route53

package
v1.5.12 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 30, 2016 License: Apache-2.0 Imports: 14 Imported by: 0

Documentation

Overview

Package route53 provides a client for Amazon Route 53.

Index

Examples

Constants

View Source
const (
	// ChangeActionCreate is a ChangeAction enum value
	ChangeActionCreate = "CREATE"

	// ChangeActionDelete is a ChangeAction enum value
	ChangeActionDelete = "DELETE"

	// ChangeActionUpsert is a ChangeAction enum value
	ChangeActionUpsert = "UPSERT"
)
View Source
const (
	// ChangeStatusPending is a ChangeStatus enum value
	ChangeStatusPending = "PENDING"

	// ChangeStatusInsync is a ChangeStatus enum value
	ChangeStatusInsync = "INSYNC"
)
View Source
const (
	// CloudWatchRegionUsEast1 is a CloudWatchRegion enum value
	CloudWatchRegionUsEast1 = "us-east-1"

	// CloudWatchRegionUsEast2 is a CloudWatchRegion enum value
	CloudWatchRegionUsEast2 = "us-east-2"

	// CloudWatchRegionUsWest1 is a CloudWatchRegion enum value
	CloudWatchRegionUsWest1 = "us-west-1"

	// CloudWatchRegionUsWest2 is a CloudWatchRegion enum value
	CloudWatchRegionUsWest2 = "us-west-2"

	// CloudWatchRegionEuCentral1 is a CloudWatchRegion enum value
	CloudWatchRegionEuCentral1 = "eu-central-1"

	// CloudWatchRegionEuWest1 is a CloudWatchRegion enum value
	CloudWatchRegionEuWest1 = "eu-west-1"

	// CloudWatchRegionApSouth1 is a CloudWatchRegion enum value
	CloudWatchRegionApSouth1 = "ap-south-1"

	// CloudWatchRegionApSoutheast1 is a CloudWatchRegion enum value
	CloudWatchRegionApSoutheast1 = "ap-southeast-1"

	// CloudWatchRegionApSoutheast2 is a CloudWatchRegion enum value
	CloudWatchRegionApSoutheast2 = "ap-southeast-2"

	// CloudWatchRegionApNortheast1 is a CloudWatchRegion enum value
	CloudWatchRegionApNortheast1 = "ap-northeast-1"

	// CloudWatchRegionApNortheast2 is a CloudWatchRegion enum value
	CloudWatchRegionApNortheast2 = "ap-northeast-2"

	// CloudWatchRegionSaEast1 is a CloudWatchRegion enum value
	CloudWatchRegionSaEast1 = "sa-east-1"
)
View Source
const (
	// ComparisonOperatorGreaterThanOrEqualToThreshold is a ComparisonOperator enum value
	ComparisonOperatorGreaterThanOrEqualToThreshold = "GreaterThanOrEqualToThreshold"

	// ComparisonOperatorGreaterThanThreshold is a ComparisonOperator enum value
	ComparisonOperatorGreaterThanThreshold = "GreaterThanThreshold"

	// ComparisonOperatorLessThanThreshold is a ComparisonOperator enum value
	ComparisonOperatorLessThanThreshold = "LessThanThreshold"

	// ComparisonOperatorLessThanOrEqualToThreshold is a ComparisonOperator enum value
	ComparisonOperatorLessThanOrEqualToThreshold = "LessThanOrEqualToThreshold"
)
View Source
const (
	// HealthCheckRegionUsEast1 is a HealthCheckRegion enum value
	HealthCheckRegionUsEast1 = "us-east-1"

	// HealthCheckRegionUsWest1 is a HealthCheckRegion enum value
	HealthCheckRegionUsWest1 = "us-west-1"

	// HealthCheckRegionUsWest2 is a HealthCheckRegion enum value
	HealthCheckRegionUsWest2 = "us-west-2"

	// HealthCheckRegionEuWest1 is a HealthCheckRegion enum value
	HealthCheckRegionEuWest1 = "eu-west-1"

	// HealthCheckRegionApSoutheast1 is a HealthCheckRegion enum value
	HealthCheckRegionApSoutheast1 = "ap-southeast-1"

	// HealthCheckRegionApSoutheast2 is a HealthCheckRegion enum value
	HealthCheckRegionApSoutheast2 = "ap-southeast-2"

	// HealthCheckRegionApNortheast1 is a HealthCheckRegion enum value
	HealthCheckRegionApNortheast1 = "ap-northeast-1"

	// HealthCheckRegionSaEast1 is a HealthCheckRegion enum value
	HealthCheckRegionSaEast1 = "sa-east-1"
)

An Amazon EC2 Region that you want Amazon Route 53 to use to perform health checks.

View Source
const (
	// HealthCheckTypeHttp is a HealthCheckType enum value
	HealthCheckTypeHttp = "HTTP"

	// HealthCheckTypeHttps is a HealthCheckType enum value
	HealthCheckTypeHttps = "HTTPS"

	// HealthCheckTypeHttpStrMatch is a HealthCheckType enum value
	HealthCheckTypeHttpStrMatch = "HTTP_STR_MATCH"

	// HealthCheckTypeHttpsStrMatch is a HealthCheckType enum value
	HealthCheckTypeHttpsStrMatch = "HTTPS_STR_MATCH"

	// HealthCheckTypeTcp is a HealthCheckType enum value
	HealthCheckTypeTcp = "TCP"

	// HealthCheckTypeCalculated is a HealthCheckType enum value
	HealthCheckTypeCalculated = "CALCULATED"

	// HealthCheckTypeCloudwatchMetric is a HealthCheckType enum value
	HealthCheckTypeCloudwatchMetric = "CLOUDWATCH_METRIC"
)
View Source
const (
	// InsufficientDataHealthStatusHealthy is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusHealthy = "Healthy"

	// InsufficientDataHealthStatusUnhealthy is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusUnhealthy = "Unhealthy"

	// InsufficientDataHealthStatusLastKnownStatus is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusLastKnownStatus = "LastKnownStatus"
)
View Source
const (
	// RRTypeSoa is a RRType enum value
	RRTypeSoa = "SOA"

	// RRTypeA is a RRType enum value
	RRTypeA = "A"

	// RRTypeTxt is a RRType enum value
	RRTypeTxt = "TXT"

	// RRTypeNs is a RRType enum value
	RRTypeNs = "NS"

	// RRTypeCname is a RRType enum value
	RRTypeCname = "CNAME"

	// RRTypeMx is a RRType enum value
	RRTypeMx = "MX"

	// RRTypeNaptr is a RRType enum value
	RRTypeNaptr = "NAPTR"

	// RRTypePtr is a RRType enum value
	RRTypePtr = "PTR"

	// RRTypeSrv is a RRType enum value
	RRTypeSrv = "SRV"

	// RRTypeSpf is a RRType enum value
	RRTypeSpf = "SPF"

	// RRTypeAaaa is a RRType enum value
	RRTypeAaaa = "AAAA"
)
View Source
const (
	// ResourceRecordSetFailoverPrimary is a ResourceRecordSetFailover enum value
	ResourceRecordSetFailoverPrimary = "PRIMARY"

	// ResourceRecordSetFailoverSecondary is a ResourceRecordSetFailover enum value
	ResourceRecordSetFailoverSecondary = "SECONDARY"
)
View Source
const (
	// ResourceRecordSetRegionUsEast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsEast1 = "us-east-1"

	// ResourceRecordSetRegionUsEast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsEast2 = "us-east-2"

	// ResourceRecordSetRegionUsWest1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsWest1 = "us-west-1"

	// ResourceRecordSetRegionUsWest2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsWest2 = "us-west-2"

	// ResourceRecordSetRegionEuWest1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionEuWest1 = "eu-west-1"

	// ResourceRecordSetRegionEuCentral1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionEuCentral1 = "eu-central-1"

	// ResourceRecordSetRegionApSoutheast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSoutheast1 = "ap-southeast-1"

	// ResourceRecordSetRegionApSoutheast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSoutheast2 = "ap-southeast-2"

	// ResourceRecordSetRegionApNortheast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApNortheast1 = "ap-northeast-1"

	// ResourceRecordSetRegionApNortheast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApNortheast2 = "ap-northeast-2"

	// ResourceRecordSetRegionSaEast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionSaEast1 = "sa-east-1"

	// ResourceRecordSetRegionCnNorth1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionCnNorth1 = "cn-north-1"

	// ResourceRecordSetRegionApSouth1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSouth1 = "ap-south-1"
)
View Source
const (
	// StatisticAverage is a Statistic enum value
	StatisticAverage = "Average"

	// StatisticSum is a Statistic enum value
	StatisticSum = "Sum"

	// StatisticSampleCount is a Statistic enum value
	StatisticSampleCount = "SampleCount"

	// StatisticMaximum is a Statistic enum value
	StatisticMaximum = "Maximum"

	// StatisticMinimum is a Statistic enum value
	StatisticMinimum = "Minimum"
)
View Source
const (
	// TagResourceTypeHealthcheck is a TagResourceType enum value
	TagResourceTypeHealthcheck = "healthcheck"

	// TagResourceTypeHostedzone is a TagResourceType enum value
	TagResourceTypeHostedzone = "hostedzone"
)
View Source
const (
	// VPCRegionUsEast1 is a VPCRegion enum value
	VPCRegionUsEast1 = "us-east-1"

	// VPCRegionUsEast2 is a VPCRegion enum value
	VPCRegionUsEast2 = "us-east-2"

	// VPCRegionUsWest1 is a VPCRegion enum value
	VPCRegionUsWest1 = "us-west-1"

	// VPCRegionUsWest2 is a VPCRegion enum value
	VPCRegionUsWest2 = "us-west-2"

	// VPCRegionEuWest1 is a VPCRegion enum value
	VPCRegionEuWest1 = "eu-west-1"

	// VPCRegionEuCentral1 is a VPCRegion enum value
	VPCRegionEuCentral1 = "eu-central-1"

	// VPCRegionApSoutheast1 is a VPCRegion enum value
	VPCRegionApSoutheast1 = "ap-southeast-1"

	// VPCRegionApSoutheast2 is a VPCRegion enum value
	VPCRegionApSoutheast2 = "ap-southeast-2"

	// VPCRegionApSouth1 is a VPCRegion enum value
	VPCRegionApSouth1 = "ap-south-1"

	// VPCRegionApNortheast1 is a VPCRegion enum value
	VPCRegionApNortheast1 = "ap-northeast-1"

	// VPCRegionApNortheast2 is a VPCRegion enum value
	VPCRegionApNortheast2 = "ap-northeast-2"

	// VPCRegionSaEast1 is a VPCRegion enum value
	VPCRegionSaEast1 = "sa-east-1"

	// VPCRegionCnNorth1 is a VPCRegion enum value
	VPCRegionCnNorth1 = "cn-north-1"
)
View Source
const ServiceName = "route53"

A ServiceName is the name of the service the client will make API calls to.

Variables

This section is empty.

Functions

This section is empty.

Types

type AlarmIdentifier added in v1.1.16

type AlarmIdentifier struct {

	// The name of the CloudWatch alarm that you want Amazon Route 53 health checkers
	// to use to determine whether this health check is healthy.
	//
	// Name is a required field
	Name *string `min:"1" type:"string" required:"true"`

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	//
	// For the current list of CloudWatch regions, see Amazon CloudWatch (http://docs.aws.amazon.com/general/latest/gr/rande.html#cw_region)
	// in AWS Regions and Endpoints in the Amazon Web Services General Reference.
	//
	// Region is a required field
	Region *string `min:"1" type:"string" required:"true" enum:"CloudWatchRegion"`
	// contains filtered or unexported fields
}

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether this health check is healthy.

func (AlarmIdentifier) GoString added in v1.1.16

func (s AlarmIdentifier) GoString() string

GoString returns the string representation

func (*AlarmIdentifier) SetName added in v1.5.0

func (s *AlarmIdentifier) SetName(v string) *AlarmIdentifier

SetName sets the Name field's value.

func (*AlarmIdentifier) SetRegion added in v1.5.0

func (s *AlarmIdentifier) SetRegion(v string) *AlarmIdentifier

SetRegion sets the Region field's value.

func (AlarmIdentifier) String added in v1.1.16

func (s AlarmIdentifier) String() string

String returns the string representation

func (*AlarmIdentifier) Validate added in v1.1.21

func (s *AlarmIdentifier) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AliasTarget

type AliasTarget struct {

	// Alias resource record sets only: The value that you specify depends on where
	// you want to route queries:
	//
	//    * A CloudFront distribution: Specify the domain name that CloudFront assigned
	//    when you created your distribution.
	//
	// Your CloudFront distribution must include an alternate domain name that matches
	//    the name of the resource record set. For example, if the name of the resource
	//    record set is acme.example.com, your CloudFront distribution must include
	//    acme.example.com as one of the alternate domain names. For more information,
	//    see Using Alternate Domain Names (CNAMEs) (http://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html)
	//    in the Amazon CloudFront Developer Guide.
	//
	//    * Elastic Beanstalk environment: Specify the CNAME attribute for the environment.
	//    (The environment must have a regionalized domain name.) You can use the
	//    following methods to get the value of the CNAME attribute:
	//
	// AWS Managment Console: For information about how to get the value by using
	//    the console, see Using Custom Domains with AWS Elastic Beanstalk (http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html)
	//    in the AWS Elastic Beanstalk Developer Guide.
	//
	// Elastic Load Balancing API: Use the DescribeEnvironments action to get the
	//    value of the CNAME attribute. For more information, see DescribeEnvironments
	//    (http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/API_DescribeEnvironments.html)
	//    in the AWS Elastic Beanstalk API Reference.
	//
	// AWS CLI: Use the describe-environments command to get the value of the CNAME
	//    attribute. For more information, see describe-environments (http://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html)
	//    in the AWS Command Line Interface Reference.
	//
	//    * An ELB load balancer: Specify the DNS name associated with the load
	//    balancer. Get the DNS name by using the AWS Management Console, the ELB
	//    API, or the AWS CLI. Use the same method to get values for HostedZoneId
	//    and DNSName. If you get one value from the console and the other value
	//    from the API or the CLI, creating the resource record set will fail.
	//
	// AWS Management Console: Go to the EC2 page, click Load Balancers in the navigation
	//    pane, choose the load balancer, choose the Description tab, and get the
	//    value of the DNS Name field that begins with dualstack. Use the same process
	//    to get the Hosted Zone ID. See HostedZone$Id.
	//
	// Elastic Load Balancing API: Use DescribeLoadBalancers (http://docs.aws.amazon.com/ElasticLoadBalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//    to get the value of CanonicalHostedZoneName. Use the same process to get
	//    the CanonicalHostedZoneNameId. See HostedZone$Id.
	//
	// AWS CLI: Use describe-load-balancers (http://docs.aws.amazon.com/ElasticLoadBalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//    to get the value of CanonicalHostedZoneName. Use the same process to get
	//    the CanonicalHostedZoneNameId. See HostedZoneId.
	//
	//    * An Amazon S3 bucket that is configured as a static website: Specify
	//    the domain name of the Amazon S3 website endpoint in which you created
	//    the bucket; for example, s3-website-us-east-1.amazonaws.com. For more
	//    information about valid values, see the table Amazon Simple Storage Service
	//    (S3) Website Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region)
	//    in the Amazon Web Services General Reference. For more information about
	//    using S3 buckets for websites, see Hosting a Static Website on Amazon
	//    S3 (http://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html)
	//    in the Amazon S3 Developer Guide.
	//
	//    * Another Amazon Route 53 resource record set: Specify the value of the
	//    Name element for a resource record set in the current hosted zone.
	//
	// DNSName is a required field
	DNSName *string `type:"string" required:"true"`

	// Applies only to alias, weighted alias, latency alias, and failover alias
	// record sets: If you set the value of EvaluateTargetHealth to true for the
	// resource record set or sets in an alias, weighted alias, latency alias, or
	// failover alias resource record set, and if you specify a value for HealthCheck$Id
	// for every resource record set that is referenced by these alias resource
	// record sets, the alias resource record sets inherit the health of the referenced
	// resource record sets.
	//
	// In this configuration, when Amazon Route 53 receives a DNS query for an alias
	// resource record set:
	//
	//    * Amazon Route 53 looks at the resource record sets that are referenced
	//    by the alias resource record sets to determine which health checks they're
	//    using.
	//
	//    * Amazon Route 53 checks the current status of each health check. (Amazon
	//    Route 53 periodically checks the health of the endpoint that is specified
	//    in a health check; it doesn't perform the health check when the DNS query
	//    arrives.)
	//
	//    * Based on the status of the health checks, Amazon Route 53 determines
	//    which resource record sets are healthy. Unhealthy resource record sets
	//    are immediately removed from consideration. In addition, if all of the
	//    resource record sets that are referenced by an alias resource record set
	//    are unhealthy, that alias resource record set also is immediately removed
	//    from consideration.
	//
	//    * Based on the configuration of the alias resource record sets (weighted
	//    alias or latency alias, for example) and the configuration of the resource
	//    record sets that they reference, Amazon Route 53 chooses a resource record
	//    set from the healthy resource record sets, and responds to the query.
	//
	// Note the following:
	//
	//    * You can't set EvaluateTargetHealth to true when the alias target is
	//    a CloudFront distribution.
	//
	//    * If the AWS resource that you specify in AliasTarget is a resource record
	//    set or a group of resource record sets (for example, a group of weighted
	//    resource record sets), but it is not another alias resource record set,
	//    we recommend that you associate a health check with all of the resource
	//    record sets in the alias target.For more information, see What Happens
	//    When You Omit Health Checks? (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting)
	//    in the Amazon Route 53 Developer Guide.
	//
	//    * If you specify an Elastic Beanstalk environment in HostedZoneId and
	//    DNSName, and if the environment contains an ELB load balancer, Elastic
	//    Load Balancing routes queries only to the healthy Amazon EC2 instances
	//    that are registered with the load balancer. (An environment automatically
	//    contains an ELB load balancer if it includes more than one EC2 instance.)
	//    If you set EvaluateTargetHealth to true and either no EC2 instances are
	//    healthy or the load balancer itself is unhealthy, Amazon Route 53 routes
	//    queries to other available resources that are healthy, if any.
	//
	// If the environment contains a single EC2 instance, there are no special requirements.
	//
	//    * If you specify an ELB load balancer in AliasTarget, Elastic Load Balancing
	//    routes queries only to the healthy EC2 instances that are registered with
	//    the load balancer. If no EC2 instances are healthy or if the load balancer
	//    itself is unhealthy, and if EvaluateTargetHealth is true for the corresponding
	//    alias resource record set, Amazon Route 53 routes queries to other resources.
	//    When you create a load balancer, you configure settings for Elastic Load
	//    Balancing health checks; they're not Amazon Route 53 health checks, but
	//    they perform a similar function. Do not create Amazon Route 53 health
	//    checks for the EC2 instances that you register with an ELB load balancer.
	//
	// For more information, see How Health Checks Work in More Complex Amazon Route
	//    53 Configurations (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html)
	//    in the Amazon Route 53 Developers Guide.
	//
	//    * We recommend that you set EvaluateTargetHealth to true only when you
	//    have enough idle capacity to handle the failure of one or more endpoints.
	//
	// For more information and examples, see Amazon Route 53 Health Checks and
	// DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// EvaluateTargetHealth is a required field
	EvaluateTargetHealth *bool `type:"boolean" required:"true"`

	// Alias resource records sets only: The value used depends on where the queries
	// are routed:
	//
	// A CloudFront distributionSpecify Z2FDTNDATAQYW2.
	//
	// Alias resource record sets for CloudFront can't be created in a private zone.
	//
	// Elastic Beanstalk environmentSpecify the hosted zone ID for the region in
	// which you created the environment. The environment must have a regionalized
	// subdomain. For a list of regions and the corresponding hosted zone IDs, see
	// AWS Elastic Beanstalk (http://docs.aws.amazon.com/general/latest/gr/rande.html#elasticbeanstalk_region)
	// in the Regions and Endpoints chapter of the Amazon Web Services General Reference.
	//
	// ELB load balancerSpecify the value of the hosted zone ID for the load balancer.
	// Use the following methods to get the hosted zone ID:
	//
	// AWS Management Console: Go to the Amazon EC2 page, click Load Balancers in
	// the navigation pane, select the load balancer, and get the value of the Hosted
	// Zone ID field on the Description tab. Use the same process to get the value
	// of DNS Name. See HostedZone$Name.
	//
	// Elastic Load Balancing API: Use DescribeLoadBalancers to get the value of
	// CanonicalHostedZoneNameID. Use the same process to get the CanonicalHostedZoneName.
	// See HostedZone$Name.
	//
	// AWS CLI: Use describe-load-balancers (http://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	// to get the value of CanonicalHostedZoneNameID. Use the same process to get
	// the CanonicalHostedZoneName. See HostedZone$Name.
	//
	// An Amazon S3 bucket configured as a static websiteSpecify the hosted zone
	// ID for the Amazon S3 website endpoint in which you created the bucket. For
	// more information about valid values, see the table  Amazon S3 (S3) Website
	// Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region)
	// in the Amazon Web Services General Reference.
	//
	// Another Amazon Route 53 resource record set in your hosted zoneSpecify the
	// hosted zone ID of your hosted zone. (An alias resource record set can't reference
	// a resource record set in a different hosted zone.)
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Alias resource record sets only: Information about the CloudFront distribution, Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or Amazon Route 53 resource record set that you're redirecting queries to. The Elastic Beanstalk environment must have a regionalized subdomain.

When creating resource record sets for a private hosted zone, note the following:

func (AliasTarget) GoString added in v0.6.5

func (s AliasTarget) GoString() string

GoString returns the string representation

func (*AliasTarget) SetDNSName added in v1.5.0

func (s *AliasTarget) SetDNSName(v string) *AliasTarget

SetDNSName sets the DNSName field's value.

func (*AliasTarget) SetEvaluateTargetHealth added in v1.5.0

func (s *AliasTarget) SetEvaluateTargetHealth(v bool) *AliasTarget

SetEvaluateTargetHealth sets the EvaluateTargetHealth field's value.

func (*AliasTarget) SetHostedZoneId added in v1.5.0

func (s *AliasTarget) SetHostedZoneId(v string) *AliasTarget

SetHostedZoneId sets the HostedZoneId field's value.

func (AliasTarget) String added in v0.6.5

func (s AliasTarget) String() string

String returns the string representation

func (*AliasTarget) Validate added in v1.1.21

func (s *AliasTarget) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneInput

type AssociateVPCWithHostedZoneInput struct {

	// Optional: A comment about the association request.
	Comment *string `type:"string"`

	// The ID of the private hosted zone that you want to associate an Amazon VPC
	// with.
	//
	// Note that you can't associate a VPC with a hosted zone that doesn't have
	// an existing VPC association.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains information about the VPC that you want to associate
	// with a private hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to associate a VPC with a private hosted zone.

func (AssociateVPCWithHostedZoneInput) GoString added in v0.6.5

GoString returns the string representation

func (*AssociateVPCWithHostedZoneInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*AssociateVPCWithHostedZoneInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*AssociateVPCWithHostedZoneInput) SetVPC added in v1.5.0

SetVPC sets the VPC field's value.

func (AssociateVPCWithHostedZoneInput) String added in v0.6.5

String returns the string representation

func (*AssociateVPCWithHostedZoneInput) Validate added in v1.1.21

func (s *AssociateVPCWithHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneOutput

type AssociateVPCWithHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the AssociateVPCWithHostedZone request.

func (AssociateVPCWithHostedZoneOutput) GoString added in v0.6.5

GoString returns the string representation

func (*AssociateVPCWithHostedZoneOutput) SetChangeInfo added in v1.5.0

SetChangeInfo sets the ChangeInfo field's value.

func (AssociateVPCWithHostedZoneOutput) String added in v0.6.5

String returns the string representation

type Change

type Change struct {

	// The action to perform:
	//
	//    * CREATE: Creates a resource record set that has the specified values.
	//
	//    * DELETE: Deletes a existing resource record set.
	//
	// To delete the resource record set that is associated with a traffic policy
	//    instance, use DeleteTrafficPolicyInstance. Amazon Route 53 will delete
	//    the resource record set automatically. If you delete the resource record
	//    set by using ChangeResourceRecordSets, Amazon Route 53 doesn't automatically
	//    delete the traffic policy instance, and you'll continue to be charged
	//    for it even though it's no longer in use.
	//
	//    * UPSERT: If a resource record set doesn't already exist, Amazon Route
	//    53 creates it. If a resource record set does exist, Amazon Route 53 updates
	//    it with the values in the request.
	//
	// The values that you need to include in the request depend on the type of
	// resource record set that you're creating, deleting, or updating:
	//
	// Basic resource record sets (excluding alias, failover, geolocation, latency,
	// and weighted resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * TTL
	//
	// Failover, geolocation, latency, or weighted resource record sets (excluding
	// alias resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * TTL
	//
	//    * SetIdentifier
	//
	// Alias resource record sets (including failover alias, geolocation alias,
	// latency alias, and weighted alias resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * AliasTarget (includes DNSName, EvaluateTargetHealth, and HostedZoneId)
	//
	//    * SetIdentifier (for failover, geolocation, latency, and weighted resource
	//    record sets)
	//
	// Action is a required field
	Action *string `type:"string" required:"true" enum:"ChangeAction"`

	// Information about the resource record set to create, delete, or update.
	//
	// ResourceRecordSet is a required field
	ResourceRecordSet *ResourceRecordSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

The information for each resource record set that you want to change.

func (Change) GoString added in v0.6.5

func (s Change) GoString() string

GoString returns the string representation

func (*Change) SetAction added in v1.5.0

func (s *Change) SetAction(v string) *Change

SetAction sets the Action field's value.

func (*Change) SetResourceRecordSet added in v1.5.0

func (s *Change) SetResourceRecordSet(v *ResourceRecordSet) *Change

SetResourceRecordSet sets the ResourceRecordSet field's value.

func (Change) String added in v0.6.5

func (s Change) String() string

String returns the string representation

func (*Change) Validate added in v1.1.21

func (s *Change) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeBatch

type ChangeBatch struct {

	// Information about the changes to make to the record sets.
	//
	// Changes is a required field
	Changes []*Change `locationNameList:"Change" min:"1" type:"list" required:"true"`

	// Optional: Any comments you want to include about a change batch request.
	Comment *string `type:"string"`
	// contains filtered or unexported fields
}

The information for a change request.

func (ChangeBatch) GoString added in v0.6.5

func (s ChangeBatch) GoString() string

GoString returns the string representation

func (*ChangeBatch) SetChanges added in v1.5.0

func (s *ChangeBatch) SetChanges(v []*Change) *ChangeBatch

SetChanges sets the Changes field's value.

func (*ChangeBatch) SetComment added in v1.5.0

func (s *ChangeBatch) SetComment(v string) *ChangeBatch

SetComment sets the Comment field's value.

func (ChangeBatch) String added in v0.6.5

func (s ChangeBatch) String() string

String returns the string representation

func (*ChangeBatch) Validate added in v1.1.21

func (s *ChangeBatch) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeInfo

type ChangeInfo struct {

	// A complex type that describes change information about changes made to your
	// hosted zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	Comment *string `type:"string"`

	// The ID of the request.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The current state of the request. PENDING indicates that this request has
	// not yet been applied to all Amazon Route 53 DNS servers.
	//
	// Status is a required field
	Status *string `type:"string" required:"true" enum:"ChangeStatus"`

	// The date and time the change request was submitted, in Coordinated Universal
	// Time (UTC) format: YYYY-MM-DDThh:mm:ssZ. For more information, see the Wikipedia
	// entry ISO 8601 (https://en.wikipedia.org/wiki/ISO_8601).
	//
	// SubmittedAt is a required field
	SubmittedAt *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

A complex type that describes change information about changes made to your hosted zone.

func (ChangeInfo) GoString added in v0.6.5

func (s ChangeInfo) GoString() string

GoString returns the string representation

func (*ChangeInfo) SetComment added in v1.5.0

func (s *ChangeInfo) SetComment(v string) *ChangeInfo

SetComment sets the Comment field's value.

func (*ChangeInfo) SetId added in v1.5.0

func (s *ChangeInfo) SetId(v string) *ChangeInfo

SetId sets the Id field's value.

func (*ChangeInfo) SetStatus added in v1.5.0

func (s *ChangeInfo) SetStatus(v string) *ChangeInfo

SetStatus sets the Status field's value.

func (*ChangeInfo) SetSubmittedAt added in v1.5.0

func (s *ChangeInfo) SetSubmittedAt(v time.Time) *ChangeInfo

SetSubmittedAt sets the SubmittedAt field's value.

func (ChangeInfo) String added in v0.6.5

func (s ChangeInfo) String() string

String returns the string representation

type ChangeResourceRecordSetsInput

type ChangeResourceRecordSetsInput struct {

	// A complex type that contains an optional comment and the Changes element.
	//
	// ChangeBatch is a required field
	ChangeBatch *ChangeBatch `type:"structure" required:"true"`

	// The ID of the hosted zone that contains the resource record sets that you
	// want to change.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains change information for the resource record set.

func (ChangeResourceRecordSetsInput) GoString added in v0.6.5

GoString returns the string representation

func (*ChangeResourceRecordSetsInput) SetChangeBatch added in v1.5.0

SetChangeBatch sets the ChangeBatch field's value.

func (*ChangeResourceRecordSetsInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (ChangeResourceRecordSetsInput) String added in v0.6.5

String returns the string representation

func (*ChangeResourceRecordSetsInput) Validate added in v1.1.21

func (s *ChangeResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeResourceRecordSetsOutput

type ChangeResourceRecordSetsOutput struct {

	// A complex type that contains information about changes made to your hosted
	// zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response for the request.

func (ChangeResourceRecordSetsOutput) GoString added in v0.6.5

GoString returns the string representation

func (*ChangeResourceRecordSetsOutput) SetChangeInfo added in v1.5.0

SetChangeInfo sets the ChangeInfo field's value.

func (ChangeResourceRecordSetsOutput) String added in v0.6.5

String returns the string representation

type ChangeTagsForResourceInput

type ChangeTagsForResourceInput struct {

	// A complex type that contains a list of the tags that you want to add to the
	// specified health check or hosted zone and/or the tags for which you want
	// to edit the Value element.
	//
	// You can add a maximum of 10 tags to a health check or a hosted zone.
	AddTags []*Tag `locationNameList:"Tag" min:"1" type:"list"`

	// A complex type that contains a list of the tags that you want to delete from
	// the specified health check or hosted zone. You can specify up to 10 keys.
	RemoveTagKeys []*string `locationNameList:"Key" min:"1" type:"list"`

	// The ID of the resource for which you want to add, change, or delete tags.
	//
	// ResourceId is a required field
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the tags that you want to add, edit, or delete.

func (ChangeTagsForResourceInput) GoString added in v0.6.5

func (s ChangeTagsForResourceInput) GoString() string

GoString returns the string representation

func (*ChangeTagsForResourceInput) SetAddTags added in v1.5.0

SetAddTags sets the AddTags field's value.

func (*ChangeTagsForResourceInput) SetRemoveTagKeys added in v1.5.0

SetRemoveTagKeys sets the RemoveTagKeys field's value.

func (*ChangeTagsForResourceInput) SetResourceId added in v1.5.0

SetResourceId sets the ResourceId field's value.

func (*ChangeTagsForResourceInput) SetResourceType added in v1.5.0

SetResourceType sets the ResourceType field's value.

func (ChangeTagsForResourceInput) String added in v0.6.5

String returns the string representation

func (*ChangeTagsForResourceInput) Validate added in v1.1.21

func (s *ChangeTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeTagsForResourceOutput

type ChangeTagsForResourceOutput struct {
	// contains filtered or unexported fields
}

Empty response for the request.

func (ChangeTagsForResourceOutput) GoString added in v0.6.5

func (s ChangeTagsForResourceOutput) GoString() string

GoString returns the string representation

func (ChangeTagsForResourceOutput) String added in v0.6.5

String returns the string representation

type CloudWatchAlarmConfiguration added in v1.1.16

type CloudWatchAlarmConfiguration struct {

	// For the metric that the CloudWatch alarm is associated with, the arithmetic
	// operation that is used for the comparison.
	//
	// ComparisonOperator is a required field
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`

	// For the metric that the CloudWatch alarm is associated with, a complex type
	// that contains information about the dimensions for the metric.For information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference ( http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch User Guide.
	Dimensions []*Dimension `locationNameList:"Dimension" type:"list"`

	// For the metric that the CloudWatch alarm is associated with, the number of
	// periods that the metric is compared to the threshold.
	//
	// EvaluationPeriods is a required field
	EvaluationPeriods *int64 `min:"1" type:"integer" required:"true"`

	// The name of the CloudWatch metric that the alarm is associated with.
	//
	// MetricName is a required field
	MetricName *string `min:"1" type:"string" required:"true"`

	// The namespace of the metric that the alarm is associated with. For more information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch User Guide.
	//
	// Namespace is a required field
	Namespace *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the duration
	// of one evaluation period in seconds.
	//
	// Period is a required field
	Period *int64 `min:"60" type:"integer" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the statistic
	// that is applied to the metric.
	//
	// Statistic is a required field
	Statistic *string `type:"string" required:"true" enum:"Statistic"`

	// For the metric that the CloudWatch alarm is associated with, the value the
	// metric is compared with.
	//
	// Threshold is a required field
	Threshold *float64 `type:"double" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the CloudWatch alarm that Amazon Route 53 is monitoring for this health check.

func (CloudWatchAlarmConfiguration) GoString added in v1.1.16

func (s CloudWatchAlarmConfiguration) GoString() string

GoString returns the string representation

func (*CloudWatchAlarmConfiguration) SetComparisonOperator added in v1.5.0

SetComparisonOperator sets the ComparisonOperator field's value.

func (*CloudWatchAlarmConfiguration) SetDimensions added in v1.5.0

SetDimensions sets the Dimensions field's value.

func (*CloudWatchAlarmConfiguration) SetEvaluationPeriods added in v1.5.0

SetEvaluationPeriods sets the EvaluationPeriods field's value.

func (*CloudWatchAlarmConfiguration) SetMetricName added in v1.5.0

SetMetricName sets the MetricName field's value.

func (*CloudWatchAlarmConfiguration) SetNamespace added in v1.5.0

SetNamespace sets the Namespace field's value.

func (*CloudWatchAlarmConfiguration) SetPeriod added in v1.5.0

SetPeriod sets the Period field's value.

func (*CloudWatchAlarmConfiguration) SetStatistic added in v1.5.0

SetStatistic sets the Statistic field's value.

func (*CloudWatchAlarmConfiguration) SetThreshold added in v1.5.0

SetThreshold sets the Threshold field's value.

func (CloudWatchAlarmConfiguration) String added in v1.1.16

String returns the string representation

type CreateHealthCheckInput

type CreateHealthCheckInput struct {

	// A unique string that identifies the request and that allows failed CreateHealthCheck
	// requests to be retried without the risk of executing the operation twice.
	// You must use a unique CallerReference string every time you create a health
	// check.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains the response to a CreateHealthCheck request.
	//
	// HealthCheckConfig is a required field
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the health check request information.

func (CreateHealthCheckInput) GoString added in v0.6.5

func (s CreateHealthCheckInput) GoString() string

GoString returns the string representation

func (*CreateHealthCheckInput) SetCallerReference added in v1.5.0

func (s *CreateHealthCheckInput) SetCallerReference(v string) *CreateHealthCheckInput

SetCallerReference sets the CallerReference field's value.

func (*CreateHealthCheckInput) SetHealthCheckConfig added in v1.5.0

SetHealthCheckConfig sets the HealthCheckConfig field's value.

func (CreateHealthCheckInput) String added in v0.6.5

func (s CreateHealthCheckInput) String() string

String returns the string representation

func (*CreateHealthCheckInput) Validate added in v1.1.21

func (s *CreateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHealthCheckOutput

type CreateHealthCheckOutput struct {

	// A complex type that contains identifying information about the health check.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`

	// The unique URL representing the new health check.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the new health check.

func (CreateHealthCheckOutput) GoString added in v0.6.5

func (s CreateHealthCheckOutput) GoString() string

GoString returns the string representation

func (*CreateHealthCheckOutput) SetHealthCheck added in v1.5.0

SetHealthCheck sets the HealthCheck field's value.

func (*CreateHealthCheckOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (CreateHealthCheckOutput) String added in v0.6.5

func (s CreateHealthCheckOutput) String() string

String returns the string representation

type CreateHostedZoneInput

type CreateHostedZoneInput struct {

	// A unique string that identifies the request and that allows failed CreateHostedZone
	// requests to be retried without the risk of executing the operation twice.
	// You must use a unique CallerReference string every time you create a hosted
	// zone. CallerReference can be any unique string, for example, a date/time
	// stamp.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to associate a reusable delegation set with this hosted zone,
	// the ID that Amazon Route 53 assigned to the reusable delegation set when
	// you created it. For more information about reusable delegation sets, see
	// CreateReusableDelegationSet.
	//
	// TypeString
	//
	// DefaultNone
	//
	// ParentCreatedHostedZoneRequest
	DelegationSetId *string `type:"string"`

	// (Optional) A complex type that contains an optional comment about your hosted
	// zone. If you don't want to specify a comment, omit both the HostedZoneConfig
	// and Comment elements.
	HostedZoneConfig *HostedZoneConfig `type:"structure"`

	// The name of the domain. For resource record types that include a domain name,
	// specify a fully qualified domain name, for example, www.example.com. The
	// trailing dot is optional; Amazon Route 53 assumes that the domain name is
	// fully qualified. This means that Amazon Route 53 treats www.example.com (without
	// a trailing dot) and www.example.com. (with a trailing dot) as identical.
	//
	// If you're creating a public hosted zone, this is the name you have registered
	// with your DNS registrar. If your domain name is registered with a registrar
	// other than Amazon Route 53, change the name servers for your domain to the
	// set of NameServers that CreateHostedZone returns in the DelegationSet element.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The VPC that you want your hosted zone to be associated with. By providing
	// this parameter, your newly created hosted can't be resolved anywhere other
	// than the given VPC.
	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type containing the hosted zone request information.

func (CreateHostedZoneInput) GoString added in v0.6.5

func (s CreateHostedZoneInput) GoString() string

GoString returns the string representation

func (*CreateHostedZoneInput) SetCallerReference added in v1.5.0

func (s *CreateHostedZoneInput) SetCallerReference(v string) *CreateHostedZoneInput

SetCallerReference sets the CallerReference field's value.

func (*CreateHostedZoneInput) SetDelegationSetId added in v1.5.0

func (s *CreateHostedZoneInput) SetDelegationSetId(v string) *CreateHostedZoneInput

SetDelegationSetId sets the DelegationSetId field's value.

func (*CreateHostedZoneInput) SetHostedZoneConfig added in v1.5.0

func (s *CreateHostedZoneInput) SetHostedZoneConfig(v *HostedZoneConfig) *CreateHostedZoneInput

SetHostedZoneConfig sets the HostedZoneConfig field's value.

func (*CreateHostedZoneInput) SetName added in v1.5.0

SetName sets the Name field's value.

func (*CreateHostedZoneInput) SetVPC added in v1.5.0

SetVPC sets the VPC field's value.

func (CreateHostedZoneInput) String added in v0.6.5

func (s CreateHostedZoneInput) String() string

String returns the string representation

func (*CreateHostedZoneInput) Validate added in v1.1.21

func (s *CreateHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHostedZoneOutput

type CreateHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`

	// A complex type that describes the name servers for this hosted zone.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`

	// The unique URL representing the new hosted zone.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains information about an Amazon VPC that you associated
	// with this hosted zone.
	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the hosted zone.

func (CreateHostedZoneOutput) GoString added in v0.6.5

func (s CreateHostedZoneOutput) GoString() string

GoString returns the string representation

func (*CreateHostedZoneOutput) SetChangeInfo added in v1.5.0

SetChangeInfo sets the ChangeInfo field's value.

func (*CreateHostedZoneOutput) SetDelegationSet added in v1.5.0

SetDelegationSet sets the DelegationSet field's value.

func (*CreateHostedZoneOutput) SetHostedZone added in v1.5.0

SetHostedZone sets the HostedZone field's value.

func (*CreateHostedZoneOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (*CreateHostedZoneOutput) SetVPC added in v1.5.0

SetVPC sets the VPC field's value.

func (CreateHostedZoneOutput) String added in v0.6.5

func (s CreateHostedZoneOutput) String() string

String returns the string representation

type CreateReusableDelegationSetInput

type CreateReusableDelegationSetInput struct {

	// A unique string that identifies the request, and that allows you to retry
	// failed CreateReusableDelegationSet requests without the risk of executing
	// the operation twice. You must use a unique CallerReference string every time
	// you submit a CreateReusableDelegationSet request. CallerReference can be
	// any unique string, for example a date/time stamp.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to mark the delegation set for an existing hosted zone as reusable,
	// the ID for that hosted zone.
	HostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

func (CreateReusableDelegationSetInput) GoString added in v0.6.5

GoString returns the string representation

func (*CreateReusableDelegationSetInput) SetCallerReference added in v1.5.0

SetCallerReference sets the CallerReference field's value.

func (*CreateReusableDelegationSetInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (CreateReusableDelegationSetInput) String added in v0.6.5

String returns the string representation

func (*CreateReusableDelegationSetInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type CreateReusableDelegationSetOutput

type CreateReusableDelegationSetOutput struct {

	// A complex type that contains name server information.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// The unique URL representing the new reusable delegation set.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (CreateReusableDelegationSetOutput) GoString added in v0.6.5

GoString returns the string representation

func (*CreateReusableDelegationSetOutput) SetDelegationSet added in v1.5.0

SetDelegationSet sets the DelegationSet field's value.

func (*CreateReusableDelegationSetOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (CreateReusableDelegationSetOutput) String added in v0.6.5

String returns the string representation

type CreateTrafficPolicyInput added in v1.0.3

type CreateTrafficPolicyInput struct {

	// (Optional) Any comments that you want to include about the traffic policy.
	Comment *string `type:"string"`

	// The definition of this traffic policy in JSON format. For more information,
	// see Traffic Policy Document Format (http://docs.aws.amazon.com/Route53/latest/APIReference/api-policies-traffic-policy-document-format.html).
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The name of the traffic policy.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy that you want to create.

func (CreateTrafficPolicyInput) GoString added in v1.0.3

func (s CreateTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*CreateTrafficPolicyInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*CreateTrafficPolicyInput) SetDocument added in v1.5.0

SetDocument sets the Document field's value.

func (*CreateTrafficPolicyInput) SetName added in v1.5.0

SetName sets the Name field's value.

func (CreateTrafficPolicyInput) String added in v1.0.3

func (s CreateTrafficPolicyInput) String() string

String returns the string representation

func (*CreateTrafficPolicyInput) Validate added in v1.1.21

func (s *CreateTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceInput added in v1.0.3

type CreateTrafficPolicyInstanceInput struct {

	// The ID of the hosted zone in which you want Amazon Route 53 to create resource
	// record sets by using the configuration in a traffic policy.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The domain name (such as example.com) or subdomain name (such as www.example.com)
	// for which Amazon Route 53 responds to DNS queries by using the resource record
	// sets that Amazon Route 53 creates for this traffic policy instance.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// (Optional) The TTL that you want Amazon Route 53 to assign to all of the
	// resource record sets that it creates in the specified hosted zone.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want to use to create resource record
	// sets in the specified hosted zone.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `type:"string" required:"true"`

	// The version of the traffic policy that you want to use to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to create based on a specified traffic policy.

func (CreateTrafficPolicyInstanceInput) GoString added in v1.0.3

GoString returns the string representation

func (*CreateTrafficPolicyInstanceInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateTrafficPolicyInstanceInput) SetName added in v1.5.0

SetName sets the Name field's value.

func (*CreateTrafficPolicyInstanceInput) SetTTL added in v1.5.0

SetTTL sets the TTL field's value.

func (*CreateTrafficPolicyInstanceInput) SetTrafficPolicyId added in v1.5.0

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*CreateTrafficPolicyInstanceInput) SetTrafficPolicyVersion added in v1.5.0

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (CreateTrafficPolicyInstanceInput) String added in v1.0.3

String returns the string representation

func (*CreateTrafficPolicyInstanceInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceOutput added in v1.0.3

type CreateTrafficPolicyInstanceOutput struct {

	// A unique URL that represents a new traffic policy instance.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyInstance request.

func (CreateTrafficPolicyInstanceOutput) GoString added in v1.0.3

GoString returns the string representation

func (*CreateTrafficPolicyInstanceOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyInstanceOutput) SetTrafficPolicyInstance added in v1.5.0

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (CreateTrafficPolicyInstanceOutput) String added in v1.0.3

String returns the string representation

type CreateTrafficPolicyOutput added in v1.0.3

type CreateTrafficPolicyOutput struct {

	// A unique URL that represents a new traffic policy.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicy request.

func (CreateTrafficPolicyOutput) GoString added in v1.0.3

func (s CreateTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (*CreateTrafficPolicyOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyOutput) SetTrafficPolicy added in v1.5.0

SetTrafficPolicy sets the TrafficPolicy field's value.

func (CreateTrafficPolicyOutput) String added in v1.0.3

func (s CreateTrafficPolicyOutput) String() string

String returns the string representation

type CreateTrafficPolicyVersionInput added in v1.0.3

type CreateTrafficPolicyVersionInput struct {

	// The comment that you specified in the CreateTrafficPolicyVersion request,
	// if any.
	Comment *string `type:"string"`

	// The definition of this version of the traffic policy, in JSON format. You
	// specified the JSON in the CreateTrafficPolicyVersion request. For more information
	// about the JSON format, see CreateTrafficPolicy.
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The ID of the traffic policy for which you want to create a new version.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy for which you want to create a new version.

func (CreateTrafficPolicyVersionInput) GoString added in v1.0.3

GoString returns the string representation

func (*CreateTrafficPolicyVersionInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*CreateTrafficPolicyVersionInput) SetDocument added in v1.5.0

SetDocument sets the Document field's value.

func (*CreateTrafficPolicyVersionInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (CreateTrafficPolicyVersionInput) String added in v1.0.3

String returns the string representation

func (*CreateTrafficPolicyVersionInput) Validate added in v1.1.21

func (s *CreateTrafficPolicyVersionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyVersionOutput added in v1.0.3

type CreateTrafficPolicyVersionOutput struct {

	// A unique URL that represents a new traffic policy version.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new version of the traffic
	// policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyVersion request.

func (CreateTrafficPolicyVersionOutput) GoString added in v1.0.3

GoString returns the string representation

func (*CreateTrafficPolicyVersionOutput) SetLocation added in v1.5.0

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyVersionOutput) SetTrafficPolicy added in v1.5.0

SetTrafficPolicy sets the TrafficPolicy field's value.

func (CreateTrafficPolicyVersionOutput) String added in v1.0.3

String returns the string representation

type CreateVPCAssociationAuthorizationInput added in v1.5.6

type CreateVPCAssociationAuthorizationInput struct {

	// The ID of the private hosted zone that you want to authorize associating
	// a VPC with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains the VPC ID and region for the VPC that you want
	// to authorize associating with your hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to authorize associating a VPC with your private hosted zone. Authorization is only required when a private hosted zone and a VPC were created by using different accounts.

func (CreateVPCAssociationAuthorizationInput) GoString added in v1.5.6

GoString returns the string representation

func (*CreateVPCAssociationAuthorizationInput) SetHostedZoneId added in v1.5.6

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateVPCAssociationAuthorizationInput) SetVPC added in v1.5.6

SetVPC sets the VPC field's value.

func (CreateVPCAssociationAuthorizationInput) String added in v1.5.6

String returns the string representation

func (*CreateVPCAssociationAuthorizationInput) Validate added in v1.5.6

Validate inspects the fields of the type to determine if they are valid.

type CreateVPCAssociationAuthorizationOutput added in v1.5.6

type CreateVPCAssociationAuthorizationOutput struct {

	// The ID of the hosted zone that you authorized associating a VPC with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The VPC that you authorized associating with a hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information from a CreateVPCAssociationAuthorization request.

func (CreateVPCAssociationAuthorizationOutput) GoString added in v1.5.6

GoString returns the string representation

func (*CreateVPCAssociationAuthorizationOutput) SetHostedZoneId added in v1.5.6

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateVPCAssociationAuthorizationOutput) SetVPC added in v1.5.6

SetVPC sets the VPC field's value.

func (CreateVPCAssociationAuthorizationOutput) String added in v1.5.6

String returns the string representation

type DelegationSet

type DelegationSet struct {

	// A unique string that identifies the request, and that allows you to retry
	// failed CreateReusableDelegationSet requests without the risk of executing
	// the operation twice. You must use a unique CallerReference string every time
	// you submit a CreateReusableDelegationSet request. CallerReference can be
	// any unique string, for example, a date/time stamp.
	CallerReference *string `min:"1" type:"string"`

	// The ID that Amazon Route 53 assigns to a reusable delegation set.
	Id *string `type:"string"`

	// A complex type that contains a list of the authoritative name servers for
	// the hosted zone.
	//
	// NameServers is a required field
	NameServers []*string `locationNameList:"NameServer" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that describes the name servers for this hosted zone.

func (DelegationSet) GoString added in v0.6.5

func (s DelegationSet) GoString() string

GoString returns the string representation

func (*DelegationSet) SetCallerReference added in v1.5.0

func (s *DelegationSet) SetCallerReference(v string) *DelegationSet

SetCallerReference sets the CallerReference field's value.

func (*DelegationSet) SetId added in v1.5.0

func (s *DelegationSet) SetId(v string) *DelegationSet

SetId sets the Id field's value.

func (*DelegationSet) SetNameServers added in v1.5.0

func (s *DelegationSet) SetNameServers(v []*string) *DelegationSet

SetNameServers sets the NameServers field's value.

func (DelegationSet) String added in v0.6.5

func (s DelegationSet) String() string

String returns the string representation

type DeleteHealthCheckInput

type DeleteHealthCheckInput struct {

	// The ID of the health check that you want to delete.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action deletes a health check. Send a DELETE request to the /2013-04-01/DeleteHealthCheckRequest resource.

func (DeleteHealthCheckInput) GoString added in v0.6.5

func (s DeleteHealthCheckInput) GoString() string

GoString returns the string representation

func (*DeleteHealthCheckInput) SetHealthCheckId added in v1.5.0

func (s *DeleteHealthCheckInput) SetHealthCheckId(v string) *DeleteHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (DeleteHealthCheckInput) String added in v0.6.5

func (s DeleteHealthCheckInput) String() string

String returns the string representation

func (*DeleteHealthCheckInput) Validate added in v1.1.21

func (s *DeleteHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHealthCheckOutput

type DeleteHealthCheckOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteHealthCheckOutput) GoString added in v0.6.5

func (s DeleteHealthCheckOutput) GoString() string

GoString returns the string representation

func (DeleteHealthCheckOutput) String added in v0.6.5

func (s DeleteHealthCheckOutput) String() string

String returns the string representation

type DeleteHostedZoneInput

type DeleteHostedZoneInput struct {

	// The ID of the hosted zone you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the hosted zone that you want to delete.

func (DeleteHostedZoneInput) GoString added in v0.6.5

func (s DeleteHostedZoneInput) GoString() string

GoString returns the string representation

func (*DeleteHostedZoneInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (DeleteHostedZoneInput) String added in v0.6.5

func (s DeleteHostedZoneInput) String() string

String returns the string representation

func (*DeleteHostedZoneInput) Validate added in v1.1.21

func (s *DeleteHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHostedZoneOutput

type DeleteHostedZoneOutput struct {

	// A complex type that contains the ID, the status, and the date and time of
	// your delete request.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request.

func (DeleteHostedZoneOutput) GoString added in v0.6.5

func (s DeleteHostedZoneOutput) GoString() string

GoString returns the string representation

func (*DeleteHostedZoneOutput) SetChangeInfo added in v1.5.0

SetChangeInfo sets the ChangeInfo field's value.

func (DeleteHostedZoneOutput) String added in v0.6.5

func (s DeleteHostedZoneOutput) String() string

String returns the string representation

type DeleteReusableDelegationSetInput

type DeleteReusableDelegationSetInput struct {

	// The ID of the reusable delegation set you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the information for the delete request.

func (DeleteReusableDelegationSetInput) GoString added in v0.6.5

GoString returns the string representation

func (*DeleteReusableDelegationSetInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (DeleteReusableDelegationSetInput) String added in v0.6.5

String returns the string representation

func (*DeleteReusableDelegationSetInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DeleteReusableDelegationSetOutput

type DeleteReusableDelegationSetOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteReusableDelegationSetOutput) GoString added in v0.6.5

GoString returns the string representation

func (DeleteReusableDelegationSetOutput) String added in v0.6.5

String returns the string representation

type DeleteTrafficPolicyInput added in v1.0.3

type DeleteTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The version number of the traffic policy that you want to delete.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a specified traffic policy version.

func (DeleteTrafficPolicyInput) GoString added in v1.0.3

func (s DeleteTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*DeleteTrafficPolicyInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (*DeleteTrafficPolicyInput) SetVersion added in v1.5.0

SetVersion sets the Version field's value.

func (DeleteTrafficPolicyInput) String added in v1.0.3

func (s DeleteTrafficPolicyInput) String() string

String returns the string representation

func (*DeleteTrafficPolicyInput) Validate added in v1.1.21

func (s *DeleteTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceInput added in v1.0.3

type DeleteTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to delete.
	//
	// When you delete a traffic policy instance, Amazon Route 53 also deletes all
	// of the resource record sets that were created when you created the traffic
	// policy instance.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy instance that you want to delete.

func (DeleteTrafficPolicyInstanceInput) GoString added in v1.0.3

GoString returns the string representation

func (*DeleteTrafficPolicyInstanceInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (DeleteTrafficPolicyInstanceInput) String added in v1.0.3

String returns the string representation

func (*DeleteTrafficPolicyInstanceInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceOutput added in v1.0.3

type DeleteTrafficPolicyInstanceOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteTrafficPolicyInstanceOutput) GoString added in v1.0.3

GoString returns the string representation

func (DeleteTrafficPolicyInstanceOutput) String added in v1.0.3

String returns the string representation

type DeleteTrafficPolicyOutput added in v1.0.3

type DeleteTrafficPolicyOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteTrafficPolicyOutput) GoString added in v1.0.3

func (s DeleteTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (DeleteTrafficPolicyOutput) String added in v1.0.3

func (s DeleteTrafficPolicyOutput) String() string

String returns the string representation

type DeleteVPCAssociationAuthorizationInput added in v1.5.6

type DeleteVPCAssociationAuthorizationInput struct {

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account,
	// the ID of the hosted zone.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account,
	// a complex type that includes the ID and region of the VPC.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to remove authorization to associate a VPC that was created by one AWS account with a hosted zone that was created with a different AWS account.

func (DeleteVPCAssociationAuthorizationInput) GoString added in v1.5.6

GoString returns the string representation

func (*DeleteVPCAssociationAuthorizationInput) SetHostedZoneId added in v1.5.6

SetHostedZoneId sets the HostedZoneId field's value.

func (*DeleteVPCAssociationAuthorizationInput) SetVPC added in v1.5.6

SetVPC sets the VPC field's value.

func (DeleteVPCAssociationAuthorizationInput) String added in v1.5.6

String returns the string representation

func (*DeleteVPCAssociationAuthorizationInput) Validate added in v1.5.6

Validate inspects the fields of the type to determine if they are valid.

type DeleteVPCAssociationAuthorizationOutput added in v1.5.6

type DeleteVPCAssociationAuthorizationOutput struct {
	// contains filtered or unexported fields
}

Empty response for the request.

func (DeleteVPCAssociationAuthorizationOutput) GoString added in v1.5.6

GoString returns the string representation

func (DeleteVPCAssociationAuthorizationOutput) String added in v1.5.6

String returns the string representation

type Dimension added in v1.1.16

type Dimension struct {

	// For the metric that the CloudWatch alarm is associated with, the name of
	// one dimension.
	//
	// Name is a required field
	Name *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the value of
	// one dimension.
	//
	// Value is a required field
	Value *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

For the metric that the CloudWatch alarm is associated with, a complex type that contains information about one dimension.

func (Dimension) GoString added in v1.1.16

func (s Dimension) GoString() string

GoString returns the string representation

func (*Dimension) SetName added in v1.5.0

func (s *Dimension) SetName(v string) *Dimension

SetName sets the Name field's value.

func (*Dimension) SetValue added in v1.5.0

func (s *Dimension) SetValue(v string) *Dimension

SetValue sets the Value field's value.

func (Dimension) String added in v1.1.16

func (s Dimension) String() string

String returns the string representation

type DisassociateVPCFromHostedZoneInput

type DisassociateVPCFromHostedZoneInput struct {

	// Optional: A comment about the disassociation request.
	Comment *string `type:"string"`

	// The ID of the private hosted zone that you want to disassociate a VPC from.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains information about the VPC that you're disassociating
	// from the specified hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the VPC that you want to disassociate from a specified private hosted zone.

func (DisassociateVPCFromHostedZoneInput) GoString added in v0.6.5

GoString returns the string representation

func (*DisassociateVPCFromHostedZoneInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*DisassociateVPCFromHostedZoneInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*DisassociateVPCFromHostedZoneInput) SetVPC added in v1.5.0

SetVPC sets the VPC field's value.

func (DisassociateVPCFromHostedZoneInput) String added in v0.6.5

String returns the string representation

func (*DisassociateVPCFromHostedZoneInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DisassociateVPCFromHostedZoneOutput

type DisassociateVPCFromHostedZoneOutput struct {

	// A complex type that describes the changes made to the specified private hosted
	// zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the disassociate request.

func (DisassociateVPCFromHostedZoneOutput) GoString added in v0.6.5

GoString returns the string representation

func (*DisassociateVPCFromHostedZoneOutput) SetChangeInfo added in v1.5.0

SetChangeInfo sets the ChangeInfo field's value.

func (DisassociateVPCFromHostedZoneOutput) String added in v0.6.5

String returns the string representation

type GeoLocation

type GeoLocation struct {

	// The two-letter code for the continent.
	//
	// Valid values: AF | AN | AS | EU | OC | NA | SA
	//
	// Constraint: Specifying ContinentCode with either CountryCode or SubdivisionCode
	// returns an InvalidInput error.
	ContinentCode *string `min:"2" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a geo location.

func (GeoLocation) GoString added in v0.6.5

func (s GeoLocation) GoString() string

GoString returns the string representation

func (*GeoLocation) SetContinentCode added in v1.5.0

func (s *GeoLocation) SetContinentCode(v string) *GeoLocation

SetContinentCode sets the ContinentCode field's value.

func (*GeoLocation) SetCountryCode added in v1.5.0

func (s *GeoLocation) SetCountryCode(v string) *GeoLocation

SetCountryCode sets the CountryCode field's value.

func (*GeoLocation) SetSubdivisionCode added in v1.5.0

func (s *GeoLocation) SetSubdivisionCode(v string) *GeoLocation

SetSubdivisionCode sets the SubdivisionCode field's value.

func (GeoLocation) String added in v0.6.5

func (s GeoLocation) String() string

String returns the string representation

func (*GeoLocation) Validate added in v1.1.21

func (s *GeoLocation) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GeoLocationDetails

type GeoLocationDetails struct {

	// The two-letter code for the continent.
	ContinentCode *string `min:"2" type:"string"`

	// The full name of the continent.
	ContinentName *string `min:"1" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The name of the country.
	CountryName *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`

	// The full name of the subdivision, for example, a state in the United States
	// or a province in Canada.
	SubdivisionName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the codes and full continent, country, and subdivision names for the specified geolocation code.

func (GeoLocationDetails) GoString added in v0.6.5

func (s GeoLocationDetails) GoString() string

GoString returns the string representation

func (*GeoLocationDetails) SetContinentCode added in v1.5.0

func (s *GeoLocationDetails) SetContinentCode(v string) *GeoLocationDetails

SetContinentCode sets the ContinentCode field's value.

func (*GeoLocationDetails) SetContinentName added in v1.5.0

func (s *GeoLocationDetails) SetContinentName(v string) *GeoLocationDetails

SetContinentName sets the ContinentName field's value.

func (*GeoLocationDetails) SetCountryCode added in v1.5.0

func (s *GeoLocationDetails) SetCountryCode(v string) *GeoLocationDetails

SetCountryCode sets the CountryCode field's value.

func (*GeoLocationDetails) SetCountryName added in v1.5.0

func (s *GeoLocationDetails) SetCountryName(v string) *GeoLocationDetails

SetCountryName sets the CountryName field's value.

func (*GeoLocationDetails) SetSubdivisionCode added in v1.5.0

func (s *GeoLocationDetails) SetSubdivisionCode(v string) *GeoLocationDetails

SetSubdivisionCode sets the SubdivisionCode field's value.

func (*GeoLocationDetails) SetSubdivisionName added in v1.5.0

func (s *GeoLocationDetails) SetSubdivisionName(v string) *GeoLocationDetails

SetSubdivisionName sets the SubdivisionName field's value.

func (GeoLocationDetails) String added in v0.6.5

func (s GeoLocationDetails) String() string

String returns the string representation

type GetChangeInput

type GetChangeInput struct {

	// The ID of the change batch request. The value that you specify here is the
	// value that ChangeResourceRecordSets returned in the Id element when you submitted
	// the request.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetChange request.

func (GetChangeInput) GoString added in v0.6.5

func (s GetChangeInput) GoString() string

GoString returns the string representation

func (*GetChangeInput) SetId added in v1.5.0

func (s *GetChangeInput) SetId(v string) *GetChangeInput

SetId sets the Id field's value.

func (GetChangeInput) String added in v0.6.5

func (s GetChangeInput) String() string

String returns the string representation

func (*GetChangeInput) Validate added in v1.1.21

func (s *GetChangeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetChangeOutput

type GetChangeOutput struct {

	// A complex type that contains information about the specified change batch.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the ChangeInfo element.

func (GetChangeOutput) GoString added in v0.6.5

func (s GetChangeOutput) GoString() string

GoString returns the string representation

func (*GetChangeOutput) SetChangeInfo added in v1.5.0

func (s *GetChangeOutput) SetChangeInfo(v *ChangeInfo) *GetChangeOutput

SetChangeInfo sets the ChangeInfo field's value.

func (GetChangeOutput) String added in v0.6.5

func (s GetChangeOutput) String() string

String returns the string representation

type GetCheckerIpRangesInput added in v0.9.5

type GetCheckerIpRangesInput struct {
	// contains filtered or unexported fields
}

Empty request.

func (GetCheckerIpRangesInput) GoString added in v0.9.5

func (s GetCheckerIpRangesInput) GoString() string

GoString returns the string representation

func (GetCheckerIpRangesInput) String added in v0.9.5

func (s GetCheckerIpRangesInput) String() string

String returns the string representation

type GetCheckerIpRangesOutput added in v0.9.5

type GetCheckerIpRangesOutput struct {

	// A complex type that contains sorted list of IP ranges in CIDR format for
	// Amazon Route 53 health checkers.
	//
	// CheckerIpRanges is a required field
	CheckerIpRanges []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the CheckerIpRanges element.

func (GetCheckerIpRangesOutput) GoString added in v0.9.5

func (s GetCheckerIpRangesOutput) GoString() string

GoString returns the string representation

func (*GetCheckerIpRangesOutput) SetCheckerIpRanges added in v1.5.0

func (s *GetCheckerIpRangesOutput) SetCheckerIpRanges(v []*string) *GetCheckerIpRangesOutput

SetCheckerIpRanges sets the CheckerIpRanges field's value.

func (GetCheckerIpRangesOutput) String added in v0.9.5

func (s GetCheckerIpRangesOutput) String() string

String returns the string representation

type GetGeoLocationInput

type GetGeoLocationInput struct {

	// Amazon Route 53 supports the following continent codes:
	//
	//    * AF: Africa
	//
	//    * AN: Antarctica
	//
	//    * AS: Asia
	//
	//    * EU: Europe
	//
	//    * OC: Oceania
	//
	//    * NA: North America
	//
	//    * SA: South America
	ContinentCode *string `location:"querystring" locationName:"continentcode" min:"2" type:"string"`

	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	CountryCode *string `location:"querystring" locationName:"countrycode" min:"1" type:"string"`

	// Amazon Route 53 uses the one- to three-letter subdivision codes that are
	// specified in ISO standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	// Amazon Route 53 doesn't support subdivision codes for all countries. If you
	// specify SubdivisionCode, you must also specify CountryCode.
	SubdivisionCode *string `location:"querystring" locationName:"subdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to get a geo location.

func (GetGeoLocationInput) GoString added in v0.6.5

func (s GetGeoLocationInput) GoString() string

GoString returns the string representation

func (*GetGeoLocationInput) SetContinentCode added in v1.5.0

func (s *GetGeoLocationInput) SetContinentCode(v string) *GetGeoLocationInput

SetContinentCode sets the ContinentCode field's value.

func (*GetGeoLocationInput) SetCountryCode added in v1.5.0

func (s *GetGeoLocationInput) SetCountryCode(v string) *GetGeoLocationInput

SetCountryCode sets the CountryCode field's value.

func (*GetGeoLocationInput) SetSubdivisionCode added in v1.5.0

func (s *GetGeoLocationInput) SetSubdivisionCode(v string) *GetGeoLocationInput

SetSubdivisionCode sets the SubdivisionCode field's value.

func (GetGeoLocationInput) String added in v0.6.5

func (s GetGeoLocationInput) String() string

String returns the string representation

func (*GetGeoLocationInput) Validate added in v1.1.21

func (s *GetGeoLocationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetGeoLocationOutput

type GetGeoLocationOutput struct {

	// A complex type that contains the codes and full continent, country, and subdivision
	// names for the specified geolocation code.
	//
	// GeoLocationDetails is a required field
	GeoLocationDetails *GeoLocationDetails `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the specified geolocation code.

func (GetGeoLocationOutput) GoString added in v0.6.5

func (s GetGeoLocationOutput) GoString() string

GoString returns the string representation

func (*GetGeoLocationOutput) SetGeoLocationDetails added in v1.5.0

func (s *GetGeoLocationOutput) SetGeoLocationDetails(v *GeoLocationDetails) *GetGeoLocationOutput

SetGeoLocationDetails sets the GeoLocationDetails field's value.

func (GetGeoLocationOutput) String added in v0.6.5

func (s GetGeoLocationOutput) String() string

String returns the string representation

type GetHealthCheckCountInput

type GetHealthCheckCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your health checks, send a GET request to the /2013-04-01/healthcheckcount resource.

func (GetHealthCheckCountInput) GoString added in v0.6.5

func (s GetHealthCheckCountInput) GoString() string

GoString returns the string representation

func (GetHealthCheckCountInput) String added in v0.6.5

func (s GetHealthCheckCountInput) String() string

String returns the string representation

type GetHealthCheckCountOutput

type GetHealthCheckCountOutput struct {

	// The number of health checks associated with the current AWS account.
	//
	// HealthCheckCount is a required field
	HealthCheckCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a healthcheckcount request.

func (GetHealthCheckCountOutput) GoString added in v0.6.5

func (s GetHealthCheckCountOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckCountOutput) SetHealthCheckCount added in v1.5.0

func (s *GetHealthCheckCountOutput) SetHealthCheckCount(v int64) *GetHealthCheckCountOutput

SetHealthCheckCount sets the HealthCheckCount field's value.

func (GetHealthCheckCountOutput) String added in v0.6.5

func (s GetHealthCheckCountOutput) String() string

String returns the string representation

type GetHealthCheckInput

type GetHealthCheckInput struct {

	// The identifier that Amazon Route 53 assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action gets information about a specified health check.

Send a GET request to the /Amazon Route 53 API version/gethealthcheckrequest resource.

For information about getting information about a health check using the Amazon Route 53 console, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the Amazon Route 53 Developer Guide.

func (GetHealthCheckInput) GoString added in v0.6.5

func (s GetHealthCheckInput) GoString() string

GoString returns the string representation

func (*GetHealthCheckInput) SetHealthCheckId added in v1.5.0

func (s *GetHealthCheckInput) SetHealthCheckId(v string) *GetHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckInput) String added in v0.6.5

func (s GetHealthCheckInput) String() string

String returns the string representation

func (*GetHealthCheckInput) Validate added in v1.1.21

func (s *GetHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonInput

type GetHealthCheckLastFailureReasonInput struct {

	// The ID for the health check for which you want the last failure reason. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action gets the reason that a specified health check failed most recently.

To get the reason for the last failure of a health check, send a GET request to the /2013-04-01/healthcheck/health check ID/lastfailurereason resource.

For information about viewing the last failure reason for a health check using the Amazon Route 53 console, see Viewing Health Check Status and the Reason for Health Check Failures (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-monitor-view-status.html) in the Amazon Route 53 Developer Guide.

func (GetHealthCheckLastFailureReasonInput) GoString added in v0.6.5

GoString returns the string representation

func (*GetHealthCheckLastFailureReasonInput) SetHealthCheckId added in v1.5.0

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckLastFailureReasonInput) String added in v0.6.5

String returns the string representation

func (*GetHealthCheckLastFailureReasonInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonOutput

type GetHealthCheckLastFailureReasonOutput struct {

	// A list that contains one Observation element for each Amazon Route 53 health
	// checker that is reporting a last failure reason.
	//
	// HealthCheckObservations is a required field
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheckLastFailureReason request.

func (GetHealthCheckLastFailureReasonOutput) GoString added in v0.6.5

GoString returns the string representation

func (*GetHealthCheckLastFailureReasonOutput) SetHealthCheckObservations added in v1.5.0

SetHealthCheckObservations sets the HealthCheckObservations field's value.

func (GetHealthCheckLastFailureReasonOutput) String added in v0.6.5

String returns the string representation

type GetHealthCheckOutput

type GetHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request.

func (GetHealthCheckOutput) GoString added in v0.6.5

func (s GetHealthCheckOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckOutput) SetHealthCheck added in v1.5.0

func (s *GetHealthCheckOutput) SetHealthCheck(v *HealthCheck) *GetHealthCheckOutput

SetHealthCheck sets the HealthCheck field's value.

func (GetHealthCheckOutput) String added in v0.6.5

func (s GetHealthCheckOutput) String() string

String returns the string representation

type GetHealthCheckStatusInput

type GetHealthCheckStatusInput struct {

	// If you want Amazon Route 53 to return this resource record set in response
	// to a DNS query only when a health check is passing, include the HealthCheckId
	// element and specify the ID of the applicable health check.
	//
	// Amazon Route 53 determines whether a resource record set is healthy by periodically
	// sending a request to the endpoint that is specified in the health check.
	// If that endpoint returns an HTTP status code of 2xx or 3xx, the endpoint
	// is healthy. If the endpoint returns an HTTP status code of 400 or greater,
	// or if the endpoint doesn't respond for a certain amount of time, Amazon Route
	// 53 considers the endpoint unhealthy and also considers the resource record
	// set unhealthy.
	//
	// The HealthCheckId element is only useful when Amazon Route 53 is choosing
	// between two or more resource record sets to respond to a DNS query, and you
	// want Amazon Route 53 to base the choice in part on the status of a health
	// check. Configuring health checks only makes sense in the following configurations:
	//
	//    * You're checking the health of the resource record sets in a weighted,
	//    latency, geolocation, or failover resource record set, and you specify
	//    health check IDs for all of the resource record sets. If the health check
	//    for one resource record set specifies an endpoint that is not healthy,
	//    Amazon Route 53 stops responding to queries using the value for that resource
	//    record set.
	//
	//    * You set EvaluateTargetHealth to true for the resource record sets in
	//    an alias, weighted alias, latency alias, geolocation alias, or failover
	//    alias resource record set, and you specify health check IDs for all of
	//    the resource record sets that are referenced by the alias resource record
	//    sets. For more information about this configuration, see EvaluateTargetHealth.
	//
	// Amazon Route 53 doesn't check the health of the endpoint specified in the
	//    resource record set, for example, the endpoint specified by the IP address
	//    in the Value element. When you add a HealthCheckId element to a resource
	//    record set, Amazon Route 53 checks the health of the endpoint that you
	//    specified in the health check.
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Amazon
	// Route 53 looks for a resource record set for the larger, associated geographic
	// region. For example, suppose you have resource record sets for a state in
	// the United States, for the United States, for North America, and for all
	// locations. If the endpoint for the state resource record set is unhealthy,
	// Amazon Route 53 checks the resource record sets for the United States, for
	// North America, and for all locations (a resource record set for which the
	// value of CountryCode is *), in that order, until it finds a resource record
	// set for which the endpoint is healthy.
	//
	// If your health checks specify the endpoint only by domain name, we recommend
	// that you create a separate health check for each endpoint. For example, create
	// a health check for each HTTP server that is serving content for www.example.com.
	// For the value of FullyQualifiedDomainName, specify the domain name of the
	// server (such as us-east-1-www.example.com), not the name of the resource
	// record sets (example.com).
	//
	// In this configuration, if you create a health check for which the value of
	// FullyQualifiedDomainName matches the name of the resource record sets and
	// then associate the health check with those resource record sets, health check
	// results will be unpredictable.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to get health check status for a health check.

func (GetHealthCheckStatusInput) GoString added in v0.6.5

func (s GetHealthCheckStatusInput) GoString() string

GoString returns the string representation

func (*GetHealthCheckStatusInput) SetHealthCheckId added in v1.5.0

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckStatusInput) String added in v0.6.5

func (s GetHealthCheckStatusInput) String() string

String returns the string representation

func (*GetHealthCheckStatusInput) Validate added in v1.1.21

func (s *GetHealthCheckStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckStatusOutput

type GetHealthCheckStatusOutput struct {

	// A list that contains one HealthCheckObservation element for each Amazon Route
	// 53 health checker that is reporting a status about the health check endpoint.
	//
	// HealthCheckObservations is a required field
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request.

func (GetHealthCheckStatusOutput) GoString added in v0.6.5

func (s GetHealthCheckStatusOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckStatusOutput) SetHealthCheckObservations added in v1.5.0

SetHealthCheckObservations sets the HealthCheckObservations field's value.

func (GetHealthCheckStatusOutput) String added in v0.6.5

String returns the string representation

type GetHostedZoneCountInput

type GetHostedZoneCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your hosted zones, send a GET request to the /2013-04-01/hostedzonecount resource.

func (GetHostedZoneCountInput) GoString added in v0.6.5

func (s GetHostedZoneCountInput) GoString() string

GoString returns the string representation

func (GetHostedZoneCountInput) String added in v0.6.5

func (s GetHostedZoneCountInput) String() string

String returns the string representation

type GetHostedZoneCountOutput

type GetHostedZoneCountOutput struct {

	// The total number of public and private hosted zones associated with the current
	// AWS account.
	//
	// HostedZoneCount is a required field
	HostedZoneCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a hostedzonecount request.

func (GetHostedZoneCountOutput) GoString added in v0.6.5

func (s GetHostedZoneCountOutput) GoString() string

GoString returns the string representation

func (*GetHostedZoneCountOutput) SetHostedZoneCount added in v1.5.0

func (s *GetHostedZoneCountOutput) SetHostedZoneCount(v int64) *GetHostedZoneCountOutput

SetHostedZoneCount sets the HostedZoneCount field's value.

func (GetHostedZoneCountOutput) String added in v0.6.5

func (s GetHostedZoneCountOutput) String() string

String returns the string representation

type GetHostedZoneInput

type GetHostedZoneInput struct {

	// The ID of the hosted zone for which you want to get a list of the name servers
	// in the delegation set.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetHostedZone request.

func (GetHostedZoneInput) GoString added in v0.6.5

func (s GetHostedZoneInput) GoString() string

GoString returns the string representation

func (*GetHostedZoneInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (GetHostedZoneInput) String added in v0.6.5

func (s GetHostedZoneInput) String() string

String returns the string representation

func (*GetHostedZoneInput) Validate added in v1.1.21

func (s *GetHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHostedZoneOutput

type GetHostedZoneOutput struct {

	// A complex type that describes the name servers for this hosted zone.
	DelegationSet *DelegationSet `type:"structure"`

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`

	// A complex type that contains information about VPCs associated with the specified
	// hosted zone.
	VPCs []*VPC `locationNameList:"VPC" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the hosted zone.

func (GetHostedZoneOutput) GoString added in v0.6.5

func (s GetHostedZoneOutput) GoString() string

GoString returns the string representation

func (*GetHostedZoneOutput) SetDelegationSet added in v1.5.0

func (s *GetHostedZoneOutput) SetDelegationSet(v *DelegationSet) *GetHostedZoneOutput

SetDelegationSet sets the DelegationSet field's value.

func (*GetHostedZoneOutput) SetHostedZone added in v1.5.0

func (s *GetHostedZoneOutput) SetHostedZone(v *HostedZone) *GetHostedZoneOutput

SetHostedZone sets the HostedZone field's value.

func (*GetHostedZoneOutput) SetVPCs added in v1.5.0

func (s *GetHostedZoneOutput) SetVPCs(v []*VPC) *GetHostedZoneOutput

SetVPCs sets the VPCs field's value.

func (GetHostedZoneOutput) String added in v0.6.5

func (s GetHostedZoneOutput) String() string

String returns the string representation

type GetReusableDelegationSetInput

type GetReusableDelegationSetInput struct {

	// The ID of the reusable delegation set for which you want to get a list of
	// the name server.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetReusableDelegationSet request.

func (GetReusableDelegationSetInput) GoString added in v0.6.5

GoString returns the string representation

func (*GetReusableDelegationSetInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (GetReusableDelegationSetInput) String added in v0.6.5

String returns the string representation

func (*GetReusableDelegationSetInput) Validate added in v1.1.21

func (s *GetReusableDelegationSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetReusableDelegationSetOutput

type GetReusableDelegationSetOutput struct {

	// A complex type that contains information about the reusable delegation set.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the GetReusableDelegationSet request.

func (GetReusableDelegationSetOutput) GoString added in v0.6.5

GoString returns the string representation

func (*GetReusableDelegationSetOutput) SetDelegationSet added in v1.5.0

SetDelegationSet sets the DelegationSet field's value.

func (GetReusableDelegationSetOutput) String added in v0.6.5

String returns the string representation

type GetTrafficPolicyInput added in v1.0.3

type GetTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to get information about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The version number of the traffic policy that you want to get information
	// about.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specific traffic policy version. To get the information, send a GET request to the /2013-04-01/trafficpolicy resource, and specify the ID and the version of the traffic policy.

func (GetTrafficPolicyInput) GoString added in v1.0.3

func (s GetTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*GetTrafficPolicyInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (*GetTrafficPolicyInput) SetVersion added in v1.5.0

SetVersion sets the Version field's value.

func (GetTrafficPolicyInput) String added in v1.0.3

func (s GetTrafficPolicyInput) String() string

String returns the string representation

func (*GetTrafficPolicyInput) Validate added in v1.1.21

func (s *GetTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceCountInput added in v1.0.3

type GetTrafficPolicyInstanceCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your traffic policy instances, send a GET request to the /2013-04-01/trafficpolicyinstancecount resource.

func (GetTrafficPolicyInstanceCountInput) GoString added in v1.0.3

GoString returns the string representation

func (GetTrafficPolicyInstanceCountInput) String added in v1.0.3

String returns the string representation

type GetTrafficPolicyInstanceCountOutput added in v1.0.3

type GetTrafficPolicyInstanceCountOutput struct {

	// The number of traffic policy instances that are associated with the current
	// AWS account.
	//
	// TrafficPolicyInstanceCount is a required field
	TrafficPolicyInstanceCount *int64 `type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (GetTrafficPolicyInstanceCountOutput) GoString added in v1.0.3

GoString returns the string representation

func (*GetTrafficPolicyInstanceCountOutput) SetTrafficPolicyInstanceCount added in v1.5.0

SetTrafficPolicyInstanceCount sets the TrafficPolicyInstanceCount field's value.

func (GetTrafficPolicyInstanceCountOutput) String added in v1.0.3

String returns the string representation

type GetTrafficPolicyInstanceInput added in v1.0.3

type GetTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to get information about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specified traffic policy instance.

To get information about a traffic policy instance, send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance/Id resource.

func (GetTrafficPolicyInstanceInput) GoString added in v1.0.3

GoString returns the string representation

func (*GetTrafficPolicyInstanceInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (GetTrafficPolicyInstanceInput) String added in v1.0.3

String returns the string representation

func (*GetTrafficPolicyInstanceInput) Validate added in v1.1.21

func (s *GetTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceOutput added in v1.0.3

type GetTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (GetTrafficPolicyInstanceOutput) GoString added in v1.0.3

GoString returns the string representation

func (*GetTrafficPolicyInstanceOutput) SetTrafficPolicyInstance added in v1.5.0

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (GetTrafficPolicyInstanceOutput) String added in v1.0.3

String returns the string representation

type GetTrafficPolicyOutput added in v1.0.3

type GetTrafficPolicyOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (GetTrafficPolicyOutput) GoString added in v1.0.3

func (s GetTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (*GetTrafficPolicyOutput) SetTrafficPolicy added in v1.5.0

SetTrafficPolicy sets the TrafficPolicy field's value.

func (GetTrafficPolicyOutput) String added in v1.0.3

func (s GetTrafficPolicyOutput) String() string

String returns the string representation

type HealthCheck

type HealthCheck struct {

	// A unique string that you specified when you created the health check.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains information about the CloudWatch alarm that
	// Amazon Route 53 is monitoring for this health check.
	CloudWatchAlarmConfiguration *CloudWatchAlarmConfiguration `type:"structure"`

	// A complex type that contains detailed information about one health check.
	//
	// HealthCheckConfig is a required field
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`

	// The version of the health check. You can optionally pass this value in a
	// call to UpdateHealthCheck to prevent overwriting another change to the health
	// check.
	//
	// HealthCheckVersion is a required field
	HealthCheckVersion *int64 `min:"1" type:"long" required:"true"`

	// The identifier that Amazon Route 53assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about one health check that is associated with the current AWS account.

func (HealthCheck) GoString added in v0.6.5

func (s HealthCheck) GoString() string

GoString returns the string representation

func (*HealthCheck) SetCallerReference added in v1.5.0

func (s *HealthCheck) SetCallerReference(v string) *HealthCheck

SetCallerReference sets the CallerReference field's value.

func (*HealthCheck) SetCloudWatchAlarmConfiguration added in v1.5.0

func (s *HealthCheck) SetCloudWatchAlarmConfiguration(v *CloudWatchAlarmConfiguration) *HealthCheck

SetCloudWatchAlarmConfiguration sets the CloudWatchAlarmConfiguration field's value.

func (*HealthCheck) SetHealthCheckConfig added in v1.5.0

func (s *HealthCheck) SetHealthCheckConfig(v *HealthCheckConfig) *HealthCheck

SetHealthCheckConfig sets the HealthCheckConfig field's value.

func (*HealthCheck) SetHealthCheckVersion added in v1.5.0

func (s *HealthCheck) SetHealthCheckVersion(v int64) *HealthCheck

SetHealthCheckVersion sets the HealthCheckVersion field's value.

func (*HealthCheck) SetId added in v1.5.0

func (s *HealthCheck) SetId(v string) *HealthCheck

SetId sets the Id field's value.

func (HealthCheck) String added in v0.6.5

func (s HealthCheck) String() string

String returns the string representation

type HealthCheckConfig

type HealthCheckConfig struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// (CALCULATED Health Checks Only) A complex type that contains one ChildHealthCheck
	// element for each health check that you want to associate with a CALCULATED
	// health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the client_hello
	// message. If you don't enable SNI, the status of the health check will be
	// SSL alert handshake_failure. A health check can also have that status for
	// other reasons. If SNI is enabled and you're still getting the error, check
	// the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	// If you specify a value forIPAddress:
	//
	// Amazon Route 53 sends health check requests to the specified IPv4 or IPv6
	// address and passes the value of FullyQualifiedDomainName in the Host header
	// for all health checks except TCP health checks. This is typically the fully
	// qualified DNS name of the endpoint on which you want Amazon Route 53 to perform
	// health checks.
	//
	// When Amazon Route 53 checks the health of an endpoint, here is how it constructs
	// the Host header:
	//
	//    * If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for
	//    Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to
	//    the endpoint in the Host header.
	//
	//    * If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH
	//    for Type, Amazon Route 53 passes the value of FullyQualifiedDomainName
	//    to the endpoint in the Host header.
	//
	//    * If you specify another value for Port and any value except TCP for Type,
	//    Amazon Route 53 passes FullyQualifiedDomainName:Port to the endpoint in
	//    the Host header.
	//
	// If you don't specify a value for FullyQualifiedDomainName, Amazon Route 53
	// substitutes the value of IPAddress in the Host header in each of the preceding
	// cases.
	//
	// If you don't specify a value for IPAddress:
	//
	// Amazon Route 53 sends a DNS request to the domain that you specify for FullyQualifiedDomainName
	// at the interval that you specify for RequestInterval. Using an IPv4 address
	// that DNS returns, Amazon Route 53 then checks the health of the endpoint.
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 uses only IPv4
	// to send health checks to the endpoint. If there's no resource record set
	// with a type of A for the name that you specify for FullyQualifiedDomainName,
	// the health check fails with a "DNS resolution failed" error.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-1-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	// In this configuration, if you create a health check for which the value of
	// FullyQualifiedDomainName matches the name of the resource record sets and
	// you then associate the health check with those resource record sets, health
	// check results will be unpredictable.
	//
	// In addition, if the value that you specify for Type is HTTP, HTTPS, HTTP_STR_MATCH,
	// or HTTPS_STR_MATCH, Amazon Route 53 passes the value of FullyQualifiedDomainName
	// in the Host header, as it does when you specify a value for IPAddress. If
	// the value of Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the HealthCheckConfig$ChildHealthChecks
	// and HealthCheckConfig$ChildHealthChecks elements.
	//
	// Note the following:
	//
	//    * If you specify a number greater than the number of child health checks,
	//    Amazon Route 53 always considers this health check to be unhealthy.
	//
	//    * If you specify 0, Amazon Route 53 always considers this health check
	//    to be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53
	// to perform health checks on. If you don't specify a value for IPAddress,
	// Amazon Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address returned by DNS, Amazon Route 53 then checks the health
	// of the endpoint.
	//
	// If the endpoint is an EC2 instance, we recommend that you create an Elastic
	// IP address, associate it with your EC2 instance, and specify the Elastic
	// IP address for IPAddress. This ensures that the IP address of your instance
	// will never change.
	//
	// For more information, see HealthCheckConfig$FullyQualifiedDomainName.
	//
	// Constraints: Amazon Route 53 can't check the health of endpoints for which
	// the IP address is in local, private, non-routable, or multicast ranges. For
	// more information about IP addresses for which you can't create health checks,
	// see the following documents:
	//
	//    * RFC 5735, Special Use IPv4 Addresses (https://tools.ietf.org/html/rfc5735)
	//
	//    * RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space (https://tools.ietf.org/html/rfc6598)
	//
	//    * RFC 5156, Special-Use IPv6 Addresses (https://tools.ietf.org/html/rfc5156)
	//
	// When the value of Type is CALCULATED or CLOUDWATCH_METRIC, omit IPAddress.
	IPAddress *string `type:"string"`

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//    * Healthy: Amazon Route 53 considers the health check to be healthy.
	//
	//    * Unhealthy: Amazon Route 53 considers the health check to be unhealthy.
	//
	//    * LastKnownStatus: Amazon Route 53uses the status of the health check
	//    from the last time CloudWatch had sufficient data to determine the alarm
	//    state. For new health checks that have no last known status, the default
	//    status for the health check is healthy.
	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// Specify whether you want Amazon Route 53 to measure the latency between health
	// checkers in multiple AWS regions and your endpoint, and to display CloudWatch
	// latency graphs on the Health Checks page in the Amazon Route 53 console.
	//
	// You can't change the value of MeasureLatency after you create a health check.
	MeasureLatency *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks. Specify a value for Port only when you specify a value for IPAddress.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region from which
	// you want Amazon Route 53 health checkers to check the specified endpoint.
	Regions []*string `locationNameList:"Region" min:"1" type:"list"`

	// The number of seconds between the time that Amazon Route 53 gets a response
	// from your endpoint and the time that it sends the next health-check request.
	// Each Amazon Route 53 health checker makes requests at this interval.
	//
	// You can't change the value of RequestInterval after you create a health check.
	RequestInterval *int64 `min:"10" type:"integer"`

	// The path, if any, that you want Amazon Route 53 to request when performing
	// health checks. The path can be any value for which your endpoint will return
	// an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example,
	// the file /docs/route53-health-check.html.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy.
	//
	// Amazon Route 53 considers case when searching for SearchString in the response
	// body.
	SearchString *string `type:"string"`

	// The type of health check that you want to create, which indicates how Amazon
	// Route 53 determines whether an endpoint is healthy.
	//
	// You can't change the value of Type after you create a health check.
	//
	// You can create the following types of health checks:
	//
	//    * HTTP: Amazon Route 53 tries to establish a TCP connection. If successful,
	//    Amazon Route 53 submits an HTTP request and waits for an HTTP status code
	//    of 200 or greater and less than 400.
	//
	//    * HTTPS: Amazon Route 53 tries to establish a TCP connection. If successful,
	//    Amazon Route 53 submits an HTTPS request and waits for an HTTP status
	//    code of 200 or greater and less than 400.
	//
	// If you specify HTTPS for the value of Type, the endpoint must support TLS
	//    v1.0 or later.
	//
	//    * HTTP_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	//    If successful, Amazon Route 53 submits an HTTP request and searches the
	//    first 5,120 bytes of the response body for the string that you specify
	//    in SearchString.
	//
	//    * HTTPS_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	//    If successful, Amazon Route 53 submits an HTTPS request and searches the
	//    first 5,120 bytes of the response body for the string that you specify
	//    in SearchString.
	//
	//    * TCP: Amazon Route 53 tries to establish a TCP connection.
	//
	//    * CLOUDWATCH_METRIC: The health check is associated with a CloudWatch
	//    alarm. If the state of the alarm is OK, the health check is considered
	//    healthy. If the state is ALARM, the health check is considered unhealthy.
	//    If CloudWatch doesn't have sufficient data to determine whether the state
	//    is OK or ALARM, the health check status depends on the setting for InsufficientDataHealthStatus:
	//    Healthy, Unhealthy, or LastKnownStatus.
	//
	//    * CALCULATED: For health checks that monitor the status of other health
	//    checks, Amazon Route 53 adds up the number of health checks that Amazon
	//    Route 53 health checkers consider to be healthy and compares that number
	//    with the value of HealthThreshold.
	//
	// For more information about how Amazon Route 53 determines whether an endpoint
	// is healthy, see the introduction to this topic.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"HealthCheckType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health check.

func (HealthCheckConfig) GoString added in v0.6.5

func (s HealthCheckConfig) GoString() string

GoString returns the string representation

func (*HealthCheckConfig) SetAlarmIdentifier added in v1.5.0

func (s *HealthCheckConfig) SetAlarmIdentifier(v *AlarmIdentifier) *HealthCheckConfig

SetAlarmIdentifier sets the AlarmIdentifier field's value.

func (*HealthCheckConfig) SetChildHealthChecks added in v1.5.0

func (s *HealthCheckConfig) SetChildHealthChecks(v []*string) *HealthCheckConfig

SetChildHealthChecks sets the ChildHealthChecks field's value.

func (*HealthCheckConfig) SetEnableSNI added in v1.5.0

func (s *HealthCheckConfig) SetEnableSNI(v bool) *HealthCheckConfig

SetEnableSNI sets the EnableSNI field's value.

func (*HealthCheckConfig) SetFailureThreshold added in v1.5.0

func (s *HealthCheckConfig) SetFailureThreshold(v int64) *HealthCheckConfig

SetFailureThreshold sets the FailureThreshold field's value.

func (*HealthCheckConfig) SetFullyQualifiedDomainName added in v1.5.0

func (s *HealthCheckConfig) SetFullyQualifiedDomainName(v string) *HealthCheckConfig

SetFullyQualifiedDomainName sets the FullyQualifiedDomainName field's value.

func (*HealthCheckConfig) SetHealthThreshold added in v1.5.0

func (s *HealthCheckConfig) SetHealthThreshold(v int64) *HealthCheckConfig

SetHealthThreshold sets the HealthThreshold field's value.

func (*HealthCheckConfig) SetIPAddress added in v1.5.0

func (s *HealthCheckConfig) SetIPAddress(v string) *HealthCheckConfig

SetIPAddress sets the IPAddress field's value.

func (*HealthCheckConfig) SetInsufficientDataHealthStatus added in v1.5.0

func (s *HealthCheckConfig) SetInsufficientDataHealthStatus(v string) *HealthCheckConfig

SetInsufficientDataHealthStatus sets the InsufficientDataHealthStatus field's value.

func (*HealthCheckConfig) SetInverted added in v1.5.0

func (s *HealthCheckConfig) SetInverted(v bool) *HealthCheckConfig

SetInverted sets the Inverted field's value.

func (*HealthCheckConfig) SetMeasureLatency added in v1.5.0

func (s *HealthCheckConfig) SetMeasureLatency(v bool) *HealthCheckConfig

SetMeasureLatency sets the MeasureLatency field's value.

func (*HealthCheckConfig) SetPort added in v1.5.0

func (s *HealthCheckConfig) SetPort(v int64) *HealthCheckConfig

SetPort sets the Port field's value.

func (*HealthCheckConfig) SetRegions added in v1.5.0

func (s *HealthCheckConfig) SetRegions(v []*string) *HealthCheckConfig

SetRegions sets the Regions field's value.

func (*HealthCheckConfig) SetRequestInterval added in v1.5.0

func (s *HealthCheckConfig) SetRequestInterval(v int64) *HealthCheckConfig

SetRequestInterval sets the RequestInterval field's value.

func (*HealthCheckConfig) SetResourcePath added in v1.5.0

func (s *HealthCheckConfig) SetResourcePath(v string) *HealthCheckConfig

SetResourcePath sets the ResourcePath field's value.

func (*HealthCheckConfig) SetSearchString added in v1.5.0

func (s *HealthCheckConfig) SetSearchString(v string) *HealthCheckConfig

SetSearchString sets the SearchString field's value.

func (*HealthCheckConfig) SetType added in v1.5.0

SetType sets the Type field's value.

func (HealthCheckConfig) String added in v0.6.5

func (s HealthCheckConfig) String() string

String returns the string representation

func (*HealthCheckConfig) Validate added in v1.1.21

func (s *HealthCheckConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type HealthCheckObservation

type HealthCheckObservation struct {

	// The IP address of the Amazon Route 53 health checker that provided the failure
	// reason in StatusReport.
	IPAddress *string `type:"string"`

	// The region of the Amazon Route 53 health checker that provided the status
	// in StatusReport.
	Region *string `min:"1" type:"string" enum:"HealthCheckRegion"`

	// A complex type that contains the last failure reason as reported by one Amazon
	// Route 53 health checker and the time of the failed health check.
	StatusReport *StatusReport `type:"structure"`
	// contains filtered or unexported fields
}

A complex type that contains the last failure reason as reported by one Amazon Route 53 health checker.

func (HealthCheckObservation) GoString added in v0.6.5

func (s HealthCheckObservation) GoString() string

GoString returns the string representation

func (*HealthCheckObservation) SetIPAddress added in v1.5.0

SetIPAddress sets the IPAddress field's value.

func (*HealthCheckObservation) SetRegion added in v1.5.0

SetRegion sets the Region field's value.

func (*HealthCheckObservation) SetStatusReport added in v1.5.0

SetStatusReport sets the StatusReport field's value.

func (HealthCheckObservation) String added in v0.6.5

func (s HealthCheckObservation) String() string

String returns the string representation

type HostedZone

type HostedZone struct {

	// The value that you specified for CallerReference when you created the hosted
	// zone.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that includes the Comment and PrivateZone elements. If you
	// omitted the HostedZoneConfig and Comment elements from the request, the Config
	// and Comment elements don't appear in the response.
	Config *HostedZoneConfig `type:"structure"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The name of the domain. For public hosted zones, this is the name that you
	// have registered with your DNS registrar.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see CreateHostedZone.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The number of resource record sets in the hosted zone.
	ResourceRecordSetCount *int64 `type:"long"`
	// contains filtered or unexported fields
}

A complex type that contains general information about the hosted zone.

func (HostedZone) GoString added in v0.6.5

func (s HostedZone) GoString() string

GoString returns the string representation

func (*HostedZone) SetCallerReference added in v1.5.0

func (s *HostedZone) SetCallerReference(v string) *HostedZone

SetCallerReference sets the CallerReference field's value.

func (*HostedZone) SetConfig added in v1.5.0

func (s *HostedZone) SetConfig(v *HostedZoneConfig) *HostedZone

SetConfig sets the Config field's value.

func (*HostedZone) SetId added in v1.5.0

func (s *HostedZone) SetId(v string) *HostedZone

SetId sets the Id field's value.

func (*HostedZone) SetName added in v1.5.0

func (s *HostedZone) SetName(v string) *HostedZone

SetName sets the Name field's value.

func (*HostedZone) SetResourceRecordSetCount added in v1.5.0

func (s *HostedZone) SetResourceRecordSetCount(v int64) *HostedZone

SetResourceRecordSetCount sets the ResourceRecordSetCount field's value.

func (HostedZone) String added in v0.6.5

func (s HostedZone) String() string

String returns the string representation

type HostedZoneConfig

type HostedZoneConfig struct {

	// Any comments that you want to include about the hosted zone.
	Comment *string `type:"string"`

	// A value that indicates whether this is a private hosted zone.
	PrivateZone *bool `type:"boolean"`
	// contains filtered or unexported fields
}

A complex type that contains an optional comment about your hosted zone. If you don't want to specify a comment, omit both the HostedZoneConfig and Comment elements.

func (HostedZoneConfig) GoString added in v0.6.5

func (s HostedZoneConfig) GoString() string

GoString returns the string representation

func (*HostedZoneConfig) SetComment added in v1.5.0

func (s *HostedZoneConfig) SetComment(v string) *HostedZoneConfig

SetComment sets the Comment field's value.

func (*HostedZoneConfig) SetPrivateZone added in v1.5.0

func (s *HostedZoneConfig) SetPrivateZone(v bool) *HostedZoneConfig

SetPrivateZone sets the PrivateZone field's value.

func (HostedZoneConfig) String added in v0.6.5

func (s HostedZoneConfig) String() string

String returns the string representation

type ListGeoLocationsInput

type ListGeoLocationsInput struct {

	// (Optional) The maximum number of geolocations to be included in the response
	// body for this request. If more than MaxItems geolocations remain to be listed,
	// then the value of the IsTruncated element in the response is true.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The code for the continent with which you want to start listing locations
	// that Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextContinentCode
	// from the previous response has a value, enter that value in StartContinentCode
	// to return the next page of results.
	//
	// Include StartContinentCode only if you want to list continents. Don't include
	// StartContinentCode when you're listing countries or countries with their
	// subdivisions.
	StartContinentCode *string `location:"querystring" locationName:"startcontinentcode" min:"2" type:"string"`

	// The code for the country with which you want to start listing locations that
	// Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextCountryCode
	// from the previous response has a value, enter that value in StartCountryCode
	// to return the next page of results.
	//
	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	StartCountryCode *string `location:"querystring" locationName:"startcountrycode" min:"1" type:"string"`

	// The code for the subdivision (for example, state or province) with which
	// you want to start listing locations that Amazon Route 53 supports for geolocation.
	// If Amazon Route 53 has already returned a page or more of results, if IsTruncated
	// is true, and if NextSubdivisionCode from the previous response has a value,
	// enter that value in StartSubdivisionCode to return the next page of results.
	//
	// To list subdivisions of a country, you must include both StartCountryCode
	// and StartSubdivisionCode.
	StartSubdivisionCode *string `location:"querystring" locationName:"startsubdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

To get a list of geographic locations that Amazon Route 53 supports for geolocation, send a GET request to the /Amazon Route 53 API version/geolocations resource. The response to this request includes a GeoLocationDetails element for each location that Amazon Route 53 supports.

Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.

func (ListGeoLocationsInput) GoString added in v0.6.5

func (s ListGeoLocationsInput) GoString() string

GoString returns the string representation

func (*ListGeoLocationsInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListGeoLocationsInput) SetStartContinentCode added in v1.5.0

func (s *ListGeoLocationsInput) SetStartContinentCode(v string) *ListGeoLocationsInput

SetStartContinentCode sets the StartContinentCode field's value.

func (*ListGeoLocationsInput) SetStartCountryCode added in v1.5.0

func (s *ListGeoLocationsInput) SetStartCountryCode(v string) *ListGeoLocationsInput

SetStartCountryCode sets the StartCountryCode field's value.

func (*ListGeoLocationsInput) SetStartSubdivisionCode added in v1.5.0

func (s *ListGeoLocationsInput) SetStartSubdivisionCode(v string) *ListGeoLocationsInput

SetStartSubdivisionCode sets the StartSubdivisionCode field's value.

func (ListGeoLocationsInput) String added in v0.6.5

func (s ListGeoLocationsInput) String() string

String returns the string representation

func (*ListGeoLocationsInput) Validate added in v1.1.21

func (s *ListGeoLocationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListGeoLocationsOutput

type ListGeoLocationsOutput struct {

	// A complex type that contains one GeoLocationDetails element for each location
	// that Amazon Route 53 supports for geolocation.
	//
	// GeoLocationDetailsList is a required field
	GeoLocationDetailsList []*GeoLocationDetails `locationNameList:"GeoLocationDetails" type:"list" required:"true"`

	// A value that indicates whether more locations remain to be listed after the
	// last location in this response. If so, the value of IsTruncated is true.
	// To get more values, submit another request and include the values of NextContinentCode,
	// NextCountryCode, and NextSubdivisionCode in the StartContinentCode, StartCountryCode,
	// and StartSubdivisionCode, as applicable.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for MaxItems in the request.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextContinentCode in the StartContinentCode
	// parameter in another GETListGeoLocations request.
	NextContinentCode *string `min:"2" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextCountryCode in the StartCountryCode parameter
	// in another GETListGeoLocations request.
	NextCountryCode *string `min:"1" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextSubdivisionCode in the StartSubdivisionCode
	// parameter in another GETListGeoLocations request.
	NextSubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request.

func (ListGeoLocationsOutput) GoString added in v0.6.5

func (s ListGeoLocationsOutput) GoString() string

GoString returns the string representation

func (*ListGeoLocationsOutput) SetGeoLocationDetailsList added in v1.5.0

func (s *ListGeoLocationsOutput) SetGeoLocationDetailsList(v []*GeoLocationDetails) *ListGeoLocationsOutput

SetGeoLocationDetailsList sets the GeoLocationDetailsList field's value.

func (*ListGeoLocationsOutput) SetIsTruncated added in v1.5.0

func (s *ListGeoLocationsOutput) SetIsTruncated(v bool) *ListGeoLocationsOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListGeoLocationsOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListGeoLocationsOutput) SetNextContinentCode added in v1.5.0

func (s *ListGeoLocationsOutput) SetNextContinentCode(v string) *ListGeoLocationsOutput

SetNextContinentCode sets the NextContinentCode field's value.

func (*ListGeoLocationsOutput) SetNextCountryCode added in v1.5.0

func (s *ListGeoLocationsOutput) SetNextCountryCode(v string) *ListGeoLocationsOutput

SetNextCountryCode sets the NextCountryCode field's value.

func (*ListGeoLocationsOutput) SetNextSubdivisionCode added in v1.5.0

func (s *ListGeoLocationsOutput) SetNextSubdivisionCode(v string) *ListGeoLocationsOutput

SetNextSubdivisionCode sets the NextSubdivisionCode field's value.

func (ListGeoLocationsOutput) String added in v0.6.5

func (s ListGeoLocationsOutput) String() string

String returns the string representation

type ListHealthChecksInput

type ListHealthChecksInput struct {

	// If the response to a ListHealthChecks is more than one page, marker is the
	// health check ID for the first health check on the next page of results. For
	// more information, see ListHealthChecksResponse$MaxItems.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The maximum number of HealthCheck elements you want ListHealthChecks to return
	// on each page of the response body. If the AWS account includes more HealthCheck
	// elements than the value of maxitems, the response is broken into pages. Each
	// page contains the number of HealthCheck elements specified by maxitems.
	//
	// For example, suppose you specify 10 for maxitems and the current AWS account
	// has 51 health checks. In the response, ListHealthChecks sets ListHealthChecksResponse$IsTruncated
	// to true and includes the ListHealthChecksResponse$NextMarker element. To
	// access the second and subsequent pages, you resend the GETListHealthChecks
	// request, add the ListHealthChecksResponse$Marker parameter to the request,
	// and specify the value of the ListHealthChecksResponse$NextMarker element
	// from the previous response. On the last (sixth) page of the response, which
	// contains only one HealthCheck element:
	//
	//    * The value of ListHealthChecksResponse$IsTruncated is false.
	//
	//    * ListHealthChecksResponse$NextMarker is omitted.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your health checks, send a GET request to the /2013-04-01/healthcheck resource. The response to this request includes a HealthChecks element with zero or more HealthCheck child elements. By default, the list of health checks is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the health check that the list begins with.

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to a value greater than 100, Amazon Route 53 returns only the first 100.

func (ListHealthChecksInput) GoString added in v0.6.5

func (s ListHealthChecksInput) GoString() string

GoString returns the string representation

func (*ListHealthChecksInput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListHealthChecksInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (ListHealthChecksInput) String added in v0.6.5

func (s ListHealthChecksInput) String() string

String returns the string representation

type ListHealthChecksOutput

type ListHealthChecksOutput struct {

	// A complex type that contains one HealthCheck element for each health check
	// that is associated with the current AWS account.
	//
	// HealthChecks is a required field
	HealthChecks []*HealthCheck `locationNameList:"HealthCheck" type:"list" required:"true"`

	// A flag that indicates whether there are more health checks to be listed.
	// If the response was truncated, you can get the next group of maxitems health
	// checks by calling ListHealthChecks again and specifying the value of the
	// NextMarker element in the marker parameter.
	//
	// Valid Values: true | false
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHealthChecks, Marker is the value
	// that you specified for the marker parameter in the previous request.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHealthChecks
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first health
	// check in the next group of maxitems health checks. Call ListHealthChecks
	// again and specify the value of NextMarker in the marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a ListHealthChecks request.

func (ListHealthChecksOutput) GoString added in v0.6.5

func (s ListHealthChecksOutput) GoString() string

GoString returns the string representation

func (*ListHealthChecksOutput) SetHealthChecks added in v1.5.0

func (s *ListHealthChecksOutput) SetHealthChecks(v []*HealthCheck) *ListHealthChecksOutput

SetHealthChecks sets the HealthChecks field's value.

func (*ListHealthChecksOutput) SetIsTruncated added in v1.5.0

func (s *ListHealthChecksOutput) SetIsTruncated(v bool) *ListHealthChecksOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListHealthChecksOutput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListHealthChecksOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListHealthChecksOutput) SetNextMarker added in v1.5.0

SetNextMarker sets the NextMarker field's value.

func (ListHealthChecksOutput) String added in v0.6.5

func (s ListHealthChecksOutput) String() string

String returns the string representation

type ListHostedZonesByNameInput

type ListHostedZonesByNameInput struct {

	// (Optional) For your first request to ListHostedZonesByName, include the dnsname
	// parameter only if you want to specify the name of the first hosted zone in
	// the response. If you don't include the dnsname parameter, Amazon Route 53
	// returns all of the hosted zones that were created by the current AWS account,
	// in ASCII order. For subsequent requests, include both dnsname and hostedzoneid
	// parameters. For dnsname, specify the value of NextDNSName from the previous
	// response.
	DNSName *string `location:"querystring" locationName:"dnsname" type:"string"`

	// (Optional) For your first request to ListHostedZonesByName, do not include
	// the hostedzoneid parameter.
	//
	// If you have more hosted zones than the value of maxitems, ListHostedZonesByName
	// returns only the first maxitems hosted zones. To get the next group of maxitems
	// hosted zones, submit another request to ListHostedZonesByName and include
	// both dnsname and hostedzoneid parameters. For the value of hostedzoneid,
	// specify the value of the NextHostedZoneId element from the previous response.
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of hosted zones to be included in the response body for
	// this request. If you have more than maxitems hosted zones, then the value
	// of the IsTruncated element in the response is true, and the values of NextDNSName
	// and NextHostedZoneId specify the first hosted zone in the next group of maxitems
	// hosted zones.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your public and private hosted zones in ASCII order by domain name, send a GET request to the /Amazon Route 53 API version/hostedzonesbyname resource. The response to this request includes a HostedZone child element for each hosted zone that was created by the current AWS account. ListHostedZonesByName sorts hosted zones by name with the labels reversed, for example:

com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name. ListHostedZonesByName alphabetizes it as: com.ex\344mple. The labels are reversed, and it's alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the Amazon Route 53 Developer Guide.

Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, you can use the MaxItems parameter to list them in groups of up to 100. The response includes values that help you navigate from one group of MaxItems hosted zones to the next:

  • The DNSName and HostedZoneId elements in the response contain the values, if any, that you specified for the dnsname and hostedzoneid parameters in the request that produced the current response.

  • The MaxItems element in the response contains the value, if any, that you specified for the maxitems parameter in the request that produced the current response.

  • If the value of IsTruncated in the response is true, there are more hosted zones associated with the current Amazon Route 53 account.

If IsTruncated is false, this response includes the last hosted zone that

is associated with the current account. The NextDNSName element and NextHostedZoneId
elements are omitted from the response.

* The NextDNSName and NextHostedZoneId elements in the response contain
the domain name and the hosted zone ID of the next hosted zone that is
associated with the current AWS account. If you want to list more hosted
zones, make another call to ListHostedZonesByName, and specify the value
of NextDNSName and NextHostedZoneId in the dnsname and hostedzoneid parameters,
respectively.

func (ListHostedZonesByNameInput) GoString added in v0.6.5

func (s ListHostedZonesByNameInput) GoString() string

GoString returns the string representation

func (*ListHostedZonesByNameInput) SetDNSName added in v1.5.0

SetDNSName sets the DNSName field's value.

func (*ListHostedZonesByNameInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListHostedZonesByNameInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (ListHostedZonesByNameInput) String added in v0.6.5

String returns the string representation

type ListHostedZonesByNameOutput

type ListHostedZonesByNameOutput struct {

	// For the second and subsequent calls to ListHostedZonesByName, DNSName is
	// the value that you specified for the dnsname parameter in the request that
	// produced the current response.
	DNSName *string `type:"string"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	HostedZoneId *string `type:"string"`

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZones is a required field
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag that indicates whether there are more hosted zones to be listed. If
	// the response was truncated, you can get the next group of maxitems hosted
	// zones by calling ListHostedZonesByName again and specifying the values of
	// NextDNSName and NextHostedZoneId elements in the dnsname and hostedzoneid
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZonesByName
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextDNSName is the name of the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextDNSName *string `type:"string"`

	// If IsTruncated is true, the value of NextHostedZoneId identifies the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextHostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListHostedZonesByNameOutput) GoString added in v0.6.5

func (s ListHostedZonesByNameOutput) GoString() string

GoString returns the string representation

func (*ListHostedZonesByNameOutput) SetDNSName added in v1.5.0

SetDNSName sets the DNSName field's value.

func (*ListHostedZonesByNameOutput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListHostedZonesByNameOutput) SetHostedZones added in v1.5.0

SetHostedZones sets the HostedZones field's value.

func (*ListHostedZonesByNameOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListHostedZonesByNameOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListHostedZonesByNameOutput) SetNextDNSName added in v1.5.0

SetNextDNSName sets the NextDNSName field's value.

func (*ListHostedZonesByNameOutput) SetNextHostedZoneId added in v1.5.0

SetNextHostedZoneId sets the NextHostedZoneId field's value.

func (ListHostedZonesByNameOutput) String added in v0.6.5

String returns the string representation

type ListHostedZonesInput

type ListHostedZonesInput struct {

	// If you're using reusable delegation sets and you want to list all of the
	// hosted zones that are associated with a reusable delegation set, specify
	// the ID of that reusable delegation set.
	DelegationSetId *string `location:"querystring" locationName:"delegationsetid" type:"string"`

	// (Optional) If you have more hosted zones than the value of maxitems, ListHostedZones
	// returns only the first maxitems hosted zones. To get the next group of maxitems
	// hosted zones, submit another request to ListHostedZones. For the value of
	// marker, specify the value of the NextMarker element that was returned in
	// the previous response.
	//
	// Hosted zones are listed in the order in which they were created.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// (Optional) The maximum number of hosted zones to be included in the response
	// body for this request. If you have more than maxitems hosted zones, the value
	// of the IsTruncated element in the response is true, and the value of the
	// NextMarker element is the hosted zone ID of the first hosted zone in the
	// next group of maxitems hosted zones.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your public and private hosted zones, send a GET request to the /2013-04-01/hostedzone resource. The response to this request includes a HostedZone child element for each hosted zone that was created by the current AWS account.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100. The response includes four values that help you navigate from one group of maxitems hosted zones to the next:

  • MaxItems is the value that you specified for the maxitems parameter in the request that produced the current response.

  • If the value of IsTruncated in the response is true, there are more hosted zones associated with the current AWS account.

If IsTruncated is false, this response includes the last hosted zone that

is associated with the current account.

* NextMarker is the hosted zone ID of the next hosted zone that is associated
with the current AWS account. If you want to list more hosted zones, make
another call to ListHostedZones, and specify the value of the NextMarker
element in the marker parameter.

If IsTruncated is false, the NextMarker element is omitted from the response.

  • If you're making the second or subsequent call to ListHostedZones, the Marker element matches the value that you specified in the marker parameter in the previous request.

func (ListHostedZonesInput) GoString added in v0.6.5

func (s ListHostedZonesInput) GoString() string

GoString returns the string representation

func (*ListHostedZonesInput) SetDelegationSetId added in v1.5.0

func (s *ListHostedZonesInput) SetDelegationSetId(v string) *ListHostedZonesInput

SetDelegationSetId sets the DelegationSetId field's value.

func (*ListHostedZonesInput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListHostedZonesInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (ListHostedZonesInput) String added in v0.6.5

func (s ListHostedZonesInput) String() string

String returns the string representation

type ListHostedZonesOutput

type ListHostedZonesOutput struct {

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZones is a required field
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag indicating whether there are more hosted zones to be listed. If the
	// response was truncated, you can get the next group of maxitems hosted zones
	// by calling ListHostedZones again and specifying the value of the NextMarker
	// element in the marker parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHostedZones, Marker is the value
	// that you specified for the marker parameter in the request that produced
	// the current response.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZones
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first hosted
	// zone in the next group of maxitems hosted zones. Call ListHostedZones again
	// and specify the value of NextMarker in the marker parameter.
	//
	// This element is present only if IsTruncated is true.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

func (ListHostedZonesOutput) GoString added in v0.6.5

func (s ListHostedZonesOutput) GoString() string

GoString returns the string representation

func (*ListHostedZonesOutput) SetHostedZones added in v1.5.0

func (s *ListHostedZonesOutput) SetHostedZones(v []*HostedZone) *ListHostedZonesOutput

SetHostedZones sets the HostedZones field's value.

func (*ListHostedZonesOutput) SetIsTruncated added in v1.5.0

func (s *ListHostedZonesOutput) SetIsTruncated(v bool) *ListHostedZonesOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListHostedZonesOutput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListHostedZonesOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListHostedZonesOutput) SetNextMarker added in v1.5.0

func (s *ListHostedZonesOutput) SetNextMarker(v string) *ListHostedZonesOutput

SetNextMarker sets the NextMarker field's value.

func (ListHostedZonesOutput) String added in v0.6.5

func (s ListHostedZonesOutput) String() string

String returns the string representation

type ListResourceRecordSetsInput

type ListResourceRecordSetsInput struct {

	// The ID of the hosted zone that contains the resource record sets that you
	// want to get.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// (Optional) The maximum number of resource records sets to include in the
	// response body for this request. If the response includes more than maxitems
	// resource record sets, the value of the IsTruncated element in the response
	// is true, and the values of the NextRecordName and NextRecordType elements
	// in the response identify the first resource record set in the next group
	// of maxitems resource record sets.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// Weighted resource record sets only: If results were truncated for a given
	// DNS name and type, specify the value of NextRecordIdentifier from the previous
	// response to get the next resource record set that has the current DNS name
	// and type.
	StartRecordIdentifier *string `location:"querystring" locationName:"identifier" min:"1" type:"string"`

	// The first name in the lexicographic ordering of domain names that you want
	// the ListResourceRecordSets request to list.
	StartRecordName *string `location:"querystring" locationName:"name" type:"string"`

	// The type of resource record set to begin the record listing from.
	//
	// Valid values for basic resource record sets: A | AAAA | CNAME | MX | NAPTR
	// | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geo, and failover resource record sets: A |
	// AAAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT
	//
	// Values for alias resource record sets:
	//
	//    * CloudFront distribution: A or AAAA
	//
	//    * Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//    * ELB load balancer: A | AAAA
	//
	//    * Amazon S3 bucket: A
	//
	// Constraint: Specifying type without specifying name returns an InvalidInput
	// error.
	StartRecordType *string `location:"querystring" locationName:"type" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

The input for a ListResourceRecordSets request.

func (ListResourceRecordSetsInput) GoString added in v0.6.5

func (s ListResourceRecordSetsInput) GoString() string

GoString returns the string representation

func (*ListResourceRecordSetsInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListResourceRecordSetsInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListResourceRecordSetsInput) SetStartRecordIdentifier added in v1.5.0

func (s *ListResourceRecordSetsInput) SetStartRecordIdentifier(v string) *ListResourceRecordSetsInput

SetStartRecordIdentifier sets the StartRecordIdentifier field's value.

func (*ListResourceRecordSetsInput) SetStartRecordName added in v1.5.0

SetStartRecordName sets the StartRecordName field's value.

func (*ListResourceRecordSetsInput) SetStartRecordType added in v1.5.0

SetStartRecordType sets the StartRecordType field's value.

func (ListResourceRecordSetsInput) String added in v0.6.5

String returns the string representation

func (*ListResourceRecordSetsInput) Validate added in v1.1.21

func (s *ListResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListResourceRecordSetsOutput

type ListResourceRecordSetsOutput struct {

	// A flag that indicates whether more resource record sets remain to be listed.
	// If your results were truncated, you can make a follow-up pagination request
	// by using the NextRecordName element.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The maximum number of records you requested.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// Weighted, latency, geolocation, and failover resource record sets only: If
	// results were truncated for a given DNS name and type, the value of SetIdentifier
	// for the next resource record set that has the current DNS name and type.
	NextRecordIdentifier *string `min:"1" type:"string"`

	// If the results were truncated, the name of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordName *string `type:"string"`

	// If the results were truncated, the type of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordType *string `type:"string" enum:"RRType"`

	// Information about multiple resource record sets.
	//
	// ResourceRecordSets is a required field
	ResourceRecordSets []*ResourceRecordSet `locationNameList:"ResourceRecordSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains list information for the resource record set.

func (ListResourceRecordSetsOutput) GoString added in v0.6.5

func (s ListResourceRecordSetsOutput) GoString() string

GoString returns the string representation

func (*ListResourceRecordSetsOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListResourceRecordSetsOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordIdentifier added in v1.5.0

func (s *ListResourceRecordSetsOutput) SetNextRecordIdentifier(v string) *ListResourceRecordSetsOutput

SetNextRecordIdentifier sets the NextRecordIdentifier field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordName added in v1.5.0

SetNextRecordName sets the NextRecordName field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordType added in v1.5.0

SetNextRecordType sets the NextRecordType field's value.

func (*ListResourceRecordSetsOutput) SetResourceRecordSets added in v1.5.0

SetResourceRecordSets sets the ResourceRecordSets field's value.

func (ListResourceRecordSetsOutput) String added in v0.6.5

String returns the string representation

type ListReusableDelegationSetsInput

type ListReusableDelegationSetsInput struct {

	// If you're making the second or subsequent call to ListReusableDelegationSets,
	// the Marker element matches the value that you specified in the marker parameter
	// in the previous request.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The value that you specified for the maxitems parameter in the request that
	// produced the current response.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your reusable delegation sets, send a GET request to the /2013-04-01/delegationset resource. The response to this request includes a DelegationSets element with zero or more DelegationSet child elements. By default, the list of reusable delegation sets is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the delegation set that the list begins with.

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to a value greater than 100, Amazon Route 53 returns only the first 100.

func (ListReusableDelegationSetsInput) GoString added in v0.6.5

GoString returns the string representation

func (*ListReusableDelegationSetsInput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListReusableDelegationSetsInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (ListReusableDelegationSetsInput) String added in v0.6.5

String returns the string representation

type ListReusableDelegationSetsOutput

type ListReusableDelegationSetsOutput struct {

	// A complex type that contains one DelegationSet element for each reusable
	// delegation set that was created by the current AWS account.
	//
	// DelegationSets is a required field
	DelegationSets []*DelegationSet `locationNameList:"DelegationSet" type:"list" required:"true"`

	// A flag that indicates whether there are more reusable delegation sets to
	// be listed. If the response is truncated, you can get the next group of maxitems
	// reusable delegation sets by calling ListReusableDelegationSets again and
	// specifying the value of the NextMarker element in the marker parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListReusableDelegationSets, Marker
	// is the value that you specified for the marker parameter in the request that
	// produced the current response.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListReusableDelegationSets
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first reusable
	// delegation set in the next group of maxitems reusable delegation sets. Call
	// ListReusableDelegationSets again and specify the value of NextMarker in the
	// marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about the reusable delegation sets that are associated with the current AWS account.

func (ListReusableDelegationSetsOutput) GoString added in v0.6.5

GoString returns the string representation

func (*ListReusableDelegationSetsOutput) SetDelegationSets added in v1.5.0

SetDelegationSets sets the DelegationSets field's value.

func (*ListReusableDelegationSetsOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListReusableDelegationSetsOutput) SetMarker added in v1.5.0

SetMarker sets the Marker field's value.

func (*ListReusableDelegationSetsOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListReusableDelegationSetsOutput) SetNextMarker added in v1.5.0

SetNextMarker sets the NextMarker field's value.

func (ListReusableDelegationSetsOutput) String added in v0.6.5

String returns the string representation

type ListTagsForResourceInput

type ListTagsForResourceInput struct {

	// The ID of the resource for which you want to retrieve tags.
	//
	// ResourceId is a required field
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type containing information about a request for a list of the tags that are associated with an individual resource.

func (ListTagsForResourceInput) GoString added in v0.6.5

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceInput) SetResourceId added in v1.5.0

SetResourceId sets the ResourceId field's value.

func (*ListTagsForResourceInput) SetResourceType added in v1.5.0

SetResourceType sets the ResourceType field's value.

func (ListTagsForResourceInput) String added in v0.6.5

func (s ListTagsForResourceInput) String() string

String returns the string representation

func (*ListTagsForResourceInput) Validate added in v1.1.21

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourceOutput

type ListTagsForResourceOutput struct {

	// A ResourceTagSet containing tags associated with the specified resource.
	//
	// ResourceTagSet is a required field
	ResourceTagSet *ResourceTagSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

func (ListTagsForResourceOutput) GoString added in v0.6.5

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceOutput) SetResourceTagSet added in v1.5.0

SetResourceTagSet sets the ResourceTagSet field's value.

func (ListTagsForResourceOutput) String added in v0.6.5

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type ListTagsForResourcesInput

type ListTagsForResourcesInput struct {

	// A complex type that contains the ResourceId element for each resource for
	// which you want to get a list of tags.
	//
	// ResourceIds is a required field
	ResourceIds []*string `locationNameList:"ResourceId" min:"1" type:"list" required:"true"`

	// The type of the resources.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

func (ListTagsForResourcesInput) GoString added in v0.6.5

func (s ListTagsForResourcesInput) GoString() string

GoString returns the string representation

func (*ListTagsForResourcesInput) SetResourceIds added in v1.5.0

SetResourceIds sets the ResourceIds field's value.

func (*ListTagsForResourcesInput) SetResourceType added in v1.5.0

SetResourceType sets the ResourceType field's value.

func (ListTagsForResourcesInput) String added in v0.6.5

func (s ListTagsForResourcesInput) String() string

String returns the string representation

func (*ListTagsForResourcesInput) Validate added in v1.1.21

func (s *ListTagsForResourcesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourcesOutput

type ListTagsForResourcesOutput struct {

	// A list of ResourceTagSets containing tags associated with the specified resources.
	//
	// ResourceTagSets is a required field
	ResourceTagSets []*ResourceTagSet `locationNameList:"ResourceTagSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing tags for the specified resources.

func (ListTagsForResourcesOutput) GoString added in v0.6.5

func (s ListTagsForResourcesOutput) GoString() string

GoString returns the string representation

func (*ListTagsForResourcesOutput) SetResourceTagSets added in v1.5.0

SetResourceTagSets sets the ResourceTagSets field's value.

func (ListTagsForResourcesOutput) String added in v0.6.5

String returns the string representation

type ListTrafficPoliciesInput added in v1.0.3

type ListTrafficPoliciesInput struct {

	// (Optional) The maximum number of traffic policies to be included in the response
	// body for this request. If you have more than MaxItems traffic policies, the
	// value of the IsTruncated element in the response is true, and the value of
	// the TrafficPolicyIdMarker element is the ID of the first traffic policy in
	// the next group of MaxItems traffic policies.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// (Conditional) For your first request to ListTrafficPolicies, do not include
	// the TrafficPolicyIdMarker parameter.
	//
	// If you have more traffic policies than the value of MaxItems, ListTrafficPolicies
	// returns only the first MaxItems traffic policies. To get the next group of
	// MaxItems policies, submit another request to ListTrafficPolicies. For the
	// value of TrafficPolicyIdMarker, specify the value of the TrafficPolicyIdMarker
	// element that was returned in the previous response.
	//
	// Policies are listed in the order in which they were created.
	TrafficPolicyIdMarker *string `location:"querystring" locationName:"trafficpolicyid" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list the traffic policies that are associated with the current AWS account.

func (ListTrafficPoliciesInput) GoString added in v1.0.3

func (s ListTrafficPoliciesInput) GoString() string

GoString returns the string representation

func (*ListTrafficPoliciesInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPoliciesInput) SetTrafficPolicyIdMarker added in v1.5.0

func (s *ListTrafficPoliciesInput) SetTrafficPolicyIdMarker(v string) *ListTrafficPoliciesInput

SetTrafficPolicyIdMarker sets the TrafficPolicyIdMarker field's value.

func (ListTrafficPoliciesInput) String added in v1.0.3

func (s ListTrafficPoliciesInput) String() string

String returns the string representation

type ListTrafficPoliciesOutput added in v1.0.3

type ListTrafficPoliciesOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of MaxItems traffic
	// policies by calling ListTrafficPolicies again and specifying the value of
	// the TrafficPolicyIdMarker element in the TrafficPolicyIdMarker request parameter.
	//
	// Valid Values: true | false
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicies
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If the value of IsTruncated is true, TrafficPolicyIdMarker is the ID of the
	// first traffic policy in the next group of MaxItems traffic policies.
	//
	// TrafficPolicyIdMarker is a required field
	TrafficPolicyIdMarker *string `type:"string" required:"true"`

	// A list that contains one TrafficPolicySummary element for each traffic policy
	// that was created by the current AWS account.
	//
	// TrafficPolicySummaries is a required field
	TrafficPolicySummaries []*TrafficPolicySummary `locationNameList:"TrafficPolicySummary" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPoliciesOutput) GoString added in v1.0.3

func (s ListTrafficPoliciesOutput) GoString() string

GoString returns the string representation

func (*ListTrafficPoliciesOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPoliciesOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPoliciesOutput) SetTrafficPolicyIdMarker added in v1.5.0

func (s *ListTrafficPoliciesOutput) SetTrafficPolicyIdMarker(v string) *ListTrafficPoliciesOutput

SetTrafficPolicyIdMarker sets the TrafficPolicyIdMarker field's value.

func (*ListTrafficPoliciesOutput) SetTrafficPolicySummaries added in v1.5.0

func (s *ListTrafficPoliciesOutput) SetTrafficPolicySummaries(v []*TrafficPolicySummary) *ListTrafficPoliciesOutput

SetTrafficPolicySummaries sets the TrafficPolicySummaries field's value.

func (ListTrafficPoliciesOutput) String added in v1.0.3

func (s ListTrafficPoliciesOutput) String() string

String returns the string representation

type ListTrafficPolicyInstancesByHostedZoneInput added in v1.0.3

type ListTrafficPolicyInstancesByHostedZoneInput struct {

	// The ID of the hosted zone for which you want to list traffic policy instances.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByHostedZone, omit this
	// value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByHostedZone, omit this
	// value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A request for the traffic policy instances that you created in a specified hosted zone.

func (ListTrafficPolicyInstancesByHostedZoneInput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetHostedZoneId added in v1.5.0

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (ListTrafficPolicyInstancesByHostedZoneInput) String added in v1.0.3

String returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByHostedZoneOutput added in v1.0.3

type ListTrafficPolicyInstancesByHostedZoneOutput struct {

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstancesByHostedZone
	// again and specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstancesByHostedZone
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesByHostedZoneOutput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstances added in v1.5.0

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesByHostedZoneOutput) String added in v1.0.3

String returns the string representation

type ListTrafficPolicyInstancesByPolicyInput added in v1.0.3

type ListTrafficPolicyInstancesByPolicyInput struct {

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, HostedZoneIdMarker
	// is the ID of the hosted zone for the first traffic policy instance in the
	// next group of MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The ID of the traffic policy for which you want to list traffic policy instances.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`

	// The version of the traffic policy for which you want to list traffic policy
	// instances. The version must be associated with the traffic policy that is
	// specified by TrafficPolicyId.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `location:"querystring" locationName:"version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policy instances.

func (ListTrafficPolicyInstancesByPolicyInput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesByPolicyInput) SetHostedZoneIdMarker added in v1.5.0

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyId added in v1.5.0

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyVersion added in v1.5.0

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (ListTrafficPolicyInstancesByPolicyInput) String added in v1.0.3

String returns the string representation

func (*ListTrafficPolicyInstancesByPolicyInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByPolicyOutput added in v1.0.3

type ListTrafficPolicyInstancesByPolicyOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstancesByPolicy again
	// and specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstancesByPolicy
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesByPolicyOutput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesByPolicyOutput) SetHostedZoneIdMarker added in v1.5.0

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstances added in v1.5.0

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesByPolicyOutput) String added in v1.0.3

String returns the string representation

type ListTrafficPolicyInstancesInput added in v1.0.3

type ListTrafficPolicyInstancesInput struct {

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get the next group of MaxItems traffic policy
	// instances, submit another ListTrafficPolicyInstances request. For the value
	// of HostedZoneIdMarker, specify the value of HostedZoneIdMarker from the previous
	// response, which is the hosted zone ID of the first traffic policy instance
	// in the next group of MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policy instances.

func (ListTrafficPolicyInstancesInput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesInput) SetHostedZoneIdMarker added in v1.5.0

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

func (s *ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceNameMarker(v string) *ListTrafficPolicyInstancesInput

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

func (s *ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceTypeMarker(v string) *ListTrafficPolicyInstancesInput

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (ListTrafficPolicyInstancesInput) String added in v1.0.3

String returns the string representation

type ListTrafficPolicyInstancesOutput added in v1.0.3

type ListTrafficPolicyInstancesOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstances again and
	// specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstances
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesOutput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyInstancesOutput) SetHostedZoneIdMarker added in v1.5.0

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceNameMarker added in v1.5.0

func (s *ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceNameMarker(v string) *ListTrafficPolicyInstancesOutput

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceTypeMarker added in v1.5.0

func (s *ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceTypeMarker(v string) *ListTrafficPolicyInstancesOutput

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstances added in v1.5.0

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesOutput) String added in v1.0.3

String returns the string representation

type ListTrafficPolicyVersionsInput added in v1.0.3

type ListTrafficPolicyVersionsInput struct {

	// Specify the value of Id of the traffic policy for which you want to list
	// all versions.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The maximum number of traffic policy versions that you want Amazon Route
	// 53 to include in the response body for this request. If the specified traffic
	// policy has more than MaxItems versions, the value of the IsTruncated element
	// in the response is true, and the value of the TrafficPolicyVersionMarker
	// element is the ID of the first version in the next group of MaxItems traffic
	// policy versions.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For your first request to ListTrafficPolicyVersions, do not include the TrafficPolicyVersionMarker
	// parameter.
	//
	// If you have more traffic policy versions than the value of MaxItems, ListTrafficPolicyVersions
	// returns only the first group of MaxItems versions. To get the next group
	// of MaxItems traffic policy versions, submit another request to ListTrafficPolicyVersions.
	// For the value of TrafficPolicyVersionMarker, specify the value of the TrafficPolicyVersionMarker
	// element that was returned in the previous response.
	//
	// Traffic policy versions are listed in sequential order.
	TrafficPolicyVersionMarker *string `location:"querystring" locationName:"trafficpolicyversion" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policies.

func (ListTrafficPolicyVersionsInput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyVersionsInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (*ListTrafficPolicyVersionsInput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyVersionsInput) SetTrafficPolicyVersionMarker added in v1.5.0

func (s *ListTrafficPolicyVersionsInput) SetTrafficPolicyVersionMarker(v string) *ListTrafficPolicyVersionsInput

SetTrafficPolicyVersionMarker sets the TrafficPolicyVersionMarker field's value.

func (ListTrafficPolicyVersionsInput) String added in v1.0.3

String returns the string representation

func (*ListTrafficPolicyVersionsInput) Validate added in v1.1.21

func (s *ListTrafficPolicyVersionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyVersionsOutput added in v1.0.3

type ListTrafficPolicyVersionsOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of maxitems traffic
	// policies by calling ListTrafficPolicyVersions again and specifying the value
	// of the NextMarker element in the marker parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListTrafficPolicyVersions
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// A list that contains one TrafficPolicy element for each traffic policy version
	// that is associated with the specified traffic policy.
	//
	// TrafficPolicies is a required field
	TrafficPolicies []*TrafficPolicy `locationNameList:"TrafficPolicy" type:"list" required:"true"`

	// If IsTruncated is true, the value of TrafficPolicyVersionMarker identifies
	// the first traffic policy in the next group of MaxItems traffic policies.
	// Call ListTrafficPolicyVersions again and specify the value of TrafficPolicyVersionMarker
	// in the TrafficPolicyVersionMarker request parameter.
	//
	// This element is present only if IsTruncated is true.
	//
	// TrafficPolicyVersionMarker is a required field
	TrafficPolicyVersionMarker *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyVersionsOutput) GoString added in v1.0.3

GoString returns the string representation

func (*ListTrafficPolicyVersionsOutput) SetIsTruncated added in v1.5.0

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyVersionsOutput) SetMaxItems added in v1.5.0

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyVersionsOutput) SetTrafficPolicies added in v1.5.0

SetTrafficPolicies sets the TrafficPolicies field's value.

func (*ListTrafficPolicyVersionsOutput) SetTrafficPolicyVersionMarker added in v1.5.0

func (s *ListTrafficPolicyVersionsOutput) SetTrafficPolicyVersionMarker(v string) *ListTrafficPolicyVersionsOutput

SetTrafficPolicyVersionMarker sets the TrafficPolicyVersionMarker field's value.

func (ListTrafficPolicyVersionsOutput) String added in v1.0.3

String returns the string representation

type ListVPCAssociationAuthorizationsInput added in v1.5.6

type ListVPCAssociationAuthorizationsInput struct {

	// The ID of the hosted zone for which you want a list of VPCs that can be associated
	// with the hosted zone.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// Optional: An integer that specifies the maximum number of VPCs that you want
	// Amazon Route 53 to return.
	MaxResults *string `location:"querystring" locationName:"maxresults" type:"string"`

	// Optional: If a response includes a NextToken element, there are more VPCs
	// that can be associated with the specified hosted zone. To get the next page
	// of results, submit another request, and include the value of the NextToken
	// element in from the response in the NextToken parameter in another ListVPCAssociationAuthorizations
	// request.
	NextToken *string `location:"querystring" locationName:"nexttoken" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about that can be associated with your hosted zone.

func (ListVPCAssociationAuthorizationsInput) GoString added in v1.5.6

GoString returns the string representation

func (*ListVPCAssociationAuthorizationsInput) SetHostedZoneId added in v1.5.6

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListVPCAssociationAuthorizationsInput) SetMaxResults added in v1.5.6

SetMaxResults sets the MaxResults field's value.

func (*ListVPCAssociationAuthorizationsInput) SetNextToken added in v1.5.6

SetNextToken sets the NextToken field's value.

func (ListVPCAssociationAuthorizationsInput) String added in v1.5.6

String returns the string representation

func (*ListVPCAssociationAuthorizationsInput) Validate added in v1.5.6

Validate inspects the fields of the type to determine if they are valid.

type ListVPCAssociationAuthorizationsOutput added in v1.5.6

type ListVPCAssociationAuthorizationsOutput struct {

	// The ID of the hosted zone that you can associate the listed VPCs with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// When the response includes a NextToken element, there are more VPCs that
	// can be associated with the specified hosted zone. To get the next page of
	// VPCs, submit another ListVPCAssociationAuthorizations request, and include
	// the value of the NextToken element from the response in the NextToken request
	// parameter:
	//
	// /2013-04-01/hostedzone/hosted zone ID/authorizevpcassociation?MaxItems=VPCs
	// per page&NextToken=
	NextToken *string `type:"string"`

	// The list of VPCs that are authorized to be associated with the specified
	// hosted zone.
	//
	// VPCs is a required field
	VPCs []*VPC `locationNameList:"VPC" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListVPCAssociationAuthorizationsOutput) GoString added in v1.5.6

GoString returns the string representation

func (*ListVPCAssociationAuthorizationsOutput) SetHostedZoneId added in v1.5.6

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListVPCAssociationAuthorizationsOutput) SetNextToken added in v1.5.6

SetNextToken sets the NextToken field's value.

func (*ListVPCAssociationAuthorizationsOutput) SetVPCs added in v1.5.6

SetVPCs sets the VPCs field's value.

func (ListVPCAssociationAuthorizationsOutput) String added in v1.5.6

String returns the string representation

type ResourceRecord

type ResourceRecord struct {

	// The current or new DNS record value, not to exceed 4,000 characters. In the
	// case of a DELETE action, if the current value does not match the actual value,
	// an error is returned. For descriptions about how to format Value for different
	// record types, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can specify more than one value for all record types except CNAME and
	// SOA.
	//
	// If you are creating an alias resource record set, omit Value.
	//
	// Value is a required field
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information specific to the resource record.

If you are creating an alias resource record set, omit ResourceRecord.

func (ResourceRecord) GoString added in v0.6.5

func (s ResourceRecord) GoString() string

GoString returns the string representation

func (*ResourceRecord) SetValue added in v1.5.0

func (s *ResourceRecord) SetValue(v string) *ResourceRecord

SetValue sets the Value field's value.

func (ResourceRecord) String added in v0.6.5

func (s ResourceRecord) String() string

String returns the string representation

func (*ResourceRecord) Validate added in v1.1.21

func (s *ResourceRecord) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceRecordSet

type ResourceRecordSet struct {

	// Alias resource record sets only: Information about the CloudFront distribution,
	// AWS Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or
	// Amazon Route 53 resource record set to which you are redirecting queries.
	// The AWS Elastic Beanstalk environment must have a regionalized subdomain.
	//
	// If you're creating resource records sets for a private hosted zone, note
	// the following:
	//
	//    * You can't create alias resource record sets for CloudFront distributions
	//    in a private hosted zone.
	//
	//    * Creating geolocation alias resource record sets or latency alias resource
	//    record sets in a private hosted zone is unsupported.
	//
	//    * For information about creating failover resource record sets in a private
	//    hosted zone, see Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//    in the Amazon Route 53 Developer Guide.
	AliasTarget *AliasTarget `type:"structure"`

	// Failover resource record sets only: To configure failover, you add the Failover
	// element to two resource record sets. For one resource record set, you specify
	// PRIMARY as the value for Failover; for the other resource record set, you
	// specify SECONDARY. In addition, you include the HealthCheckId element and
	// specify the health check that you want Amazon Route 53 to perform for each
	// resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have
	// included the HealthCheckId element in both resource record sets:
	//
	//    * When the primary resource record set is healthy, Amazon Route 53 responds
	//    to DNS queries with the applicable value from the primary resource record
	//    set regardless of the health of the secondary resource record set.
	//
	//    * When the primary resource record set is unhealthy and the secondary
	//    resource record set is healthy, Amazon Route 53 responds to DNS queries
	//    with the applicable value from the secondary resource record set.
	//
	//    * When the secondary resource record set is unhealthy, Amazon Route 53
	//    responds to DNS queries with the applicable value from the primary resource
	//    record set regardless of the health of the primary resource record set.
	//
	//    * If you omit the HealthCheckId element for the secondary resource record
	//    set, and if the primary resource record set is unhealthy, Amazon Route
	//    53 always responds to DNS queries with the applicable value from the secondary
	//    resource record set. This is true regardless of the health of the associated
	//    endpoint.
	//
	// You can't create non-failover resource record sets that have the same values
	// for the Name and Type elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the EvaluateTargetHealth
	// element and set the value to true.
	//
	// For more information about configuring failover for Amazon Route 53, see
	// the following topics in the Amazon Route 53 Developer Guide:
	//
	//    * Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    * Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//
	// Valid values: PRIMARY | SECONDARY
	Failover *string `type:"string" enum:"ResourceRecordSetFailover"`

	// Geo location resource record sets only: A complex type that lets you control
	// how Amazon Route 53 responds to DNS queries based on the geographic origin
	// of the query. For example, if you want all queries from Africa to be routed
	// to a web server with an IP address of 192.0.2.111, create a resource record
	// set with a Type of A and a ContinentCode of AF.
	//
	// Creating geolocation and geolocation alias resource record sets in private
	// hosted zones is not supported.
	//
	// If you create separate resource record sets for overlapping geographic regions
	// (for example, one resource record set for a continent and one for a country
	// on the same continent), priority goes to the smallest geographic region.
	// This allows you to route most queries for a continent to one resource and
	// to route queries for a country on that continent to a different resource.
	//
	// You can't create two geolocation resource record sets that specify the same
	// geographic location.
	//
	// The value * in the CountryCode element matches all geographic locations that
	// aren't specified in other geolocation resource record sets that have the
	// same values for the Name and Type elements.
	//
	// Geolocation works by mapping IP addresses to locations. However, some IP
	// addresses aren't mapped to geographic locations, so even if you create geolocation
	// resource record sets that cover all seven continents, Amazon Route 53 will
	// receive some DNS queries from locations that it can't identify. We recommend
	// that you create a resource record set for which the value of CountryCode
	// is *, which handles both queries that come from locations for which you haven't
	// created geolocation resource record sets and queries from IP addresses that
	// aren't mapped to a location. If you don't create a * resource record set,
	// Amazon Route 53 returns a "no answer" response for queries from those locations.
	//
	// You can't create non-geolocation resource record sets that have the same
	// values for the Name and Type elements as geolocation resource record sets.
	GeoLocation *GeoLocation `type:"structure"`

	// If you want Amazon Route 53 to return this resource record set in response
	// to a DNS query only when a health check is passing, include the HealthCheckId
	// element and specify the ID of the applicable health check.
	//
	// Amazon Route 53 determines whether a resource record set is healthy based
	// on one of the following:
	//
	//    * By periodically sending a request to the endpoint that is specified
	//    in the health check
	//
	//    * By aggregating the status of a specified group of health checks (calculated
	//    health checks)
	//
	//    * By determining the current state of a CloudWatch alarm (CloudWatch metric
	//    health checks)
	//
	// For information about how Amazon Route 53 determines whether a health check
	// is healthy, see CreateHealthCheck.
	//
	// The HealthCheckId element is only useful when Amazon Route 53 is choosing
	// between two or more resource record sets to respond to a DNS query, and you
	// want Amazon Route 53 to base the choice in part on the status of a health
	// check. Configuring health checks only makes sense in the following configurations:
	//
	//    * You're checking the health of the resource record sets in a weighted,
	//    latency, geolocation, or failover resource record set, and you specify
	//    health check IDs for all of the resource record sets. If the health check
	//    for one resource record set specifies an endpoint that is not healthy,
	//    Amazon Route 53 stops responding to queries using the value for that resource
	//    record set.
	//
	//    * You set EvaluateTargetHealth to true for the resource record sets in
	//    an alias, weighted alias, latency alias, geolocation alias, or failover
	//    alias resource record set, and you specify health check IDs for all of
	//    the resource record sets that are referenced by the alias resource record
	//    sets.
	//
	// Amazon Route 53 doesn't check the health of the endpoint specified in the
	// resource record set, for example, the endpoint specified by the IP address
	// in the Value element. When you add a HealthCheckId element to a resource
	// record set, Amazon Route 53 checks the health of the endpoint that you specified
	// in the health check.
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Amazon
	// Route 53 looks for a resource record set for the larger, associated geographic
	// region. For example, suppose you have resource record sets for a state in
	// the United States, for the United States, for North America, and for all
	// locations. If the endpoint for the state resource record set is unhealthy,
	// Amazon Route 53 checks the resource record sets for the United States, for
	// North America, and for all locations (a resource record set for which the
	// value of CountryCode is *), in that order, until it finds a resource record
	// set for which the endpoint is healthy.
	//
	// If your health checks specify the endpoint only by domain name, we recommend
	// that you create a separate health check for each endpoint. For example, create
	// a health check for each HTTP server that is serving content for www.example.com.
	// For the value of FullyQualifiedDomainName, specify the domain name of the
	// server (such as us-east-1-www.example.com), not the name of the resource
	// record sets (example.com).
	//
	// n this configuration, if you create a health check for which the value of
	// FullyQualifiedDomainName matches the name of the resource record sets and
	// then associate the health check with those resource record sets, health check
	// results will be unpredictable.
	//
	// For more information, see the following topics in the Amazon Route 53 Developer
	// Guide:
	//
	//    * Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    * Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	HealthCheckId *string `type:"string"`

	// The name of the domain you want to perform the action on.
	//
	// Enter a fully qualified domain name, for example, www.example.com. You can
	// optionally include a trailing dot. If you omit the trailing dot, Amazon Route
	// 53 still assumes that the domain name that you specify is fully qualified.
	// This means that Amazon Route 53 treats www.example.com (without a trailing
	// dot) and www.example.com. (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see DNS Domain
	// Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a
	// domain name. For example, *.example.com. Note the following:
	//
	//    * The * must replace the entire label. For example, you can't specify
	//    *prod.example.com or prod*.example.com.
	//
	//    * The * can't replace any of the middle labels, for example, marketing.*.example.com.
	//
	//    * If you include * in any position other than the leftmost label in a
	//    domain name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	// You can't use the * wildcard for resource records sets that have a type of
	//    NS.
	//
	// You can use the * wildcard as the leftmost label in a domain name, for example,
	// *.example.com. You can't use an * for one of the middle labels, for example,
	// marketing.*.example.com. In addition, the * must replace the entire label;
	// for example, you can't specify prod*.example.com.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// Latency-based resource record sets only: The Amazon EC2 Region where the
	// resource that is specified in this resource record set resides. The resource
	// typically is an AWS resource, such as an EC2 instance or an ELB load balancer,
	// and is referred to by an IP address or a DNS domain name, depending on the
	// record type.
	//
	// Creating latency and latency alias resource record sets in private hosted
	// zones is not supported.
	//
	// When Amazon Route 53 receives a DNS query for a domain name and type for
	// which you have created latency resource record sets, Amazon Route 53 selects
	// the latency resource record set that has the lowest latency between the end
	// user and the associated Amazon EC2 Region. Amazon Route 53 then returns the
	// value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	//    * You can only specify one ResourceRecord per latency resource record
	//    set.
	//
	//    * You can only create one latency resource record set for each Amazon
	//    EC2 Region.
	//
	//    * You are not required to create latency resource record sets for all
	//    Amazon EC2 Regions. Amazon Route 53 will choose the region with the best
	//    latency from among the regions for which you create latency resource record
	//    sets.
	//
	//    * You can't create non-latency resource record sets that have the same
	//    values for the Name and Type elements as latency resource record sets.
	Region *string `min:"1" type:"string" enum:"ResourceRecordSetRegion"`

	// Information about the resource records to act upon.
	//
	// If you are creating an alias resource record set, omit ResourceRecords.
	ResourceRecords []*ResourceRecord `locationNameList:"ResourceRecord" min:"1" type:"list"`

	// Weighted, Latency, Geo, and Failover resource record sets only: An identifier
	// that differentiates among multiple resource record sets that have the same
	// combination of DNS name and type. The value of SetIdentifier must be unique
	// for each resource record set that has the same combination of DNS name and
	// type. Omit SetIdentifier for any other types of record sets.
	SetIdentifier *string `min:"1" type:"string"`

	// The resource record cache time to live (TTL), in seconds. Note the following:
	//
	//    * If you're creating an alias resource record set, omit TTL. Amazon Route
	//    53 uses the value of TTL for the alias target.
	//
	//    * If you're associating this resource record set with a health check (if
	//    you're adding a HealthCheckId element), we recommend that you specify
	//    a TTL of 60 seconds or less so clients respond quickly to changes in health
	//    status.
	//
	//    * All of the resource record sets in a group of weighted, latency, geolocation,
	//    or failover resource record sets must have the same value for TTL.
	//
	//    * If a group of weighted resource record sets includes one or more weighted
	//    alias resource record sets for which the alias target is an ELB load balancer,
	//    we recommend that you specify a TTL of 60 seconds for all of the non-alias
	//    weighted resource record sets that have the same name and type. Values
	//    other than 60 seconds (the TTL for load balancers) will change the effect
	//    of the values that you specify for Weight.
	TTL *int64 `type:"long"`

	// When you create a traffic policy instance, Amazon Route 53 automatically
	// creates a resource record set. TrafficPolicyInstanceId is the ID of the traffic
	// policy instance that Amazon Route 53 created this resource record set for.
	//
	// To delete the resource record set that is associated with a traffic policy
	// instance, use DeleteTrafficPolicyInstance. Amazon Route 53 will delete the
	// resource record set automatically. If you delete the resource record set
	// by using ChangeResourceRecordSets, Amazon Route 53 doesn't automatically
	// delete the traffic policy instance, and you'll continue to be charged for
	// it even though it's no longer in use.
	TrafficPolicyInstanceId *string `type:"string"`

	// The DNS record type. For information about different record types and how
	// data is encoded for them, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// Valid values for basic resource record sets: A | AAAA | CNAME | MX | NAPTR
	// | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geolocation, and failover resource record sets:
	// A | AAAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT. When creating a group
	// of weighted, latency, geolocation, or failover resource record sets, specify
	// the same value for all of the resource record sets in the group.
	//
	// SPF records were formerly used to verify the identity of the sender of email
	// messages. However, we no longer recommend that you create resource record
	// sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework
	// (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated
	// to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to
	// some interoperability issues. Accordingly, its use is no longer appropriate
	// for SPF version 1; implementations are not to use it." In RFC 7208, see section
	// 14.1, The SPF DNS Record Type (http://tools.ietf.org/html/rfc7208#section-14.1).
	//
	// Values for alias resource record sets:
	//
	//    * CloudFront distributions:A
	//
	// If IPv6 is enabled for the distribution, create two resource record sets
	//    to route traffic to your distribution, one with a value of A and one with
	//    a value of AAAA.
	//
	//    * AWS Elastic Beanstalk environment that has a regionalized subdomain:
	//    A
	//
	//    * ELB load balancers:A | AAAA
	//
	//    * Amazon S3 buckets:A
	//
	//    * Another resource record set in this hosted zone: Specify the type of
	//    the resource record set for which you're creating the alias. Specify any
	//    value except NS or SOA.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`

	// Weighted resource record sets only: Among resource record sets that have
	// the same combination of DNS name and type, a value that determines the proportion
	// of DNS queries that Amazon Route 53 responds to using the current resource
	// record set. Amazon Route 53 calculates the sum of the weights for the resource
	// record sets that have the same combination of DNS name and type. Amazon Route
	// 53 then responds to queries based on the ratio of a resource's weight to
	// the total. Note the following:
	//
	//    * You must specify a value for the Weight element for every weighted resource
	//    record set.
	//
	//    * You can only specify one ResourceRecord per weighted resource record
	//    set.
	//
	//    * You can't create latency, failover, or geolocation resource record sets
	//    that have the same values for the Name and Type elements as weighted resource
	//    record sets.
	//
	//    * You can create a maximum of 100 weighted resource record sets that have
	//    the same values for the Name and Type elements.
	//
	//    * For weighted (but not weighted alias) resource record sets, if you set
	//    Weight to 0 for a resource record set, Amazon Route 53 never responds
	//    to queries with the applicable value for that resource record set. However,
	//    if you set Weight to 0 for all resource record sets that have the same
	//    combination of DNS name and type, traffic is routed to all resources with
	//    equal probability.
	//
	// The effect of setting Weight to 0 is different when you associate health
	//    checks with weighted resource record sets. For more information, see Options
	//    for Configuring Amazon Route 53 Active-Active and Active-Passive Failover
	//    (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html)
	//    in the Amazon Route 53 Developer Guide.
	Weight *int64 `type:"long"`
	// contains filtered or unexported fields
}

Information about the resource record set to create or delete.

func (ResourceRecordSet) GoString added in v0.6.5

func (s ResourceRecordSet) GoString() string

GoString returns the string representation

func (*ResourceRecordSet) SetAliasTarget added in v1.5.0

func (s *ResourceRecordSet) SetAliasTarget(v *AliasTarget) *ResourceRecordSet

SetAliasTarget sets the AliasTarget field's value.

func (*ResourceRecordSet) SetFailover added in v1.5.0

func (s *ResourceRecordSet) SetFailover(v string) *ResourceRecordSet

SetFailover sets the Failover field's value.

func (*ResourceRecordSet) SetGeoLocation added in v1.5.0

func (s *ResourceRecordSet) SetGeoLocation(v *GeoLocation) *ResourceRecordSet

SetGeoLocation sets the GeoLocation field's value.

func (*ResourceRecordSet) SetHealthCheckId added in v1.5.0

func (s *ResourceRecordSet) SetHealthCheckId(v string) *ResourceRecordSet

SetHealthCheckId sets the HealthCheckId field's value.

func (*ResourceRecordSet) SetName added in v1.5.0

SetName sets the Name field's value.

func (*ResourceRecordSet) SetRegion added in v1.5.0

func (s *ResourceRecordSet) SetRegion(v string) *ResourceRecordSet

SetRegion sets the Region field's value.

func (*ResourceRecordSet) SetResourceRecords added in v1.5.0

func (s *ResourceRecordSet) SetResourceRecords(v []*ResourceRecord) *ResourceRecordSet

SetResourceRecords sets the ResourceRecords field's value.

func (*ResourceRecordSet) SetSetIdentifier added in v1.5.0

func (s *ResourceRecordSet) SetSetIdentifier(v string) *ResourceRecordSet

SetSetIdentifier sets the SetIdentifier field's value.

func (*ResourceRecordSet) SetTTL added in v1.5.0

SetTTL sets the TTL field's value.

func (*ResourceRecordSet) SetTrafficPolicyInstanceId added in v1.5.0

func (s *ResourceRecordSet) SetTrafficPolicyInstanceId(v string) *ResourceRecordSet

SetTrafficPolicyInstanceId sets the TrafficPolicyInstanceId field's value.

func (*ResourceRecordSet) SetType added in v1.5.0

SetType sets the Type field's value.

func (*ResourceRecordSet) SetWeight added in v1.5.0

func (s *ResourceRecordSet) SetWeight(v int64) *ResourceRecordSet

SetWeight sets the Weight field's value.

func (ResourceRecordSet) String added in v0.6.5

func (s ResourceRecordSet) String() string

String returns the string representation

func (*ResourceRecordSet) Validate added in v1.1.21

func (s *ResourceRecordSet) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceTagSet

type ResourceTagSet struct {

	// The ID for the specified resource.
	ResourceId *string `type:"string"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	ResourceType *string `type:"string" enum:"TagResourceType"`

	// The tags associated with the specified resource.
	Tags []*Tag `locationNameList:"Tag" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type containing a resource and its associated tags.

func (ResourceTagSet) GoString added in v0.6.5

func (s ResourceTagSet) GoString() string

GoString returns the string representation

func (*ResourceTagSet) SetResourceId added in v1.5.0

func (s *ResourceTagSet) SetResourceId(v string) *ResourceTagSet

SetResourceId sets the ResourceId field's value.

func (*ResourceTagSet) SetResourceType added in v1.5.0

func (s *ResourceTagSet) SetResourceType(v string) *ResourceTagSet

SetResourceType sets the ResourceType field's value.

func (*ResourceTagSet) SetTags added in v1.5.0

func (s *ResourceTagSet) SetTags(v []*Tag) *ResourceTagSet

SetTags sets the Tags field's value.

func (ResourceTagSet) String added in v0.6.5

func (s ResourceTagSet) String() string

String returns the string representation

type Route53

type Route53 struct {
	*client.Client
}

Route53 is a client for Route 53. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Route53

New creates a new instance of the Route53 client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a Route53 client from just a session.
svc := route53.New(mySession)

// Create a Route53 client with additional configuration
svc := route53.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Route53) AssociateVPCWithHostedZone

func (c *Route53) AssociateVPCWithHostedZone(input *AssociateVPCWithHostedZoneInput) (*AssociateVPCWithHostedZoneOutput, error)

AssociateVPCWithHostedZone API operation for Amazon Route 53.

Associates an Amazon VPC with a private hosted zone.

To perform the association, the VPC and the private hosted zone must already exist. You can't convert a public hosted zone into a private hosted zone.

Send a POST request to the /2013-04-01/hostedzone/hosted zone ID/associatevpc resource. The request body must include a document with an AssociateVPCWithHostedZoneRequest element. The response contains a ChangeInfo data type that you can use to track the progress of the request.

If you want to associate a VPC that was created by using one AWS account with a private hosted zone that was created by using a different account, the AWS account that created the private hosted zone must first submit a CreateVPCAssociationAuthorization request. Then the account that created the VPC must submit an AssociateVPCWithHostedZone request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation AssociateVPCWithHostedZone for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • NotAuthorizedException Associating the specified VPC with the specified hosted zone has not been authorized.

  • InvalidVPCId The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • InvalidInput The input is not valid.

  • PublicZoneVPCAssociation You're trying to associate a VPC with a public hosted zone. Amazon Route 53 doesn't support associating a VPC with a public hosted zone.

  • ConflictingDomainExists You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.

  • LimitsExceeded The limits specified for a resource have been exceeded.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.AssociateVPCWithHostedZoneInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
		Comment: aws.String("AssociateVPCComment"),
	}
	resp, err := svc.AssociateVPCWithHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) AssociateVPCWithHostedZoneRequest

func (c *Route53) AssociateVPCWithHostedZoneRequest(input *AssociateVPCWithHostedZoneInput) (req *request.Request, output *AssociateVPCWithHostedZoneOutput)

AssociateVPCWithHostedZoneRequest generates a "aws/request.Request" representing the client's request for the AssociateVPCWithHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateVPCWithHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateVPCWithHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateVPCWithHostedZoneRequest method.
req, resp := client.AssociateVPCWithHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ChangeResourceRecordSets

func (c *Route53) ChangeResourceRecordSets(input *ChangeResourceRecordSetsInput) (*ChangeResourceRecordSetsOutput, error)

ChangeResourceRecordSets API operation for Amazon Route 53.

Create, change, update, or delete authoritative DNS information on all Amazon Route 53 servers. Send a POST request to:

/2013-04-01/hostedzone/Amazon Route 53 hosted Zone ID/rrset resource.

The request body must include a document with a ChangeResourceRecordSetsRequest element. The request body contains a list of change items, known as a change batch. Change batches are considered transactional changes. When using the Amazon Route 53 API to change resource record sets, Amazon Route 53 either makes all or none of the changes in a change batch request. This ensures that Amazon Route 53 never partially implements the intended changes to the resource record sets in a hosted zone.

For example, a change batch request that deletes the CNAME record for www.example.com and creates an alias resource record set for www.example.com. Amazon Route 53 deletes the first resource record set and creates the second resource record set in a single operation. If either the DELETE or the CREATE action fails, then both changes (plus any other changes in the batch) fail, and the original CNAME record continues to exist.

Due to the nature of transactional changes, you can't delete the same resource record set more than once in a single change batch. If you attempt to delete the same change batch more than once, Amazon Route 53 returns an InvalidChangeBatch error.

To create resource record sets for complex routing configurations, use either the traffic flow visual editor in the Amazon Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route DNS Traffic (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/traffic-flow.html) in the Amazon Route 53 Developer Guide.

Use ChangeResourceRecordsSetsRequest to perform the following actions:

  • CREATE: Creates a resource record set that has the specified values.

  • DELETE: Deletes an existing resource record set that has the specified values.

  • UPSERT: If a resource record set does not already exist, AWS creates it. If a resource set does exist, Amazon Route 53 updates it with the values in the request.

The values that you need to include in the request depend on the type of resource record set that you're creating, deleting, or updating:

Basic resource record sets (excluding alias, failover, geolocation, latency, and weighted resource record sets)

  • Name

  • Type

  • TTL

Failover, geolocation, latency, or weighted resource record sets (excluding alias resource record sets)

  • Name

  • Type

  • TTL

  • SetIdentifier

Alias resource record sets (including failover alias, geolocation alias, latency alias, and weighted alias resource record sets)

  • Name

  • Type

  • AliasTarget (includes DNSName, EvaluateTargetHealth, and HostedZoneId)

  • SetIdentifier (for failover, geolocation, latency, and weighted resource record sets)

When you submit a ChangeResourceRecordSets request, Amazon Route 53 propagates your changes to all of the Amazon Route 53 authoritative DNS servers. While your changes are propagating, GetChange returns a status of PENDING. When propagation is complete, GetChange returns a status of INSYNC. Changes generally propagate to all Amazon Route 53 name servers in a few minutes. In rare circumstances, propagation can take up to 30 minutes. For more information, see GetChange

For information about the limits on a ChangeResourceRecordSets request, see Limits (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ChangeResourceRecordSets for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • InvalidChangeBatch This exception contains a list of messages that might contain one or more error messages. Each error message indicates one error in the change batch.

  • InvalidInput The input is not valid.

  • PriorRequestNotComplete If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{ // Required
			Changes: []*route53.Change{ // Required
				{ // Required
					Action: aws.String("ChangeAction"), // Required
					ResourceRecordSet: &route53.ResourceRecordSet{ // Required
						Name: aws.String("DNSName"), // Required
						Type: aws.String("RRType"),  // Required
						AliasTarget: &route53.AliasTarget{
							DNSName:              aws.String("DNSName"),    // Required
							EvaluateTargetHealth: aws.Bool(true),           // Required
							HostedZoneId:         aws.String("ResourceId"), // Required
						},
						Failover: aws.String("ResourceRecordSetFailover"),
						GeoLocation: &route53.GeoLocation{
							ContinentCode:   aws.String("GeoLocationContinentCode"),
							CountryCode:     aws.String("GeoLocationCountryCode"),
							SubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
						},
						HealthCheckId: aws.String("HealthCheckId"),
						Region:        aws.String("ResourceRecordSetRegion"),
						ResourceRecords: []*route53.ResourceRecord{
							{ // Required
								Value: aws.String("RData"), // Required
							},
							// More values...
						},
						SetIdentifier:           aws.String("ResourceRecordSetIdentifier"),
						TTL:                     aws.Int64(1),
						TrafficPolicyInstanceId: aws.String("TrafficPolicyInstanceId"),
						Weight:                  aws.Int64(1),
					},
				},
				// More values...
			},
			Comment: aws.String("ResourceDescription"),
		},
		HostedZoneId: aws.String("ResourceId"), // Required
	}
	resp, err := svc.ChangeResourceRecordSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ChangeResourceRecordSetsRequest

func (c *Route53) ChangeResourceRecordSetsRequest(input *ChangeResourceRecordSetsInput) (req *request.Request, output *ChangeResourceRecordSetsOutput)

ChangeResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ChangeResourceRecordSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ChangeResourceRecordSets for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ChangeResourceRecordSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ChangeResourceRecordSetsRequest method.
req, resp := client.ChangeResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ChangeTagsForResource

func (c *Route53) ChangeTagsForResource(input *ChangeTagsForResourceInput) (*ChangeTagsForResourceOutput, error)
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ChangeTagsForResourceInput{
		ResourceId:   aws.String("TagResourceId"),   // Required
		ResourceType: aws.String("TagResourceType"), // Required
		AddTags: []*route53.Tag{
			{ // Required
				Key:   aws.String("TagKey"),
				Value: aws.String("TagValue"),
			},
			// More values...
		},
		RemoveTagKeys: []*string{
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.ChangeTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ChangeTagsForResourceRequest

func (c *Route53) ChangeTagsForResourceRequest(input *ChangeTagsForResourceInput) (req *request.Request, output *ChangeTagsForResourceOutput)

ChangeTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ChangeTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ChangeTagsForResource for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ChangeTagsForResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ChangeTagsForResourceRequest method.
req, resp := client.ChangeTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateHealthCheck

func (c *Route53) CreateHealthCheck(input *CreateHealthCheckInput) (*CreateHealthCheckOutput, error)

CreateHealthCheck API operation for Amazon Route 53.

Creates a new health check.

To create a new health check, send a POST request to the /2013-04-01/healthcheck resource. The request body must include a document with a CreateHealthCheckRequest element. The response returns the CreateHealthCheckResponse element, containing the health check ID specified when adding health check to a resource record set. For information about adding health checks to resource record sets, see ResourceRecordSet$HealthCheckId in ChangeResourceRecordSets.

If you are registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to an Amazon Route 53 health check.

You can associate health checks with failover resource record sets in a private hosted zone. Note the following:

  • Amazon Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC.

  • You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server.

  • You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the Amazon CloudWatch User Guide (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateHealthCheck for usage and error information.

Returned Error Codes:

  • TooManyHealthChecks You have reached the maximum number of active health checks for an AWS account. The default limit is 100. To request a higher limit, create a case (http://aws.amazon.com/route53-request) with the AWS Support Center.

  • HealthCheckAlreadyExists The health check you're attempting to create already exists.

    Amazon Route 53 returns this error when a health check has already been created with the specified value for CallerReference.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateHealthCheckInput{
		CallerReference: aws.String("HealthCheckNonce"), // Required
		HealthCheckConfig: &route53.HealthCheckConfig{ // Required
			Type: aws.String("HealthCheckType"), // Required
			AlarmIdentifier: &route53.AlarmIdentifier{
				Name:   aws.String("AlarmName"),        // Required
				Region: aws.String("CloudWatchRegion"), // Required
			},
			ChildHealthChecks: []*string{
				aws.String("HealthCheckId"), // Required
				// More values...
			},
			EnableSNI:                    aws.Bool(true),
			FailureThreshold:             aws.Int64(1),
			FullyQualifiedDomainName:     aws.String("FullyQualifiedDomainName"),
			HealthThreshold:              aws.Int64(1),
			IPAddress:                    aws.String("IPAddress"),
			InsufficientDataHealthStatus: aws.String("InsufficientDataHealthStatus"),
			Inverted:                     aws.Bool(true),
			MeasureLatency:               aws.Bool(true),
			Port:                         aws.Int64(1),
			Regions: []*string{
				aws.String("HealthCheckRegion"), // Required
				// More values...
			},
			RequestInterval: aws.Int64(1),
			ResourcePath:    aws.String("ResourcePath"),
			SearchString:    aws.String("SearchString"),
		},
	}
	resp, err := svc.CreateHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateHealthCheckRequest

func (c *Route53) CreateHealthCheckRequest(input *CreateHealthCheckInput) (req *request.Request, output *CreateHealthCheckOutput)

CreateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the CreateHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateHealthCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateHealthCheckRequest method.
req, resp := client.CreateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateHostedZone

func (c *Route53) CreateHostedZone(input *CreateHostedZoneInput) (*CreateHostedZoneOutput, error)

CreateHostedZone API operation for Amazon Route 53.

Creates a new public hosted zone, used to specify how the Domain Name System (DNS) routes traffic on the Internet for a domain, such as example.com, and its subdomains.

Public hosted zones can't be converted to a private hosted zone or vice versa. Instead, create a new hosted zone with the same name and create new resource record sets.

Send a POST request to the /2013-04-01/hostedzone resource. The request body must include a document with a CreateHostedZoneRequest element. The response returns the CreateHostedZoneResponse element containing metadata about the hosted zone.

Fore more information about charges for hosted zones, see Amazon Route 53 Pricing (http://aws.amazon.com/route53/pricing/).

Note the following:

After creating a zone, its initial status is PENDING. This means that it is not yet available on all DNS servers. The status of the zone changes to INSYNC when the NS and SOA records are available on all Amazon Route 53 DNS servers.

When trying to create a hosted zone using a reusable delegation set, specify an optional DelegationSetId, and Amazon Route 53 would assign those 4 NS records for the zone, instead of allotting a new one.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateHostedZone for usage and error information.

Returned Error Codes:

  • InvalidDomainName The specified domain name is not valid.

  • HostedZoneAlreadyExists The hosted zone you are trying to create already exists. Amazon Route 53 returns this error when a hosted zone has already been created with the specified CallerReference.

  • TooManyHostedZones This hosted zone can't be created because the hosted zone limit is exceeded. To request a limit increase, go to the Amazon Route 53 Contact Us (http://aws.amazon.com/route53-request/) page.

  • InvalidVPCId The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • InvalidInput The input is not valid.

  • DelegationSetNotAvailable You can create a hosted zone that has the same name as an existing hosted zone (example.com is common), but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon Route 53 has reached that limit. If you own the domain name and Amazon Route 53 generates this error, contact Customer Support.

  • ConflictingDomainExists You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.

  • NoSuchDelegationSet A reusable delegation set with the specified ID does not exist.

  • DelegationSetNotReusable A reusable delegation set with the specified ID does not exist.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateHostedZoneInput{
		CallerReference: aws.String("Nonce"),   // Required
		Name:            aws.String("DNSName"), // Required
		DelegationSetId: aws.String("ResourceId"),
		HostedZoneConfig: &route53.HostedZoneConfig{
			Comment:     aws.String("ResourceDescription"),
			PrivateZone: aws.Bool(true),
		},
		VPC: &route53.VPC{
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
	}
	resp, err := svc.CreateHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateHostedZoneRequest

func (c *Route53) CreateHostedZoneRequest(input *CreateHostedZoneInput) (req *request.Request, output *CreateHostedZoneOutput)

CreateHostedZoneRequest generates a "aws/request.Request" representing the client's request for the CreateHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateHostedZoneRequest method.
req, resp := client.CreateHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateReusableDelegationSet

func (c *Route53) CreateReusableDelegationSet(input *CreateReusableDelegationSetInput) (*CreateReusableDelegationSetOutput, error)

CreateReusableDelegationSet API operation for Amazon Route 53.

Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones. If a hosted zoned ID is specified, CreateReusableDelegationSet marks the delegation set associated with that zone as reusable

Send a POST request to the /2013-04-01/delegationset resource. The request body must include a document with a CreateReusableDelegationSetRequest element.

A reusable delegation set can't be associated with a private hosted zone/

For more information, including a procedure on how to create and configure a reusable delegation set (also known as white label name servers), see Configuring White Label Name Servers (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/white-label-name-servers.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateReusableDelegationSet for usage and error information.

Returned Error Codes:

  • DelegationSetAlreadyCreated A delegation set with the same owner and caller reference combination has already been created.

  • LimitsExceeded The limits specified for a resource have been exceeded.

  • HostedZoneNotFound The specified HostedZone can't be found.

  • InvalidArgument Parameter name and problem.

  • InvalidInput The input is not valid.

  • DelegationSetNotAvailable You can create a hosted zone that has the same name as an existing hosted zone (example.com is common), but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon Route 53 has reached that limit. If you own the domain name and Amazon Route 53 generates this error, contact Customer Support.

  • DelegationSetAlreadyReusable The specified delegation set has already been marked as reusable.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateReusableDelegationSetInput{
		CallerReference: aws.String("Nonce"), // Required
		HostedZoneId:    aws.String("ResourceId"),
	}
	resp, err := svc.CreateReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateReusableDelegationSetRequest

func (c *Route53) CreateReusableDelegationSetRequest(input *CreateReusableDelegationSetInput) (req *request.Request, output *CreateReusableDelegationSetOutput)

CreateReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the CreateReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateReusableDelegationSet for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateReusableDelegationSetRequest method.
req, resp := client.CreateReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicy added in v1.0.3

func (c *Route53) CreateTrafficPolicy(input *CreateTrafficPolicyInput) (*CreateTrafficPolicyOutput, error)

CreateTrafficPolicy API operation for Amazon Route 53.

Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com).

Send a POST request to the /2013-04-01/trafficpolicy resource. The request body must include a document with a CreateTrafficPolicyRequest element. The response includes the CreateTrafficPolicyResponse element, which contains information about the new traffic policy.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicy for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • TooManyTrafficPolicies You've created the maximum number of traffic policies that can be created for the current AWS account. You can request an increase to the limit on the Contact Us (http://aws.amazon.com/route53-request/) page.

  • TrafficPolicyAlreadyExists A traffic policy that has the same value for Name already exists.

  • InvalidTrafficPolicyDocument The format of the traffic policy document that you specified in the Document element is invalid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyInput{
		Document: aws.String("TrafficPolicyDocument"), // Required
		Name:     aws.String("TrafficPolicyName"),     // Required
		Comment:  aws.String("TrafficPolicyComment"),
	}
	resp, err := svc.CreateTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateTrafficPolicyInstance added in v1.0.3

func (c *Route53) CreateTrafficPolicyInstance(input *CreateTrafficPolicyInstanceInput) (*CreateTrafficPolicyInstanceOutput, error)

CreateTrafficPolicyInstance API operation for Amazon Route 53.

Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds to DNS queries for the domain or subdomain name by using the resource record sets that CreateTrafficPolicyInstance created.

Send a POST request to the /2013-04-01/trafficpolicyinstance resource. The request body must include a document with a CreateTrafficPolicyRequest element. The response returns the CreateTrafficPolicyInstanceResponse element, which contains information about the traffic policy instance.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidInput The input is not valid.

  • TooManyTrafficPolicyInstances You've created the maximum number of traffic policy instances that can be created for the current AWS account. You can request an increase to the limit on the Contact Us (http://aws.amazon.com/route53-request/) page.

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • TrafficPolicyInstanceAlreadyExists Traffic policy instance with given Id already exists.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyInstanceInput{
		HostedZoneId:         aws.String("ResourceId"),      // Required
		Name:                 aws.String("DNSName"),         // Required
		TTL:                  aws.Int64(1),                  // Required
		TrafficPolicyId:      aws.String("TrafficPolicyId"), // Required
		TrafficPolicyVersion: aws.Int64(1),                  // Required
	}
	resp, err := svc.CreateTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateTrafficPolicyInstanceRequest added in v1.0.3

func (c *Route53) CreateTrafficPolicyInstanceRequest(input *CreateTrafficPolicyInstanceInput) (req *request.Request, output *CreateTrafficPolicyInstanceOutput)

CreateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateTrafficPolicyInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateTrafficPolicyInstanceRequest method.
req, resp := client.CreateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicyRequest added in v1.0.3

func (c *Route53) CreateTrafficPolicyRequest(input *CreateTrafficPolicyInput) (req *request.Request, output *CreateTrafficPolicyOutput)

CreateTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateTrafficPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateTrafficPolicyRequest method.
req, resp := client.CreateTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicyVersion added in v1.0.3

func (c *Route53) CreateTrafficPolicyVersion(input *CreateTrafficPolicyVersionInput) (*CreateTrafficPolicyVersionOutput, error)

CreateTrafficPolicyVersion API operation for Amazon Route 53.

Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic policy.

Send a POST request to the /2013-04-01/trafficpolicy/ resource. The request body includes a document with a CreateTrafficPolicyVersionRequest element. The response returns the CreateTrafficPolicyVersionResponse element, which contains information about the new version of the traffic policy.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicyVersion for usage and error information.

Returned Error Codes:

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • InvalidInput The input is not valid.

  • ConcurrentModification Another user submitted a request to update the object at the same time that you did. Retry the request.

  • InvalidTrafficPolicyDocument The format of the traffic policy document that you specified in the Document element is invalid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyVersionInput{
		Document: aws.String("TrafficPolicyDocument"), // Required
		Id:       aws.String("TrafficPolicyId"),       // Required
		Comment:  aws.String("TrafficPolicyComment"),
	}
	resp, err := svc.CreateTrafficPolicyVersion(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateTrafficPolicyVersionRequest added in v1.0.3

func (c *Route53) CreateTrafficPolicyVersionRequest(input *CreateTrafficPolicyVersionInput) (req *request.Request, output *CreateTrafficPolicyVersionOutput)

CreateTrafficPolicyVersionRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyVersion operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateTrafficPolicyVersion for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicyVersion method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateTrafficPolicyVersionRequest method.
req, resp := client.CreateTrafficPolicyVersionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateVPCAssociationAuthorization added in v1.5.6

func (c *Route53) CreateVPCAssociationAuthorization(input *CreateVPCAssociationAuthorizationInput) (*CreateVPCAssociationAuthorizationOutput, error)

CreateVPCAssociationAuthorization API operation for Amazon Route 53.

Authorizes the AWS account that created a specified VPC to submit an AssociateVPCWithHostedZone request to associate the VPC with a specified hosted zone that was created by a different account. To submit a CreateVPCAssociationAuthorization request, you must use the account that created the hosted zone. After you authorize the association, use the account that created the VPC to submit an AssociateVPCWithHostedZone request.

If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created by using a different account, you must submit one authorization request for each VPC.

Send a POST request to the /2013-04-01/hostedzone/hosted zone ID/authorizevpcassociation resource. The request body must include a document with a CreateVPCAssociationAuthorizationRequest element. The response contains information about the authorization.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateVPCAssociationAuthorization for usage and error information.

Returned Error Codes:

  • TooManyVPCAssociationAuthorizations You've created the maximum number of authorizations that can be created for the specified hosted zone. To authorize another VPC to be associated with the hosted zone, submit a DeleteVPCAssociationAuthorization request to remove an existing authorization. To get a list of existing authorizations, submit a ListVPCAssociationAuthorizations request.

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidVPCId The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateVPCAssociationAuthorizationInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
	}
	resp, err := svc.CreateVPCAssociationAuthorization(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) CreateVPCAssociationAuthorizationRequest added in v1.5.6

func (c *Route53) CreateVPCAssociationAuthorizationRequest(input *CreateVPCAssociationAuthorizationInput) (req *request.Request, output *CreateVPCAssociationAuthorizationOutput)

CreateVPCAssociationAuthorizationRequest generates a "aws/request.Request" representing the client's request for the CreateVPCAssociationAuthorization operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateVPCAssociationAuthorization for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVPCAssociationAuthorization method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateVPCAssociationAuthorizationRequest method.
req, resp := client.CreateVPCAssociationAuthorizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteHealthCheck

func (c *Route53) DeleteHealthCheck(input *DeleteHealthCheckInput) (*DeleteHealthCheckOutput, error)

DeleteHealthCheck API operation for Amazon Route 53.

Deletes a health check. Send a DELETE request to the /2013-04-01/healthcheck/health check ID resource.

Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one or more resource record sets. If you delete a health check and you don't update the associated resource record sets, the future status of the health check can't be predicted and may change. This will affect the routing of DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html#health-checks-deleting.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteHealthCheck for usage and error information.

Returned Error Codes:

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • HealthCheckInUse The health check ID for this health check is referenced in the HealthCheckId element in one of the resource record sets in one of the hosted zones that are owned by the current AWS account.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.DeleteHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteHealthCheckRequest

func (c *Route53) DeleteHealthCheckRequest(input *DeleteHealthCheckInput) (req *request.Request, output *DeleteHealthCheckOutput)

DeleteHealthCheckRequest generates a "aws/request.Request" representing the client's request for the DeleteHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteHealthCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteHealthCheckRequest method.
req, resp := client.DeleteHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteHostedZone

func (c *Route53) DeleteHostedZone(input *DeleteHostedZoneInput) (*DeleteHostedZoneOutput, error)

DeleteHostedZone API operation for Amazon Route 53.

Deletes a hosted zone. Send a DELETE request to the /Amazon Route 53 API version/hostedzone/hosted zone ID resource.

Delete a hosted zone only if there are no resource record sets other than the default SOA record and NS resource record sets. If the hosted zone contains other resource record sets, delete them before deleting the hosted zone. If you try to delete a hosted zone that contains other resource record sets, Amazon Route 53 denies your request with a HostedZoneNotEmpty error. For information about deleting records from your hosted zone, see ChangeResourceRecordSets.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteHostedZone for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • HostedZoneNotEmpty The hosted zone contains resource records that are not SOA or NS records.

  • PriorRequestNotComplete If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • InvalidInput The input is not valid.

  • InvalidDomainName The specified domain name is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteHostedZoneInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.DeleteHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteHostedZoneRequest

func (c *Route53) DeleteHostedZoneRequest(input *DeleteHostedZoneInput) (req *request.Request, output *DeleteHostedZoneOutput)

DeleteHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DeleteHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteHostedZoneRequest method.
req, resp := client.DeleteHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteReusableDelegationSet

func (c *Route53) DeleteReusableDelegationSet(input *DeleteReusableDelegationSetInput) (*DeleteReusableDelegationSetOutput, error)

DeleteReusableDelegationSet API operation for Amazon Route 53.

Deletes a reusable delegation set. Send a DELETE request to the /2013-04-01/delegationset/delegation set ID resource.

You can delete a reusable delegation set only if there are no associated hosted zones.

To verify that the reusable delegation set is not associated with any hosted zones, run the GetReusableDelegationSet action and specify the ID of the reusable delegation set that you want to delete.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteReusableDelegationSet for usage and error information.

Returned Error Codes:

  • NoSuchDelegationSet A reusable delegation set with the specified ID does not exist.

  • DelegationSetInUse The specified delegation contains associated hosted zones which must be deleted before the reusable delegation set can be deleted.

  • DelegationSetNotReusable A reusable delegation set with the specified ID does not exist.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteReusableDelegationSetInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.DeleteReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteReusableDelegationSetRequest

func (c *Route53) DeleteReusableDelegationSetRequest(input *DeleteReusableDelegationSetInput) (req *request.Request, output *DeleteReusableDelegationSetOutput)

DeleteReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the DeleteReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteReusableDelegationSet for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteReusableDelegationSetRequest method.
req, resp := client.DeleteReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteTrafficPolicy added in v1.0.3

func (c *Route53) DeleteTrafficPolicy(input *DeleteTrafficPolicyInput) (*DeleteTrafficPolicyOutput, error)

DeleteTrafficPolicy API operation for Amazon Route 53.

Deletes a traffic policy.

Send a DELETE request to the /Amazon Route 53 API version/trafficpolicy resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteTrafficPolicy for usage and error information.

Returned Error Codes:

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • InvalidInput The input is not valid.

  • TrafficPolicyInUse One or more traffic policy instances were created by using the specified traffic policy.

  • ConcurrentModification Another user submitted a request to update the object at the same time that you did. Retry the request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteTrafficPolicyInput{
		Id:      aws.String("TrafficPolicyId"), // Required
		Version: aws.Int64(1),                  // Required
	}
	resp, err := svc.DeleteTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteTrafficPolicyInstance added in v1.0.3

func (c *Route53) DeleteTrafficPolicyInstance(input *DeleteTrafficPolicyInstanceInput) (*DeleteTrafficPolicyInstanceOutput, error)

DeleteTrafficPolicyInstance API operation for Amazon Route 53.

Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you created the instance.

Send a DELETE request to the /Amazon Route 53 API version/trafficpolicy/traffic policy instance ID resource.

In the Amazon Route 53 console, traffic policy instances are known as policy records.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

  • InvalidInput The input is not valid.

  • PriorRequestNotComplete If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteTrafficPolicyInstanceInput{
		Id: aws.String("TrafficPolicyInstanceId"), // Required
	}
	resp, err := svc.DeleteTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteTrafficPolicyInstanceRequest added in v1.0.3

func (c *Route53) DeleteTrafficPolicyInstanceRequest(input *DeleteTrafficPolicyInstanceInput) (req *request.Request, output *DeleteTrafficPolicyInstanceOutput)

DeleteTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteTrafficPolicyInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteTrafficPolicyInstanceRequest method.
req, resp := client.DeleteTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteTrafficPolicyRequest added in v1.0.3

func (c *Route53) DeleteTrafficPolicyRequest(input *DeleteTrafficPolicyInput) (req *request.Request, output *DeleteTrafficPolicyOutput)

DeleteTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteTrafficPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteTrafficPolicyRequest method.
req, resp := client.DeleteTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteVPCAssociationAuthorization added in v1.5.6

func (c *Route53) DeleteVPCAssociationAuthorization(input *DeleteVPCAssociationAuthorizationInput) (*DeleteVPCAssociationAuthorizationOutput, error)

DeleteVPCAssociationAuthorization API operation for Amazon Route 53.

Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC with a hosted zone that was created by a different account. You must use the account that created the hosted zone to submit a DeleteVPCAssociationAuthorization request.

Sending this request only prevents the AWS account that created the VPC from associating the VPC with the Amazon Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone, DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to delete an existing association, use DisassociateVPCFromHostedZone.

Send a DELETE request to the /2013-04-01/hostedzone/hosted zone ID/deauthorizevpcassociation resource. The request body must include a document with a DeleteVPCAssociationAuthorizationRequest element.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteVPCAssociationAuthorization for usage and error information.

Returned Error Codes:

  • VPCAssociationAuthorizationNotFound The VPC that you specified is not authorized to be associated with the hosted zone.

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidVPCId The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteVPCAssociationAuthorizationInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
	}
	resp, err := svc.DeleteVPCAssociationAuthorization(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DeleteVPCAssociationAuthorizationRequest added in v1.5.6

func (c *Route53) DeleteVPCAssociationAuthorizationRequest(input *DeleteVPCAssociationAuthorizationInput) (req *request.Request, output *DeleteVPCAssociationAuthorizationOutput)

DeleteVPCAssociationAuthorizationRequest generates a "aws/request.Request" representing the client's request for the DeleteVPCAssociationAuthorization operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteVPCAssociationAuthorization for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVPCAssociationAuthorization method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteVPCAssociationAuthorizationRequest method.
req, resp := client.DeleteVPCAssociationAuthorizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DisassociateVPCFromHostedZone

func (c *Route53) DisassociateVPCFromHostedZone(input *DisassociateVPCFromHostedZoneInput) (*DisassociateVPCFromHostedZoneOutput, error)

DisassociateVPCFromHostedZone API operation for Amazon Route 53.

Disassociates a VPC from a Amazon Route 53 private hosted zone.

You can't disassociate the last VPC from a private hosted zone.

Send a POST request to the /2013-04-01/hostedzone/hosted zone ID/disassociatevpc resource. The request body must include a document with a DisassociateVPCFromHostedZoneRequest element. The response includes a DisassociateVPCFromHostedZoneResponse element.

You can't disassociate a VPC from a private hosted zone when only one VPC is associated with the hosted zone. You also can't convert a private hosted zone into a public hosted zone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DisassociateVPCFromHostedZone for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidVPCId The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • VPCAssociationNotFound The specified VPC and hosted zone are not currently associated.

  • LastVPCAssociation The VPC that you're trying to disassociate from the private hosted zone is the last VPC that is associated with the hosted zone. Amazon Route 53 doesn't support disassociating the last VPC from a hosted zone.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DisassociateVPCFromHostedZoneInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
		Comment: aws.String("DisassociateVPCComment"),
	}
	resp, err := svc.DisassociateVPCFromHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) DisassociateVPCFromHostedZoneRequest

func (c *Route53) DisassociateVPCFromHostedZoneRequest(input *DisassociateVPCFromHostedZoneInput) (req *request.Request, output *DisassociateVPCFromHostedZoneOutput)

DisassociateVPCFromHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DisassociateVPCFromHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DisassociateVPCFromHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateVPCFromHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DisassociateVPCFromHostedZoneRequest method.
req, resp := client.DisassociateVPCFromHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetChange

func (c *Route53) GetChange(input *GetChangeInput) (*GetChangeOutput, error)

GetChange API operation for Amazon Route 53.

Returns the current status of a change batch request. The status is one of the following values:

  • PENDING indicates that the changes in this request have not replicated to all Amazon Route 53 DNS servers. This is the initial status of all change batch requests.

  • INSYNC indicates that the changes have replicated to all Amazon Route 53 DNS servers.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetChange for usage and error information.

Returned Error Codes:

  • NoSuchChange A change with the specified change ID does not exist.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetChangeInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetChange(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetChangeRequest

func (c *Route53) GetChangeRequest(input *GetChangeInput) (req *request.Request, output *GetChangeOutput)

GetChangeRequest generates a "aws/request.Request" representing the client's request for the GetChange operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetChange for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetChange method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetChangeRequest method.
req, resp := client.GetChangeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetCheckerIpRanges added in v0.9.5

func (c *Route53) GetCheckerIpRanges(input *GetCheckerIpRangesInput) (*GetCheckerIpRangesOutput, error)

GetCheckerIpRanges API operation for Amazon Route 53.

Retrieves a list of the IP ranges used by Amazon Route 53 health checkers to check the health of your resources. Send a GET request to the /Amazon Route 53 API version/checkeripranges resource. Use these IP addresses to configure router and firewall rules to allow health checkers to check the health of your resources.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetCheckerIpRanges for usage and error information.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetCheckerIpRangesInput
	resp, err := svc.GetCheckerIpRanges(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetCheckerIpRangesRequest added in v0.9.5

func (c *Route53) GetCheckerIpRangesRequest(input *GetCheckerIpRangesInput) (req *request.Request, output *GetCheckerIpRangesOutput)

GetCheckerIpRangesRequest generates a "aws/request.Request" representing the client's request for the GetCheckerIpRanges operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetCheckerIpRanges for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetCheckerIpRanges method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetCheckerIpRangesRequest method.
req, resp := client.GetCheckerIpRangesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetGeoLocation

func (c *Route53) GetGeoLocation(input *GetGeoLocationInput) (*GetGeoLocationOutput, error)

GetGeoLocation API operation for Amazon Route 53.

Retrieves a single geo location. Send a GET request to the /2013-04-01/geolocation resource with one of these options: continentcode | countrycode | countrycode and subdivisioncode.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetGeoLocation for usage and error information.

Returned Error Codes:

  • NoSuchGeoLocation Amazon Route 53 doesn't support the specified geolocation.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetGeoLocationInput{
		ContinentCode:   aws.String("GeoLocationContinentCode"),
		CountryCode:     aws.String("GeoLocationCountryCode"),
		SubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
	}
	resp, err := svc.GetGeoLocation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetGeoLocationRequest

func (c *Route53) GetGeoLocationRequest(input *GetGeoLocationInput) (req *request.Request, output *GetGeoLocationOutput)

GetGeoLocationRequest generates a "aws/request.Request" representing the client's request for the GetGeoLocation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetGeoLocation for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetGeoLocation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetGeoLocationRequest method.
req, resp := client.GetGeoLocationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheck

func (c *Route53) GetHealthCheck(input *GetHealthCheckInput) (*GetHealthCheckOutput, error)

GetHealthCheck API operation for Amazon Route 53.

Gets information about a specified health check. Send a GET request to the /2013-04-01/healthcheck/health check ID resource. For more information about using the console to perform this operation, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheck for usage and error information.

Returned Error Codes:

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • InvalidInput The input is not valid.

  • IncompatibleVersion The resource you are trying to access is unsupported on this Amazon Route 53 endpoint. Please consider using a newer endpoint or a tool that does so.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHealthCheckCount

func (c *Route53) GetHealthCheckCount(input *GetHealthCheckCountInput) (*GetHealthCheckCountOutput, error)

GetHealthCheckCount API operation for Amazon Route 53.

To retrieve a count of all your health checks, send a GET request to the /2013-04-01/healthcheckcount resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckCount for usage and error information.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetHealthCheckCountInput
	resp, err := svc.GetHealthCheckCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHealthCheckCountRequest

func (c *Route53) GetHealthCheckCountRequest(input *GetHealthCheckCountInput) (req *request.Request, output *GetHealthCheckCountOutput)

GetHealthCheckCountRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHealthCheckCount for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHealthCheckCountRequest method.
req, resp := client.GetHealthCheckCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckLastFailureReason

func (c *Route53) GetHealthCheckLastFailureReason(input *GetHealthCheckLastFailureReasonInput) (*GetHealthCheckLastFailureReasonOutput, error)

GetHealthCheckLastFailureReason API operation for Amazon Route 53.

If you want to learn why a health check is currently failing or why it failed most recently (if at all), you can get the failure reason for the most recent failure. Send a GET request to the /Amazon Route 53 API version/healthcheck/health check ID/lastfailurereason resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckLastFailureReason for usage and error information.

Returned Error Codes:

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckLastFailureReasonInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheckLastFailureReason(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHealthCheckLastFailureReasonRequest

func (c *Route53) GetHealthCheckLastFailureReasonRequest(input *GetHealthCheckLastFailureReasonInput) (req *request.Request, output *GetHealthCheckLastFailureReasonOutput)

GetHealthCheckLastFailureReasonRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckLastFailureReason operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHealthCheckLastFailureReason for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckLastFailureReason method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHealthCheckLastFailureReasonRequest method.
req, resp := client.GetHealthCheckLastFailureReasonRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckRequest

func (c *Route53) GetHealthCheckRequest(input *GetHealthCheckInput) (req *request.Request, output *GetHealthCheckOutput)

GetHealthCheckRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHealthCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHealthCheckRequest method.
req, resp := client.GetHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckStatus

func (c *Route53) GetHealthCheckStatus(input *GetHealthCheckStatusInput) (*GetHealthCheckStatusOutput, error)

GetHealthCheckStatus API operation for Amazon Route 53.

Gets status of a specified health check. Send a GET request to the /2013-04-01/healthcheck/health check ID/status resource. You can use this call to get a health check's current status.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckStatus for usage and error information.

Returned Error Codes:

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckStatusInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheckStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHealthCheckStatusRequest

func (c *Route53) GetHealthCheckStatusRequest(input *GetHealthCheckStatusInput) (req *request.Request, output *GetHealthCheckStatusOutput)

GetHealthCheckStatusRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHealthCheckStatus for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHealthCheckStatusRequest method.
req, resp := client.GetHealthCheckStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHostedZone

func (c *Route53) GetHostedZone(input *GetHostedZoneInput) (*GetHostedZoneOutput, error)

GetHostedZone API operation for Amazon Route 53.

Retrieves the delegation set for a hosted zone, including the four name servers assigned to the hosted zone. Send a GET request to the /Amazon Route 53 API version/hostedzone/hosted zone ID resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHostedZone for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHostedZoneInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHostedZoneCount

func (c *Route53) GetHostedZoneCount(input *GetHostedZoneCountInput) (*GetHostedZoneCountOutput, error)

GetHostedZoneCount API operation for Amazon Route 53.

Retrieves a count of all your hosted zones. Send a GET request to the /2013-04-01/hostedzonecount resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHostedZoneCount for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetHostedZoneCountInput
	resp, err := svc.GetHostedZoneCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetHostedZoneCountRequest

func (c *Route53) GetHostedZoneCountRequest(input *GetHostedZoneCountInput) (req *request.Request, output *GetHostedZoneCountOutput)

GetHostedZoneCountRequest generates a "aws/request.Request" representing the client's request for the GetHostedZoneCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHostedZoneCount for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHostedZoneCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHostedZoneCountRequest method.
req, resp := client.GetHostedZoneCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHostedZoneRequest

func (c *Route53) GetHostedZoneRequest(input *GetHostedZoneInput) (req *request.Request, output *GetHostedZoneOutput)

GetHostedZoneRequest generates a "aws/request.Request" representing the client's request for the GetHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetHostedZoneRequest method.
req, resp := client.GetHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetReusableDelegationSet

func (c *Route53) GetReusableDelegationSet(input *GetReusableDelegationSetInput) (*GetReusableDelegationSetOutput, error)

GetReusableDelegationSet API operation for Amazon Route 53.

Retrieves the reusable delegation set. Send a GET request to the /2013-04-01/delegationset/delegation set ID resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetReusableDelegationSet for usage and error information.

Returned Error Codes:

  • NoSuchDelegationSet A reusable delegation set with the specified ID does not exist.

  • DelegationSetNotReusable A reusable delegation set with the specified ID does not exist.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetReusableDelegationSetInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetReusableDelegationSetRequest

func (c *Route53) GetReusableDelegationSetRequest(input *GetReusableDelegationSetInput) (req *request.Request, output *GetReusableDelegationSetOutput)

GetReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the GetReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetReusableDelegationSet for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetReusableDelegationSetRequest method.
req, resp := client.GetReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicy added in v1.0.3

func (c *Route53) GetTrafficPolicy(input *GetTrafficPolicyInput) (*GetTrafficPolicyOutput, error)

GetTrafficPolicy API operation for Amazon Route 53.

Gets information about a specific traffic policy version.

Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicy for usage and error information.

Returned Error Codes:

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetTrafficPolicyInput{
		Id:      aws.String("TrafficPolicyId"), // Required
		Version: aws.Int64(1),                  // Required
	}
	resp, err := svc.GetTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetTrafficPolicyInstance added in v1.0.3

func (c *Route53) GetTrafficPolicyInstance(input *GetTrafficPolicyInstanceInput) (*GetTrafficPolicyInstanceOutput, error)

GetTrafficPolicyInstance API operation for Amazon Route 53.

Gets information about a specified traffic policy instance.

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance resource.

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

In the Amazon Route 53 console, traffic policy instances are known as policy records.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetTrafficPolicyInstanceInput{
		Id: aws.String("TrafficPolicyInstanceId"), // Required
	}
	resp, err := svc.GetTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetTrafficPolicyInstanceCount added in v1.0.3

func (c *Route53) GetTrafficPolicyInstanceCount(input *GetTrafficPolicyInstanceCountInput) (*GetTrafficPolicyInstanceCountOutput, error)

GetTrafficPolicyInstanceCount API operation for Amazon Route 53.

Gets the number of traffic policy instances that are associated with the current AWS account.

To get the number of traffic policy instances, send a GET request to the /2013-04-01/trafficpolicyinstancecount resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicyInstanceCount for usage and error information.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetTrafficPolicyInstanceCountInput
	resp, err := svc.GetTrafficPolicyInstanceCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) GetTrafficPolicyInstanceCountRequest added in v1.0.3

func (c *Route53) GetTrafficPolicyInstanceCountRequest(input *GetTrafficPolicyInstanceCountInput) (req *request.Request, output *GetTrafficPolicyInstanceCountOutput)

GetTrafficPolicyInstanceCountRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstanceCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetTrafficPolicyInstanceCount for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicyInstanceCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetTrafficPolicyInstanceCountRequest method.
req, resp := client.GetTrafficPolicyInstanceCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicyInstanceRequest added in v1.0.3

func (c *Route53) GetTrafficPolicyInstanceRequest(input *GetTrafficPolicyInstanceInput) (req *request.Request, output *GetTrafficPolicyInstanceOutput)

GetTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetTrafficPolicyInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetTrafficPolicyInstanceRequest method.
req, resp := client.GetTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicyRequest added in v1.0.3

func (c *Route53) GetTrafficPolicyRequest(input *GetTrafficPolicyInput) (req *request.Request, output *GetTrafficPolicyOutput)

GetTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetTrafficPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetTrafficPolicyRequest method.
req, resp := client.GetTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListGeoLocations

func (c *Route53) ListGeoLocations(input *ListGeoLocationsInput) (*ListGeoLocationsOutput, error)

ListGeoLocations API operation for Amazon Route 53.

Retrieves a list of supported geo locations. Send a GET request to the /2013-04-01/geolocations resource. The response to this request includes a GeoLocationDetailsList element for each location that Amazon Route 53 supports.

Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListGeoLocations for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListGeoLocationsInput{
		MaxItems:             aws.String("PageMaxItems"),
		StartContinentCode:   aws.String("GeoLocationContinentCode"),
		StartCountryCode:     aws.String("GeoLocationCountryCode"),
		StartSubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
	}
	resp, err := svc.ListGeoLocations(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListGeoLocationsRequest

func (c *Route53) ListGeoLocationsRequest(input *ListGeoLocationsInput) (req *request.Request, output *ListGeoLocationsOutput)

ListGeoLocationsRequest generates a "aws/request.Request" representing the client's request for the ListGeoLocations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListGeoLocations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListGeoLocations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListGeoLocationsRequest method.
req, resp := client.ListGeoLocationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHealthChecks

func (c *Route53) ListHealthChecks(input *ListHealthChecksInput) (*ListHealthChecksOutput, error)

ListHealthChecks API operation for Amazon Route 53.

Retrieve a list of your health checks. Send a GET request to the /2013-04-01/healthcheck resource. The response to this request includes a HealthChecks element with zero or more HealthCheck child elements. By default, the list of health checks is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the health check that the list begins with.

For information about listing health checks using the Amazon Route 53 console, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHealthChecks for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • IncompatibleVersion The resource you are trying to access is unsupported on this Amazon Route 53 endpoint. Please consider using a newer endpoint or a tool that does so.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHealthChecksInput{
		Marker:   aws.String("PageMarker"),
		MaxItems: aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHealthChecks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListHealthChecksPages

func (c *Route53) ListHealthChecksPages(input *ListHealthChecksInput, fn func(p *ListHealthChecksOutput, lastPage bool) (shouldContinue bool)) error

ListHealthChecksPages iterates over the pages of a ListHealthChecks operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHealthChecks method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListHealthChecks operation.
pageNum := 0
err := client.ListHealthChecksPages(params,
    func(page *ListHealthChecksOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHealthChecksRequest

func (c *Route53) ListHealthChecksRequest(input *ListHealthChecksInput) (req *request.Request, output *ListHealthChecksOutput)

ListHealthChecksRequest generates a "aws/request.Request" representing the client's request for the ListHealthChecks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListHealthChecks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHealthChecks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListHealthChecksRequest method.
req, resp := client.ListHealthChecksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHostedZones

func (c *Route53) ListHostedZones(input *ListHostedZonesInput) (*ListHostedZonesOutput, error)

ListHostedZones API operation for Amazon Route 53.

To retrieve a list of your public and private hosted zones, send a GET request to the /2013-04-01/hostedzone resource. The response to this request includes a HostedZones child element for each hosted zone created by the current AWS account.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100. The response includes four values that help navigate from one group of maxitems hosted zones to the next:

  • MaxItems is the value specified for the maxitems parameter in the request that produced the current response.

  • If the value of IsTruncated in the response is true, there are more hosted zones associated with the current AWS account.

  • NextMarker is the hosted zone ID of the next hosted zone that is associated with the current AWS account. If you want to list more hosted zones, make another call to ListHostedZones, and specify the value of the NextMarker element in the marker parameter.

If IsTruncated is false, the NextMarker element is omitted from the response.

  • If you're making the second or subsequent call to ListHostedZones, the Marker element matches the value that you specified in the marker parameter in the previous request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHostedZones for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchDelegationSet A reusable delegation set with the specified ID does not exist.

  • DelegationSetNotReusable A reusable delegation set with the specified ID does not exist.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHostedZonesInput{
		DelegationSetId: aws.String("ResourceId"),
		Marker:          aws.String("PageMarker"),
		MaxItems:        aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHostedZones(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListHostedZonesByName

func (c *Route53) ListHostedZonesByName(input *ListHostedZonesByNameInput) (*ListHostedZonesByNameOutput, error)

ListHostedZonesByName API operation for Amazon Route 53.

Retrieves a list of your hosted zones in lexicographic order. Send a GET request to the /2013-04-01/hostedzonesbyname resource. The response includes a HostedZones child element for each hosted zone created by the current AWS account.

ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:

  • com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for example.com, specify ex\344mple.com for the domain name. ListHostedZonesByName alphabetizes it as:

  • com.ex\344mple.

The labels are reversed and alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the Amazon Route 53 Developer Guide.

Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the MaxItems parameter to list them in groups of up to 100. The response includes values that help navigate from one group of MaxItems hosted zones to the next:

  • The DNSName and HostedZoneId elements in the response contain the values, if any, specified for the dnsname and hostedzoneid parameters in the request that produced the current response.

  • The MaxItems element in the response contains the value, if any, that you specified for the maxitems parameter in the request that produced the current response.

  • If the value of IsTruncated in the response is true, there are more hosted zones associated with the current AWS account.

If IsTruncated is false, this response includes the last hosted zone that

is associated with the current account. The NextDNSName element and NextHostedZoneId
elements are omitted from the response.

* The NextDNSName and NextHostedZoneId elements in the response contain
the domain name and the hosted zone ID of the next hosted zone that is
associated with the current AWS account. If you want to list more hosted
zones, make another call to ListHostedZonesByName, and specify the value
of NextDNSName and NextHostedZoneId in the dnsname and hostedzoneid parameters,
respectively.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHostedZonesByName for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • InvalidDomainName The specified domain name is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHostedZonesByNameInput{
		DNSName:      aws.String("DNSName"),
		HostedZoneId: aws.String("ResourceId"),
		MaxItems:     aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHostedZonesByName(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListHostedZonesByNameRequest

func (c *Route53) ListHostedZonesByNameRequest(input *ListHostedZonesByNameInput) (req *request.Request, output *ListHostedZonesByNameOutput)

ListHostedZonesByNameRequest generates a "aws/request.Request" representing the client's request for the ListHostedZonesByName operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListHostedZonesByName for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHostedZonesByName method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListHostedZonesByNameRequest method.
req, resp := client.ListHostedZonesByNameRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHostedZonesPages

func (c *Route53) ListHostedZonesPages(input *ListHostedZonesInput, fn func(p *ListHostedZonesOutput, lastPage bool) (shouldContinue bool)) error

ListHostedZonesPages iterates over the pages of a ListHostedZones operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHostedZones method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListHostedZones operation.
pageNum := 0
err := client.ListHostedZonesPages(params,
    func(page *ListHostedZonesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHostedZonesRequest

func (c *Route53) ListHostedZonesRequest(input *ListHostedZonesInput) (req *request.Request, output *ListHostedZonesOutput)

ListHostedZonesRequest generates a "aws/request.Request" representing the client's request for the ListHostedZones operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListHostedZones for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHostedZones method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListHostedZonesRequest method.
req, resp := client.ListHostedZonesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListResourceRecordSets

func (c *Route53) ListResourceRecordSets(input *ListResourceRecordSetsInput) (*ListResourceRecordSetsOutput, error)

ListResourceRecordSets API operation for Amazon Route 53.

Lists the resource record sets in a specified hosted zone.

ListResourceRecordSets returns up to 100 resource record sets at a time in ASCII order, beginning at a position specified by the name and type elements. The action sorts results first by DNS name with the labels reversed, for example:

com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

When multiple records have the same DNS name, the action sorts results by the record type.

You can use the name and type elements to adjust the beginning position of the list of resource record sets returned:

If you do not specify Name or TypeThe results begin with the first resource record set that the hosted zone contains.

If you specify Name but not TypeThe results begin with the first resource record set in the list whose name is greater than or equal to Name.

If you specify Type but not NameAmazon Route 53 returns the InvalidInput error.

If you specify both Name and TypeThe results begin with the first resource record set in the list whose name is greater than or equal to Name, and whose type is greater than or equal to Type.

This action returns the most current version of the records. This includes records that are PENDING, and that are not yet available on all Amazon Route 53 DNS servers.

To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do not submit a ChangeResourceRecordSets request while you're paging through the results of a ListResourceRecordSets request. If you do, some pages may display results without the latest changes while other pages display results with the latest changes.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListResourceRecordSets for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListResourceRecordSetsInput{
		HostedZoneId:          aws.String("ResourceId"), // Required
		MaxItems:              aws.String("PageMaxItems"),
		StartRecordIdentifier: aws.String("ResourceRecordSetIdentifier"),
		StartRecordName:       aws.String("DNSName"),
		StartRecordType:       aws.String("RRType"),
	}
	resp, err := svc.ListResourceRecordSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListResourceRecordSetsPages

func (c *Route53) ListResourceRecordSetsPages(input *ListResourceRecordSetsInput, fn func(p *ListResourceRecordSetsOutput, lastPage bool) (shouldContinue bool)) error

ListResourceRecordSetsPages iterates over the pages of a ListResourceRecordSets operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListResourceRecordSets method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListResourceRecordSets operation.
pageNum := 0
err := client.ListResourceRecordSetsPages(params,
    func(page *ListResourceRecordSetsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListResourceRecordSetsRequest

func (c *Route53) ListResourceRecordSetsRequest(input *ListResourceRecordSetsInput) (req *request.Request, output *ListResourceRecordSetsOutput)

ListResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ListResourceRecordSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListResourceRecordSets for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListResourceRecordSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListResourceRecordSetsRequest method.
req, resp := client.ListResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListReusableDelegationSets

func (c *Route53) ListReusableDelegationSets(input *ListReusableDelegationSetsInput) (*ListReusableDelegationSetsOutput, error)

ListReusableDelegationSets API operation for Amazon Route 53.

To retrieve a list of your reusable delegation sets, send a GET request to the /2013-04-01/delegationset resource. The response to this request includes a DelegationSets element with zero, one, or multiple DelegationSet child elements. By default, the list of delegation sets is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the delegation set that the list begins with.

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to a value greater than 100, Amazon Route 53 returns only the first 100.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListReusableDelegationSets for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListReusableDelegationSetsInput{
		Marker:   aws.String("PageMarker"),
		MaxItems: aws.String("PageMaxItems"),
	}
	resp, err := svc.ListReusableDelegationSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListReusableDelegationSetsRequest

func (c *Route53) ListReusableDelegationSetsRequest(input *ListReusableDelegationSetsInput) (req *request.Request, output *ListReusableDelegationSetsOutput)

ListReusableDelegationSetsRequest generates a "aws/request.Request" representing the client's request for the ListReusableDelegationSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListReusableDelegationSets for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListReusableDelegationSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListReusableDelegationSetsRequest method.
req, resp := client.ListReusableDelegationSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTagsForResource

func (c *Route53) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTagsForResourceInput{
		ResourceId:   aws.String("TagResourceId"),   // Required
		ResourceType: aws.String("TagResourceType"), // Required
	}
	resp, err := svc.ListTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTagsForResourceRequest

func (c *Route53) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTagsForResource for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTagsForResourceRequest method.
req, resp := client.ListTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTagsForResources

func (c *Route53) ListTagsForResources(input *ListTagsForResourcesInput) (*ListTagsForResourcesOutput, error)
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTagsForResourcesInput{
		ResourceIds: []*string{ // Required
			aws.String("TagResourceId"), // Required
			// More values...
		},
		ResourceType: aws.String("TagResourceType"), // Required
	}
	resp, err := svc.ListTagsForResources(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTagsForResourcesRequest

func (c *Route53) ListTagsForResourcesRequest(input *ListTagsForResourcesInput) (req *request.Request, output *ListTagsForResourcesOutput)

ListTagsForResourcesRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResources operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTagsForResources for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResources method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTagsForResourcesRequest method.
req, resp := client.ListTagsForResourcesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicies added in v1.0.3

func (c *Route53) ListTrafficPolicies(input *ListTrafficPoliciesInput) (*ListTrafficPoliciesOutput, error)

ListTrafficPolicies API operation for Amazon Route 53.

Gets information about the latest version for every traffic policy that is associated with the current AWS account. Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policies, you can use the maxitems parameter to list them in groups of up to 100.

The response includes three values that help you navigate from one group of maxitems traffic policies to the next:

  • IsTruncated

If the value of IsTruncated in the response is true, there are more traffic

policies associated with the current AWS account.

If IsTruncated is false, this response includes the last traffic policy that

is associated with the current account.

* TrafficPolicyIdMarker

If IsTruncated is true, TrafficPolicyIdMarker is the ID of the first traffic

policy in the next group of MaxItems traffic policies. If you want to
list more traffic policies, make another call to ListTrafficPolicies,
and specify the value of the TrafficPolicyIdMarker element from the response
in the TrafficPolicyIdMarker request parameter.

If IsTruncated is false, the TrafficPolicyIdMarker element is omitted from

the response.

* MaxItems

The value that you specified for the MaxItems parameter in the request that

produced the current response.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicies for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPoliciesInput{
		MaxItems:              aws.String("PageMaxItems"),
		TrafficPolicyIdMarker: aws.String("TrafficPolicyId"),
	}
	resp, err := svc.ListTrafficPolicies(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTrafficPoliciesRequest added in v1.0.3

func (c *Route53) ListTrafficPoliciesRequest(input *ListTrafficPoliciesInput) (req *request.Request, output *ListTrafficPoliciesOutput)

ListTrafficPoliciesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicies operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTrafficPolicies for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicies method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTrafficPoliciesRequest method.
req, resp := client.ListTrafficPoliciesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstances added in v1.0.3

func (c *Route53) ListTrafficPolicyInstances(input *ListTrafficPolicyInstancesInput) (*ListTrafficPolicyInstancesOutput, error)

ListTrafficPolicyInstances API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created by using the current AWS account.

After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance resource.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes five values that help you navigate from one group of MaxItems traffic policy instances to the next:

  • IsTruncated

If the value of IsTruncated in the response is true, there are more traffic

policy instances associated with the current AWS account.

If IsTruncated is false, this response includes the last traffic policy instance

that is associated with the current account.

* MaxItems

The value that you specified for the MaxItems parameter in the request that

produced the current response.

* HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker

If IsTruncated is true, these three values in the response represent the

first traffic policy instance in the next group of MaxItems traffic policy
instances. To list more traffic policy instances, make another call to
ListTrafficPolicyInstances, and specify these values in the corresponding
request parameters.

If IsTruncated is false, all three elements are omitted from the response.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstances for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesInput{
		HostedZoneIdMarker:              aws.String("ResourceId"),
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTrafficPolicyInstancesByHostedZone added in v1.0.3

func (c *Route53) ListTrafficPolicyInstancesByHostedZone(input *ListTrafficPolicyInstancesByHostedZoneInput) (*ListTrafficPolicyInstancesByHostedZoneOutput, error)

ListTrafficPolicyInstancesByHostedZone API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created in a specified hosted zone.

After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance resource and include the ID of the hosted zone.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes four values that help you navigate from one group of MaxItems traffic policy instances to the next:

  • IsTruncated

If the value of IsTruncated in the response is true, there are more traffic

policy instances associated with the current AWS account.

* If IsTruncated is false, this response includes the last traffic policy
instance that is associated with the current account.

* MaxItems

* The value that you specified for the MaxItems parameter in the request
that produced the current response.

* TrafficPolicyInstanceNameMarker and TrafficPolicyInstanceTypeMarker

* If IsTruncated is true, these two values in the response represent the
first traffic policy instance in the next group of MaxItems traffic policy
instances. To list more traffic policy instances, make another call to
ListTrafficPolicyInstancesByHostedZone, and specify these values in the
corresponding request parameters.

* If IsTruncated is false, all three elements are omitted from the response.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstancesByHostedZone for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesByHostedZoneInput{
		HostedZoneId:                    aws.String("ResourceId"), // Required
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstancesByHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTrafficPolicyInstancesByHostedZoneRequest added in v1.0.3

func (c *Route53) ListTrafficPolicyInstancesByHostedZoneRequest(input *ListTrafficPolicyInstancesByHostedZoneInput) (req *request.Request, output *ListTrafficPolicyInstancesByHostedZoneOutput)

ListTrafficPolicyInstancesByHostedZoneRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTrafficPolicyInstancesByHostedZone for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstancesByHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTrafficPolicyInstancesByHostedZoneRequest method.
req, resp := client.ListTrafficPolicyInstancesByHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstancesByPolicy added in v1.0.3

func (c *Route53) ListTrafficPolicyInstancesByPolicy(input *ListTrafficPolicyInstancesByPolicyInput) (*ListTrafficPolicyInstancesByPolicyOutput, error)

ListTrafficPolicyInstancesByPolicy API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created by using a specify traffic policy version.

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Send a GET request to the /Route 53 API version/trafficpolicyinstance resource and include the ID and version of the traffic policy.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes five values that help you navigate from one group of MaxItems traffic policy instances to the next:

  • IsTruncated

If the value of IsTruncated in the response is true, there are more traffic

policy instances associated with the specified traffic policy.

If IsTruncated is false, this response includes the last traffic policy instance

that is associated with the specified traffic policy.

* MaxItems

The value that you specified for the MaxItems parameter in the request that

produced the current response.

* HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker

If IsTruncated is true, these values in the response represent the first

traffic policy instance in the next group of MaxItems traffic policy instances.
To list more traffic policy instances, make another call to ListTrafficPolicyInstancesByPolicy,
and specify these values in the corresponding request parameters.

If IsTruncated is false, all three elements are omitted from the response.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstancesByPolicy for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesByPolicyInput{
		TrafficPolicyId:                 aws.String("TrafficPolicyId"), // Required
		TrafficPolicyVersion:            aws.Int64(1),                  // Required
		HostedZoneIdMarker:              aws.String("ResourceId"),
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstancesByPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTrafficPolicyInstancesByPolicyRequest added in v1.0.3

func (c *Route53) ListTrafficPolicyInstancesByPolicyRequest(input *ListTrafficPolicyInstancesByPolicyInput) (req *request.Request, output *ListTrafficPolicyInstancesByPolicyOutput)

ListTrafficPolicyInstancesByPolicyRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTrafficPolicyInstancesByPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstancesByPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTrafficPolicyInstancesByPolicyRequest method.
req, resp := client.ListTrafficPolicyInstancesByPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstancesRequest added in v1.0.3

func (c *Route53) ListTrafficPolicyInstancesRequest(input *ListTrafficPolicyInstancesInput) (req *request.Request, output *ListTrafficPolicyInstancesOutput)

ListTrafficPolicyInstancesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTrafficPolicyInstances for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTrafficPolicyInstancesRequest method.
req, resp := client.ListTrafficPolicyInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyVersions added in v1.0.3

func (c *Route53) ListTrafficPolicyVersions(input *ListTrafficPolicyVersionsInput) (*ListTrafficPolicyVersionsOutput, error)

ListTrafficPolicyVersions API operation for Amazon Route 53.

Gets information about all of the versions for a specified traffic policy.

Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource and specify the ID of the traffic policy for which you want to list versions.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policies, you can use the maxitems parameter to list them in groups of up to 100.

The response includes three values that help you navigate from one group of maxitems traffic policies to the next:

  • IsTruncated

If the value of IsTruncated in the response is true, there are more traffic

policy versions associated with the specified traffic policy.

If IsTruncated is false, this response includes the last traffic policy version

that is associated with the specified traffic policy.

* TrafficPolicyVersionMarker

The ID of the next traffic policy version that is associated with the current

AWS account. If you want to list more traffic policies, make another call
to ListTrafficPolicyVersions, and specify the value of the TrafficPolicyVersionMarker
element in the TrafficPolicyVersionMarker request parameter.

If IsTruncated is false, Amazon Route 53 omits the TrafficPolicyVersionMarker

element from the response.

* MaxItems

The value that you specified for the MaxItems parameter in the request that

produced the current response.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyVersions for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyVersionsInput{
		Id:                         aws.String("TrafficPolicyId"), // Required
		MaxItems:                   aws.String("PageMaxItems"),
		TrafficPolicyVersionMarker: aws.String("TrafficPolicyVersionMarker"),
	}
	resp, err := svc.ListTrafficPolicyVersions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListTrafficPolicyVersionsRequest added in v1.0.3

func (c *Route53) ListTrafficPolicyVersionsRequest(input *ListTrafficPolicyVersionsInput) (req *request.Request, output *ListTrafficPolicyVersionsOutput)

ListTrafficPolicyVersionsRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyVersions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTrafficPolicyVersions for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyVersions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTrafficPolicyVersionsRequest method.
req, resp := client.ListTrafficPolicyVersionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListVPCAssociationAuthorizations added in v1.5.6

func (c *Route53) ListVPCAssociationAuthorizations(input *ListVPCAssociationAuthorizationsInput) (*ListVPCAssociationAuthorizationsOutput, error)
Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListVPCAssociationAuthorizationsInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		MaxResults:   aws.String("MaxResults"),
		NextToken:    aws.String("PaginationToken"),
	}
	resp, err := svc.ListVPCAssociationAuthorizations(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) ListVPCAssociationAuthorizationsRequest added in v1.5.6

func (c *Route53) ListVPCAssociationAuthorizationsRequest(input *ListVPCAssociationAuthorizationsInput) (req *request.Request, output *ListVPCAssociationAuthorizationsOutput)

ListVPCAssociationAuthorizationsRequest generates a "aws/request.Request" representing the client's request for the ListVPCAssociationAuthorizations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListVPCAssociationAuthorizations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListVPCAssociationAuthorizations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListVPCAssociationAuthorizationsRequest method.
req, resp := client.ListVPCAssociationAuthorizationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) TestDNSAnswer added in v1.4.5

func (c *Route53) TestDNSAnswer(input *TestDNSAnswerInput) (*TestDNSAnswerOutput, error)

TestDNSAnswer API operation for Amazon Route 53.

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation TestDNSAnswer for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.TestDNSAnswerInput{
		HostedZoneId:          aws.String("ResourceId"), // Required
		RecordName:            aws.String("DNSName"),    // Required
		RecordType:            aws.String("RRType"),     // Required
		EDNS0ClientSubnetIP:   aws.String("IPAddress"),
		EDNS0ClientSubnetMask: aws.String("SubnetMask"),
		ResolverIP:            aws.String("IPAddress"),
	}
	resp, err := svc.TestDNSAnswer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) TestDNSAnswerRequest added in v1.4.5

func (c *Route53) TestDNSAnswerRequest(input *TestDNSAnswerInput) (req *request.Request, output *TestDNSAnswerOutput)

TestDNSAnswerRequest generates a "aws/request.Request" representing the client's request for the TestDNSAnswer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See TestDNSAnswer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TestDNSAnswer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the TestDNSAnswerRequest method.
req, resp := client.TestDNSAnswerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateHealthCheck

func (c *Route53) UpdateHealthCheck(input *UpdateHealthCheckInput) (*UpdateHealthCheckOutput, error)

UpdateHealthCheck API operation for Amazon Route 53.

Updates an existing health check.

Send a POST request to the /2013-04-01/healthcheck/health check ID resource. The request body must include a document with an UpdateHealthCheckRequest element. For more information about updating health checks, see Creating, Updating, and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateHealthCheck for usage and error information.

Returned Error Codes:

  • NoSuchHealthCheck No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • InvalidInput The input is not valid.

  • HealthCheckVersionMismatch The value of HealthCheckVersion in the request doesn't match the value of HealthCheckVersion in the health check.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
		AlarmIdentifier: &route53.AlarmIdentifier{
			Name:   aws.String("AlarmName"),        // Required
			Region: aws.String("CloudWatchRegion"), // Required
		},
		ChildHealthChecks: []*string{
			aws.String("HealthCheckId"), // Required
			// More values...
		},
		EnableSNI:                    aws.Bool(true),
		FailureThreshold:             aws.Int64(1),
		FullyQualifiedDomainName:     aws.String("FullyQualifiedDomainName"),
		HealthCheckVersion:           aws.Int64(1),
		HealthThreshold:              aws.Int64(1),
		IPAddress:                    aws.String("IPAddress"),
		InsufficientDataHealthStatus: aws.String("InsufficientDataHealthStatus"),
		Inverted:                     aws.Bool(true),
		Port:                         aws.Int64(1),
		Regions: []*string{
			aws.String("HealthCheckRegion"), // Required
			// More values...
		},
		ResourcePath: aws.String("ResourcePath"),
		SearchString: aws.String("SearchString"),
	}
	resp, err := svc.UpdateHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) UpdateHealthCheckRequest

func (c *Route53) UpdateHealthCheckRequest(input *UpdateHealthCheckInput) (req *request.Request, output *UpdateHealthCheckOutput)

UpdateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the UpdateHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateHealthCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateHealthCheckRequest method.
req, resp := client.UpdateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateHostedZoneComment

func (c *Route53) UpdateHostedZoneComment(input *UpdateHostedZoneCommentInput) (*UpdateHostedZoneCommentOutput, error)

UpdateHostedZoneComment API operation for Amazon Route 53.

Updates the hosted zone comment. Send a POST request to the /2013-04-01/hostedzone/hosted zone ID resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateHostedZoneComment for usage and error information.

Returned Error Codes:

  • NoSuchHostedZone No hosted zone exists with the ID that you specified.

  • InvalidInput The input is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateHostedZoneCommentInput{
		Id:      aws.String("ResourceId"), // Required
		Comment: aws.String("ResourceDescription"),
	}
	resp, err := svc.UpdateHostedZoneComment(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) UpdateHostedZoneCommentRequest

func (c *Route53) UpdateHostedZoneCommentRequest(input *UpdateHostedZoneCommentInput) (req *request.Request, output *UpdateHostedZoneCommentOutput)

UpdateHostedZoneCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateHostedZoneComment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateHostedZoneComment for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateHostedZoneComment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateHostedZoneCommentRequest method.
req, resp := client.UpdateHostedZoneCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateTrafficPolicyComment added in v1.0.3

func (c *Route53) UpdateTrafficPolicyComment(input *UpdateTrafficPolicyCommentInput) (*UpdateTrafficPolicyCommentOutput, error)

UpdateTrafficPolicyComment API operation for Amazon Route 53.

Updates the comment for a specified traffic policy version.

Send a POST request to the /2013-04-01/trafficpolicy/ resource.

The request body must include a document with an UpdateTrafficPolicyCommentRequest element.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateTrafficPolicyComment for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • ConcurrentModification Another user submitted a request to update the object at the same time that you did. Retry the request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateTrafficPolicyCommentInput{
		Comment: aws.String("TrafficPolicyComment"), // Required
		Id:      aws.String("TrafficPolicyId"),      // Required
		Version: aws.Int64(1),                       // Required
	}
	resp, err := svc.UpdateTrafficPolicyComment(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) UpdateTrafficPolicyCommentRequest added in v1.0.3

func (c *Route53) UpdateTrafficPolicyCommentRequest(input *UpdateTrafficPolicyCommentInput) (req *request.Request, output *UpdateTrafficPolicyCommentOutput)

UpdateTrafficPolicyCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyComment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateTrafficPolicyComment for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateTrafficPolicyComment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateTrafficPolicyCommentRequest method.
req, resp := client.UpdateTrafficPolicyCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateTrafficPolicyInstance added in v1.0.3

func (c *Route53) UpdateTrafficPolicyInstance(input *UpdateTrafficPolicyInstanceInput) (*UpdateTrafficPolicyInstanceOutput, error)

UpdateTrafficPolicyInstance API operation for Amazon Route 53.

Updates the resource record sets in a specified hosted zone that were created based on the settings in a specified traffic policy version.

Send a POST request to the /2013-04-01/trafficpolicyinstance/traffic policy ID resource. The request body must include a document with an UpdateTrafficPolicyInstanceRequest element.

When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root resource record set name (such as example.com) while it replaces one group of resource record sets with another. Amazon Route 53 performs the following operations:

Amazon Route 53 creates a new group of resource record sets based on the specified traffic policy. This is true regardless of how substantial the differences are between the existing resource record sets and the new resource record sets.

When all of the new resource record sets have been created, Amazon Route 53 starts to respond to DNS queries for the root resource record set name (such as example.com) by using the new resource record sets.

Amazon Route 53 deletes the old group of resource record sets that are associated with the root resource record set name.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • InvalidInput The input is not valid.

  • NoSuchTrafficPolicy No traffic policy exists with the specified ID.

  • NoSuchTrafficPolicyInstance No traffic policy instance exists with the specified ID.

  • PriorRequestNotComplete If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ConflictingTypes You tried to update a traffic policy instance by using a traffic policy version that has a different DNS type than the current type for the instance. You specified the type in the JSON document in the CreateTrafficPolicy or CreateTrafficPolicyVersionrequest.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateTrafficPolicyInstanceInput{
		Id:                   aws.String("TrafficPolicyInstanceId"), // Required
		TTL:                  aws.Int64(1),                          // Required
		TrafficPolicyId:      aws.String("TrafficPolicyId"),         // Required
		TrafficPolicyVersion: aws.Int64(1),                          // Required
	}
	resp, err := svc.UpdateTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Route53) UpdateTrafficPolicyInstanceRequest added in v1.0.3

func (c *Route53) UpdateTrafficPolicyInstanceRequest(input *UpdateTrafficPolicyInstanceInput) (req *request.Request, output *UpdateTrafficPolicyInstanceOutput)

UpdateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateTrafficPolicyInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateTrafficPolicyInstanceRequest method.
req, resp := client.UpdateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) WaitUntilResourceRecordSetsChanged added in v1.1.16

func (c *Route53) WaitUntilResourceRecordSetsChanged(input *GetChangeInput) error

WaitUntilResourceRecordSetsChanged uses the Route 53 API operation GetChange to wait for a condition to be met before returning. If the condition is not meet within the max attempt window an error will be returned.

type StatusReport

type StatusReport struct {

	// The time at which the health checker performed the health check in ISO 8601
	// format (https://en.wikipedia.org/wiki/ISO_8601) and Coordinated Universal
	// Time (UTC). For example, the value 2014-10-27T17:48:16.751Z represents October
	// 27, 2014 at 17:48:16.751 UTC.
	CheckedTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// A description of the status of the health check endpoint as reported by one
	// of the Amazon Route 53 health checkers.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the status that one Amazon Route 53 health checker reports and the time of the health check.

func (StatusReport) GoString added in v0.6.5

func (s StatusReport) GoString() string

GoString returns the string representation

func (*StatusReport) SetCheckedTime added in v1.5.0

func (s *StatusReport) SetCheckedTime(v time.Time) *StatusReport

SetCheckedTime sets the CheckedTime field's value.

func (*StatusReport) SetStatus added in v1.5.0

func (s *StatusReport) SetStatus(v string) *StatusReport

SetStatus sets the Status field's value.

func (StatusReport) String added in v0.6.5

func (s StatusReport) String() string

String returns the string representation

type Tag

type Tag struct {

	// The value of Key depends on the operation that you want to perform:
	//
	//    * Add a tag to a health check or hosted zone: Key is the name that you
	//    want to give the new tag.
	//
	//    * Edit a tag: Key is the name of the tag whose Value element you want
	//    to remove.
	//
	//    *  Delete a key: Key is the name of the tag you want to remove.
	//
	//    * Give a name to a health check: Edit the default Name tag. In the Amazon
	//    Route 53 console, the list of your health checks includes a Name column
	//    that lets you see the name that you've given to each health check.
	Key *string `type:"string"`

	// The value of Value depends on the operation that you want to perform:
	//
	//    * Add a tag to a health check or hosted zone: Value is the value that
	//    you want to give the new tag.
	//
	//    * Edit a tag: Value is the new value that you want to assign the tag.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a tag that you want to add or edit for the specified health check or hosted zone.

func (Tag) GoString added in v0.6.5

func (s Tag) GoString() string

GoString returns the string representation

func (*Tag) SetKey added in v1.5.0

func (s *Tag) SetKey(v string) *Tag

SetKey sets the Key field's value.

func (*Tag) SetValue added in v1.5.0

func (s *Tag) SetValue(v string) *Tag

SetValue sets the Value field's value.

func (Tag) String added in v0.6.5

func (s Tag) String() string

String returns the string representation

type TestDNSAnswerInput added in v1.4.5

type TestDNSAnswerInput struct {

	// If the resolver that you specified for resolverip supports EDNS0, specify
	// the IP address of a client in the applicable location.
	EDNS0ClientSubnetIP *string `location:"querystring" locationName:"edns0clientsubnetip" type:"string"`

	// If you specify an IP address for edns0clientsubnetip, you can optionally
	// specify the number of bits of the IP address that you want the checking tool
	// to include in the DNS query. For example, if you specify 192.0.2.44 for edns0clientsubnetip
	// and 24 for edns0clientsubnetmask, the checking tool will simulate a request
	// from 192.0.2.0/24. The default value is 24 bits.
	EDNS0ClientSubnetMask *string `location:"querystring" locationName:"edns0clientsubnetmask" type:"string"`

	// The ID of the hosted zone that you want Amazon Route 53 to simulate a query
	// for.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string" required:"true"`

	// The name of the resource record set that you want Amazon Route 53 to simulate
	// a query for.
	//
	// RecordName is a required field
	RecordName *string `location:"querystring" locationName:"recordname" type:"string" required:"true"`

	// The type of the resource record set.
	//
	// RecordType is a required field
	RecordType *string `location:"querystring" locationName:"recordtype" type:"string" required:"true" enum:"RRType"`

	// If you want to simulate a request from a specific DNS resolver, specify the
	// IP address for that resolver. If you omit this value, TestDnsAnswer uses
	// the IP address of a DNS resolver in the AWS US East region.
	ResolverIP *string `location:"querystring" locationName:"resolverip" type:"string"`
	// contains filtered or unexported fields
}

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.

Parameters

hostedzoneidThe ID of the hosted zone that you want Amazon Route 53 to simulate a query for.

recordnameThe name of the resource record set that you want Amazon Route 53 to simulate a query for.

recordtypeThe type of the resource record set.

resolverip (optional)If you want to simulate a request from a specific DNS resolver, specify the IP address for that resolver. If you omit this value, TestDNSAnswer uses the IP address of a DNS resolver in the AWS US East region.

edns0clientsubnetip (optional)If the resolver that you specified for resolverip supports EDNS0, specify the IP address of a client in the applicable location.

edns0clientsubnetmask (optional)If you specify an IP address for edns0clientsubnetip, you can optionally specify the number of bits of the IP address that you want the checking tool to include in the DNS query. For example, if you specify 192.0.2.44 for edns0clientsubnetip and 24 for edns0clientsubnetmask, the checking tool will simulate a request from 192.0.2.0/24. The default value is 24 bits.

func (TestDNSAnswerInput) GoString added in v1.4.5

func (s TestDNSAnswerInput) GoString() string

GoString returns the string representation

func (*TestDNSAnswerInput) SetEDNS0ClientSubnetIP added in v1.5.0

func (s *TestDNSAnswerInput) SetEDNS0ClientSubnetIP(v string) *TestDNSAnswerInput

SetEDNS0ClientSubnetIP sets the EDNS0ClientSubnetIP field's value.

func (*TestDNSAnswerInput) SetEDNS0ClientSubnetMask added in v1.5.0

func (s *TestDNSAnswerInput) SetEDNS0ClientSubnetMask(v string) *TestDNSAnswerInput

SetEDNS0ClientSubnetMask sets the EDNS0ClientSubnetMask field's value.

func (*TestDNSAnswerInput) SetHostedZoneId added in v1.5.0

func (s *TestDNSAnswerInput) SetHostedZoneId(v string) *TestDNSAnswerInput

SetHostedZoneId sets the HostedZoneId field's value.

func (*TestDNSAnswerInput) SetRecordName added in v1.5.0

func (s *TestDNSAnswerInput) SetRecordName(v string) *TestDNSAnswerInput

SetRecordName sets the RecordName field's value.

func (*TestDNSAnswerInput) SetRecordType added in v1.5.0

func (s *TestDNSAnswerInput) SetRecordType(v string) *TestDNSAnswerInput

SetRecordType sets the RecordType field's value.

func (*TestDNSAnswerInput) SetResolverIP added in v1.5.0

func (s *TestDNSAnswerInput) SetResolverIP(v string) *TestDNSAnswerInput

SetResolverIP sets the ResolverIP field's value.

func (TestDNSAnswerInput) String added in v1.4.5

func (s TestDNSAnswerInput) String() string

String returns the string representation

func (*TestDNSAnswerInput) Validate added in v1.4.5

func (s *TestDNSAnswerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TestDNSAnswerOutput added in v1.4.5

type TestDNSAnswerOutput struct {

	// The Amazon Route 53 name server used to respond to the request.
	//
	// Nameserver is a required field
	Nameserver *string `type:"string" required:"true"`

	// The protocol that Amazon Route 53 used to respond to the request, either
	// UDP or TCP.
	//
	// Protocol is a required field
	Protocol *string `type:"string" required:"true"`

	// A list that contains values that Amazon Route 53 returned for this resource
	// record set.
	//
	// RecordData is a required field
	RecordData []*string `locationNameList:"RecordDataEntry" type:"list" required:"true"`

	// The name of the resource record set that you submitted a request for.
	//
	// RecordName is a required field
	RecordName *string `type:"string" required:"true"`

	// The type of the resource record set that you submitted a request for.
	//
	// RecordType is a required field
	RecordType *string `type:"string" required:"true" enum:"RRType"`

	// A code that indicates whether the request is valid or not. The most common
	// response code is NOERROR, meaning that the request is valid. If the response
	// is not valid, Amazon Route 53 returns a response code that describes the
	// error. For a list of possible response codes, see DNS RCODES (http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6)
	// on the IANA website.
	//
	// ResponseCode is a required field
	ResponseCode *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a TestDNSAnswer request.

func (TestDNSAnswerOutput) GoString added in v1.4.5

func (s TestDNSAnswerOutput) GoString() string

GoString returns the string representation

func (*TestDNSAnswerOutput) SetNameserver added in v1.5.0

func (s *TestDNSAnswerOutput) SetNameserver(v string) *TestDNSAnswerOutput

SetNameserver sets the Nameserver field's value.

func (*TestDNSAnswerOutput) SetProtocol added in v1.5.0

func (s *TestDNSAnswerOutput) SetProtocol(v string) *TestDNSAnswerOutput

SetProtocol sets the Protocol field's value.

func (*TestDNSAnswerOutput) SetRecordData added in v1.5.0

func (s *TestDNSAnswerOutput) SetRecordData(v []*string) *TestDNSAnswerOutput

SetRecordData sets the RecordData field's value.

func (*TestDNSAnswerOutput) SetRecordName added in v1.5.0

func (s *TestDNSAnswerOutput) SetRecordName(v string) *TestDNSAnswerOutput

SetRecordName sets the RecordName field's value.

func (*TestDNSAnswerOutput) SetRecordType added in v1.5.0

func (s *TestDNSAnswerOutput) SetRecordType(v string) *TestDNSAnswerOutput

SetRecordType sets the RecordType field's value.

func (*TestDNSAnswerOutput) SetResponseCode added in v1.5.0

func (s *TestDNSAnswerOutput) SetResponseCode(v string) *TestDNSAnswerOutput

SetResponseCode sets the ResponseCode field's value.

func (TestDNSAnswerOutput) String added in v1.4.5

func (s TestDNSAnswerOutput) String() string

String returns the string representation

type TrafficPolicy added in v1.0.3

type TrafficPolicy struct {

	// The comment that you specify in the CreateTrafficPolicy request, if any.
	Comment *string `type:"string"`

	// The definition of a traffic policy in JSON format. You specify the JSON document
	// to use for a new traffic policy in the CreateTrafficPolicy request. For more
	// information about the JSON format, see Traffic Policy Document Format (http://docs.aws.amazon.com/Route53/latest/APIReference/api-policies-traffic-policy-document-format.html).
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The ID that Amazon Route 53 assigned to a traffic policy when you created
	// it.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The name that you specified when you created the traffic policy.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The DNS type of the resource record sets that Amazon Route 53 creates when
	// you use a traffic policy to create a traffic policy instance.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`

	// The version number that Amazon Route 53 assigns to a traffic policy. For
	// a new traffic policy, the value of Version is always 1.
	//
	// Version is a required field
	Version *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains settings for a traffic policy.

func (TrafficPolicy) GoString added in v1.0.3

func (s TrafficPolicy) GoString() string

GoString returns the string representation

func (*TrafficPolicy) SetComment added in v1.5.0

func (s *TrafficPolicy) SetComment(v string) *TrafficPolicy

SetComment sets the Comment field's value.

func (*TrafficPolicy) SetDocument added in v1.5.0

func (s *TrafficPolicy) SetDocument(v string) *TrafficPolicy

SetDocument sets the Document field's value.

func (*TrafficPolicy) SetId added in v1.5.0

func (s *TrafficPolicy) SetId(v string) *TrafficPolicy

SetId sets the Id field's value.

func (*TrafficPolicy) SetName added in v1.5.0

func (s *TrafficPolicy) SetName(v string) *TrafficPolicy

SetName sets the Name field's value.

func (*TrafficPolicy) SetType added in v1.5.0

func (s *TrafficPolicy) SetType(v string) *TrafficPolicy

SetType sets the Type field's value.

func (*TrafficPolicy) SetVersion added in v1.5.0

func (s *TrafficPolicy) SetVersion(v int64) *TrafficPolicy

SetVersion sets the Version field's value.

func (TrafficPolicy) String added in v1.0.3

func (s TrafficPolicy) String() string

String returns the string representation

type TrafficPolicyInstance added in v1.0.3

type TrafficPolicyInstance struct {

	// The ID of the hosted zone that Amazon Route 53 created resource record sets
	// in.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The ID that Amazon Route 53 assigned to the new traffic policy instance.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// If State is Failed, an explanation of the reason for the failure. If State
	// is another value, Message is empty.
	//
	// Message is a required field
	Message *string `type:"string" required:"true"`

	// The DNS name, such as www.example.com, for which Amazon Route 53 responds
	// to queries by using the resource record sets that are associated with this
	// traffic policy instance.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The value of State is one of the following values:
	//
	// AppliedAmazon Route 53 has finished creating resource record sets, and changes
	// have propagated to all Amazon Route 53 edge locations.
	//
	// CreatingAmazon Route 53 is creating the resource record sets. Use GetTrafficPolicyInstance
	// to confirm that the CreateTrafficPolicyInstance request completed successfully.
	//
	// FailedAmazon Route 53 wasn't able to create or update the resource record
	// sets. When the value of State is Failed, see Message for an explanation of
	// what caused the request to fail.
	//
	// State is a required field
	State *string `type:"string" required:"true"`

	// The TTL that Amazon Route 53 assigned to all of the resource record sets
	// that it created in the specified hosted zone.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that Amazon Route 53 used to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `type:"string" required:"true"`

	// The DNS type that Amazon Route 53 assigned to all of the resource record
	// sets that it created for this traffic policy instance.
	//
	// TrafficPolicyType is a required field
	TrafficPolicyType *string `type:"string" required:"true" enum:"RRType"`

	// The version of the traffic policy that Amazon Route 53 used to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains settings for the new traffic policy instance.

func (TrafficPolicyInstance) GoString added in v1.0.3

func (s TrafficPolicyInstance) GoString() string

GoString returns the string representation

func (*TrafficPolicyInstance) SetHostedZoneId added in v1.5.0

func (s *TrafficPolicyInstance) SetHostedZoneId(v string) *TrafficPolicyInstance

SetHostedZoneId sets the HostedZoneId field's value.

func (*TrafficPolicyInstance) SetId added in v1.5.0

SetId sets the Id field's value.

func (*TrafficPolicyInstance) SetMessage added in v1.5.0

SetMessage sets the Message field's value.

func (*TrafficPolicyInstance) SetName added in v1.5.0

SetName sets the Name field's value.

func (*TrafficPolicyInstance) SetState added in v1.5.0

SetState sets the State field's value.

func (*TrafficPolicyInstance) SetTTL added in v1.5.0

SetTTL sets the TTL field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyId added in v1.5.0

func (s *TrafficPolicyInstance) SetTrafficPolicyId(v string) *TrafficPolicyInstance

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyType added in v1.5.0

func (s *TrafficPolicyInstance) SetTrafficPolicyType(v string) *TrafficPolicyInstance

SetTrafficPolicyType sets the TrafficPolicyType field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyVersion added in v1.5.0

func (s *TrafficPolicyInstance) SetTrafficPolicyVersion(v int64) *TrafficPolicyInstance

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (TrafficPolicyInstance) String added in v1.0.3

func (s TrafficPolicyInstance) String() string

String returns the string representation

type TrafficPolicySummary added in v1.0.3

type TrafficPolicySummary struct {

	// The ID that Amazon Route 53 assigned to the traffic policy when you created
	// it.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The version number of the latest version of the traffic policy.
	//
	// LatestVersion is a required field
	LatestVersion *int64 `min:"1" type:"integer" required:"true"`

	// The name that you specified for the traffic policy when you created it.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The number of traffic policies that are associated with the current AWS account.
	//
	// TrafficPolicyCount is a required field
	TrafficPolicyCount *int64 `min:"1" type:"integer" required:"true"`

	// The DNS type of the resource record sets that Amazon Route 53 creates when
	// you use a traffic policy to create a traffic policy instance.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the latest version of one traffic policy that is associated with the current AWS account.

func (TrafficPolicySummary) GoString added in v1.0.3

func (s TrafficPolicySummary) GoString() string

GoString returns the string representation

func (*TrafficPolicySummary) SetId added in v1.5.0

SetId sets the Id field's value.

func (*TrafficPolicySummary) SetLatestVersion added in v1.5.0

func (s *TrafficPolicySummary) SetLatestVersion(v int64) *TrafficPolicySummary

SetLatestVersion sets the LatestVersion field's value.

func (*TrafficPolicySummary) SetName added in v1.5.0

SetName sets the Name field's value.

func (*TrafficPolicySummary) SetTrafficPolicyCount added in v1.5.0

func (s *TrafficPolicySummary) SetTrafficPolicyCount(v int64) *TrafficPolicySummary

SetTrafficPolicyCount sets the TrafficPolicyCount field's value.

func (*TrafficPolicySummary) SetType added in v1.5.0

SetType sets the Type field's value.

func (TrafficPolicySummary) String added in v1.0.3

func (s TrafficPolicySummary) String() string

String returns the string representation

type UpdateHealthCheckInput

type UpdateHealthCheckInput struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// A complex type that contains one ChildHealthCheck element for each health
	// check that you want to associate with a CALCULATED health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the client_hello
	// message. If you don't enable SNI, the status of the health check will be
	// SSL alert handshake_failure. A health check can also have that status for
	// other reasons. If SNI is enabled and you're still getting the error, check
	// the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	// If a health check already has a value for IPAddress, you can change the value.
	// However, you can't update an existing health check to add or remove the value
	// of IPAddress.
	//
	// If you specify a value forIPAddress:
	//
	// Amazon Route 53 sends health check requests to the specified IPv4 or IPv6
	// address and passes the value of FullyQualifiedDomainName in the Host header
	// for all health checks except TCP health checks. This is typically the fully
	// qualified DNS name of the endpoint on which you want Amazon Route 53 to perform
	// health checks.
	//
	// When Amazon Route 53 checks the health of an endpoint, here is how it constructs
	// the Host header:
	//
	//    * If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for
	//    Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to
	//    the endpoint in the Host header.
	//
	//    * If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH
	//    for Type, Amazon Route 53 passes the value of FullyQualifiedDomainName
	//    to the endpoint in the Host header.
	//
	//    * If you specify another value for Port and any value except TCP for Type,
	//    Amazon Route 53 passes FullyQualifiedDomainName:Port to the endpoint in
	//    the Host header.
	//
	// If you don't specify a value for FullyQualifiedDomainName, Amazon Route 53
	// substitutes the value of IPAddress in the Host header in each of the above
	// cases.
	//
	// If you don't specify a value forIPAddress:
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 sends a DNS request
	// to the domain that you specify in FullyQualifiedDomainName at the interval
	// you specify in RequestInterval. Using an IPv4 address that is returned by
	// DNS, Amazon Route 53 then checks the health of the endpoint.
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 uses only IPv4
	// to send health checks to the endpoint. If there's no resource record set
	// with a type of A for the name that you specify for FullyQualifiedDomainName,
	// the health check fails with a "DNS resolution failed" error.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-1-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	// In this configuration, if the value of FullyQualifiedDomainName matches the
	// name of the resource record sets and you then associate the health check
	// with those resource record sets, health check results will be unpredictable.
	//
	// In addition, if the value of Type is HTTP, HTTPS, HTTP_STR_MATCH, or HTTPS_STR_MATCH,
	// Amazon Route 53 passes the value of FullyQualifiedDomainName in the Host
	// header, as it does when you specify a value for IPAddress. If the value of
	// Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The ID for the health check for which you want detailed information. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`

	// A sequential counter that Amazon Route 53 sets to 1 when you create a health
	// check and increments by 1 each time you update settings for the health check.
	//
	// We recommend that you use GetHealthCheck or ListHealthChecks to get the current
	// value of HealthCheckVersion for the health check that you want to update,
	// and that you include that value in your UpdateHealthCheck request. This prevents
	// Amazon Route 53 from overwriting an intervening update:
	//
	//    * f the value in the UpdateHealthCheck request matches the value of HealthCheckVersion
	//    in the health check, Amazon Route 53 updates the health check with the
	//    new settings.
	//
	//    * If the value of HealthCheckVersion in the health check is greater, the
	//    health check was changed after you got the version number. Amazon Route
	//    53 does not update the health check, and it returns a HealthCheckVersionMismatch
	//    error.
	HealthCheckVersion *int64 `min:"1" type:"long"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the ChildHealthChecks and
	// ChildHealthCheck elements.
	//
	// Note the following:
	//
	//    * If you specify a number greater than the number of child health checks,
	//    Amazon Route 53 always considers this health check to be unhealthy.
	//
	//    * If you specify 0, Amazon Route 53 always considers this health check
	//    to be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53
	// to perform health checks on. If you don't specify a value for IPAddress,
	// Amazon Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address that is returned by DNS, Amazon Route 53 then checks
	// the health of the endpoint.
	//
	// If the endpoint is an EC2 instance, we recommend that you create an Elastic
	// IP address, associate it with your EC2 instance, and specify the Elastic
	// IP address for IPAddress. This ensures that the IP address of your instance
	// never changes. For more information, see Elastic IP Addresses (EIP) (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html)
	// in the Amazon EC2 User Guide for Linux Instances.
	//
	// If a health check already has a value for IPAddress, you can change the value.
	// However, you can't update an existing health check to add or remove the value
	// of IPAddress.
	//
	// For more information, see UpdateHealthCheckRequest$FullyQualifiedDomainName.
	//
	// Constraints: Amazon Route 53 can't check the health of endpoints for which
	// the IP address is in local, private, non-routable, or multicast ranges. For
	// more information about IP addresses for which you can't create health checks,
	// see the following documents:
	//
	//    * RFC 5735, Special Use IPv4 Addresses (https://tools.ietf.org/html/rfc5735)
	//
	//    * RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space (https://tools.ietf.org/html/rfc6598)
	//
	//    * RFC 5156, Special-Use IPv6 Addresses (https://tools.ietf.org/html/rfc5156)
	IPAddress *string `type:"string"`

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//    * Healthy: Amazon Route 53 considers the health check to be healthy.
	//
	//    * Unhealthy: Amazon Route 53 considers the health check to be unhealthy.
	//
	//    * LastKnownStatus: Amazon Route 53 uses the status of the health check
	//    from the last time CloudWatch had sufficient data to determine the alarm
	//    state. For new health checks that have no last known status, the default
	//    status for the health check is healthy.
	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region from which
	// you want Amazon Route 53 health checkers to check the specified endpoint.
	Regions []*string `locationNameList:"Region" min:"1" type:"list"`

	// The path that you want Amazon Route 53 to request when performing health
	// checks. The path can be any value for which your endpoint will return an
	// HTTP status code of 2xx or 3xx when the endpoint is healthy, for example
	// the file /docs/route53-health-check.html.
	//
	// Specify this value only if you want to change it.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy. (You can't change the value of Type when you update
	// a health check.)
	SearchString *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the health check request information.

func (UpdateHealthCheckInput) GoString added in v0.6.5

func (s UpdateHealthCheckInput) GoString() string

GoString returns the string representation

func (*UpdateHealthCheckInput) SetAlarmIdentifier added in v1.5.0

SetAlarmIdentifier sets the AlarmIdentifier field's value.

func (*UpdateHealthCheckInput) SetChildHealthChecks added in v1.5.0

func (s *UpdateHealthCheckInput) SetChildHealthChecks(v []*string) *UpdateHealthCheckInput

SetChildHealthChecks sets the ChildHealthChecks field's value.

func (*UpdateHealthCheckInput) SetEnableSNI added in v1.5.0

SetEnableSNI sets the EnableSNI field's value.

func (*UpdateHealthCheckInput) SetFailureThreshold added in v1.5.0

func (s *UpdateHealthCheckInput) SetFailureThreshold(v int64) *UpdateHealthCheckInput

SetFailureThreshold sets the FailureThreshold field's value.

func (*UpdateHealthCheckInput) SetFullyQualifiedDomainName added in v1.5.0

func (s *UpdateHealthCheckInput) SetFullyQualifiedDomainName(v string) *UpdateHealthCheckInput

SetFullyQualifiedDomainName sets the FullyQualifiedDomainName field's value.

func (*UpdateHealthCheckInput) SetHealthCheckId added in v1.5.0

func (s *UpdateHealthCheckInput) SetHealthCheckId(v string) *UpdateHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (*UpdateHealthCheckInput) SetHealthCheckVersion added in v1.5.0

func (s *UpdateHealthCheckInput) SetHealthCheckVersion(v int64) *UpdateHealthCheckInput

SetHealthCheckVersion sets the HealthCheckVersion field's value.

func (*UpdateHealthCheckInput) SetHealthThreshold added in v1.5.0

func (s *UpdateHealthCheckInput) SetHealthThreshold(v int64) *UpdateHealthCheckInput

SetHealthThreshold sets the HealthThreshold field's value.

func (*UpdateHealthCheckInput) SetIPAddress added in v1.5.0

SetIPAddress sets the IPAddress field's value.

func (*UpdateHealthCheckInput) SetInsufficientDataHealthStatus added in v1.5.0

func (s *UpdateHealthCheckInput) SetInsufficientDataHealthStatus(v string) *UpdateHealthCheckInput

SetInsufficientDataHealthStatus sets the InsufficientDataHealthStatus field's value.

func (*UpdateHealthCheckInput) SetInverted added in v1.5.0

SetInverted sets the Inverted field's value.

func (*UpdateHealthCheckInput) SetPort added in v1.5.0

SetPort sets the Port field's value.

func (*UpdateHealthCheckInput) SetRegions added in v1.5.0

SetRegions sets the Regions field's value.

func (*UpdateHealthCheckInput) SetResourcePath added in v1.5.0

func (s *UpdateHealthCheckInput) SetResourcePath(v string) *UpdateHealthCheckInput

SetResourcePath sets the ResourcePath field's value.

func (*UpdateHealthCheckInput) SetSearchString added in v1.5.0

func (s *UpdateHealthCheckInput) SetSearchString(v string) *UpdateHealthCheckInput

SetSearchString sets the SearchString field's value.

func (UpdateHealthCheckInput) String added in v0.6.5

func (s UpdateHealthCheckInput) String() string

String returns the string representation

func (*UpdateHealthCheckInput) Validate added in v1.1.21

func (s *UpdateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHealthCheckOutput

type UpdateHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

func (UpdateHealthCheckOutput) GoString added in v0.6.5

func (s UpdateHealthCheckOutput) GoString() string

GoString returns the string representation

func (*UpdateHealthCheckOutput) SetHealthCheck added in v1.5.0

SetHealthCheck sets the HealthCheck field's value.

func (UpdateHealthCheckOutput) String added in v0.6.5

func (s UpdateHealthCheckOutput) String() string

String returns the string representation

type UpdateHostedZoneCommentInput

type UpdateHostedZoneCommentInput struct {

	// The new comment for the hosted zone. If you don't specify a value for Comment,
	// Amazon Route 53 deletes the existing value of the Comment element, if any.
	Comment *string `type:"string"`

	// The ID for the hosted zone for which you want to update the comment.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the hosted zone request information.

func (UpdateHostedZoneCommentInput) GoString added in v0.6.5

func (s UpdateHostedZoneCommentInput) GoString() string

GoString returns the string representation

func (*UpdateHostedZoneCommentInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*UpdateHostedZoneCommentInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (UpdateHostedZoneCommentInput) String added in v0.6.5

String returns the string representation

func (*UpdateHostedZoneCommentInput) Validate added in v1.1.21

func (s *UpdateHostedZoneCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHostedZoneCommentOutput

type UpdateHostedZoneCommentOutput struct {

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the UpdateHostedZoneCommentRequest.

func (UpdateHostedZoneCommentOutput) GoString added in v0.6.5

GoString returns the string representation

func (*UpdateHostedZoneCommentOutput) SetHostedZone added in v1.5.0

SetHostedZone sets the HostedZone field's value.

func (UpdateHostedZoneCommentOutput) String added in v0.6.5

String returns the string representation

type UpdateTrafficPolicyCommentInput added in v1.0.3

type UpdateTrafficPolicyCommentInput struct {

	// The new comment for the specified traffic policy and version.
	//
	// Comment is a required field
	Comment *string `type:"string" required:"true"`

	// The value of Id for the traffic policy for which you want to update the comment.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The value of Version for the traffic policy for which you want to update
	// the comment.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy for which you want to update the comment.

func (UpdateTrafficPolicyCommentInput) GoString added in v1.0.3

GoString returns the string representation

func (*UpdateTrafficPolicyCommentInput) SetComment added in v1.5.0

SetComment sets the Comment field's value.

func (*UpdateTrafficPolicyCommentInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (*UpdateTrafficPolicyCommentInput) SetVersion added in v1.5.0

SetVersion sets the Version field's value.

func (UpdateTrafficPolicyCommentInput) String added in v1.0.3

String returns the string representation

func (*UpdateTrafficPolicyCommentInput) Validate added in v1.1.21

func (s *UpdateTrafficPolicyCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyCommentOutput added in v1.0.3

type UpdateTrafficPolicyCommentOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the traffic policy.

func (UpdateTrafficPolicyCommentOutput) GoString added in v1.0.3

GoString returns the string representation

func (*UpdateTrafficPolicyCommentOutput) SetTrafficPolicy added in v1.5.0

SetTrafficPolicy sets the TrafficPolicy field's value.

func (UpdateTrafficPolicyCommentOutput) String added in v1.0.3

String returns the string representation

type UpdateTrafficPolicyInstanceInput added in v1.0.3

type UpdateTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to update.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The TTL that you want Amazon Route 53 to assign to all of the updated resource
	// record sets.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want Amazon Route 53 to use to update
	// resource record sets for the specified traffic policy instance.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `type:"string" required:"true"`

	// The version of the traffic policy that you want Amazon Route 53 to use to
	// update resource record sets for the specified traffic policy instance.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to update based on a specified traffic policy instance.

func (UpdateTrafficPolicyInstanceInput) GoString added in v1.0.3

GoString returns the string representation

func (*UpdateTrafficPolicyInstanceInput) SetId added in v1.5.0

SetId sets the Id field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTTL added in v1.5.0

SetTTL sets the TTL field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTrafficPolicyId added in v1.5.0

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTrafficPolicyVersion added in v1.5.0

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (UpdateTrafficPolicyInstanceInput) String added in v1.0.3

String returns the string representation

func (*UpdateTrafficPolicyInstanceInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyInstanceOutput added in v1.0.3

type UpdateTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the updated traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (UpdateTrafficPolicyInstanceOutput) GoString added in v1.0.3

GoString returns the string representation

func (*UpdateTrafficPolicyInstanceOutput) SetTrafficPolicyInstance added in v1.5.0

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (UpdateTrafficPolicyInstanceOutput) String added in v1.0.3

String returns the string representation

type VPC

type VPC struct {

	// The ID of an Amazon VPC.
	VPCId *string `type:"string"`

	// The region in which you created the VPC that you want to associate with the
	// specified Amazon Route 53 hosted zone.
	VPCRegion *string `min:"1" type:"string" enum:"VPCRegion"`
	// contains filtered or unexported fields
}

A complex type that contains information about an Amazon VPC that is associated with a private hosted zone.

func (VPC) GoString added in v0.6.5

func (s VPC) GoString() string

GoString returns the string representation

func (*VPC) SetVPCId added in v1.5.0

func (s *VPC) SetVPCId(v string) *VPC

SetVPCId sets the VPCId field's value.

func (*VPC) SetVPCRegion added in v1.5.0

func (s *VPC) SetVPCRegion(v string) *VPC

SetVPCRegion sets the VPCRegion field's value.

func (VPC) String added in v0.6.5

func (s VPC) String() string

String returns the string representation

func (*VPC) Validate added in v1.1.21

func (s *VPC) Validate() error

Validate inspects the fields of the type to determine if they are valid.

Directories

Path Synopsis
Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.
Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL