Documentation
¶
Overview ¶
Package gzip implements reading and writing of gzip format compressed files, as specified in RFC 1952.
Example (CompressingReader) ¶
package main
import (
"compress/gzip"
"io"
"log"
"net/http"
"net/http/httptest"
"os"
"strings"
)
func main() {
// This is an example of writing a compressing reader.
// This can be useful for an HTTP client body, as shown.
const testdata = "the data to be compressed"
// This HTTP handler is just for testing purposes.
handler := http.HandlerFunc(func(rw http.ResponseWriter, req *http.Request) {
zr, err := gzip.NewReader(req.Body)
if err != nil {
log.Fatal(err)
}
// Just output the data for the example.
if _, err := io.Copy(os.Stdout, zr); err != nil {
log.Fatal(err)
}
})
ts := httptest.NewServer(handler)
defer ts.Close()
// The remainder is the example code.
// The data we want to compress, as an io.Reader
dataReader := strings.NewReader(testdata)
// bodyReader is the body of the HTTP request, as an io.Reader.
// httpWriter is the body of the HTTP request, as an io.Writer.
bodyReader, httpWriter := io.Pipe()
// Make sure that bodyReader is always closed, so that the
// goroutine below will always exit.
defer bodyReader.Close()
// gzipWriter compresses data to httpWriter.
gzipWriter := gzip.NewWriter(httpWriter)
// errch collects any errors from the writing goroutine.
errch := make(chan error, 1)
go func() {
defer close(errch)
sentErr := false
sendErr := func(err error) {
if !sentErr {
errch <- err
sentErr = true
}
}
// Copy our data to gzipWriter, which compresses it to
// gzipWriter, which feeds it to bodyReader.
if _, err := io.Copy(gzipWriter, dataReader); err != nil && err != io.ErrClosedPipe {
sendErr(err)
}
if err := gzipWriter.Close(); err != nil && err != io.ErrClosedPipe {
sendErr(err)
}
if err := httpWriter.Close(); err != nil && err != io.ErrClosedPipe {
sendErr(err)
}
}()
// Send an HTTP request to the test server.
req, err := http.NewRequest("PUT", ts.URL, bodyReader)
if err != nil {
log.Fatal(err)
}
// Note that passing req to http.Client.Do promises that it
// will close the body, in this case bodyReader.
resp, err := ts.Client().Do(req)
if err != nil {
log.Fatal(err)
}
// Check whether there was an error compressing the data.
if err := <-errch; err != nil {
log.Fatal(err)
}
// For this example we don't care about the response.
resp.Body.Close()
}
Output: the data to be compressed
Example (WriterReader) ¶
package main
import (
"bytes"
"compress/gzip"
"fmt"
"io"
"log"
"os"
"time"
)
func main() {
var buf bytes.Buffer
zw := gzip.NewWriter(&buf)
// Setting the Header fields is optional.
zw.Name = "a-new-hope.txt"
zw.Comment = "an epic space opera by George Lucas"
zw.ModTime = time.Date(1977, time.May, 25, 0, 0, 0, 0, time.UTC)
_, err := zw.Write([]byte("A long time ago in a galaxy far, far away..."))
if err != nil {
log.Fatal(err)
}
if err := zw.Close(); err != nil {
log.Fatal(err)
}
zr, err := gzip.NewReader(&buf)
if err != nil {
log.Fatal(err)
}
fmt.Printf("Name: %s\nComment: %s\nModTime: %s\n\n", zr.Name, zr.Comment, zr.ModTime.UTC())
if _, err := io.Copy(os.Stdout, zr); err != nil {
log.Fatal(err)
}
if err := zr.Close(); err != nil {
log.Fatal(err)
}
}
Output: Name: a-new-hope.txt Comment: an epic space opera by George Lucas ModTime: 1977-05-25 00:00:00 +0000 UTC A long time ago in a galaxy far, far away...
Index ¶
Examples ¶
Constants ¶
const ( NoCompression = flate.NoCompression BestSpeed = flate.BestSpeed BestCompression = flate.BestCompression DefaultCompression = flate.DefaultCompression HuffmanOnly = flate.HuffmanOnly )
These constants are copied from the flate package, so that code that imports "compress/gzip" does not also have to import "compress/flate".
Variables ¶
var ( // ErrChecksum is returned when reading GZIP data that has an invalid checksum. ErrChecksum = errors.New("gzip: invalid checksum") // ErrHeader is returned when reading GZIP data that has an invalid header. ErrHeader = errors.New("gzip: invalid header") )
Functions ¶
This section is empty.
Types ¶
type Header ¶
type Header struct {
Comment string // comment
Extra []byte // "extra data"
ModTime time.Time // modification time
Name string // file name
OS byte // operating system type
}
The gzip file stores a header giving metadata about the compressed file. That header is exposed as the fields of the Writer and Reader structs.
Strings must be UTF-8 encoded and may only contain Unicode code points U+0001 through U+00FF, due to limitations of the GZIP file format.
type Reader ¶
type Reader struct {
Header // valid after NewReader or Reader.Reset
// contains filtered or unexported fields
}
A Reader is an io.Reader that can be read to retrieve uncompressed data from a gzip-format compressed file.
In general, a gzip file can be a concatenation of gzip files, each with its own header. Reads from the Reader return the concatenation of the uncompressed data of each. Only the first header is recorded in the Reader fields.
Gzip files store a length and checksum of the uncompressed data. The Reader will return an ErrChecksum when Reader.Read reaches the end of the uncompressed data if it does not have the expected length or checksum. Clients should treat data returned by Reader.Read as tentative until they receive the io.EOF marking the end of the data.
func NewReader ¶
NewReader creates a new Reader reading the given reader. If r does not also implement io.ByteReader, the decompressor may read more data than necessary from r.
It is the caller's responsibility to call Close on the Reader when done.
The [Reader.Header] fields will be valid in the Reader returned.
func (*Reader) Close ¶
Close closes the Reader. It does not close the underlying io.Reader. In order for the GZIP checksum to be verified, the reader must be fully consumed until the io.EOF.
func (*Reader) Multistream ¶ added in go1.4
Multistream controls whether the reader supports multistream files.
If enabled (the default), the Reader expects the input to be a sequence of individually gzipped data streams, each with its own header and trailer, ending at EOF. The effect is that the concatenation of a sequence of gzipped files is treated as equivalent to the gzip of the concatenation of the sequence. This is standard behavior for gzip readers.
Calling Multistream(false) disables this behavior; disabling the behavior can be useful when reading file formats that distinguish individual gzip data streams or mix gzip data streams with other data streams. In this mode, when the Reader reaches the end of the data stream, Reader.Read returns io.EOF. The underlying reader must implement io.ByteReader in order to be left positioned just after the gzip stream. To start the next stream, call z.Reset(r) followed by z.Multistream(false). If there is no next stream, z.Reset(r) will return io.EOF.
Example ¶
package main
import (
"bytes"
"compress/gzip"
"fmt"
"io"
"log"
"os"
"time"
)
func main() {
var buf bytes.Buffer
zw := gzip.NewWriter(&buf)
var files = []struct {
name string
comment string
modTime time.Time
data string
}{
{"file-1.txt", "file-header-1", time.Date(2006, time.February, 1, 3, 4, 5, 0, time.UTC), "Hello Gophers - 1"},
{"file-2.txt", "file-header-2", time.Date(2007, time.March, 2, 4, 5, 6, 1, time.UTC), "Hello Gophers - 2"},
}
for _, file := range files {
zw.Name = file.name
zw.Comment = file.comment
zw.ModTime = file.modTime
if _, err := zw.Write([]byte(file.data)); err != nil {
log.Fatal(err)
}
if err := zw.Close(); err != nil {
log.Fatal(err)
}
zw.Reset(&buf)
}
zr, err := gzip.NewReader(&buf)
if err != nil {
log.Fatal(err)
}
for {
zr.Multistream(false)
fmt.Printf("Name: %s\nComment: %s\nModTime: %s\n\n", zr.Name, zr.Comment, zr.ModTime.UTC())
if _, err := io.Copy(os.Stdout, zr); err != nil {
log.Fatal(err)
}
fmt.Print("\n\n")
err = zr.Reset(&buf)
if err == io.EOF {
break
}
if err != nil {
log.Fatal(err)
}
}
if err := zr.Close(); err != nil {
log.Fatal(err)
}
}
Output: Name: file-1.txt Comment: file-header-1 ModTime: 2006-02-01 03:04:05 +0000 UTC Hello Gophers - 1 Name: file-2.txt Comment: file-header-2 ModTime: 2007-03-02 04:05:06 +0000 UTC Hello Gophers - 2
type Writer ¶
type Writer struct {
Header // written at first call to Write, Flush, or Close
// contains filtered or unexported fields
}
A Writer is an io.WriteCloser. Writes to a Writer are compressed and written to w.
func NewWriter ¶
NewWriter returns a new Writer. Writes to the returned writer are compressed and written to w.
It is the caller's responsibility to call Close on the Writer when done. Writes may be buffered and not flushed until Close.
Callers that wish to set the fields in Writer.Header must do so before the first call to Write, Flush, or Close.
func NewWriterLevel ¶
NewWriterLevel is like NewWriter but specifies the compression level instead of assuming DefaultCompression.
The compression level can be DefaultCompression, NoCompression, HuffmanOnly or any integer value between BestSpeed and BestCompression inclusive. The error returned will be nil if the level is valid.
func (*Writer) Close ¶
Close closes the Writer by flushing any unwritten data to the underlying io.Writer and writing the GZIP footer. It does not close the underlying io.Writer.
func (*Writer) Flush ¶ added in go1.1
Flush flushes any pending compressed data to the underlying writer.
It is useful mainly in compressed network protocols, to ensure that a remote reader has enough data to reconstruct a packet. Flush does not return until the data has been written. If the underlying writer returns an error, Flush returns that error.
In the terminology of the zlib library, Flush is equivalent to Z_SYNC_FLUSH.
Source Files