Documentation ¶
Overview ¶
Package capability provides utilities for manipulating POSIX capabilities.
Index ¶
Constants ¶
View Source
const ( EFFECTIVE CapType = 1 << iota PERMITTED INHERITABLE BOUNDING AMBIENT CAPS = EFFECTIVE | PERMITTED | INHERITABLE BOUNDS = BOUNDING AMBS = AMBIENT )
View Source
const ( // In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this // overrides the restriction of changing file ownership and group // ownership. CAP_CHOWN = Cap(0) // Override all DAC access, including ACL execute access if // [_POSIX_ACL] is defined. Excluding DAC access covered by // CAP_LINUX_IMMUTABLE. CAP_DAC_OVERRIDE = Cap(1) // Overrides all DAC restrictions regarding read and search on files // and directories, including ACL restrictions if [_POSIX_ACL] is // defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. CAP_DAC_READ_SEARCH = Cap(2) // Overrides all restrictions about allowed operations on files, where // file owner ID must be equal to the user ID, except where CAP_FSETID // is applicable. It doesn't override MAC and DAC restrictions. CAP_FOWNER = Cap(3) // Overrides the following restrictions that the effective user ID // shall match the file owner ID when setting the S_ISUID and S_ISGID // bits on that file; that the effective group ID (or one of the // supplementary group IDs) shall match the file owner ID when setting // the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are // cleared on successful return from chown(2) (not implemented). CAP_FSETID = Cap(4) // Overrides the restriction that the real or effective user ID of a // process sending a signal must match the real or effective user ID // of the process receiving the signal. CAP_KILL = Cap(5) // Allows setgid(2) manipulation // Allows setgroups(2) // Allows forged gids on socket credentials passing. CAP_SETGID = Cap(6) // Allows set*uid(2) manipulation (including fsuid). // Allows forged pids on socket credentials passing. CAP_SETUID = Cap(7) // Without VFS support for capabilities: // Transfer any capability in your permitted set to any pid, // remove any capability in your permitted set from any pid // With VFS support for capabilities (neither of above, but) // Add any capability from current's capability bounding set // to the current process' inheritable set // Allow taking bits out of capability bounding set // Allow modification of the securebits for a process CAP_SETPCAP = Cap(8) // Allow modification of S_IMMUTABLE and S_APPEND file attributes CAP_LINUX_IMMUTABLE = Cap(9) // Allows binding to TCP/UDP sockets below 1024 // Allows binding to ATM VCIs below 32 CAP_NET_BIND_SERVICE = Cap(10) // Allow broadcasting, listen to multicast CAP_NET_BROADCAST = Cap(11) // Allow interface configuration // Allow administration of IP firewall, masquerading and accounting // Allow setting debug option on sockets // Allow modification of routing tables // Allow setting arbitrary process / process group ownership on // sockets // Allow binding to any address for transparent proxying (also via NET_RAW) // Allow setting TOS (type of service) // Allow setting promiscuous mode // Allow clearing driver statistics // Allow multicasting // Allow read/write of device-specific registers // Allow activation of ATM control sockets CAP_NET_ADMIN = Cap(12) // Allow use of RAW sockets // Allow use of PACKET sockets // Allow binding to any address for transparent proxying (also via NET_ADMIN) CAP_NET_RAW = Cap(13) // Allow locking of shared memory segments // Allow mlock and mlockall (which doesn't really have anything to do // with IPC) CAP_IPC_LOCK = Cap(14) // Override IPC ownership checks CAP_IPC_OWNER = Cap(15) // Insert and remove kernel modules - modify kernel without limit CAP_SYS_MODULE = Cap(16) // Allow ioperm/iopl access // Allow sending USB messages to any device via /proc/bus/usb CAP_SYS_RAWIO = Cap(17) // Allow use of chroot() CAP_SYS_CHROOT = Cap(18) // Allow ptrace() of any process CAP_SYS_PTRACE = Cap(19) // Allow configuration of process accounting CAP_SYS_PACCT = Cap(20) // Allow configuration of the secure attention key // Allow administration of the random device // Allow examination and configuration of disk quotas // Allow setting the domainname // Allow setting the hostname // Allow calling bdflush() // Allow mount() and umount(), setting up new smb connection // Allow some autofs root ioctls // Allow nfsservctl // Allow VM86_REQUEST_IRQ // Allow to read/write pci config on alpha // Allow irix_prctl on mips (setstacksize) // Allow flushing all cache on m68k (sys_cacheflush) // Allow removing semaphores // Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores // and shared memory // Allow locking/unlocking of shared memory segment // Allow turning swap on/off // Allow forged pids on socket credentials passing // Allow setting readahead and flushing buffers on block devices // Allow setting geometry in floppy driver // Allow turning DMA on/off in xd driver // Allow administration of md devices (mostly the above, but some // extra ioctls) // Allow tuning the ide driver // Allow access to the nvram device // Allow administration of apm_bios, serial and bttv (TV) device // Allow manufacturer commands in isdn CAPI support driver // Allow reading non-standardized portions of pci configuration space // Allow DDI debug ioctl on sbpcd driver // Allow setting up serial ports // Allow sending raw qic-117 commands // Allow enabling/disabling tagged queuing on SCSI controllers and sending // arbitrary SCSI commands // Allow setting encryption key on loopback filesystem // Allow setting zone reclaim policy CAP_SYS_ADMIN = Cap(21) // Allow use of reboot() CAP_SYS_BOOT = Cap(22) // Allow raising priority and setting priority on other (different // UID) processes // Allow use of FIFO and round-robin (realtime) scheduling on own // processes and setting the scheduling algorithm used by another // process. // Allow setting cpu affinity on other processes CAP_SYS_NICE = Cap(23) // Override resource limits. Set resource limits. // Override quota limits. // Override reserved space on ext2 filesystem // Modify data journaling mode on ext3 filesystem (uses journaling // resources) // NOTE: ext2 honors fsuid when checking for resource overrides, so // you can override using fsuid too // Override size restrictions on IPC message queues // Allow more than 64hz interrupts from the real-time clock // Override max number of consoles on console allocation // Override max number of keymaps CAP_SYS_RESOURCE = Cap(24) // Allow manipulation of system clock // Allow irix_stime on mips // Allow setting the real-time clock CAP_SYS_TIME = Cap(25) // Allow configuration of tty devices // Allow vhangup() of tty CAP_SYS_TTY_CONFIG = Cap(26) // Allow the privileged aspects of mknod() CAP_MKNOD = Cap(27) // Allow taking of leases on files CAP_LEASE = Cap(28) CAP_AUDIT_WRITE = Cap(29) CAP_AUDIT_CONTROL = Cap(30) CAP_SETFCAP = Cap(31) // Override MAC access. // The base kernel enforces no MAC policy. // An LSM may enforce a MAC policy, and if it does and it chooses // to implement capability based overrides of that policy, this is // the capability it should use to do so. CAP_MAC_OVERRIDE = Cap(32) // Allow MAC configuration or state changes. // The base kernel requires no MAC configuration. // An LSM may enforce a MAC policy, and if it does and it chooses // to implement capability based checks on modifications to that // policy or the data required to maintain it, this is the // capability it should use to do so. CAP_MAC_ADMIN = Cap(33) // Allow configuring the kernel's syslog (printk behaviour) CAP_SYSLOG = Cap(34) // Allow triggering something that will wake the system CAP_WAKE_ALARM = Cap(35) // Allow preventing system suspends CAP_BLOCK_SUSPEND = Cap(36) // Allow reading audit messages from the kernel CAP_AUDIT_READ = Cap(37) )
POSIX-draft defined capabilities.
Variables ¶
View Source
var ( // Highest valid capability of the running kernel. CAP_LAST_CAP = Cap(63) )
Functions ¶
This section is empty.
Types ¶
type Capabilities ¶
type Capabilities interface { // Get check whether a capability present in the given // capabilities set. The 'which' value should be one of EFFECTIVE, // PERMITTED, INHERITABLE, BOUNDING or AMBIENT. Get(which CapType, what Cap) bool // Empty check whether all capability bits of the given capabilities // set are zero. The 'which' value should be one of EFFECTIVE, // PERMITTED, INHERITABLE, BOUNDING or AMBIENT. Empty(which CapType) bool // Full check whether all capability bits of the given capabilities // set are one. The 'which' value should be one of EFFECTIVE, // PERMITTED, INHERITABLE, BOUNDING or AMBIENT. Full(which CapType) bool // Set sets capabilities of the given capabilities sets. The // 'which' value should be one or combination (OR'ed) of EFFECTIVE, // PERMITTED, INHERITABLE, BOUNDING or AMBIENT. Set(which CapType, caps ...Cap) // Unset unsets capabilities of the given capabilities sets. The // 'which' value should be one or combination (OR'ed) of EFFECTIVE, // PERMITTED, INHERITABLE, BOUNDING or AMBIENT. Unset(which CapType, caps ...Cap) // Fill sets all bits of the given capabilities kind to one. The // 'kind' value should be one or combination (OR'ed) of CAPS, // BOUNDS or AMBS. Fill(kind CapType) // Clear sets all bits of the given capabilities kind to zero. The // 'kind' value should be one or combination (OR'ed) of CAPS, // BOUNDS or AMBS. Clear(kind CapType) // String return current capabilities state of the given capabilities // set as string. The 'which' value should be one of EFFECTIVE, // PERMITTED, INHERITABLE BOUNDING or AMBIENT StringCap(which CapType) string // String return current capabilities state as string. String() string // Load load actual capabilities value. This will overwrite all // outstanding changes. Load() error // Apply apply the capabilities settings, so all changes will take // effect. Apply(kind CapType) error }
func NewFile ¶
func NewFile(name string) (Capabilities, error)
NewFile create new initialized Capabilities object for given named file.
func NewPid ¶
func NewPid(pid int) (Capabilities, error)
NewPid create new initialized Capabilities object for given pid when it is nonzero, or for the current pid if pid is 0
Source Files ¶
Click to show internal directories.
Click to hide internal directories.