gactar

README

gactar

gactar is a tool for creating and running ACT-R models using a declarative file format called amod.

You can read the tech note gactar: A Tool For Exploring ACT-R Modelling here.

Table of Contents

• Proof-of-Concept
  • What isn't implemented?
• Quickstart
  • Requirements
  • Install
  • Run
• Why gactar?
• Design Goals
• Contributing
• Installation
  • Download gactar Release
  • Setup
• Checking Your Setup For Errors
• Running gactar
  • Run With Visual Studio Code
  • Run As Web Server
  • Run With Command Line Interface
  • Run With Interactive Command Line Interface
• Build/Develop
• Test
• Web API
• gactar Models
  • amod Syntax
  • Config Section
  • Buffers
  • Chunks
  • Productions
  • Example Production #1
  • Example Production #2
• amod Processing
• Reference

---

Proof-of-Concept

This is a proof-of-concept.

Currently, gactar will take an amod file and generate code to run it on three different ACT-R implementations:

• pyactr (Python)
• python_actr (Python) - a.k.a. ccm
• ACT-R (Lisp) - a.k.a. vanilla

Naming note: When gactar was written, the python_actr implementation came from CCMSuite3 and was referred to throughout gactar as ccm. Instead of changing everything to refer to python_actr I've decided to leave it as ccm. This helps avoid confusion between python_actr and pyactr.

gactar will work with the tutorial models included in the examples directory. It doesn't handle a lot beyond what's in there - it only works with memory modules, not perceptual-motor ones, and does not yet work with environments - so it's limited at the moment.

Given that gactar in its early stages, the amod syntax may change dramatically based on use and feedback.

Note for Windows users: I have only done limited building/testing on Windows. If you try it and have problems, please open an issue.

What isn't implemented?

A lot! The big, obvious one is environments (and therefore the visual & motor modules). That's a big challenge and probably not worth tackling if there isn't sufficient interest in this initial proof of concept. Environments may even prove impossible given the way they are implemented in the three frameworks, but I haven't yet explored this too deeply.

If there is sufficient interest in this project, my strategy going forward would be to continue implementing examples included with the three implementations, adding capabilities as necessary and, when the implementations differ, raising issues for discussion. Once all the non-environment capabilities are implemented, then I would turn to the environment issue.

Quickstart

There are more details on each step below, but here's the short version:

Requirements

1. Access to a command line interface (cli) to run gactar. Generally something bash-compatible will work best.

   • macOS: Terminal or iTerm
   • Linux: it is a command line interface
   • Windows: Git Bash or cygwin or Powershell (? not sure which ones work)

2. python 3 is required by two of the frameworks (ccm & pyactr). More about Python installation here.

Install

1. Download the latest release for your platform & architecture and decompress the file.

   • arm64 if you have an ARM processor (e.g. Apple's M1)
   • amd64 otherwise

2. (optional) Rename the folder that was just created (e.g. gactar-v0.x-macOS-amd64) to something shorter (e.g. gactar):

   mv gactar-v0.x-macOS-amd64 gactar

3. In your command line interface, change to the folder :

   cd gactar-v0.x-macOS-amd64

   OR

   cd gactar (if you did step 2)

4. Run the set up tool:

   ./gactar env setup

For more details, see below.

Run

1. Run gactar:

   ./gactar -w

2. Open your browser to the URL it outputs (e.g. http://localhost:8181)

For more details and other options for running gactar, see below.

Why gactar?

1. Provides a human-readable, easy-to-understand, standard format to define basic ACT-R models.
2. Abstracts away the "programming" to focus on writing & understanding models.
3. Restricts the model to a small language to prevent programming "outside the model" (no sneaking in extra calculations or control-flow!).
4. Runs the same model on multiple ACT-R implementation frameworks so the output may be compared.
5. Generates human-readable code with comments linking back to the amod file which is useful for learning the implementations and comparing them.
6. Provides a very simple setup for teaching environments - gactar is self-contained in one executable and downloads the implementation frameworks itself.
7. Allows the easy exchange of models with other researchers
8. Opens up the possibility of a library of models which will run on multiple implementation frameworks.

Design Goals

1. amod syntax & semantics should be designed for humans to read & understand (i.e. it should not require a programming background to grok).
2. amod should only provide one way to perform each action - this helps when reading someone else's code and keeps the parser as simple as possible.
3. amod should only include functionality which is available on all implementation frameworks.
4. gactar should be as simple as possible to set up, use, and understand.

Contributing

For information on how to contribute (code, bug reports, ideas, or other resources), please see the CONTRIBUTING doc.

Installation

1. Access to a command line interface (cli) is required to run gactar. Generally something bash-compatible will work best.

   • macOS: Terminal or iTerm
   • Linux: it is a command line interface
   • Windows: Git Bash or cygwin or Powershell (? not sure which ones work)

2. python 3 is required by two of the frameworks (ccm & pyactr). More about Python installation here.

3. gactar requires that one or more of the three implementations (ccm, pyactr, vanilla) is installed. ccm and pyactr are both Python-based and will be installed using pip (if Python is available). vanilla requires a Lisp compiler which will be installed by the setup command.

gactar uses a virtual environment to keep all the required Python packages, Lisp files, and other implementation files in one place so it does not affect the rest of your system. For more information about the Python virtual environment see the python docs.

Download gactar Release

1. Download the latest release for your platform & architecture and decompress the file.

   • arm64 if you have an ARM processor (e.g. Apple's M1)
   • amd64 otherwise

2. You should end up with a folder named something like gactar-v<version>-<platform>-<architecture> (e.g. gactar-v0.8.0-macOS-amd64) containing the following files & folders:

   CHANGELOG.md	describes changes between versions
   CITATION.cff	citation information in cff format
   CONTRIBUTING.md	how to contribute to the project - financially & otherwise
   doc/	folder containing extra documentation
   gactar	the executable
   examples/	folder containing the examples
   install/	folder containing Python package information used for setup
   LICENSE	the license
   README.md	this readme file

Setup

Setup is handled using the gactar env setup command.

USAGE:
   gactar env setup [command options] [arguments...]

OPTIONS:
   --dev                   install any dev packages (default: false)
   --path value, -p value  directory for env files (it will be created if it does not exist) (default: "./env")

For basic setup, run ./gactar env setup

This will do several things to set up your environment:

• create a virtual environment for the project in a directory called env
• install pyactr and python_actr using pip
• download the vanilla ACT-R Lisp code
• download the Clozure Common Lisp compiler (ccl) compiler

Use the -dev flag to also install optional developer packages for linting & formatting Python code.

$ ./gactar env setup -dev

If you want to change the default environment (env), the directory can be specified using the -path option:

./gactar env setup -path foo

Note: If you change the path, you will need to specify -env foo each time you run gactar.

Checking Your Setup For Errors

To run a health check on your virtual environment, run:

./gactar env doctor

To check a specific virtual environment, you can pass its path:

./gactar env doctor -path foo

This command will run several checks on your environment and report any warnings or errors.

Running gactar

The following assumes you have set up your virtual environment properly. See setup above.

There are four different ways to use gactar depending on your needs:

1. In Visual Studio Code using the gactar extension.
2. With a UI locally in a web browser.
3. Using a command line interface.
4. Using an interactive command line interface.

Command Line

To run it using methods 2-4, here are the command line options:

gactar [GLOBAL OPTIONS] command [COMMAND OPTIONS] [ARGUMENTS...]

GLOBAL OPTIONS

--debug, -d: turn on debugging output

--ebnf: output amod EBNF to stdout and quit

--env [path]: directory where ACT-R, pyactr, and other necessary files are installed (default: ./env)

--framework, -f [string]: add framework - valid frameworks: all, ccm, pyactr, vanilla (default: all)

--interactive, -i: run an interactive shell

--port, -p [number]: port to run the web server on (default: 8181)

--run, -r: run the models after generating the code

--temp [path]: directory for generated files (it will be created if it does not exist) (default: {env}/gactar-temp)

--web, -w: start a web server to run in a browser

1. Run With Visual Studio Code

I have created a Visual Studio Code extension called gactar-vscode to provide amod syntax highlighting, code snippets, and a command to run gactar.

The extension is published on the VS Code marketplace, so you can install it from within VS Code:

1. Run VS Code.
2. Go to the extensions and search for gactar.
3. Click the Install button on the gactar extension.
4. Details about using it may be found on the VS Code extension page.

The source code for gactar-vscode may be found here.

2. Run As Web Server

gactar includes a web server and can use your browser as its user interface.

(env)$ ./gactar -w
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
pyactr: Using Python 3.10.4
vanilla: Using Version 1.12.1 (v1.12.1) DarwinX8664
Serving gactar on http://localhost:8181

Opening http://localhost:8181 in your browser will let you load, edit, and save amod files, and run them on the implementation frameworks. The page already has an example model loaded, so you can run it by clicking Run. You can also:

• select another example using the Load Example button
• modify the amod code in the editor
• Save the amod code to a file
• Load the amod code from a file
• choose which frameworks to run under Select Frameworks
• set a Goal to override the default goal in the amod file
• once it's been run, browse the generated code using the tabs at the top of the code editor

The results (and any errors) will be shown on the right and the generated code that was used to run the model on each framework is shown in the editor tabs.

Important Note: This web server is only intended to be run locally. It should not be used to expose gactar to the internet. Because we are running code, a lot more checking and validation of inputs would be required before doing so.

3. Run With Command Line Interface

This will generate code for all active frameworks and optionally run the models.

(env)$ ./gactar examples/count.amod
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
pyactr: Using Python 3.10.4
vanilla: Using Version 1.12.1 (v1.12.1) DarwinX8664
Intermediate file path: "/path/to/gactar/env/gactar-temp"
Generating model for examples/count.amod
INFO: initial goal is [countFrom: 2 5 starting]
 ccm
	- generating code for examples/count.amod
	- written to gactar-temp/ccm_count.py
 pyactr
	- generating code for examples/count.amod
	- written to gactar-temp/pyactr_count.py
 vanilla
	- generating code for examples/count.amod
	- written to gactar-temp/vanilla_count.lisp

You can choose which frameworks to use with -framework or -f like this:

(env)$ ./gactar -f ccm -f vanilla examples/count.amod
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
vanilla: Using Version 1.12.1 (v1.12.1) DarwinX8664
Intermediate file path: "/path/to/gactar/env/gactar-temp"
Generating model for examples/count.amod
INFO: initial goal is [countFrom: 2 5 starting]
 ccm
	- generating code for examples/count.amod
	- written to gactar-temp/ccm_count.py
 vanilla
	- generating code for examples/count.amod
	- written to gactar-temp/vanilla_count.lisp

You can write the files to a different location using -temp:

(env)$ ./gactar -f ccm -temp intermediate examples/count.amod
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
Intermediate file path: "/path/to/gactar/env/gactar-temp"
Generating model for examples/count.amod
INFO: initial goal is [countFrom: 2 5 starting]
 ccm
	- generating code for examples/count.amod
	- written to intermediate/ccm_count.py

You can also choose to run the models using -run or -r:

(env)$ ./gactar -f ccm -temp intermediate -r examples/count.amod
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
Intermediate file path: "/path/to/gactar/env/gactar-temp"
Generating model for examples/count.amod
INFO: initial goal is [countFrom: 2 5 starting]
 ccm
	- generating code for examples/count.amod
	- written to intermediate/ccm_count.py
== ccm ==
   0.000 production_match_delay 0
   0.000 production_threshold None
   0.000 production_time 0.05
   0.000 production_time_sd None
   0.000 memory.error False
   ...
end...

4. Run With Interactive Command Line Interface

gactar provides a simple interactive command-line mode to load and run models.

(env)$ ./gactar -i
gactar version v0.9.0
Using virtual environment: "/path/to/gactar/env"
ccm: Using Python 3.10.4
pyactr: Using Python 3.10.4
vanilla: Using Version 1.12.1 (v1.12.1) DarwinX8664
Type 'help' for a list of commands.
To exit, type 'exit' or 'quit'.
> help
  exit:        exits the program
  frameworks:  choose frameworks to run (e.g. "ccm pyactr", "all")
  help:        exits the program
  history:     outputs your command history
  load:        loads a model: load [FILENAME]
  quit:        exits the program
  reset:       resets the current model
  run:         runs the current model: run [INITIAL STATE]
  version:     outputs version info
> load examples/count.amod
 model loaded
 examples:
       run [countFrom: 2 5 starting]
       run [countFrom: 1 7 starting]
> frameworks ccm
active frameworks: ccm
> run [countFrom: 2 4 starting]
   0.000 production_match_delay 0
   0.000 production_threshold None
   0.000 production_time 0.05
   0.000 production_time_sd None
   0.000 memory.error False
   0.000 memory.busy False
   0.000 memory.latency 0.05
   0.000 memory.threshold 0
   0.000 memory.maximum_time 10.0
   0.000 memory.record_all_chunks False
   0.000 retrieval.chunk None
   0.050 production None
   0.050 memory.busy True
   0.050 goal.chunk countFrom 2 4 counting
   0.100 retrieval.chunk count 2 3
   0.100 memory.busy False
   0.100 production increment
   0.150 production None
2
   0.150 memory.busy True
   0.150 goal.chunk countFrom 3 4 counting
   0.200 retrieval.chunk count 3 4
   0.200 memory.busy False
   0.200 production increment
   0.250 production None
3
   0.250 memory.busy True
   0.250 goal.chunk countFrom 4 4 counting
   0.250 production stop
   0.300 retrieval.chunk count 4 5
   0.300 memory.busy False
   0.300 production None
4
   0.300 goal.chunk None
Total time:    3.250
 goal.chunk None
 memory.busy False
 memory.error False
 memory.latency 0.05
 memory.maximum_time 10.0
 memory.record_all_chunks False
 memory.threshold 0
 production None
 production_match_delay 0
 production_threshold None
 production_time 0.05
 production_time_sd None
 retrieval.chunk count 4 5
end...
> exit

You may choose which of the frameworks to run using the frameworks command.

Specifying frameworks on the command line will limit you to selecting those frameworks. For example this will make only ccm available in interactive mode:

./gactar -f ccm -i

Build/Develop

If you want to build gactar from scratch, you will need git, make, and the go compiler installed for your platform.

Then you just need to clone this repository:

git clone https://github.com/asmaloney/gactar
cd gactar

...and run make:

make

This will create the gactar executable.

See the web README for information on developing the web interface.

Test

To run the built-in tests, from the top-level of the repo run:

go test ./...

Web API

gactar provides an HTTP-based API to compile and run amod files. The available endpoints are documented separately in the Web API documentation.

gactar Models

gactar models are written using the amod format which is designed to be an easy-to-understand description of an ACT-R model.

Here is an example of a gactar model:

~~ model ~~

// The name of the model (used when generating code and for error messages)
name: count

// Description of the model (currently output as a comment in the generated code)
description: 'This is a model which adds numbers. Based on the ccm u1_count.py tutorial.'

// A list of authors. These are output as comments in the generated code.
authors {
    'Andy Maloney <asmaloney@gmail.com>'
}

// Examples of starting goals to use when running the model
examples {
    [countFrom: 2 5 'starting']
    [countFrom: 1 3 'starting']
}

~~ config ~~

gactar {
    // Logging level can be 'min', 'info' (default), or 'detail'
    log_level: 'detail'

    // Show detailed information about activations (if available)
    trace_activations: false
}

// Declare chunk types and their layouts
chunks {
    [count: first second]
    [countFrom: start end status]
}

~~ init ~~

// Initialize the memory
memory {
    // Initializers can have an optional chunk name like this:
    one     [count: 0 1]
    two     [count: 1 2]
    three   [count: 2 3]
    four    [count: 3 4]
    five    [count: 4 5]
}

// Default goal
goal [countFrom: 2 5 'starting']

~~ productions ~~

// Name of the production
begin {
    // Optional description
    description: 'Starting point - first production to match'

    // Buffers to match
    match {
        goal [countFrom: ?start ?end 'starting']
    }
    // Statements to execute
    do {
        recall [count: ?start *]
        set goal to [countFrom: ?start ?end 'counting']
    }
}

increment {
    match {
        goal [countFrom: ?x !?x 'counting']
        retrieval [count: ?x ?next]
    }
    do {
        print ?x
        recall [count: ?next *]
        set goal.start to ?next
    }
}

end {
    match {
        goal [countFrom: ?x ?x 'counting']
    }
    do {
        print ?x
        stop
    }
}

You can find other examples of amod files in the examples folder.

amod Syntax

The EBNF (Extended Backus–Naur form) grammar for the amod file format may be found here.

Config Section

For amod configuration options and a list of supported modules, please see amod Config.

Buffers

In ACT-R, a buffer is the interface between modules, such as the goal & declarative memory modules, and the production system. At any point in time, each buffer either stores one instance of a chunk (see next section) or it is empty.

gactar uses several built-in buffers:

• goal stores the current goal
• retrieval stores a chunk retrieved from declarative memory using a recall statement (see below)
• imaginal stores context related to the current task

Chunks

A chunk is a piece of data that adheres to a user-defined structure. These chunks are stored as facts in the declarative memory and are placed in buffers where they may be matched, read, and modified.

The structure of each chunk type is declared in the config section. Chunks are delineated by square brackets. The first item is the chunk name and the items after the colon are the slot names:

[chunk_name: slot_name1 slot_name2 ...]

Examples:

[count: first second]
[word: form category]
[property: object attribute value]

Special Chunks

User-defined chunks must not begin with underscore ('_') - these are reserved for internal use. Currently there is one internal chunk - _status - which is used to check the status of buffers.

It is used in a match as follows:

match {
    goal [_status: full]
    retrieval [_status: error]
}

Valid statuses include:

• full - the buffer contains a chunk
• empty - the buffer does not contain a chunk
• busy - the buffer is in the process of being filled
• error - the last retrieval failed

Productions

A production is essentially a fancy if-then statement which checks some conditions and modifies state. In gactar, they take the form:

(production_name) {
    match {
        (some buffer conditions)
    }
    do {
        (some actions)
    }
}

This may be read as if (all buffer conditions match) then (do all the specified actions).

The production name is used to trace the output when running a model.

match

The match section matches buffers by pattern. These patterns match the chunks previously declared in the config section and are parsed to ensure their format is consistent.

Variables in production matches are preceded by ? (e.g. ?object). * denotes a wildcard (i.e. "match anything"). Using ! negates the logic.

Every match has an optional when clause to add constraints to variable matches (see example #3 below).

Example #1:

retrieval [count: ?x ?next]

This matches the retrieval buffer if it contains a count chunk, and assigns the contents to the two variables ?x and ?next.

Example #2:

goal [countFrom: ?x !?x counting]

This matches the goal buffer if it contains a countFrom chunk, the first two slots do not contain the same value, and the third slot contains counting. It assigns ?x the contents of the first slot.

Example #3:

goal [add: * ?num2 ?count ?sum] when (?count != ?num2)

This matches the goal buffer if it contains an add chunk, the first slot is any value, and the third slot is not the same value as the second. It assigns ?num2 the contents of the second slot, ?count the value of the third, and ?sum the value of the fourth.

do

The do section in the productions tells the system what actions to take if the buffers match. It uses a small language which currently understands the following commands:

command	example
clear (buffer name)+	clear goal, retrieval
print (string or var or number)+	print 'text', ?var, 42
recall (pattern)	recall [car: ?colour]
set (buffer name).(slot name) to (string or var or number)	set goal.wall_colour to ?colour
set (buffer name) to (pattern)	set goal to [start: 6 nil]
stop	stop

Example Production #1

increment {
    match {
        goal [countFrom: ?x !?x counting]
        retrieval [count: ?x ?next]
    }
    do {
        print ?x
        recall [count: ?next ?]
        set goal.start to ?next
    }
}

This production is called increment. It attempts to match the goal buffer to a countFrom chunk, and the retrieval buffer to a count chunk. If they match, then it will print the contents of the ?x variable, lookup a count chunk in memory and set the retrieval buffer to it, and set the start slot of the goal buffer to the contents of the variable ?next.

Example Production #2

done {
    match {
        goal [parsing_goal: * * ?parsed printing]
        imaginal [sentence: nil * *]
    }
    do {
        print ?parsed
        set goal.task to 'done'
        clear imaginal, goal
    }
}

This production is called done. It attempts to match the goal buffer to a parsing_goal chunk, and the imaginal buffer to a sentence chunk. If they match, then it will print the contents of the ?parsed variable, set the task slot of the goal buffer to 'done', and clear both the imaginal and goal buffers.

amod Processing

The following diagram shows how an amod file is processed by gactar. The partial paths at the bottom of the items is the path to the source code responsible for that part of the processing.

Reference

If you need to reference this project, I wrote up a technical note which may be found on ResearchGate.

Title: gactar: A Tool For Exploring ACT-R Modelling

DOI: 10.13140/RG.2.2.25387.36642