legacydb

Documentation

Index

• func IsError(err error, code ErrorCode) bool
• func RegisterDriver(driver Driver) error
• func SupportedDrivers() []string
• func UseLogger(logger log.Logger)
• type BlockRegion
• type Bucket
• type Cursor
• type DB
  • func Create(dbType string, args ...interface{}) (DB, error)
  • func Open(dbType string, args ...interface{}) (DB, error)
• type Driver
• type Error
  • func (e Error) Error() string
• type ErrorCode
  • func (e ErrorCode) String() string
• type Tx

Functions

func IsError

func IsError(err error, code ErrorCode) bool

IsError returns whether err is an Error with a matching error code.

func RegisterDriver

func RegisterDriver(driver Driver) error

RegisterDriver adds a backend database driver to available interfaces. ErrDbTypeRegistered will be retruned if the database type for the driver has already been registered.

func SupportedDrivers

func SupportedDrivers() []string

SupportedDrivers returns a slice of strings that represent the database drivers that have been registered and are therefore supported.

func UseLogger

func UseLogger(logger log.Logger)

UseLogger uses a specified Logger to the registered database drivers .

Types

type BlockRegion

type BlockRegion struct {
	Hash   *hash.Hash
	Offset uint32
	Len    uint32
}

BlockRegion specifies a particular region of a block identified by the specified hash, given an offset and length.

type Bucket

type Bucket interface {
	// Bucket retrieves a nested bucket with the given key.  Returns nil if
	// the bucket does not exist.
	Bucket(key []byte) Bucket

	// CreateBucket creates and returns a new nested bucket with the given
	// key.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBucketExists if the bucket already exists
	//   - ErrBucketNameRequired if the key is empty
	//   - ErrIncompatibleValue if the key is otherwise invalid for the
	//     particular implementation
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	CreateBucket(key []byte) (Bucket, error)

	// CreateBucketIfNotExists creates and returns a new nested bucket with
	// the given key if it does not already exist.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBucketNameRequired if the key is empty
	//   - ErrIncompatibleValue if the key is otherwise invalid for the
	//     particular implementation
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	CreateBucketIfNotExists(key []byte) (Bucket, error)

	// DeleteBucket removes a nested bucket with the given key.  This also
	// includes removing all nested buckets and keys under the bucket being
	// deleted.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBucketNotFound if the specified bucket does not exist
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	DeleteBucket(key []byte) error

	// ForEach invokes the passed function with every key/value pair in the
	// bucket.  This does not include nested buckets or the key/value pairs
	// within those nested buckets.
	//
	// WARNING: It is not safe to mutate data while iterating with this
	// method.  Doing so may cause the underlying cursor to be invalidated
	// and return unexpected keys and/or values.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrTxClosed if the transaction has already been closed
	//
	// NOTE: The slices returned by this function are only valid during a
	// transaction.  Attempting to access them after a transaction has ended
	// results in undefined behavior.  Additionally, the slices must NOT
	// be modified by the caller.  These constraints prevent additional data
	// copies and allows support for memory-mapped database implementations.
	ForEach(func(k, v []byte) error) error

	// ForEachBucket invokes the passed function with the key of every
	// nested bucket in the current bucket.  This does not include any
	// nested buckets within those nested buckets.
	//
	// WARNING: It is not safe to mutate data while iterating with this
	// method.  Doing so may cause the underlying cursor to be invalidated
	// and return unexpected keys and/or values.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrTxClosed if the transaction has already been closed
	//
	// NOTE: The keys returned by this function are only valid during a
	// transaction.  Attempting to access them after a transaction has ended
	// results in undefined behavior.  This constraint prevents additional
	// data copies and allows support for memory-mapped database
	// implementations.
	ForEachBucket(func(k []byte) error) error

	// Cursor returns a new cursor, allowing for iteration over the bucket's
	// key/value pairs and nested buckets in forward or backward order.
	//
	// You must seek to a position using the First, Last, or Seek functions
	// before calling the Next, Prev, Key, or Value functions.  Failure to
	// do so will result in the same return values as an exhausted cursor,
	// which is false for the Prev and Next functions and nil for Key and
	// Value functions.
	Cursor() Cursor

	// Writable returns whether or not the bucket is writable.
	Writable() bool

	// Put saves the specified key/value pair to the bucket.  Keys that do
	// not already exist are added and keys that already exist are
	// overwritten.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrKeyRequired if the key is empty
	//   - ErrIncompatibleValue if the key is the same as an existing bucket
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	//
	// NOTE: The slices passed to this function must NOT be modified by the
	// caller.  This constraint prevents the requirement for additional data
	// copies and allows support for memory-mapped database implementations.
	Put(key, value []byte) error

	// Get returns the value for the given key.  Returns nil if the key does
	// not exist in this bucket.  An empty slice is returned for keys that
	// exist but have no value assigned.
	//
	// NOTE: The value returned by this function is only valid during a
	// transaction.  Attempting to access it after a transaction has ended
	// results in undefined behavior.  Additionally, the value must NOT
	// be modified by the caller.  These constraints prevent additional data
	// copies and allows support for memory-mapped database implementations.
	Get(key []byte) []byte

	// Delete removes the specified key from the bucket.  Deleting a key
	// that does not exist does not return an error.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrKeyRequired if the key is empty
	//   - ErrIncompatibleValue if the key is the same as an existing bucket
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	Delete(key []byte) error
}

Bucket represents a collection of key/value pairs.

type Cursor

type Cursor interface {
	// Bucket returns the bucket the cursor was created for.
	Bucket() Bucket

	// Delete removes the current key/value pair the cursor is at without
	// invalidating the cursor.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrIncompatibleValue if attempted when the cursor points to a
	//     nested bucket
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	Delete() error

	// First positions the cursor at the first key/value pair and returns
	// whether or not the pair exists.
	First() bool

	// Last positions the cursor at the last key/value pair and returns
	// whether or not the pair exists.
	Last() bool

	// Next moves the cursor one key/value pair forward and returns whether
	// or not the pair exists.
	Next() bool

	// Prev moves the cursor one key/value pair backward and returns whether
	// or not the pair exists.
	Prev() bool

	// Seek positions the cursor at the first key/value pair that is greater
	// than or equal to the passed seek key.  Returns whether or not the
	// pair exists.
	Seek(seek []byte) bool

	// Key returns the current key the cursor is pointing to.
	Key() []byte

	// Value returns the current value the cursor is pointing to.  This will
	// be nil for nested buckets.
	Value() []byte
}

Cursor represents a cursor over key/value pairs and nested buckets of a bucket.

Note that open cursors are not tracked on bucket changes and any modifications to the bucket, with the exception of Cursor.Delete, invalidates the cursor. After invalidation, the cursor must be repositioned, or the keys and values returned may be unpredictable.

type DB

type DB interface {
	// Type returns the database driver type the current database instance
	// was created with.
	Type() string

	// View invokes the passed function in the context of a managed
	// read-only transaction.  Any errors returned from the user-supplied
	// function are returned from this function.
	//
	// Calling Rollback or Commit on the transaction passed to the
	// user-supplied function will result in a panic.
	View(fn func(tx Tx) error) error

	// Update invokes the passed function in the context of a managed
	// read-write transaction.  Any errors returned from the user-supplied
	// function will cause the transaction to be rolled back and are
	// returned from this function.  Otherwise, the transaction is committed
	// when the user-supplied function returns a nil error.
	//
	// Calling Rollback or Commit on the transaction passed to the
	// user-supplied function will result in a panic.
	Update(fn func(tx Tx) error) error

	// Close cleanly shuts down the database and syncs all data.  It will
	// block until all database transactions have been finalized (rolled
	// back or committed).
	Close() error
}

DB provides a generic interface that is used to store blocks and related metadata. This interface is intended to be agnostic to the actual mechanism used for backend data storage. The RegisterDriver function can be used to add a new backend data storage method.

This interface is divided into two distinct categories of functionality.

The first category is atomic metadata storage with bucket support. This is accomplished through the use of database transactions.

The second category is generic block storage. This functionality is intentionally separate because the mechanism used for block storage may or may not be the same mechanism used for metadata storage. For example, it is often more efficient to store the block data as flat files while the metadata is kept in a database. However, this interface aims to be generic enough to support blocks in the database too, if needed by a particular backend.

func Create

func Create(dbType string, args ...interface{}) (DB, error)

Create initializes and opens a database for the specified type. The arguments are specific to the database type driver. See the documentation for the database driver for further details.

ErrDbUnknownType will be returned if the the database type is not registered.

func Open

func Open(dbType string, args ...interface{}) (DB, error)

Open opens an existing database for the specified type. The arguments are specific to the database type driver. See the documentation for the database driver for further details.

ErrDbUnknownType will be returned if the the database type is not registered.

type Driver

type Driver struct {
	// DbType is the identifier used to uniquely identify a specific
	// database driver.  There can be only one driver with the same name.
	DbType string

	// Create is the function that will be invoked with all user-specified
	// arguments to create the database.  This function must return
	// ErrDbExists if the database already exists.
	Create func(args ...interface{}) (DB, error)

	// Open is the function that will be invoked with all user-specified
	// arguments to open the database.  This function must return
	// ErrDbDoesNotExist if the database has not already been created.
	Open func(args ...interface{}) (DB, error)

	// UseLogger uses a specified Logger to output package logging info.
	UseLogger func(logger log.Logger)
}

Driver defines a structure for backend drivers to use when they register themselves as a backend which implements the DB interface.

type Error

type Error struct {
	ErrorCode   ErrorCode // Describes the kind of error
	Description string    // Human readable description of the issue
	Err         error     // Underlying error
}

Error provides a single type for errors that can happen during database operation. It is used to indicate several types of failures including errors with caller requests such as specifying invalid block regions or attempting to access data against closed database transactions, driver errors, errors retrieving data, and errors communicating with database servers.

The caller can use type assertions to determine if an error is an Error and access the ErrorCode field to ascertain the specific reason for the failure.

The ErrDriverSpecific error code will also have the Err field set with the underlying error. Depending on the backend driver, the Err field might be set to the underlying error for other error codes as well.

func (Error) Error

func (e Error) Error() string

Error satisfies the error interface and prints human-readable errors.

type ErrorCode

type ErrorCode int

ErrorCode identifies a kind of error.

const (

	// ErrDbTypeRegistered indicates two different database drivers
	// attempt to register with the name database type.
	ErrDbTypeRegistered ErrorCode = iota

	// ErrDbUnknownType indicates there is no driver registered for
	// the specified database type.
	ErrDbUnknownType

	// ErrDbDoesNotExist indicates open is called for a database that
	// does not exist.
	ErrDbDoesNotExist

	// ErrDbExists indicates create is called for a database that
	// already exists.
	ErrDbExists

	// ErrDbNotOpen indicates a database instance is accessed before
	// it is opened or after it is closed.
	ErrDbNotOpen

	// ErrDbAlreadyOpen indicates open was called on a database that
	// is already open.
	ErrDbAlreadyOpen

	// ErrInvalid indicates the specified database is not valid.
	ErrInvalid

	// ErrCorruption indicates a checksum failure occurred which invariably
	// means the database is corrupt.
	ErrCorruption

	// ErrTxClosed indicates an attempt was made to commit or rollback a
	// transaction that has already had one of those operations performed.
	ErrTxClosed

	// ErrTxNotWritable indicates an operation that requires write access to
	// the database was attempted against a read-only transaction.
	ErrTxNotWritable

	// ErrBucketNotFound indicates an attempt to access a bucket that has
	// not been created yet.
	ErrBucketNotFound

	// ErrBucketExists indicates an attempt to create a bucket that already
	// exists.
	ErrBucketExists

	// ErrBucketNameRequired indicates an attempt to create a bucket with a
	// blank name.
	ErrBucketNameRequired

	// ErrKeyRequired indicates at attempt to insert a zero-length key.
	ErrKeyRequired

	// ErrKeyTooLarge indicates an attmempt to insert a key that is larger
	// than the max allowed key size.  The max key size depends on the
	// specific backend driver being used.  As a general rule, key sizes
	// should be relatively, so this should rarely be an issue.
	ErrKeyTooLarge

	// ErrValueTooLarge indicates an attmpt to insert a value that is larger
	// than max allowed value size.  The max key size depends on the
	// specific backend driver being used.
	ErrValueTooLarge

	// ErrIncompatibleValue indicates the value in question is invalid for
	// the specific requested operation.  For example, trying create or
	// delete a bucket with an existing non-bucket key, attempting to create
	// or delete a non-bucket key with an existing bucket key, or trying to
	// delete a value via a cursor when it points to a nested bucket.
	ErrIncompatibleValue

	// ErrBlockNotFound indicates a block with the provided hash does not
	// exist in the database.
	ErrBlockNotFound

	// ErrBlockExists indicates a block with the provided hash already
	// exists in the database.
	ErrBlockExists

	// ErrBlockRegionInvalid indicates a region that exceeds the bounds of
	// the specified block was requested.  When the hash provided by the
	// region does not correspond to an existing block, the error will be
	// ErrBlockNotFound instead.
	ErrBlockRegionInvalid

	// ErrDriverSpecific indicates the Err field is a driver-specific error.
	// This provides a mechanism for drivers to plug-in their own custom
	// errors for any situations which aren't already covered by the error
	// codes provided by this package.
	ErrDriverSpecific
)

These constants are used to identify a specific database Error.

func (ErrorCode) String

func (e ErrorCode) String() string

String returns the ErrorCode as a human-readable name.

type Tx

type Tx interface {
	// Metadata returns the top-most bucket for all metadata storage.
	Metadata() Bucket

	// StoreBlock stores the provided block into the database.  There are no
	// checks to ensure the block connects to a previous block, contains
	// double spends, or any additional functionality such as transaction
	// indexing.  It simply stores the block in the database.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockExists when the block hash already exists
	//   - ErrTxNotWritable if attempted against a read-only transaction
	//   - ErrTxClosed if the transaction has already been closed
	//
	// Other errors are possible depending on the implementation.
	StoreBlock(block *types.SerializedBlock) error

	// HasBlock returns whether or not a block with the given hash exists
	// in the database.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrTxClosed if the transaction has already been closed
	//
	// Other errors are possible depending on the implementation.
	HasBlock(hash *hash.Hash) (bool, error)

	// HasBlocks returns whether or not the blocks with the provided hashes
	// exist in the database.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrTxClosed if the transaction has already been closed
	//
	// Other errors are possible depending on the implementation.
	HasBlocks(hashes []hash.Hash) ([]bool, error)

	// FetchBlockHeader returns the raw serialized bytes for the block
	// header identified by the given hash.  The raw bytes are in the format
	// returned by Serialize on a wire.BlockHeader.
	//
	// It is highly recommended to use this function (or FetchBlockHeaders)
	// to obtain block headers over the FetchBlockRegion(s) functions since
	// it provides the backend drivers the freedom to perform very specific
	// optimizations which can result in significant speed advantages when
	// working with headers.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if the requested block hash does not exist
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlockHeader(hash *hash.Hash) ([]byte, error)

	// FetchBlockHeaders returns the raw serialized bytes for the block
	// headers identified by the given hashes.  The raw bytes are in the
	// format returned by Serialize on a wire.BlockHeader.
	//
	// It is highly recommended to use this function (or FetchBlockHeader)
	// to obtain block headers over the FetchBlockRegion(s) functions since
	// it provides the backend drivers the freedom to perform very specific
	// optimizations which can result in significant speed advantages when
	// working with headers.
	//
	// Furthermore, depending on the specific implementation, this function
	// can be more efficient for bulk loading multiple block headers than
	// loading them one-by-one with FetchBlockHeader.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if any of the request block hashes do not exist
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlockHeaders(hashes []hash.Hash) ([][]byte, error)

	// FetchBlock returns the raw serialized bytes for the block identified
	// by the given hash.  The raw bytes are in the format returned by
	// Serialize on a wire.MsgBlock.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if the requested block hash does not exist
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlock(hash *hash.Hash) ([]byte, error)

	// FetchBlocks returns the raw serialized bytes for the blocks
	// identified by the given hashes.  The raw bytes are in the format
	// returned by Serialize on a wire.MsgBlock.
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if the any of the requested block hashes do not
	//     exist
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlocks(hashes []hash.Hash) ([][]byte, error)

	// FetchBlockRegion returns the raw serialized bytes for the given
	// block region.
	//
	// For example, it is possible to directly extract transactions and/or
	// scripts from a block with this function.  Depending on the backend
	// implementation, this can provide significant savings by avoiding the
	// need to load entire blocks.
	//
	// The raw bytes are in the format returned by Serialize on a
	// wire.MsgBlock and the Offset field in the provided BlockRegion is
	// zero-based and relative to the start of the block (byte 0).
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if the requested block hash does not exist
	//   - ErrBlockRegionInvalid if the region exceeds the bounds of the
	//     associated block
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlockRegion(region *BlockRegion) ([]byte, error)

	// FetchBlockRegions returns the raw serialized bytes for the given
	// block regions.
	//
	// For example, it is possible to directly extract transactions and/or
	// scripts from various blocks with this function.  Depending on the
	// backend implementation, this can provide significant savings by
	// avoiding the need to load entire blocks.
	//
	// The raw bytes are in the format returned by Serialize on a
	// wire.MsgBlock and the Offset fields in the provided BlockRegions are
	// zero-based and relative to the start of the block (byte 0).
	//
	// The interface contract guarantees at least the following errors will
	// be returned (other implementation-specific errors are possible):
	//   - ErrBlockNotFound if any of the requested block hashed do not
	//     exist
	//   - ErrBlockRegionInvalid if one or more region exceed the bounds of
	//     the associated block
	//   - ErrTxClosed if the transaction has already been closed
	//   - ErrCorruption if the database has somehow become corrupted
	//
	// NOTE: The data returned by this function is only valid during a
	// database transaction.  Attempting to access it after a transaction
	// has ended results in undefined behavior.  This constraint prevents
	// additional data copies and allows support for memory-mapped database
	// implementations.
	FetchBlockRegions(regions []BlockRegion) ([][]byte, error)

	// Commit commits all changes that have been made to the metadata or
	// block storage.  Depending on the backend implementation this could be
	// to a cache that is periodically synced to persistent storage or
	// directly to persistent storage.  In any case, all transactions which
	// are started after the commit finishes will include all changes made
	// by this transaction.  Calling this function on a managed transaction
	// will result in a panic.
	Commit() error

	// Rollback undoes all changes that have been made to the metadata or
	// block storage.  Calling this function on a managed transaction will
	// result in a panic.
	Rollback() error
}

Tx represents a database transaction. It can either by read-only or read-write. The transaction provides a metadata bucket against which all read and writes occur.

As would be expected with a transaction, no changes will be saved to the database until it has been committed. The transaction will only provide a view of the database at the time it was created. Transactions should not be long running operations.