cloudwatch

package
v0.7.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 4, 2015 License: Apache-2.0 Imports: 4 Imported by: 0

Documentation

Overview

Package cloudwatch provides a client for Amazon CloudWatch.

Index

Examples

Constants

View Source 
const (
	// @enum ComparisonOperator
	ComparisonOperatorGreaterThanOrEqualToThreshold = "GreaterThanOrEqualToThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorGreaterThanThreshold = "GreaterThanThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorLessThanThreshold = "LessThanThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorLessThanOrEqualToThreshold = "LessThanOrEqualToThreshold"
)
View Source 
const (
	// @enum HistoryItemType
	HistoryItemTypeConfigurationUpdate = "ConfigurationUpdate"
	// @enum HistoryItemType
	HistoryItemTypeStateUpdate = "StateUpdate"
	// @enum HistoryItemType
	HistoryItemTypeAction = "Action"
)
View Source 
const (
	// @enum StandardUnit
	StandardUnitSeconds = "Seconds"
	// @enum StandardUnit
	StandardUnitMicroseconds = "Microseconds"
	// @enum StandardUnit
	StandardUnitMilliseconds = "Milliseconds"
	// @enum StandardUnit
	StandardUnitBytes = "Bytes"
	// @enum StandardUnit
	StandardUnitKilobytes = "Kilobytes"
	// @enum StandardUnit
	StandardUnitMegabytes = "Megabytes"
	// @enum StandardUnit
	StandardUnitGigabytes = "Gigabytes"
	// @enum StandardUnit
	StandardUnitTerabytes = "Terabytes"
	// @enum StandardUnit
	StandardUnitBits = "Bits"
	// @enum StandardUnit
	StandardUnitKilobits = "Kilobits"
	// @enum StandardUnit
	StandardUnitMegabits = "Megabits"
	// @enum StandardUnit
	StandardUnitGigabits = "Gigabits"
	// @enum StandardUnit
	StandardUnitTerabits = "Terabits"
	// @enum StandardUnit
	StandardUnitPercent = "Percent"
	// @enum StandardUnit
	StandardUnitCount = "Count"
	// @enum StandardUnit
	StandardUnitBytesSecond = "Bytes/Second"
	// @enum StandardUnit
	StandardUnitKilobytesSecond = "Kilobytes/Second"
	// @enum StandardUnit
	StandardUnitMegabytesSecond = "Megabytes/Second"
	// @enum StandardUnit
	StandardUnitGigabytesSecond = "Gigabytes/Second"
	// @enum StandardUnit
	StandardUnitTerabytesSecond = "Terabytes/Second"
	// @enum StandardUnit
	StandardUnitBitsSecond = "Bits/Second"
	// @enum StandardUnit
	StandardUnitKilobitsSecond = "Kilobits/Second"
	// @enum StandardUnit
	StandardUnitMegabitsSecond = "Megabits/Second"
	// @enum StandardUnit
	StandardUnitGigabitsSecond = "Gigabits/Second"
	// @enum StandardUnit
	StandardUnitTerabitsSecond = "Terabits/Second"
	// @enum StandardUnit
	StandardUnitCountSecond = "Count/Second"
	// @enum StandardUnit
	StandardUnitNone = "None"
)
View Source 
const (
	// @enum StateValue
	StateValueOk = "OK"
	// @enum StateValue
	StateValueAlarm = "ALARM"
	// @enum StateValue
	StateValueInsufficientData = "INSUFFICIENT_DATA"
)
View Source 
const (
	// @enum Statistic
	StatisticSampleCount = "SampleCount"
	// @enum Statistic
	StatisticAverage = "Average"
	// @enum Statistic
	StatisticSum = "Sum"
	// @enum Statistic
	StatisticMinimum = "Minimum"
	// @enum Statistic
	StatisticMaximum = "Maximum"
)

Variables

This section is empty.

Functions

This section is empty.

Types

type AlarmHistoryItem 

type AlarmHistoryItem struct {
	// The descriptive name for the alarm.
	AlarmName *string `type:"string"`

	// Machine-readable data about the alarm in JSON format.
	HistoryData *string `type:"string"`

	// The type of alarm history item.
	HistoryItemType *string `type:"string" enum:"HistoryItemType"`

	// A human-readable summary of the alarm history.
	HistorySummary *string `type:"string"`

	// The time stamp for the alarm history item. Amazon CloudWatch uses Coordinated
	// Universal Time (UTC) when returning time stamps, which do not accommodate
	// seasonal adjustments such as daylight savings time. For more information,
	// see Time stamps (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/cloudwatch_concepts.html#about_timestamp)
	// in the Amazon CloudWatch Developer Guide.
	Timestamp *time.Time `type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

The AlarmHistoryItem data type contains descriptive information about the history of a specific alarm. If you call DescribeAlarmHistory, Amazon CloudWatch returns this data type as part of the DescribeAlarmHistoryResult data type.

func (AlarmHistoryItem) GoString added in v0.6.5 

func (s AlarmHistoryItem) GoString() string

GoString returns the string representation

func (AlarmHistoryItem) String added in v0.6.5 

func (s AlarmHistoryItem) String() string

String returns the string representation

type CloudWatch 

type CloudWatch struct {
	*aws.Service
}

This is the Amazon CloudWatch API Reference. This guide provides detailed information about Amazon CloudWatch actions, data types, parameters, and errors. For detailed information about Amazon CloudWatch features and their associated API calls, go to the Amazon CloudWatch Developer Guide (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide).

Amazon CloudWatch is a web service that enables you to publish, monitor, and manage various metrics, as well as configure alarm actions based on data from metrics. For more information about this product go to http://aws.amazon.com/cloudwatch (http://aws.amazon.com/cloudwatch). 

For information about the namespace, metric names, and dimensions that

other Amazon Web Services products use to send metrics to Cloudwatch, go to Amazon CloudWatch Metrics, Namespaces, and Dimensions Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html) in the Amazon CloudWatch Developer Guide.

Use the following links to get started using the Amazon CloudWatch API Reference: 

Actions (http://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_Operations.html):

An alphabetical list of all Amazon CloudWatch actions. Data Types (http://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/API_Types.html): An alphabetical list of all Amazon CloudWatch data types. Common Parameters (http://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/CommonParameters.html): Parameters that all Query actions can use. Common Errors (http://docs.aws.amazon.com/AmazonCloudWatch/latest/APIReference/CommonErrors.html): Client and server errors that all actions can return. Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/index.html?rande.html): Itemized regions and endpoints for all AWS products. WSDL Location (http://monitoring.amazonaws.com/doc/2010-08-01/CloudWatch.wsdl): http://monitoring.amazonaws.com/doc/2010-08-01/CloudWatch.wsdl In addition to using the Amazon CloudWatch API, you can also use the following SDKs and third-party libraries to access Amazon CloudWatch programmatically. 

AWS SDK for Java Documentation (http://aws.amazon.com/documentation/sdkforjava/)

AWS SDK for .NET Documentation (http://aws.amazon.com/documentation/sdkfornet/) AWS SDK for PHP Documentation (http://aws.amazon.com/documentation/sdkforphp/) AWS SDK for Ruby Documentation (http://aws.amazon.com/documentation/sdkforruby/) 

Developers in the AWS developer community also provide their own libraries,

which you can find at the following AWS developer centers: 

AWS Java Developer Center (http://aws.amazon.com/java/) AWS PHP Developer

Center (http://aws.amazon.com/php/) AWS Python Developer Center (http://aws.amazon.com/python/) AWS Ruby Developer Center (http://aws.amazon.com/ruby/) AWS Windows and .NET Developer Center (http://aws.amazon.com/net/)

func New 

func New(config *aws.Config) *CloudWatch

New returns a new CloudWatch client.

func (*CloudWatch) DeleteAlarms 

func (c *CloudWatch) DeleteAlarms(input *DeleteAlarmsInput) (*DeleteAlarmsOutput, error)

Deletes all specified alarms. In the event of an error, no alarms are deleted.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.DeleteAlarmsInput{
		AlarmNames: []*string{ // Required
			aws.String("AlarmName"), // Required
			// More values...
		},
	}
	resp, err := svc.DeleteAlarms(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) DeleteAlarmsRequest 

func (c *CloudWatch) DeleteAlarmsRequest(input *DeleteAlarmsInput) (req *aws.Request, output *DeleteAlarmsOutput)

DeleteAlarmsRequest generates a request for the DeleteAlarms operation.

func (*CloudWatch) DescribeAlarmHistory 

func (c *CloudWatch) DescribeAlarmHistory(input *DescribeAlarmHistoryInput) (*DescribeAlarmHistoryOutput, error)

Retrieves history for the specified alarm. Filter alarms by date range or item type. If an alarm name is not specified, Amazon CloudWatch returns histories for all of the owner's alarms.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.DescribeAlarmHistoryInput{
		AlarmName:       aws.String("AlarmName"),
		EndDate:         aws.Time(time.Now()),
		HistoryItemType: aws.String("HistoryItemType"),
		MaxRecords:      aws.Int64(1),
		NextToken:       aws.String("NextToken"),
		StartDate:       aws.Time(time.Now()),
	}
	resp, err := svc.DescribeAlarmHistory(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) DescribeAlarmHistoryPages 

func (c *CloudWatch) DescribeAlarmHistoryPages(input *DescribeAlarmHistoryInput, fn func(p *DescribeAlarmHistoryOutput, lastPage bool) (shouldContinue bool)) error

func (*CloudWatch) DescribeAlarmHistoryRequest 

func (c *CloudWatch) DescribeAlarmHistoryRequest(input *DescribeAlarmHistoryInput) (req *aws.Request, output *DescribeAlarmHistoryOutput)

DescribeAlarmHistoryRequest generates a request for the DescribeAlarmHistory operation.

func (*CloudWatch) DescribeAlarms 

func (c *CloudWatch) DescribeAlarms(input *DescribeAlarmsInput) (*DescribeAlarmsOutput, error)

Retrieves alarms with the specified names. If no name is specified, all alarms for the user are returned. Alarms can be retrieved by using only a prefix for the alarm name, the alarm state, or a prefix for any action.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.DescribeAlarmsInput{
		ActionPrefix:    aws.String("ActionPrefix"),
		AlarmNamePrefix: aws.String("AlarmNamePrefix"),
		AlarmNames: []*string{
			aws.String("AlarmName"), // Required
			// More values...
		},
		MaxRecords: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		StateValue: aws.String("StateValue"),
	}
	resp, err := svc.DescribeAlarms(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) DescribeAlarmsForMetric 

func (c *CloudWatch) DescribeAlarmsForMetric(input *DescribeAlarmsForMetricInput) (*DescribeAlarmsForMetricOutput, error)

Retrieves all alarms for a single metric. Specify a statistic, period, or unit to filter the set of alarms further.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.DescribeAlarmsForMetricInput{
		MetricName: aws.String("MetricName"), // Required
		Namespace:  aws.String("Namespace"),  // Required
		Dimensions: []*cloudwatch.Dimension{
			{ // Required
				Name:  aws.String("DimensionName"),  // Required
				Value: aws.String("DimensionValue"), // Required
			},
			// More values...
		},
		Period:    aws.Int64(1),
		Statistic: aws.String("Statistic"),
		Unit:      aws.String("StandardUnit"),
	}
	resp, err := svc.DescribeAlarmsForMetric(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) DescribeAlarmsForMetricRequest 

func (c *CloudWatch) DescribeAlarmsForMetricRequest(input *DescribeAlarmsForMetricInput) (req *aws.Request, output *DescribeAlarmsForMetricOutput)

DescribeAlarmsForMetricRequest generates a request for the DescribeAlarmsForMetric operation.

func (*CloudWatch) DescribeAlarmsPages 

func (c *CloudWatch) DescribeAlarmsPages(input *DescribeAlarmsInput, fn func(p *DescribeAlarmsOutput, lastPage bool) (shouldContinue bool)) error

func (*CloudWatch) DescribeAlarmsRequest 

func (c *CloudWatch) DescribeAlarmsRequest(input *DescribeAlarmsInput) (req *aws.Request, output *DescribeAlarmsOutput)

DescribeAlarmsRequest generates a request for the DescribeAlarms operation.

func (*CloudWatch) DisableAlarmActions 

func (c *CloudWatch) DisableAlarmActions(input *DisableAlarmActionsInput) (*DisableAlarmActionsOutput, error)

Disables actions for the specified alarms. When an alarm's actions are disabled the alarm's state may change, but none of the alarm's actions will execute.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.DisableAlarmActionsInput{
		AlarmNames: []*string{ // Required
			aws.String("AlarmName"), // Required
			// More values...
		},
	}
	resp, err := svc.DisableAlarmActions(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) DisableAlarmActionsRequest 

func (c *CloudWatch) DisableAlarmActionsRequest(input *DisableAlarmActionsInput) (req *aws.Request, output *DisableAlarmActionsOutput)

DisableAlarmActionsRequest generates a request for the DisableAlarmActions operation.

func (*CloudWatch) EnableAlarmActions 

func (c *CloudWatch) EnableAlarmActions(input *EnableAlarmActionsInput) (*EnableAlarmActionsOutput, error)

Enables actions for the specified alarms.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.EnableAlarmActionsInput{
		AlarmNames: []*string{ // Required
			aws.String("AlarmName"), // Required
			// More values...
		},
	}
	resp, err := svc.EnableAlarmActions(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) EnableAlarmActionsRequest 

func (c *CloudWatch) EnableAlarmActionsRequest(input *EnableAlarmActionsInput) (req *aws.Request, output *EnableAlarmActionsOutput)

EnableAlarmActionsRequest generates a request for the EnableAlarmActions operation.

func (*CloudWatch) GetMetricStatistics 

func (c *CloudWatch) GetMetricStatistics(input *GetMetricStatisticsInput) (*GetMetricStatisticsOutput, error)

Gets statistics for the specified metric. 

The maximum number of data points returned from a single GetMetricStatistics

request is 1,440, wereas the maximum number of data points that can be queried is 50,850. If you make a request that generates more than 1,440 data points, Amazon CloudWatch returns an error. In such a case, you can alter the request by narrowing the specified time range or increasing the specified period. Alternatively, you can make multiple requests across adjacent time ranges. 

Amazon CloudWatch aggregates data points based on the length of the period

that you specify. For example, if you request statistics with a one-minute granularity, Amazon CloudWatch aggregates data points with time stamps that fall within the same one-minute period. In such a case, the data points queried can greatly outnumber the data points returned. 

The following examples show various statistics allowed by the data point

query maximum of 50,850 when you call GetMetricStatistics on Amazon EC2 instances with detailed (one-minute) monitoring enabled: 

Statistics for up to 400 instances for a span of one hour Statistics for

up to 35 instances over a span of 24 hours Statistics for up to 2 instances over a span of 2 weeks For information about the namespace, metric names, and dimensions that other Amazon Web Services products use to send metrics to Cloudwatch, go to Amazon CloudWatch Metrics, Namespaces, and Dimensions Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html) in the Amazon CloudWatch Developer Guide.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.GetMetricStatisticsInput{
		EndTime:    aws.Time(time.Now()),     // Required
		MetricName: aws.String("MetricName"), // Required
		Namespace:  aws.String("Namespace"),  // Required
		Period:     aws.Int64(1),             // Required
		StartTime:  aws.Time(time.Now()),     // Required
		Statistics: []*string{ // Required
			aws.String("Statistic"), // Required
			// More values...
		},
		Dimensions: []*cloudwatch.Dimension{
			{ // Required
				Name:  aws.String("DimensionName"),  // Required
				Value: aws.String("DimensionValue"), // Required
			},
			// More values...
		},
		Unit: aws.String("StandardUnit"),
	}
	resp, err := svc.GetMetricStatistics(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) GetMetricStatisticsRequest 

func (c *CloudWatch) GetMetricStatisticsRequest(input *GetMetricStatisticsInput) (req *aws.Request, output *GetMetricStatisticsOutput)

GetMetricStatisticsRequest generates a request for the GetMetricStatistics operation.

func (*CloudWatch) ListMetrics 

func (c *CloudWatch) ListMetrics(input *ListMetricsInput) (*ListMetricsOutput, error)

Returns a list of valid metrics stored for the AWS account owner. Returned metrics can be used with GetMetricStatistics to obtain statistical data for a given metric.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.ListMetricsInput{
		Dimensions: []*cloudwatch.DimensionFilter{
			{ // Required
				Name:  aws.String("DimensionName"), // Required
				Value: aws.String("DimensionValue"),
			},
			// More values...
		},
		MetricName: aws.String("MetricName"),
		Namespace:  aws.String("Namespace"),
		NextToken:  aws.String("NextToken"),
	}
	resp, err := svc.ListMetrics(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) ListMetricsPages 

func (c *CloudWatch) ListMetricsPages(input *ListMetricsInput, fn func(p *ListMetricsOutput, lastPage bool) (shouldContinue bool)) error

func (*CloudWatch) ListMetricsRequest 

func (c *CloudWatch) ListMetricsRequest(input *ListMetricsInput) (req *aws.Request, output *ListMetricsOutput)

ListMetricsRequest generates a request for the ListMetrics operation.

func (*CloudWatch) PutMetricAlarm 

func (c *CloudWatch) PutMetricAlarm(input *PutMetricAlarmInput) (*PutMetricAlarmOutput, error)

Creates or updates an alarm and associates it with the specified Amazon CloudWatch metric. Optionally, this operation can associate one or more Amazon Simple Notification Service resources with the alarm. 

When this operation creates an alarm, the alarm state is immediately set

to INSUFFICIENT_DATA. The alarm is evaluated and its StateValue is set appropriately. Any actions associated with the StateValue is then executed.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.PutMetricAlarmInput{
		AlarmName:          aws.String("AlarmName"),          // Required
		ComparisonOperator: aws.String("ComparisonOperator"), // Required
		EvaluationPeriods:  aws.Int64(1),                     // Required
		MetricName:         aws.String("MetricName"),         // Required
		Namespace:          aws.String("Namespace"),          // Required
		Period:             aws.Int64(1),                     // Required
		Statistic:          aws.String("Statistic"),          // Required
		Threshold:          aws.Float64(1.0),                 // Required
		ActionsEnabled:     aws.Bool(true),
		AlarmActions: []*string{
			aws.String("ResourceName"), // Required
			// More values...
		},
		AlarmDescription: aws.String("AlarmDescription"),
		Dimensions: []*cloudwatch.Dimension{
			{ // Required
				Name:  aws.String("DimensionName"),  // Required
				Value: aws.String("DimensionValue"), // Required
			},
			// More values...
		},
		InsufficientDataActions: []*string{
			aws.String("ResourceName"), // Required
			// More values...
		},
		OKActions: []*string{
			aws.String("ResourceName"), // Required
			// More values...
		},
		Unit: aws.String("StandardUnit"),
	}
	resp, err := svc.PutMetricAlarm(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) PutMetricAlarmRequest 

func (c *CloudWatch) PutMetricAlarmRequest(input *PutMetricAlarmInput) (req *aws.Request, output *PutMetricAlarmOutput)

PutMetricAlarmRequest generates a request for the PutMetricAlarm operation.

func (*CloudWatch) PutMetricData 

func (c *CloudWatch) PutMetricData(input *PutMetricDataInput) (*PutMetricDataOutput, error)

Publishes metric data points to Amazon CloudWatch. Amazon Cloudwatch associates the data points with the specified metric. If the specified metric does not exist, Amazon CloudWatch creates the metric. It can take up to fifteen minutes for a new metric to appear in calls to the ListMetrics action. 

The size of a PutMetricData request is limited to 8 KB for HTTP GET requests

and 40 KB for HTTP POST requests. 

Although the Value parameter accepts numbers of type Double, Amazon CloudWatch

truncates values with very large exponents. Values with base-10 exponents greater than 126 (1 x 10^126) are truncated. Likewise, values with base-10 exponents less than -130 (1 x 10^-130) are also truncated. Data that is timestamped 24 hours or more in the past may take in excess of 48 hours to become available from submission time using GetMetricStatistics.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.PutMetricDataInput{
		MetricData: []*cloudwatch.MetricDatum{ // Required
			{ // Required
				MetricName: aws.String("MetricName"), // Required
				Dimensions: []*cloudwatch.Dimension{
					{ // Required
						Name:  aws.String("DimensionName"),  // Required
						Value: aws.String("DimensionValue"), // Required
					},
					// More values...
				},
				StatisticValues: &cloudwatch.StatisticSet{
					Maximum:     aws.Float64(1.0), // Required
					Minimum:     aws.Float64(1.0), // Required
					SampleCount: aws.Float64(1.0), // Required
					Sum:         aws.Float64(1.0), // Required
				},
				Timestamp: aws.Time(time.Now()),
				Unit:      aws.String("StandardUnit"),
				Value:     aws.Float64(1.0),
			},
			// More values...
		},
		Namespace: aws.String("Namespace"), // Required
	}
	resp, err := svc.PutMetricData(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) PutMetricDataRequest 

func (c *CloudWatch) PutMetricDataRequest(input *PutMetricDataInput) (req *aws.Request, output *PutMetricDataOutput)

PutMetricDataRequest generates a request for the PutMetricData operation.

func (*CloudWatch) SetAlarmState 

func (c *CloudWatch) SetAlarmState(input *SetAlarmStateInput) (*SetAlarmStateOutput, error)

Temporarily sets the state of an alarm. When the updated StateValue differs from the previous value, the action configured for the appropriate state is invoked. This is not a permanent change. The next periodic alarm check (in about a minute) will set the alarm to its actual state.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/cloudwatch"
)

func main() {
	svc := cloudwatch.New(nil)

	params := &cloudwatch.SetAlarmStateInput{
		AlarmName:       aws.String("AlarmName"),   // Required
		StateReason:     aws.String("StateReason"), // Required
		StateValue:      aws.String("StateValue"),  // Required
		StateReasonData: aws.String("StateReasonData"),
	}
	resp, err := svc.SetAlarmState(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.Prettify(resp))
}

Output:

func (*CloudWatch) SetAlarmStateRequest 

func (c *CloudWatch) SetAlarmStateRequest(input *SetAlarmStateInput) (req *aws.Request, output *SetAlarmStateOutput)

SetAlarmStateRequest generates a request for the SetAlarmState operation.

type Datapoint 

type Datapoint struct {
	// The average of metric values that correspond to the datapoint.
	Average *float64 `type:"double"`

	// The maximum of the metric value used for the datapoint.
	Maximum *float64 `type:"double"`

	// The minimum metric value used for the datapoint.
	Minimum *float64 `type:"double"`

	// The number of metric values that contributed to the aggregate value of this
	// datapoint.
	SampleCount *float64 `type:"double"`

	// The sum of metric values used for the datapoint.
	Sum *float64 `type:"double"`

	// The time stamp used for the datapoint. Amazon CloudWatch uses Coordinated
	// Universal Time (UTC) when returning time stamps, which do not accommodate
	// seasonal adjustments such as daylight savings time. For more information,
	// see Time stamps (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/cloudwatch_concepts.html#about_timestamp)
	// in the Amazon CloudWatch Developer Guide.
	Timestamp *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The standard unit used for the datapoint.
	Unit *string `type:"string" enum:"StandardUnit"`
	// contains filtered or unexported fields
}

The Datapoint data type encapsulates the statistical data that Amazon CloudWatch computes from metric data.

func (Datapoint) GoString added in v0.6.5 

func (s Datapoint) GoString() string

GoString returns the string representation

func (Datapoint) String added in v0.6.5 

func (s Datapoint) String() string

String returns the string representation

type DeleteAlarmsInput 

type DeleteAlarmsInput struct {
	// A list of alarms to be deleted.
	AlarmNames []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (DeleteAlarmsInput) GoString added in v0.6.5 

func (s DeleteAlarmsInput) GoString() string

GoString returns the string representation

func (DeleteAlarmsInput) String added in v0.6.5 

func (s DeleteAlarmsInput) String() string

String returns the string representation

type DeleteAlarmsOutput 

type DeleteAlarmsOutput struct {
	// contains filtered or unexported fields
}

func (DeleteAlarmsOutput) GoString added in v0.6.5 

func (s DeleteAlarmsOutput) GoString() string

GoString returns the string representation

func (DeleteAlarmsOutput) String added in v0.6.5 

func (s DeleteAlarmsOutput) String() string

String returns the string representation

type DescribeAlarmHistoryInput 

type DescribeAlarmHistoryInput struct {
	// The name of the alarm.
	AlarmName *string `type:"string"`

	// The ending date to retrieve alarm history.
	EndDate *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The type of alarm histories to retrieve.
	HistoryItemType *string `type:"string" enum:"HistoryItemType"`

	// The maximum number of alarm history records to retrieve.
	MaxRecords *int64 `type:"integer"`

	// The token returned by a previous call to indicate that there is more data
	// available.
	NextToken *string `type:"string"`

	// The starting date to retrieve alarm history.
	StartDate *time.Time `type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

func (DescribeAlarmHistoryInput) GoString added in v0.6.5 

func (s DescribeAlarmHistoryInput) GoString() string

GoString returns the string representation

func (DescribeAlarmHistoryInput) String added in v0.6.5 

func (s DescribeAlarmHistoryInput) String() string

String returns the string representation

type DescribeAlarmHistoryOutput 

type DescribeAlarmHistoryOutput struct {
	// A list of alarm histories in JSON format.
	AlarmHistoryItems []*AlarmHistoryItem `type:"list"`

	// A string that marks the start of the next batch of returned results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

The output for the DescribeAlarmHistory action.

func (DescribeAlarmHistoryOutput) GoString added in v0.6.5 

func (s DescribeAlarmHistoryOutput) GoString() string

GoString returns the string representation

func (DescribeAlarmHistoryOutput) String added in v0.6.5 

func (s DescribeAlarmHistoryOutput) String() string

String returns the string representation

type DescribeAlarmsForMetricInput 

type DescribeAlarmsForMetricInput struct {
	// The list of dimensions associated with the metric.
	Dimensions []*Dimension `type:"list"`

	// The name of the metric.
	MetricName *string `type:"string" required:"true"`

	// The namespace of the metric.
	Namespace *string `type:"string" required:"true"`

	// The period in seconds over which the statistic is applied.
	Period *int64 `type:"integer"`

	// The statistic for the metric.
	Statistic *string `type:"string" enum:"Statistic"`

	// The unit for the metric.
	Unit *string `type:"string" enum:"StandardUnit"`
	// contains filtered or unexported fields
}

func (DescribeAlarmsForMetricInput) GoString added in v0.6.5 

func (s DescribeAlarmsForMetricInput) GoString() string

GoString returns the string representation

func (DescribeAlarmsForMetricInput) String added in v0.6.5 

func (s DescribeAlarmsForMetricInput) String() string

String returns the string representation

type DescribeAlarmsForMetricOutput 

type DescribeAlarmsForMetricOutput struct {
	// A list of information for each alarm with the specified metric.
	MetricAlarms []*MetricAlarm `type:"list"`
	// contains filtered or unexported fields
}

The output for the DescribeAlarmsForMetric action.

func (DescribeAlarmsForMetricOutput) GoString added in v0.6.5 

func (s DescribeAlarmsForMetricOutput) GoString() string

GoString returns the string representation

func (DescribeAlarmsForMetricOutput) String added in v0.6.5 

func (s DescribeAlarmsForMetricOutput) String() string

String returns the string representation

type DescribeAlarmsInput 

type DescribeAlarmsInput struct {
	// The action name prefix.
	ActionPrefix *string `type:"string"`

	// The alarm name prefix. AlarmNames cannot be specified if this parameter is
	// specified.
	AlarmNamePrefix *string `type:"string"`

	// A list of alarm names to retrieve information for.
	AlarmNames []*string `type:"list"`

	// The maximum number of alarm descriptions to retrieve.
	MaxRecords *int64 `type:"integer"`

	// The token returned by a previous call to indicate that there is more data
	// available.
	NextToken *string `type:"string"`

	// The state value to be used in matching alarms.
	StateValue *string `type:"string" enum:"StateValue"`
	// contains filtered or unexported fields
}

func (DescribeAlarmsInput) GoString added in v0.6.5 

func (s DescribeAlarmsInput) GoString() string

GoString returns the string representation

func (DescribeAlarmsInput) String added in v0.6.5 

func (s DescribeAlarmsInput) String() string

String returns the string representation

type DescribeAlarmsOutput 

type DescribeAlarmsOutput struct {
	// A list of information for the specified alarms.
	MetricAlarms []*MetricAlarm `type:"list"`

	// A string that marks the start of the next batch of returned results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

The output for the DescribeAlarms action.

func (DescribeAlarmsOutput) GoString added in v0.6.5 

func (s DescribeAlarmsOutput) GoString() string

GoString returns the string representation

func (DescribeAlarmsOutput) String added in v0.6.5 

func (s DescribeAlarmsOutput) String() string

String returns the string representation

type Dimension 

type Dimension struct {
	// The name of the dimension.
	Name *string `type:"string" required:"true"`

	// The value representing the dimension measurement
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

The Dimension data type further expands on the identity of a metric using a Name, Value pair.

For examples that use one or more dimensions, see PutMetricData.

func (Dimension) GoString added in v0.6.5 

func (s Dimension) GoString() string

GoString returns the string representation

func (Dimension) String added in v0.6.5 

func (s Dimension) String() string

String returns the string representation

type DimensionFilter 

type DimensionFilter struct {
	// The dimension name to be matched.
	Name *string `type:"string" required:"true"`

	// The value of the dimension to be matched.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

The DimensionFilter data type is used to filter ListMetrics results.

func (DimensionFilter) GoString added in v0.6.5 

func (s DimensionFilter) GoString() string

GoString returns the string representation

func (DimensionFilter) String added in v0.6.5 

func (s DimensionFilter) String() string

String returns the string representation

type DisableAlarmActionsInput 

type DisableAlarmActionsInput struct {
	// The names of the alarms to disable actions for.
	AlarmNames []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (DisableAlarmActionsInput) GoString added in v0.6.5 

func (s DisableAlarmActionsInput) GoString() string

GoString returns the string representation

func (DisableAlarmActionsInput) String added in v0.6.5 

func (s DisableAlarmActionsInput) String() string

String returns the string representation

type DisableAlarmActionsOutput 

type DisableAlarmActionsOutput struct {
	// contains filtered or unexported fields
}

func (DisableAlarmActionsOutput) GoString added in v0.6.5 

func (s DisableAlarmActionsOutput) GoString() string

GoString returns the string representation

func (DisableAlarmActionsOutput) String added in v0.6.5 

func (s DisableAlarmActionsOutput) String() string

String returns the string representation

type EnableAlarmActionsInput 

type EnableAlarmActionsInput struct {
	// The names of the alarms to enable actions for.
	AlarmNames []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (EnableAlarmActionsInput) GoString added in v0.6.5 

func (s EnableAlarmActionsInput) GoString() string

GoString returns the string representation

func (EnableAlarmActionsInput) String added in v0.6.5 

func (s EnableAlarmActionsInput) String() string

String returns the string representation

type EnableAlarmActionsOutput 

type EnableAlarmActionsOutput struct {
	// contains filtered or unexported fields
}

func (EnableAlarmActionsOutput) GoString added in v0.6.5 

func (s EnableAlarmActionsOutput) GoString() string

GoString returns the string representation

func (EnableAlarmActionsOutput) String added in v0.6.5 

func (s EnableAlarmActionsOutput) String() string

String returns the string representation

type GetMetricStatisticsInput 

type GetMetricStatisticsInput struct {
	// A list of dimensions describing qualities of the metric.
	Dimensions []*Dimension `type:"list"`

	// The time stamp to use for determining the last datapoint to return. The value
	// specified is exclusive; results will include datapoints up to the time stamp
	// specified.
	EndTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`

	// The name of the metric, with or without spaces.
	MetricName *string `type:"string" required:"true"`

	// The namespace of the metric, with or without spaces.
	Namespace *string `type:"string" required:"true"`

	// The granularity, in seconds, of the returned datapoints. Period must be at
	// least 60 seconds and must be a multiple of 60. The default value is 60.
	Period *int64 `type:"integer" required:"true"`

	// The time stamp to use for determining the first datapoint to return. The
	// value specified is inclusive; results include datapoints with the time stamp
	// specified.
	StartTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`

	// The metric statistics to return. For information about specific statistics
	// returned by GetMetricStatistics, go to Statistics (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/index.html?CHAP_TerminologyandKeyConcepts.html#Statistic)
	// in the Amazon CloudWatch Developer Guide.
	//
	//  Valid Values: Average | Sum | SampleCount | Maximum | Minimum
	Statistics []*string `type:"list" required:"true"`

	// The unit for the metric.
	Unit *string `type:"string" enum:"StandardUnit"`
	// contains filtered or unexported fields
}

func (GetMetricStatisticsInput) GoString added in v0.6.5 

func (s GetMetricStatisticsInput) GoString() string

GoString returns the string representation

func (GetMetricStatisticsInput) String added in v0.6.5 

func (s GetMetricStatisticsInput) String() string

String returns the string representation

type GetMetricStatisticsOutput 

type GetMetricStatisticsOutput struct {
	// The datapoints for the specified metric.
	Datapoints []*Datapoint `type:"list"`

	// A label describing the specified metric.
	Label *string `type:"string"`
	// contains filtered or unexported fields
}

The output for the GetMetricStatistics action.

func (GetMetricStatisticsOutput) GoString added in v0.6.5 

func (s GetMetricStatisticsOutput) GoString() string

GoString returns the string representation

func (GetMetricStatisticsOutput) String added in v0.6.5 

func (s GetMetricStatisticsOutput) String() string

String returns the string representation

type ListMetricsInput 

type ListMetricsInput struct {
	// A list of dimensions to filter against.
	Dimensions []*DimensionFilter `type:"list"`

	// The name of the metric to filter against.
	MetricName *string `type:"string"`

	// The namespace to filter against.
	Namespace *string `type:"string"`

	// The token returned by a previous call to indicate that there is more data
	// available.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

func (ListMetricsInput) GoString added in v0.6.5 

func (s ListMetricsInput) GoString() string

GoString returns the string representation

func (ListMetricsInput) String added in v0.6.5 

func (s ListMetricsInput) String() string

String returns the string representation

type ListMetricsOutput 

type ListMetricsOutput struct {
	// A list of metrics used to generate statistics for an AWS account.
	Metrics []*Metric `type:"list"`

	// A string that marks the start of the next batch of returned results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

The output for the ListMetrics action.

func (ListMetricsOutput) GoString added in v0.6.5 

func (s ListMetricsOutput) GoString() string

GoString returns the string representation

func (ListMetricsOutput) String added in v0.6.5 

func (s ListMetricsOutput) String() string

String returns the string representation

type Metric 

type Metric struct {
	// A list of dimensions associated with the metric.
	Dimensions []*Dimension `type:"list"`

	// The name of the metric.
	MetricName *string `type:"string"`

	// The namespace of the metric.
	Namespace *string `type:"string"`
	// contains filtered or unexported fields
}

The Metric data type contains information about a specific metric. If you call ListMetrics, Amazon CloudWatch returns information contained by this data type. 

The example in the Examples section publishes two metrics named buffers

and latency. Both metrics are in the examples namespace. Both metrics have two dimensions, InstanceID and InstanceType.

func (Metric) GoString added in v0.6.5 

func (s Metric) GoString() string

GoString returns the string representation

func (Metric) String added in v0.6.5 

func (s Metric) String() string

String returns the string representation

type MetricAlarm 

type MetricAlarm struct {
	// Indicates whether actions should be executed during any changes to the alarm's
	// state.
	ActionsEnabled *bool `type:"boolean"`

	// The Amazon Resource Name (ARN) of the alarm.
	AlarmARN *string `locationName:"AlarmArn" type:"string"`

	// The list of actions to execute when this alarm transitions into an ALARM
	// state from any other state. Each action is specified as an Amazon Resource
	// Number (ARN). Currently the only actions supported are publishing to an Amazon
	// SNS topic and triggering an Auto Scaling policy.
	AlarmActions []*string `type:"list"`

	// The time stamp of the last update to the alarm configuration. Amazon CloudWatch
	// uses Coordinated Universal Time (UTC) when returning time stamps, which do
	// not accommodate seasonal adjustments such as daylight savings time. For more
	// information, see Time stamps (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/cloudwatch_concepts.html#about_timestamp)
	// in the Amazon CloudWatch Developer Guide.
	AlarmConfigurationUpdatedTimestamp *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The description for the alarm.
	AlarmDescription *string `type:"string"`

	// The name of the alarm.
	AlarmName *string `type:"string"`

	// The arithmetic operation to use when comparing the specified Statistic and
	// Threshold. The specified Statistic value is used as the first operand.
	ComparisonOperator *string `type:"string" enum:"ComparisonOperator"`

	// The list of dimensions associated with the alarm's associated metric.
	Dimensions []*Dimension `type:"list"`

	// The number of periods over which data is compared to the specified threshold.
	EvaluationPeriods *int64 `type:"integer"`

	// The list of actions to execute when this alarm transitions into an INSUFFICIENT_DATA
	// state from any other state. Each action is specified as an Amazon Resource
	// Number (ARN). Currently the only actions supported are publishing to an Amazon
	// SNS topic or triggering an Auto Scaling policy.
	//
	// The current WSDL lists this attribute as UnknownActions.
	InsufficientDataActions []*string `type:"list"`

	// The name of the alarm's metric.
	MetricName *string `type:"string"`

	// The namespace of alarm's associated metric.
	Namespace *string `type:"string"`

	// The list of actions to execute when this alarm transitions into an OK state
	// from any other state. Each action is specified as an Amazon Resource Number
	// (ARN). Currently the only actions supported are publishing to an Amazon SNS
	// topic and triggering an Auto Scaling policy.
	OKActions []*string `type:"list"`

	// The period in seconds over which the statistic is applied.
	Period *int64 `type:"integer"`

	// A human-readable explanation for the alarm's state.
	StateReason *string `type:"string"`

	// An explanation for the alarm's state in machine-readable JSON format
	StateReasonData *string `type:"string"`

	// The time stamp of the last update to the alarm's state. Amazon CloudWatch
	// uses Coordinated Universal Time (UTC) when returning time stamps, which do
	// not accommodate seasonal adjustments such as daylight savings time. For more
	// information, see Time stamps (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/cloudwatch_concepts.html#about_timestamp)
	// in the Amazon CloudWatch Developer Guide.
	StateUpdatedTimestamp *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The state value for the alarm.
	StateValue *string `type:"string" enum:"StateValue"`

	// The statistic to apply to the alarm's associated metric.
	Statistic *string `type:"string" enum:"Statistic"`

	// The value against which the specified statistic is compared.
	Threshold *float64 `type:"double"`

	// The unit of the alarm's associated metric.
	Unit *string `type:"string" enum:"StandardUnit"`
	// contains filtered or unexported fields
}

The MetricAlarm data type represents an alarm. You can use PutMetricAlarm to create or update an alarm.

func (MetricAlarm) GoString added in v0.6.5 

func (s MetricAlarm) GoString() string

GoString returns the string representation

func (MetricAlarm) String added in v0.6.5 

func (s MetricAlarm) String() string

String returns the string representation

type MetricDatum 

type MetricDatum struct {
	// A list of dimensions associated with the metric. Note, when using the Dimensions
	// value in a query, you need to append .member.N to it (e.g., Dimensions.member.N).
	Dimensions []*Dimension `type:"list"`

	// The name of the metric.
	MetricName *string `type:"string" required:"true"`

	// A set of statistical values describing the metric.
	StatisticValues *StatisticSet `type:"structure"`

	// The time stamp used for the metric. If not specified, the default value is
	// set to the time the metric data was received. Amazon CloudWatch uses Coordinated
	// Universal Time (UTC) when returning time stamps, which do not accommodate
	// seasonal adjustments such as daylight savings time. For more information,
	// see Time stamps (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/cloudwatch_concepts.html#about_timestamp)
	// in the Amazon CloudWatch Developer Guide.
	Timestamp *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The unit of the metric.
	Unit *string `type:"string" enum:"StandardUnit"`

	// The value for the metric.
	//
	// Although the Value parameter accepts numbers of type Double, Amazon CloudWatch
	// truncates values with very large exponents. Values with base-10 exponents
	// greater than 126 (1 x 10^126) are truncated. Likewise, values with base-10
	// exponents less than -130 (1 x 10^-130) are also truncated.
	Value *float64 `type:"double"`
	// contains filtered or unexported fields
}

The MetricDatum data type encapsulates the information sent with PutMetricData to either create a new metric or add new values to be aggregated into an existing metric.

func (MetricDatum) GoString added in v0.6.5 

func (s MetricDatum) GoString() string

GoString returns the string representation

func (MetricDatum) String added in v0.6.5 

func (s MetricDatum) String() string

String returns the string representation

type PutMetricAlarmInput 

type PutMetricAlarmInput struct {
	// Indicates whether or not actions should be executed during any changes to
	// the alarm's state.
	ActionsEnabled *bool `type:"boolean"`

	// The list of actions to execute when this alarm transitions into an ALARM
	// state from any other state. Each action is specified as an Amazon Resource
	// Number (ARN). Currently the only action supported is publishing to an Amazon
	// SNS topic or an Amazon Auto Scaling policy.
	AlarmActions []*string `type:"list"`

	// The description for the alarm.
	AlarmDescription *string `type:"string"`

	// The descriptive name for the alarm. This name must be unique within the user's
	// AWS account
	AlarmName *string `type:"string" required:"true"`

	// The arithmetic operation to use when comparing the specified Statistic and
	// Threshold. The specified Statistic value is used as the first operand.
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`

	// The dimensions for the alarm's associated metric.
	Dimensions []*Dimension `type:"list"`

	// The number of periods over which data is compared to the specified threshold.
	EvaluationPeriods *int64 `type:"integer" required:"true"`

	// The list of actions to execute when this alarm transitions into an INSUFFICIENT_DATA
	// state from any other state. Each action is specified as an Amazon Resource
	// Number (ARN). Currently the only action supported is publishing to an Amazon
	// SNS topic or an Amazon Auto Scaling policy.
	InsufficientDataActions []*string `type:"list"`

	// The name for the alarm's associated metric.
	MetricName *string `type:"string" required:"true"`

	// The namespace for the alarm's associated metric.
	Namespace *string `type:"string" required:"true"`

	// The list of actions to execute when this alarm transitions into an OK state
	// from any other state. Each action is specified as an Amazon Resource Number
	// (ARN). Currently the only action supported is publishing to an Amazon SNS
	// topic or an Amazon Auto Scaling policy.
	OKActions []*string `type:"list"`

	// The period in seconds over which the specified statistic is applied.
	Period *int64 `type:"integer" required:"true"`

	// The statistic to apply to the alarm's associated metric.
	Statistic *string `type:"string" required:"true" enum:"Statistic"`

	// The value against which the specified statistic is compared.
	Threshold *float64 `type:"double" required:"true"`

	// The unit for the alarm's associated metric.
	Unit *string `type:"string" enum:"StandardUnit"`
	// contains filtered or unexported fields
}

func (PutMetricAlarmInput) GoString added in v0.6.5 

func (s PutMetricAlarmInput) GoString() string

GoString returns the string representation

func (PutMetricAlarmInput) String added in v0.6.5 

func (s PutMetricAlarmInput) String() string

String returns the string representation

type PutMetricAlarmOutput 

type PutMetricAlarmOutput struct {
	// contains filtered or unexported fields
}

func (PutMetricAlarmOutput) GoString added in v0.6.5 

func (s PutMetricAlarmOutput) GoString() string

GoString returns the string representation

func (PutMetricAlarmOutput) String added in v0.6.5 

func (s PutMetricAlarmOutput) String() string

String returns the string representation

type PutMetricDataInput 

type PutMetricDataInput struct {
	// A list of data describing the metric.
	MetricData []*MetricDatum `type:"list" required:"true"`

	// The namespace for the metric data.
	Namespace *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (PutMetricDataInput) GoString added in v0.6.5 

func (s PutMetricDataInput) GoString() string

GoString returns the string representation

func (PutMetricDataInput) String added in v0.6.5 

func (s PutMetricDataInput) String() string

String returns the string representation

type PutMetricDataOutput 

type PutMetricDataOutput struct {
	// contains filtered or unexported fields
}

func (PutMetricDataOutput) GoString added in v0.6.5 

func (s PutMetricDataOutput) GoString() string

GoString returns the string representation

func (PutMetricDataOutput) String added in v0.6.5 

func (s PutMetricDataOutput) String() string

String returns the string representation

type SetAlarmStateInput 

type SetAlarmStateInput struct {
	// The descriptive name for the alarm. This name must be unique within the user's
	// AWS account. The maximum length is 255 characters.
	AlarmName *string `type:"string" required:"true"`

	// The reason that this alarm is set to this specific state (in human-readable
	// text format)
	StateReason *string `type:"string" required:"true"`

	// The reason that this alarm is set to this specific state (in machine-readable
	// JSON format)
	StateReasonData *string `type:"string"`

	// The value of the state.
	StateValue *string `type:"string" required:"true" enum:"StateValue"`
	// contains filtered or unexported fields
}

func (SetAlarmStateInput) GoString added in v0.6.5 

func (s SetAlarmStateInput) GoString() string

GoString returns the string representation

func (SetAlarmStateInput) String added in v0.6.5 

func (s SetAlarmStateInput) String() string

String returns the string representation

type SetAlarmStateOutput 

type SetAlarmStateOutput struct {
	// contains filtered or unexported fields
}

func (SetAlarmStateOutput) GoString added in v0.6.5 

func (s SetAlarmStateOutput) GoString() string

GoString returns the string representation

func (SetAlarmStateOutput) String added in v0.6.5 

func (s SetAlarmStateOutput) String() string

String returns the string representation

type StatisticSet 

type StatisticSet struct {
	// The maximum value of the sample set.
	Maximum *float64 `type:"double" required:"true"`

	// The minimum value of the sample set.
	Minimum *float64 `type:"double" required:"true"`

	// The number of samples used for the statistic set.
	SampleCount *float64 `type:"double" required:"true"`

	// The sum of values for the sample set.
	Sum *float64 `type:"double" required:"true"`
	// contains filtered or unexported fields
}

The StatisticSet data type describes the StatisticValues component of MetricDatum, and represents a set of statistics that describes a specific metric.

func (StatisticSet) GoString added in v0.6.5 

func (s StatisticSet) GoString() string

GoString returns the string representation

func (StatisticSet) String added in v0.6.5 

func (s StatisticSet) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package cloudwatchiface provides an interface for the Amazon CloudWatch.
 Package cloudwatchiface provides an interface for the Amazon CloudWatch.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.