRepositoryTriggerBranchNameListRequiredException for service response error code
	// "RepositoryTriggerBranchNameListRequiredException".
	//
	// At least one branch name is required but was not specified in the trigger
	// configuration.
	ErrCodeRepositoryTriggerBranchNameListRequiredException = "RepositoryTriggerBranchNameListRequiredException"

	// ErrCodeRepositoryTriggerDestinationArnRequiredException for service response error code
	// "RepositoryTriggerDestinationArnRequiredException".
	//
	// A destination ARN for the target service for the trigger is required but
	// was not specified.
	ErrCodeRepositoryTriggerDestinationArnRequiredException = "RepositoryTriggerDestinationArnRequiredException"

	// ErrCodeRepositoryTriggerEventsListRequiredException for service response error code
	// "RepositoryTriggerEventsListRequiredException".
	//
	// At least one event for the trigger is required but was not specified.
	ErrCodeRepositoryTriggerEventsListRequiredException = "RepositoryTriggerEventsListRequiredException"

	// ErrCodeRepositoryTriggerNameRequiredException for service response error code
	// "RepositoryTriggerNameRequiredException".
	//
	// A name for the trigger is required but was not specified.
	ErrCodeRepositoryTriggerNameRequiredException = "RepositoryTriggerNameRequiredException"

	// ErrCodeRepositoryTriggersListRequiredException for service response error code
	// "RepositoryTriggersListRequiredException".
	//
	// The list of triggers for the repository is required but was not specified.
	ErrCodeRepositoryTriggersListRequiredException = "RepositoryTriggersListRequiredException"
)
View Source 
const (
	ServiceName = "codecommit" // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName  // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

This section is empty.

Types

type BatchGetRepositoriesInput 

type BatchGetRepositoriesInput struct {

	// The names of the repositories to get information about.
	//
	// RepositoryNames is a required field
	RepositoryNames []*string `locationName:"repositoryNames" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a batch get repositories operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BatchGetRepositoriesInput

func (BatchGetRepositoriesInput) GoString 

func (s BatchGetRepositoriesInput) GoString() string

GoString returns the string representation

func (*BatchGetRepositoriesInput) SetRepositoryNames added in v1.5.1 

func (s *BatchGetRepositoriesInput) SetRepositoryNames(v []*string) *BatchGetRepositoriesInput

SetRepositoryNames sets the RepositoryNames field's value.

func (BatchGetRepositoriesInput) String 

func (s BatchGetRepositoriesInput) String() string

String returns the string representation

func (*BatchGetRepositoriesInput) Validate added in v1.1.24 

func (s *BatchGetRepositoriesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BatchGetRepositoriesOutput 

type BatchGetRepositoriesOutput struct {

	// A list of repositories returned by the batch get repositories operation.
	Repositories []*RepositoryMetadata `locationName:"repositories" type:"list"`

	// Returns a list of repository names for which information could not be found.
	RepositoriesNotFound []*string `locationName:"repositoriesNotFound" type:"list"`
	// contains filtered or unexported fields
}

Represents the output of a batch get repositories operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BatchGetRepositoriesOutput

func (BatchGetRepositoriesOutput) GoString 

func (s BatchGetRepositoriesOutput) GoString() string

GoString returns the string representation

func (*BatchGetRepositoriesOutput) SetRepositories added in v1.5.1 

func (s *BatchGetRepositoriesOutput) SetRepositories(v []*RepositoryMetadata) *BatchGetRepositoriesOutput

SetRepositories sets the Repositories field's value.

func (*BatchGetRepositoriesOutput) SetRepositoriesNotFound added in v1.5.1 

func (s *BatchGetRepositoriesOutput) SetRepositoriesNotFound(v []*string) *BatchGetRepositoriesOutput

SetRepositoriesNotFound sets the RepositoriesNotFound field's value.

func (BatchGetRepositoriesOutput) String 

func (s BatchGetRepositoriesOutput) String() string

String returns the string representation

type BlobMetadata added in v1.6.16 

type BlobMetadata struct {

	// The full ID of the blob.
	BlobId *string `locationName:"blobId" type:"string"`

	// The file mode permissions of the blob. File mode permission codes include:
	//
	//    * 100644 indicates read/write
	//
	//    * 100755 indicates read/write/execute
	//
	//    * 160000 indicates a submodule
	//
	//    * 120000 indicates a symlink
	Mode *string `locationName:"mode" type:"string"`

	// The path to the blob and any associated file name, if any.
	Path *string `locationName:"path" type:"string"`
	// contains filtered or unexported fields
}

Returns information about a specific Git blob object. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BlobMetadata

func (BlobMetadata) GoString added in v1.6.16 

func (s BlobMetadata) GoString() string

GoString returns the string representation

func (*BlobMetadata) SetBlobId added in v1.6.16 

func (s *BlobMetadata) SetBlobId(v string) *BlobMetadata

SetBlobId sets the BlobId field's value.

func (*BlobMetadata) SetMode added in v1.6.16 

func (s *BlobMetadata) SetMode(v string) *BlobMetadata

SetMode sets the Mode field's value.

func (*BlobMetadata) SetPath added in v1.6.16 

func (s *BlobMetadata) SetPath(v string) *BlobMetadata

SetPath sets the Path field's value.

func (BlobMetadata) String added in v1.6.16 

func (s BlobMetadata) String() string

String returns the string representation

type BranchInfo 

type BranchInfo struct {

	// The name of the branch.
	BranchName *string `locationName:"branchName" min:"1" type:"string"`

	// The ID of the last commit made to the branch.
	CommitId *string `locationName:"commitId" type:"string"`
	// contains filtered or unexported fields
}

Returns information about a branch. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BranchInfo

func (BranchInfo) GoString 

func (s BranchInfo) GoString() string

GoString returns the string representation

func (*BranchInfo) SetBranchName added in v1.5.1 

func (s *BranchInfo) SetBranchName(v string) *BranchInfo

SetBranchName sets the BranchName field's value.

func (*BranchInfo) SetCommitId added in v1.5.1 

func (s *BranchInfo) SetCommitId(v string) *BranchInfo

SetCommitId sets the CommitId field's value.

func (BranchInfo) String 

func (s BranchInfo) String() string

String returns the string representation

type CodeCommit 

type CodeCommit struct {
	*client.Client
}

This is the AWS CodeCommit API Reference. This reference provides descriptions of the operations and data types for AWS CodeCommit API along with usage examples.

You can use the AWS CodeCommit API to work with the following objects:

Repositories, by calling the following:

  • BatchGetRepositories, which returns information about one or more repositories associated with your AWS account

  • CreateRepository, which creates an AWS CodeCommit repository

  • DeleteRepository, which deletes an AWS CodeCommit repository

  • GetRepository, which returns information about a specified repository

  • ListRepositories, which lists all AWS CodeCommit repositories associated with your AWS account

  • UpdateRepositoryDescription, which sets or updates the description of the repository

  • UpdateRepositoryName, which changes the name of the repository. If you change the name of a repository, no other users of that repository will be able to access it until you send them the new HTTPS or SSH URL to use.

Branches, by calling the following:

  • CreateBranch, which creates a new branch in a specified repository

  • GetBranch, which returns information about a specified branch

  • ListBranches, which lists all branches for a specified repository

  • UpdateDefaultBranch, which changes the default branch for a repository

Information about committed code in a repository, by calling the following:

  • GetBlob, which returns the base-64 encoded content of an individual Git blob object within a repository

  • GetCommit, which returns information about a commit, including commit messages and author and committer information

  • GetDifferences, which returns information about the differences in a valid commit specifier (such as a branch, tag, HEAD, commit ID or other fully qualified reference)

Triggers, by calling the following:

  • GetRepositoryTriggers, which returns information about triggers configured for a repository

  • PutRepositoryTriggers, which replaces all triggers for a repository and can be used to create or delete triggers

  • TestRepositoryTriggers, which tests the functionality of a repository trigger by sending data to the trigger target

For information about how to use AWS CodeCommit, see the AWS CodeCommit User Guide (http://docs.aws.amazon.com/codecommit/latest/userguide/welcome.html). The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13

func New 

func New(p client.ConfigProvider, cfgs ...*aws.Config) *CodeCommit

New creates a new instance of the CodeCommit client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example: 

// Create a CodeCommit client from just a session.
svc := codecommit.New(mySession)

// Create a CodeCommit client with additional configuration
svc := codecommit.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*CodeCommit) BatchGetRepositories 

func (c *CodeCommit) BatchGetRepositories(input *BatchGetRepositoriesInput) (*BatchGetRepositoriesOutput, error)

BatchGetRepositories API operation for AWS CodeCommit.

Returns information about one or more repositories.

The description field for a repository accepts all HTML characters and all valid Unicode characters. Applications that do not HTML-encode the description and display it in a web page could expose users to potentially malicious code. Make sure that you HTML-encode the description field in any application that uses this API to display the repository description on a web page.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation BatchGetRepositories for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNamesRequiredException "RepositoryNamesRequiredException" A repository names object is required but was not specified.

  • ErrCodeMaximumRepositoryNamesExceededException "MaximumRepositoryNamesExceededException" The maximum number of allowed repository names was exceeded. Currently, this number is 25.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BatchGetRepositories

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.BatchGetRepositoriesInput{
		RepositoryNames: []*string{ // Required
			aws.String("RepositoryName"), // Required
			// More values...
		},
	}
	resp, err := svc.BatchGetRepositories(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) BatchGetRepositoriesRequest 

func (c *CodeCommit) BatchGetRepositoriesRequest(input *BatchGetRepositoriesInput) (req *request.Request, output *BatchGetRepositoriesOutput)

BatchGetRepositoriesRequest generates a "aws/request.Request" representing the client's request for the BatchGetRepositories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchGetRepositories for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchGetRepositories method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the BatchGetRepositoriesRequest method.
req, resp := client.BatchGetRepositoriesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/BatchGetRepositories

func (*CodeCommit) BatchGetRepositoriesWithContext added in v1.8.0 

func (c *CodeCommit) BatchGetRepositoriesWithContext(ctx aws.Context, input *BatchGetRepositoriesInput, opts ...request.Option) (*BatchGetRepositoriesOutput, error)

BatchGetRepositoriesWithContext is the same as BatchGetRepositories with the addition of the ability to pass a context and additional request options.

See BatchGetRepositories for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) CreateBranch 

func (c *CodeCommit) CreateBranch(input *CreateBranchInput) (*CreateBranchOutput, error)

CreateBranch API operation for AWS CodeCommit.

Creates a new branch in a repository and points the branch to a commit.

Calling the create branch operation does not set a repository's default branch. To do this, call the update default branch operation.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation CreateBranch for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeBranchNameRequiredException "BranchNameRequiredException" A branch name is required but was not specified.

  • ErrCodeBranchNameExistsException "BranchNameExistsException" The specified branch name already exists.

  • ErrCodeInvalidBranchNameException "InvalidBranchNameException" The specified branch name is not valid.

  • ErrCodeCommitIdRequiredException "CommitIdRequiredException" A commit ID was not specified.

  • ErrCodeCommitDoesNotExistException "CommitDoesNotExistException" The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

  • ErrCodeInvalidCommitIdException "InvalidCommitIdException" The specified commit ID is not valid.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateBranch

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.CreateBranchInput{
		BranchName:     aws.String("BranchName"),     // Required
		CommitId:       aws.String("CommitId"),       // Required
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.CreateBranch(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) CreateBranchRequest 

func (c *CodeCommit) CreateBranchRequest(input *CreateBranchInput) (req *request.Request, output *CreateBranchOutput)

CreateBranchRequest generates a "aws/request.Request" representing the client's request for the CreateBranch operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateBranch for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateBranch method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateBranchRequest method.
req, resp := client.CreateBranchRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateBranch

func (*CodeCommit) CreateBranchWithContext added in v1.8.0 

func (c *CodeCommit) CreateBranchWithContext(ctx aws.Context, input *CreateBranchInput, opts ...request.Option) (*CreateBranchOutput, error)

CreateBranchWithContext is the same as CreateBranch with the addition of the ability to pass a context and additional request options.

See CreateBranch for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) CreateRepository 

func (c *CodeCommit) CreateRepository(input *CreateRepositoryInput) (*CreateRepositoryOutput, error)

CreateRepository API operation for AWS CodeCommit.

Creates a new, empty repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation CreateRepository for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameExistsException "RepositoryNameExistsException" The specified repository name already exists.

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeInvalidRepositoryDescriptionException "InvalidRepositoryDescriptionException" The specified repository description is not valid.

  • ErrCodeRepositoryLimitExceededException "RepositoryLimitExceededException" A repository resource limit was exceeded.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateRepository

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.CreateRepositoryInput{
		RepositoryName:        aws.String("RepositoryName"), // Required
		RepositoryDescription: aws.String("RepositoryDescription"),
	}
	resp, err := svc.CreateRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) CreateRepositoryRequest 

func (c *CodeCommit) CreateRepositoryRequest(input *CreateRepositoryInput) (req *request.Request, output *CreateRepositoryOutput)

CreateRepositoryRequest generates a "aws/request.Request" representing the client's request for the CreateRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateRepositoryRequest method.
req, resp := client.CreateRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateRepository

func (*CodeCommit) CreateRepositoryWithContext added in v1.8.0 

func (c *CodeCommit) CreateRepositoryWithContext(ctx aws.Context, input *CreateRepositoryInput, opts ...request.Option) (*CreateRepositoryOutput, error)

CreateRepositoryWithContext is the same as CreateRepository with the addition of the ability to pass a context and additional request options.

See CreateRepository for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) DeleteRepository 

func (c *CodeCommit) DeleteRepository(input *DeleteRepositoryInput) (*DeleteRepositoryOutput, error)

DeleteRepository API operation for AWS CodeCommit.

Deletes a repository. If a specified repository was already deleted, a null repository ID will be returned.

Deleting a repository also deletes all associated objects and metadata. After a repository is deleted, all future push calls to the deleted repository will fail.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation DeleteRepository for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/DeleteRepository

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.DeleteRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.DeleteRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) DeleteRepositoryRequest 

func (c *CodeCommit) DeleteRepositoryRequest(input *DeleteRepositoryInput) (req *request.Request, output *DeleteRepositoryOutput)

DeleteRepositoryRequest generates a "aws/request.Request" representing the client's request for the DeleteRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteRepositoryRequest method.
req, resp := client.DeleteRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/DeleteRepository

func (*CodeCommit) DeleteRepositoryWithContext added in v1.8.0 

func (c *CodeCommit) DeleteRepositoryWithContext(ctx aws.Context, input *DeleteRepositoryInput, opts ...request.Option) (*DeleteRepositoryOutput, error)

DeleteRepositoryWithContext is the same as DeleteRepository with the addition of the ability to pass a context and additional request options.

See DeleteRepository for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetBlob added in v1.6.16 

func (c *CodeCommit) GetBlob(input *GetBlobInput) (*GetBlobOutput, error)

GetBlob API operation for AWS CodeCommit.

Returns the base-64 encoded content of an individual blob within a repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetBlob for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeBlobIdRequiredException "BlobIdRequiredException" A blob ID is required but was not specified.

  • ErrCodeInvalidBlobIdException "InvalidBlobIdException" The specified blob is not valid.

  • ErrCodeBlobIdDoesNotExistException "BlobIdDoesNotExistException" The specified blob does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

  • ErrCodeFileTooLargeException "FileTooLargeException" The specified file exceeds the file size limit for AWS CodeCommit. For more information about limits in AWS CodeCommit, see AWS CodeCommit User Guide (http://docs.aws.amazon.com/codecommit/latest/userguide/limits.html).

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBlob

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetBlobInput{
		BlobId:         aws.String("ObjectId"),       // Required
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.GetBlob(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetBlobRequest added in v1.6.16 

func (c *CodeCommit) GetBlobRequest(input *GetBlobInput) (req *request.Request, output *GetBlobOutput)

GetBlobRequest generates a "aws/request.Request" representing the client's request for the GetBlob operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetBlob for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetBlob method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetBlobRequest method.
req, resp := client.GetBlobRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBlob

func (*CodeCommit) GetBlobWithContext added in v1.8.0 

func (c *CodeCommit) GetBlobWithContext(ctx aws.Context, input *GetBlobInput, opts ...request.Option) (*GetBlobOutput, error)

GetBlobWithContext is the same as GetBlob with the addition of the ability to pass a context and additional request options.

See GetBlob for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetBranch 

func (c *CodeCommit) GetBranch(input *GetBranchInput) (*GetBranchOutput, error)

GetBranch API operation for AWS CodeCommit.

Returns information about a repository branch, including its name and the last commit ID.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetBranch for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeBranchNameRequiredException "BranchNameRequiredException" A branch name is required but was not specified.

  • ErrCodeInvalidBranchNameException "InvalidBranchNameException" The specified branch name is not valid.

  • ErrCodeBranchDoesNotExistException "BranchDoesNotExistException" The specified branch does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBranch

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetBranchInput{
		BranchName:     aws.String("BranchName"),
		RepositoryName: aws.String("RepositoryName"),
	}
	resp, err := svc.GetBranch(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetBranchRequest 

func (c *CodeCommit) GetBranchRequest(input *GetBranchInput) (req *request.Request, output *GetBranchOutput)

GetBranchRequest generates a "aws/request.Request" representing the client's request for the GetBranch operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetBranch for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetBranch method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetBranchRequest method.
req, resp := client.GetBranchRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBranch

func (*CodeCommit) GetBranchWithContext added in v1.8.0 

func (c *CodeCommit) GetBranchWithContext(ctx aws.Context, input *GetBranchInput, opts ...request.Option) (*GetBranchOutput, error)

GetBranchWithContext is the same as GetBranch with the addition of the ability to pass a context and additional request options.

See GetBranch for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetCommit added in v1.1.16 

func (c *CodeCommit) GetCommit(input *GetCommitInput) (*GetCommitOutput, error)

GetCommit API operation for AWS CodeCommit.

Returns information about a commit, including commit message and committer information.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetCommit for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeCommitIdRequiredException "CommitIdRequiredException" A commit ID was not specified.

  • ErrCodeInvalidCommitIdException "InvalidCommitIdException" The specified commit ID is not valid.

  • ErrCodeCommitIdDoesNotExistException "CommitIdDoesNotExistException" The specified commit ID does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetCommit

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetCommitInput{
		CommitId:       aws.String("ObjectId"),       // Required
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.GetCommit(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetCommitRequest added in v1.1.16 

func (c *CodeCommit) GetCommitRequest(input *GetCommitInput) (req *request.Request, output *GetCommitOutput)

GetCommitRequest generates a "aws/request.Request" representing the client's request for the GetCommit operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetCommit for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetCommit method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetCommitRequest method.
req, resp := client.GetCommitRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetCommit

func (*CodeCommit) GetCommitWithContext added in v1.8.0 

func (c *CodeCommit) GetCommitWithContext(ctx aws.Context, input *GetCommitInput, opts ...request.Option) (*GetCommitOutput, error)

GetCommitWithContext is the same as GetCommit with the addition of the ability to pass a context and additional request options.

See GetCommit for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetDifferences added in v1.6.16 

func (c *CodeCommit) GetDifferences(input *GetDifferencesInput) (*GetDifferencesOutput, error)

GetDifferences API operation for AWS CodeCommit.

Returns information about the differences in a valid commit specifier (such as a branch, tag, HEAD, commit ID or other fully qualified reference). Results can be limited to a specified path.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetDifferences for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeInvalidContinuationTokenException "InvalidContinuationTokenException" The specified continuation token is not valid.

  • ErrCodeInvalidMaxResultsException "InvalidMaxResultsException" The specified number of maximum results is not valid.

  • ErrCodeInvalidCommitIdException "InvalidCommitIdException" The specified commit ID is not valid.

  • ErrCodeCommitRequiredException "CommitRequiredException" A commit was not specified.

  • ErrCodeInvalidCommitException "InvalidCommitException" The specified commit is not valid.

  • ErrCodeCommitDoesNotExistException "CommitDoesNotExistException" The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

  • ErrCodeInvalidPathException "InvalidPathException" The specified path is not valid.

  • ErrCodePathDoesNotExistException "PathDoesNotExistException" The specified path does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetDifferences

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetDifferencesInput{
		AfterCommitSpecifier:  aws.String("CommitName"),     // Required
		RepositoryName:        aws.String("RepositoryName"), // Required
		AfterPath:             aws.String("Path"),
		BeforeCommitSpecifier: aws.String("CommitName"),
		BeforePath:            aws.String("Path"),
		MaxResults:            aws.Int64(1),
		NextToken:             aws.String("NextToken"),
	}
	resp, err := svc.GetDifferences(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetDifferencesPages added in v1.6.16 

func (c *CodeCommit) GetDifferencesPages(input *GetDifferencesInput, fn func(*GetDifferencesOutput, bool) bool) error

GetDifferencesPages iterates over the pages of a GetDifferences operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See GetDifferences method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a GetDifferences operation.
pageNum := 0
err := client.GetDifferencesPages(params,
    func(page *GetDifferencesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*CodeCommit) GetDifferencesPagesWithContext added in v1.8.0 

func (c *CodeCommit) GetDifferencesPagesWithContext(ctx aws.Context, input *GetDifferencesInput, fn func(*GetDifferencesOutput, bool) bool, opts ...request.Option) error

GetDifferencesPagesWithContext same as GetDifferencesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetDifferencesRequest added in v1.6.16 

func (c *CodeCommit) GetDifferencesRequest(input *GetDifferencesInput) (req *request.Request, output *GetDifferencesOutput)

GetDifferencesRequest generates a "aws/request.Request" representing the client's request for the GetDifferences operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetDifferences for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDifferences method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetDifferencesRequest method.
req, resp := client.GetDifferencesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetDifferences

func (*CodeCommit) GetDifferencesWithContext added in v1.8.0 

func (c *CodeCommit) GetDifferencesWithContext(ctx aws.Context, input *GetDifferencesInput, opts ...request.Option) (*GetDifferencesOutput, error)

GetDifferencesWithContext is the same as GetDifferences with the addition of the ability to pass a context and additional request options.

See GetDifferences for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetRepository 

func (c *CodeCommit) GetRepository(input *GetRepositoryInput) (*GetRepositoryOutput, error)

GetRepository API operation for AWS CodeCommit.

Returns information about a repository.

The description field for a repository accepts all HTML characters and all valid Unicode characters. Applications that do not HTML-encode the description and display it in a web page could expose users to potentially malicious code. Make sure that you HTML-encode the description field in any application that uses this API to display the repository description on a web page.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetRepository for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepository

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.GetRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetRepositoryRequest 

func (c *CodeCommit) GetRepositoryRequest(input *GetRepositoryInput) (req *request.Request, output *GetRepositoryOutput)

GetRepositoryRequest generates a "aws/request.Request" representing the client's request for the GetRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetRepositoryRequest method.
req, resp := client.GetRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepository

func (*CodeCommit) GetRepositoryTriggers added in v1.1.16 

func (c *CodeCommit) GetRepositoryTriggers(input *GetRepositoryTriggersInput) (*GetRepositoryTriggersOutput, error)

GetRepositoryTriggers API operation for AWS CodeCommit.

Gets information about triggers configured for a repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation GetRepositoryTriggers for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryTriggers

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.GetRepositoryTriggersInput{
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.GetRepositoryTriggers(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) GetRepositoryTriggersRequest added in v1.1.16 

func (c *CodeCommit) GetRepositoryTriggersRequest(input *GetRepositoryTriggersInput) (req *request.Request, output *GetRepositoryTriggersOutput)

GetRepositoryTriggersRequest generates a "aws/request.Request" representing the client's request for the GetRepositoryTriggers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetRepositoryTriggers for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetRepositoryTriggers method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetRepositoryTriggersRequest method.
req, resp := client.GetRepositoryTriggersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryTriggers

func (*CodeCommit) GetRepositoryTriggersWithContext added in v1.8.0 

func (c *CodeCommit) GetRepositoryTriggersWithContext(ctx aws.Context, input *GetRepositoryTriggersInput, opts ...request.Option) (*GetRepositoryTriggersOutput, error)

GetRepositoryTriggersWithContext is the same as GetRepositoryTriggers with the addition of the ability to pass a context and additional request options.

See GetRepositoryTriggers for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) GetRepositoryWithContext added in v1.8.0 

func (c *CodeCommit) GetRepositoryWithContext(ctx aws.Context, input *GetRepositoryInput, opts ...request.Option) (*GetRepositoryOutput, error)

GetRepositoryWithContext is the same as GetRepository with the addition of the ability to pass a context and additional request options.

See GetRepository for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) ListBranches 

func (c *CodeCommit) ListBranches(input *ListBranchesInput) (*ListBranchesOutput, error)

ListBranches API operation for AWS CodeCommit.

Gets information about one or more branches in a repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation ListBranches for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

  • ErrCodeInvalidContinuationTokenException "InvalidContinuationTokenException" The specified continuation token is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListBranches

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.ListBranchesInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		NextToken:      aws.String("NextToken"),
	}
	resp, err := svc.ListBranches(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) ListBranchesPages added in v1.1.16 

func (c *CodeCommit) ListBranchesPages(input *ListBranchesInput, fn func(*ListBranchesOutput, bool) bool) error

ListBranchesPages iterates over the pages of a ListBranches operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListBranches method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a ListBranches operation.
pageNum := 0
err := client.ListBranchesPages(params,
    func(page *ListBranchesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*CodeCommit) ListBranchesPagesWithContext added in v1.8.0 

func (c *CodeCommit) ListBranchesPagesWithContext(ctx aws.Context, input *ListBranchesInput, fn func(*ListBranchesOutput, bool) bool, opts ...request.Option) error

ListBranchesPagesWithContext same as ListBranchesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) ListBranchesRequest 

func (c *CodeCommit) ListBranchesRequest(input *ListBranchesInput) (req *request.Request, output *ListBranchesOutput)

ListBranchesRequest generates a "aws/request.Request" representing the client's request for the ListBranches operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListBranches for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListBranches method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListBranchesRequest method.
req, resp := client.ListBranchesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListBranches

func (*CodeCommit) ListBranchesWithContext added in v1.8.0 

func (c *CodeCommit) ListBranchesWithContext(ctx aws.Context, input *ListBranchesInput, opts ...request.Option) (*ListBranchesOutput, error)

ListBranchesWithContext is the same as ListBranches with the addition of the ability to pass a context and additional request options.

See ListBranches for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) ListRepositories 

func (c *CodeCommit) ListRepositories(input *ListRepositoriesInput) (*ListRepositoriesOutput, error)

ListRepositories API operation for AWS CodeCommit.

Gets information about one or more repositories.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation ListRepositories for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidSortByException "InvalidSortByException" The specified sort by value is not valid.

  • ErrCodeInvalidOrderException "InvalidOrderException" The specified sort order is not valid.

  • ErrCodeInvalidContinuationTokenException "InvalidContinuationTokenException" The specified continuation token is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListRepositories

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.ListRepositoriesInput{
		NextToken: aws.String("NextToken"),
		Order:     aws.String("OrderEnum"),
		SortBy:    aws.String("SortByEnum"),
	}
	resp, err := svc.ListRepositories(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) ListRepositoriesPages added in v1.1.16 

func (c *CodeCommit) ListRepositoriesPages(input *ListRepositoriesInput, fn func(*ListRepositoriesOutput, bool) bool) error

ListRepositoriesPages iterates over the pages of a ListRepositories operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListRepositories method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a ListRepositories operation.
pageNum := 0
err := client.ListRepositoriesPages(params,
    func(page *ListRepositoriesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*CodeCommit) ListRepositoriesPagesWithContext added in v1.8.0 

func (c *CodeCommit) ListRepositoriesPagesWithContext(ctx aws.Context, input *ListRepositoriesInput, fn func(*ListRepositoriesOutput, bool) bool, opts ...request.Option) error

ListRepositoriesPagesWithContext same as ListRepositoriesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) ListRepositoriesRequest 

func (c *CodeCommit) ListRepositoriesRequest(input *ListRepositoriesInput) (req *request.Request, output *ListRepositoriesOutput)

ListRepositoriesRequest generates a "aws/request.Request" representing the client's request for the ListRepositories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListRepositories for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListRepositories method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListRepositoriesRequest method.
req, resp := client.ListRepositoriesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListRepositories

func (*CodeCommit) ListRepositoriesWithContext added in v1.8.0 

func (c *CodeCommit) ListRepositoriesWithContext(ctx aws.Context, input *ListRepositoriesInput, opts ...request.Option) (*ListRepositoriesOutput, error)

ListRepositoriesWithContext is the same as ListRepositories with the addition of the ability to pass a context and additional request options.

See ListRepositories for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) PutRepositoryTriggers added in v1.1.16 

func (c *CodeCommit) PutRepositoryTriggers(input *PutRepositoryTriggersInput) (*PutRepositoryTriggersOutput, error)

PutRepositoryTriggers API operation for AWS CodeCommit.

Replaces all triggers for a repository. This can be used to create or delete triggers.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation PutRepositoryTriggers for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryTriggersListRequiredException "RepositoryTriggersListRequiredException" The list of triggers for the repository is required but was not specified.

  • ErrCodeMaximumRepositoryTriggersExceededException "MaximumRepositoryTriggersExceededException" The number of triggers allowed for the repository was exceeded.

  • ErrCodeInvalidRepositoryTriggerNameException "InvalidRepositoryTriggerNameException" The name of the trigger is not valid.

  • ErrCodeInvalidRepositoryTriggerDestinationArnException "InvalidRepositoryTriggerDestinationArnException" The Amazon Resource Name (ARN) for the trigger is not valid for the specified destination. The most common reason for this error is that the ARN does not meet the requirements for the service type.

  • ErrCodeInvalidRepositoryTriggerRegionException "InvalidRepositoryTriggerRegionException" The region for the trigger target does not match the region for the repository. Triggers must be created in the same region as the target for the trigger.

  • ErrCodeInvalidRepositoryTriggerCustomDataException "InvalidRepositoryTriggerCustomDataException" The custom data provided for the trigger is not valid.

  • ErrCodeMaximumBranchesExceededException "MaximumBranchesExceededException" The number of branches for the trigger was exceeded.

  • ErrCodeInvalidRepositoryTriggerBranchNameException "InvalidRepositoryTriggerBranchNameException" One or more branch names specified for the trigger is not valid.

  • ErrCodeInvalidRepositoryTriggerEventsException "InvalidRepositoryTriggerEventsException" One or more events specified for the trigger is not valid. Check to make sure that all events specified match the requirements for allowed events.

  • ErrCodeRepositoryTriggerNameRequiredException "RepositoryTriggerNameRequiredException" A name for the trigger is required but was not specified.

  • ErrCodeRepositoryTriggerDestinationArnRequiredException "RepositoryTriggerDestinationArnRequiredException" A destination ARN for the target service for the trigger is required but was not specified.

  • ErrCodeRepositoryTriggerBranchNameListRequiredException "RepositoryTriggerBranchNameListRequiredException" At least one branch name is required but was not specified in the trigger configuration.

  • ErrCodeRepositoryTriggerEventsListRequiredException "RepositoryTriggerEventsListRequiredException" At least one event for the trigger is required but was not specified.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/PutRepositoryTriggers

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.PutRepositoryTriggersInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Triggers: []*codecommit.RepositoryTrigger{ // Required
			{ // Required
				DestinationArn: aws.String("Arn"), // Required
				Events: []*string{ // Required
					aws.String("RepositoryTriggerEventEnum"), // Required
					// More values...
				},
				Name: aws.String("RepositoryTriggerName"), // Required
				Branches: []*string{
					aws.String("BranchName"), // Required
					// More values...
				},
				CustomData: aws.String("RepositoryTriggerCustomData"),
			},
			// More values...
		},
	}
	resp, err := svc.PutRepositoryTriggers(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) PutRepositoryTriggersRequest added in v1.1.16 

func (c *CodeCommit) PutRepositoryTriggersRequest(input *PutRepositoryTriggersInput) (req *request.Request, output *PutRepositoryTriggersOutput)

PutRepositoryTriggersRequest generates a "aws/request.Request" representing the client's request for the PutRepositoryTriggers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See PutRepositoryTriggers for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutRepositoryTriggers method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the PutRepositoryTriggersRequest method.
req, resp := client.PutRepositoryTriggersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/PutRepositoryTriggers

func (*CodeCommit) PutRepositoryTriggersWithContext added in v1.8.0 

func (c *CodeCommit) PutRepositoryTriggersWithContext(ctx aws.Context, input *PutRepositoryTriggersInput, opts ...request.Option) (*PutRepositoryTriggersOutput, error)

PutRepositoryTriggersWithContext is the same as PutRepositoryTriggers with the addition of the ability to pass a context and additional request options.

See PutRepositoryTriggers for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) TestRepositoryTriggers added in v1.1.16 

func (c *CodeCommit) TestRepositoryTriggers(input *TestRepositoryTriggersInput) (*TestRepositoryTriggersOutput, error)

TestRepositoryTriggers API operation for AWS CodeCommit.

Tests the functionality of repository triggers by sending information to the trigger target. If real data is available in the repository, the test will send data from the last commit. If no data is available, sample data will be generated.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation TestRepositoryTriggers for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeRepositoryTriggersListRequiredException "RepositoryTriggersListRequiredException" The list of triggers for the repository is required but was not specified.

  • ErrCodeMaximumRepositoryTriggersExceededException "MaximumRepositoryTriggersExceededException" The number of triggers allowed for the repository was exceeded.

  • ErrCodeInvalidRepositoryTriggerNameException "InvalidRepositoryTriggerNameException" The name of the trigger is not valid.

  • ErrCodeInvalidRepositoryTriggerDestinationArnException "InvalidRepositoryTriggerDestinationArnException" The Amazon Resource Name (ARN) for the trigger is not valid for the specified destination. The most common reason for this error is that the ARN does not meet the requirements for the service type.

  • ErrCodeInvalidRepositoryTriggerRegionException "InvalidRepositoryTriggerRegionException" The region for the trigger target does not match the region for the repository. Triggers must be created in the same region as the target for the trigger.

  • ErrCodeInvalidRepositoryTriggerCustomDataException "InvalidRepositoryTriggerCustomDataException" The custom data provided for the trigger is not valid.

  • ErrCodeMaximumBranchesExceededException "MaximumBranchesExceededException" The number of branches for the trigger was exceeded.

  • ErrCodeInvalidRepositoryTriggerBranchNameException "InvalidRepositoryTriggerBranchNameException" One or more branch names specified for the trigger is not valid.

  • ErrCodeInvalidRepositoryTriggerEventsException "InvalidRepositoryTriggerEventsException" One or more events specified for the trigger is not valid. Check to make sure that all events specified match the requirements for allowed events.

  • ErrCodeRepositoryTriggerNameRequiredException "RepositoryTriggerNameRequiredException" A name for the trigger is required but was not specified.

  • ErrCodeRepositoryTriggerDestinationArnRequiredException "RepositoryTriggerDestinationArnRequiredException" A destination ARN for the target service for the trigger is required but was not specified.

  • ErrCodeRepositoryTriggerBranchNameListRequiredException "RepositoryTriggerBranchNameListRequiredException" At least one branch name is required but was not specified in the trigger configuration.

  • ErrCodeRepositoryTriggerEventsListRequiredException "RepositoryTriggerEventsListRequiredException" At least one event for the trigger is required but was not specified.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/TestRepositoryTriggers

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.TestRepositoryTriggersInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Triggers: []*codecommit.RepositoryTrigger{ // Required
			{ // Required
				DestinationArn: aws.String("Arn"), // Required
				Events: []*string{ // Required
					aws.String("RepositoryTriggerEventEnum"), // Required
					// More values...
				},
				Name: aws.String("RepositoryTriggerName"), // Required
				Branches: []*string{
					aws.String("BranchName"), // Required
					// More values...
				},
				CustomData: aws.String("RepositoryTriggerCustomData"),
			},
			// More values...
		},
	}
	resp, err := svc.TestRepositoryTriggers(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) TestRepositoryTriggersRequest added in v1.1.16 

func (c *CodeCommit) TestRepositoryTriggersRequest(input *TestRepositoryTriggersInput) (req *request.Request, output *TestRepositoryTriggersOutput)

TestRepositoryTriggersRequest generates a "aws/request.Request" representing the client's request for the TestRepositoryTriggers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See TestRepositoryTriggers for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TestRepositoryTriggers method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the TestRepositoryTriggersRequest method.
req, resp := client.TestRepositoryTriggersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/TestRepositoryTriggers

func (*CodeCommit) TestRepositoryTriggersWithContext added in v1.8.0 

func (c *CodeCommit) TestRepositoryTriggersWithContext(ctx aws.Context, input *TestRepositoryTriggersInput, opts ...request.Option) (*TestRepositoryTriggersOutput, error)

TestRepositoryTriggersWithContext is the same as TestRepositoryTriggers with the addition of the ability to pass a context and additional request options.

See TestRepositoryTriggers for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) UpdateDefaultBranch 

func (c *CodeCommit) UpdateDefaultBranch(input *UpdateDefaultBranchInput) (*UpdateDefaultBranchOutput, error)

UpdateDefaultBranch API operation for AWS CodeCommit.

Sets or changes the default branch name for the specified repository.

If you use this operation to change the default branch name to the current default branch name, a success message is returned even though the default branch did not change.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation UpdateDefaultBranch for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeBranchNameRequiredException "BranchNameRequiredException" A branch name is required but was not specified.

  • ErrCodeInvalidBranchNameException "InvalidBranchNameException" The specified branch name is not valid.

  • ErrCodeBranchDoesNotExistException "BranchDoesNotExistException" The specified branch does not exist.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateDefaultBranch

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.UpdateDefaultBranchInput{
		DefaultBranchName: aws.String("BranchName"),     // Required
		RepositoryName:    aws.String("RepositoryName"), // Required
	}
	resp, err := svc.UpdateDefaultBranch(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) UpdateDefaultBranchRequest 

func (c *CodeCommit) UpdateDefaultBranchRequest(input *UpdateDefaultBranchInput) (req *request.Request, output *UpdateDefaultBranchOutput)

UpdateDefaultBranchRequest generates a "aws/request.Request" representing the client's request for the UpdateDefaultBranch operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateDefaultBranch for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateDefaultBranch method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateDefaultBranchRequest method.
req, resp := client.UpdateDefaultBranchRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateDefaultBranch

func (*CodeCommit) UpdateDefaultBranchWithContext added in v1.8.0 

func (c *CodeCommit) UpdateDefaultBranchWithContext(ctx aws.Context, input *UpdateDefaultBranchInput, opts ...request.Option) (*UpdateDefaultBranchOutput, error)

UpdateDefaultBranchWithContext is the same as UpdateDefaultBranch with the addition of the ability to pass a context and additional request options.

See UpdateDefaultBranch for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) UpdateRepositoryDescription 

func (c *CodeCommit) UpdateRepositoryDescription(input *UpdateRepositoryDescriptionInput) (*UpdateRepositoryDescriptionOutput, error)

UpdateRepositoryDescription API operation for AWS CodeCommit.

Sets or changes the comment or description for a repository.

The description field for a repository accepts all HTML characters and all valid Unicode characters. Applications that do not HTML-encode the description and display it in a web page could expose users to potentially malicious code. Make sure that you HTML-encode the description field in any application that uses this API to display the repository description on a web page.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation UpdateRepositoryDescription for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

  • ErrCodeInvalidRepositoryDescriptionException "InvalidRepositoryDescriptionException" The specified repository description is not valid.

  • ErrCodeEncryptionIntegrityChecksFailedException "EncryptionIntegrityChecksFailedException" An encryption integrity check failed.

  • ErrCodeEncryptionKeyAccessDeniedException "EncryptionKeyAccessDeniedException" An encryption key could not be accessed.

  • ErrCodeEncryptionKeyDisabledException "EncryptionKeyDisabledException" The encryption key is disabled.

  • ErrCodeEncryptionKeyNotFoundException "EncryptionKeyNotFoundException" No encryption key was found.

  • ErrCodeEncryptionKeyUnavailableException "EncryptionKeyUnavailableException" The encryption key is not available.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryDescription

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.UpdateRepositoryDescriptionInput{
		RepositoryName:        aws.String("RepositoryName"), // Required
		RepositoryDescription: aws.String("RepositoryDescription"),
	}
	resp, err := svc.UpdateRepositoryDescription(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) UpdateRepositoryDescriptionRequest 

func (c *CodeCommit) UpdateRepositoryDescriptionRequest(input *UpdateRepositoryDescriptionInput) (req *request.Request, output *UpdateRepositoryDescriptionOutput)

UpdateRepositoryDescriptionRequest generates a "aws/request.Request" representing the client's request for the UpdateRepositoryDescription operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateRepositoryDescription for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateRepositoryDescription method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateRepositoryDescriptionRequest method.
req, resp := client.UpdateRepositoryDescriptionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryDescription

func (*CodeCommit) UpdateRepositoryDescriptionWithContext added in v1.8.0 

func (c *CodeCommit) UpdateRepositoryDescriptionWithContext(ctx aws.Context, input *UpdateRepositoryDescriptionInput, opts ...request.Option) (*UpdateRepositoryDescriptionOutput, error)

UpdateRepositoryDescriptionWithContext is the same as UpdateRepositoryDescription with the addition of the ability to pass a context and additional request options.

See UpdateRepositoryDescription for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*CodeCommit) UpdateRepositoryName 

func (c *CodeCommit) UpdateRepositoryName(input *UpdateRepositoryNameInput) (*UpdateRepositoryNameOutput, error)

UpdateRepositoryName API operation for AWS CodeCommit.

Renames a repository. The repository name must be unique across the calling AWS account. In addition, repository names are limited to 100 alphanumeric, dash, and underscore characters, and cannot include certain characters. The suffix ".git" is prohibited. For a full description of the limits on repository names, see Limits (http://docs.aws.amazon.com/codecommit/latest/userguide/limits.html) in the AWS CodeCommit User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS CodeCommit's API operation UpdateRepositoryName for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryDoesNotExistException "RepositoryDoesNotExistException" The specified repository does not exist.

  • ErrCodeRepositoryNameExistsException "RepositoryNameExistsException" The specified repository name already exists.

  • ErrCodeRepositoryNameRequiredException "RepositoryNameRequiredException" A repository name is required but was not specified.

  • ErrCodeInvalidRepositoryNameException "InvalidRepositoryNameException" At least one specified repository name is not valid.

    This exception only occurs when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryName

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/codecommit"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := codecommit.New(sess)

	params := &codecommit.UpdateRepositoryNameInput{
		NewName: aws.String("RepositoryName"), // Required
		OldName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.UpdateRepositoryName(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*CodeCommit) UpdateRepositoryNameRequest 

func (c *CodeCommit) UpdateRepositoryNameRequest(input *UpdateRepositoryNameInput) (req *request.Request, output *UpdateRepositoryNameOutput)

UpdateRepositoryNameRequest generates a "aws/request.Request" representing the client's request for the UpdateRepositoryName operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateRepositoryName for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateRepositoryName method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateRepositoryNameRequest method.
req, resp := client.UpdateRepositoryNameRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryName

func (*CodeCommit) UpdateRepositoryNameWithContext added in v1.8.0 

func (c *CodeCommit) UpdateRepositoryNameWithContext(ctx aws.Context, input *UpdateRepositoryNameInput, opts ...request.Option) (*UpdateRepositoryNameOutput, error)

UpdateRepositoryNameWithContext is the same as UpdateRepositoryName with the addition of the ability to pass a context and additional request options.

See UpdateRepositoryName for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type Commit added in v1.1.16 

type Commit struct {

	// Any additional data associated with the specified commit.
	AdditionalData *string `locationName:"additionalData" type:"string"`

	// Information about the author of the specified commit. Information includes
	// the date in timestamp format with GMT offset, the name of the author, and
	// the email address for the author, as configured in Git.
	Author *UserInfo `locationName:"author" type:"structure"`

	// Information about the person who committed the specified commit, also known
	// as the committer. Information includes the date in timestamp format with
	// GMT offset, the name of the committer, and the email address for the committer,
	// as configured in Git.
	//
	// For more information about the difference between an author and a committer
	// in Git, see Viewing the Commit History (http://git-scm.com/book/ch2-3.html)
	// in Pro Git by Scott Chacon and Ben Straub.
	Committer *UserInfo `locationName:"committer" type:"structure"`

	// The commit message associated with the specified commit.
	Message *string `locationName:"message" type:"string"`

	// The parent list for the specified commit.
	Parents []*string `locationName:"parents" type:"list"`

	// Tree information for the specified commit.
	TreeId *string `locationName:"treeId" type:"string"`
	// contains filtered or unexported fields
}

Returns information about a specific commit. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/Commit

func (Commit) GoString added in v1.1.16 

func (s Commit) GoString() string

GoString returns the string representation

func (*Commit) SetAdditionalData added in v1.5.1 

func (s *Commit) SetAdditionalData(v string) *Commit

SetAdditionalData sets the AdditionalData field's value.

func (*Commit) SetAuthor added in v1.5.1 

func (s *Commit) SetAuthor(v *UserInfo) *Commit

SetAuthor sets the Author field's value.

func (*Commit) SetCommitter added in v1.5.1 

func (s *Commit) SetCommitter(v *UserInfo) *Commit

SetCommitter sets the Committer field's value.

func (*Commit) SetMessage added in v1.5.1 

func (s *Commit) SetMessage(v string) *Commit

SetMessage sets the Message field's value.

func (*Commit) SetParents added in v1.5.1 

func (s *Commit) SetParents(v []*string) *Commit

SetParents sets the Parents field's value.

func (*Commit) SetTreeId added in v1.5.1 

func (s *Commit) SetTreeId(v string) *Commit

SetTreeId sets the TreeId field's value.

func (Commit) String added in v1.1.16 

func (s Commit) String() string

String returns the string representation

type CreateBranchInput 

type CreateBranchInput struct {

	// The name of the new branch to create.
	//
	// BranchName is a required field
	BranchName *string `locationName:"branchName" min:"1" type:"string" required:"true"`

	// The ID of the commit to point the new branch to.
	//
	// CommitId is a required field
	CommitId *string `locationName:"commitId" type:"string" required:"true"`

	// The name of the repository in which you want to create the new branch.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a create branch operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateBranchInput

func (CreateBranchInput) GoString 

func (s CreateBranchInput) GoString() string

GoString returns the string representation

func (*CreateBranchInput) SetBranchName added in v1.5.1 

func (s *CreateBranchInput) SetBranchName(v string) *CreateBranchInput

SetBranchName sets the BranchName field's value.

func (*CreateBranchInput) SetCommitId added in v1.5.1 

func (s *CreateBranchInput) SetCommitId(v string) *CreateBranchInput

SetCommitId sets the CommitId field's value.

func (*CreateBranchInput) SetRepositoryName added in v1.5.1 

func (s *CreateBranchInput) SetRepositoryName(v string) *CreateBranchInput

SetRepositoryName sets the RepositoryName field's value.

func (CreateBranchInput) String 

func (s CreateBranchInput) String() string

String returns the string representation

func (*CreateBranchInput) Validate added in v1.1.24 

func (s *CreateBranchInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateBranchOutput 

type CreateBranchOutput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateBranchOutput

func (CreateBranchOutput) GoString 

func (s CreateBranchOutput) GoString() string

GoString returns the string representation

func (CreateBranchOutput) String 

func (s CreateBranchOutput) String() string

String returns the string representation

type CreateRepositoryInput 

type CreateRepositoryInput struct {

	// A comment or description about the new repository.
	//
	// The description field for a repository accepts all HTML characters and all
	// valid Unicode characters. Applications that do not HTML-encode the description
	// and display it in a web page could expose users to potentially malicious
	// code. Make sure that you HTML-encode the description field in any application
	// that uses this API to display the repository description on a web page.
	RepositoryDescription *string `locationName:"repositoryDescription" type:"string"`

	// The name of the new repository to be created.
	//
	// The repository name must be unique across the calling AWS account. In addition,
	// repository names are limited to 100 alphanumeric, dash, and underscore characters,
	// and cannot include certain characters. For a full description of the limits
	// on repository names, see Limits (http://docs.aws.amazon.com/codecommit/latest/userguide/limits.html)
	// in the AWS CodeCommit User Guide. The suffix ".git" is prohibited.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a create repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateRepositoryInput

func (CreateRepositoryInput) GoString 

func (s CreateRepositoryInput) GoString() string

GoString returns the string representation

func (*CreateRepositoryInput) SetRepositoryDescription added in v1.5.1 

func (s *CreateRepositoryInput) SetRepositoryDescription(v string) *CreateRepositoryInput

SetRepositoryDescription sets the RepositoryDescription field's value.

func (*CreateRepositoryInput) SetRepositoryName added in v1.5.1 

func (s *CreateRepositoryInput) SetRepositoryName(v string) *CreateRepositoryInput

SetRepositoryName sets the RepositoryName field's value.

func (CreateRepositoryInput) String 

func (s CreateRepositoryInput) String() string

String returns the string representation

func (*CreateRepositoryInput) Validate added in v1.1.24 

func (s *CreateRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateRepositoryOutput 

type CreateRepositoryOutput struct {

	// Information about the newly created repository.
	RepositoryMetadata *RepositoryMetadata `locationName:"repositoryMetadata" type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a create repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/CreateRepositoryOutput

func (CreateRepositoryOutput) GoString 

func (s CreateRepositoryOutput) GoString() string

GoString returns the string representation

func (*CreateRepositoryOutput) SetRepositoryMetadata added in v1.5.1 

func (s *CreateRepositoryOutput) SetRepositoryMetadata(v *RepositoryMetadata) *CreateRepositoryOutput

SetRepositoryMetadata sets the RepositoryMetadata field's value.

func (CreateRepositoryOutput) String 

func (s CreateRepositoryOutput) String() string

String returns the string representation

type DeleteRepositoryInput 

type DeleteRepositoryInput struct {

	// The name of the repository to delete.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a delete repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/DeleteRepositoryInput

func (DeleteRepositoryInput) GoString 

func (s DeleteRepositoryInput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryInput) SetRepositoryName added in v1.5.1 

func (s *DeleteRepositoryInput) SetRepositoryName(v string) *DeleteRepositoryInput

SetRepositoryName sets the RepositoryName field's value.

func (DeleteRepositoryInput) String 

func (s DeleteRepositoryInput) String() string

String returns the string representation

func (*DeleteRepositoryInput) Validate added in v1.1.24 

func (s *DeleteRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRepositoryOutput 

type DeleteRepositoryOutput struct {

	// The ID of the repository that was deleted.
	RepositoryId *string `locationName:"repositoryId" type:"string"`
	// contains filtered or unexported fields
}

Represents the output of a delete repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/DeleteRepositoryOutput

func (DeleteRepositoryOutput) GoString 

func (s DeleteRepositoryOutput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryOutput) SetRepositoryId added in v1.5.1 

func (s *DeleteRepositoryOutput) SetRepositoryId(v string) *DeleteRepositoryOutput

SetRepositoryId sets the RepositoryId field's value.

func (DeleteRepositoryOutput) String 

func (s DeleteRepositoryOutput) String() string

String returns the string representation

type Difference added in v1.6.16 

type Difference struct {

	// Information about an afterBlob data type object, including the ID, the file
	// mode permission code, and the path.
	AfterBlob *BlobMetadata `locationName:"afterBlob" type:"structure"`

	// Information about a beforeBlob data type object, including the ID, the file
	// mode permission code, and the path.
	BeforeBlob *BlobMetadata `locationName:"beforeBlob" type:"structure"`

	// Whether the change type of the difference is an addition (A), deletion (D),
	// or modification (M).
	ChangeType *string `locationName:"changeType" type:"string" enum:"ChangeTypeEnum"`
	// contains filtered or unexported fields
}

Returns information about a set of differences for a commit specifier. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/Difference

func (Difference) GoString added in v1.6.16 

func (s Difference) GoString() string

GoString returns the string representation

func (*Difference) SetAfterBlob added in v1.6.16 

func (s *Difference) SetAfterBlob(v *BlobMetadata) *Difference

SetAfterBlob sets the AfterBlob field's value.

func (*Difference) SetBeforeBlob added in v1.6.16 

func (s *Difference) SetBeforeBlob(v *BlobMetadata) *Difference

SetBeforeBlob sets the BeforeBlob field's value.

func (*Difference) SetChangeType added in v1.6.16 

func (s *Difference) SetChangeType(v string) *Difference

SetChangeType sets the ChangeType field's value.

func (Difference) String added in v1.6.16 

func (s Difference) String() string

String returns the string representation

type GetBlobInput added in v1.6.16 

type GetBlobInput struct {

	// The ID of the blob, which is its SHA-1 pointer.
	//
	// BlobId is a required field
	BlobId *string `locationName:"blobId" type:"string" required:"true"`

	// The name of the repository that contains the blob.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a get blob operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBlobInput

func (GetBlobInput) GoString added in v1.6.16 

func (s GetBlobInput) GoString() string

GoString returns the string representation

func (*GetBlobInput) SetBlobId added in v1.6.16 

func (s *GetBlobInput) SetBlobId(v string) *GetBlobInput

SetBlobId sets the BlobId field's value.

func (*GetBlobInput) SetRepositoryName added in v1.6.16 

func (s *GetBlobInput) SetRepositoryName(v string) *GetBlobInput

SetRepositoryName sets the RepositoryName field's value.

func (GetBlobInput) String added in v1.6.16 

func (s GetBlobInput) String() string

String returns the string representation

func (*GetBlobInput) Validate added in v1.6.16 

func (s *GetBlobInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetBlobOutput added in v1.6.16 

type GetBlobOutput struct {

	// The content of the blob, usually a file.
	//
	// Content is automatically base64 encoded/decoded by the SDK.
	//
	// Content is a required field
	Content []byte `locationName:"content" type:"blob" required:"true"`
	// contains filtered or unexported fields
}

Represents the output of a get blob operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBlobOutput

func (GetBlobOutput) GoString added in v1.6.16 

func (s GetBlobOutput) GoString() string

GoString returns the string representation

func (*GetBlobOutput) SetContent added in v1.6.16 

func (s *GetBlobOutput) SetContent(v []byte) *GetBlobOutput

SetContent sets the Content field's value.

func (GetBlobOutput) String added in v1.6.16 

func (s GetBlobOutput) String() string

String returns the string representation

type GetBranchInput 

type GetBranchInput struct {

	// The name of the branch for which you want to retrieve information.
	BranchName *string `locationName:"branchName" min:"1" type:"string"`

	// The name of the repository that contains the branch for which you want to
	// retrieve information.
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string"`
	// contains filtered or unexported fields
}

Represents the input of a get branch operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBranchInput

func (GetBranchInput) GoString 

func (s GetBranchInput) GoString() string

GoString returns the string representation

func (*GetBranchInput) SetBranchName added in v1.5.1 

func (s *GetBranchInput) SetBranchName(v string) *GetBranchInput

SetBranchName sets the BranchName field's value.

func (*GetBranchInput) SetRepositoryName added in v1.5.1 

func (s *GetBranchInput) SetRepositoryName(v string) *GetBranchInput

SetRepositoryName sets the RepositoryName field's value.

func (GetBranchInput) String 

func (s GetBranchInput) String() string

String returns the string representation

func (*GetBranchInput) Validate added in v1.1.24 

func (s *GetBranchInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetBranchOutput 

type GetBranchOutput struct {

	// The name of the branch.
	Branch *BranchInfo `locationName:"branch" type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a get branch operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetBranchOutput

func (GetBranchOutput) GoString 

func (s GetBranchOutput) GoString() string

GoString returns the string representation

func (*GetBranchOutput) SetBranch added in v1.5.1 

func (s *GetBranchOutput) SetBranch(v *BranchInfo) *GetBranchOutput

SetBranch sets the Branch field's value.

func (GetBranchOutput) String 

func (s GetBranchOutput) String() string

String returns the string representation

type GetCommitInput added in v1.1.16 

type GetCommitInput struct {

	// The commit ID.
	//
	// CommitId is a required field
	CommitId *string `locationName:"commitId" type:"string" required:"true"`

	// The name of the repository to which the commit was made.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a get commit operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetCommitInput

func (GetCommitInput) GoString added in v1.1.16 

func (s GetCommitInput) GoString() string

GoString returns the string representation

func (*GetCommitInput) SetCommitId added in v1.5.1 

func (s *GetCommitInput) SetCommitId(v string) *GetCommitInput

SetCommitId sets the CommitId field's value.

func (*GetCommitInput) SetRepositoryName added in v1.5.1 

func (s *GetCommitInput) SetRepositoryName(v string) *GetCommitInput

SetRepositoryName sets the RepositoryName field's value.

func (GetCommitInput) String added in v1.1.16 

func (s GetCommitInput) String() string

String returns the string representation

func (*GetCommitInput) Validate added in v1.1.24 

func (s *GetCommitInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetCommitOutput added in v1.1.16 

type GetCommitOutput struct {

	// A commit data type object that contains information about the specified commit.
	//
	// Commit is a required field
	Commit *Commit `locationName:"commit" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents the output of a get commit operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetCommitOutput

func (GetCommitOutput) GoString added in v1.1.16 

func (s GetCommitOutput) GoString() string

GoString returns the string representation

func (*GetCommitOutput) SetCommit added in v1.5.1 

func (s *GetCommitOutput) SetCommit(v *Commit) *GetCommitOutput

SetCommit sets the Commit field's value.

func (GetCommitOutput) String added in v1.1.16 

func (s GetCommitOutput) String() string

String returns the string representation

type GetDifferencesInput added in v1.6.16 

type GetDifferencesInput struct {

	// The branch, tag, HEAD, or other fully qualified reference used to identify
	// a commit.
	//
	// AfterCommitSpecifier is a required field
	AfterCommitSpecifier *string `locationName:"afterCommitSpecifier" type:"string" required:"true"`

	// The file path in which to check differences. Limits the results to this path.
	// Can also be used to specify the changed name of a directory or folder, if
	// it has changed. If not specified, differences will be shown for all paths.
	AfterPath *string `locationName:"afterPath" type:"string"`

	// The branch, tag, HEAD, or other fully qualified reference used to identify
	// a commit. For example, the full commit ID. Optional. If not specified, all
	// changes prior to the afterCommitSpecifier value will be shown. If you do
	// not use beforeCommitSpecifier in your request, consider limiting the results
	// with maxResults.
	BeforeCommitSpecifier *string `locationName:"beforeCommitSpecifier" type:"string"`

	// The file path in which to check for differences. Limits the results to this
	// path. Can also be used to specify the previous name of a directory or folder.
	// If beforePath and afterPath are not specified, differences will be shown
	// for all paths.
	BeforePath *string `locationName:"beforePath" type:"string"`

	// A non-negative integer used to limit the number of returned results.
	MaxResults *int64 `type:"integer"`

	// An enumeration token that when provided in a request, returns the next batch
	// of the results.
	NextToken *string `type:"string"`

	// The name of the repository where you want to get differences.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetDifferencesInput

func (GetDifferencesInput) GoString added in v1.6.16 

func (s GetDifferencesInput) GoString() string

GoString returns the string representation

func (*GetDifferencesInput) SetAfterCommitSpecifier added in v1.6.16 

func (s *GetDifferencesInput) SetAfterCommitSpecifier(v string) *GetDifferencesInput

SetAfterCommitSpecifier sets the AfterCommitSpecifier field's value.

func (*GetDifferencesInput) SetAfterPath added in v1.6.16 

func (s *GetDifferencesInput) SetAfterPath(v string) *GetDifferencesInput

SetAfterPath sets the AfterPath field's value.

func (*GetDifferencesInput) SetBeforeCommitSpecifier added in v1.6.16 

func (s *GetDifferencesInput) SetBeforeCommitSpecifier(v string) *GetDifferencesInput

SetBeforeCommitSpecifier sets the BeforeCommitSpecifier field's value.

func (*GetDifferencesInput) SetBeforePath added in v1.6.16 

func (s *GetDifferencesInput) SetBeforePath(v string) *GetDifferencesInput

SetBeforePath sets the BeforePath field's value.

func (*GetDifferencesInput) SetMaxResults added in v1.6.16 

func (s *GetDifferencesInput) SetMaxResults(v int64) *GetDifferencesInput

SetMaxResults sets the MaxResults field's value.

func (*GetDifferencesInput) SetNextToken added in v1.6.16 

func (s *GetDifferencesInput) SetNextToken(v string) *GetDifferencesInput

SetNextToken sets the NextToken field's value.

func (*GetDifferencesInput) SetRepositoryName added in v1.6.16 

func (s *GetDifferencesInput) SetRepositoryName(v string) *GetDifferencesInput

SetRepositoryName sets the RepositoryName field's value.

func (GetDifferencesInput) String added in v1.6.16 

func (s GetDifferencesInput) String() string

String returns the string representation

func (*GetDifferencesInput) Validate added in v1.6.16 

func (s *GetDifferencesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDifferencesOutput added in v1.6.16 

type GetDifferencesOutput struct {

	// A differences data type object that contains information about the differences,
	// including whether the difference is added, modified, or deleted (A, D, M).
	Differences []*Difference `locationName:"differences" type:"list"`

	// An enumeration token that can be used in a request to return the next batch
	// of the results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetDifferencesOutput

func (GetDifferencesOutput) GoString added in v1.6.16 

func (s GetDifferencesOutput) GoString() string

GoString returns the string representation

func (*GetDifferencesOutput) SetDifferences added in v1.6.16 

func (s *GetDifferencesOutput) SetDifferences(v []*Difference) *GetDifferencesOutput

SetDifferences sets the Differences field's value.

func (*GetDifferencesOutput) SetNextToken added in v1.6.16 

func (s *GetDifferencesOutput) SetNextToken(v string) *GetDifferencesOutput

SetNextToken sets the NextToken field's value.

func (GetDifferencesOutput) String added in v1.6.16 

func (s GetDifferencesOutput) String() string

String returns the string representation

type GetRepositoryInput 

type GetRepositoryInput struct {

	// The name of the repository to get information about.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a get repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryInput

func (GetRepositoryInput) GoString 

func (s GetRepositoryInput) GoString() string

GoString returns the string representation

func (*GetRepositoryInput) SetRepositoryName added in v1.5.1 

func (s *GetRepositoryInput) SetRepositoryName(v string) *GetRepositoryInput

SetRepositoryName sets the RepositoryName field's value.

func (GetRepositoryInput) String 

func (s GetRepositoryInput) String() string

String returns the string representation

func (*GetRepositoryInput) Validate added in v1.1.24 

func (s *GetRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetRepositoryOutput 

type GetRepositoryOutput struct {

	// Information about the repository.
	RepositoryMetadata *RepositoryMetadata `locationName:"repositoryMetadata" type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a get repository operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryOutput

func (GetRepositoryOutput) GoString 

func (s GetRepositoryOutput) GoString() string

GoString returns the string representation

func (*GetRepositoryOutput) SetRepositoryMetadata added in v1.5.1 

func (s *GetRepositoryOutput) SetRepositoryMetadata(v *RepositoryMetadata) *GetRepositoryOutput

SetRepositoryMetadata sets the RepositoryMetadata field's value.

func (GetRepositoryOutput) String 

func (s GetRepositoryOutput) String() string

String returns the string representation

type GetRepositoryTriggersInput added in v1.1.16 

type GetRepositoryTriggersInput struct {

	// The name of the repository for which the trigger is configured.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a get repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryTriggersInput

func (GetRepositoryTriggersInput) GoString added in v1.1.16 

func (s GetRepositoryTriggersInput) GoString() string

GoString returns the string representation

func (*GetRepositoryTriggersInput) SetRepositoryName added in v1.5.1 

func (s *GetRepositoryTriggersInput) SetRepositoryName(v string) *GetRepositoryTriggersInput

SetRepositoryName sets the RepositoryName field's value.

func (GetRepositoryTriggersInput) String added in v1.1.16 

func (s GetRepositoryTriggersInput) String() string

String returns the string representation

func (*GetRepositoryTriggersInput) Validate added in v1.1.24 

func (s *GetRepositoryTriggersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetRepositoryTriggersOutput added in v1.1.16 

type GetRepositoryTriggersOutput struct {

	// The system-generated unique ID for the trigger.
	ConfigurationId *string `locationName:"configurationId" type:"string"`

	// The JSON block of configuration information for each trigger.
	Triggers []*RepositoryTrigger `locationName:"triggers" type:"list"`
	// contains filtered or unexported fields
}

Represents the output of a get repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/GetRepositoryTriggersOutput

func (GetRepositoryTriggersOutput) GoString added in v1.1.16 

func (s GetRepositoryTriggersOutput) GoString() string

GoString returns the string representation

func (*GetRepositoryTriggersOutput) SetConfigurationId added in v1.5.1 

func (s *GetRepositoryTriggersOutput) SetConfigurationId(v string) *GetRepositoryTriggersOutput

SetConfigurationId sets the ConfigurationId field's value.

func (*GetRepositoryTriggersOutput) SetTriggers added in v1.5.1 

func (s *GetRepositoryTriggersOutput) SetTriggers(v []*RepositoryTrigger) *GetRepositoryTriggersOutput

SetTriggers sets the Triggers field's value.

func (GetRepositoryTriggersOutput) String added in v1.1.16 

func (s GetRepositoryTriggersOutput) String() string

String returns the string representation

type ListBranchesInput 

type ListBranchesInput struct {

	// An enumeration token that allows the operation to batch the results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The name of the repository that contains the branches.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a list branches operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListBranchesInput

func (ListBranchesInput) GoString 

func (s ListBranchesInput) GoString() string

GoString returns the string representation

func (*ListBranchesInput) SetNextToken added in v1.5.1 

func (s *ListBranchesInput) SetNextToken(v string) *ListBranchesInput

SetNextToken sets the NextToken field's value.

func (*ListBranchesInput) SetRepositoryName added in v1.5.1 

func (s *ListBranchesInput) SetRepositoryName(v string) *ListBranchesInput

SetRepositoryName sets the RepositoryName field's value.

func (ListBranchesInput) String 

func (s ListBranchesInput) String() string

String returns the string representation

func (*ListBranchesInput) Validate added in v1.1.24 

func (s *ListBranchesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListBranchesOutput 

type ListBranchesOutput struct {

	// The list of branch names.
	Branches []*string `locationName:"branches" type:"list"`

	// An enumeration token that returns the batch of the results.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Represents the output of a list branches operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListBranchesOutput

func (ListBranchesOutput) GoString 

func (s ListBranchesOutput) GoString() string

GoString returns the string representation

func (*ListBranchesOutput) SetBranches added in v1.5.1 

func (s *ListBranchesOutput) SetBranches(v []*string) *ListBranchesOutput

SetBranches sets the Branches field's value.

func (*ListBranchesOutput) SetNextToken added in v1.5.1 

func (s *ListBranchesOutput) SetNextToken(v string) *ListBranchesOutput

SetNextToken sets the NextToken field's value.

func (ListBranchesOutput) String 

func (s ListBranchesOutput) String() string

String returns the string representation

type ListRepositoriesInput 

type ListRepositoriesInput struct {

	// An enumeration token that allows the operation to batch the results of the
	// operation. Batch sizes are 1,000 for list repository operations. When the
	// client sends the token back to AWS CodeCommit, another page of 1,000 records
	// is retrieved.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The order in which to sort the results of a list repositories operation.
	Order *string `locationName:"order" type:"string" enum:"OrderEnum"`

	// The criteria used to sort the results of a list repositories operation.
	SortBy *string `locationName:"sortBy" type:"string" enum:"SortByEnum"`
	// contains filtered or unexported fields
}

Represents the input of a list repositories operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListRepositoriesInput

func (ListRepositoriesInput) GoString 

func (s ListRepositoriesInput) GoString() string

GoString returns the string representation

func (*ListRepositoriesInput) SetNextToken added in v1.5.1 

func (s *ListRepositoriesInput) SetNextToken(v string) *ListRepositoriesInput

SetNextToken sets the NextToken field's value.

func (*ListRepositoriesInput) SetOrder added in v1.5.1 

func (s *ListRepositoriesInput) SetOrder(v string) *ListRepositoriesInput

SetOrder sets the Order field's value.

func (*ListRepositoriesInput) SetSortBy added in v1.5.1 

func (s *ListRepositoriesInput) SetSortBy(v string) *ListRepositoriesInput

SetSortBy sets the SortBy field's value.

func (ListRepositoriesInput) String 

func (s ListRepositoriesInput) String() string

String returns the string representation

type ListRepositoriesOutput 

type ListRepositoriesOutput struct {

	// An enumeration token that allows the operation to batch the results of the
	// operation. Batch sizes are 1,000 for list repository operations. When the
	// client sends the token back to AWS CodeCommit, another page of 1,000 records
	// is retrieved.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Lists the repositories called by the list repositories operation.
	Repositories []*RepositoryNameIdPair `locationName:"repositories" type:"list"`
	// contains filtered or unexported fields
}

Represents the output of a list repositories operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/ListRepositoriesOutput

func (ListRepositoriesOutput) GoString 

func (s ListRepositoriesOutput) GoString() string

GoString returns the string representation

func (*ListRepositoriesOutput) SetNextToken added in v1.5.1 

func (s *ListRepositoriesOutput) SetNextToken(v string) *ListRepositoriesOutput

SetNextToken sets the NextToken field's value.

func (*ListRepositoriesOutput) SetRepositories added in v1.5.1 

func (s *ListRepositoriesOutput) SetRepositories(v []*RepositoryNameIdPair) *ListRepositoriesOutput

SetRepositories sets the Repositories field's value.

func (ListRepositoriesOutput) String 

func (s ListRepositoriesOutput) String() string

String returns the string representation

type PutRepositoryTriggersInput added in v1.1.16 

type PutRepositoryTriggersInput struct {

	// The name of the repository where you want to create or update the trigger.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`

	// The JSON block of configuration information for each trigger.
	//
	// Triggers is a required field
	Triggers []*RepositoryTrigger `locationName:"triggers" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Represents the input ofa put repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/PutRepositoryTriggersInput

func (PutRepositoryTriggersInput) GoString added in v1.1.16 

func (s PutRepositoryTriggersInput) GoString() string

GoString returns the string representation

func (*PutRepositoryTriggersInput) SetRepositoryName added in v1.5.1 

func (s *PutRepositoryTriggersInput) SetRepositoryName(v string) *PutRepositoryTriggersInput

SetRepositoryName sets the RepositoryName field's value.

func (*PutRepositoryTriggersInput) SetTriggers added in v1.5.1 

func (s *PutRepositoryTriggersInput) SetTriggers(v []*RepositoryTrigger) *PutRepositoryTriggersInput

SetTriggers sets the Triggers field's value.

func (PutRepositoryTriggersInput) String added in v1.1.16 

func (s PutRepositoryTriggersInput) String() string

String returns the string representation

func (*PutRepositoryTriggersInput) Validate added in v1.1.24 

func (s *PutRepositoryTriggersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PutRepositoryTriggersOutput added in v1.1.16 

type PutRepositoryTriggersOutput struct {

	// The system-generated unique ID for the create or update operation.
	ConfigurationId *string `locationName:"configurationId" type:"string"`
	// contains filtered or unexported fields
}

Represents the output of a put repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/PutRepositoryTriggersOutput

func (PutRepositoryTriggersOutput) GoString added in v1.1.16 

func (s PutRepositoryTriggersOutput) GoString() string

GoString returns the string representation

func (*PutRepositoryTriggersOutput) SetConfigurationId added in v1.5.1 

func (s *PutRepositoryTriggersOutput) SetConfigurationId(v string) *PutRepositoryTriggersOutput

SetConfigurationId sets the ConfigurationId field's value.

func (PutRepositoryTriggersOutput) String added in v1.1.16 

func (s PutRepositoryTriggersOutput) String() string

String returns the string representation

type RepositoryMetadata 

type RepositoryMetadata struct {

	// The ID of the AWS account associated with the repository.
	AccountId *string `locationName:"accountId" type:"string"`

	// The Amazon Resource Name (ARN) of the repository.
	Arn *string `type:"string"`

	// The URL to use for cloning the repository over HTTPS.
	CloneUrlHttp *string `locationName:"cloneUrlHttp" type:"string"`

	// The URL to use for cloning the repository over SSH.
	CloneUrlSsh *string `locationName:"cloneUrlSsh" type:"string"`

	// The date and time the repository was created, in timestamp format.
	CreationDate *time.Time `locationName:"creationDate" type:"timestamp" timestampFormat:"unix"`

	// The repository's default branch name.
	DefaultBranch *string `locationName:"defaultBranch" min:"1" type:"string"`

	// The date and time the repository was last modified, in timestamp format.
	LastModifiedDate *time.Time `locationName:"lastModifiedDate" type:"timestamp" timestampFormat:"unix"`

	// A comment or description about the repository.
	RepositoryDescription *string `locationName:"repositoryDescription" type:"string"`

	// The ID of the repository.
	RepositoryId *string `locationName:"repositoryId" type:"string"`

	// The repository's name.
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string"`
	// contains filtered or unexported fields
}

Information about a repository. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/RepositoryMetadata

func (RepositoryMetadata) GoString 

func (s RepositoryMetadata) GoString() string

GoString returns the string representation

func (*RepositoryMetadata) SetAccountId added in v1.5.1 

func (s *RepositoryMetadata) SetAccountId(v string) *RepositoryMetadata

SetAccountId sets the AccountId field's value.

func (*RepositoryMetadata) SetArn added in v1.5.1 

func (s *RepositoryMetadata) SetArn(v string) *RepositoryMetadata

SetArn sets the Arn field's value.

func (*RepositoryMetadata) SetCloneUrlHttp added in v1.5.1 

func (s *RepositoryMetadata) SetCloneUrlHttp(v string) *RepositoryMetadata

SetCloneUrlHttp sets the CloneUrlHttp field's value.

func (*RepositoryMetadata) SetCloneUrlSsh added in v1.5.1 

func (s *RepositoryMetadata) SetCloneUrlSsh(v string) *RepositoryMetadata

SetCloneUrlSsh sets the CloneUrlSsh field's value.

func (*RepositoryMetadata) SetCreationDate added in v1.5.1 

func (s *RepositoryMetadata) SetCreationDate(v time.Time) *RepositoryMetadata

SetCreationDate sets the CreationDate field's value.

func (*RepositoryMetadata) SetDefaultBranch added in v1.5.1 

func (s *RepositoryMetadata) SetDefaultBranch(v string) *RepositoryMetadata

SetDefaultBranch sets the DefaultBranch field's value.

func (*RepositoryMetadata) SetLastModifiedDate added in v1.5.1 

func (s *RepositoryMetadata) SetLastModifiedDate(v time.Time) *RepositoryMetadata

SetLastModifiedDate sets the LastModifiedDate field's value.

func (*RepositoryMetadata) SetRepositoryDescription added in v1.5.1 

func (s *RepositoryMetadata) SetRepositoryDescription(v string) *RepositoryMetadata

SetRepositoryDescription sets the RepositoryDescription field's value.

func (*RepositoryMetadata) SetRepositoryId added in v1.5.1 

func (s *RepositoryMetadata) SetRepositoryId(v string) *RepositoryMetadata

SetRepositoryId sets the RepositoryId field's value.

func (*RepositoryMetadata) SetRepositoryName added in v1.5.1 

func (s *RepositoryMetadata) SetRepositoryName(v string) *RepositoryMetadata

SetRepositoryName sets the RepositoryName field's value.

func (RepositoryMetadata) String 

func (s RepositoryMetadata) String() string

String returns the string representation

type RepositoryNameIdPair added in v0.9.9 

type RepositoryNameIdPair struct {

	// The ID associated with the repository.
	RepositoryId *string `locationName:"repositoryId" type:"string"`

	// The name associated with the repository.
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string"`
	// contains filtered or unexported fields
}

Information about a repository name and ID. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/RepositoryNameIdPair

func (RepositoryNameIdPair) GoString added in v0.9.9 

func (s RepositoryNameIdPair) GoString() string

GoString returns the string representation

func (*RepositoryNameIdPair) SetRepositoryId added in v1.5.1 

func (s *RepositoryNameIdPair) SetRepositoryId(v string) *RepositoryNameIdPair

SetRepositoryId sets the RepositoryId field's value.

func (*RepositoryNameIdPair) SetRepositoryName added in v1.5.1 

func (s *RepositoryNameIdPair) SetRepositoryName(v string) *RepositoryNameIdPair

SetRepositoryName sets the RepositoryName field's value.

func (RepositoryNameIdPair) String added in v0.9.9 

func (s RepositoryNameIdPair) String() string

String returns the string representation

type RepositoryTrigger added in v1.1.16 

type RepositoryTrigger struct {

	// The branches that will be included in the trigger configuration. If no branches
	// are specified, the trigger will apply to all branches.
	Branches []*string `locationName:"branches" type:"list"`

	// Any custom data associated with the trigger that will be included in the
	// information sent to the target of the trigger.
	CustomData *string `locationName:"customData" type:"string"`

	// The ARN of the resource that is the target for a trigger. For example, the
	// ARN of a topic in Amazon Simple Notification Service (SNS).
	//
	// DestinationArn is a required field
	DestinationArn *string `locationName:"destinationArn" type:"string" required:"true"`

	// The repository events that will cause the trigger to run actions in another
	// service, such as sending a notification through Amazon Simple Notification
	// Service (SNS).
	//
	// The valid value "all" cannot be used with any other values.
	//
	// Events is a required field
	Events []*string `locationName:"events" type:"list" required:"true"`

	// The name of the trigger.
	//
	// Name is a required field
	Name *string `locationName:"name" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information about a trigger for a repository. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/RepositoryTrigger

func (RepositoryTrigger) GoString added in v1.1.16 

func (s RepositoryTrigger) GoString() string

GoString returns the string representation

func (*RepositoryTrigger) SetBranches added in v1.5.1 

func (s *RepositoryTrigger) SetBranches(v []*string) *RepositoryTrigger

SetBranches sets the Branches field's value.

func (*RepositoryTrigger) SetCustomData added in v1.5.1 

func (s *RepositoryTrigger) SetCustomData(v string) *RepositoryTrigger

SetCustomData sets the CustomData field's value.

func (*RepositoryTrigger) SetDestinationArn added in v1.5.1 

func (s *RepositoryTrigger) SetDestinationArn(v string) *RepositoryTrigger

SetDestinationArn sets the DestinationArn field's value.

func (*RepositoryTrigger) SetEvents added in v1.5.1 

func (s *RepositoryTrigger) SetEvents(v []*string) *RepositoryTrigger

SetEvents sets the Events field's value.

func (*RepositoryTrigger) SetName added in v1.5.1 

func (s *RepositoryTrigger) SetName(v string) *RepositoryTrigger

SetName sets the Name field's value.

func (RepositoryTrigger) String added in v1.1.16 

func (s RepositoryTrigger) String() string

String returns the string representation

func (*RepositoryTrigger) Validate added in v1.6.16 

func (s *RepositoryTrigger) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RepositoryTriggerExecutionFailure added in v1.1.16 

type RepositoryTriggerExecutionFailure struct {

	// Additional message information about the trigger that did not run.
	FailureMessage *string `locationName:"failureMessage" type:"string"`

	// The name of the trigger that did not run.
	Trigger *string `locationName:"trigger" type:"string"`
	// contains filtered or unexported fields
}

A trigger failed to run. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/RepositoryTriggerExecutionFailure

func (RepositoryTriggerExecutionFailure) GoString added in v1.1.16 

func (s RepositoryTriggerExecutionFailure) GoString() string

GoString returns the string representation

func (*RepositoryTriggerExecutionFailure) SetFailureMessage added in v1.5.1 

func (s *RepositoryTriggerExecutionFailure) SetFailureMessage(v string) *RepositoryTriggerExecutionFailure

SetFailureMessage sets the FailureMessage field's value.

func (*RepositoryTriggerExecutionFailure) SetTrigger added in v1.5.1 

func (s *RepositoryTriggerExecutionFailure) SetTrigger(v string) *RepositoryTriggerExecutionFailure

SetTrigger sets the Trigger field's value.

func (RepositoryTriggerExecutionFailure) String added in v1.1.16 

func (s RepositoryTriggerExecutionFailure) String() string

String returns the string representation

type TestRepositoryTriggersInput added in v1.1.16 

type TestRepositoryTriggersInput struct {

	// The name of the repository in which to test the triggers.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`

	// The list of triggers to test.
	//
	// Triggers is a required field
	Triggers []*RepositoryTrigger `locationName:"triggers" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a test repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/TestRepositoryTriggersInput

func (TestRepositoryTriggersInput) GoString added in v1.1.16 

func (s TestRepositoryTriggersInput) GoString() string

GoString returns the string representation

func (*TestRepositoryTriggersInput) SetRepositoryName added in v1.5.1 

func (s *TestRepositoryTriggersInput) SetRepositoryName(v string) *TestRepositoryTriggersInput

SetRepositoryName sets the RepositoryName field's value.

func (*TestRepositoryTriggersInput) SetTriggers added in v1.5.1 

func (s *TestRepositoryTriggersInput) SetTriggers(v []*RepositoryTrigger) *TestRepositoryTriggersInput

SetTriggers sets the Triggers field's value.

func (TestRepositoryTriggersInput) String added in v1.1.16 

func (s TestRepositoryTriggersInput) String() string

String returns the string representation

func (*TestRepositoryTriggersInput) Validate added in v1.1.24 

func (s *TestRepositoryTriggersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TestRepositoryTriggersOutput added in v1.1.16 

type TestRepositoryTriggersOutput struct {

	// The list of triggers that were not able to be tested. This list provides
	// the names of the triggers that could not be tested, separated by commas.
	FailedExecutions []*RepositoryTriggerExecutionFailure `locationName:"failedExecutions" type:"list"`

	// The list of triggers that were successfully tested. This list provides the
	// names of the triggers that were successfully tested, separated by commas.
	SuccessfulExecutions []*string `locationName:"successfulExecutions" type:"list"`
	// contains filtered or unexported fields
}

Represents the output of a test repository triggers operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/TestRepositoryTriggersOutput

func (TestRepositoryTriggersOutput) GoString added in v1.1.16 

func (s TestRepositoryTriggersOutput) GoString() string

GoString returns the string representation

func (*TestRepositoryTriggersOutput) SetFailedExecutions added in v1.5.1 

func (s *TestRepositoryTriggersOutput) SetFailedExecutions(v []*RepositoryTriggerExecutionFailure) *TestRepositoryTriggersOutput

SetFailedExecutions sets the FailedExecutions field's value.

func (*TestRepositoryTriggersOutput) SetSuccessfulExecutions added in v1.5.1 

func (s *TestRepositoryTriggersOutput) SetSuccessfulExecutions(v []*string) *TestRepositoryTriggersOutput

SetSuccessfulExecutions sets the SuccessfulExecutions field's value.

func (TestRepositoryTriggersOutput) String added in v1.1.16 

func (s TestRepositoryTriggersOutput) String() string

String returns the string representation

type UpdateDefaultBranchInput 

type UpdateDefaultBranchInput struct {

	// The name of the branch to set as the default.
	//
	// DefaultBranchName is a required field
	DefaultBranchName *string `locationName:"defaultBranchName" min:"1" type:"string" required:"true"`

	// The name of the repository to set or change the default branch for.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of an update default branch operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateDefaultBranchInput

func (UpdateDefaultBranchInput) GoString 

func (s UpdateDefaultBranchInput) GoString() string

GoString returns the string representation

func (*UpdateDefaultBranchInput) SetDefaultBranchName added in v1.5.1 

func (s *UpdateDefaultBranchInput) SetDefaultBranchName(v string) *UpdateDefaultBranchInput

SetDefaultBranchName sets the DefaultBranchName field's value.

func (*UpdateDefaultBranchInput) SetRepositoryName added in v1.5.1 

func (s *UpdateDefaultBranchInput) SetRepositoryName(v string) *UpdateDefaultBranchInput

SetRepositoryName sets the RepositoryName field's value.

func (UpdateDefaultBranchInput) String 

func (s UpdateDefaultBranchInput) String() string

String returns the string representation

func (*UpdateDefaultBranchInput) Validate added in v1.1.24 

func (s *UpdateDefaultBranchInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateDefaultBranchOutput 

type UpdateDefaultBranchOutput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateDefaultBranchOutput

func (UpdateDefaultBranchOutput) GoString 

func (s UpdateDefaultBranchOutput) GoString() string

GoString returns the string representation

func (UpdateDefaultBranchOutput) String 

func (s UpdateDefaultBranchOutput) String() string

String returns the string representation

type UpdateRepositoryDescriptionInput 

type UpdateRepositoryDescriptionInput struct {

	// The new comment or description for the specified repository. Repository descriptions
	// are limited to 1,000 characters.
	RepositoryDescription *string `locationName:"repositoryDescription" type:"string"`

	// The name of the repository to set or change the comment or description for.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of an update repository description operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryDescriptionInput

func (UpdateRepositoryDescriptionInput) GoString 

func (s UpdateRepositoryDescriptionInput) GoString() string

GoString returns the string representation

func (*UpdateRepositoryDescriptionInput) SetRepositoryDescription added in v1.5.1 

func (s *UpdateRepositoryDescriptionInput) SetRepositoryDescription(v string) *UpdateRepositoryDescriptionInput

SetRepositoryDescription sets the RepositoryDescription field's value.

func (*UpdateRepositoryDescriptionInput) SetRepositoryName added in v1.5.1 

func (s *UpdateRepositoryDescriptionInput) SetRepositoryName(v string) *UpdateRepositoryDescriptionInput

SetRepositoryName sets the RepositoryName field's value.

func (UpdateRepositoryDescriptionInput) String 

func (s UpdateRepositoryDescriptionInput) String() string

String returns the string representation

func (*UpdateRepositoryDescriptionInput) Validate added in v1.1.24 

func (s *UpdateRepositoryDescriptionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateRepositoryDescriptionOutput 

type UpdateRepositoryDescriptionOutput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryDescriptionOutput

func (UpdateRepositoryDescriptionOutput) GoString 

func (s UpdateRepositoryDescriptionOutput) GoString() string

GoString returns the string representation

func (UpdateRepositoryDescriptionOutput) String 

func (s UpdateRepositoryDescriptionOutput) String() string

String returns the string representation

type UpdateRepositoryNameInput 

type UpdateRepositoryNameInput struct {

	// The new name for the repository.
	//
	// NewName is a required field
	NewName *string `locationName:"newName" min:"1" type:"string" required:"true"`

	// The existing name of the repository.
	//
	// OldName is a required field
	OldName *string `locationName:"oldName" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of an update repository description operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryNameInput

func (UpdateRepositoryNameInput) GoString 

func (s UpdateRepositoryNameInput) GoString() string

GoString returns the string representation

func (*UpdateRepositoryNameInput) SetNewName added in v1.5.1 

func (s *UpdateRepositoryNameInput) SetNewName(v string) *UpdateRepositoryNameInput

SetNewName sets the NewName field's value.

func (*UpdateRepositoryNameInput) SetOldName added in v1.5.1 

func (s *UpdateRepositoryNameInput) SetOldName(v string) *UpdateRepositoryNameInput

SetOldName sets the OldName field's value.

func (UpdateRepositoryNameInput) String 

func (s UpdateRepositoryNameInput) String() string

String returns the string representation

func (*UpdateRepositoryNameInput) Validate added in v1.1.24 

func (s *UpdateRepositoryNameInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateRepositoryNameOutput 

type UpdateRepositoryNameOutput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UpdateRepositoryNameOutput

func (UpdateRepositoryNameOutput) GoString 

func (s UpdateRepositoryNameOutput) GoString() string

GoString returns the string representation

func (UpdateRepositoryNameOutput) String 

func (s UpdateRepositoryNameOutput) String() string

String returns the string representation

type UserInfo added in v1.1.16 

type UserInfo struct {

	// The date when the specified commit was pushed to the repository.
	Date *string `locationName:"date" type:"string"`

	// The email address associated with the user who made the commit, if any.
	Email *string `locationName:"email" type:"string"`

	// The name of the user who made the specified commit.
	Name *string `locationName:"name" type:"string"`
	// contains filtered or unexported fields
}

Information about the user who made a specified commit. Please also see https://docs.aws.amazon.com/goto/WebAPI/codecommit-2015-04-13/UserInfo

func (UserInfo) GoString added in v1.1.16 

func (s UserInfo) GoString() string

GoString returns the string representation

func (*UserInfo) SetDate added in v1.5.1 

func (s *UserInfo) SetDate(v string) *UserInfo

SetDate sets the Date field's value.

func (*UserInfo) SetEmail added in v1.5.1 

func (s *UserInfo) SetEmail(v string) *UserInfo

SetEmail sets the Email field's value.

func (*UserInfo) SetName added in v1.5.1 

func (s *UserInfo) SetName(v string) *UserInfo

SetName sets the Name field's value.

func (UserInfo) String added in v1.1.16 

func (s UserInfo) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package codecommitiface provides an interface to enable mocking the AWS CodeCommit service client for testing your code.
 Package codecommitiface provides an interface to enable mocking the AWS CodeCommit service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.