blockchain

package
v0.9.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 23, 2019 License: Apache-2.0 Imports: 52 Imported by: 30

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var (
	// ErrInvalidTipHeight is the error returned when the block height is not valid
	ErrInvalidTipHeight = errors.New("invalid tip height")
	// ErrInvalidBlock is the error returned when the block is not valid
	ErrInvalidBlock = errors.New("failed to validate the block")
	// ErrActionNonce is the error when the nonce of the action is wrong
	ErrActionNonce = errors.New("invalid action nonce")
	// ErrInsufficientGas indicates the error of insufficient gas value for data storage
	ErrInsufficientGas = errors.New("insufficient intrinsic gas value")
	// ErrBalance indicates the error of balance
	ErrBalance = errors.New("invalid balance")
)
View Source 
var (

	// ErrNotOpened indicates db is not opened
	ErrNotOpened = errors.New("DB is not opened")
)

Functions

func PickAction added in v0.4.4 

func PickAction(gasLimit uint64, actionIterator actioniterator.ActionIterator) ([]action.SealedEnvelope, error)

PickAction returns picked action list

Types

type BlockCreationSubscriber added in v0.4.4 

type BlockCreationSubscriber interface {
	HandleBlock(*block.Block) error
}

BlockCreationSubscriber is an interface which will get notified when a block is created

type Blockchain 

type Blockchain interface {
	lifecycle.StartStopper

	// Balance returns balance of an account
	Balance(addr string) (*big.Int, error)
	// Nonce returns the nonce if the account exists
	Nonce(addr string) (uint64, error)
	// CreateState adds a new account with initial balance to the factory
	CreateState(addr string, init *big.Int) (*state.Account, error)
	// CandidatesByHeight returns the candidate list by a given height
	CandidatesByHeight(height uint64) ([]*state.Candidate, error)
	// ProductivityByEpoch returns the number of produced blocks per delegate in an epoch
	ProductivityByEpoch(epochNum uint64) (uint64, map[string]uint64, error)
	// For exposing blockchain states
	// GetHeightByHash returns Block's height by hash
	GetHeightByHash(h hash.Hash256) (uint64, error)
	// GetHashByHeight returns Block's hash by height
	GetHashByHeight(height uint64) (hash.Hash256, error)
	// GetBlockByHeight returns Block by height
	GetBlockByHeight(height uint64) (*block.Block, error)
	// GetBlockByHash returns Block by hash
	GetBlockByHash(h hash.Hash256) (*block.Block, error)
	// BlockHeaderByHeight return block header by height
	BlockHeaderByHeight(height uint64) (*block.Header, error)
	// BlockHeaderByHash return block header by hash
	BlockHeaderByHash(h hash.Hash256) (*block.Header, error)
	// BlockFooterByHeight return block footer by height
	BlockFooterByHeight(height uint64) (*block.Footer, error)
	// BlockFooterByHash return block footer by hash
	BlockFooterByHash(h hash.Hash256) (*block.Footer, error)
	// GetTotalActions returns the total number of actions
	GetTotalActions() (uint64, error)
	// GetNumActions returns the number of actions in certain block
	GetNumActions(height uint64) (uint64, error)
	// GetTranferAmount returns the transfer amount
	GetTranferAmount(height uint64) (*big.Int, error)
	// GetReceiptByActionHash returns the receipt by action hash
	GetReceiptByActionHash(h hash.Hash256) (*action.Receipt, error)
	// GetActionsFromIndex returns action hash from index
	GetActionsFromIndex(uint64, uint64) ([][]byte, error)
	// GetActionsByAddress returns actions by address
	GetActionsByAddress(string, uint64, uint64) ([][]byte, error)
	// GetActionCountByAddress returns action count by address
	GetActionCountByAddress(address string) (uint64, error)
	// GetActionByActionHash returns action by action hash
	GetActionByActionHash(h hash.Hash256) (action.SealedEnvelope, error)
	// GetBlockHashByActionHash returns Block hash by action hash
	GetBlockHashByActionHash(h hash.Hash256) (hash.Hash256, error)
	// GetReceiptsByHeight returns action receipts by block height
	GetReceiptsByHeight(height uint64) ([]*action.Receipt, error)
	// GetFactory returns the state factory
	GetFactory() factory.Factory
	// ChainID returns the chain ID
	ChainID() uint32
	// ChainAddress returns chain address on parent chain, the root chain return empty.
	ChainAddress() string
	// TipHash returns tip block's hash
	TipHash() hash.Hash256
	// TipHeight returns tip block's height
	TipHeight() uint64
	// StateByAddr returns account of a given address
	StateByAddr(address string) (*state.Account, error)
	// RecoverChainAndState recovers the chain to target height and refresh state db if necessary
	RecoverChainAndState(targetHeight uint64) error
	// GenesisTimestamp returns the timestamp of genesis
	GenesisTimestamp() int64

	// For block operations
	// MintNewBlock creates a new block with given actions
	// Note: the coinbase transfer will be added to the given transfers when minting a new block
	MintNewBlock(
		actionMap map[string][]action.SealedEnvelope,
		timestamp time.Time,
	) (*block.Block, error)
	// CommitBlock validates and appends a block to the chain
	CommitBlock(blk *block.Block) error
	// ValidateBlock validates a new block before adding it to the blockchain
	ValidateBlock(blk *block.Block) error

	// For action operations
	// Validator returns the current validator object
	Validator() Validator
	// SetValidator sets the current validator object
	SetValidator(val Validator)

	// For smart contract operations
	// ExecuteContractRead runs a read-only smart contract operation, this is done off the network since it does not
	// cause any state change
	ExecuteContractRead(caller address.Address, ex *action.Execution) ([]byte, *action.Receipt, error)

	// AddSubscriber make you listen to every single produced block
	AddSubscriber(BlockCreationSubscriber) error

	// RemoveSubscriber make you listen to every single produced block
	RemoveSubscriber(BlockCreationSubscriber) error
}

Blockchain represents the blockchain data structure and hosts the APIs to access it

func NewBlockchain 

func NewBlockchain(cfg config.Config, opts ...Option) Blockchain

NewBlockchain creates a new blockchain and DB instance

type IndexBuilder added in v0.4.4 

type IndexBuilder struct {
	// contains filtered or unexported fields
}

IndexBuilder defines the index builder

func NewIndexBuilder added in v0.4.4 

func NewIndexBuilder(chain Blockchain, reindex bool) (*IndexBuilder, error)

NewIndexBuilder instantiates an index builder

func (*IndexBuilder) HandleBlock added in v0.4.4 

func (ib *IndexBuilder) HandleBlock(blk *block.Block) error

HandleBlock handles the block and create the indices for the actions and receipts in it

func (*IndexBuilder) Start added in v0.4.4 

func (ib *IndexBuilder) Start(_ context.Context) error

Start starts the index builder

func (*IndexBuilder) Stop added in v0.4.4 

func (ib *IndexBuilder) Stop(_ context.Context) error

Stop stops the index builder

type Option added in v0.3.0 

type Option func(*blockchain, config.Config) error

Option sets blockchain construction parameter

func BoltDBDaoOption added in v0.3.0 

func BoltDBDaoOption() Option

BoltDBDaoOption sets blockchain's dao with BoltDB from config.Chain.ChainDBPath

func ClockOption added in v0.3.0 

func ClockOption(clk clock.Clock) Option

ClockOption overrides the default clock

func DefaultStateFactoryOption added in v0.3.0 

func DefaultStateFactoryOption() Option

DefaultStateFactoryOption sets blockchain's sf from config

func InMemDaoOption added in v0.3.0 

func InMemDaoOption() Option

InMemDaoOption sets blockchain's dao with MemKVStore

func InMemStateFactoryOption added in v0.3.0 

func InMemStateFactoryOption() Option

InMemStateFactoryOption sets blockchain's factory.Factory as in memory sf

func PrecreatedDaoOption added in v0.3.0 

func PrecreatedDaoOption(dao *blockDAO) Option

PrecreatedDaoOption sets blockchain's dao

func PrecreatedStateFactoryOption added in v0.3.0 

func PrecreatedStateFactoryOption(sf factory.Factory) Option

PrecreatedStateFactoryOption sets blockchain's state.Factory to sf

func RegistryOption added in v0.5.0 

func RegistryOption(registry *protocol.Registry) Option

RegistryOption sets the blockchain with the protocol registry

type Validator added in v0.2.0 

type Validator interface {
	// Validate validates the given block's content
	Validate(block *block.Block, tipHeight uint64, tipHash hash.Hash256) error
	// AddActionValidators add validators
	AddActionValidators(...protocol.ActionValidator)
	AddActionEnvelopeValidators(...protocol.ActionEnvelopeValidator)
}

Validator is the interface of validator

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.